I have a bell cdma touch pro which I use spb mobile 3 as my shell
now I have exchange setup at my dealership for emails and get litterly close to 100 everyday, yet no sounds when they arrive/pushed to my phone. I cannot for the life of me find anything in any of the settings in either windows or mobile shell to setup an alert or notification.
Can anyone help me?
start > settings > sounds & notifications > notifications tab > select your event & set the sound you prefer. GL
Already done that, still no sounds, only notification I get is the circular light at the bottom flashes
decoder30 said:
I have a bell cdma touch pro which I use spb mobile 3 as my shell
now I have exchange setup at my dealership for emails and get litterly close to 100 everyday, yet no sounds when they arrive/pushed to my phone. I cannot for the life of me find anything in any of the settings in either windows or mobile shell to setup an alert or notification.
Can anyone help me?
Click to expand...
Click to collapse
Same here.
When I got my 1st touch pro it worked for 3 days then stopeed. I though it was a defect of the phone so i did doa and the new one does the same. I checked in my exchange settings and their is no place for notification.
In my settings the light flashing option is greyed out and i set it to vibe, ring and show message on screen but it only flashes the light!!!!
Good, I am glad I am not the only one.
Would this be the setting for "new mail" or "active sync begin sync or end sync" ?
Either way i have setup sounds for all of them
Can anyone help?
Guys... the problem is with the ROM... You need to update it... Bell offers an OTA. To activate it... go start, settings, today and put back BELLUI and remove TOUCHFLO (I know that sucks...but its temporary). Once you've done that soft reset the phone and wait a few seconds. There will be a white screen poping up saying "UPGRADE IN PROGRESS" this will automatically update all sounds notifications (for email and text messages) . Once the update is done you can remove BELLUI and put back the TouchFLO or SPB or whatever your using
Anyway to force the update?
Yup no update for me
Once you change to BellUI... let it sit for a minute... it will start by itself... if it doesnt, then turn off the device and turn it back on and wait about a minute. Make sure you have the factory Bell ROM installed... this doesnt work with custom ROM's
Hey guys... if the update still doesnt work. Try this cab file...
This definately works
Had the same problem and i tried the TF3d and the regular wm setup because the HTC rep told me it was a known problem with the bell UI.
One day I decided to do the opposite and put back the Bell UI and after 5 to 10 minutes it prompt me for an update.
Tried the TF3d and i now get the soud and vibrate notification with my emails.
WIndeXqc said:
Had the same problem and i tried the TF3d and the regular wm setup because the HTC rep told me it was a known problem with the bell UI.
One day I decided to do the opposite and put back the Bell UI and after 5 to 10 minutes it prompt me for an update.
Tried the TF3d and i now get the soud and vibrate notification with my emails.
Click to expand...
Click to collapse
Thank god for those HTC reps !!!
Related
I noticed a weird, repeatable crash I'm getting today and I'm curious if anyone else is experiencing it:
Settings>Sounds and Notifications>Notifications tab
Settings as:
Event: Phone: Incoming Call
Ring type: Vibrate and ring
Ring tone: Ring-OldPhone2
When I test the settings, everything works fine, but when I hit OK to leave the page, the Event box goes blank, and it kicks me out to an error message that there's been a shell32.exe crash. (It keeps whatever settings I make, though.)
Whether I pick send or don't send, a new screen then comes up and thanks me for sending the error data. Then, it goes out to a splash screen that shows the phone as locked. I have to hit the lock button to get back to my Today screen.
I can repeat this pretty consistently on my Verizon TP.
kal
Get that alot when Im running opera and it opens up a pgae slowly. What causes this?
mrbonner said:
Get that alot when Im running opera and it opens up a pgae slowly. What causes this?
Click to expand...
Click to collapse
No idea. I've had about 10 Windows Mobiles/Pocket PCs, and I've never had it happen before.
Confirm
I confirm the bug, and its really bugging me! I have to turn off the device completely because some application won't work right.
Please, help!!
i get this error with the TF3D at times and have to restart TF3D
I have had this happen a couple of times too, both times I was previewing ringtones.
I had that problem when I first got my phone I went crazy and used Adv Config to change nearly everything there was, shortly afterwards I got a shell32.exe error and a gwes.exe error. I finally did a hard reset and tweaked more carefully and since then haven't had any problems.
I have a sprint HTC TP that i have modded with numerous different WM 6.5 ROM's. After the flash is complete i usually sync the phone with the exchange server at my office to get my contacts, email, etc. The exchange server forces me to use a simple password to lock my phone after 15 minutes so in the event its stolen after 10 failed attempts at entering the password it will wipe the phone. WM 6.5 automatically enables the slide lock so when my phone is off for a period of time it locks via the windows slide lock and the exchange simple lock. every few days when i turn on my phone i get a message that the device will be erased after the next unsuccessful logon attempt also the swipe lock button says slideslide and doesnt work. I have to perform a soft reset and when the phone boots back up it erases everything including my SD card. Any help would be appreciated. I have tried Juicy 7, db and a few others but i dont have their names. They all produce the same errors. Im trying not synching my exchange account to see if the simple password is the culprit. Any help would be appreciated.
http://forum.xda-developers.com/showthread.php?t=509544
I use this rom and it doesn't SLIDE lock when i turn the screen off... It goes right back to the home screen.... So it might help you.
Its funny you mention that ROM because thats the exact one im currently using and on my phone it does automatically use the slide lock.
The lock feature in WM6.5 has been an issue since the start. I have seen a few roms in BA and Fuze that work rather well with it (including with the exchange server), but I have seen a crap-load of reports from people with similar issues to yours. I don't know how far advanced the 6.5 development is for the Herman, but if I were you I would probably stick to Mighty 4 Reborn, Fallen 2.1, or some other 6.1 rom. Stay away from 6.5 if you must use the rom for heavy, work-related, daily use.
Also, take out the SD card before SR if you see that the phone is telling you that it will format your storage. Good luck!
Thanks egzthunder1 i think thats what ill have to do.
JSYK i did some additional testing and the culprit appears to be active sync. I set up the lock using a simple password and had no problems. Then i added gmail account with lock and also had no problems. I connected to exchange server with direct push and the problem started re-occuring.
same issue
irishpaul3 said:
I have a sprint HTC TP that i have modded with numerous different WM 6.5 ROM's. After the flash is complete i usually sync the phone with the exchange server at my office to get my contacts, email, etc. The exchange server forces me to use a simple password to lock my phone after 15 minutes so in the event its stolen after 10 failed attempts at entering the password it will wipe the phone. WM 6.5 automatically enables the slide lock so when my phone is off for a period of time it locks via the windows slide lock and the exchange simple lock. every few days when i turn on my phone i get a message that the device will be erased after the next unsuccessful logon attempt also the swipe lock button says slideslide and doesnt work. I have to perform a soft reset and when the phone boots back up it erases everything including my SD card. Any help would be appreciated. I have tried Juicy 7, db and a few others but i dont have their names. They all produce the same errors. Im trying not synching my exchange account to see if the simple password is the culprit. Any help would be appreciated.
Click to expand...
Click to collapse
I got exactly same issue you had. My phone is from Bell and had no problem with mighty 4.16 and original ROM. It just happen on Mighty 5 and doesn't matter which build. the latest one I tried was 21234.
Another thing I figured out was it happen on every Monday night around 8:00PM to 10:00PM. If anyone know how to fix or solution. that will be appreciated.
This happens very often
Hi,
this is phone independent issue,
I've already opened thread for it - till now no solution:
http://forum.xda-developers.com/showthread.php?t=515102
Ok i have a alltel touch pro, stock rom the only thing i have changed was the theme. i have diamond tweak and tf3d config and advance config tool all installed. For some reason I will pull my phone out of my pocket turn the screen on and the data will be on. I have weather, gps, and all other options that use data turned off unless i tell it to turn on. (or so i think)
Is there anything you guys know of that would be a reason for my data to be coming on automatically. it is killing my battery and it is becoming annoying to after having my screen off for an hour or so (sometimes more) to pull it out and the data be on for no reason.
any help please?
thanks
Jeff
I also had the same problem. My phone did the exactly same thing, but since I have a notification on my phone on when this would occur it I would press and hold the end key to terminate the data.
What I did to get rid of it was first backed up all of contacts, sms, etc..
and did a hard reset.
Got rid of all of the extras I had installed.
And reinstalled only the things that I needed.
for example net.3.5 tf3d config, personalizer.
If you don't have a back up program (make sure you have a sim card as when you back up you'll be backing it up into your sim) use PPCPimBackup.exe which you could find through google.
I'm still a noob to ppcs and my touch pro, but if you have any questions on how to do the following just let me know.
If you download advanced config tool you can set the data connection to turn off automatically. There are also a ton of other options that will help optimize your phone and save battery
Do you have an E-mail account set up on your device? If so, you may have set it to connect every so often. One other thing that comes to mind would be if the QuickGPS app needs to update the certificates, it will connect to the internet.
You may want to get a custom rom in your device. This will get rid of a lot of junk...
Good luck!
Hi Guys,
Somehow I seem to have turned on a feature which reads out the number of the person sending me a text message. This happens when my phone is on silent too. Which is begining to annoy me, especially when I am at work. Have had a look through settings for SMS but can't see the option to turn it on or disable it. Does anyone know how I can switch it off?
Thanks.
Jigzuk said:
Hi Guys,
Somehow I seem to have turned on a feature which reads out the number of the person sending me a text message. This happens when my phone is on silent too. Which is begining to annoy me, especially when I am at work. Have had a look through settings for SMS but can't see the option to turn it on or disable it. Does anyone know how I can switch it off?
Thanks.
Click to expand...
Click to collapse
I have not seen any Settings like this in my Mobile for now.If you are sure you changed some settings and than it started reading out numbers use factory default settings it might Help but before doing that wait for some time some other members might know how to stop it.If you have not Received any answer about this than use factory default settings.
The thing is I don't remember changing any settings for this at all. It's not something I wanted to have switched on. I'm reluctant to do a factory reset as I have my phone setup just perfectly at the moment.
Hit the home button twice to get the voice launcher up, turn off "driving mode"
Job done.
Thanks for that. Although I managed to resolve it another way. Went into Settings - voice input and output and de-selected Driving mode.
Your way is a lot quicker though. One for the books.
No worries, took me 48 hours to figure it out for myself the first time.
Hi,
A few days ago, I updated my HTC Titan (bought in 2011 in France as a sim-unlocked device) to the official Tango update (+ firmware update) through Zune.
Then, after doing a hard reset, the usual setup assistant is displayed, but at the end of it there is a new step that wasn't there before the update (titled "Almost Done") telling me that the phone is going to launch some kind of htc specific utility in order to configure my data connection for my carrier. Then after clicking on "continue", I see a black screen for about 15 seconds (like when an app doesn't manage to load properly and WP7 kills it because it took too long to start), then the start screen appears (but I don't receive the usual fake welcome SMS from Windows Phone).
I can launch apps, but the capacitive Back button, Start button, Search button don't react (they cause the phone to vibrate, but WP doesn't react to these commands).
After shutting down the phone and restarting it, I'm greeted by the setup recovering screen (titled "Welcome Back") telling me that Windows Phone will resume my setup where I left it (that explains why the capacitive buttons don't react: they were software disabled because Windows Phone considered it was still in first setup mode. Same for the fake welcome sms I didn't receive). Of course the same problem happens again when I tap on continue, and when I restart my phone.
I tried several hard reset through the usual methods (either through the about menu, or through the menu displayed using VolUp+VolDown at startup). Still the same problem. I guess it's a bug that should happen on many Titan devices. I contacted the HTC support and they told me to send my phone back to HTC for repair
Of course Zune won't let me restore the backup because of the firmware update not longer compatible with the backup.
Did anybody have the same problem with a stock htc titan rom?
I'm also wondering what is the new "HTC Log disable" command on the "CUST APPSBL" screen? I'm sure it wasn't there before the update. Is there some kind of htc specific logging that is enabled by default (since it is a "disable" command). What is being logged?
Also, the red diode (indicating when the battery is charging) is being lit during startup, which didn't happen before the update. Does that mean something?
Hi,
It is quite normal for the new Tango ROM to display that extra HTC specific step, even though it doesn't work!
I experimented with the Titan a bit and found that as soon as the Start screen appears after setup, before doing anything else, long press the Connection setup app in the app list and uninstall it.
It will enable normal functionality.
If needed you can always download it again from Marketplace.
「 Jai Hind 」
Sent from my GT-N7000 using xda app-developers app
It happened to me too!!!
Moreover, after a hard-reset the HTC Market disappeared in the market!
I disabled the pin to the sim re-formatted, and connected to electricity, and aftew few times HTC market reappeared (!), immediately updated ALL the htc software (even the connection wizard) and everything is OK now... exept the possibility to install INSIDER (by Microsoft)... it is said that the app is not available for my device (!!!) ... I used it until yesterday on my Titan with Mango... I REALLY DO NOT KNOW
BYE
link8506 said:
Hi,
A few days ago, I updated my HTC Titan (bought in 2011 in France as a sim-unlocked device) to the official Tango update (+ firmware update) through Zune.
Then, after doing a hard reset, the usual setup assistant is displayed, but at the end of it there is a new step that wasn't there before the update (titled "Almost Done") telling me that the phone is going to launch some kind of htc specific utility in order to configure my data connection for my carrier. Then after clicking on "continue", I see a black screen for about 15 seconds (like when an app doesn't manage to load properly and WP7 kills it because it took too long to start), then the start screen appears (but I don't receive the usual fake welcome SMS from Windows Phone).
I can launch apps, but the capacitive Back button, Start button, Search button don't react (they cause the phone to vibrate, but WP doesn't react to these commands).
After shutting down the phone and restarting it, I'm greeted by the setup recovering screen (titled "Welcome Back") telling me that Windows Phone will resume my setup where I left it (that explains why the capacitive buttons don't react: they were software disabled because Windows Phone considered it was still in first setup mode. Same for the fake welcome sms I didn't receive). Of course the same problem happens again when I tap on continue, and when I restart my phone.
I tried several hard reset through the usual methods (either through the about menu, or through the menu displayed using VolUp+VolDown at startup). Still the same problem. I guess it's a bug that should happen on many Titan devices. I contacted the HTC support and they told me to send my phone back to HTC for repair
Of course Zune won't let me restore the backup because of the firmware update not longer compatible with the backup.
Did anybody have the same problem with a stock htc titan rom?
I'm also wondering what is the new "HTC Log disable" command on the "CUST APPSBL" screen? I'm sure it wasn't there before the update. Is there some kind of htc specific logging that is enabled by default (since it is a "disable" command). What is being logged?
Also, the red diode (indicating when the battery is charging) is being lit during startup, which didn't happen before the update. Does that mean something?
Click to expand...
Click to collapse
Yes, exactly the same problem happened after hard-resetting on tango. I simply waited a bit with the phone on the main menu and the softkeys not working. After a while, I received the WP7 welcome text, and the softkeys started to work again.
maTTeo
Hi all,
I made a new hard-reset.
As suggested by maTTeo I simply waited even with softkeys not working... I only disactivated the pin on sim so that the Titan could find an internet connection.
After receiving the SMS of woelcome on WP7, I immediately upgraded all the HTC apps
Everythings seems fine for the moment...
BYE