I bought one of these off of eBay http://cgi.ebay.co.uk/In-Car-FM-Tra...s_RL?hash=item3ef725a26f&_trksid=p3286.c0.m14
Unfortunately its very disappointing. It does not charge the phone whilst plugged in. The audio quality is acceptable whilst the car isn't moving. Part of this is due to the very poor quality USB charger supplied, a better one from my Sat Nav improved the situation slightly.
I already have a cheap transmitter that plugs in the 3.5mm socket, but this seems to cut off the bass from the music.
I am looking to replace my Sat Nav and MP3 player with the phone. I have already ordered a car cradle, but would consider a cradle with built-in FM transmitter. I also don't really want the hands free built-in like the transmitter above. I would rather use my bluetooth headset.
Any suggestions?
I know people have mentioned the motorola T505, but I suspect that the battery life on that isn't more than a couple of hours.
Hi well as far as iam aware no of these will charge any of the HTC devices ment for audio only but could be wrong
http://www.amazon.co.uk/exec/obidos/ASIN/B001QIXDNG/ref=ox_ya_oh_product
I got a slightly different one, but the link now shows this item... Universal audio input, usb socket for charging anything you choose. Audio quality is reasonable, but it's a transmitter so it will always sound a bit dodgy. Also, the hero is a phone so its audio quality isn't incredible either, but it'll do for whiling away a road trip!
The only way you'll get high quality sound is with an aux input cable, decent speakers, and a high quality source file playing on a decent mp3 player.
Product-specific docks are stupid.
Use this with the device you bought of ebay...
http://www.amazon.co.uk/Multifuncti...3?ie=UTF8&s=electronics&qid=1250372929&sr=1-3
Plug the fm transmitter into the audio part and the charger into the charging part.
Then just plug this into the phone with those parts already connected
Related
Hi. im using a car kit that connects the cassete to a 3.5mm jack and a converter to a 2.5mm jack to my MDA. I hate the quality of the sound. I have to turn the music up way up. almost near maximum both in the phone and the car stereo. Is there any way that I can hook my MDA to my car to play mp3's without diminished quality??? id really appreciate any help.
thanks in advance
Bryan
What software are you playing the files with? Use GSPlayer or TCPMP over the built in WMP (the sound quality is far greater with those programs).
yeah im using wm5... i dont think it has anything to do with the software. im thinkin it has something to do with the headset jack bein 2.5mm. i own an n-gage too and it has the same kind of jack. same kind of results. really poor quality. but when you use the earphones/headphones, the quality is really good. can someone confirm this?
well things seem to be going well for me today. fixed 2 problems with my MDA today :lol:
anyway, figured out the loss of quality when i hooked my MDA to with a cassette adapter and a 2.5mm to 3.5mm jack was not because of any of the accessory defect and not a phone defect... it all trailed back the my cassette player in the car. figures tho... the tape deck probably has never been used in 6 years :lol:
just cleaned it up with a cassette cleaner... TADA! clear music. although i need to run it a couple more time theres some interference going on. probably needs more cleaning. cheers!
bryan :lol:
What kind of car radio do you have??
Sometimes (also with the older car hifi) on the back you have an IP bus or some connector to the cd changer.
You can buy connectors (ebay) brom this ipbus to the 2,5 jack (or3,5)
I have my pioneer ipbus directly connected to my Magician. Works perfect with no loss of quality
I had trouble finding a 2.5mm to 3.5mm adapter that worked reliably, so this is what I did.
I bought a Globalsat GBH-820 BT adapter, which supports A2DP and AVRCP, and has a 3.5mm jack. So, I just plug in the 3.5mm plug from my cassette adapter, activate the "Wireless Stereo" profile for the GBH-820, and viola, music in my car from my 8125!
The sound quality is better using TCPMP, since I can use the equalizer to add bass and cut out some high-end hiss. However, the AVRCP functions don't work with TCPMP. They do work with WMP.
Is the quality as good as a CD player, or even using actual cassettes, would be? Probably not, but it's nicer having a wider range of music available to listen to in the car, and not having to tote CDs or tapes around in the car. And, makes it a little easier to keep hanging on to my 10yr old Q45 for another couple of years.
fj1200 said:
What kind of car radio do you have??
Sometimes (also with the older car hifi) on the back you have an IP bus or some connector to the cd changer.
You can buy connectors (ebay) brom this ipbus to the 2,5 jack (or3,5)
I have my pioneer ipbus directly connected to my Magician. Works perfect with no loss of quality
Click to expand...
Click to collapse
i have a stock car radio. hmmm i actually thought about that. but i was thinkin, it would be kinda messy to install that by myself? i mean wires all over the place. i kinda want to keep my car as clean lookin as possible. i was actually thinkin of letting a professional do it for me instead, but i see negatives from it.
1. gotta pay about $100 for installation or so. plus the converter. (vs $20 at most for the casette deck adapter. just borrowed what my bro uses for his ipod)
2. wouldnt that mean that i'll lose the function of my cd changer? i know i wouldnt actually need it once i got it running but then again, it still would be nice to have one.
and 2 good things:
1, better quality
2. more space in my glove compartment. :lol: cd changer is located there.
i got question tho. since you replaced the cd changer, when you play music, do you play music through the cd option?
I saw this the other day at a local car audio store. I hear it works great. It's a bluetooth Pioneer deck. Here is the link.
http://cgi.ebay.com/NEW-2006-PIONEE...ryZ39752QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
:wink:
It depends what type of car you have, but you can tap directly into the AUX of your car and transfer audio through headphone jack.
I did it on TL http://www.fperkins.com/AudioinputandAudiovox6600installina2006AcuraTL.html
Why not use an FM transmitter device?
I currently use this: http://www.the-gadgeteer.com/review/irock_wireless_music_adapter_review
Works great.
MPIIIMan said:
Why not use an FM transmitter device?
I currently use this: http://www.the-gadgeteer.com/review/irock_wireless_music_adapter_review
Works great.
Click to expand...
Click to collapse
Do you have to use a 3.5mm to 2.5mm adapter? If so, which one do you use?
Yep I use an adapter I picked up at Radio Shack.
Hello,
From the searches I have done on here and other forums to include cell phone stores, I can't seem to find any information pertaining to USB headphones. Basically my question is: Are there any reasonably priced headphones that directly plug into the usb port (without any adapters or mini jacks as the plug)?
Thanks.
HTC headphones
http://store.wmexperts.com/htc-stereo-headset/11A29A1450.htm
For 15 bucks you get something from HTC that's workable until you find what you really want. Decent music quality. No adaptor needed.
It is funny you post this. I was just searching for some today and I purchased these.
If you search OEM Heaphones Fuze on eBay, you can find some for $10 shipped.
i have a sprint TP and DL the fuse FM radio app and it says that the phone uses the headphones as an antenna. mine does not work, you think with the fuse headphone it would??
USB Headphones - Not all work?
Are there different types of mini-USB headphones?
I just purchased a pair of Motorola "Stereo Headset with Enhanced Mini USB Connector" headphones that do not work when plugged into my fuze.
However, I went and found the old headphones from my Dash and plugged it in and it works.
Both have the phone/music switch.
Why would one work and other not? The shape of the of the jack on the old set just a little different that the Motorola's which look like a fat little "t" and is the same shape as all the connector wires and charging wires I am using. The shape of the jack on the old ones, however, does match the shape of the fuze jack.
Sorry if this is an obvious questions, but what am I missing? What do I need to look for when purchasing earphone/headset?
I have answered my own question. HTC is using a proprietary form of USB...extUSB. It combines audio and data, so you can use regular mini-USB for everything except audio. This bugs me. why do you take something that is supposed to be "universal" then make it proprietary. So now I gotta look for and buy special headphones.
bluetooth headset
I personally use the bt3030 bluetooth headset from jabra. Full stereo use any regular headphones you like. I use the stock ear buds works fine. These work for phone calls sprint nav as well as full stereo from mp3's basically any audio can be funnelled into these. cost around 80 bucks.
arsmithsr said:
I personally use the bt3030 bluetooth headset from jabra. Full stereo use any regular headphones you like. I use the stock ear buds works fine. These work for phone calls sprint nav as well as full stereo from mp3's basically any audio can be funnelled into these. cost around 80 bucks.
Click to expand...
Click to collapse
You can get the 3030's from newegg for 40 shipped in bulk packaging. Work great and no need to plug them into the phone since they are bluetooth. Give you the ability to answer phone, have remote, and listen to music. I love them. Got some skull candy headphones for 10 bucks from marshalls to replace the stock headphones they came with. Check them out
Headphones
Anyone found any USB headphones that have equal cord length on both sides? I really hate the uneven setup..always seems to pull one or the other out...... Thanks !!
My car does not have an aux port for the simple solution, so about a year ago I reluctantly invested in this guy:
http://www.amazon.com/FlexSMART-Transmitter-Hands-Free-Blackberry-Smartphones/dp/B003PPGOC0
I've used countless wireless transmitters in the past and they were all garbage. You'd have to have the phone right up against the radio, and even then it wasn't that clear. This is by far the best product I've used for the purpose. You can connect via bluetooth or even a 3.5mm headphone port(cable included) on the side. My phone doesn't have to be anywhere NEAR the unit for it to work perfectly. It also comes with a microusb cable that plugs directly into a usb port on the unit, to charge while it plays. I highly recommend this product.
motorola roadster
I use the motorola roadster.
You can find an OEM version for about ~ $40 if you google search for it.
I use it along with voice command. You touch a button on the speaker phone and my S2 lights up and asks for a command. Ofcourse it also has FM transmitter mode and it has a play/pause button, though it doesn't seem to work with the stock music player, but the play/pause works with Winamp.
Not as nice as the bluetooth built into my wife's 2012 murano radio but on my older 2002 pathfinder this works great.
Thats cool. Does it matter how you set a station? Does it have static like regular "transmitters" ? I used to use/try one with my zune, and it was awful.
My friend plugged his in with an AUX jack (from top of phone into car radio) and it played stereo/cd quality
My car doesn't have an aux jack but I think it can be done for 20-40$? maybe
with the motorola roadster how do you set the fm transmitter?
I'll be honest with you - I've never seen an FM transmitter that wasn't horrible.
I'd invest in a new headunit (with an aux input, or MAYBE bluetooth if you must have wireless) and a wiring harness adapter kit over any FM transmitter, any day of the week.
I'm in the same boat as the OP, my car doesn't even support an aftermarket stereo due to the Bose/HUD integration and I got the FlexSmart and love it as well. Would certainly recommend to anyone.
I'm with Edgarhighman . How's the audio quality? Any static?
skelevate said:
I'm with Edgarhighman . How's the audio quality? Any static?
Click to expand...
Click to collapse
I'm thinking I'll DIY aux input or have a store down the street do it
I'm not yet fond of splicing, soldering, or using a heat gun =/
VERY minimal static. Nothing that is even close to hindering the experience.
Hi All,
Per the discussion of this thread: http://forum.xda-developers.com/showthread.php?t=1367120&highlight=usb+amazon+charger&page=3
I bought this Car USB Outlet Charger: http://www.amazon.com/gp/product/B002F0200Q/ref=oh_o02_s00_i00_details
It charges under AC mode, but if I also connect the 3.5mm jack to my cars speakers there is a high pitched noise that increases as the RPM of my engine increases (for example if I put my car in neutral the sound is at the lowest frequency, and if i step on it the sound shoots up).
If I remove the charger from the phone the noise stops. If I begin playing music the noise also goes away. If I stop any playing music then the high pitch noise will return after a brief (~5sec) period.
It's not a terrible issue because it doesn't interfere with playing audio, but it is an issue if nothing is playing and the car speaker is turned on.
Would appreciate any insight.
Thanks,
DL
I have the same issue. It's not the phone, it's your car. You are hearing the alternator noise through the electrical. I have some friends who are car audio installers and what you have is a most likely a bad ground on the auxiliary port. I've tried with 3 or 4 phones with my car and they all do it while charging.
From what I understand there's 2 ways to fix it. Have an audio Installer open it up and ground it properly. This takes time and could be complicated depending where the fault is.
There's also a magnetic shielding thing tthat you can pass your auxiliary cable through which is supposed to be like $5. I've not tried the simple fix yet. I keep forgetting to ask what iit is exactly.
Sent from my ADR6425LVW using Tapatalk
Well I was thinking it was an issue with the actual charger, not my car...
I've used a blackberry, and itouch before while charging and going to the car audio without the problem (but this was not with the Belkin adapter I linked to).
Just to be clear when you say an issue with grounding of the auxillary port you are referring to the the 3.5mm input, not the cigarette lighter port?
Let me try switching the cigarette port.
Yeah, the 3.5mm port. I've also tried changing chargers and nothing has made a difference.
so what you are saying is the issue is with my 3.5mm jack even though the noise doesnt come through if the charger is disconnected?
I've never had any problems with other devices when charging and playing audio.
Only with this particular usb charger and my rezound.
happens to me sometimes too...I just act like I'm in some kind of spaceship as I zoom down the highway
I'm thinking to buy something like this to power my devices, probably a good investment...
goo DOT gl/s0wO7 (can't post links yet, redirect to amazon for a powerline 200W power inverter)
Had the problem with a Verizon charger, took it back and the new one worked fine.
You could try some snap chokes (ferrite cores) they snap around the outside of the cables you may have seen them on some of your usb cables, they reduce interference
radio shack search "snap choke" they have two sizes that fit around the outside of the cable, 5mm and 3.5mm ... they come two to a package, try using them on the power wire and if that doesn't work try it on your aux output wire, they just snap on. you can snap them off if you want to remove them, you can use more than one on a cable if that helps
This is not a fix all and may or may not work but this is what they are designed for, it at least may cut down the noise some but no guarantee's
Once you search on radio shack, read the reviews on them you will see what some people are using them for, they are about $3.00 for 2 chokes
craigsdocks said:
You could try some snap chokes (ferrite cores) they snap around the outside of the cables you may have seen them on some of your usb cables, they reduce interference
radio shack search "snap choke" they have two sizes that fit around the outside of the cable, 5mm and 3.5mm ... they come two to a package, try using them on the power wire and if that doesn't work try it on your aux output wire, they just snap on. you can snap them off if you want to remove them, you can use more than one on a cable if that helps
This is not a fix all and may or may not work but this is what they are designed for, it at least may cut down the noise some but no guarantee's
Once you search on radio shack, read the reviews on them you will see what some people are using them for, they are about $3.00 for 2 chokes
Click to expand...
Click to collapse
Thank you for the suggestion. I will certainly take this idea into consideration.
I do think the piece is defective, but the amazon seller only offers a return, and it was only 5$, not sure if its worth the hassle.
The charging circuit on your alternator has a bad filter. The whine you're hearing is the AC generated...the frequency corresponds with your RPM. Basically, the rectifier diodes are doing what they are supposed to and putting that AC into the electrical system as pulsed DC, but there are capacitors and chokes that are supposed to smooth the current out so it doesn't stress out your equipment. It's possible the charger you got doesn't have a filter either. Ensuring your equipment has a good ground should help, but it may not fix the sound...you'd have to replace your alternator.
Its ground feedback. Could be anywhere in your car. Could also be the charger but probably not.
I have a similar effect, but fortunately it does go away once I start playing music. I only hear the noise when nothing is playing. I don't engine noise, just static. I know its related to the changing connect since it goes away when I unplug it.
I was thinking about seeing if there is something to impede interference that I can put inline with the cable or on it.
My aux audio was an PAC Audio connection that I installed, and the dock/charger I have is kind of cheap-o, so I figure its just the price of being frugal.
yes thanks all for the advice and feedback.
@ssb13 yes the sound interestingly stops right before any music plays, and then has a short delay before coming back after the music finishes.
I suspect a ground loop isolator would solve your problems.
Here's one from Kensington on Amazon:
http://tinyurl.com/6m58v6s
But there are several other makes that probably would work equally well. Just do a search on Amazon for a ground loop isolator.
Check out the comments on the Kensington one and see if the problems sound familiar.
I have the exact same problem! It happens with both the AC cigarette charger and the usb cable I have connected through my headunit. I have a cheap radioshack stereo cable as the connection between my rezound and the headunit, but when I've used headphones I don't seem to notice it either because the music is too loud to notice it or there isn't any interference. So I'm assuming the interference is caused by a feedback loop since power comes in from the charger and then audio goes out through the headphone jack and back into the car.
car charger noise
I purchased and installed an EMI/RFI suppressor from Mouser. It is a 2-piece ferrite cylinder that fits around the USB cable coming from the car charger/power supply. Unfortunately, it made absolutely NO DIFFERENCE in the noise. It is the same type of suppressor that is sometimes installed by the manufacturer on power supply output cables, so I was hopeful that it would work. Guess I will try looking for a loose ground connection.
[
A ferrite ("snap choke," "RFI suppressor") won't do a thing at audio frequencies. You're hearing whine from the alternator. It's worse because you have a ground loop - the phone is grounded by both the charger and the audio jacks. It's probably worse when no music is playing because the phone then turns off the output amplifier, making the output a high impedance and letting the noise be heard due to the ground loop. A ground isolator in the audio line will probably help, but may not completely eliminate, the noise. Why not get a Bluetooth audio adapter for your car?
Ground loops suck, at home they can be fixed by breaking off the grounding pin on a power strip and using that. But you can't do that in your car.
A short review...
I was very excited to purchase this and rid myself of the AUX cord in my Xterra!
I spent 60 or 70$ on this item at bestbuy.com.
Pairing works great, get in the car, scan my NFC that enables bluetooth and all that automated goodness. The sound quality is comparable to the AUX cable, I find.
That is about the extent of the PROS.
The CONS is the battery life and the design of the unit.
The battery life is quite disappointing. From what I can estimate, playback time may be near 1 hour with a full charge. Though, I keep the stereoclip constantly plugged in via cigarette lighter. Even though it is plugged in, it still dies! Though, plugged in and playing, the playtime is closer to an hour and a half.
I say that the design of the stereo clip is bad because the jack does not insert flush-ly against the AUX port. You can see what I mean in the picture attached. Also, my Xterra's AUX port doesn't help this because it TOO is also designed poorly as the AUX port is indented into the dash. In a good design, it should be 'indented' OUTWARD! So boo on both HTC and Nissan for their horrible designs! lol
I don't regret buying the stereo clip, but the battery life sucks and I am forced to keep an eye on its charge and with it being inserted only about 80% of the way, I believe the sound quality could possibly improve, but I may never know what it sounds like 100% inserted in my car.
I bought an extension jack so that it is able to be inserted fully, but it became a mono set once I plugged it into the extension.
I love this item and the concept, completely! But, for others that have this item, do you find the same flaws? How do you feel about the item?
What exactly does this do? Basically use the USB port to transmit audio?
↑ It's a Bluetooth receiver.
I have one and often use it 4+hours without a charge.
I did return one though because the battery completely failed.
I've had mine for about 2 mths now. Hardly ever charge it and use it for about 45mins each day. Plug it in, switch BT on in my phone and go. Does exactly what it's supposed to. Sounds amazing. It's def a good buy.
Sent from my EVO using Tapatalk 2
regalpimpin said:
↑ It's a Bluetooth receiver.
I have one and often use it 4+hours without a charge.
I did return one though because the battery completely failed.
Click to expand...
Click to collapse
Ahh, thanks buddy, was curious.
DevalB said:
What exactly does this do? Basically use the USB port to transmit audio?
Click to expand...
Click to collapse
It just plugs into the AUX port in your car and then uses Apt-X Bluetooth to receive the signal for the audio. Apt-X is better sound quality than the older A2DP, but there seems to be a slight delay in audio transfer(~1.5 seconds).
I have the Samsung one, which is half the price, but does the same thing. I like it quite well but don't use it as much as I thought I would.
tyler.durden said:
It just plugs into the AUX port in your car and then uses Apt-X Bluetooth to receive the signal for the audio. Apt-X is better sound quality than the older A2DP, but there seems to be a slight delay in audio transfer(~1.5 seconds).
I have the Samsung one, which is half the price, but does the same thing. I like it quite well but don't use it as much as I thought I would.
Click to expand...
Click to collapse
Ahh thanks buddy, I have BT already enabled with my car, so I wasn't sure what this did.