I am an inexperienced user and have a few simple questions. I have a touch dual originally from orange uk. I've done the cid unlock thing and found that fairly easy.
I want to upgrade the system to 6.1 or 6.5. Can i copy the system on the phone already so I can revert back to it if the new version ***** up?
Is it better to put on a more worked out 6.1 rom than the new 6.5 which may have a few glitches since I'm not a great tinkerer or will the 6.5 provide a stable load and forget solution.
Finally which is the best rom out there for stability and features and user friendly.
to revert back, u'll need to fully backup your old wm6 before flashing the new ROM. if u don't like the new ROM, flash back your old ROM and restore from the backup and u're back to square one.
if u want stable, forget about wm6.5. stick to wm6.1.
I'm happy enough backing up my data side of thinggs. How do I back up my operating system or do I have to download a wm 6 operating system in the same way I down load the 6.1 system?
If you search around the forum there is a copy of the OrangeUK ROM on here (singed, with radio) I have it sat on my PC from a while ago.
Infact, I found it:
NetrunnerAT said:
Original Full OEM Roms!
RUU_Nike_HTC_PTG_13141009_Radio_Nike_1581627_signed_Ship
RUU_Nike_HTC_RUS_13141109_Radio_Nike_1581627_signed_Ship
RUU_Nike_HTCASIA_AUS_13171012_Radio_Nike_1582123_signed_Ship
RUU_Nike_HTCASIA_WWE_13170709_Radio_Nike_1581627_signed_Ship
RUU_Nike_ORANGE_UK_1316110_Radio_Nike_1581627_signed_Ship
RUU_Nike_SingTel_WWE_13187114_Radio_Nike_1581627_signed_Ship
THX to all guys, they have shared those Roms with me!
Click to expand...
Click to collapse
Taken from web page: http://forum.xda-developers.com/showthread.php?t=373452&page=1
Post 4
Wez.
that s excellent thank you very much. Can anyone recommend a good 6.1 with all the bells and whistles?
I personally use Salvy.C.83's ROM. Not found any real problems with it and the battery drain is much less than any other Manila 2D ROM out there.
Find it here
Happy flashing
Wez
Thank you for your help so far.
To do it to the hard SPL 1.22 do I need to go through the following routine
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
(OPTIONAL, better to skip it! step 7. if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki)
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
9. after installing the hardspl you can flash any rom
Just subsidising the new hard SPL 1.22 at line 8. Or can I miss out all the sspl part and just go straight in at line 8?
Sorry if I'm coming across as bit of an idiot.
Right routine:
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
(OPTIONAL, better to skip it! step 7. if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki)
8. you can now flash the hardspl-1.22-nike.nbh by running Nike CustomRUU.exe
9. after installing the hardspl you can flash any rom
10. Update your radio at last 1.65.xx (last official here)
Related
I am using CE OS 5.2.20753 Build 20753.1.4.0 PV SB on O2 Atom Exec. I am trying to flash my ROM with any of the provided ROMS in this forums rite from WM5 till Jamies latest ROM.
As a background, I have already configured my mobile in VISTA laptop using the MANUALS & RAR files, provided around a year back.
The problem is as follows:
1. I run the package, which internally unzips all the files in C:\Windows\Temp
2. DSUU starts executes and provides a screen to select OS, OS+Extended ROM, OS+Eboot only, etc....
3. I tried using both ALL, OS only, OS+Extended ROM but i get the error as mentioned below.
4. I get a screen which speaks about all the my current RADIO, ROM version and the TO BE new versions.
5. I select OK / Continue.
6. Program reboots my Atom exec and stucks in "USB CONNECTED" black screen. This continues untill i try to manually terminate the DSUU process.
7. To recover from this, I remove the battery manually and insert and start the phone.
8. Phone starts working from the stage where I started flashing with new ROM.
I am totally confused as i tried a lot of ROMS rite rom Wm5, WM6 & WM6.1 which also includes all the ROMS, which i have already used in the past on the same phone.
Gurus, please suggest the possible wayout, as i am stuck on this ROM for a long time and unable to test all these new wonderful ROMS.
ASH
use win xp not vista in flashing roms...
Use the search function, there is an answer to Your question in some of the forums at xda-developers and it is posible to flash roms from VISTA, but after doing some reinstalation on USB drivers and some tweaking....try to find VISTA ROM UPGRADE
My experience is:
I followed the instructions and they worked 2 times and I have flashed the ROM twice, I dont know what happened to my computer because after that never again make it to work in vista.
I whish You Could!
Thanks
Thanks for the suggestions. I have flashed this mobile around more than 20 times out of which atleast 10 times in Vista.
My problem is, after flashing the current ROM, i am unable to flash on this device. i tried flashing other device from the same laptop and it works
When i start the flashing procedure, mobile enters into Boot mode and then nothing happens. i remove battery and mobile boots up with the same old ROM.
Please helppppppp
ASh
How To
Upgrade to WM6, WM6.1 or WM6.5
I think the old how to is a littlebit old so I'll write a new one and maybe add screenshots later too.
For the old Utility:
(For the new Utility is is described in the second post)
Before starting: Connect your phone to your PC and be sure ActiveSync shows the phone as connected. (It has to have a partnership with the PC you are using!)
1) Download a ROM and extract it to any folder you want to.
2) Open the folder. There are two CAB files inside (EnableRapi.cab and Cert_SPCS.cab)
3) Copy the CABs to your phone and install them.
4) Soft reset.
5) Search and run Upgrade_ROM.bat (doubble click it).
6) Wait untill all is finished. (You will see a message telling you that)
7) Hold Camera and Voice Dial button while resetting. Answer with the green phone button. (Call button).
All ROMs using the old way:
-TouchFlo Charmer WM6 by Vlodeck
-Charmer TouchFLO WM6 German by Ridingshark
-Talking to the active cooks at the moment. Infos soon.
You are finished now. Enjoy your new ROM.
Please tell me what ROM is using what way. I'll add it then.
For the new Utility:
Before starting: Connect your phone to your PC and be sure ActiveSync shows the phone as connected. (It has to have a partnership with the PC you are using!)
1) Download a ROM and extract it to any folder you want to.
2) Open the folder and search for Upgrade_ROM.bat.
3) Run Upgrade_ROM.bat (doubble click it).
4) Read the document. Close it and press any key.
5) Wait until all is finished (The screen will turn green)
6) Hold Camera and Voice Dial button while resetting. Answer with the green phone button. (Call button).
All ROMs using the new way:
-My ROMs links soon.
-Swampys ROMs use a nearly same way. Links soon.
-More ROMs soon too.
Reserved for 3rd part of the how to. Every Utility in a extra post makes it easier to link to it.
Gauys i try to put new ROM and i falow all instructions. But when i make reset there is just start up screen with
IPL 1.12
SPL 4.12.0000
GSM 01.12.20
OS 4.0.0.0
Can someone help me how to turn back all or how to finish these
PS: sorry for my english
just want to share with all of u about my Atom situation and pls don't try it!
When i got my atom, it's running Windows mobile 5 then i upgrade to 6 by jiggs coz can't found 6.1 clean one.
after several days of searching, i found Atom Rom 6.1 from Helloword1 (only diskimg.nb0) then i download pc update from his threat to update. i perform all update, it complete successfully.
i want to try rom from hp witch is recommend from Helloword1 to hp user, i found that the hardware of hp and atom are the same so i want to try that rom even there is warning from other user here.
i also download the atom kitchen of atom, put diskimg.nb0 to ROM directory in the kitchen then run Build Rom.bat when rom is generate i flash it to my atom using pc update from HP. this time i forget to delete Eboot.nb0 for HP so while updating My atom boot loader become HP logo that time i dare not to disconnect it from usb coz m afraid to brick my device, i wait till it finished
after reboot my atom's boot loader become HP and 02 Welcome screen!
i can aligne screen to complete windows setup but every apps not working even sync.
i try to search forum but no solution.
try to flash from SD card as suggest from Helloworld1 still can't
Then i take out the battery and press Send and End button for a while put battery back, it goes to HP boot loader then fasten i connect to pc this time i flash with HP ROM it's finished successfully but i can't even aligne screen but when i plug to my pc, it's connected so i have some hope to flash back to atom using Jiggs ROM
everything working fine now even boot loader
Now i flash back to Helloworld1 (atom rom)
dolphinxda said:
just want to share with all of u about my Atom situation and pls don't try it!
When i got my atom, it's running Windows mobile 5 then i upgrade to 6 by jiggs coz can't found 6.1 clean one.
after several days of searching, i found Atom Rom 6.1 from Helloword1 (only diskimg.nb0) then i download pc update from his threat to update. i perform all update, it complete successfully.
i want to try rom from hp witch is recommend from Helloword1 to hp user, i found that the hardware of hp and atom are the same so i want to try that rom even there is warning from other user here.
i also download the atom kitchen of atom, put diskimg.nb0 to ROM directory in the kitchen then run Build Rom.bat when rom is generate i flash it to my atom using pc update from HP. this time i forget to delete Eboot.nb0 for HP so while updating My atom boot loader become HP logo that time i dare not to disconnect it from usb coz m afraid to brick my device, i wait till it finished
after reboot my atom's boot loader become HP and 02 Welcome screen!
i can aligne screen to complete windows setup but every apps not working even sync.
i try to search forum but no solution.
try to flash from SD card as suggest from Helloworld1 still can't
Then i take out the battery and press Send and End button for a while put battery back, it goes to HP boot loader then fasten i connect to pc this time i flash with HP ROM it's finished successfully but i can't even aligne screen but when i plug to my pc, it's connected so i have some hope to flash back to atom using Jiggs ROM
everything working fine now even boot loader
Now i flash back to Helloworld1 (atom rom)
Click to expand...
Click to collapse
Congratulations! You saved your device from yourself! (I'm joking )
Too much interest history, man...I'm thinking, perhaps, you can SD flash bootloader only (ATOM, of course) for the next (if becomes), starting the HP's bootloader with an ATOM Eboot inside your mini SD. I don't know sure, but perhaps runs ok.
I'm totally agree with you that it's needed more info for people (specially newbies than I'm) about cooking tasks, procedures, kitchens for HP's 68xx.
Not only for customizing pourpouses, also for translations issues. Seems a lot of people are interested in to use some roms in their own language also, not only english.
If this becomes, I guess a bit more projection & bussiness for people that hardly develope these nice roms.
zen_usuario said:
Congratulations! You saved your device from yourself! (I'm joking )
Too much interest history, man...I'm thinking, perhaps, you can SD flash bootloader only (ATOM, of course) for the next (if becomes), starting the HP's bootloader with an ATOM Eboot inside your mini SD. I don't know sure, but perhaps runs ok.
I'm totally agree with you that it's needed more info for people (specially newbies than I'm) about cooking tasks, procedures, kitchens for HP's 68xx.
Not only for customizing pourpouses, also for translations issues. Seems a lot of people are interested in to use some roms in their own language also, not only english.
If this becomes, I guess a bit more projection & bussiness for people that hardly develope these nice roms.
Click to expand...
Click to collapse
Thanks for ur commend man! i also tried to flash Eboot.nb0 fro SD card on that time, after place Eboot.nb0 on sd card, Enter boot loader by taking out battery Press Send + End button for a while, put battery back.
it show HP boot loader around 5 to 10 minutes, restart, every the same.
please Sir dolphinXDA
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
dolphin XDA pls help sir
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
playvoice_17 said:
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
Click to expand...
Click to collapse
Sorry guy m not a cooker, m a user like u too. what i wrote above just a sharing with u guys. it's a mistake coz i want to use rom that is stable for HP.
I have tested all 6.5 ROM from PDAViet but bluetooth and wireless not working well, on the other hand rom from PDA Viet not a clean one.
Now day i still using 6.1 from Helloworld1, may i recommend you to use 6.1 by Helloworld1 till we can found 6.5 clean ROM like Helloworld1?
I have a tmous HD 2 that orinally had windows os on it. I have since tried to flash a new rom. When I originally started this process I was dual booting. The phone would start out in windows mobile 6.5 with no update and I had to phisically launch the Android rom. After this I started playing around in order to get phone to boot in android only. The SPL I have is 2.08 HSPL I was getting stuck at the t-mobile stick together screen and then I tried bootloader mode and I was able to launch boot loader mode but wont let me do anything. Originally the rom was in an unziped format and thats how i was dual booting. Then i tried the ziped format and this is where my phone has went bonkers and won't do anything, by that i mean it wont turn on in either mode regualr or boot load. tried to connect to computer and computer dosent regonize it. has anyone ran across this? and if so can you please help me out? i am a little tech savvay but not great at it. any help would be greatly apricceated. Also when i had android running on phone it was supprisingly fast and worked flawlessly!
From a previous thread here on xda.
Q; How to install cooked Rom (using Task 29)
My Install Strategy;
· Run Microsoft My Phone Sync
· Turn off antivirus software in Desktop PC (Stop Avast Anti-Virus)
· Remove SIM and microSDHC Storage Card
· RUN XDA Developers “HD2 Task 29” as an Administrator
Task 29 is not mandatory that's true, but it's a safe way to ensure that you don't have any old files remaining after flashing a new rom.
There is no harm in doing it and the easy way is to use the tool I provided in this post:
Connect your device and flash as you do with an ordinary rom, when completed (100%) press volume down and keep I pressed until the device has restarted showing the coloured boot screen, then you flash the Rom.
· Install your cooked Rom as an Administrator
NOTE 6: Please, Hard-Reset after flash process has completed.
· Add SIM and microSDHC Storage Card
· Set Time and DATE
NOTE 7: Please, Restart the phone, after first manila screen.
· Run Desktop pc FULL ActiveSync, select setup device.
I have done this but phone wont boot up in order to do a hard reset like mentioned!
Q; I downloaded and extracted the zip file from a cooked Rom, and noticed there was no ruu file attached. What to do?
You can download the SSPL_RUU, here. place the SSPL_RUU file into the map where you unzipped your cooked Rom and lounge to start.
I have done this.
What more do I need to do in order to get my phone back up and running?
Thank you in advance for help and support
Hello,
I am using Windows 7 OS on a Dell Laptop.
I am trying to Flash and replace the Rom on a Toshiba TG01 using, I understand the method needed, but I cant get TG Downloader to recognize my phone. TGtools dosent run at all. (Boots for 3 seconds then turns off) Would someone be able to direct me to some information that would help me run the applications on Windows 7. I checked every threads and cant find any reference.
Thank you
Spiden2099 said:
Hello,
I am using Windows 7 OS on a Dell Laptop.
I am trying to Flash and replace the Rom on a Toshiba TG01 using, I understand the method needed, but I cant get TG Downloader to recognize my phone. TGtools dosent run at all. (Boots for 3 seconds then turns off) Would someone be able to direct me to some information that would help me run the applications on Windows 7. I checked every threads and cant find any reference.
Thank you
Click to expand...
Click to collapse
power off then press and and hold cam button + power= you must get a white LED. If not, you has not a 6.5 Rom with 0321 Radio and you not able to recognize by tg downloader. pls try and post your feedback
Thank you for the suggestion...
But when i follow those instructions, the following things happen:
1. The screen blinks,
2. The Brand Logo Screen stays for a about 2 min.
3. Windows 6.5 loads normally...
I guess I have the wrong Rom, and only the SD card method would work.
Spiden2099 said:
Thank you for the suggestion...
But when i follow those instructions, the following things happen:
1. The screen blinks,
2. The Brand Logo Screen stays for a about 2 min.
3. Windows 6.5 loads normally...
I guess I have the wrong Rom, and only the SD card method would work.
Click to expand...
Click to collapse
wron ROM 100% you need firs flash standard wm6.5 this: miRom 7 radio 0321 as .tsw (if is not rename it to tg01wp_00.tsw)