Hello everyone,
is that it will do some days I want to restart my qtek 2020 v0.6. It was purchased and screen
Black bootloader mode with serial or USB v0.6. I tried hard reset but nothing is there.
When I run the rom flash main with HimaUpgradeUt_noID.exe or HimaUpgradeUt.exe
it refuses to nk.nbf, it makes me country id error 120 or error 112 connection error.
But against n I've no problem for the Roma Radio_.nbf and ms_.nbf the flash is going well until the end.
With mtty.exe I could write the original rom on the sd card and I put on my pc with ntrw_494.exe.
The Roma PPE cause a password to open with ER2003edit.
I wanted to start the application xdadev_all_unlock-v1.6_138.exe or xdadev_all_unlock May-v1.5.exe my pc tells me that this is not a valid win32 application.
As against this for me xda2unlock.exe met:
XDA Developers XDA2UNLOCK tool v1.2 XDA Developers XDA2UNLOCK tool v1.2
This program will extract the unlock code from your XDA II. This program will extract the unlock code from your XDA II.
For this to be possible, a few steps are necessary: For this to be possible, a few steps are necessary:
1. 1. The XDA II needs to be put in bootloader mode. The XDA II needs to be put in bootloader mode.
NOTE: THIS WILL WIPE ALL YOUR DATA SO FIRST BACK-UP! NOTE: THIS WILL WIPE ALL YOUR DATA SO FIRST BACK-UP!
You enter the bootloader by holding the Power button and the Action button You enter the bootloader by holding the Power button and the Action button
while pressing the stylus in the reset hole on the bottom. while pressing the stylus in the reset hole on the bottom.
In the bootloader mode, the display will be gray and say Serial at the top. In the bootloader mode, the display will be gray and say Serial at the top.
2. 2. Next put the device in the USB cradle. Next put the device in the USB cradle. The display will now say USB The display will now say USB
and the first time Windows will detect a new device. and the first time Windows will detect a new device.
3. 3. Disable USB in Active Sync in 'File -> Connection Settings' Disable USB in Active Sync in 'File -> Connection Settings'
Now the device is ready to extract the unlock code. Now the device is ready to extract the unlock code.
Type YES when you have completed the above steps and want to continue: yes Type YES when you have completed the above steps and want to continue: yes
Communication port opened. Communication port opened.
waiting for radio bootloader waiting for radio bootloader
reading first block... reading first block ...
reading second block... reading second block ...
The phone seems unlocked already! Seems unlocked the phone already!
Do not forget to enable USB in Active Sync again! Do not forget to enable USB in Active Sync again!
Press enter to close.... Press enter to close ....
For truly all information of PDA on the origin of the country id and that exact version
there is the device data.txt but for creation must be initiated HimaGetDeviceData.exe that tells me that this is not
win 32 application invalid.
And finally, after searching hard I tried with hex editor on the original rom, change the first line, but there is nothing ...
That is my question is how empty the memory of the PDA to install a new (windows) to
it can restart normally?
norinsimpel,
I really tried to read and unterstand your post, but you mixed up languages, your own post and parts of a program manual, so that it is all FUBAR.
Could you please edit it, e.g. in this way:
1. The problem in French
2. The problem in English
3. Description of your device, the ROM you have now, the ROM you want to flash.
I´m shure this would make it much easier to help you...
sorry for the language.
I am belgium, and I use google to translate.
I have a qtek 2020 bootloader V1.06
I do not know the original rom, It does not light.
I can not use HimaGetDeviceData.exe with devicedata.txt to know the exact rom
because it does not turn
Related
Here's something weird...
I have an early model PH10A XDA II...
was on ROM 0.81.00 USA
Radio: 1.05.09
Protocol: 1337.10b
Date 8-11-03
I'm trying to upgrade it to the latest i-mate ROM.
I have gotten to the point where it says "The current software is now being erased....the update should take 30 minutes." but the first time...it gave me an error and it asked me to reboot the device and try again...since then...
....it stays there for hours with no update, no errors, or feedback of any kind. All I get on the RUULog.log is "17:24:10 Connection with USB"..then nothing happens...
I have tried re-boots, hard boots, taking the battery out and waiting a few mins, making sure the battery is charged, I'm on XP and the latest Activesync 3.7.1, also I kill the wces...exe. app and still sits there..
I have tried the O2 version, the UK-02-version, himalayaupgradeut_197.exe...all to no avail...
Any other things I should attempt? I'm bootloader 0.23....
I'm still scouring the groups to see if anyone had this problem..
thanks!
re:Weird problem with early model HTC XDA II with 0.23 btldr
Thanks to these posts I can safely say I found a partial solution that works. From other similar posting, it seems the early bootloader 0.23 was a pre-release demo and not for public consumption...so this USB upgrade process does not work for this version.
What worked for me using this bootloader version was a combination of the posting here http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=93&PN=1 - using their choice #3.
1. Download ROM 1[1].72 SD.rar (ROM 1.72)
2. Extract ROM 1[1].72 SD.rar with WinRAR, you will find two files; ntrw.exe and ROM.nb1
3. Put them in any folder; say c:\ROM\
4. Go to DOS command and the folder contains the files
5. Type C:\ROM>ntrw write ROM.nb1 E: (Assume your card reader drive is E as shown in the below figure. Wait until finish writing the rom.
6. Put SD card into your XDAII, go to bootloader mode (Power + Reset + Directional Pad) and follow instruction on your device screen.
However, for this bootloader it definitely wanted a RAW formatted SD card, not a card formatted by XP/2000 card readers. I also tried other devices format Treo 600, etc...but what did the trick was to do a save to SD command using the USB/Serial program ROMUPDATE.exe located somewhere on this board.
This allowed the card to work with the bootloader...
Once this was done...I was able to insert the card on the card reader (and get an error - ingnore since it was raw format)...and type step #5.
Once this was done I was able to boot the device again.
To note..most of the solutions posted here work for public release bootloaders above 1.0...but this was an early release bootloader...and this is how you get this one to work. NOT using USB.
Now the next task is ...how do I upgrade the bootloader?
pda t-mobile mda ph10a
hi i have an old pda ph 10a ,and i want to know how to hard reset device, when i pres (power,navigation key ,and reset) mesage apears on screen says( serial v1,06) and nothing hapens
does anyone know how to reset and try to restore setings from pda (its on a german ,so that is more dificult)
removing SD card from device should solve your problem
pedjaar said:
hi i have an old pda ph 10a ,and i want to know how to hard reset device, when i pres (power,navigation key ,and reset) mesage apears on screen says( serial v1,06) and nothing hapens
does anyone know how to reset and try to restore setings from pda (its on a german ,so that is more dificult)
Click to expand...
Click to collapse
for hard reset u need not to press the navigation key just press power and reset.
and if this does not help try reinstalling the rom in boot loder mode(serial 1.06).
hi ,
i was updating my xda11 from the o2 web site to v172181.
i followed all the instructions fully and half way through it gave a fail message.it told me to remove xda and cradle from computer and retry after reseting xda.
the xda is stuck in limbo with no backlighting and serial on top of the screen and v1.06 at the bottom.
how do i get back to the start.
i am no programmer so try to make it as user friendly as possible please.
thanks for any help or advice
rob
hi guys/gals
what time of the day or nite do the experts come on , i know its an international board
rob
when the screen is no blacklight and display "Serial" on top and "v1.06" on the bottom , this is the bootloader mode ....
you can put your device in craddle and re-run an upgrade in bootloader mode ....
- download an available upgrade for your device
- put your device in bootloader mode if it isn't it ( press and hold power button and reset until screen display "serial" & "v1.06")
- put your device in craddle
- upgrade your device normally
it should works fine
tofclock
thks for the reply
i will try that now ,i tried already but it wouldnt connect to active sync.
ah well , here goes again
rob
no , still wont connect to active sync
No need to connect with active sync ...
just put in bootloader mode , put in the craddle , and run himaupgradeut.exe
serching for himaupgradeut.exe on this site.have you a download path for it or can you tell where it is
cheers
rob
Ooooh ...
your upgrade is a .exe file ...
ok
in this .exe fie , there is 6 files
HimaClearJumpCode.exe --> ??
GetDeviceDate.exe --> to get device info
HimaUpgradeUt.exe --> to upgrade device
nk.nbf --> Os rom
Radio_.nbf --> Radio rom
ms_.nbf --> Extended_rom
rom for himalaya are on 2 different package :
zip file contains the 6 files
or exe file
the procedure is simple :
put your himalaya in bootloader mode
put the device in craddle
and then , if you have a rom upgrade like an exe file , run it , and if you have a zip file , unzip it and run himaupgradeut.exe
you can find all files you need
HERE
or
HERE
tofclock ,
great advice so far , thanks
i tried the above links and i dont have permission to view/open site.
do i need a password or permission from a mod.
rob
oh sorry ......
Go to ftp://xda:[email protected] and then , navigate in folders Himalaya or HimalayaSeS
tofclock ,
I figured out what happened by trawling through old topics and the help i recieved from yourself.
i presumed the usb conection feed power to xda11 as i have the ac charger in my bedroom for topping up battery.
i connected ac charger to cradle and reran upgrade and bingo
thanks for all the help friend
Hi! I got a serious problem with my Trion. I unlockedthe device with HTC Hermes SIM & CID Unlock – v2a.After this, I started the upgarde software for upgrading to 1.35.255.102. My device fell from the table and USB connection was lost at the stage of 5% upgrading. Device now starts only in bootloader mode, stating SPL-1.09. When I try to restart the flash, it tells me: Invalid Vender ID. I tried to fix the problem with the solution recommended in Wiki :
Problem 4: Device is stuck in bootloader mode (tri-color screen)
Disable ActiveSync: connections -- settings -- uncheck "Allow USB Connections"
Remove the battery, put it back in, connect the USB cable, power on the unit (this should allow the USB port to be opened again)
Wait a minute or two, if you get a message that device cannot be recognized just close and ignore it
Open mtty.exe and select "USB" from the dialog box, then hit Ok.
You should see a white screen, hit enter and you should see a prompt like this: "USB>"
Type set 14 0 (do not copy and paste!!!) and hit enter
Soft reset with stylus
OS ROM and radio version should be back and OS functional, the unit isn't a BRICK anymore!
but no success. Can anybody help me there?
attached the USB log file. please help
research12 said:
attached the USB log file. please help
Click to expand...
Click to collapse
Corrupted CID and bootloader 1.09. If you can't boot the OS send it to service centre to repair.
thanks, pof. I appreciate your reply even though it was the answer I was afraid of...
I am sorry to give that answer, there is so many people with the same probelm, but still haven't figured out a way to fix this...
you don't have to be sorry at all. you are a great help with most things here in the forum.
well, Hard-SPL is released now! sorry for delay, I got distracted elsewhere
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
[size=+2]Donations are always appreciated to the big link in our signature ("elite project"). You can also donate via the link offered in the new Hard-SPL program. Thank you!![/size]
Preparations:
first an important note, if you want to flash more than one Iolite, contact cmonex for additional licenses via http://support.htc-unlocks.com. (the first license is transparently granted and free, so normal users do not need to worry.)
0) this package is for Iolite (Touch Cruise II/2009) devices. for any IOLI***** so far (SSPL loader checks this and gives a warning if needed), afaik there is no CDMA version so all the model variations should be fine.
1) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions:
read this if unsure how to install Hard-SPL...
1) download latest Hard-SPL package (currently v1.10) from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!!!
3) NEW: internet access is required as the program checks online for updates and license.
4) run Iolite-Hard-SPL EXE on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is strongly recommended, on XP administrator login is required. important: if your AV (norton/symantec mainly) warns about a virus, ignore it, it just doesn't like the packer I used to pack the program.
5) if possible, always use Automatic flash mode (for uses of Manual mode, see troubleshooting section)
6) it will ask you to wait while it prepares for the flashing, press OK. follow steps in the program and then in the RUU.
7) some notes: it should go through without any error messages, if one does pop up, then please follow the instructions included in the error text. if no specific instruction is shown, then ask for help in the thread, but this should not ever occur (as this means a really fatal error occurred).
more notes: when RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
8) device should go to a tricolour screen now that says 1.09.C-SSPL, this is the SSPL version, which is temporary.
9) SPL flashes, device automatically reboots, job done.
10) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.09.OliNex, which is the Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package will soon be posted in this post as well. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
NOTE 3: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert, which is not public) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or customRUU if you need to flash cooked ROM.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
Manual flash mode for USB issues: you should usually go for Automatic flash mode; you must only attempt the Manual mode option if Automatic flash mode or SSPL-Manual.exe already put device in SSPL tricolour screen and you got USB issues. any other errors triggered while running in Autoflash mode will have to be fixed as instructed in the error message.
ModelID checking:
- afaik no CDMA model, so doesn't matter but let me know if you got any problems.
nothing happens on the device, does not enter tricolour screen mode:
- anyone having problems with the device entering SSPL automatically, please make sure you watch the device screen if it asks about running files. also try unchecking advanced usb functionality in settings.
- if it crashes instead of entering SSPL, you need to use Automatic mode.
general usb connection error problems if you get connection error in RUU after the device goes to 1.09.C-SSPL screen:
- try manual SSPL: copy SSPL-Manual-Iolite exe to the device and run it, then when it went to 1.09.C-SSPL tricolour screen and shows "USB" at the bottom in this screen, use Manual option in the Hard-SPL program on the PC.
- make sure device was still synced via USB to the PC at the point of it entering SSPL (the 1.09.C-SSPL screen)!
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time and perhaps if you are on vista), then if RUU times out, but device still says "USB" on the tricolour screen, just leave it there and re-run the RUU when driver installation finishes.
- finally, you can try disabling antivirus or firewall programs on the PC.
other issues:
- if Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
- if device reboots instead of going to SSPL screen (1.09.C-SSPL), contact us by PM'ing cmonex. do not PM OliNex user, that is not monitored frequently.
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!:
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. take the SPL relocker attachment, and run the EXE - this will flash 1.09.0000 stock SPL. simple as that!
2. flash
3. verify if it flashed by checking version in tricolour screen, it should say 1.09.0000.
credits:
first, "OliNex" is a team which means: cmonex + Olipro
Olipro -> EXE program concept that runs on the PC, Hard-SPL concept, server code, maintaining licenses
cmonex -> new PC EXE & SSPL loader for windows mobile and SSPL binary. Hard-SPL binary. (SSPL loader: partially based on haret and old pof&Olipro jumpspl code)
---reserved post---
---reserved---
"IOLI100
SPL-1.09.oliNex
MicroP-Iolite(LED) v5"?
Has it released? It has appeared on the interenet.
Let me see see!
chenjun_conan said:
"IOLI100
SPL-1.09.oliNex
MicroP-Iolite(LED) v5"?
Has it released? It has appeared on the interenet.
Click to expand...
Click to collapse
yes, I've sent it to several people. I'm posting it here too in a sec.
edit: posted
Dan
OK
you are great.
Thank you so much.
Fantastish!
THANK U VERY VERY MUCH!!!
after HSPL and flashing to Rissian ROM it says "Your OS ROM isn' t customized for your hardware Please reflash the proper ROM code or contact the service center' .
In the internet i've read that taking out the battery for 10-15 minutes must help. But it doesn't. Please help!
Great job, big thanks!
@ cmonex was send you a PM, please answer me. Thanks!
Greetings
Baga12 said:
after HSPL and flashing to Rissian ROM it says "Your OS ROM isn' t customized for your hardware Please reflash the proper ROM code or contact the service center' .
In the internet i've read that taking out the battery for 10-15 minutes must help. But it doesn't. Please help!
Click to expand...
Click to collapse
try to flash WWE|Eng and post result here
Nice work as usual guys.
Thread stuck
Dave
After IoliteSPLRelocker, the HSPL' s not working, why? Please help
Thank you
Thank you so much for your hard work.
My Iolite can do do just about anything right now.
Baga12 said:
After IoliteSPLRelocker, the HSPL' s not working, why? Please help
Click to expand...
Click to collapse
You tell us? It what way doesn't it work?
Dave
I tried to test the IoliteSPLRelocker, it flashed correctly, then I again tried to flash the HSPL with mhile my device was in three color mode, but it stops at the 0%, not going more. Stupid of me, of course
So? what about WWE Roms? Does anybody flash them at new HSPL?
thanks very much . it's great'
Baga12 said:
I tried to test the IoliteSPLRelocker, it flashed correctly, then I again tried to flash the HSPL with mhile my device was in three color mode, but it stops at the 0%, not going more. Stupid of me, of course
Click to expand...
Click to collapse
Please help!
max_nya said:
So? what about WWE Roms? Does anybody flash them at new HSPL?
Click to expand...
Click to collapse
Once you have Hard SPL, you can flash any ROM's (Cooked or Shipped) to your device. So put on Hard SPL, find a WWE ROM and flash it .
Baga12 said:
Please help!
Click to expand...
Click to collapse
I've just checked the re-locked and it does contain the correct SPL.
Connect your phone to you PC using AS, and then run the re-locked, once done your SPL should be 1.09 (with the .OliNex) again
Dave
Hello people, when my phone was bricked, i was looking for any forums to try to come back it to the life , and i found a great tutorial called "Gold Card Method" and it works in HTC STARTREK DEVICES, just follow the instructions in the tutorial.
NOTE:
This method permits you to make a by pass when the device try to recognize the rom and this method deceives the device into thinking that the device is CID UNLOCK; after that you could install any OFFICIAL ROM.
Check this for complete info:
http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
if you have problems using QMAT soft check this:
To make it work, please check the following :
- On the device, allow start of itsutils.dll
- On some devices you must set the right security permissions via Registry Editor :
HKLM\Security\Policies\Policies\"00001001" set to integer 1
After that, select the device under "device key" to generate a goldcard image.
Then you can choose either "Save Goldcard Image to File" to generate a SDCard Image,
or write the Goldcard directly to the SD Card inserted in your PDA/Smartphone via "Save Goldcard
Image to WINCE SD".
This was taken from Manual QMAT: page 38
or go to this webpage
http://revskills.de/downloads/QMATManual.pdf
So, people don't afraid if your phone is bricked, nothing is impossible
With this method i was able to revive my HTC S411 7 months ago, and i want to share it!!!
Good Luck!!!!, Regards from Perú
I don't understand. Isn't QMAT for Qualcomm devices? Didn't the StarTrek run a TI OMAP?
it works, don't afraid
İ cant go to the bootloader mode just blackscrren with htc logo What am i suppose to do?Help me Please!!!
pull out the battert, and press put in the slot, after that, plug the usb cable to pc + press + hold the soft buttons (camera and record)... you get to enter in bootloader screen... good luck!!! follow my post
I don't have this REG.... in Windows 7