Related
This merged English version of WM2003SE is compiled for the Australian model O2 XDA II.
NOTE: It is supplied as is. Use it at your own risk!!!
TIP: First backup your data and settings using either ActiveSync, SDBackup or XBackup - then download the attached ROM_Backup.zip - extract and follow the instructions in the ROM backup folder.
To install the merged WM2003SE:
1. Download the attached Setup.exe
2. Insert your O2 XDA II into it's USB cradle and confirm that a successful USB connection has been made with your PC
3. Run Setup.exe and follow the onscreen prompts.
Details:
The ROM image is version: 2.06.00WWE (ver 4.21.1088 build 14132)
The Radio image is version: 1.18.00
The Extended ROM image is a variance of version 2.06.100a (Sin.Merged.v2.0)
The Extended ROM contains the following:
Merge of ROM 2.02.t1WWE over ROM 2.06.00WWE, pre-configured with:
AltTab, AutoConfig, Blackberry, BT Icon, Caller ID, Camera, ClearType Landscape, ClearType Tuner, ClearVue, CMD, Connections, Contacts, Date, Device Manager, Explorer, ExtROM Tools, Flash, Fonts, IE Tools, IntelliDialer, ipConfig, Keyboard Extension, Midi Ringtone, MMS Composer, Notepad, O2, Paint, Print, RegEdit, Reset, Rotate Screen, Run, Running Programs, Scheduled Tasks, Tray Launch, Video MMS, WiFi & BT Headset/Handsfree.
The Autoconfig only contains support for the following Australian Carriers: - Optus, Telstra & Vodafone + "Not Listed - Set Manually"
KNOWN ISSUES:
A choice of either HandsFree or Headset profile is now enabled, please select only one or the other.
NOTE: HandsFree profile is not compatible with all headsets and may disable the headset mic. If this occurs, please re-pair and only choose Headset profile.
INFO: Original files were removed years ago due to forum upgrades, see various posts for alternative downloads.
Open Source
Now, let's pull it apart and see how it all works :lol:
It took quite a few steps to create an "all-in-one" package, however it's shortcoming is that once compiled, it's not easy to add your own cabs or customise your carrier details.
So by pulling it apart, it may allow the more savvy of you to re-create this package to your own requirements and perhaps we can learn a few new things along the way :wink:
The Base ROM & Radio
Step 1 ~ The Base ROM & Radio
The ROM image is version: 2.06.00WWE (ver 4.21.1088 build 14132)
The Radio image is version: 1.18.00
Here are the minimum files required to install the Base ROM & Radio onto your XDA II
NK.nbf (Base ROM Image)
Radio_.nbf (Radio Image)
HimaUpgradeUt.exe (Setup File)
HimaClearJumpCode.exe (System File)
Download and extract the contents of "WM2003SE_20600WWE.zip" into the same folder on your PC, Insert your XDA II into it's USB cradle (confirm that a successful USB connection has been made) and run HimaUpgradeUt.exe to start the installation.
:arrow: NOTE: The Operator Code is set to "O2" and the Language is set to "WWE" (Western World English). There are a few tools around to change these codes to suit other models, My personal choice is the attached version of EREdit: (no pre-selection of file type is required)
The Merge
Step 2 ~ The Merge
First, Why Merge?
We currently only have 3 versions of WM2003SE, each with it's shortcomings:
Version 2.20.xxCHS is in Chinese and although it's currently being translated into English, there's still a way to go!
So let's focus on the two remaining versions, both in English:
Version 2.02.t1WWE
Pro's: Stable with no hangs/delays on reboot, utilizes HandsFree Profile
Con's: Lacks ClearType implementation and Media Player 10
Version 2.06.00WWE
Pro's: ClearType implemented and Utilizes Headset Profile
Con's: Hangs/delays on reboot and no Media Player 10
The good news is that it's possible to obtain the "best of both worlds" by merging the two operating systems. By first flashing your ROM with 2.02.t1WWE and creating an ActiveSync backup, it's possible to then flash with 2.06.00WWE and restore from the backup.
The end result is surprising :shock: - ActiveSync merges the two operating systems! There are no delays/hangs on reboot and ClearType looks great. It's also possible to re-enable Handsfree Profile through a simple registry patch.
________________________________
Here's one I prepared earlier :wink:
No need to flash with 2.02.t1WWE, this backup is ready to restore over 2.06.00WWE!
Quite a few tweaks were made to it prior to backup:
Created "Start Menu" folders: Business, Communications, Games, Graphics, MultiMedia & System
Turned Off incoming IR Beam for GPS compatibility
Mapped Camera Button
Set Word Completion to 4 words after 1 letter (no caps or spaces)
Set Voice Recording to 44,100 Hz, 16 Bit, Stereo
Changed Phone Ring to Vibrate & Ring, set to Terrestrial & Keypad Tones
Turned on Screen Taps
Enabled Today "New Menu"
Turned on Microphone AGC
Set Screen & Power Off to 2mins
Removed merged BT Registry to allow choices later via patch
To restore this backup,
1. Flash your XDA II with 2.06.00WWE.
2. After installation, don't change any of the following default settings: time zone (GMT-8 Pacific US), device name (Pocket_PC) or regional settings (United States), instead setup an ActiveSync partnership (not Guest) and untick all items such as Calendar, Contacts etc... so no items will by Synced.
3. Restore by opening ActiveSync, then clicking "Tools=>Backup/Restore" - browse to the downloaded "Backup.zip" and extract the file "Backup.stg", select it with ActiveSync and then switch to the restore tab, finally clicking "Restore Now".
:!: Provided that the device name & regional settings match the above, ActiveSync restore will merge the 2 versions and prompt you to restart your O2 XDA II.
The Extended ROM
Step 3 ~ The Extended ROM
You now have a merged operating system but still need to add at least the basic functionality of MMS, Camera etc...
Each cab file below can be copied to your XDA II's memory/SD card and executed individually, however it would be far easier to bundle everything into the one installation routine.
As most of you know, your XDA II has a hidden partition called the Extended ROM, which (without tweaking) is limited to a capacity of 16MB.
Using an Extended Rom unlocking tool, it's possible to manually copy each cab file and associated system file into the Extended ROM using "File Explorer".
Start by downloading the attached "ExtRom_tools.cab" and copy to your XDA II's memory (Either via ActiveSync or SD Card if you have a Reader). Then execute it by browsing to it with "File Explorer", your Extended ROM will be revealed once you reboot after installation is complete.
You'll notice 4 new icons in your "System" folder. Run "ExtROM Unlock" to allow files to be written and removed.
The Cab Files
I've re-written each of these Cab files to customise their installation routines and ensure compatibility with WM2003SE.
If all are downloaded and placed into Extended ROM, they total 16MB :wink:
Each will place their shortcuts in the approprite category and where possible, settings are pre-configured.
:idea: Rather than running each one individually, copy each file into Extended ROM and wait untill "Step 4" to do the installation.
They're organized alphabetically and items marked with a *, should be considered essential parts of the Extended ROM.
:!: All are tagged as: "Customization Tools" for compatability with any internal cab file "Setup.dll's", If you can't wait till Step 4, don't panic if you run each one manually and are prompted by a "this application already exists" message (doesn't occur when executed by config.txt) - Simply ignore and continue each desired installation!
AltTab.cab
"AltTab.cab is a utility that can be mapped to any of your buttons, it allows you to switch conveniently between applications.
AutoConfig.cab
* "AutoConfig.cab" contains a utility called AutoConfig.exe that is essential for configuring your Carrier details.
This file is automatically copied to your Windows folder when the cab file is executed and a shortcut is placed into your "Start Menu->Communications" folder.
AutoConfig.txt
* "AutoConfig.txt" is essential when running AutoConfig.exe (Bundled in AutoConfig.cab). It contains a list of multiple Carriers for you to choose from.
It's an editable text file which should point to individual Carrier .cab .exe files located in your Extended ROM.
The AutoConfig.txt is copied to your windows folder when the files in your Extended ROM are executed by a Config.txt file.
AutoRun.exe
* "AutoRun.exe" is the first file to be executed after a "Hard Reset" and is an essential part of the Extended ROM.
It's sole purpose after a 3 second delay, is to execute in turn each command nominated in the "Config.txt" file.
Blackberry.cab
"Blackberry.cab" contains a utility which is found under "Settings" to configure the BlackBerry Service.
Version: 1.2.4.19
BT_Icon.cab
* "BT_Icon.cab" contains an essential file called "bt_profile.dll" which is copied to your Windows folder and replaces the Bluetooth Headset icon on your today screen.
The original Bluetooth Headset icon likes to play hide'n'seek because it's developers implemented a remote procedure call to constantly check for a non-existant storage space.
This new "bt_profile.dll" only checks upon device startup.
Caller_ID.cab
* "Caller_ID.cab" is an essential addition to your operating system. It's current implementation, version 1.20 (build 17957) allows the assignment of Photo's, Templates, Ringtones and Groups.
I've modified this installation to include the original splash screens upon an incoming call and also included the following renamed templates:
Cat, Carrots, Cola, Dancer, Disco, Heart, Soccer, Stars & Wheels
It's a 2 part program which provides Caller ID information and a GUI called "Photo Contacts" (found under "Start Menu->Business")
Camera.cab
* "Camera.cab" contains the essential interface required to utilize the XDA II's onboard camera and also provides a program called "Album" ("Start Menu->MultiMedia") which can handle a variety of file types including: .3gp .avi .bmp .gif .jpg .mid .mp4 .sdp .wav .wbm
This version 2.50 (build 15954) is compatible with WM2003SE's landscape mode however, the program's internal Orientation button should be used to switch the interface to landscape mode.
For more details about the program's internal mapped buttons, simply start the camera by clicking on the "Camera icon" placed into "Start Menu->MultiMedia" or use the pre-mapped button on the side of your XDA II, then click on "Tools->[ ?]"
ClearType_Landscape.cab
"ClearType_Landscape.cab" is a utility that places a file called "TwkCL.exe" into "Windows\Startup" to improve the appearence of ClearType fonts in Landscape mode.
ClearType_Tuner.cab
"ClearType_Tuner.cab" places a utility under "Settings" called "ClearType Tuner" which allows you to increase or decrease the effects of ClearType over your system fonts.
ClearVue.cab
"ClearVue.cab" contains 2 programs, "ClearVue PDF" & "ClearVue Presentation"(ver's 2.4.381a) which allow you to view .pdf & .ppt/.pps files.
I just called it's icons (under "Start Menu->Business") "Acrobat" and "PowerPoint" :lol:
CMD.cab
* "CMD.cab" is an essential utility that creates a command line interpreter (PocketConsole ver 1.3 over ReactOS ver 0.2) for WM2003SE. It's used later in the installation routine for executing Batch files.
You'll find a "DOS" icon under "Start menu->System" and "CMD Settings under "Settings".
Config.txt
* "Config.txt" is an essential file that is used in conjunction with AutoRun.exe to automate the installation, copying and execution of files.
It's an editable Text file and reflects the file names stored in your Extended ROM.
If you wish to modify the content of your Extended ROM, the Config.txt file should also be updated to reflect any changes in file names.
:!: Note that in this version, the AutoConfig.exe is deliberately not executed by the Config.txt file.
Connections.cab
"Connections.cab" contains a simple utility in the form of an "O2 icon" placed at the top of your start bar which monitors the status of active connections by changing it's color to Blue!
hiho,
i made an easy to use romcooking tool (i use it for moding my favorit roms )
its still alpha but if someone like to test it. ON YOUR OWN RISK !!!
because its written in C# and you can easyliy work with diffrent roms @ same time
just select an *nbf and this tool dumps it into a folder beside this file
i.e. no need for winhex(initflashfiles.dat) and default.rgu are save in the correct format automaticly
for simply add/remove files and/or regtweaks everthing is included
the scripts based on Molski's kitchen updated with bigstorage imagetools
the main app is the neokit.exe
have fun
inteks
you like it ? let me know ;-) --->>> DONATE
update version a087:
http://rapidshare.com/files/139239824/NeoKitSetup_A087RC4_.msi.html
PKGTool.exe isnt needed anymore "refreshPackageInfos" works much faster now
Setup is fixed , you dont need to uninstall old vers of NeoKit before installing the new one (after this version!!)
update version a084:
http://rapidshare.com/files/138975571/NeoKitSetup_A084RC3_.msi.html
some bugfixes. + skip extrom if empty + a small LNK file editor on doubleclick *.lnk
update version a083:
fixed a bug in neoflash (uc config)
goes back to framework 2.0 !!!
update version a081:
look @ http://forum.xda-developers.com/showthread.php?p=2474684#post2474684
update version a080:
the buid process is more automated now
the new build nbf file is copied together with RUU into "ROMDUMP\UpdateFiles"
G'Reloc is back
it has a setup now
a 'small' UC Config tool is included (path is fixed to \Storage Card\Cabs)
on the UC Config tab the files in "\Storage Card\Cabs" are listed (if you prophet is connected)
you can check which ones to install. sdconfig.txt is written directly to your storagecard.
you can also clear the autorun flag in registry and run checkautorun.exe directly to test your setup.
have fun
inteks
ps:
ist finally fixed that neokit can run from "long" pathnames. it can now run from i.e. "c:\program files\.... .....\neokit"
the setup will add the filetyp ".nbf" to registry. you can edit rom bei dubbleclick now ;-)
update version a070:
ok. beside some other fixes and optimations the most interesting new feature is the "comparer" button on the 'Files' tab!
you can select an other rom and neotab hides all files included in both roms!!!
in other words.
select a "reference" rom i.e. micro V3 as smallest but working rom and neokit hides all files that are "needed" !!!
you can edit/remove the files that are not really needed ;-)
update version a061:
Fileinfos(comments) are included in fulltextsearch now ;-)
update version a060:
1. i removed package import because it dont work as it should !! i dont dont why. . .
2. i fixed many bugs and put proper errorhandling in most functions.
update version a050:
biggest new feature is automated dumping and building of extension.rom
on the filestab you can select "remove" OR "moveto extRom"
if you move *.dll to extrom, then neokit ask you to include extRom in SystemPath! ;-)
update version a035:
added a treeview for packages
update version a034:
fixed a bug when option.xml is not unicode.
and i've added a ceipui.exe for WM6.1
if you remove this file you get an error messsage on boot. so i compiled a replacement that does absolutly nothing
update version a033:
added a fulltextsearch on the "files" tab ;-)
update version a032:
fixed some bugs when importing OEM Packs. pls copy the exefile into neokit folder.
update version a030:
add's OEM packeage import support
update version a021:
this is an hotfix only! pls replace the neokit.exe from version a020!!!
this version brings a big new feature ->
neokit creates a folder in its apppath called Fileinfo
on the filetab in the contextmenu you can "add comments" for everyfile
this comments saved as Filename+txt AND they are shown as tooltip AND they are on every dump you work on AND they are shareable !!!
I.E. -> if you know a file cant be removed because your neo dont boot without that file, add comment and share your comments here ;-)
update version a020:
new pic preview with thumbs
on the fly UPX compresion
removing with contextmenu now to prevent removing by mistake / removed items are red
screen -> http://m8z.de/screen.a020.PNG
update version a010:
ok. here is a new version with some really nize features ;-)
->winimage is included and there is a new button to edit extrom
->reshacker is included, on the fileTab in contextmenu you can open every file directly with reshacker !!!
if you edit resources with reshacker click "save" in reshacker then close reshacker.
neokit will "wait" till you exit reshacker and then it moves the *_original.* file to "ReshackerBackups" .
i also added "reversmode.exe" to edit the resources of "moduls" BUT NOT ALL DLL/EXE WORK AFTER CONVERSION MODUL->DLL->MODUL
if such a Modul not work try using the DLL file instead.
btw. its a multipart rar renamed to .zip
update version a006:
found and fixed this bug:
"Could not open input file '80040000-OS.nb'. Aborting."
it occurs on "long" filenames in path to nk.nbf. sorry for the circumstances
update version a005:
if you use an extendedRom you can put your tools into the extrom folder. on the initflashfiles tab click createstartmenuentry to create a linkfile to your tool
neokit reads the name of your "should be unlocked" extrom out of default.rgu ;-)
sample:
i put my neotab.exe in my extrom called "xFlash"
then neokit create a linkfile like 20#"\xFlash\neotab.exe" and an entry like Directory("\Windows\Start Menu\Programs"):-File("neotab","\Windows\neotab")
(you still have to build and translate the extension.nb for yourself !!!)
some bugfixes
update version a004:
runtimeerror on filestab fixed
http://forum.xda-developers.com/attachment.php?attachmentid=66063&d=1200406481
update version a003:
-"search" now search over default.rgu+user.rgu
-you can filter out packages in the filestab
-a new button to recreate packageinfos (if you copy the content of an OEM package to the dump dir)
-a contextmenu on filestab to edit i.e. bitmaps (it open the standart edit progy for that file)
http://forum.xda-developers.com/attachment.php?attachmentid=65915&d=1200321831
EDIT:
howto ->
1. select the *.nbf you like to work with
2. dump rom
3. if needed go to the default.rgu / user.rgu tab
3a. click create/load default.rgu
3b. make changes (if needed)
3c. click save
3d. if there are no errors !!!! click "copy to dump"
4. click load to load the initflashfiles.dat
4a. you can edit this file
4b. you can create lnk files from exe file in the dump dir
4c. you can create programs entrys automaticly like
i.e."Directory("\Windows\Start Menu"):-File("MediaPlayer.lnk","\Windows\PLAYER.lnk")"
4d click save (neokit removes the first 2 bytes no need for winhex)
5. removing files ->> neokit moves all selected file to the "removed" dir and move them back to dump if you deselect them ;-)
6. now click "build rom"
7. if there are no error click nb2nbf tool (create the nbf file in the neokit dir !!!)
7a. modelID -> Prophet
7b. outputfile should be -> ..\neokit\nk.nbf
7c. check File # 1: and browse to the newos.nb in the ROMDUMP dir
7d. Image Name -> select OS (Start address is filled automaticly)
7e. then click translate
8. click G3 or G4 !!! and then "start RUU" to flash the cooked rom . thats it.
your phone should allready hardSPL patched. !!!! ->>> http://forum.xda-developers.com/showthread.php?t=350033
you could make a manual please???
Thanks
Thanks! very good
I found out that you should use the tool from the root directory.
Otherwise you (eg I) get an errormessage.
ruipgouveia said:
you could make a manual please???
Thanks
Click to expand...
Click to collapse
this alpha version is in first for people that know what to do.
if you need help than read i.e the pdf that is included in Molski's kitchen.
but i will write some info text like on the "files" tab in next versions
skylow said:
I found out that you should use the tool from the root directory.
Otherwise you (eg I) get an errormessage.
Click to expand...
Click to collapse
yepp neokit expect all commandline tools in its own appdirectoy
how to use this tool, If I want to add some program, that from OEM?
varanusvincent said:
how to use this tool, If I want to add some program, that from OEM?
Click to expand...
Click to collapse
you can manually add file to the dump directory BUT
since bigstorage is possible it doesnt make sense to ADD files then to REMOVE files !!!
everything in ROM cant be deinstalled later !!!!!!
i for myself do the following -> i remove files, flash, if it doesnt work i put them back and try again ;-)
Okay this looks brilliant.
I've got as far as dumping a rom, building it.
When I come to the nb2nbf dialog box I get stuck. I have no idea what values to enter in the boxes! Please help, thanks.
I saved this from another thread, if this is what you need:
ModelID - PM300
Lang - WWE
OEM v. - any
operator v. - any
CID- clear
StartAddres - 80040000
ImageName - OS
littld said:
Okay this looks brilliant.
I've got as far as dumping a rom, building it.
When I come to the nb2nbf dialog box I get stuck. I have no idea what values to enter in the boxes! Please help, thanks.
Click to expand...
Click to collapse
pls have look @ this http://forum.xda-developers.com/showthread.php?t=350033 thread.
modelID -> Prophet
outputfile should be -> ..\neokit\nk.nbf
check File # 1: and browse to the newos.nb in the ROMDUMP dir
Image Name -> select OS
Start address is filled automaticly
then click translate
Thanks. If I don't include anything for the Extension rom, is that just wasted space on the device? Can I build a rom with no Extension?
littld said:
Thanks. If I don't include anything for the Extension rom, is that just wasted space on the device? Can I build a rom with no Extension?
Click to expand...
Click to collapse
in my own rom i unlocked & unhide the extended rom
and yes you can build a rom without extended rom, but the extended rom it cleared on flashing !!!
Great tool! Does it work on Wizard? If so, that'll be an easy of use ROM maker.
Thanks....
Com_Reg said:
Great tool! Does it work on Wizard? If so, that'll be an easy of use ROM maker.
Thanks....
Click to expand...
Click to collapse
i dont know i dont have a wizard.
I'm trying your tool, but Is possible to remove Windows Media Player?
humrod said:
I'm trying your tool, but Is possible to remove Windows Media Player?
Click to expand...
Click to collapse
i removed the wmplayer app in my rom, but i dont know for shure witch dll's needed for mp3 ringtones.
if you completly remove the package you loose mp3+wma ringtones.
i use korands 2.5 superclean as base rom and i removed sql mobile and wmplayer app and the kamera app (coolcamera works great and is only 52kb )
i am near 70mb on a G4 neo ;-)
i just want to make some minor adjustments in the korand 2.5 rom. it is already bigstorage.
is there anything i need to pay attention to?
and how can i modify/delete/add any registry key before i create the new rom?
cheers.
p. s.: found it.
Hi...
i tried to dump PDAViet Mysterious 1.0
replaced some png images (phone and comm manager)
generate default.hv and user.hv
build the os.nb (file size is smaller then original)
create the nk.nbf and include the dumped Extension.nb file (file size is smaller then original)
after flashing, my prophet hangs on boot screen...
Edit:
resolved on my own...
inteks said:
this alpha version is in first for people that know what to do.
if you need help than read i.e the pdf that is included in Molski's kitchen.
Click to expand...
Click to collapse
Thanks i cand find the pdf file man.
please send to me
ruipgouveia said:
Thanks i cand find the pdf file man.
please send to me
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=297027
or better here http://www.molski.biz/romcooking.html on his website ;-)
User To User Tips, Tricks ideas and issues thread.
XDA_UC is a silent User & Cook automation script.
It requires no user configuration (unless you count dripping stuff into a folder as configuring).
It differs opposed to the default Autorun & RunCC configuration that, as a user you do not need no make an SDConfig.txt file on your SD card.
And that you can start using your device immediately.
It will run in the background at the reboot the Cook has chosen to have it run.
But it adds a lot of extra tweaking functionality for hardcore Tweakers to.
What it basically does is install the beneath on the user side
My.tsk file from "\Storage Card\XDA_UC"
and if not present Cook.tsk from Windows Folder.
Copy Over User Files.
Check for "\Storage Card\XDA_UC\Copy2Root" if present, Disable Manila from Homescreen then Copy files from "\Storage Card\XDA_UC\Copy2Root" to the root of the device, Then checking for existence of wallpaper_TF3D.png or wallpaper_TF3D.jpg in "\Storage Card\XDA_UC\Copy2Root\Windows" and adding that to
[HKCU\Software\HTC\Manila]
"HomeBackgroundPath"="\\Windows\\wallpaper_TF3D.jpg"
Import registry files from "\Storage Card\XDA_UC\Copy2Root\Windows\manila.reg" If present
Re-enable Manila on Homescreen and redraw it. Now also works for the Sense 2.1 and up versions.
.xdas files in "\Storage Card\XDA_UC"
Silently run Legacy SDConfig.txt from Storage Card
(If your using RunCC.exe or Autorun you do not need to point to or use SDAutorun.exe or SDConfig.txt) Thanks to RoryB
Commands for SDConfig.txt can be found here....
.cab files in "\Storage Card\XDA_UC"
.cab files in "\Storage Card\XDA_UC\Storage", These cab files will be tempted to install to Storage Location.
.cab files in "\Storage Card\XDA_UC\Manual",These cab files will start with Full User interaction capabilities to choose where to install to.
.reg files in "\Storage Card\XDA_UC"
.xml files in "\Storage Card\XDA_UC"
.mscr files in "\Storage Card\XDA_UC"
.cer files in "\Storage Card\XDA_UC"
Create Shortcuts and more from Registry Keys
More information here....
Copy over welcomehead.192.01.png & welcomehead.192.02.png present in "\Storage Card\XDA_UC\Copy2Root\Windows" to the Windows folder.
Copy over welcomehead.96.01.png & welcomehead.96.02.png present in "\Storage Card\XDA_UC\Copy2Root\Windows" to the Windows folder.
Actually everything is copied over from Copy2Root folder to root, but the above Splashcreens get their file atributes removed before this happens.
Add native support for .mscr, .mortrun, .xda, xdai, xdas & .xdaz files
This thread is meant for user to user help and advice and sharing of tricks and tweaks.
Cooks should go to http://forum.xda-developers.com/showthread.php?p=3954547 for more information about the cooking side.
I have attached a Mort Script HTML Manual for those looking into learn about this type of scripting.
Before you consider buying me a beer. Please consider Donating to XDA to help out with the maintenance of the forum and get cool stars next to your Nickname showing your appreciation. Then there are always the people that without their apps this wouldn't have been possible at all that you can consider showing some love. Mort, DotFred & Sleuth255 All of whom made Apps Seemingly simple But oh so useful for the whole XDA and PocketPC community.
Hopefully A List of Cooked Roms with XDA_UC Pretty Soon.
Give me holler,
Or my main Homie Moderator Ameet.
Or you can ask your Favourite Cook to look into this and incorporate it into his or her rom
A Lot of Energy Rom's
www.energyrom.com
ELF/IN
AHEN E6f
ETEN Glofiish M700
ahmedfikry wm6.5 23089 light rom
Kaiser
jjblaster3
Raphael
Noonski's Secret Nightly Rom, Simpel Pro Classic (deuh)
Rhodium / Touch Pro 2
Juicy R0 @ PPCGeeks
Bikeandestroy Rom
DavidMMorley's v1.5.3 @ PPCGeeks
Bhar'S 21891_V2/23540_V2
*7ppc* for TP2
Rhodium / Touch Pro 2 CDMA
xpressyourcell's XpressDusk @PPCGeeks
xpressyourcell's XYC GTX @PPCGeeks
Samsung Omnia
Rock and Republic WM6.5 ROM @ XDA
Rock and Republic WM6.5 ROM @ PPCGeeks
Storm's ROM [CF03] @ Modaco
MrCapcom's i910 6.5 Custom Rom CF03 Edition
TechMaster7545 WM 6.5 CF03 Rom Build 23009 For I910
FloTanium ROM
Sony Xperia X1
WM6.5 для X1 Rumanian
Topaz
EPS Creme RC2 DE
RTT Topaz Peak, RTT Topaz Peak @ XDA,
Touch Dual
DJ Series
Touch Cruise 2 / Iolite
Serfer222's Iolite WM6.1 (build 21055)
Serfer222's Iolite, WM65, Russian, XDA_UC (Official Russian Mega ROM ported to Iolite)
Serfer222's Kitchen + Iolite WM6.1 (build 21055) WWE
HD / Blackstone
BiCh0n's ROM (french)
Touch HD2/Leo
Merlion NG Leo v1.30's Merlion NG Leo v1.30
RTT Shock Star RTM GER
BiCh0n's ROM (french)
Trinity/P3600
nAr & Icke WM6.5[WWE][FRA][DEU]
NoseDive's n083 P3600+i
Common Good Practices
Do Not Reboot untill The XDA UC Message tells you it's finished.
You do not need to make your .cab files read only. But out of safety of loosing them it is recommended.
Save your .reg files as Unicode, always start your .reg file with
Windows Registry Editor Version 5.00
In the first line. And leave one blank empty line at the end of the .reg file.
Test your tweaks and files instead of reflashing to many times. A self initiated script will be uploaded soon, so you can test on a device.
Save your .xml files as Unicode and check if they are correctly formatted by opening them for instance in Internet Explorer.
If it doesn't show you the content then it will tell you where to look for mistakes.
More XML tips
Commands for SDConfig.txt for Version 2.0
AutoShortcut Registry Tricks
AutoShortcut Registry Tricks
HTC Autoshortcut replacment and enhancements through registry keys:
Directory Copy
Copy over files from one folder to another, overwriting the present files.
This will also copy over any subfolders inside the folder being copied over.
The entry on the left is the destination folder, the entry on the right is the source folder.
See the example code below:
Code:
[HKEY_LOCAL_MACHINE\Software\XDA\DirCopy]
"\\My Documents\\Test"="\\Storage Card\\My Documents\\Test"
You can also use this registry entry if you just want to make an empty folder.
See the example code below:
Code:
[HKEY_LOCAL_MACHINE\Software\XDA\DirCopy]
"\\My Documents\\Test"="MakeDir"
FileCopy
Copy just one file over from one folder to another.
The entry on the left is the destination File, the entry on the right is the source file.
See the example code below:
Code:
[HKEY_LOCAL_MACHINE\Software\XDA\FileCopy]
"\\My Documents\\MakeDir.reg"="\\Storage Card\\XDA_UC\\MakeDir.reg"
Delete
Delete a file. This will not delete Files in cooked in Rom/Windows folder.
But it will for instance delete Read Only Pictures in My Documents
See the example code below:
Code:
[HKEY_LOCAL_MACHINE\Software\XDA\Write]
"\\Documents And Settings\\Somefile.xml"=""
Deleting of a whole directory has not been added as mistakes can be made to easily, resulting in a complete Device and SD card whipe.
If you understand the risks I reccomend to learn writing your own mortscripts to do this.
Write
Write more explicit shortcuts or files
The left entry is the destination file, the right entry is the text you want written into the destination file.
See the example codes below:
Code:
[HKEY_LOCAL_MACHINE\Software\XDA\Write]
"\\Windows\\Start Menu\\Programs\\Tools\\TF Detacher\\icon.lnk"="50#MPI_ProgramIcons.dll,-115"
[HKEY_LOCAL_MACHINE\Software\XDA\Write]
"\\My Documents\\Somefile.txt"="Hello World"
Auto Shortcut Creation
To create shortcuts to files or applications.
The left entry is the target link name, the right entry is the source file the link should be pointing to.
See the example code below:
Code:
[HKEY_LOCAL_MACHINE\Software\XDA\AutoShortCut]
"\\Windows\\Start Menu\\Programs\\SAP Settings.lnk"="\\Windows\\SAPSettings.exe"
If you want to be sure that the destination directory exists where you want the shortcut created you can add an extra Registry entry for Directory creation.
See the example code below:
Code:
[HKEY_LOCAL_MACHINE\Software\XDA\DirCopy]
"\\Windows\\Start Menu\\Programs\\Contacts"="MakeDir"
[HKEY_LOCAL_MACHINE\Software\XDA\AutoShortCut]
"\\Windows\\Start Menu\\Programs\\Contacts\\SAP Settings.lnk"="\\Windows\\SAPSettings.exe"
Run First Boot
Run a file or application at the first boot.
The left entry if for the file or application, the right entry is for paramaters you want passed to an application.
See the example code below:
Code:
[HKEY_LOCAL_MACHINE\Software\XDA\RunFirstBoot]
"\\Windows\\btdwake.exe"=""
SDConfig.txt Commands
Commands that will work in SDConfig.txt
Be aware that for commands with only three letters there needs to be a space between the : & \
XML: \Storage Card\Cabs\Personal.xml
XML: \Storage Card\Cabs\Personal.provxml
(To parse provisioning .xml or .provxml files Saved to ANSI)
REG: \Storage Card\Cabs\G-Alarm.reg
(To parse registry files in Windows Registry Editor Version 5.00 format)
CPY1:\Storage Card\Cabs\pim.vol
CPY2:\pim.vol
(To copy over one file, and if pim.vol is found in Cabs folder, Cprog.exe will be shut down first)
MOV1:\Storage Card\Folder
MOV2:\Windows\Folder
(Aplied to latest Beta's, but this will copy over folders and it's subfolders overwriting any existing files)
SC1: \Storage Card\Program Files\GoogleMaps\GoogleMaps.exe
SC2: \Windows\Start Menu\Programs\Google Maps.lnk
(Simple Shortcut creation)
WR1: \A File.txt
WR2: The Text That Goes Into the File
WR1: \Windows\Start Menu\Programs\Tools\Another App.lnk
WR2: 99#"\Windows\SuperApplication.exe"?AnotherAppWithIcons.exe,-IDI_APPICON
Yes for the Advanced Users. It removes Files Attributes from possible target file then deletes it before writing a new one.
Note that there needs to be a space before the written text starts! (Special NoPrize for the one that knows which file was originally under "AnotherAppWithIcons.exe")
CER: \Storage Card\Cabs\Work.cer
(Install certificates)
CAB: \Storage Card\Cabs\098MSN.CAB
(Cabs that can be installed silently without user intervention)
SCAB:\Storage Card\Cabs\098MSN.CAB
(Cabs that you want installed to Storage Card)
MCAB:\Storage Card\Cabs\098MSN.CAB
(Cabs that you want installed with full user interaction)
EXEC:\Storage Card\Cabs\something.exe
EXEC:\Storage Card\Cabs\mortscript.mscr
EXEC:\Storage Card\Cabs\Or A Link.lnk
EXEC:\Storage Card\Cabs\Or A Even a document.doc (consider this to be a regular Open or Run file as long as the file is known by system but that can be set be doing a .reg first with the file open registry settings)
KILL:AutoVer.exe
(to close running open apps, be aware there is no Slash needed)
DEL: \My Documents\Picture\leaf.jpg
(Remove read write permissions then try to remove the file, will of course not work on ROM/Windows files)
TSK: \My Cool Theme.tsk
Apply Theme
RESET
Will set the Reset flag to force reset at the end of XDA_UC
Questions & Answers
Question:: I am a new user of Windows Mobile and I don't understand many of the terms here, can you tell me in a simple language what exactly XDA_UC is doing for me or for my device?
Answer: XDA_UC aplies and installs installation files and user tweak files in a simple and straight forward manner that does not lock up your screen as the regular Autorun method's would with out the need to know how to configure a pre setup SDConfig.txt file. It runs in the background and you can start using the device after flash (thought you will be a little slower at start uas stuff is happening in the background)
Or if above is still not easy to understand, let's say like this: After you flashed a new ROM, or did a hard reset (or you run 'Clear Storage' from system settings page, it's same as so-called 'hard reset' here), all your programs and your tweaks or adjustment to the Operation System is wiped out and you only have a clean OS from the firmware on your phone. At this time, XDA_UC will silently install all your programs and apply all your tweaks alltogether in a straight-forward way, and you don't need to install or apply them one by one. Provided onlyif you already placed the (cab installer & registry tweak) files in the designated folder.
Question::I noticed the advantage of XDA_UC. But as a newbie to this society, seems I can not take full advantage of it. Any simple guidelines about what shall I learn and where to start?
Answer: The best way is to start learning which Registry settings you want personally always to be aplied to any rom. Look for CeRegEditor 4.3 so you can study, dump and compare the regitry to find the specific Registry keys that you can then save as .reg files. Installing cabs is nice and takes away a lot of hassle put adding your own. It's also smart to just make a shortcut to a specific program you already have installed on your SD as most work fine onze they have been installed before. That should save time on installing some cabs.
Question:: I have some Greenware in my storage card, every time after flashing a new ROM or a hard-reset, I need to make shortcuts for them inside \Windows\Start Menu\, Can XDA-UC do that for me?
Answer: You can either add a registry String line to any .reg file you put into the XDA_UC Folder
[HKEY_LOCAL_MACHINE\\Software\\XDA\\AutoShortCut]
"\\Windows\\Start Menu\\Programs\\Synchro Time.lnk"="\\Storage Card\\Program Files\\Synchro Time\\Synchro Time.exe"
And XDAUC will at the end of process convert all these registry settings to real shortcuts.
Or make a mortscript with the line:
CreateShortcut(SystemPath("ProgramsMenu") \ "Synchro Time.lnk","\Windows\Synchro Time.exe")
Question: What if I want to run XDA-UC by myself? Is it possible? Since what time to run (on first boot. second boot, or which boot after hard-reset) is decided by the cook of my ROM.
Answer: A Script will be provided soon for this, but it won't install if files that have already been installed at the XDA_UC run at the first boot.
Almost everything that get's installed by XDA_UC is written to the registry so if someone has the time to develop a managing tool can read this values.
Coming soon...
Is this something that can be installed/added to an existing rom that I can use stand alone, or does it have to be cooked into a rom? Thanks.
In principle this is supposed to be a cooked in thing, but Once i have tested the V 1.0.02 fully, and tweaked the timing a bit i might make a trimmed down "Run Whenever you like version or add to a SDAutorun Only Rom"
But it the adding to SDConfig.txt will need some testing, that if no one else is doing i will need to test first someday.
Noonski said:
In principle this is supposed to be a cooked in thing, but Once i have tested the V 1.0.02 fully, and tweaked the timing a bit i might make a trimmed down "Run Whenever you like version or add to a SDAutorun Only Rom"
Click to expand...
Click to collapse
OK, thanks for the reply. I will keep monitoring this thread to see how you're doing. I'm thinking this is a good way to update after a flash, but I'm not sure if I want to change roms right now. Also, not too many roms have it cooked in just yet.
Is this to install to main memory only?
If not, how do we differentiate which cabs we want in main memory and which in storage card?
I'm testing the next version which will recognize the Cab's in an extra Folder "SD" inside of XDA_UC.
Cab's placed there will open with full user interaction, so you can choose the location of where to install.
And it already has a silent, and at least 40% more effective method then a cabfile, of installing whatever to where ever you want.
I will also in time, unless someone beats me to the punch, an example .xdas file, to which you can add, your own .xml, .reg, files & folders and an silent.mscr to.
You can add a lot to that, and do whatever you want, if your willing to say goodbey to cabs that is.
Noonski said:
I'm testing the next version which will recognize the Cab's in an extra Folder "SD" inside of XDA_UC.
Cab's placed there will open with full user interaction, so you can choose the location of where to install.
And it already has a silent, and at least 40% more effective method then a cabfile, of installing whatever to where ever you want.
Click to expand...
Click to collapse
What happens if your cab is NOT successfully installed? Is there an error trap of some sort or does the program just stop or crash?
Noonski said:
I'm testing the next version which will recognize the Cab's in an extra Folder "SD" inside of XDA_UC.
Cab's placed there will open with full user interaction, so you can choose the location of where to install.
And it already has a silent, and at least 40% more effective method then a cabfile, of installing whatever to where ever you want.
I will also in time, unless someone beats me to the punch, an example .xdas file, to which you can add, your own .xml, .reg, files & folders and an silent.mscr to.
You can add a lot to that, and do whatever you want, if your willing to say goodbey to cabs that is.
Click to expand...
Click to collapse
Yes we need a really functional, powerful and flexible XDA_UC. But it may be a challege to balance this:
For advanced users -> They can do whatever they want to do with the UC, and it's wonderful.
For common users -> They can use the basic functions of it without complex learning process, and later on they just will find more and more supprise out of it.
For this purppose maybe a readme file somewhere is also good additive.
dmcnado said:
What happens if your cab is NOT successfully installed? Is there an error trap of some sort or does the program just stop or crash?
Click to expand...
Click to collapse
Good Question, I'm going to fing a cab that doesn't want to install first
But it should not install and there is no error trap besides that the cab will not show up on the installed programs in the control panel.
After that it contiunues.
wg5566 said:
Yes we need a really functional, powerful and flexible XDA_UC. But it may be a challege to balance this:
For advanced users -> They can do whatever they want to do with the UC, and it's wonderful.
For common users -> They can use the basic functions of it without complex learning process, and later on they just will find more and more supprise out of it.
For this purppose maybe a readme file somewhere is also good additive.
Click to expand...
Click to collapse
That is the intention. With a growing amount of users not that into tweaking, i feel the urge to draw them in and start learning and then contributing.
Noonski said:
That is the intention. With a growing amount of users not that into tweaking, i feel the urge to draw them in and start learning and then contributing.
Click to expand...
Click to collapse
Vow, wondering what if M$ heard of this. Some big guy is inspirating everybody to hack their OS!
Joking. Thanks for everybody' efforts to push forward the development of WM system. I am one of those that inspired by this sociaty and just joined the team.
But basically I still keep the business way of thinking about some great apps or better methods. That is, some details and some promotion (marketing term) is always needed before it get reachable to every user and widely spreaded. I think I can contribute more on this aspect.
Edit: I added two more questions on post#4. Anybody can answer please answer.
Did my best to answer these.
And i updated the info in post 1 to reflect the updates in V 1.0.02
I added something to your answer, but still not feel satisfied. Please just keep editing it. What we need is just like an explanation you made on the Rapheal ROM thread.
Another thing is the title of these two thread (sorry I keep commenting on these off-topic issues):
[UC]XDA_UC V1.0.02, Automated & Silent User & Cook, Configuration Service[12/07/09]
&
[UC]XDA_UC Autoconfiguration User To User Thread[23-06-2009]
Maybe I'm a little slow, but I takes me more than 5 seconds to (not completely) figure it out what is this talking about after first glance at the title, and then decide to take a look inside.
And then look at another big guy Menneisyys's thread title:
Sticky: Another revolutionary utility by me: add "find in page" support to most web browsers!
It is completely different effect on grasp reader's notices. And that makes difference on spreading speed.
Just comment, no matter is you insist to keep Noonski style.
wg5566 said:
Another thing is the title of these two thread (sorry I keep commenting on these off-topic issues):
[UC]XDA_UC V1.0.02, Automated & Silent User & Cook, Configuration Service[12/07/09]
&
[UC]XDA_UC Autoconfiguration User To User Thread[23-06-2009]
Maybe I'm a little slow, but I takes me more than 5 seconds to (not completely) figure it out what is this talking about after first glance at the title, and then decide to take a look inside.
And then look at another big guy Menneisyys's thread title:
Sticky: Another revolutionary utility by me: add "find in page" support to most web browsers!
It is completely different effect on grasp reader's notices. And that makes difference on spreading speed.
Just comment, no matter is you insist to keep Noonski style.
Click to expand...
Click to collapse
Is that really important? In my opinion the answer is no.
Noonski! Thank you for your Great work on this, i have included this in my rom and with Blazing Wolfs help got it up and running with no issues, except one.
Whenever i set XDA_UC to start of first initial flash it kills my modem i have to manuly pick the network the my phone uses to connect to the internet. IF i make XDA_UC start after a reboot it works perfect, I have tried to look at all The MSRC files and cant see to put my finger on the issue!!! Thanks in advance!!!
[XDA_UC][UC][SASHIMI][S4X] S4X_Auto & S4X_Backup [DEC.02.2010] XDA_UC Mods & Answers
* * * << PLEASE CHECK THE UPDATES/NOTES TOWARDS THE BOTTOM OF THIS POST >> * * *
Click to expand...
Click to collapse
If you need to know about Energy's version of XDA_UC, or are not familiar with it, but use his ROMs please CLICK HERE NOW!!!
Click to expand...
Click to collapse
I have done some extensive modding of the MortScript from SASHIMI (by bengilah @ www.winmo-experts.com) and XDA_UC (by Noonski here @XDA) and have come up with a couple additions meant mainly for Energy's custom XDA_UC as it lacks some of the features that Noonski's version does, well now you can have ALL THAT & MORE!
What does S4X_AutoLauncher.mscr do?
01. it loads the S4X_Auto Script (S4X_Auto_*version*.mscr) with an updated version of MortScript.exe (4.3b15) and waits for it to finish (this way you don't have to install new version of mortscript for the mod to work!).
S4X_Auto script does the following, in the following order:
01. shuts down sense, kills manila.exe and any processes found in the "autoKillApps" section of the autoSettings.ini.
02. deletes AppData folder from device, if instructed by autoSettings.ini to do so.
03. installs CERT files found in XDA_UC_\_Mod_\filesCERT (+ subfolders)
04. provisions any XML files that have "email" or "wifi" in the name of the file.
05. silently sets windows them from the autoSettings.ini, place the filename.tsk(only - spaces are OK, but NO path) of the theme in the INI like this:
Code:
[AutoSettings]
theme=filename.tsk
if it is a theme that is not present on the rom you can place the file in the folder XDA_UC\_Mod_\filesTSK, and it will get copied to windows before being set as the default theme. if no theme is set in the autoSettings.ini, then any TSK files present in XDA_UC\_Mod_\filesTSK will be copied to windows, then a dynamic menu with all available themes will be shown, and you can choose one, if none is chosen (10sec timeout), then the default cooked theme will be left as the default.
06. installs CABs, located in root of XDA_UC\_Mod_\filesCAB, silently to device
07. installs CABs, located in root of XDA_UC\_Mod_\filesCAB or any subfolder thereof (EXCEPT FOR \netCF, \Dialer, \SDAuto or \SKIP), silently to device.
08. if a SASHIMI ".auto" file is present, it will install the cab semi-silently (no user interaction required), to device or storage card (see XDA_UC\_Mod_\_bin\INI\sample-file.auto for example)
09. install a custom dialer if there are CABs present in XDA_UC\_Mod_\filesCAB\Dialer (+ subfolders), shuts down the proper processes first and if that isn't possible it will skip installation so that there are no errors.
10. installs netCF CABs silently to device if present in XDA_UC\_Mod_\filesCAB\netCF (+ subfolders) (uses THIS method. )
11. looks for CABs in folder: XDA_UC\_Mod_\filesCAB\SDAuto(+ subfolders), installs them silently to your SD. The cabs don't HAVE to be UC compatible, but you will have to do some manual things if they aren't UC compatible... NOTE: not all CABs work with this method, if they don't work, please place them in folder: XDA_UC\_Mod_\filesCAB\Manual, for full user interaction when necessary. This is no longer a separate script, I have integrated it. credit to bengilah @ winmo-experts.com
12. SKIPS all CABs located in XDA_UC\_Mod_\filesCAB\SKIP (+ subfolders)
13. installs *.XDA, *.XDAI, *.XDAS & *.XDAZ files found in XDA_UC\_Mod_\filesXDA (subfolders as well)
14. imports all reg files found in XDA_UC\_Mod_\filesREG (+ subfolders)
15. provisions XML files found in XDA_UC\_Mod_\filesXML (+ subfolders)
16. executes EXE files found in XDA_UC\_Mod_\filesEXE (+ subfolders), if a parameter(s) is found in exeparams.ini, then it is run with those parameters
17. looks for *.wgt/*.widget files in folder: XDA_UC\_Mod_\filesWGT, and installs them with wmwidgetInstaller.exe (if present in ROM) automatically (not silent, but usually no user input is required).
18. looks for folders under folder: XDA_UC\_Mod_\filesSense\****, and copies the content of each folder to \Windows, this is useful for keeping your fixes/mods seperated so that when a new rom comes out that includes the fix/mod you can just delete that folder and it won't be copied to device anymore during XDA_UC setup =)
19. copies all files/folders from folder: XDA_UC\_Mod_\filesRoot, to the root of the device IE: XDA_UC\_Mod_\filesRoot\My Documents gets copied to \My Documents...etc...
20. if present, executes deleteOps.ini and deletes files and/or folders, see the XDA_UC\_Mod_\_bin\INI folder for sample .ini's
21. if present *.pib file in XDA_UC\_Mod_\filesPIM, starts PIMBackup and waits until user is finished importing settings, then...
22. looks for PIM.VOL in folder: XDA_UC\_Mod_\filesPIM, renames current, copies backup, then places a self actuating and deleting script in \Windows\Startup that will delete the old renamed PIM.VOL file at the next boot.
23. runs any MSCR (MortScripts) found in XDA_UC\_Mod_\filesMSCR (+ subfolders), if parameters exist in scriptparams.ini, then it runs the script with the given parameters.
24. imports CHT settings file, if present in folder: XDA_UC\_Mod_\filesCHT
25. finally, I have added logging (no matter whether script is ran manually or automatically by XDA_UC) and on-screen notifications (only during initial XDA_UC setup), the log file can be found in folder: XDA_UC\_Mod_\_bin\LOG\S4X_Auto_ver#_LOG.txt
XX. For ALL CAB & Widget file installs, looks for an entry in customlinks.ini, if present moves the link to the specified directory in the start menu after installation is complete
Click to expand...
Click to collapse
What does S4X_SDAutoLauncher.mscr do?
01. It loads the sdauto script with an updated version of MortScript.exe (4.3b15) and waits for it to finish (this way you don't have to install new version of mortscript for it to work!).
S4X_SDAuto_1.0.mscr script does the following, in the following order:
01. files are installed alphanumerically: 0, 1, a, A
02. supports SASHIMI ".auto" files, to automate installation of non UC compliant CABs (ie: pop up messages/windows during installation)
03. it writes a log to XDA_UC\_Mod_\_bin\LOG\S4X_SDAuto_1.0_LOG.txt
Click to expand...
Click to collapse
What does S4X_Backup do?
I DID NOT WRITE (MOST OF) THIS CODE, I ONLY MODDED IT TO MAKE IT WORK THE WAY I WANTED/NEEDED IT TO!!!!
01. * Full minus file > customRegXport, PIMBackup & CHTBackup
02. * FullBackupXport > Filebackup.ini, Regexport.ini, PIMBackup & CHTBackup
03. * CustomRegXport > run regexport.ini ONLY
04. * PIMBackup > Backs up PIM data with PIMBackup, if a file already exists in XDA_UC\_Mod_\filesPIM folder, it copies the file(s) to folder: XDA_UC\_Mod_\_Manual\filesPIM
05. * CHTBackup > Backs up Co0kie Home Tab data and saves it as "chtsettings.cht" in folder: XDA_UC\_Mod_\filesCHT
06. * filebackup > runs filebackup.ini ONLY
07. * Full Export > full registry exported saved in folder: XDA_UC\_Mod_\_Manual\filesREG
08. * View Regexport.ini > Shows you the contents of regexport.ini
09. * View Filebackup.ini > Shows you the contents of filebackup.ini
10. * _ E X I T _ * > self explanatory ;-)
11. when doing a REG export I added a check of fileSkipOverOrArchive in autoSettings.ini (found in XDA_UC\_Mod_\_bin\INI), 0 = ARCHIVE, 1 = OVERWRITE, 2 = SKIP), if set to ARCHIVE a subfolder is created in XDA_UC\_Mod_\_Manual\filesREG and the files present in XDA_UC\_Mod_\filesREG are moved there before export starts. this way you have a backup of previous reg settings.
Please see post #3 for examples of filebackup.ini and regexport.ini
Click to expand...
Click to collapse
XDA_UC RELATED LINKS:
'Energy' ROM/XDA_UC - User to user tips and tricks!
[UC]XDA_UC Autoconfiguration User2User Thread[23-06-2009]
[UC]XDA_UC V2.RC1, Automated & Silent User & Cook, Configuration Service[14/05/10]
[APP][2010/07/07] XDA_UC_NET - new PORTABLE version of User Customization. (v0.6)
MORTSCRIPT RELATED LINKS:
MortScript Examples Accumulation
[MortScript] Source Compendium
SASHIMI RELATED LINKS:
[UC] User Customization Backup for Touch Pro using Sashimi
[07/08/2008] Sashimi Tips & Tricks
[REF] How-To: automate backup (inc. Manila conf) before a ROM upgrade using SASHIMI
SASHIMI and new 6.5.x roms
Click to expand...
Click to collapse
In an attempt to keep THIS post clean, I am not going to post the code from these two scripts. I will attach my XDA_UC_Mod [latest], which contains both of these scripts which you can extract from the zip and look at all you want.
I am going to post the contents of my filebackup.ini and regexport.ini's for reference, for you non-SASHIMI converts or SASHIMI users who never took the time to learn that wonderful part of SASHIMI. See posts #2 (autoSettings.ini) and #3 (filebackup.ini, regexport.ini, example ini's) for that info...
Future Plans:
1. a way to automate PIMBackup restore w/an .ini
2. completely modularize the mod and allow an .ini to set/determine what actions are performed, hopefully to make process slightly quicker as only script code needed will be loaded/executed
03. regKeyDelete.ini - to automatically delete some keys from registry [ie: bootloader and init entries...etc...] will be written much like the regexport.ini from sashimi
Instructions
If you only want functionality to install cabs to SDCard silently, then just download the S4X_SDAuto_Mod and extract the zip to the ROOT of XDA_UC folder, otherwise if you want the full mod download the S4X_Auto_plus_Backup_Mod and extract it to the ROOT of XDA_UC folder, there is no need for both as the S4X_SDAuto_Mod is included in the full mod.
1. choose file and unzip to ROOT of XDA_UC folder
2. if running EITHER mod manually, run the .mscr file in root of XDA_UC or .exe in the _bin folder, do NOT run the .mscr file in the XDA_UC\_Mod_\_bin folder unless you have a 4.3b11+ version of MortScript already installed on your system
3. to use S4X_Backup run S4X_Backup.exe in the XDA_UC\_Mod_\_bin folder of XDA_UC or from the start menu > tools > S4X_Backup (only present if you've used xda_uc setup with my mod)
--------------------------------------------
S4X_Auto & Backup Mod [Latest] - mediafire mirror
S4X_SDAuto Mod[Latest] - mediafire mirror
--------------------------------------------
EDIT 12/27/2010 ATTENTION: As I am currently unable to keep up with the updates at the moment, XDA user powinmo, is providing some code updates at THIS POST, please download the full package, then download his code update if you are a first time user. Otherwise you can just download his update, to fix the current issues. Changelog for his update is HERE.
Click to expand...
Click to collapse
autoSettings.ini
Here are some basic explanations of what the settings in autoSettings.ini do. =)
Code:
[AutoSettings]
[b][color="red"]If for some odd reason device shuts off, reboots...etc during setup/customization, if this is ON (1), it will retry the last task, if OFF (0) it will continue after the last attempted task.[/color][/b]
aggresiveResume=1
[b][color="red"]If set to ON (1), will automatically remove appData folder from device[/color][/b]
appDataDelete=1
[b][color="red"]this relates to the S4X_Backup mod, if set to 0 it will "ARCHIVE" (copy to _Mod_\_Manual\filesREG\ARCHIVE_[date]) any existing REG files before exporting the new ones to _Mod_\filesREG[/color][/b]
fileSkipOverOrArchive=0
[b][color="red"]if ON (1) will display the fullpath in status updates[/color][/b]
FullPathStatus=0
[b][color="red"]If set to 0, will use mortscript built-in process kill function first (default is 0), if set to 1, will use SKTools.exe #KILLPROC command line function first to try to kill the process. I highly recommend keeping it on 0, but if you have trouble with apps not getting killed (IE: for dialer cab install, PIMBackup restore...etc) then try changing this.[/color][/b]
killApp=0
[b][color="red"]If ON (1), will automatically reboot device after AutoSetup/Customization is complete[/color][/b]
RebootAfterAuto=0
[b][color="red"]if ON (1), the autoProgressFile will be deleted after setup/customization is complete, maybe good for debugging, so you can look at file if there are issues[/color][/b]
resetAutoFlag=0
[b][color="red"]when copying files, or deleting them, if ON (1) will remove all file attributes and set only "ARCHIVE" attrib[/color][/b]
ResetReadOnly=1
[b][color="red"]will set a reg entry, if the script is run via the "AUTORUN" feature, ie: using the 2577 folder found under _Mod_\_bin[/color][/b]
SetAutoRunFlag=1
[b][color="red"]If ON (1), will keep open a status message window, that will update with each completed/skipped/failed task... everything is always logged to _Mod_\_bin\LOG\*LOG.txt, so not necessary for debugging, only if you want visual confirmation while you watch it work...[/color][/b]
statusOn=1
[b][color="red"]this pertains to the TSKfiles portion of the script, you can use the filename of any theme located in \Windows or _Mod_\filesTSK, it will automatically be set during setup/customization[/color][/b]
theme=EnergyROM 2010.tsk
[b][color="red"]If ON (1) will use FdcSoft TskMgr.exe (located in _Mod_\_bin) to import REG files, default (0) will use SKTools.exe (also located in _bin folder)[/color][/b]
UseTaskMgrRegImport=0
[b][color="red"]below is a list of apps/processes that the script will attempt to kill during the "disable htc sense GUI" portion of the script. you can add any app/process you like, but be careful and only use the process name and extension, do not include the path[/color][/b]
[autoKillApps]
app01=manila.exe
app02=AudioManager_eng.exe
app03=AlbumSearcher.exe
app04=changescreen.exe
app05=gyrator2.exe
app06=quickmenu.exe
app07=repllog.exe
app08=sipgt_app.exe
app09=tmail.exe
filebackup.ini
- anything set to "Auto" will backup to _Mod_\filesRoot
- anything set to "Manual" will backup to _Mod_\_Manual\filesRoot
- so that it doesn't actually get copied to your device during the
- copy2root part of my script, you must do it manually.
Code:
[Appz_Config]
FileBackupDirMode=Auto
ArkSwitch=\Program Files\Arkswitch\Theme\config.xml
changeScreen=\Windows\changeScreen.config
ET9_1=\Windows\ET9*.Cdb
ET9_2=\Windows\ET9*.Rdb
Lumos=\Program Files\Lumos\settings.txt
[Gen_Filez_Backup]
FileBackupDirMode=Auto
ShakeSave=\ShakeAndSave\*.*
[Opera_9]
FileBackupDirMode=Auto
Bookmarks1=\Windows\Opera9\opera6.adr
Bookmarks2=\Windows\Opera9\Profile\opera6.adr
Cookies1=\Windows\Opera9\cookies4.dat
Cookies2=\Windows\Opera9\Profile\cookies4.dat
Secure=\Windows\Opera9\secure\wand.dat
Settings=\Windows\Opera9\opera.ini
Skin=\Windows\Opera9\Skin\*.*
[Opera_10]
FileBackupDirMode=Manual
cookies=\Program Files\Opera Mobile 10\profile\cookies4.dat
pass=\Program Files\Opera Mobile 10\profile\secure\wand.dat
prof1=\Program Files\Opera Mobile 10\profile\datastorage\*.*,*
prof2=\Program Files\Opera Mobile 10\profile\op*.dat
prof3=\Program Files\Opera Mobile 10\profile\*.ini
[Sounds]
FileBackupDirMode=Manual
MP31=\Windows\*.mp3
WAV1=\Windows\*.wav
WMA3=\Windows\*.wma
MP32=\Windows\Rings\*.mp3
WAV2=\Windows\Rings\*.wav
WMA3=\Windows\Rings\*.wma
[AppData_StartMenu_StartUp]
FileBackupDirMode=Manual
htcAudMgr=\Application Data\HTC\AudioManager_Eng\*.*,*
htcDownMgr=\Application Data\HTC\DownloadManager\*.*,*
htcStocks=\Application Data\HTC\ygo\*.*,*
htcTwitter=\Application Data\HTC\Twitter\*.*,*
StartMenu=\Windows\Start Menu\Programs\*.*,*
StartUp=\Windows\StartUp\*.*
Themes=\Windows\*.tsk
regexport.ini
- anything set to "Auto" gets saved to _Mod_\filesREG
- anything set to "Manual" gets saved to _Mod_\_Manual\filesREG
NOW SUPPORTS (as of version 1.1) 6Fg8's customRegExport Mod, see below for explanation and HEED THE WARNING!!!
6Fg8 said:
The mod allows additional parameters in REGEXPORT.INI:
Code:
[COLOR=Blue]key1=<yourkeypath1>
key2=<yourkeypath2>,<value1>,<value2>,<value3>, ... ,<valueN>
key3=<yourkeypath3>,*[/COLOR]
key1 is the traditional way of exporting registry keys as its already implemented. It exports this key including all values/subkeys.
key2 specifies a key, plus the value names you want to export (value1-valueN). Value names are CASE SENSITIVE (!), if they dont match you end up with an empty key.
key3 specifies a key, plus ALL values, but WITHOUT subkeys.
WARNING: DO NOT mix filtered (like in key2, key3 examples) and unfiltered keys (key1) in the same section, as this will lead to missing values. If you need to do this, split them into separate sections.
examples from my own usage:
Code:
[COLOR=Purple][B][Opera vibration][/B][/COLOR]
[COLOR=Blue]RegExportDirMode=Auto
key1=HKEY_LOCAL_MACHINE\Software\Opera\Defaults,VibrationEnabled
[/COLOR]
[COLOR=Purple][B][power+backlight settings][/B][/COLOR]
[COLOR=Blue]RegExportDirMode=Auto
key1=HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts,BattSuspendTimeout,BattSuspendTimeoutSave,ACSuspendTimeout,ACSuspendTimeoutSave
key2=HKEY_CURRENT_USER\ControlPanel\BackLight,BatteryTimeout,BatteryTimeoutUnchecked,ACTimeoutUnchecked
[/COLOR]
Click to expand...
Click to collapse
Code:
[1000_MySettings]
RegExportDirMode=Auto
Attachments=HKLM\System\Inbox\Settings\AttachPath
AudioGateway=HKLM\Software\Microsoft\Bluetooth\AudioGateway
Backlight=HKCU\ControlPanel\Backlight
BLTimeouts=HKLM\System\CurrentControlSet\Control\Power\Timeouts
Clock=HKLM\Software\Microsoft\Clock
JPG1=HKCR\.jpg
Notifications=HKCU\ControlPanel\Notifications
Phone=HKCU\ControlPanel\Notifications\Phone
PhVol=HKCU\ControlPanel\PhoneVolume
PictureLoc=HKLM\System\Pictures\Camera\OEM\PictureLocation
SavLocAud=HKCR\SystemFileAssociations\audio\shell\save\Save Location
SavLocIE=HKCU\Software\Microsoft\Internet Explorer\Main\Default storage location
SavLocImg=HKCR\SystemFileAssociations\image\shell\save\Save Location
SavLocVid=HKCR\SystemFileAssociations\video\shell\save\Save Location
SoundCategories=HKCU\ControlPanel\SoundCategories
Sounds=HKCU\ControlPanel\Sounds
TCPWindowsSize=HKLM\Comm\tcpip\Parms
Volume=HKCU\ControlPanel\Volume
Wallpaper=HKCU\ControlPanel\Desktop
WMV1=HKCR\.wmv
[1001_TarkimSettings]
RegExportDirMode=Auto
KeyConfig=HKLM\Software\KeyboardConfig
[1002_HTCSoftwareHKCU]
RegExportDirMode=Auto
Camera=HKCU\Software\HTC\Camera
DownloadMgr=HKCU\Software\HTC\DownloadManager
Manila=HKCU\Software\HTC\Manila
People=HKCU\Software\HTC\People
TaskManager=HKCU\Software\HTC\TaskManager
[1003_HTCSoftwareHKLM]
RegExportDirMode=Auto
AudioBooster=HKLM\Software\HTC\AudioBooster
AudioManager=HKLM\Software\HTC\AudioManager_Eng
Camera=HKLM\Software\HTC\Camera
Config=HKLM\Software\HTC\Manila\Configuration
Facebook=HKLM\Software\HTC\FacebookSDK
InternetPush=HKLM\\Software\HTC\Manila\InternetPush
PhoneExtended=HKLM\Software\HTC\PHONE\PhoneExtendSetting
SlidingSound=HKLM\Software\HTC\SlidingSound
StartUpAnimation=HKLM\Software\HTC\HTCAnimation
Twitter=HKCU\Software\HTC\TwitterApp
YouTube=HKLM\Software\HTC\YouTube
[1004_Co0kie]
RegExportDirMode=Auto
Co0kie=HKLM\Software\HTC\Manila\Co0kie
Home=HKLM\Software\HTC\Manila\Home
Tasks=HKLM\Software\HTC\Manila\Tasks
[1005_HTCAccountMgr]
RegExportDirMode=Manual
AccountManager=HKLM\Software\HTC\HTCAccountManager
[1006_StartMenuIcons]
RegExportDirMode=Auto
StartMenuIcons=HKLM\Security\Shell\StartInfo\Start
[1007_MySoftwareHKCU]
RegExportDirMode=Auto
7zip=HKCU\Software\7-zip
ArkSwitch=HKCU\Software\ARKconcepts
DualBoot=HKCU\Software\Gen.Y
Changescreen=HKCU\Software\idevelopstuff\changescreen
FacebookApp=HKCU\Software\Microsoft\Facebook
Modaco=HKCU\Software\Modaco
Mort=HKCU\Software\Mort
Mosko=HKCU\Software\mosko.mobi
neuLight=HKCU\Software\Wei Enterprise
Palringo=HKCU\Software\Parlingo
PIMBackup=HKCU\Software\FdcSoft
QuickMenu=HKCU\Software\AlenSoft
RSS=HKCU\Software\Ilium Software
SIPChange=HKCU\Software\The Paradigm Group
SK=HKCU\Software\sk
TotalCommander=HKCU\Software\Ghisler
xTep=HKCU\Software\xTep
[1008_MySoftwareHKLM]
RegExportDirMode=Auto
Adobe=HKLM\Software\Adobe
AdvancedConfig=HKLM\Software\AdvancedConfig
eT9=HKLM\Software\Tegic\eT9
IE=HKLM\Software\Microsoft\Internet Explorer
Opera=HKLM\Software\Opera
PocketMusic=HKLM\Software\PocketMind
SRS=HKLM\Software\SRS
TouchInCallScreen=HKLM\Software\Marzens
[1009_Services]
RegExportDirMode=Auto
Stowaway=HKLM\Services\Stowaway
HTCVol=HKLM\Services\HTCVOLUME
MyPhone=HKLM\Services\MyPhoneService
MediaLibrary=HKLM\Services\MLUService
WinLive=HKLM\Services\Windows Live
PushInternet=HKLM\Services\PushInternetEngine
BTSyncServ=HKLM\Services\BthAsPlugin
deleteops.ini
- below is an example of the deleteops.ini
- used to delete individual files or entire folders
- wildcard (*) can be used
Code:
[DeleteFile]
file1=\Windows\StartUp\HTC*Up.lnk
file2=\Windows\StartUp\sdim.lnk
file3=\Windows\StartUp\Setup*.lnk
file4=\Windows\StartUp\LockDevice.lnk
[DeleteFolder]
folder1=\Windows\Start Menu\Programs\Games
folder2=\Windows\Start Menu\Programs\GPS
folder3=\Windows\Start Menu\Programs\*net
folder4=\Windows\Start Menu\Programs\Multimedia
folder5=\Windows\Start Menu\Programs\Office Mobile
folder6=\Windows\Start Menu\Programs\Tools
anyfilename.auto
- below is an example of an ".auto" file
- used to automate cab installs that require user input
Code:
[AutoFile]
InstallLocation= (0 = device, 1 = storage card)
WindowTitle="Keyboard and Mouse Setup" (name of window to perform actions on)
[ScriptCommands]
1=SendLeft
2=sleep(100)
3=SendCR
4=sleep(1500)
5=SendOK
customlinks.ini
- if you want a link for a specific cab to be installed
- to a different directory than the default
- put exact cab file name without extension as first param
- wildcard (*) can be used
- after cab is installed, the link will be moved to where you want it
Code:
[LNK Files]
Myapp-version*=Programs\MyApps
regedit.Rpr_ARM=Programs\Registry Tools
kevtris=NONE
*=Programs\Other Tools
exeparams.ini
- same as above, filename (no ext) as it exists in _Mod_\filesEXE as first parameter
- parameters go after the equals sign
Code:
[EXE Parameters]
cusTSK=\Windows\Windows Mobile Green.tsk
scriptparams.ini
- same as above, scriptname (no ext) as it exists in _Mod_\filesMSCR as first parameter
- parameters go after the equals sign, inside the quotes
Code:
[Script Parameters]
MyScript="varone=one vartwo=two varthree=three"
Your zip file
Your zip file doesn't work. It gives errors when you try to unzip it.
BTW I search the whole xda for a post saying this and I didn't find one...lol
Other links
Sorry... updating zip file now...
Cingularman said:
Your zip file doesn't work. It gives errors when you try to unzip it.
BTW I search the whole xda for a post saying this and I didn't find one...lol
Click to expand...
Click to collapse
see top post for correct updated file =)
Great reference Ben..as always very well done!
krook6023 said:
Great reference Ben..as always very well done!
Click to expand...
Click to collapse
thanks, just trying to be a contributing member, even if "my" stuff isn't exactly 100% original... MortScript is getting easier by the minute for me, coming from self taught php background a lot of it is similar or the same even... I'm sure there's some languages that php resembles... but I'm not really a programmer of any sort, just an accomplished "tinkerer" heh...
I posted this in the Energy thread - it was suggested I ask here... any help would be great. Thanks.
Hi -
Can you give me a step by step on the order in which you do stuff after flashing (when to reinsert the sim card, when to run PIM Backup, etc.)? I basically stole your entire XDA_UC (thank you btw!) just adding a couple files and reg settings for some applications and a few things don't seem to work for me (i.e., my favorite people never come back in the right order or even the right people, my hotmail gets screwed up, etc.). I just can never seem to get any of the backups to work exactly right and I've tried SASHIMI, NRG's Export/Importer, and XDA_UC. I just think I'm doing something at the wrong time and things are stepping on each other or something. Anyway, thanks for the help!
PS I'm installing the latest 23xxx CHT rom via SD card ...
shannyb1972 said:
Hi -
Can you give me a step by step on the order in which you do stuff after flashing (when to reinsert the sim card, when to run PIM Backup, etc.)? ...snip...
PS I'm installing the latest 23xxx CHT rom via SD card ...
Click to expand...
Click to collapse
sorry for the slow reply, had to pick up my Dad from his elbow surgury and ran into car trouble on the way home (he just spent almost 6k on fixing that stupid thing in about a 2mo period... lol)
anywas... if THIS POST doesn't answer all your questions feel free to ask anything more specific =)
benjamminzIS said:
had to pick up my Dad from his elbow surgury and ran into car trouble on the way home (he just spent almost 6k on fixing that stupid thing in about a 2mo period... lol)
Click to expand...
Click to collapse
The car or the elbow?
Anyway, hope he has a swift recovery (and thanks for the great posts)...
rmanaka said:
The car or the elbow?
Anyway, hope he has a swift recovery (and thanks for the great posts)...
Click to expand...
Click to collapse
ROFLOL... yeah guess I should have been a little clearer on that =P the car... what a waste... american cars = teh suck!
benjamminzIS said:
ROFLOL... yeah guess I should have been a little clearer on that =P the car... what a waste... american cars = teh suck!
Click to expand...
Click to collapse
Maybe we ought to start sponsoring you (like we did NRG for a new Fuze) so you can get a European car?
Tazkika said:
Maybe we ought to start sponsoring you (like we did NRG for a new Fuze) so you can get a European car?
Click to expand...
Click to collapse
lol... no, not my car = crap. my dad's car... lol... my car, Lexus IS300 = wrecked (not the one in sig) into the back of my best friends truck, back in July, was looking (rubbernecking) at flipped car on other side of road, road was wet, person in front of my friend slammed on their brakes to turn left (while I was looking at flipped car) I slid into back of my friends Nissan Titan (I now call them wreckalexuses) LOL I will get another one soon enough, I just got screwed by my insurance company AND GAP coverage and ended up having to pay out because they decided to total it... only thing holding me back at the moment is a 9-5er (or 11-7, hell I'd take anything right now... lol) so no worries...
Look at me! I'm cluttering my own thread!!! heheeee
here is a quick question:
I want to copy a folder and his content from storage card to My Documents\My Pictures.
so from : Storage Card\XDA_UC\Files\ ( ProGloss_60%) this is the folder to be copied )
to : \\\My Documents\My Pictures
how can I do that ?
benjamminzIS said:
sorry for the slow reply, had to pick up my Dad from his elbow surgury and ran into car trouble on the way home (he just spent almost 6k on fixing that stupid thing in about a 2mo period... lol)
anywas... if THIS POST doesn't answer all your questions feel free to ask anything more specific =)
Click to expand...
Click to collapse
Sorry about the car trouble... no worries, I don't consider less than 24 hours a slow response to a message board anyway. You regular posters on this free community board are more responsive than my help desk at work!
Anyway, your post explains very clearly what you do up to flashing the rom. My question is more about the order to do things AFTER you flash. For example, I flashed the latest yesterday and it says "update complete". What is the order I should do things at that point? When to replace the sim, when to hard reset, when to run PIM backup, do I need to manually disable anything that's running, etc.?
Thanks for your help!
ceesheim said:
here is a quick question:
I want to copy a folder and his content from storage card to My Documents\My Pictures.
so from : Storage Card\XDA_UC\Files\ ( ProGloss_60%) this is the folder to be copied )
to : \\\My Documents\My Pictures
how can I do that ?
Click to expand...
Click to collapse
if that's all you want copied then just place it in XDA_UC\Root\My Documents\My Pictures
then use this part of my copy2root script, put it in a txt file and rename the txt to .mscr and place in the XDA_UC folder :
Code:
XCopy( "\Storage Card\XDA_UC\Root\*.*", "", TRUE, TRUE )
if you're already using my mod then just place place them in the folder as I first stated and they will be copied during the setup...
shannyb1972 said:
For example, I flashed the latest yesterday and it says "update complete". What is the order I should do things at that point? When to replace the sim, when to hard reset, when to run PIM backup, do I need to manually disable anything that's running, etc.?
Thanks for your help!
Click to expand...
Click to collapse
O.K... gotcha...
after update:
1. at "update complete" put mSD in
2. put battery back in
3. reboot
4. wait for xda_uc message to pop-up, hit "YES" to start
5. after setup is complete (wait for the second message saying customization is complete, I click NO here)
6. this is where I run TouchProTweak to setup a couple things I haven't figure out how to do via reg settings.
7. remove back cover and slide SIM in over battery (if you don't want to do it this way then slide2shutdown, remove battery and insert SIM)
8. restart
9. wait for connection setup, do setup
10. here is where I enter into manila my facebook, twitter and youtube passwords and link facebook accounts from the all people > updates tab
11. start enjoying your freshly setup rom!
I don't hard reset, because of task29... so far (2wks) I haven't noticed any issues due to not hard resetting after first screen calibration.
as for people tab not being in right order... I don't know if anyone has figured out a fix for that... I don't really use it other than to have those particular people in it, so it doesn't really bother me if it comes back in correct order or not...
thanks will try it .
thanks it worked .
Boy, I hope this isn't a dumb question... I've searched without any luck, but I can't imagine no one has tried this yet: Is there a way to export ActiveSync settings for XDA_UC? I couldn't find anything like that in the Settings Exporter.
Build a new english lite rom with xip/sys ported from 28244 build.
German version same build here
ROM Details:
WM6.5.3 Build 28244.5.3.10
removed sys: widgets, themes, skybox, skymarket, autoupdate, sample music, alarm sounds, entertainment, sqlcemobile, transcriber, windows live, welcome center
removed Samsung apps: all except camera, settings, xt9, dialer, sms-mms
added samsung app: GPRS Counter
added tools: UC_NET, xTask, PIMBackup, Regedit, BT- and Wifi Toggler, Advanced Config 3.3, Dotfred Task manager, Mortscript, Omnia2 Messaging Mgr,
added tweaks: pageppol value is 10 mb, new battery (with percentage) and net icons, AutoClose Patch 1.1, Fileexplorer Extension, HTC Sensor DLL, WM6.1 GPS Driver, Start Menu has 4 grids
registry changes: old settings enabled, Low Mem value, auto lock screen disabled, dialer skin disabled, rotation mapable to hardware key, in call recording, ring delay, smaller popup font size
Remarks:
- Common:
cabs of my thread could be installed
I have not cooked in some of my default tools, like cleanRAM, Opera or Google Maps, cause everyone could install the newest version himself, if he wants to, and so the space isn't used in the rom for those people, that don't want to install them or want to install them to storage card or my storage.
pagepool value: higher, than in my former roms to allow applications like s2u to work properly, low enough to give you the maximum amount of memory
- UC_NET:
With UC_NET you can automatically install all your favourite cabs silently and/or controlled.
Thx to Daskalos for finding this great XDA Dev Application
Create XDA_UC folder on your storage card.
Put your cabs (or .reg, .mscr, .cer files) in XDA_UC, if you want them installed silently
Put your cabs in XDA_UC\manual, if you want to install them with normal dialogue
Put your files in XDA_UC\Copy2Root, which should be copied to the root of your device
Put your self-extracting archives in XDA_UC\Run
Put your self-extracting archives in XDA_UC_Execute if UC_NET should go on while extracting
In Start Menu\Programs\Utilities you can then start your customizing with the UC_NET shortcut. It will default to the folder Storage Card\XDA_UC, but you can choose other folders, too.
Free data memory is: about 290 MB
Free program memory is: about 85 MB with dialer skin disabled
Uploaded fixed version (Mirror) for issues with hardware keyboard
Benchmarks of the new kernel on different devices (HD2, Topaz) has shown it as very fast compared to 22047, 23144, 23145, 23146 or 21682. Look here for a sample on HD2
jensingenbleek is making a benchmark on B7610, too.
Some user reports:
ajeshm: Flashed with this ROM. Working flawlessly with Manila 2.5 Sense 2019 installed. With programs like HTC Phone Canvas, S2U2 loaded after 30 minutes 45mb Free RAM.
reserved for screenshots
works on i8000 ?
Upload finsihed
@tukes: No B7610 only
thanks for this rom!!
you can post the hash file?
didn't have one
Can you compress with RAR and post the crc32?
If you upload file without compress, I can download the corrupted file!!! if you post the crc32 or md5 I compare.
Sorry for my bad english, I speak spanish!!
More thanks!!!
here is from my computer backup file
ok, thanks for this md5 d57f1ea8d645452e3e5875c4c5a037bf.
I download perdect!!
And crc32 is 83EC9F43.
i now test your rom!!!
does it works on i900
how can i upgrade wm 6.1 to wm 6.5 on i900
1. b7610 only
2. search i900 forum on modaco
thunder141 said:
Build a new english lite rom with xip/sys ported from 28244 build.
ROM Details:
WM6.5.3 Build 28244.5.3.10
removed sys: widgets, themes, skybox, skymarket, autoupdate, sample music, alarm sounds, entertainment, sqlcemobile, transcriber, windows live, welcome center
removed Samsung apps: all except camera, settings, xt9, dialer, sms-mms
added samsung app: GPRS Counter
added tools: UC_NET, xTask, PIMBackup, Regedit, BT- and Wifi Toggler, Advanced Config 3.3, Dotfred Task manager, Mortscript, Omnia2 Messaging Mgr,
added tweaks: pageppol value is 10 mb, new battery (with percentage) and net icons, AutoClose Patch 1.1, Fileexplorer Extension, HTC Sensor DLL, WM6.1 GPS Driver, Start Menu has 4 grids
registry changes: old settings enabled, Low Mem value, auto lock screen disabled, dialer skin disabled, rotation mapable to hardware key, in call recording, ring delay, smaller popup font size
Remarks:
- Common:
cabs of my thread could be installed
I have not cooked in some of my default tools, like cleanRAM, Opera or Google Maps, cause everyone could install the newest version himself, if he wants to, and so the space isn't used in the rom for those people, that don't want to install them or want to install them to storage card or my storage.
pagepool value: higher, than in my former roms to allow applications like s2u to work properly, low enough to give you the maximum amount of memory
- UC_NET:
With UC_NET you can automatically install all your favourite cabs silently and/or controlled.
Thx to Daskalos for finding this great XDA Dev Application
Create XDA_UC folder on your storage card.
Put your cabs (or .reg, .mscr, .cer files) in XDA_UC, if you want them installed silently
Put your cabs in XDA_UC\manual, if you want to install them with normal dialogue
Put your files in XDA_UC\Copy2Root, which should be copied to the root of your device
Put your self-extracting archives in XDA_UC\Run
Put your self-extracting archives in XDA_UC_Execute if UC_NET should go on while extracting
In Start Menu\Programs\Utilities you can then start your customizing with the UC_NET shortcut. It will default to the folder Storage Card\XDA_UC, but you can choose other folders, too.
Free data memory is: about 290 MB
Free program memory is: about 85 MB with dialer skin disabled
Download
UPLOADED FIXED VERSION FOR ISSUES WITH HARDWARE KEYBOARD
Click to expand...
Click to collapse
thanks man, is there any backup and restore procedure in case something goes wrong ?
for your personal info use pimbackup.
if flash goes wrong you can always revert to an other rom, so far as you only flash nb0 part.
No danger of brick your phone then.
thunder141 said:
for your personal info use pimbackup.
if flash goes wrong you can always revert to an other rom, so far as you only flash nb0 part.
No danger of brick your phone then.
Click to expand...
Click to collapse
ah ok, thanks for the info mate, I'm looking at the SpB backup for now as it can do the scheduled backup hopefully it sufficient.
ok look sometimes on modaco for new other roms by me ;-)
updated description and links