I'm just wondering, do I need to get my phone sim lock to be able upgrade my phone to Windows Mobile 6.5 kitchen or update new ROM from this website.
Could someone please help me out on this, cause I'm really really confuse
panzerxschreck23 said:
I'm just wondering, do I need to get my phone sim lock to be able upgrade my phone to Windows Mobile 6.5 kitchen or update new ROM from this website.
Could someone please help me out on this, cause I'm really really confuse
Click to expand...
Click to collapse
NO. You just need to flash hardspl onto your device before flashing a cooked ROM. Just follow the instructions in this thread: http://forum.xda-developers.com/showthread.php?t=448008
ok, so is this what they call CID Unlock?
my other question, what is Radio?
panzerxschreck23 said:
ok, so is this what they call CID Unlock?
my other question, what is Radio?
Click to expand...
Click to collapse
go to blownfuze.org and Doug's got all the noob stuff laid out
thank you. i need that.
currently i just upgrade to WM6.5 THXS Guys and XDA awesome people
Hi and welcome,
Please don't start a new thread, there is a "For n00bs" thread already, please use that.
Thanks
Dave
Related
I've seen many people post his Bootloader are 1.01, 1.02, and 1.03
Someone could explain to me what is the different? And what is the advantage of the higher version?
I found a problem on my Xda II. It couldn't go back to the Original Asia ROM 1.60.00WWE. Althought i have cooked it! I Thought the problem came from the version of Bootloader.
Someone.... Plizz Help me to change my Bootloader version. Thanks!
for 1.01, 1.02, 1.03 I know how to make sdcards to flash the rom,
for the 1.06 version I have not yet found out how the sdcard update mechanism works.
unfortunately I also do not yet know how to downgrade the bootloader.
itsme said:
for 1.01, 1.02, 1.03 I know how to make sdcards to flash the rom,
for the 1.06 version I have not yet found out how the sdcard update mechanism works.
unfortunately I also do not yet know how to downgrade the bootloader.
Click to expand...
Click to collapse
Ok, then how to make SDCard to flash the ROM? Because when we get in to Bootloader, all buttons didn't response.
BTW, mine using 1.02 Version. But it's give me country ID error message when i wanna flash to 1.60.00 COOKED.
You don't know how to downgrade the Bootloader version, how about to upgrade?
1 more question. You tell me you can flash ROM by SD Card method. If i doing that, is nk.nbf and ms.nbf will be upgrade?
Thanks a lot!
Sorry for my BAD ENGLISH
use sdtool.pl http://wiki.xda-developers.com/wiki/RomTools/sdtool.pl
it is a very unpolished tool, not meant for use by people who don't understand what they are doing.
itsme said:
use sdtool.pl http://wiki.xda-developers.com/wiki/RomTools/sdtool.pl
it is a very unpolished tool, not meant for use by people who don't understand what they are doing.
Click to expand...
Click to collapse
Ok. Frankly speaking, i'm not the expert. :lol: So plis give your advice. Maybe short tutorial?
I thought SD Tool software use only for flash the ROM. How about the Bootloader? I really need to change my Bootloader. Plizzz....
Thanks a lot !
itsme said:
use sdtool.pl http://wiki.xda-developers.com/wiki/RomTools/sdtool.pl
it is a very unpolished tool, not meant for use by people who don't understand what they are doing.
Click to expand...
Click to collapse
Ok. Frankly speaking, i'm not the expert. :lol: So plis give your advice. Maybe short tutorial?
I thought SD Tool software use only for flash the ROM. How about the Bootloader? I really need to change my Bootloader. Plizzz....
Thanks a lot !
itsme said:
use sdtool.pl http://wiki.xda-developers.com/wiki/RomTools/sdtool.pl
it is a very unpolished tool, not meant for use by people who don't understand what they are doing.
Click to expand...
Click to collapse
itsme... HELP!! How do i use these FILES?? With what and from where?? I only have USB craddle, mtty software, and SD Card reader.
PLEASE...
Hello... itsme??
http://xda-developers.com/~itsme/download/itsutils.zip
here they are
Hello Rudegar,
And can u guide me to use these files? Can i use USB cable? :wink:
Anyone??
Anyone??
i could use my usb cable
all the instructions i used were from
http://wiki.xda-developers.com/wiki/RomTools
Thanks for the reply Rudegar. Your responses did give some hint, but for beginners (like myself) that have limited experience with these opeartions do find the info helpful but not solving the problem.
My understanding is we first need to follow the steps in http://wiki.xda-developers.com/index.php?pagename=RomTools/sdtool.pl, and put the ROM back to the device by doing a s2d. Am I correct? So will running the script sdtool.pl unlock the bootloader? Or we have to pass in some specific parameters?
Any info will be helpful! I love experts posting their knowledge and help new comers as this is how a strong user community can be built!
-eldon
hi i meda a big problem on my Athena x7500 iam not CID opend it is loukt and i have run'd the tool to go to spl 3.5 and didnt flsh it i rest my Athena and it stopt runing i a get to boot lood it gives me spl 1.10 .0000
and it will not flsh any thing what shud i do if this is the problem is thare any beck up of the originel HTC room i mine the 1 that comes with my PDA like WM 6.0 so i can come beck to live and do the flsh agin of WM 6.1
with the CID opend ?
lidan25 said:
hi i meda a big problem on my Athena x7500 iam not CID opend it is loukt and i have run'd the tool to go to spl 3.5 and didnt flsh it i rest my Athena and it stopt runing i a get to boot lood it gives me spl 1.10 .0000
and it will not flsh any thing what shud i do if this is the problem is thare any beck up of the originel HTC room i mine the 1 that comes with my PDA like WM 6.0 so i can come beck to live and do the flsh agin of WM 6.1
with the CID opend ?
Click to expand...
Click to collapse
Dude!!!
Did you not read anything anyone has told you??? Read the F***ing Instructions PLEASE!! Its Simple. You still have bootloader so flash with AP 3.0 and start again. If you dont know what you are doing then stop messing until you do.
responderman said:
Dude!!!
Did you not read anything anyone has told you??? Read the F***ing Instructions PLEASE!! Its Simple. You still have bootloader so flash with AP 3.0 and start again. If you dont know what you are doing then stop messing until you do.
Click to expand...
Click to collapse
sand me a link for AP 3.0
thanks
agin
it didnt work it Flsh like 1% and Rest !!
on Ap 3
lidan25 said:
it didnt work it Flsh like 1% and Rest !!
on Ap 3
Click to expand...
Click to collapse
thats because u did not hard spl your device. u need at least 1.2 olipro as your version for spl before loading any rom
irus said:
thats because u did not hard spl your device. u need at least 1.2 olipro as your version for spl before loading any rom
Click to expand...
Click to collapse
so is there any way to get out of this problem? help me if you can thanks
how do i get 1.2 olipro ??
how do i hard spl my device ?
if i can only get to boot lood ?
flash back to your original ROM first.
Then unlock to spl1.2.
Then flash to AP 3.
eaglesteve said:
flash back to your original ROM first.
Then unlock to spl1.2.
Then flash to AP 3.
Click to expand...
Click to collapse
is there any way i can know what i had i had i only know it was Htc ROM WM 6.0
any way to get this Rom ?
lidan25 said:
is there any way i can know what i had i had i only know it was Htc ROM WM 6.0
any way to get this Rom ?
Click to expand...
Click to collapse
I usually download from htc club site. You need to be registered first.
If not, get it from the upgrade thread if you know which variant you're using. There are many version of stock ROM and you must use the correct one.
eaglesteve said:
I usually download from htc club site. You need to be registered first.
If not, get it from the upgrade thread if you know which variant you're using. There are many version of stock ROM and you must use the correct one.
Click to expand...
Click to collapse
can you sand me a link so i can get any and test 1 at atime so if it will work i will get it beck working !!
can you?
lidan25 said:
can you sand me a link so i can get any and test 1 at atime so if it will work i will get it beck working !!
can you?
Click to expand...
Click to collapse
I answered you in another Thread , you really should not be cross posting.
Here is the link but read my other answer
http://wiki.xda-developers.com/index.php?pagename=Athena_Upgrades
thanks
lakeman said:
I answered you in another Thread , you really should not be cross posting.
Here is the link but read my other answer
http://wiki.xda-developers.com/index.php?pagename=Athena_Upgrades
Click to expand...
Click to collapse
thanks man
wall i hope this helps
ok it did work thanks for all of you hare i think i will be ok for now !!
irus said:
thats because u did not hard spl your device. u need at least 1.2 olipro as your version for spl before loading any rom
Click to expand...
Click to collapse
Irus,
Ive been telling this guy on another thread to read up on all this before jumping in but he went and did it anyway. you cant help them that wont help themselves. he is trying to use SPL 3.5 on his athema so I gave him the link to AP 4.0 and told him to read up on everything first!
regards
Jay
responderman said:
Irus,
Ive been telling this guy on another thread to read up on all this before jumping in but he went and did it anyway. you cant help them that wont help themselves. he is trying to use SPL 3.5 on his athema so I gave him the link to AP 4.0 and told him to read up on everything first!
regards
Jay
Click to expand...
Click to collapse
hi thare the only problem i have is the wifi on AP 4.0
so now it is not a big thing now what do i need to do ??
responderman
i know you dont like me but now all is ok the wifi is not !!
The messing with the wrong SPL and Bootloader has killed your WiFi.
If you have a note of your WiFi's original MAC address, then one of the developers may be able to help you. You can only hope one of them is watching this thread
lidan25 you are annoying people
lidan25 said:
hi thare the only problem i have is the wifi on AP 4.0
so now it is not a big thing now what do i need to do ??
responderman
i know you dont like me but now all is ok the wifi is not !!
Click to expand...
Click to collapse
lidan25 you are annoying people who have given you good advice.
read the wiki http://forum.xda-developers.com/newreply.php?do=newreply&p=2238472
especially this part http://wiki.xda-developers.com/index.php?pagename=HTC_Athena_AP4_FAQ
which talks about your problem
go away and learn about the problems you have created by not taking the good advice already given
lidan25 said:
hi thare the only problem i have is the wifi on AP 4.0
so now it is not a big thing now what do i need to do ??
responderman
i know you dont like me but now all is ok the wifi is not !!
Click to expand...
Click to collapse
The only thing i'm pissed about is I was telling you from the very start to read up first so you dont screw up your device. the instructions are crystal clear and if you follow them all would be well now. you have done what people were trying to tell you not to. However if you READ the WM6 pages there is a post telling you how to get WiFi back, its quite easy but you need other help. you may as well put the rom you want on first and then set up WiFi again. Its nothing to do with not liking you!!
responderman said:
The only thing i'm pissed about is I was telling you from the very start to read up first so you dont screw up your device. the instructions are crystal clear and if you follow them all would be well now. you have done what people were trying to tell you not to. However if you READ the WM6 pages there is a post telling you how to get WiFi back, its quite easy but you need other help. you may as well put the rom you want on first and then set up WiFi again. Its nothing to do with not liking you!!
Click to expand...
Click to collapse
ok i am sorry but now i am reding all the things i need to do bay using the Mac1EXE
and the matty.EXE
but the MAC address i dont have so from what can i get it ?? so i can tape it on the tool i have got form the link !! you give me !!
i know thare is some info on this link but not how to find mac add !! of my PDA For Wifi !!!the
http://wiki.xda-developers.com/index...Athena_AP4_FAQ
I have a stock Leo 1024 with spl 2.10 can i just hook up my phone using the windows mobile center and run the the CustomRUU.exe. Or do i need to flash my phone to hspl 1.42 in order for the flash to be successful. I have read the topics and honestly i am still confused. I guess cause i am reading alot of scenarios which in the end makes me more confused than when i first started reading. Cause i was reading in one thread that i dont need to flash to another hspl if i wanna keep my waranty and stuff like that. any help is greatly apprecieated
use hspl3 - choose 2.08.hspl
thanx...much appreciated. i just used hspl3 and it worked like a charm. do u know what radio works best for miri & dinik rom or is it pretty much based on your own personal phone?
frequency1 said:
or is it pretty much based on your own personal phone?
Click to expand...
Click to collapse
yep, the rom thread will recommend which radio to use, but its personal preference.
Please Help
Hi
This Is My First Post, i Was Just Wondering, I've Already Installed a custom Rom On My Hd2, But i Want To Install Another One.
Ive tried It And Enerytime It gets Stuck On The Installation page At 0%
Any Advice or Help Would Definitely Be Appreciated
Btw Its HD2 Uk
Thanks
Nukklez said:
Hi
This Is My First Post, i Was Just Wondering, I've Already Installed a custom Rom On My Hd2, But i Want To Install Another One.
Ive tried It And Enerytime It gets Stuck On The Installation page At 0%
Any Advice or Help Would Definitely Be Appreciated
Btw Its HD2 Uk
Thanks
Click to expand...
Click to collapse
first dont hijack peoples threads but hey ho lol
presuming you have a version of hspl on youre hd2, try taskk 29 or mtty before you flash should help, are you going through usb or sd card?
thank u very much for the help. at first i was kinda scared to exploit my phone...lol but now i have changed to a different rom 2 times without any worries .
Hi folks! I just wanted to know if there is a way to flash my stock rom to the device. I am running the Dynamic custom rom by ultrashot and mye phone crashes etc., therefore I want to flash my phone back to the original firmware, radio and so.
Can somebody help me? Make a guide?
Hope for a positive answer
Cheers,
Tabbii
http://forum.xda-developers.com/showthread.php?t=1334468
Lots of useful stuff on ere if you look for it.
" Today 06:36 PM
AndyFZ1S http://forum.xda-developers.com/show....php?t=1334468
Lots of useful stuff on ere if you look for it. "
I know mate =) It is just that I don't understand a thing. I have been searching and searching for ages, but I can't seem to find a guide/way. Tried out many different things. It would be alot easier if somebody who knew about flashing stock rom would post a thread/guide =)
Cheers,
Tabbii
Its very simple - download original ROM, connect phone to PC and flash it, i dont understand whats the problem on it...
Maybe you should tell us a bit more about ur phone- att vs euro version, if its att did u debrand to euro version or flashed to dft spl2.05 straight away, what methods have u tried that didn't work?
Sent from my Titan Dynamic7 v1.21 using XDA Windows Phone 7 App
Petulinek said:
Its very simple - download original ROM, connect phone to PC and flash it, i dont understand whats the problem on it...
Click to expand...
Click to collapse
Okay bud, let's say that you make a guide for me. Find the original stock rom for me, tell me how to flash and problem resolved. You in?
Tabbii said:
Okay bud, let's say that you make a guide for me. Find the original stock rom for me, tell me how to flash and problem resolved. You in?
Click to expand...
Click to collapse
Good joke man
Everything you need is in this thread: http://forum.xda-developers.com/showthread.php?t=1334468
Pls next time use Search before posting.
but what does "RUU" stand for?
Not that easy...
Petulinek said:
Good joke man
Everything you need is in this thread: http://forum.xda-developers.com/showthread.php?t=1334468
Pls next time use Search before posting.
Click to expand...
Click to collapse
Believe me, buddy, I searched alot before posting this. I just can't seem to find a way to install the stock OSPL back again. Now I am running HSPL by DFT. I want to install the old OSPL again so that I can have the stock rom(original). I have searched everywhere, but there is no post regarding the stock OSPL. Yes, the program for installing HSPL by DFT has this choice where u can choose downloading the HSPL or the OSPL. I have tried many times to install the OSPL, but I get an error. Besides, I don't know the right structure of this whole process; Am I going to install the stock radio first or install the OSPL first? And what about the Stock Rom, when do I flash That?
RUU stands for RomUpdateUtility =)
hello bud,
pay no attention to the "know it alls" who post just to post, without actually answering your question. Thats what the forums are for, developement and questions no?
But as an attempt to be helpful, what type of device do you have?
Have you tried just flashing the stock rom found on Football's rom thread?
If not try that using a "RUU" because from what DFT's HSPL page says you should overwrite their hspl if you reflash the original Rom for your device.
IronMan1289 said:
hello bud,
pay no attention to the "know it alls" who post just to post, without actually answering your question. Thats what the forums are for, developement and questions no?
But as an attempt to be helpful, what type of device do you have?
Have you tried just flashing the stock rom found on Football's rom thread?
If not try that using a "RUU" because from what DFT's HSPL page says you should overwrite their hspl if you reflash the original Rom for your device.
Click to expand...
Click to collapse
I have an HTC TITAN(EURO VERSION I THINK). I do have installed ultrashot's rom(dynamic's.......) i don't know what to flash first. What AM I flashing first?
where do i get that RUU? and what AM i overwriting with? I AM getting so confused :-\
You just look in the development thread and download any RUU, like ansar's for example. Then download the stock "euro" rom from football's filefactory. Then you simply put the rom In the same folder as the ruu, run it and follo the instructions! Good luck.
Iron Man
Sent from my PI39100 using XDA Windows Phone 7 App
IronMan1289 said:
You just look in the development thread and download any RUU, like ansar's for example. Then download the stock "euro" rom from football's filefactory. Then you simply put the rom In the same folder as the ruu, run it and follo the instructions! Good luck.
Iron Man
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
could anyone give a tutorial for this¿?
doubler.es said:
could anyone give a tutorial for this¿?
Click to expand...
Click to collapse
What exactly are you trying to do?
hi there yesterday i sucsessfully installed the dynamic v2.0 rom on my HTC mozart after doing the following
Downgraded Rom - RUU_Mozart_Orange_UK_1.24.061.35
Installed DFT HSPL RSPL WP7F3 - http://forum.xda-developers.com/showthread.php?p=16189671#post16189671
Then i installed Dynamics v2.0 - http://forum.xda-developers.com/showthread.php?t=1520352
Basically now my question is about XAP program things
i have read that i need my phone to be developer unlocked to be able to do this
so first question - with following my steps i have done above, is my phone unlocked or do i need to do the chevron thing aswell, if someone can let me know of this greatly appreciated
then my next question to be is how do i deploy the XAP files onto my phone and make it work eg:
i found this that i would like on my phone looks like a very nice feature its a screen capture XAP file
http://forum.xda-developers.com/showthread.php?t=1316199
if anyone has any information on this matter i would be greatly appreciative
im a complete noob with this stuff but am trying to learn as there are many cool things that i never knew could be done with a windows phone lol
thx in advance people and all of u keep up the great work
best regards
steve
No worries sorted it lol
if you use Dynamics you can install any Xap files whenever you want because Dynamics is Full Unlock
Cheers mate yeah didnt realise that lol im new to all this hehe after my phone got fked and using this website has got it back up and running
how did you do it
beany2009 said:
Cheers mate yeah didnt realise that lol im new to all this hehe after my phone got fked and using this website has got it back up and running
Click to expand...
Click to collapse
Hi, Being a newbe myself, wondering if you could advice me please?
On the dynamics rom page http://forum.xda-developers.com/showthread.php?t=1520352 it says to install hard-spl but once I go to that link, it says its for 2nd Gen but I thought that Mozart was 1st gen?? did you use a 1st gen spl? also you said you downgraded, I have 7.5 not a custom rom but on orange, did you downgrade that??. not to sound like a total noob lol what was your experience and process? think it would be good for a lot of people not just noobs like me..Thanks
yeah dont worry bout the gen thingy seemed to work np for me here is my post from another thread follow these instructions and u will be fine, let me know how it goes
im going to open a new topic coz the amount of people ive helped i think it is needed
http://forum.xda-developers.com/showthread.php?t=2200702
XAP installation
squallvai said:
if you use Dynamics you can install any Xap files whenever you want because Dynamics is Full Unlock
Click to expand...
Click to collapse
where can i find the thread for me to install Dynamics? thanks in advance po
ohj_17 said:
where can i find the thread for me to install Dynamics? thanks in advance po
Click to expand...
Click to collapse
If you already have ROM with Full Unlock, then just install [APP] XAP Deployer [on-device] by Ultrashot