hello guys how are you ........I wish all are ok and fine
I've a big problem in my jasjam..
the 4 directions buttons and the choose button the OK buton and the START button aren't working
AS SHOW IN ATTACHMENT
but the rest ( Call,End,Choose 1,Choose2 ) working
and the buttons that sren'r working sometimes the right or the left direction works automatically Repeatedly goes right or left or up Repeatedly and rapidly .I was removed all screws and opened it to clean it . I cleaned it but still the same prob. somone told me that shield may be the main prob. but the touch screen works and everything everything except those buttons what can I do ?
48 preview no one can write any reply !!!!!!!!!!
I didn't expect that .............
Mate, just because we look doesn't mean we can help. I'm not going to suggest anything that may break your Hermes. For instance, I know hitting the Hermes with a brick repeatedly will make the problem go away simply because you'll need to replace the phone.
Technically your problem has now been answered, but I know I wouldn't be follow those instructions....
Related
man i am stuckin th whitescreen softspl my phone is on in the background i e i can hear things going on i can alsossyncwith it but i cannot sync via usb just ira what can i do, why can i not syncwith usb ,i cannot sync now cause i cant see screen to activate sync help how to get out of white screen :
alikhan321 said:
man i am stuckin th whitescreen softspl my phone is on in the background i e i can hear things going on i can alsossyncwith it but i cannot sync via usb just ira what can i do, why can i not syncwith usb ,i cannot sync now cause i cant see screen to activate sync help how to get out of white screen :
Click to expand...
Click to collapse
on the right side of your device is a little hole.
Your stylus has a pointy end.
Put the pointy end of your stylus into the hole, press softly untill you feel a "click".
Behold, the device reboots.
For future references, its called Resetting a device..
the-equinoxe said:
on the right side of your device is a little hole.
Your stylus has a pointy end.
Put the pointy end of your stylus into the hole, press softly untill you feel a "click".
Behold, the device reboots.
For future references, its called Resetting a device..
Click to expand...
Click to collapse
LOL nice one Eqx
duh
i done that it dont work man i need exprt advice help
alikhan321 said:
i done that it dont work man i need exprt advice help
Click to expand...
Click to collapse
Soft SPL is put to MEMORY, it's not FLASHED.
Rebooting the device will clear the memory.
Thus removing the sSPL.
Try pulling your battery for a few minutes.
Then put it back again and boot the device.
HELP
I Took Out The Battery For 1hr Still The White Screen,help
Took Out Sd Card Took Out Sim ???????????
Press and hold the top left and right sided buttons (Comm + Talk) and hit the reset switch. The screen should turn black, and a request to do a hard format will appear. Press the call button. That should do it
dferreira said:
Press and hold the top left and right sided buttons (Comm + Talk) and hit the reset switch. The screen should turn black, and a request to do a hard format will appear. Press the call button. That should do it
Click to expand...
Click to collapse
That is the exact same advice I PM-ed him.
yes done all that nothing yet just some white screen always on can hear background noices of the phone ,the leds working like normal
please help i love my wizard its been 3 days now my coldrx turkey is very hard now
That's odd... if he can hear the phone start menu going on... maybe you can do it again (use sSPL to flash another ROM). Maybe that will work?
Could it have something to do with DROPPING HIS PHONE instead of the sSPL?
Because the sSPL isn't flashed as I said many times before, it is in MEMORY, not flash..
new screen
i put the new screen in same white screen tested the screen in mda(pic inclosed) so nothing to do with screen
any more ideas
the screen is fine howcan i switch white screen off
to any one who can help
the more you know.....http://www.mdatweak.com/downloads/Wizard_Service_Manual.pdf
make hard reset and then
contecet with ubs and use the SPL again.
its happend to me and i did what i wrote and its worked....
I'm in the same boat! My Wizard is in the stuck white screem as well.
Zpyro said:
I'm in the same boat! My Wizard is in the stuck white screem as well.
Click to expand...
Click to collapse
could you give us more details?
-device (G3/G4)
-what you did (exactly) before you got this white screen.
It is a 8125 (G4) that is unlocked.
I created a ROM from one of the kitchens, and flashed it ... White Screen.
WOO HOO!!! GOT IT!!!
Steps to recovery:
1. Fully charge your phone (VIA Power Cord ... NOT USB)
2. Get the phone to bootloader (three color mode) - by soft resetting and holding the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Download your providers ROM (The "real" rom provided by Cingular/ATT). You can get the one for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
5. Stop ActiveSync (from Task Manager)
6. Run the program downloaded in step 4. This will reflash your phone with the ROM. This seems to be the ONLY WAY possible to reload a ROM from BootLoader.
Enjoy!
It says only ipl 2.25.0001 and spl 2.25.0001
I try a hard reset, but when it asks me to confirm by pressing SEND, I press SEND and nothing happens.. press any key and nothing happens, just sits there saying press SEND to confirm...
I tried flashing Cingular/AT&T's rom on to it, it was successful on the screen, but after rebooting, just went back into the 3 color screen...
Does anyone have any suggestions?
Additional info
I just wanted to add, I have searched threads here on xda-dev and other sites, and have found similar issues - normally the other issues have been resolved in one way or another involving a hard reset, which my phone will not complete. When it asks me to press send, the phone freezes at that point and does not accept any key entries (except reset). I would really appreciate any input. I also have a theory-that I may attempt this evening-If you hold the camera button down and reset, it brings up the boot loader screen (if my information is correct)... could my problem be caused by a faulty camera button? Maybe internally the button is remaining closed, which could prevent it from doing anything on a reset outside of the boot screen? Any engineers around that may know this? I am going to attempt (hopefully with low heat) to remove the button this evening... possibly even repair or replace it if the phone works with the button removed...(these thoughts are based on my phone being dropped in the sand at the beach...maybe a grain of sand worked it's way into the camera's button housing and is holding the contact closed)
problem's almost fixed
well thanks for no advice... i desoldered and removed the camera button (button 3). powered it on and the phone works. I reprogrammed the camera to button 5. (i also loaded a new WM6 rom and some other stuff) The last time I opened up the phone, I broke the itsy bitsy super micro tiny lock on the keyboard ribbon cable socket... so now my slide out keyboard doesn't work. I installed a full screen keyboard and set it to the messaging button (button 1) - the messaging button still brings up messaging with just a touch, but a long hold brings up a full screen touch keyboard that works fantastically!!! I am going to dismantle the very tiny micro switch and repair it, then resolder it back on the mainboard to make my camera work like it should again...and find a way to get the keyboard ribbon cable to lock into the socket...then my phone will be as good as new!
umm... thanks???
well congratulations on getting it working again.
tiny switch
I have taken the tiny little switch apart without breaking anything... one tiny grain of sand stuck under the button pressing on the switch plate... now i have to find a way to put the little switch back together... then attempt to solder it back onto the board without over heating nearby components. I have been playing around with Byka's cube... took a bit of tweaking to get it to work well.... not sure if I want to keep it or not... I have been trying to find htc cube, but no luck outside of a rom... which I may consider...but I just spent the past week reinstalling all of the software I use... Would like to just design my own windows for my phone if I had the time... Been working on an ion motor for an electric car...
I would like to thank everyone here at xda-dev. for all the information. Could not have learned so much, so quickly, if it weren't for this site.
oh... and I am using an 8125 (G4) with Faria Crossbow
Have the same problem...
Hi!
I have the same problem (but I don't have much tech know how).
It all started when phone got wet (inc. in battery compartment).
My phone would not soft reset beyond the Bootloader, unless I leave the battery out for a few hours. Then once it loads up, after a short amount of usage 2 things happen: 1) every time I would turn it on (or get a call) it starts in Camera (you didn't report it but you must have had the same experience). 2) the buttons don't work properly.
It finally dawned on me the camera button might be stuck, I set the button to "none", and no more more automatic camera. I still need to free the button altogether as still causing button freezeup and also allow soft resets.
I don't know much about soldering.
Any ideas?
Thanks
Hi, I both an HTC 8525 from eBay and it worked fine for first few days but yesterday a had first problem. At first his touch screen stopped reacting on touch, i tried rebooting, restoring on factory settings but every time he works for few minutes from the moment i start him and then again the same. My screen doesn't react on touch or if it reacts he opens a program and close it right away by it self, now he started doing that and when i start a program with buttons (not on touch screen). Please tell me is there a way to fix that by my self or should i return it? Please answer quick, thank you...
Factory default? Did it means hard reset? Had You done it? There are 2 ways :
1. Launch clear storage,
2. Handser OFF, press and hold right and left softkey, then do softreset with stylus..
If it still exist, i'm affraid of it's hardware problem, i hope not
hope anyone knows the answer!!
my phone (TMOUSA) is not unlocking after it goes on standby.
i had try 3 different ROMs and it still doing the same, task 29 on every flash,
one of them the 3.14 TMOUS stock ROM tried 2.15 and 2.14 radios and nothing
if i do a soft reset it will boot up ok and i can play with the phone an do calls and all but when it goes on standby and and try to unlock (seeing the actual unlock screen and slider) it do nothing, like the screen isn't working or unresponsive to touch
*battery pins ok
*powered phone without sim and without storage card but still doing the same thing
any ideas???
The same problem .. over and over with no solution :
http://forum.xda-developers.com/showthread.php?t=830562&highlight=Screen+Unresponsive
And
http://forum.xda-developers.com/showthread.php?t=822777&highlight=Screen+Unresponsive
kawazaki said:
The same problem .. over and over with no solution :
http://forum.xda-developers.com/showthread.php?t=830562&highlight=Screen+Unresponsive
And
http://forum.xda-developers.com/showthread.php?t=822777&highlight=Screen+Unresponsive
Click to expand...
Click to collapse
the firs link is the only one with the same problems im having, touch screen works but not after it goes on standby or if the phone go on standby by it self and i press any other bottom (not the end bottom) it will still works
everyone thinks is a hardware thing but how is the touch screen actually working for me? not like second link where the touch don't work at all
mine works but if i press the end key to make it go standby and press it again it become unresponsive, but if it goes to stand by by itself and i press any other key it will still works
well.... i guess we'll never know
probably my hd2 will go to the broken i might use it to fix any other thing drawer
Aaah.. FML
I just woke up, and ive got the same problem...
Can some1 help me where i can find the stock rom for vodaphone??
im gonna bring it back
hey everybody, i hope someone can help me, the thing is that my girlfriend have this phone right, and it came with android 2.0, i updated the phone to android 2.1 official and everything was normal, until a few days that it start to have problem with the touch screen. the problem is that sometimes she just put her finger close to the screen, she doesn't even touch it and the phone goes crazy and start to select things without touching the screen :S, another problem similar to that one, its that sometimes the screen freeze or something, you try to move betwen screens but it doesn't move propertly :S and an example is if you try to reset the phone (she have root and xrecovery) using the option that appears on the menu when press the power botton, you can press it, it doesn't do anything :S..so i change the rom for minicm7 (the last one that came out thins week) and apparently that problems is gone, the phone works fine, until today (i change it the rom yesterday) that the problem i mention before start to show up again :S, the only difference is that it doesn't happens so sudden as before, but we still want to know why than happens and how to fix it..please someone!
P.S: sorry for the speech xD
this is dev thread plz move it to q/a