Related
I bricked my 8525 is it garbage or can HTC reflash it? I repeatedly tried to load the WM6 upgrade from the HTC Site,it kept erroring out at 78% with a 302 error code,I tried rebooting,different USB ports,different PCs,ect.Well it got late and I got tired and attempted to load the "Naked 7" version,kept getting not Hard SPL thing,tried to install Hard SPL,wouldn't or didn't seem to work,still It would connect with Activesync and the recovery thing would continue to load to 78%,So I Got REALLY STUPID and tried loading Faria-X32 or something like that that saw the Phone ,asked about updating the ROM,to which I said YES,it went for about 2 minutes worth of progress then Kicked off,now instead of the RED/GREEN/BLUE/WHITE screen I get the at&t logo with
M 05 R 1.54.07.00
S 04 G 32.86u 7028.23H
B 06 D 3.62
It will no longer "connect" with the Activesync on my Computer,it just stays on the Logo screen with the above in red at the bottom of the screen.
Is it FUBARed forever? Thanks In Advance,Vegaslightsss
Am I asking Questions in the wrong Place?
Sorry I am new to this,am I asking the wrong questions in the wrong place or am I at the wrong site entirely? Of all the searches I did,this was the Site most often recommended,I am not asking to be spoon fed or babied,I just need to know if there is any point in even attemting to fix this myself or if there is anyone,anywhere that has the knowledge/equipment to do this.Thanks in Advance for your Time,Vegaslightsss
You aren't in the wrong place. Fear not, read the wiki. I would help you out, but I own a Wizard, and know next to nothing about the 8525's
!st, congrats on finding us, Its the place that offers salvation when you are writhing in hell.
Now, do a search for Hard SPL on the forum. Download Ver 7.(ver 9 for developers and throws up error messages when finished flashing). Then do a search for HOW to flash Hard SPL via the SD card method. You should find easily enough on either the forum or the wiki.
Please note that this will void warranty BUT as it is just a glorified paperweight now, I dont think that really matters....
After you hard spl your hermes you should be able to reflash it with either the stock rom you were trying or one of the cooked roms that our TOP chefs cook up, I'd recommend TNT SE if its your 1st rom as I found it VERY stable but thats up to you. Download the rom...
Put your hermes into bootloader, hold down power button, OK button above flywheel and soft reset. Make sure all buttons are held down til it powers into tricolour screen. This should tell you what your IPL is (1.04 if you hard spled ver7) and your SPL (2.10 olipro).
On your pc, go to activesync's connection setting and untick "allow usb connections" then connect hermes. Double click thr RUU_Wrapper.exe file and follow the prompts.
Or you can use sd card method (search wiki)
You should also do a check to see if there are any bad blocks but I'd do this after flashing.
Hope this helps...Cheers
Reset fails to bring up Tri Color at&t with red versions frozen
Thank You VERY MUCH for responding,I went out and bought another 8525 with WM6.1 already loaded on it.I still would like to repair my other one,I have dabbled with Satellite testing for years so I am technically literate and quite experienced with flashing ROms ,ect. I have all of the files you suggested,I put the Hard SPL 7 files into onto the Mini SD card and attemted several Hundred (told you I was desperate)times,It just pops right up with the at&t light blue screen with the world logo and all of thr red letters ,I guess the red "R" is indicating the radio is at 1.54.07.00 the "G" is 32.86u.7020.23H the "D" is 3.62 the "m" at 05,the "S" at 04, and the "B" at 06.
M,S,B,and d,come up instantly followed in about 3 seconds by R and G,there seems to be no hope of getting it to take the SPL7 files from the memory card,I downloaded the XDA tools and have attempted to try and boot from SD with no luch,just that damn [email protected] logo screen,Is there anyone on the forums that works on these that I could ship it to and pay for their badly needed services.I am getting to the point that I feel like I am not getting anywhere. If anyone can handle this type of repair please either PM me or whatever. I have to give up before this makes me insane.Thanks,Vegas
Did you copy the .nbh file to the card after formatting it fat 32 and then renaming to "hermimg.nbh"?
You only need to copy a single file into your micro SD card's root folder -> RUU_SIGNED.nbh which needs to be renamed to HERMIMG.nbh
Press and hold the "OK" button at the side and the "POWER" button at the same time then poke the reset hole under the device with the stylus.
its been a while since i've done this, but i believe you need to be able to boot the OS to install hardspl, even if its through the sd card.
to unbrick you phone see this link:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
after u're done, then you can hardspl
able to boot kind of with L+R soft key + reset
I am able to boot, kind of with L+R soft key + reset ,it will breifly show thw tri colored screen but noy stay there,I jumps to a screen that says
"Do you want to erase all user Data and restore to Manufacturers Default?"
YES = QWERTY (R) KEY
NO = QWERTY (X) KEY
I have tried both,both say successful "Press SpaceBar to reboot" of course it boots back to the at&t screen with the little red letters frzen on screen. I have formatted the SD card FAT32 and renamed the file from SPL 7 to hermimg.nbh not sure how or what that is supposed to do,but I have done it,I do see a glimmer of Hope now that I have seen it do something else ,I am reading my butt off but could still use some guideance. Thanks,Vegaslightsss
Ok ,I get it,I need to put a ROM file compatible with my unit,I think it is 1.04,so where would I find that file and what file extension is it? .nbh as well,sorry I am really tring to learn here...Vegaslightsss
I have the WM6 .exe file but don't I need and image of the installed file a a ROM image not an .exe????Vegas
no, its not booting the OS, its stuck at the at&t logo. go through that unbrick guide that i posted.
you *might* be able to save it by flashing the at&t rom here:
http://member.america.htc.com/downl...502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe
put your device into bootloader mode, and then connect it to the pc and run the exe file
Need ROM image to put on my SD card...
tHAT LINK SEEMS TO BE DEAD,i REGISTERED WITH THE SITE JUST FINE,BO NO FILE,whoops,sorry Caps stuck,no file to be seen,the problem is that I can't run any type of exe as the ROM booting is what I need in order for the PC to "see" the phone through USB for activesync,I need the actual "image" for on the SD card in order to get it fired up so I can Hard SPL it...Vegas
sorry, looks like it just wont work with a direct link. go here:
http://www.htc.com/us/FAQ_Detail.aspx?p_id=65&act=sd
and click the download link at the bottom.
and like i said, put your device into bootloader and run that exe file. your pc can still "see" your device while it is in bootloader mode. If you want the image, use winrar to extract the contents of that exe, and then look for the biggest file, and then extract the contents of that file. you should see a RUU_signed.nbh, that's your rom image
Vegaslightsss said:
I am able to boot, kind of with L+R soft key + reset ,it will breifly show thw tri colored screen but noy stay there...
Click to expand...
Click to collapse
Instead of the L+R soft keys, try using the OK button on the left of the device, the power button on the right, then hitting the reset hole. That should put it into the tricolor screen, followed by a screen which says "HERMIMG.nbh" and prints a list of things which it's going to update, then says "Press power button to continue".
Edit: and if you do it without a SD card containing the HERMIMG.nbh file, it should stay in the tricolor screen, with the word "Serial" or "USB" displayed at the bottom, and you can plug it into your computer and flash it that way. I don't use that method, but it involves running the exe file on your computer while the unit is connected by USB cable. See mrvanx's guides for some details.
One thing, if you connect to usb with it in bootloader, FIRST, open activesync(before you connect the hermes) and go to connection settings. Untick "allow usb connections". This will stop activesync trying to sync up and possibly screwing around with the flash. Cheers...
Good read.. I use SD method too flash. As my desktops solaris OS. Good luck, just keep reading. The answer is in the WiKi
Hello,
I would like to upgrate Rom with this one: Schaps_WM6Pro_Hermes_4.31_WWE_Full.exe
I installed Hard-SPL and now I have 2.10.olipro SPL version displayed in the bootloader (before I had 1.4).
Actually, in my Hermes300 I have installed :
WM6.0
ROM: 2.54.258.2
ROM date: 07/06/07 (DD/MM/YY)
RADIO: 1.47.00.10
Protocol: 32.80.7020.20H
ExtROM: 3.54.258.102
I don't know if it is the original ROM upgrade from HTC website, because I'm not the firt owner of the phone.
Anyway, If I try to upgrade it by using autodetect mode an error occurs:"Error, Unknown version! You should pick safe SSPL".
Why? What Do I have to do to have Upgrade? Maybe, is there still some kinda of "brand"? Which option should I have to select?
I want to use the most safe upgrading procedure to avoid brick.
P.s. I'm using Windows Xp.
Thanks!!
Pick safe SSPL..... Follow the instructions after OR use the sd card method.
Format sd card fat32 then copy the .nbh file onto it. Rename it to "Hermimg.nbh". Put it in phone and reset to bootloader. Hold down power button, ok button above flywheel and reset with stylus. Hold all buttons in until you get to tri-colour screen. It should recognize the flash image so then follow the prompts.
Find this safer than pc flash.
Cheers......
Thank you very much I will do it!
But I'd like to understand why autodetect mode doesn't work! Do u hava any ideas? Cannot I choose SPL-2.02./2.10/2.30 New Bootloader and is it HARD-SPL choices? I'm a newbie in upgrading and I only understand that to avoi brick I should use HARD-SPL. If I use Force safe SSPL or SD card method can I have a brick?
How about if autodetect doesn't work because I have installed original ROM upgrade from HTC? It is possible?
Thanks.
No flashing method is a guarantee of success. Hard SPL isn't either, it just makes it easier or even possible to fix your phone. If you interrupt a flash you will brick your phone but with Hard SPL its possible to fix. Except if you interrupt the radio rom portion of the flash. I think its OK to say that if you stuff up this part of the flash you won't be able to fix easily, if at all.
Most, if not all, cooked roms DON'T have a radio rom inside. ALL stock roms do.
This is why I said its safer with sd card method. You would have to physically reset the hermes in the middle of a flash to stuff it. With the pc, usb cables can be unplugged, reset buttons can be pushed and blackouts/brownouts do occur. Thats if Activesync doesn't throw a hissy fit and disconnect while trying to update....
>HARD-SPL just makes it easier or even possible to fix your phone.
Ok, and by using SD CARD procedure is it the same?
I mean...now with HARD-SPL installed on hermes can I use every upgrading procedure to fix my phone (if possible)? Or to take advantage from that do I have to use a particular procedure?
Before writing here I read a post where another guy had my same problem and some people answered him to choose SPL-2.02./2.10/2.30 New Bootloader and is it HARD-SPL. But u think is better by SD CARD.... .
Thanks, and I'm sorry for many questions!
Does Schaps_WM6Pro_Hermes_4.31_WWE_Full.exe have a radio rom inside? I can upgrade only Rom without RADIO? If yes...how?
Thank you very much!
No, Schaps_WM6Pro_Hermes_4.31_WWE_Full doesn't have a radio rom. Look at the list of apps and tweaks included. It will tell you what radio version it has if it has the radio portion included...( this is for ANY cooked rom. The chefs work hard to make these and are rightly proud of their work.)
Here are the instructions for sd card flash again if you missed the first time
1). Format sd card fat32 then copy the .nbh file onto it. Rename it to "Hermimg.nbh".
2). Put it in phone and reset to bootloader - Hold down power button, ok button above flywheel and reset with stylus. Hold all buttons in until you get to tri-colour screen. It should recognize the flash image so then follow the prompts.
Its that easy when you have Hard SPL on your phone...
Cheera...
It worked very well. Thank u very much!
Sow if you don't have Hard Spl on your phone the SD flash method won't work? I have a spv m700 and coun't manage to install hard-spl.
Go to the last few pages of the Hard SPL thread - its a sticky - You'll find out how to install Hard SPL using the sd card method. Don't have to worry about sync errors with the PC then...
Cheers...
I have got Hard-SPL 2.60. Which one should I pick in the SPL Meny? I'm kinda noobish when it comes to this ...
I hope someone can help me , i ve tried a lot of roms, and i cant upgrade it, i also tried the sd flash , but it got stuck on the boot screen , could someone please help me, what should i do?
I need to change the first screen that shows when you soft reset the phone it shows the radio version and rom version.
I need to change it to take it back to the sprint store for repairs. I already flashed back to the stock rom but that radio version screen stayed.
My pc doesnt reckognize my phone either so please help me.
Thanks.
You should have flashed a full stock 3.35 that flashes the radio and rom.
Have you already run the titan relocker?
If not its something that you have to do again b4 turning it in.
In any case put the device back in bootloader mode( power + camera + soft reset hole) see what version spl is on your device.
If ollipro 2.40 or nuespl 2.47 download the 3.35 full update
ftp://Mogulrom:[email protected]_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship.exe
use win rar to extract the files to somewhere on the pc (i.e. c:\titan update\)
rename the RUU_signed.nbh to TITAIMG.nbh copy it to a small micro sd card like the 512mb card that came with your device (has to be formatted to fat32 b4 copying the file)
Insert it into your titan and reboot the device back into bootloader mode wait a few seconds for it to come up asking you to press the power button to flash..
Press the power button and let it flash.. While flashing it should tell you that you are flashing the
OS - < this is your rom
CDMA - < this is the stock rom radio
Splash1 - < first boot splash
Splash2 - < second boot splash
once all is done it will say update complete just remove the battery and re-power the device.
If you did re-lock the device you just need to put nuespl on it you can do this from the device istelf no need for a pc
http://forum.ppcgeeks.com/showthread.php?t=30561
Follow those steps and your rom and rasdio will be stock and you can take it back into sprint without worries.
I truly apreciate this thanks so much.
But just to be sure none of this requires a USB connection to the computer right?
Ill tell how it goes as soon as I get My MSD card back from my car.
Thanks again.
IT WORKED!
I cant thank you enough how relieved I am.
Is there like a Thank buttton or a +Rep I can hit.
Thanks Again.
Glad i could help you out good luck with your replacement copy this thread into and e-mail and e-mail it to yourself if you get into a bind again sometime. Who knows one day i might post with a problem that you could help me out with.
Yeah I just got a replacement they had one in the store.
Thanks again.
Before you start, backup anything on your phone you might want to keep after the new Rom has been flashed as all contacts, emails, texts, notes, Internet BookMarks/ ect. WILL be lost!!
PimBackup is good and free (copy any mms attachments to your storage card or computer seperately)
[FONT="]***THIS TUTORIAL IS FOR THE GSM RAPHAEL'S ONLY!!! DO NOT USE WITH CDMA VERSIONS***[/FONT]
[FONT="]If your phone has a SIM Card Slot then its a GSM Model. Carry on reading.[/FONT]
[FONT="]If it has no SIM Card then its CDMA and you should not use this procedure.[/FONT]
[FONT="]**USE THE WIKI FOR EVERYTHING YOU WANT TO KNOW ABOUT YOUR RAPHAEL**[/FONT]
[FONT="]*ONCE YOU HAVE FLASHED A HARDSPL ITS PERMANENT. YOU DONT NEED TO DO IT AGAIN WHEN FLASHING NEW ROMS OR RADIOS*[/FONT]
[FONT="]*DO NOT start another process while the flashing process is taking place*[/FONT]
[FONT="]*DO NOT click off of the status bar... Let it stay in the foreground* [/FONT]
[FONT="]*DO NOT let the Screensaver activate*[/FONT]
[FONT="](any of these can lead to a bad flash and possibly brick your phone)[/FONT]
*FLASH HARDSPL BEFORE FLASHING ANY CUSTOM ROMS*
[FONT="]1. YOUR DEVICE MUST HAVE AT LEAST 50% BATTERY POWER FIRST BEFORE ATTEMPTING EACH STAGE[/FONT]
[FONT="]2. FLASH HARDSPL[/FONT]
Before flashing make sure you have installed Microsoft .NET Framework 3.5 on your PC
[FONT="]Flashing via ActiveSync with USB Lead (thanks to [/FONT][FONT="]OliNex)[/FONT]
1. Download Hard-SPL package and unzip it to your Hard Drive. Make sure it's launched from a local drive (not through network drive, etc.)
2. REMOVE SIM and SD CARDS!!
3. Turn phone back on and let it boot back into your operating system
4. Connect your phone to PC with a USB cable and wait until it syncs with your PC
5. Run RaphaelHardSPL-Unsigned_190_1_3.exe
6. Follow steps in the RUU (Rom Update Utility), check device for prompts after PC shows loading bar
7. It should go to a black screen now
8. SPL flashes, device automatically reboots, job done
9. To confirm you installed it correctly, go into bootloader mode (tricolour screen!) and verify the screen shows 1.90.OliNex
[FONT="]**To enter Bootloader and check HardSPL version; with the device turned OFF, press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears**[/FONT]
[FONT="]NOTE 1: You will not see the SPL version during normal boot, that is the OS version, not SPL![/FONT]
[FONT="]NOTE 2: Anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the download to the device and run it. Once the screen is black, run RUU manually from the PC.[/FONT]
[FONT="]NOTE 3: This is an unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. Also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, go *HERE*[/FONT]
[FONT="]NOTE 4: DO NOT use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! If you want to flash some other rom, then use customruu from *HERE* [/FONT]
[FONT="]3. SIM AND CID UNLOCK [/FONT][FONT="](OPTIONAL)[/FONT][FONT="].[/FONT]
[FONT="]Note: You do not need to SIM or CID Unlock your phone to flash a new Rom.[/FONT]
[FONT="]If, however you want to flash Diamond/ Blacksone Radios OR use your phone on a different Network then you MUST Unlock your phone.[/FONT]
[FONT="]To Unlock your phone go *HERE*[/FONT]
[FONT="]4. DOWNLOAD AND FLASH YOUR PREFERED ROM.[/FONT]
[FONT="]Flashing Via ActiveSync[/FONT]
[FONT="]1. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer[/FONT]
[FONT="]2. REMOVE SIM and microSD CARDS!![/FONT]
[FONT="]3. Turn phone back on and wait until it syncs with your PC[/FONT]
[FONT="]4. Run the Raphael_RUU.exe (or [/FONT]RaphaelWrapper.exe if thats included instead) [FONT="]from the Roms Folder[/FONT]
[FONT="]5. Once phone finishes flashing and gets to the screen where it configures the stylus, HARD RESET[/FONT]
[FONT="](hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)[/FONT]
[FONT="]6. Follow onscreen instructions to set up your New Rom[/FONT]
[FONT="]7. Once phone has gone through the customisation procedure then replace Sim and microSD Cards[/FONT]
[FONT="]8. Turn phone back on and set up as required[/FONT]
[FONT="]Flashing Via MicroSD Card[/FONT]
[FONT="]1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)[/FONT]
[FONT="]2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer[/FONT]
[FONT="]3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh[/FONT]
[FONT="]4. Copy the RAPHIMG.nbh file to the root of your microSD Card[/FONT]
[FONT="]5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone[/FONT]
[FONT="]7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears[/FONT]
[FONT="]8. Follow the onscreen instructions to start flashing[/FONT]
9. Once phone finishes flashing and says Update Complete, reset with the stylus
[FONT="]10. When it gets to the screen where it configures the stylus, HARD RESET[/FONT]
[FONT="](hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)[/FONT]
[FONT="]11. Follow onscreen instructions to set up your New Rom[/FONT]
[FONT="]5. FLASH PREFERED RADIO IF DESIRED (OPTIONAL).[/FONT]
[FONT="]For more information about different compatible Radios that you can use go *HERE*[/FONT]
[FONT="]**If you want to Flash a Non Raphael Radio then your phone MUST be Security Unlocked** [/FONT]
[FONT="]Flashing Via ActiveSync[/FONT]
[FONT="]Sync your phone with the PC, Run the Raphael_RUU.exe from the Radio's Folder and follow the instructions.[/FONT]
[FONT="]Flashing via MicroSD Card[/FONT]
[FONT="]1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)[/FONT]
[FONT="]2. Download your prefered Radio from the Raphael Rom Develpoment Page and unzip/unrar it to your computer[/FONT]
[FONT="]3. Goto the Radios Folder and rename the .nbh file to RAPHIMG.nbh[/FONT]
[FONT="]4. Copy the RAPHIMG.nbh file to the root of your microSD Card[/FONT]
[FONT="]5. Plug the microSD Card into the phone[/FONT]
[FONT="]6. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears[/FONT]
[FONT="]7. Follow the onscreen instructions to start flashing[/FONT]
[FONT="]8. After the flash finishes press the reset button with the stylus to reset the device[/FONT]
[FONT="]6. JOB DONE[/FONT][FONT="]. Well Done YOU DID IT!![/FONT]
[FONT="]I have attached all the files needed so you dont need to hunt around for anything. Good Luck.[/FONT]
[FONT="]*DISCLAIMER*[/FONT]
[FONT="]I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.[/FONT]
** FREQUENTLY ASKED QUESTIONS AND HELP WHEN FLASHING **
1. What the benifits are of flashing a new rom?
Flashing a New Rom basically gets rid of all the garbage thats included on Stock Roms and Flashes a Clean, Optimized, Fully loaded Rom that will squeeze every ounce of speed and stability from your phone. Chefs usually include all the programs you are ever likely to need and because the Rom has been cleaned out you are left with more memory to play around with.
2. What are the different types of Unlock? (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device (i.e. Raphael) - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash Hard SPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Also, SuperCID is an even older concept no longer valid on newer devices.
Wow, Great job Mskip!
Just wat i was looking for.
A couple questions though...
1. These instructions will also work on the Fuze, right?
2. Once the phone is done flashing and it is booting up, we are sopposed to HARD RESET when we get to the Stylus Config part?...I didnt know that...ive read some other tutorials, and this step isnt included? ?
Fuze, yes. Sprint, no. There's no Hard-SPL for CDMA phones yet I believe.
Thanks a lot! just what I was looking for (the bit about not needing CID unlock to flash roms.. just hardspl).
gj, mskip, but shouldn't you be clear that your instructions and links are only for GSM Raphaels???? As of the past few weeks the flood gates are now open among 5 North American carriers for the CDMA version of the Raphael. No sense in encouraging confusion and hassles from those less in the know.
There is a release for an unlocker for the CDMA phones, but after a quick search some may mistakenly find themselves to your links and info here.
Keystone said:
gj, mskip, but shouldn't you be clear that your instructions and links are only for GSM Raphaels???? As of the past few weeks the flood gates are now open among 5 North American carriers for the CDMA version of the Raphael. No sense in encouraging confusion and hassles from those less in the know.
There is a release for an unlocker for the CDMA phones, but after a quick search some may mistakenly find themselves to your links and info here.
Click to expand...
Click to collapse
Thanks for the info its been noted in the tutorial. I was only asked to write it last night so any information or changes needed are welcomed
Which button is the "action button"?
mhumphrey said:
Which button is the "action button"?
Click to expand...
Click to collapse
Its the ENTER (center) Button. I have amended the instructions to make that part easier to understand.
might sound stupid, but I think you should say what RUU means and what it is...
first time I flashed hardSPL I couldnt find what this RUU means (while reading steps before flashing).
I started flashing without knowing what it was, when I opened the .exe its title was self-explaining, but its hard to know before starting... because the .exe name is not RUU or something like that
Sorry for bad english!
respider said:
might sound stupid, but I think you should say what RUU means and what it is...
first time I flashed hardSPL I couldnt find what this RUU means (while reading steps before flashing).
I started flashing without knowing what it was, when I opened the .exe its title was self-explaining, but its hard to know before starting... because the .exe name is not RUU or something like that
Sorry for bad english!
Click to expand...
Click to collapse
Done. Thanks for the input
Thanks great guide!
Wish i had this my 1st time flashing i was confused as ever
Thanks for taking the time to write this guide for all of the noobs (like me ). I'm still unsure whether I'm willing to gamble right away with my Fuze next month, but I've made sure this thread is bookmarked in case I decide to take the plunge!
What should one do if using the MicroSD card method and the Olinex HardSPL says Loading... No Image File!
Coromoto said:
What should one do if using the MicroSD card method and the Olinex HardSPL says Loading... No Image File!
Click to expand...
Click to collapse
you cant flash HardSPL via microSD Card
Bricked Fuze?
I was using OliPro Rapheal Unlocker and seemed to have bricked myself. (my fault, I understand the risk) I'm not a total newbee, but first time I ran into this. Any ideas how to get past a Upgrade ROM code error? Updated from 8525 to Fuze.
lmeyers said:
I was using OliPro Rapheal Unlocker and seemed to have bricked myself. (my fault, I understand the risk) I'm not a total newbee, but first time I ran into this. Any ideas how to get past a Upgrade ROM code error? Updated from 8525 to Fuze.
Click to expand...
Click to collapse
I dont recognize the SPL version in your signature is it from Oli's Sim/CID Unlocker?
Can you explain exactly what you have done to your phone and when you bricked it please. Also can you load your Rom up or does it get stuck.
Have you tried flashing the HardSPL from Step1?
lmeyers said:
I was using OliPro Rapheal Unlocker and seemed to have bricked myself. (my fault, I understand the risk) I'm not a total newbee, but first time I ran into this. Any ideas how to get past a Upgrade ROM code error? Updated from 8525 to Fuze.
Click to expand...
Click to collapse
If you flashed the hardspl, then you should be fine and should not have done any lasting damage. You didn't read the part of the instructions that tell you that you must first flash a 1.01 version of the att radio. You can get that here:
http://www.rapidspread.com/file.jsp?id=v3q7csfizy
If you don't then you get the rom upgrade error. Just put your phone into bootloader (tri-color screen), and flash that radio. Also, as always, questions about specific roms, apps, etc should be posted in the thread they came from. That is where all the people most knowledgable about the subject are most likely to read it.
@Mskip, i think that SPL is for his 8525 not his fuze.
scotchua said:
If you flashed the hardspl, then you should be fine and should not have done any lasting damage. You didn't read the part of the instructions that tell you that you must first flash a 1.01 version of the att radio. You can get that here:
http://www.rapidspread.com/file.jsp?id=v3q7csfizy
If you don't then you get the rom upgrade error. Just put your phone into bootloader (tri-color screen), and flash that radio. Also, as always, questions about specific roms, apps, etc should be posted in the thread they came from. That is where all the people most knowledgable about the subject are most likely to read it.
@Mskip, i think that SPL is for his 8525 not his fuze.
Click to expand...
Click to collapse
oh ok lol thanks for the input scot
mskip said:
you cant flash HardSPL via microSD Card
Click to expand...
Click to collapse
I did know and realize that, and your walkthrough doesn't give instructions for that either, but rather for flashing a ROM using the mSD method.
I was referring to flashing a new ROM from the MicroSD card and getting this error message in the HardSPL Bootloader screen. The ROM image has the proper name (RAPHIMG.nbh) but isn't seen by the OliNex bootloader.
--------------------------------------------------------------------------------
My Mogul was taken to a store that flashes phones to cricket. So it was ok before I took it to the store now. When I turn the phone on it boots to the smart mobility screen says "No Radio" then turns right off. I formatted my microSD card put the TITAIMG>nbh file on the card put my phone in the bootloader mode. Now my phone turns on and stay in the smart mobility screen w/ the No Radio still on it, and thats it. Is this phone dead? If not HELP!
forlovebeyou said:
--------------------------------------------------------------------------------
My Mogul was taken to a store that flashes phones to cricket. So it was ok before I took it to the store now. When I turn the phone on it boots to the smart mobility screen says "No Radio" then turns right off. I formatted my microSD card put the TITAIMG>nbh file on the card put my phone in the bootloader mode. Now my phone turns on and stay in the smart mobility screen w/ the No Radio still on it, and thats it. Is this phone dead? If not HELP!
Click to expand...
Click to collapse
If you paid someone to flash it, take it back! Did they give you back a non working phone? You'd think they would have tested it???
It sounds like you have a rom / Radio incompatibility problem. Or no radio at all. You say that you put the radio nbh on the card and put it into bootloader mode, but did you actually flash the radio? Did it come up with the grey screen and blue progress bar showing it was actually flashing the Radio rom?
Mogul Dead
No my phone did not do any of that stuff. And no I do not think that I flashed the radio I don't know how. I put the nbh file on the card insert it put it in the tri color screen and nothing happens. Man I am screwed. The kid at the store is saying that I did something & I did not. I have been reading alot cause I do not know anything about this flashing stuff and it does seem like there might be a radio/rom compatability thing going on cause the phone says no radio. I followed some forum steps to no avail.
dude if you get the tri color boot loader screen you did not kill your phone, all you need to do is flash your radio, witch is completely seprate from flashing your OS. just read the wiki and relax
The phone is telling you what is wrong "No Radio" you should be able to flash a radio via your sd card then flash a rom and all should be well. You just need to make sure the radio is compatable to the ROM. What is your ROM Version that shows on your boot screen. Also what bootloader is installed (tricolor screen)
I realize English isn't your primary language, but based on how you phrased your last comment, it sounds like you are inserting the SD card after the tri color screen.
The card needs to be in the phone before you press the 3 buttons for the boot loader screen, then it should see it.
BTC
Mogul Dead
Ok great sounds like from the replies that my mogul is not dead. Ok thanks guys. Also when I put the phone in the bootloader modethe tro color screen the card is already inserted, and the bootloader is SPL-2.40.Olipro. I do not know what ROM was put on the phone when it came from the store. So yeah I just might have to keep tyring to combine the right radio for the right rom thats on the phone.
find radio 3.42.50 and flash it via your sd card
then find the rom you want .....example.... DCD 3.2.6 and flash it via your sd card
then install dcd's carrier cab for you carrier and you should be up and running
Mogul Dead
How do I flash DCD's ROM to the sd card I never did this.
Do you have a ROM ready to flash? If so just goto the wiki link for the Titan's and do some reading. Everything you'll ever need to know about flashing is in there...
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Focus on the radio first, once you get it flashed, then you can worry about flashing the rom.
For the rom (not radio) it's much easier, from the tri-color screen, plug in your USB cable and run the .exe file and it will flash.
However, get the radio updated first.
Try the 3.42.50 radio, I personally use 3.42.40 but they are very close and both support the same roms.
BTC
Freaking out as well
I'm stuck at the tri-color screen after updating the bootloader to 2.40.Olipro , I thought I could update the bootloader and still go into my Windows 6.1 install (and update the rest later).
I thought I totally screwed up my phone until I read this thread so hopefully there is still hope for this.
I do not have an SD card so I'm trying to do it the USB method by downloading the "ROM Update Utility" and placing the TITAIMG.NBH file into the RUU directory. It seems to work but stops at about 8% and the phone goes black then the PDA Phone ROM Update Utility pops up a:
ERROR [328]: INVALID COMMAND
This update utility cannot be used for your PDA Phone. Please check your Update Utility.
As you can imagine I'm absolutely panicked right now and will appreciate ANY help!
well save yourself some grief and buy a 2 gig microSD card. Then all you have to do is put the radio ROM on it, go into bootloader mode and let it flash. That is the safest and easiest way to do it. Also less, read nill, chance of bricking your phone.
Ok I'm heading out the door to Best Buy right now...
So once I get the radio installed, I then install DCD using the SD card method? Then the carrier cab?
I've already updated the bootloader to 2.40 using the USB method, will mixing these two cause any issues?
Now that I'm totally stuck at the bootloader, are there any precautions I should take before continuing?!?
Thanks so much for the help, I can't wait to get this going and maybe help out people like myself in the future
I got a 2gb card, formatted it to FAT32, downloaded 3.42.50 radio, renamed it and placed it into the root directory of the card.
I then put it into the phone, then did a POWER+CAMERA+RESET. It comes back to the bootloader screen doing nothing.
I've been reading around and it looks like I'm doing everything correct???? It just sits there and at the bottom it says "Serial"
EDIT: Oh you have to HOLD that combination for a couple seconds. Got it, I'll keep going on the process....
Here's what I just recently posted in another thread for someone wanting step by step instructions on how to flash the phone. He said he followed it and it worked so hopefully it helps you out.
1. Download everything you will need.
a) nueSPL 2.47 from http://www.nuerom.com/BlogEngine/pag...HTC-Titan.aspx
b) Radio 3.42.50 from http://forum.xda-developers.com/showthread.php?t=415364
c) The ROM from http://www.scottcrosler.com/
2. Back up your SD card and then format your SD card into FAT32 with less than 4kb cluster size. Open My Computer, right click on your SD card, select format and adjust the settings accordingly.
3. Run nueSPL 2.47 on your phone with your SD card in. It will reformat your SD card again and put the bootloader on it. When you reset your phone it will install the bootloader. Just follow the instructions.
4. Copy the nbh file from the radio rom onto your SD card and rename it to TITAIMG.nbh. Put it in your phone and put the phone into bootloader mode by pressing CAMERA, POWER, and RESET (the recessed button on the bottom of the phone) at the same time. When it starts up it should come up with a grey screen telling you to press POWER to continue flashing. Do this and wait for it to complete. When it is complete delete the nbh file from your card using your computer.
5. Put the phone into bootloader mode again using the same method as before. Connect your phone via USB to your computer and run the ROM flashing exe to flash the rom. Just follow the instructions that come up. It's easy. When that is done your phone has the ROM installed. If the USB method does not work for you, look for the largest .nbh file and copy it to your SD card, rename the .nbh file to TITAIMG.nbh again, and reset into bootloader again. You should get the same screen as you did when you flashed the radio. When it's complete the ROM is installed.
6. Run the CAB file from My Documents to extract all the other cabs. After that is complete look for the cab for your carrier and install that. Soft reset.
7. Your phone should work now.
I think that's it. Anyone else feel free to correct anything I probably have wrong... I just wrote that from memory. It's normally easy to do and you just follow the on screen prompts so I might've made some mistakes. I always just flash via SD now because it's so easy and I don't require a PC for anything.
Click to expand...
Click to collapse
The bold text is a step I left out for the other person but he figured it out.
Edit: Oh yeah, skip the part where you install the bootloader (step 3) since you're already running an unlocked bootloader and don't have a working OS on the phone to install 2.47. Once you have a working OS you can go ahead and update from 2.40 to 2.47 if you want a slight improvement in performance. It will not require you to reflash everything else again (or at least didn't for me).
Yes! 100% working. Didn't even have to call Verizon to reactive it, everything was ready to go as soon as I got the new rom.
Thanks for the help!
sprint no evdo no gps
phone works great but cant get online and gps does not work but phone service works ? damn and its only 24 hrs old i broke it using rom and raido from above
kyjelly said:
phone works great but cant get online and gps does not work but phone service works ? damn and its only 24 hrs old i broke it using rom and raido from above
Click to expand...
Click to collapse
Did you install the carrier cab?
Also see in EPST. If you use EVDO, may be login and pass are erased after flash. I had same problem with official Sprint ROM.
And what kind of GPS you are talking about? aGPS?