is there some people that have installed a stick usb dvb-t on htc???
thank you
xmorpheusx81 said:
is there some people that have installed a stick usb dvb-t on htc???
thank you
Click to expand...
Click to collapse
A very interesting question, not thought of that one. I will be interested to see any answers! Quite a lot of USB stuff does work.
Regards
Jay
no USB dvbt drivers anywhere for Windows mobile I am afraid, perhaps it could be possible to adapt some drive from a device with internal dvbt, but no likely since it sould match the TV chipset in the USB stick and enable communication through USB, also there is the software and front end.
There are other possible solutions tough, I posted in an old thread , don't ask because I do not remember which one but i think it was related to this, so perhaps some search find it.
supposedly there are two devices in development, one is a dvbt bluetooth device and the other is a DAB device
Found it
http://forum.xda-developers.com/showthread.php?t=398325
Check the links in post 19
also you may be interested in this thread
http://forum.xda-developers.com/showthread.php?t=310785
driver usb dvb-stick
thanks for reply,
i try with windows xp driver without success
if there is some people that have advice
i 'm very happy
thank you
Hi,
how about this device.
bluetooth DTV receiver for Windows Mobiles.
http://pockethacks.com/bluetooth-digital-tv-receiver-for-windows-mobile-devices/
hello,, i decide to make this guide, on how to change the micro usb port of our x10..
first of all you need to have the right tools do disassemble your phone..
you can search the web for a good disassemble guide i found one so you can follow,,, http://www.xperiax10.net/2010/05/10/xperia-x10-disassembly-guide/
notice follow guide till step 12,,, and dont use screwdriver to removed ribbons you can doit whit your nail or the guitar pick or a plastic card (DONT USE THE SCREWDRIVER you might damage the board and the cables
next once your phone is apart,, you need a good soldering station,, to removed the two solder points benet the usb port.
once you removed the old micro usb port.. please be sure there were no residual soldier in the soldier points.
once that is done,, alinge the new usb port,, and solder back...
be sure to use a small solder tip
well this is it,, hope this help you,, it help me,, but since i forgot to make a video or take pictures on how do i did it,, i use some pics on the web and try to explain as clear as possible..
MacDrunk said:
hello,, i decide to make this guide, on how to change the micro usb port of our x10..
first of all you need to have the right tools do disassemble your phone..
you can search the web for a good disassemble guide i found one so you can follow,,, http://www.xperiax10.net/2010/05/10/xperia-x10-disassembly-guide/
notice follow guide till step 12,,, and dont use screwdriver to removed ribbons you can doit whit your nail or the guitar pick or a plastic card (DONT USE THE SCREWDRIVER you might damage the board and the cables
next once your phone is apart,, you need a good soldering station,, to removed the two solder points benet the usb port.
once you removed the old micro usb port.. please be sure there were no residual soldier in the soldier points.
once that is done,, alinge the new usb port,, and solder back...
be sure to use a small solder tip
well this is it,, hope this help you,, it help me,, but since i forgot to make a video or take pictures on how do i did it,, i use some pics on the web and try to explain as clear as possible..
Click to expand...
Click to collapse
You'll also have to pry harder in step 5 than you think. If you're using a credit card rather than the sim card holder shown in the guide, don't expect it to be usable as a credit card again as the corners will be bent. When I had disassembled a couple of X10's last weekend I totally demolished an old Visa card.
BTW, nice guide for replacing the Micro USB port!! Maybe you could ask the mods to get it moved over to the general section rather than leaving it here in Q&A.
I have some video an other links here that may help.
And ALL this is thanks to Mckebapp for all his work (you are/He is the shiznit ).
Except for the Videos (I wish i still had his) and the thanks go too the makers.
http://www.youtube.com/results?search_query=Xperia+X10+Disassembly+Guide&aq=f
http://forum.xda-developers.com/showthread.php?t=1172067
http://forum.xda-developers.com/showthread.php?p=6368979#post6368979
http://forum.xda-developers.com/showthread.php?p=6258485#poststop
mods please move it to general thread
---------- Post added at 10:42 PM ---------- Previous post was at 10:37 PM ----------
Patricks_book said:
I have some video an other links here that may help.
And ALL this is thanks to Mckebapp for all his work (you are/He is the shiznit ).
Except for the Videos (I wish i still had his) and the thanks go too the makers.
http://www.youtube.com/results?search_query=Xperia+X10+Disassembly+Guide&aq=f
http://forum.xda-developers.com/showthread.php?t=1172067
http://forum.xda-developers.com/showthread.php?p=6368979#post6368979
http://forum.xda-developers.com/showthread.php?p=6258485#poststop
Click to expand...
Click to collapse
none of those sites have the micro usb charging port,, i found it on ebay here is the link
http://www.ebay.com/itm/MICRO-USB-C...ccessories&hash=item5d2f664d90#ht_1957wt_1110
this is the subject in this thread the micro usb charging port
Xperia X10 Disassembly
This is an addition to your dis-assembly guide from a post that I did awhile ago 16th July 2011 Fixing USB PORT X10 Dis-assembly/Repair and two from McKebapp 2nd May 2010 Xperia X10 Disassembly/21st April 2010 Upskirt Shots inside --> X10 Disassembled. Although their are some parts links, and video links because you said that you had none.
It is always good to check the Thread search before starting a new one. I also asked for people to put links to parts in this thread so it could be like a one stop shop to fix your phone. Although ebay would not be a good stable place for parts I'm sure you would check there if you where looking.
Below is the link to my thread if you have any STABLE parts link.
And thanks for the help an sorry if you misinterpreted my reply.
http://forum.xda-developers.com/showthread.php?t=1172067
Patricks_book said:
This is an addition to your dis-assembly guide from a post that I did awhile ago 16th July 2011 Fixing USB PORT X10 Dis-assembly/Repair and two from McKebapp 2nd May 2010 Xperia X10 Disassembly/21st April 2010 Upskirt Shots inside --> X10 Disassembled. Although their are some parts links, and video links because you said that you had none.
It is always good to check the Thread search before starting a new one. I also asked for people to put links to parts in this thread so it could be like a one stop shop to fix your phone. Although ebay would not be a good stable place for parts I'm sure you would check there if you where looking.
Below is the link to my thread if you have any STABLE parts link.
And thanks for the help an sorry if you misinterpreted my reply.
http://forum.xda-developers.com/showthread.php?t=1172067
Click to expand...
Click to collapse
not at all i apreciate the help,, thanks for doing it
regards,,,, from mexico hehehe
MacDrunk said:
not at all i apreciate the help,, thanks for doing it
regards,,,, from mexico hehehe
Click to expand...
Click to collapse
Thanks for ilustrative post, you have a PM, checkit please
Hello!
I’ve to make an Android high school project and I’ll need to send signals through the USB cable (the interpretation of these will be another project) so be able to send 1 or 0s will be enough I guess…
To get that, I’d need the USB Host mod or the Accessory one?
I was thinking to buy this tablet for testing that has USB Host and 2.3.4 Android version but I’m not completely sure if it will be compatible….
Thank you very much!
Please....
no one?....
sadly, with the cheap 'Chinese knockoff' tablets, there's pretty much no way to know something like that.
I say get an old android phone with at least some dev support off Craigslist or something for your problem. An OG Droid (for example) would have more than enough supports and preexisting hacks for you to be able to program the USB port a little.
Thank you strongly. I supposed that all, but my intentions were to get "send that signals" using an non-customed ROM and a "cheap" Android device (I can't no waste to much money on this)
Read in the specifications USB OTG made me think that will be posible to control USB...
Anyway, would you know the difference between USB Host and Accessory?
Thank you very much!
http://developer.android.com/guide/topics/usb/accessory.html
^that should help explain it.
Thank you, I have read before but the only difference I saw was the power source location....:S
Hello,
some time ago I saw a thread in the SGS2 section where a user described how to build a cable for music and charging. It was build like this:
___________ AUX>:===_
___________ USB>:===_______SGS2 Mini USB
I want to build this cable on my own, but unfortunately I can not find the tutorial from this user any more.
Maybe somebody can help?
Regards,
johnny crab
Anyone know something?
I do know the post you mean. I remember seeing it late last year/early this year & it was in the Accessories section. Sorry I don't have a bookmark or link to share :-( you might have to search through Accessories to find it.
I already did research in the accessoire forum but I could not find it... :-(
Has anyone been able to find a cable like this? Would be great if anyone knew where I could find one
HI all.
I dont know if this go here... hope it does.
I wanna ask if somebody can give me a diagram to make this
https://www.banggood.com/Micro-USB-...4884201901&custlinkid=267261&cur_warehouse=CN
I cant buy outside my country, and nobody sell this kind of cable in my country.
So, please if someboyd knows, please share.
Thanks!
if some admin want to delete this! I found a video that explain this! Thanks anyway all.
Post ur video link
Sent from my GM1901 using Tapatalk