Related
Does anyone know where I can find a replacement cover for the headset port? Mine seemed to have ripped right out.
yup, me too, the rubber cover was missing...but I am still looking here I guess I can find it somewhere...just need to work around quiapo (hehehe) =o
red_hanks said:
yup, me too, the rubber cover was missing...but I am still looking here I guess I can find it somewhere...just need to work around quiapo (hehehe) =o
Click to expand...
Click to collapse
look on ebay. quite a few both working and non working ones listed for cheap.
great way to get parts. =)
yes, thank you for that but the cost for the part against the cost for shipping is way to expensive...=(
Anyone else got the official HTC Hero Cradle?
Mine just arrived and whilst it looks good there are a few faults..
It collects fingerprints like mad, and the bigger problem.. because of the chin on the hero it stands too straight upright.. it needs to be laid back a little more to make it easier to read if its in front of you on a desk.
It wouldn't be a problem on any phone thats straight (the cradle is universal and can have little adapters fitted for a few different HTC models).. but because of the curve of the chin the usb socket points at a weird angle.
I've got the cradle. It does collect fingerprints like mad, but the angle doesn't bother me at all.
the angle doesnt bother me. trying to get it out of the cradle bothers me. seems so difficult to pull out or even put in for that matter. will this ease up the more i use it?
SimplySquare said:
the angle doesnt bother me. trying to get it out of the cradle bothers me. seems so difficult to pull out or even put in for that matter. will this ease up the more i use it?
Click to expand...
Click to collapse
Yes it will.
must say I'm pretty dissapointed with accessories for Hero. Official cradle seems to expensive, and to find cheaper one that has audio output on it? asking too much.
http://cgi.ebay.com/USB-AC-Dual-Bat...wItemQQptZPDA_Accessories?hash=item414c23acfb
looks like this can be it. but, can any cradle be used if the phone is in "soft silicon gel case cover" ?
Dac0908 said:
must say I'm pretty dissapointed with accessories for Hero. Official cradle seems to expensive, and to find cheaper one that has audio output on it? asking too much.
http://cgi.ebay.com/USB-AC-Dual-Bat...wItemQQptZPDA_Accessories?hash=item414c23acfb
looks like this can be it. but, can any cradle be used if the phone is in "soft silicon gel case cover" ?
Click to expand...
Click to collapse
I bought that cradle and it's a piece of sh*t!
It's huge and doesn't even charge the phone sometimes. Stay away!
bunt83 said:
I bought that cradle and it's a piece of sh*t!
It's huge and doesn't even charge the phone sometimes. Stay away!
Click to expand...
Click to collapse
I had one of these for another HTC phone (I can't even remember which now) and you need to have DC5V and USB both connected to reliably charge. And come on it's not that big
As for the official cradle, yes it is pretty expensive but it is very well made and don't forget it is universal - so you can just replace the adapter when you change to another HTC phone, ala iPod docks. Don't think it fits the Nexus One though? Or maybe just not yet.
ok thanx
I thought that it would be an easy thing to find. and cheap. but it's not really, looking at iSomething accessories, well... it's very hard to compare. There is iEverythingYouCanThinkOf, but only one or two models of HTC compatible docks with audio output. that's sad.
As long as the dock has a proper HTC ExtUSB connector on it and not just mini-usb you can get audio out easily from any of them.
Grab an Ext USB 3-in-1 Splitter from ebay (They look like this: http://forum.xda-developers.com/attachment.php?attachmentid=57219&d=1194430021)
And plug into the dock.. thats what I did when I was using my kaiser dock before I bought the official one.
yes that was my plan
but noone said anything about docking a Hero with silicon gel protection on it? it's only about 2mm thick but will it fit? hmm...
Dac0908 said:
yes that was my plan
but noone said anything about docking a Hero with silicon gel protection on it? it's only about 2mm thick but will it fit? hmm...
Click to expand...
Click to collapse
hello, anyone?
Dac0908 said:
must say I'm pretty dissapointed with accessories for Hero. Official cradle seems to expensive, and to find cheaper one that has audio output on it? asking too much.
http://cgi.ebay.com/USB-AC-Dual-Bat...wItemQQptZPDA_Accessories?hash=item414c23acfb
looks like this can be it. but, can any cradle be used if the phone is in "soft silicon gel case cover" ?
Click to expand...
Click to collapse
I think that it does support audio out. See this: http://www.mtpdata.dk/htc/htc-hero/cradle-dockingstation-til-htc-hero-med-pladsslot.html the website is danish but look at the pictures.
Looks nice, I sure wish Sprint would have left the CDMA Hero alone.
i'm using this one
http://www.mugen-power-batteries.co...radle-with-2nd-battery-slot-for-htc-hero.html
good cradle !!
Lucaryholt said:
I think that it does support audio out. See this: http://www.mtpdata.dk/htc/htc-hero/cradle-dockingstation-til-htc-hero-med-pladsslot.html the website is danish but look at the pictures.
Click to expand...
Click to collapse
Yeah it has audio out + room for an extra battery
From the site :
- Docking Station / Cradle for HTC Hero
(with USB cable + power cable)
NoteThis dock only fits HTC HERO , and not to other HTC smartphones / phones!
Docking Station / Cradle for synchronization of data (between phone and PC) and to charge your HTC HERO and / or extra battery.
Besides that, this dock also separate Audio-Out port!
Click to expand...
Click to collapse
Lucaryholt said:
I think that it does support audio out. See this: http://www.mtpdata.dk/htc/htc-hero/cradle-dockingstation-til-htc-hero-med-pladsslot.html the website is danish but look at the pictures.
Click to expand...
Click to collapse
hey man! thanks a bunch. my thing is, i dont know s**t of danish exept for dryer and kierkegaard.
does that website sell to portugal? that dock is awesome.
kudos
http://cgi.ebay.co.uk/AIO-DELUXE-BA...ories_MobilePhoneChargers&hash=item2557d93076
A bit expensive for me though... xd
RCOO said:
http://cgi.ebay.co.uk/AIO-DELUXE-BA...ories_MobilePhoneChargers&hash=item2557d93076
A bit expensive for me though... xd
Click to expand...
Click to collapse
dang, man! shure is deluxe. even prettier than official cradle. and also a bit expensive for us in this corner of europe... )=
hello everybody
I held off getting a car dock for my Captivate since i knew i was getting a new car (mounting would have been much different). now that things are settled with the SGS2, i finally got around to ordering my dock...
http://www.proclipusa.com/brodit-de...d-cigarette-lighter-adapter-512255-18750.aspx
great options from ProClip USA, but since my car's cig lighter is behind my right arm (07 S2000) the only option i had was to get the hard wired one (http://www.proclipusa.com/brodit-de...cord-for-fixed-installation-513255-18750.aspx). when i get this installed and wired up, i'll post pics. i'm going to love the set up, now i'll just need to buy a new BT (A2DP) enabled HU so i can eliminate all visible wires from my cabin...
pics to follow
this car dock is amazing... i just installed it and hard-wired it into my cigarette lighter for power, and it works perfectly. the phone fits in nice and snug, yet pulls out easily (but not too easily that it would ever just fly out on its own).
does the dock accept the phone with a case on .. or is it a pretty snug fit?
buy the adjustable one. have had mine for my last 3 smartphones.
http://www.proclipusa.com/brodit-device-holder/samsung-galaxy-s-ii-(at&t)/adjustable-holder-with-tilt-swivel-875214-18750.aspx
Coreym said:
does the dock accept the phone with a case on .. or is it a pretty snug fit?
Click to expand...
Click to collapse
not at all... it fits as snug as you can get...
pinoyxpryde said:
buy the adjustable one. have had mine for my last 3 smartphones.
http://www.proclipusa.com/brodit-device-holder/samsung-galaxy-s-ii-(at&t)/adjustable-holder-with-tilt-swivel-875214-18750.aspx
Click to expand...
Click to collapse
what he said...
The adjustable one fits great with a thin skin on the GS2. I"m also on my third phone with the same cradle
If you have multiple vehicles, or phones also consider the proclip quick release system.
[I'm new so no links for me. go to proclipusa & search for "move clip"]
makes daily mix & match a 10 second operation.
pinoyxpryde said:
buy the adjustable one. have had mine for my last 3 smartphones.
[
Click to expand...
Click to collapse
Lucke said:
this car dock is amazing... i just installed it and hard-wired it into my cigarette lighter for power, and it works perfectly. the phone fits in nice and snug, yet pulls out easily (but not too easily that it would ever just fly out on its own).
Click to expand...
Click to collapse
Do you keep the phone on it's side like that? Do you have issues during a turn? The website mentions issues with cell/gps signals with the phone horizontal. Do you see that? Are the 'arms' that hold the phone made of metal or plastic?
Same questions to the guy above who said he had the adjustable version. I was thinking, I'd like to do a micro-usb charging/AUX analog audio output cable (instructions are on this forum). I'd like to keep my case though. And this looks like the perfect solution. I might have to fab something up to put the phone on my dash above the stereo (for optimum viewing/GPS angle). Any thoughts on that idea? Thanks!
Jim
CNLiberal said:
Do you keep the phone on it's side like that? Do you have issues during a turn? The website mentions issues with cell/gps signals with the phone horizontal. Do you see that? Are the 'arms' that hold the phone made of metal or plastic?
Same questions to the guy above who said he had the adjustable version. I was thinking, I'd like to do a micro-usb charging/AUX analog audio output cable (instructions are on this forum). I'd like to keep my case though. And this looks like the perfect solution. I might have to fab something up to put the phone on my dash above the stereo (for optimum viewing/GPS angle). Any thoughts on that idea? Thanks!
Jim
Click to expand...
Click to collapse
no problems with GPS while the phone is is landscape mode. no issues while turning either as the phone fits very snugly in there. the sides that hold the phone in are thick plastic and have "channels" for where the phone slides in.
I need a desktop dock and a car dock for my Evo 3D. Any suggestions for a good and cheap dock?
Is there a dock that you can put the phone in and it will charge the phone and also have an audio output on the dock? I don't know if this is possible but if there is one I would like to get it. That way I could connect (and leave connected) some speakers (or the car's aux input) to an audio output on the dock. So I could just drop the phone into the dock and it would charge plus the audio would already be hooked up.
If this isn't possible then I guess just a good desktop and car dock suggestion for cheap (that charge the phone) and will fit with a kickstand case.
Dunno about cheap, look around on pricing, but Kidigi do both a car dock and a desk dock (No idea about the audio bit).
http://www.ebay.co.uk/itm/NEW-CAR-HOLDER-MOUNT-CHARGER-HTC-EVO-3D-/110729003340
I use this, perfect for me
THISIS50.com if its hot its here
I use the Seidio dock at work and at home. It doesn't have an audio out that I know of, but it works great with my case (also made by Seidio - I'm not sure if you'll have success with a non-Seidio case). If you don't have a case it will work fine, also.
Not sure about a car dock but I know there are several options out there.
http://www.ebay.co.uk/itm/NEW-CAR-HOLDER-MOUNT-CHARGER-HTC-EVO-3D-/110729003340
I use this, perfect for me
THISIS50.com if its hot its here
Click to expand...
Click to collapse
How does this work ? Does it use the cigarette lighter as the support ?
Sent from my 3vo using XDA.
jamieunit said:
http://www.ebay.co.uk/itm/NEW-CAR-HOLDER-MOUNT-CHARGER-HTC-EVO-3D-/110729003340
I use this, perfect for me
THISIS50.com if its hot its here
Click to expand...
Click to collapse
Pretty cool, I might actually consider this for my car.
Thanks.
bagelicious said:
I use the Seidio dock at work and at home. It doesn't have an audio out that I know of, but it works great with my case (also made by Seidio - I'm not sure if you'll have success with a non-Seidio case). If you don't have a case it will work fine, also.
Not sure about a car dock but I know there are several options out there.
Click to expand...
Click to collapse
As for home, do you have a link for this Seidio dock? I too have a Seidio case and would like a dock that will work with it.
Hopefully this will work ok. Sending from my phone so it might be wonky:
Seidio Desktop Charging Cradle
Edit: Fixed broken link from my phone.
Sent from my Shooter using xda premium
Aersaud said:
How does this work ? Does it use the cigarette lighter as the support ?
Click to expand...
Click to collapse
Sorry bit delayed but yeah it uses the cig lighter for support pretty good, I've got a really stiff head phone jack plugged in so it pulls it a bit and made it a bit loose so rapped some tape round the joint, good for the price.
THISIS50.com if its hot its here
For me the best dock for Evo 3d Is:
http://www.am**on.co.uk/KiDiGi-HDMI...3?s=electronics&ie=UTF8&qid=1327919543&sr=1-3
there is also a Hdmi port!!!
Ins90 said:
For me the best dock for Evo 3d Is:
http://www.am**on.co.uk/KiDiGi-HDMI...3?s=electronics&ie=UTF8&qid=1327919543&sr=1-3
there is also a Hdmi port!!!
Click to expand...
Click to collapse
The link isn't working.
I figured it out, it's:
http://www.amazon.co.uk/KiDiGi-HDMI...3?s=electronics&ie=UTF8&qid=1327919543&sr=1-3
Thanks
Fitting Car Dock in Germany
Hey Guys,
as I am not allowed to post in the Developer Forum yet,
which slowly get's on my nerves (but I get the reasons for it),
I finally found something to post somewhere else that is not completely meaningless.
Does anybody know where to get one of those "good" car mounts in Germany???
I am looking for something like Kidigi Car Mount Cradle CM-HE3D, iGrip perfectFit Vehicle mount or the Seidio one.
I want something with USB pass-through so I just have to put the Evo in.
Even better if the Camera is not obscured.
The Kidigi one is my favorite. Unfortunately the official reseller cjdirect.de seems not to have it yet (i will call them next week).
Only other way for me would be form the US or HongKong which I wouldn't prefer for reasons like tax, delivery time and so on.
I found it on Amazon.fr for 25 Euro but they won't deliver to Germany.
Then I found it in another French shop where they want 41 Euro because of delivery.
The Seido Innotraveler is available on amazon.co.uk für 37 Euro but I don't like the looks so much.
The iGrip I coulnd't finde at all (in Europe).
So if anyone could help me out and suggest something I would really appreciate it. Else, I guess I will call cjdirect and maybe order one from Hong Kong or France.
Nearly forgot, of course i know about the official HTC car kit but I don't like that either, and for 40 Euro I would rather pay 1 Euro more for Kidigi one or go to Hong Kong. Same with the one from Brodit. Just too expensive.
Thanks
I use this one for my HD2 but with a different mounting part. I dont know whether both cameras are uncovered. http://www.ebay.de/itm/KFZ-Halter-H...alterungen&hash=item3f0facce90#ht_2721wt_1113
Dnst said:
I use this one for my HD2 but with a different mounting part. I dont know whether both cameras are uncovered. ...
Click to expand...
Click to collapse
Thank you. Looks good but is not quite what i was hoping for.
I don't want to handle any cables when I want to load my phone in the car.
As I could'nt find anything else either I guess I just order the Kidigi mount through ebay from Hong Kong.
Ok, as I am really interested in a good car kit, too, maybe you could share your experience here when you have received the product. I am currently preferring this one http://www.pdamax.de/Zubehoer/HTC/EVO-3D/Kfz-Kit-CU-S520-Halterung-Ladekabel,hz-620:338.html or I will just buy a new cradle and put it on my existing model but it seems the major problem with most of the kits is the cameras not having free sight.
This is the official dock by HTC and due to the camera being obscured and
the high price I decided against it.
I will report about the KiDiGi dock as soon as I receive it.
It is on it's way already but tracking with DHL doesn't work yet (if at all).
have you look at the iGrip car dock?
Yes, thes iGrip dock would have been my second choice.
It has the best reviews of all but as it didn't matter
to me if I order from HongKong or the US I chose Kidigi
for it's looks and it's price.
I also found some reviews about the Kidigi docks for the Desire (I guess), here in the xda forum.
Were quite good too.
For all who are interested, you maybe want to checkout amazon.co.uk
for the Seidio Evo 3D Innotraveler Car Dock (not allowed to post links yet)
High Price but would have been my third choice, still better than HTC one because Camera should be free.
You need credit card though, same as in France for Kidigi.
Choose wisely
Anyone used both the iGrip and HTC car dock? I'd like to know which seems more solid. The obscured cameras don't really matter to me on the HTC one because there's a 99.99% chance I won't be snapping pics while driving.
As far as desk docks, I found this. OEM FTW.
http://www.amazon.com/dp/B005CK2APQ/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my PG86100 using XDA
You can find articles comparing HTC and igrip docks. HTC seems more solid, less vibrations, according to them.am on my phone, you can find them through Google.
and the camera is not only for taking pictures, which shouldn't be done too frequently , but for example for navigon reality scanner.
how much vibration come purely down to what mounting solution you use, if you choose a low vibration mount or vehicle specific mount any dock can be rock solid, I have the iGrip but I do not use the included suction mount as I hate having it on the windshield, I use a dash friction pad with a different suction mount that allow me to have it sit in between the instructment panel and the GPS LCD on my RDX, if I use it in my Mazda6 I have a Proclip vehicle specific mount (VSM) and that's super rock solid. I don't know about the HTC, but the iGrip Dock use the Herbert Richter (HR) 4 prong mount system so can use any mount that support the HR system or get a adopter plate, that's what I use in my Mazda with the Proclip, screw the plate onto the VSM and off i go, and if my wife want to use a dock on for her iphone its easy to swap also.
Hello everyone I was wondering if anyone had any recommendation for headphone port extender?
I have a UAG and Spigen Neo-Hybrid and it's such a hassle to have to take off the the case in order to use headphones or car's aux port.
I found some on Amazon and was wondering if anyone had any good experience with this.
Here is what I found:
http://www.amazon.com/gp/product/B00HI4QRW6/ref=gno_cart_title_1?ie=UTF8&psc=1&smid=A1I6WPCEFFEP6C
http://www.amazon.com/iPhone-Stereo...69311&sr=8-3&keywords=Headphone+Jack+Extender
http://www.amazon.com/Exclusives®-H...69311&sr=8-8&keywords=Headphone+Jack+Extender
jluu1286 said:
Hello everyone I was wondering if anyone had any recommendation for headphone port extender?
I have a UAG and Spigen Neo-Hybrid and it's such a hassle to have to take off the the case in order to use headphones or car's aux port.
I found some on Amazon and was wondering if anyone had any good experience with this.
Here is what I found:
http://www.amazon.com/gp/product/B00HI4QRW6/ref=gno_cart_title_1?ie=UTF8&psc=1&smid=A1I6WPCEFFEP6C
http://www.amazon.com/iPhone-Stereo...69311&sr=8-3&keywords=Headphone+Jack+Extender
http://www.amazon.com/Exclusives®-H...69311&sr=8-8&keywords=Headphone+Jack+Extender
Click to expand...
Click to collapse
I had the same problem with the same case (and other cases). The jack I was using was too thick, and wouldn't fit in the case hole. I used an adapter for a while with no issues, so I think any of the ones you linked to will work. I ended up just getting a new AUX cable that has a small end, and now just use that, but thanks for the links. I may pick one or two up for safe keeping.
I had the same problem and I solved it by trimming the plastic / rubber around the base of the 3.5mm audio plug. You may not want to do that to an expensive set of headphones but audio patch cables are like $2 so I don't care if they fall apart after a while.
David
jluu1286 said:
Hello everyone I was wondering if anyone had any recommendation for headphone port extender?
I have a UAG and Spigen Neo-Hybrid and it's such a hassle to have to take off the the case in order to use headphones or car's aux port.
I found some on Amazon and was wondering if anyone had any good experience with this.
Here is what I found:
http://www.amazon.com/gp/product/B00HI4QRW6/ref=gno_cart_title_1?ie=UTF8&psc=1&smid=A1I6WPCEFFEP6C
http://www.amazon.com/iPhone-Stereo...69311&sr=8-3&keywords=Headphone+Jack+Extender
http://www.amazon.com/Exclusives®-H...69311&sr=8-8&keywords=Headphone+Jack+Extender
Click to expand...
Click to collapse
http://www.monoprice.com/Search/Index?keyword=3.5MM+EXTENSION