hi all,
====================================================================================
a new version is now available for android - go to google play
====================================================================================
after a long time where i had so many tips and software solutions from this community it is about time a put something back to it.
i have been looking for an application to allow me record a voice memo and send it to myself as a reminder with a voice clip attached.
found a commercial program that did not do it as i wanted so had decided to do it myself.
MemoMe is a light application that enables you to record your memo when you just got an idea or remembered something you do not want to forget, like when you drive or just do your shopping... it goes to your mail or your secretary mail etc. easy to use and configure. it supports all WM devices and all screens.
MemoMe uses any one of your existing email account so no data is passed on and your personal info is untouched, this is mainly for security reasons so no
one can use your smtp info or expose your user is & password.
as said it is offered as a freeware to all as a tribute to this wonderful comunity.
as per donations etc - is you feel like donating, please think of someone who really needs it like poor children etc or donate to charity.
a nice thank you is much more than i need.
http://download.arkom.co.il/freeware/MemoMe_Freeware.CAB
have fun...
OK, the first official release is now available for download.
change log from the pre - release:
- UI was completely changed.
- many internal engine changes
- sound effects were added
- the send engine was totaly changed and due to security reasons there is no direct SMTP support at all. the only mechanism supported is sending the Memo using the internal outlook engine. any existing account can be used and the configurator shows all available options. in the older version there was a need to provide your SMTP server, username and password - not very good for security...
this way no sensitive data is stored to be a potential risk.
if i will find a way to use a public service or any other option were no info will be stored i will consider.
setup & update procedure:
just download one of the setup packages either EXE or CAB and install it
if you have installed any older version i recommend you uninstall it and delete the folder to make sure nothing is left behind
run the config utility and just follow the few selections and save.
very easy to use and nothing to write a manual for
now you can use the MemoMe app and enjoy !
for any questions or requests or ... just let me know
may you all have a great weekend
=============== 16/09/2009 ================ Version update ==========================
there is an update available for download at the same links above
ChangeLog:
- AutoPilot: it is now possible to set the app to load in auto pilot mode where it does not show all 4 buttons etc. the app loads directly in recording mode where there is one big stop recording button on screen. tapping the stop recording button will automatically send the memo and exit.
naturaly the standard mode is also available - look at the configurator screen...
- SoundCompress: there is an option to dramatically compress the memo file sise (for internet air time saving) a typical 300 KB file will be ~20KB (!!), of course voice quality will be a slightly lower... but realy not too much
- Splash screen time is neerly nothing now on the AutoPilot mode...
- Configurator is automatically loaded if first run or no INI. no need to exit and run configurator...
- internal engine modifications...
- no change in pricing model - this is still the same - free
in spite of huge interest from mobile operators to use it as an embedded application to increase data the application will stay freeware.
will be glad to have your comments (and wish lists)
===================================== 19/12/2009 ================================
a new version is now available for download - 1.5.0
- a major UI change was done and major internal engine
- the audio quality is well kept but can now bw compressed
- you can now select a differentrecording time by just entering your rec time value in seconds
- any device - any OS version - any screen resolution
this is the last and final freeware version as the application will now go to its commercial phase with many more features.
for most of us this basic version is exactly what we need...
=======================Version update to 1.5.1 =============== January 20 2010 ======================
a new version is available from the link above
- time recording bug - fixed
- compression bug fixed
- added indicators for compression mode and time recording / time left
====================== version update to 1.6.0 ================== Jan 23 2010 =======================
new version, answering to most requests
change log:
1. audio engine completly renewed - now normal audio will go as WAV and compressed as OGG
2. in AutoPilot you can pause and resume as much as you like. don't forget to set the option in config...
3. the app can now hide for faster reload - set in config...
4. you can set the subject - allow in config...
5. minor internal fixes
note: if you use soundFX you will get a beep in audio file every time you pause so you can know where you paused
if it is not wanted stop soundfx in config
enjoy...
enjoy !
Help me with Setup
Hi, I am having problems sending to my mailbox I am not sure of the smtp address, could you help with the setup if its not too much trouble, I am using windows live mail........................Thanks for the neat apps
currently the application supports 2 options of sending your Memo:
1 - using your SMTP information where you will have to enter your SMTP server, User & Password and to mark the Authentication if your server requires (most do).
2 - using your AS pocket outlook. if your device is configured to sync your email using pocket outlook (means your outlook can send / receive email) and the default account name is ActiveSync, that option will send the meno using this account. so when you next manually Send/Recv or it performs an automatic Send/Recv according the time intervals you specified.
the nextversion will ofer a different mechanism - either you use your outlook and by this BTW you dont even have to know or provide your SMTP info or the application will directly send using a special set SMTP account I will provide it internally.
i hope by this weekend i will have sometime so i will update the application, in the download server there is a "fresh" version - with fresh user interface that is the final UI from now i will update the functionality only -
- it will allow taking a photo, add a memo to it and send
- it will allow sending to third party as well
and the "wish list" is getting longer and longer as other guys are also sending feedbacks with ideas...
one thing will remain - as much it will be further developped i will keep it free, that's my obligation to this great community that provided me with so many free applications so far
Thanks for the information I will wait for you updated version, btw great work and thanks
you can now go back to the first post - i've updated the post (and app)
Thanks for the update..I didn't notice any changes in the UI, I got the same UI as the previous ver... there were some changes in the configuration.. didn't see any option to take a photo either maybe I downloaded the wrong file?????
oh, i see.
you probably downloaded the temporary version.
the previous version had a simple blue backgroung and the white one with rounded buttons was just added, but that is not your problem
the version available now is the latest one (last night) and is final (before the next one )
as i said the next version will have the camera option and more, it was important to get to a final look and functionality before going to futuristic features.
trus me that the next version will not take years ( it is under design right now but i have my real day job to attend first, this is only a hobby)
keep on and buzz me if you need anything
Thanks a lot, this ver works for me just finishing testing
good, i'm happy.
enjoy it and please send feedbacks on your experience
comeback to see if there is a newer version
send your friends too...
BTW - what device you use ?
very impressed....
tested ..MemoMe ..on my blackstone with standard rom ,working very ..very smooth for me ..!
for me, it is very handy, for reasons, you also set out and more ( if you just want to be a bit lazy, in typing short email ,this is it ! )
thank you
thanks Willcor, really pleased to hear that.
it did not come out of being lazy it came out of a real need - say you are driving or just walking, you just remembered something or were told something you do not want to forget... i operate it over a voice command so when i drive i just call the app by its name - record and send...
next will come as said a photo attachment so you will be able to take a pic add comment and send.
next will come third party reciever...
and i hope to add a voice recognition to so you can dictate...
have fun
ZeevG said:
good, i'm happy.
enjoy it and please send feedbacks on your experience
comeback to see if there is a newer version
send your friends too...
BTW - what device you use ?
Click to expand...
Click to collapse
I am using a Blackstone
Mr.Naresh
Dear ZeevG,
NoteMe Working nice.
One query , if i record the note and exit without sending, will the note save anywere or it deleted automaticly ? and if not deleted can i listen and send it in next time login.
Please reply.
Regds
Naresh ( India )
ZeevG said:
hi all,
after a long time where i had so many tips and software solutions from this community it is about time a put something back to it.
i have been looking for an application to allow me record a voice memo and send it to myself as a reminder with a voice clip attached.
found a commercial program that did not do it as i wanted so had decided to do it myself.
MemoMe is a light application that enables you to record your memo when you just got an idea or remembered something you do not want to forget, like when you drive or just do your shopping... it goes to your mail or your secretary mail etc. easy to use and configure. it supports all WM devices and all screens.
you can use your SMTP direct sens or use your mobile outlook to send it for you (mainly for security reasons nor to expose smtp user and password if you are concerned). as said it is offered as a freeware to all as a tribute to this wonderful comunity.
as per donations etc - is you feel like donating, please think of someone who really needs it like poor children etc or donate to charity.
a nice thank you is much more than i need.
there is a CAB download link and EXE link for those who prefare.
http://cc4biz.com/Downloads/MemoMe_Setup.exe
http://cc4biz.com/Downloads/MemoMe.CAB
have fun...
OK, the first official release is now available for download.
change log from the pre - release:
- UI was completely changed.
- many internal engine changes
- sound effects were added
- the send engine was totaly changed and due to security reasons there is no direct SMTP support at all. the only mechanism supported is sending the Memo using the internal outlook engine. any existing account can be used and the configurator shows all available options. in the older version there was a need to provide your SMTP server, username and password - not very good for security...
this way no sensitive data is stored to be a potential risk.
if i will find a way to use a public service or any other option were no info will be stored i will consider.
setup & update procedure:
just download one of the setup packages either EXE or CAB and install it
if you have installed any older version i recommend you uninstall it and delete the folder to make sure nothing is left behind
run the config utility and just follow the few selections and save.
very easy to use and nothing to write a manual for
now you can use the MemoMe app and enjoy !
for any questions or requests or ... just let me know
may you all have a great weekend
Click to expand...
Click to collapse
of course - if you record and not send or the sending failed the memo is still stored in memory - usually the file is in the program folder so easy to find.
next time you run the app you can listen to the record and send
if you try to record when there is an unsent memo you will get a worning and then can choose to overwrite or go back...
Using it on my touch diamond2, it works like a charm, thanks!
just two simple questions:
1) does it sync with outlook?
2) can the voice memos be attached as tasks?
thanks a lot for your fine work!
two simple answers:
1) if you meant pocket outlook - the answer is yes - it uses outlook to post your email to yourself. if you meant pc outlook - no need to as your pocket outlook should sync to your desktop. MemoMe then sync to pocket
2)no. the voice memo goes as an attached file via email to your inbox, that's what it says in first place.
Nice software.
But
When Sound Effects are off it still plays some sound when it starts, buttons pressed etc.
If you wait until max recording time in pilot mode it hangs. It draws blue line till screen end. You press hand button. Button become a clock. It again draws blue line till screen and hangs.
oops, i will check it out ASAP
anyways there's a new version in the oven just about to be ready
thanks any how for your comment
That is great - I'll wait for new version
Could you implement pause button? So one could start recording, press pause and then continue recording to the same file?
Related
Hi,
Perhaps it's not my place (Being a newbie )but thought this forum could do with a dedicated thread for comments regarding what software works on the Monet/Lobby and how to load it in.
What software is crap and what software is spectacular.
And where to get it and is it FREE!
I'm sure that I and others will visit frequently for the latest views & opinions.
Just for starters here are some truly FREE ringtones.
Just need to give 'A' email address. Dont bother with Email just download and use 'back-Arrow' to get them all.
Enjoy.
https://www.microsoft.com/windowsmobile/domore/ringtones.mspx
My 'must have' apps
1. Sprite Backup Personal Edition (Version 5.2.0) - very handy for backup and restore of your Lobby. You can create self-extracting restore 'exe' files on your micro-SD card 'just in case'.
2. Tom Tom Mobile (Version 5.200 (4450)) - brilliant Sat Nav.
3. Automatic Keylock (v3.87) by Danny Baumann. The normal Windows keylock (pressing the Red Hang Up button) doesn't work that good for me. When someone calls you, I had the nasty habit of answering the call before I could see who it was, or even cutting many people off when taking the phone out of my pocket. This app gives you a screensaver that locks the keypad down a little better.
4. RealDice Mutliplayer Championship Poker (Version 4.24). Like playing Texas Hold'em? Why not play against other people over GPRS internet connection? I love this game. Even the AI in the single player is very good. The running costs (in terms of KB playing over the WAP/GPRS) isn't, surprisingly, that much.
5. Avantgo - Sync up all the latest news for your long commute to work.
6. Resco Smartpack - contains System Toys (battery / memory status), Photo Viewer, a more powerful Explorer application and a registry editor. I know that you can get some of these for free, but this pack is trouble free and very well written.
7. TCPMP (aka BetaPlayer) - One big drawback for me is that Windows Media Player doesn't allow you to easily Fast Foward through your movies or music when you are playing them. TCPMP can do this plus it is a fab media player, and there are many other codecs available to play non-Windows files too.
8. CellDoom - If you are as old as me and remember playing Doom on your old 386 then get yourself CellDoom. Dig out your old Doom WAD files and drain your battery playing this
9. Jeyo Mobile Extender for Outlook (Windows Mobile Edition 2.5 (Build: 1258)) - Wish you could text as fast as the Young Guns? If you've got Outlook and a Smartphone then get this. Jeyo Mobile Extender for Outlook allows you to send SMS from your PC (via ActiveSync / USB connection). It will sync up all your Sent, Received and draft texts (SMS messages) on your Outlook too. Excellent for quick, long and multiple recepient messages.
10. Breaksoft Mobile Registry Editor. A PC based application that allows even easier registry access to your Smartphone.
Some of the above applications are free, others you will need to purchase. All can be found via Google
Only the "Automatic Keylock (v3.87) by Danny Baumann" requires the Lobby to be unlocked.
Excellent start to this list ringp3ace.
will def be trying some of these out.
you didn't mention whether or not Lobby needs to be unlocked first though.
Press-E-Dent said:
Just for starters here are some truly FREE ringtones.
Just need to give 'A' email address. Dont bother with Email just download and use 'back-Arrow' to get them all.
Enjoy.
https://www.microsoft.com/windowsmobile/domore/ringtones.mspx
Click to expand...
Click to collapse
While you're there why not get the free golf game too? Download the landscape phone version though as this will run full screen on a QVGA smartphone.
shuflie said:
While you're there why not get the free golf game too? Download the landscape phone version though as this will run full screen on a QVGA smartphone.
Click to expand...
Click to collapse
Thanks.
Was in too much of a hurry to get some decent tunes and didn't notice that one.
Good game.
I'm developing an app to allow users to query HUKD from their mobile (over using the mobile website as a quicker and should be less bandwidth intensive & skin to windows mobile also)
Now Using FreewarePocketPC for hosting, should be on O!Market shortly
The latest version will always be here:
http://www.freewarepocketpc.net/ppc-download-hotukdeals-for-windows-mobile.html
.Net 3.5 Compact Framework is required for all releases
http://rapidshare.com/files/274015365/NETCFv35.wm.cab
Version 1.0.0 Released: 31/08/2009
http://forum.xda-developers.com/showpost.php?p=4440622&postcount=8
Version 1.0.1 Released 02/09/2009
http://forum.xda-developers.com/showpost.php?p=4453966&postcount=10
Version 2.0.0 alpha Released 21/01/2010
http://forum.xda-developers.com/showpost.php?p=5419240&postcount=37
v2.0.0 is not tested, although based on v1.0.1 it works in a different way, use at your own risk
Please try it out and let me know if you have any feedback as I would like to welcome all comments and criticisms to help improve my software
Hell yeah! <3 HUKD I'll gladly be a beta tester for you.
evorgevol said:
Hell yeah! <3 HUKD I'll gladly be a beta tester for you.
Click to expand...
Click to collapse
Cool thanks
I need to sort out how I am going to show the results (the request/receive should be done tonight) then it's into beta and I'll try to figure out how to make a cab then get it sent out
Flibb from hexus here, count me in
A quick update
The search page is done (I'm going to add a search field after the first release, want to get a working product out first) and I am sorting out the data at processing it currently (when you click on an item it loads a new page with more info on it then you can open in a mobile bowser or go back to the results)
I'm ALMOST there guys, I have got to sort out the xml still and embed a browser in a new window to show more details on a deal... or I will sort out my own way around it
And another teaser screenshot, I have added support for tags (The search function works great right now, does all the filtering correctly.... BUT I am dealing with the returned XML currently)
Unfortunately you can only use 2 words as anything non alphanumeric is converted to '-' or the API wont recognise it but i'm working around it so you can use as many tags as you want (Just fixed this actually)
So I have the returned data to sort then it should be go I am going to add a 3rd screen where you can get more details on an individual deal (and load in an image of the product)
That is on a 240x400 screen so an Omnia should be fine
If anyone has dealt with DataSets and how to organise it in a ListView please let me know, I'm trying to deal with it right now and it's a PITA as I haven't used it before
If you need webspace; PM me
Version 1 finished
Full zip:
http://rapidshare.com/files/274021499/HotUKDealsInstaller.zip
Download the zip file, you need to install the net 3.5 Compact framework to be able to use it
Individual parts:
.Net 3.5 Compact Framework:
http://rapidshare.com/files/274015365/NETCFv35.wm.cab
HUKD 4 WM Cab Installer:
http://rapidshare.com/files/274015512/HotUKDealsInstaller.CAB
(Installer is a bit hobbled right now, need to load from program files>HotUKDeals on the device memory, will work on this to fix)
Known issues:
Speed (will work on next fix)
Bandwidth (will work on in next fix due to large numbers of results)
Installer fixes needed, so the registry is properly added, can access from the programs menu instead of having to navigate to the folder
Add an uninstaller (atm just delete the file)
Please link to this thread instead of hotlinking if you wish to share with others please
finlay666 said:
Version 1 finished
Known issues:
Speed (will work on next fix)
Bandwidth (will work on in next fix due to large numbers of results)
Installer fixes needed, so the registry is properly added, can access from the programs menu instead of having to navigate to the folder
Add an uninstaller (atm just delete the file)
Please link to this thread instead of hotlinking if you wish to share with others please
Click to expand...
Click to collapse
Just installed and everything seems to be working well for me!
If you want any help with the installer and stuff, then I can try my best to help! Just PM me
Thanks for the app!
~evorgevol
Just finished off v1.0.1, more some incremental changes than anything else. Thanks for the comments from some of the people that have used it
v1.0.1
Changes:
- Fixed installer (app shows up in programs menu as HotUKDeals (with the icon )
- Warning if you get no results instead of loading a blank page
- Slight redesign of results menu (the description at the bottom only shows when you have selected a deal
http://rapidshare.com/files/274779810/HotUKDealsInstallerv1.0.1.CAB
installed and working a treat on my topaz
Cheers
Apologies for not keeping this more up to date, some good and bad news...
Good:
I just got back from holiday
I have plenty of ideas for things to try out for improving the application
I won the category I entered for the contest it was for
http://www.hotukdeals.com/rest-api/contest
Bad:
Obviously being on hliday means no development work done since last update.
Resuming studies in the next few weeks for my degree so it will be much more of a side project as I work on my dissertation
I have had very little feedback on it To be honest I want as much critical feedback as possible.
I'll be working on my own web hosting to avoid reliance on Rapidshare also (I want figures for dowloads of each version etc and having this project on multiple forums means keeping track can be very difficult!)
Thanks for this handy little app works great for me running 6.1 21054
htc prophet
Works on HTC Touch HD, wvga, standard WWE 6.1 ROM
Really like this app, was looking for a PS3, think I may have found one for a good price
Bump to the update, I am going to have some time, I plan to add
- Option to go direct to the website via the link in the page (I have figured out what it is)
But I'd like to know if anything needs to be fixed, if there are any negative points please tell me as I will have some time next month to fix them (got sick leave for a number of weeks due to an upcoming operation)
Been trying to download from rapidshare, but will not let me do so unless I join up, as "no more free slots available"!
Any alternatives?
Apk1 said:
Been trying to download from rapidshare, but will not let me do so unless I join up, as "no more free slots available"!
Any alternatives?
Click to expand...
Click to collapse
Worked fine for me on 1.0.1 and the .netCF cabs if you try it again as a free user
Now working, it appears rapidshare blocks free users when it is busy.
Thankyou.
WinMo 6.5 on HTC Touch HD.
App works great, nice and fast, love it.
Cosmetic suggestions:
On the 1st page, maybe make the menu options more finger friendly?
On the results page, maybe split the backgound a bit, like with lined results, which highlight when selected.
Also when selected maybe add a lond decription and the small image?
Badly formatted rough mock up:
...and make the whole bottom part a URL link to the deal itself, like the "Go To Deal" button.
I'm on HotUkDeals EVERY DAY. I love a bargain me.
That looks like a decent suggestion, I have a lot on (doing some demo work on the 360 ATM as well as some big side projects) so I'll try and make the changes that I can seeing as it should be a fairly minor thing to do
I'll try the first page suggestions, will need to see what I can do from the button side of things
WMDreamRemote (WMDR) - with streaming
UPDATE (22/04/2012): No more deadlines. The reason is that I am busy with other projects. I might implement other features in future. You can download from my web-site, http://www.tillekesoft.com. There you can find as usual two versions. One version is for devices using 320x240 but it should work fine also with devices having a resolution of 640x480. For all other resolutions, please use the other one. For existing users, you just need to replace the old executable with the new one.
06/10/2010 - I have attached a "step-by-step"-guide for setting up WMDR - in particular what regards streaming (it is in English but you can use Google Translation-tools to translate it to another language). Hopefully, this will make it easier for new users to get WMDR working.
IMPORTANT (22/06/2010) - I just tested the new version of VLC no. 1.1.0 and it seems like WMDR is not compatibile with the latest version of VLC. So if you want to use WMDR, please ensure to use VLC 1.0.5 or earlier until I have resolved this issue.
Change-log: nothing so I am leaving old change-log here below:
This version is more like a Service-Release fixing some bugs and introducing few new features:
-fixed issue when using WMDR with Enigma2 outside your LocalLAN where WMDR passed on a DynDNS-address to the Dreambox instead of LocalIP-address which is the correct way. Thanks to mkbm for finding this bug.
-fixed streaming-issue in Enigma2 when changing between channels located on different transpoders would cause problems. Thanks to mkbm for explaining this.
-improved error-handling (clearer messages). Still to be improved further.
-possibility to kill stream when exiting WMDR
-other minor bug-fixes
-some optimization
-added a program-icon (it's very basic - if you can come up with a better-looking icon, please do so and post it here in the thread)
-fixed issue with DM8000
To see WMDR in action (using a pre-release of Beta 0.7), watch this video posted by XDA-user ajocius on YouTube:
Background: After on-going discussions in this thread http://forum.xda-developers.com/showthread.php?t=616353 regarding an application to control remotely the Dreambox, I decided to write an application to accomplish this request.
In above thread, a very simple and crude beta-application was posted. Now, the application has evolved further and therefore I reckoned it was more appropriate to open a new thread in this area which is meant for Window Mobile applications.
Extra Information: The Dreambox is a series of Linux-powered DVB satellite, terrestrial and cable digital television receivers (set-top box), produced by German multimedia vendor Dream Multimedia. It's "kind of" of open-source which has led many "teams" to develop so called "images" for this receiver as an alternative to the original one furnished by Dream Multimedia. In addition, many other hardware manufactures have produced their own receivers (some of them are actually clones while others are not) using the same concept of the Dreambox i.e. Linux-powered. The Dreambox has evolved during the years and many models are present on the market. The first ones are/were using a firmware called "Enigma" but, more or less, with the introduction of High Definition TV, a new firmware was released, namely "Enigma2". One of the "revolutionary" features of the Dreambox was that you can connect it to your local network and this opened up a whole new word compared to ordinary satellite-receivers. To get further information, just google for Dreambox or look it up at Wikipedia.
Background for the application: You can read the original thread mentioned above to get an idea why people wanted an application like the one I am releasing. In a few words: since you can access the Dreambox (or any other satellite-receiver based on Enigma or Enigma2) through your local network or through Internet, there are many things you can do remotely (at work for instance) such as handling timer-events, read EPG etc. The ideal way of doing it, especially if you don't have access to a PC, is to use a handheld device. It was brought to our attention, that there are plenty of applications to do what mentioned above already available for download on the Appstore for iPhone.
for instance:
http://appspace.com/apps/view/38502/idreamremote/
http://appspace.com/apps/view/40338/dreamon/
So, it was suggested to write a similar application for Windows Mobile. And here it is, still in beta although with quite a lot of features implemented, even Streaming-support.
Current Features:
-Streaming
-Remote Control
-Bouquets-/Channels-lists from where you can:
1) change channel
2) view EPG
3) set timers
-Controlling the receiver (Shutdown, Reboot etc)
-Supports set-up of multiple profiles (e.g. At work, home, bedroom)
-Supports set-up of multiple streaming-profiles (Local LAN, WLAN, mobile)
Known issues:
-is not compatible yet with old WebIf (1st generation) of Enigma2
-there might be some problems with certain characters not appearing correctly (please report if you have this problem)
-in 320x240 version when setting up Enigma-profiles, you might need to click twice in the various textboxes.
Features to implement in upcoming versions (not necessarily in this order):
- SMS (Send shortmessages to the TV-Screen)
- improve error handling further
- other ideas/stuff
- user-suggestions (your feedback for improvements)
- re-design the remote-control using png-images instead of jpg which should make the application a bit smaller (and require less memory)
- resolving above mentioned issues
- other bug-fixes
- support for other receivers - requests I have received are for D-box2 and IPBox HD (non Enigma)
- cosmetic issues
- Https (SSL) support. (tested and working but needs a specific hotfix-version of CF.NET (published by Microsoft) due to a bug in CF.NET)
Requirements:
-Compact Net Framework (2.0 should be sufficient)
-an Enigma-based receiver such as the Dreambox, IPBox etc..
-for streaming, please see second post below
Installation:
Note: I have not made any CAB-file.
Note2: If you want to keep your old settings and streaming-profiles, you may do so. Just replace the old WMDreamRemote.exe with the new one.
1) download the zip-file attached to this post and extract the files on your computer.
2) Copy the files into a directory of your choice on your device (internal or
storage). The files must be in the same directory.
3) Run WMDreamRemote.exe. The first time, you will get a message
saying "No connection....".
4) Choose Preferences/Profiles from the main-screen and ADD a new
profile inserting your data. Put the flag on default for the profile you use the most.
5) Then click Save Profile.
6) Go ahead if you wish to add other profiles.
7) You may delete my dummy-profile "home" (only after having added your own though) using
the Del-button. NOTE: It's important that there is always one profile present (with Default selected)
otherwise there might be unexpected errors
8) On the main-screen, you can now use the remote-control by selecting its button
9) You may also see a bouquet/channel list by clicking on its button. However, the first time the list will be empty. Therefore,
10). Go back to Preferences/Profiles and select the profile you want to use. Now select the
button named "Create Bouquets for this profile". This will take a minute or two. It will download
your bouquets and channels from your Dreambox. Do the same for each Profile you create.
11) Now you can scroll your bouquets ad channels.
12) Set up streaming-profiles (3 dummy profiles are provided for Local-LAN, WLAN and mobile) - see second post for more information
There might be some unhandled error-messages occasionally. They are mostly due to connection-problems. Just click on continue and retry unless you have indeed a permanent error with your connection.
Please test it and let me have your error-reports, feedback and suggestions for improvements. Please also indicate which device, Dreambox (or similar receiver) you are using and which image.
I must also express my sincerest thanks to XDA-user ajocius for:
-giving me access to Enigma2,
-his superb beta-testing,
-sharing his knowledge about streaming
-and of course for the great video he posted on YouTube (see above).
I have also attached some screenshots.
PS: ANDROID - Just a note to tell you that I posted here on XDA an Android-application for watching your Dreambox in streaming (LocalLAN and 3G). I called the application AndroidDreamer and you can find the thread here: http://forum.xda-developers.com/showthread.php?t=861145
If you want to test and discuss AndroidDreamer, head over to the thread. Please keep this thread for WMDR.
PS2: WINDOWS - I have published a Windows-version (WinDreamRemote or simply WinDR). You can find it on my web-site: http://www.tillekesoft.com
For discussions regarding WinDR, please use the thread mentioned on my web-site. This thread here at XDA is for WMDR - mobile version. Please respect this.
This is it for the time being.
STREAMING
Streaming works great for me, especially at home (in my Local LAN) but also at work (using WIFI) and even at the supermarket using a mobile-connection (3G) although the quality degrades.
For you, I don't know - Streaming may work, may work so and so or may not work at all.
It depends on a lot of factors:
-For Local-LAN: your WIFI set-up at home (11g, 54g etc)
-For WLAN or mobile: upload/download speed of your Broadband (normally upload-speeds are slower than download-speeds (ADSL)
-Your device
-Your computer acting as VLC-server
-not finding the right configuration in stream-profiles settings
-etc
What you need:
1) VLC (Videolan). Just Google for it and install it on your computer which will act as the VLC-server. I have only tested streaming using VLC running on Windows but it should work on VLC-servers using Linux and MAC as well. If it doesn't, please let me know. I have only tested version 1.0.5 of VLC so I am unable to say if previous versions will work.
UPDATE (22/06/2010) - I just tested the new version of VLC no. 1.1.0 and it seems like WinDR is not compatibile with the latest version of VLC. So if you want to use WinDR, please ensure to use VLC 1.0.5 or earlier until I have resolved this issue.
2) TCPMP (free and which you can find here on XDA) or Coreplayer (not free). Make sure that ASX-files are opened by the program you installed (look in the programs' settings for file-association). Some say that TCPMP is faster to load the stream (5-6 seconds in my Local-LAN) than Coreplayer. On the other hand, some say that Coreplayer is more fluid. The choice is yours.
3) A rather modern and fast device. It might work with slower devices as well but you may have to play a lot with your VLC-configuration (bitrate etc) before you get it to work
4) and of course WMDR
How to set up everything:
1) install VLC on your computer which will act as the VLC (streaming) -server. Then under the menu, select "View" in the English version (not sure since I have it in Italian) and then select "Add Interface" and finally you select "Add Telnet-interface". If you haven't changed anything, the default password for Telnet is admin and the port in use is 4212. That's it. VLC must be running to get streaming working. There are options to install VLC as a Windows Service or you can create a bat-file to be executed upon launch of your VLC-server. I guess similar options are availabe on Linux and MAC as well.
2) if you are going to use streaming outside your Local-LAN, you must ensure that you have set up port-forwarding correctly in your router. You must ensure that the WebIf can be accessed. You must ensure also that port 4212 (for Telnet) is opened and forwarded to the VLC-server. The same goes also for the streaming-port on the VLC-server which TCPMP/Coreplayer needs to access to receive the stream. So, basically you need to set up port-forwarding for one port for accessing the WebIf of your Dreambox and two ports for accessing your VLC-server.
3) A typical VLC-command to get streaming going is as follows:
Code:
vlc.exe" -vvv [url]http://192.168.1.130:31339/0,0025,0384,0385,0295[/url] --sout #transcode{vcodec=MP4V,vb=384,scale=0,5,acodec=mp3,ab=64,channels=1,deinterlace}:Duplicate{dst=std{access=HTTP,mux=ASF,dst=192.168.1.12:8085}}
Here are some explanations:
- the part "vlc.exe" is handled by WMDR using Telnet. You don't need to anything except for filling in information regarding the IP-address of your VLC-server, its password and which port to use.
- the part
Code:
"http://192.168.1.130:31339/0,0025,0384,0385,0295"
is your dreambox-ip, the port used for streaming and some channel-parameters. These parameters are handled automatically by WMDR and do not require your attention
- the part
Code:
"#transcode{vcodec=MP4V,vb=384,scale=0,5,acodec=mp3,ab=64,channels=1,deinterlace}:Duplicate{dst=std{access=HTTP,mux=ASF,dst="
is the one you have to insert in WMDR and which you need to experiment with to get the best picture/quality/fluidity according to your connection-speed. WMDR is pre-installed with 3 examples which are working on my HD2, my WIFI (using 54g) and my ADSL with an upload speed of 512kb. You can use those as an example and then modify them according to your needs.
- the part "192.168.1.12:8085" is the IP of your VLC-server and the port which TCPMP/Coreplayer should connect to in order to get the stream. You fill in this information in the stream-profiles.
With this information, you can set up your streaming-profiles in WMDR. In the streaming-profiles, you will find an additional setting called "VLC Sleep Delay". You can leave it at 200ms as its default-value. This parameter is used by WMDR when "talking to" VLC via Telnet. If the connection is very slow, you can increase this value but normally, even on Mobile-connections, the value of 200ms is OK.
Above information should get you going.
If you have problems with streaming, look at the points mentioned above since it is unlikely due to WMDR itself and that I can do anything to resolve your problems.
Good luck!
TIPS AND TRICKS:
-To make TCPMP open up automatically in full screen mode, you can do the following registry-edit:
Code:
HKEY_LOCAL_MACHINE\Software\TCPMP\PLAY
DWORD 123
Change value from 0 to 1
-For associating the file-extension ASX with TCPMP, do as follows: In TCPMP it is under:
Options -> Settings (you need to scroll down to see that option) - > Click button "Select Page" - > File Associacions
Click to expand...
Click to collapse
-As far as I have understood, TCPMP has been discontinued but there are some people updating it from time to time. If you have problems viewing the stream, it may (perhaps) be because you are using an old version of TCPMP. Here are two links to TCPMP which I have found working on my HD2:
http://forum.xda-developers.com/showpost.php?p=5657963&postcount=1
http://forum.xda-developers.com/showpost.php?p=5685536&postcount=1
TROUBLESHOOTING
- If you get errors in TCPMP (unknown file format, crashes) or if you don't see anything at all, you can try the following to trace where the error originates:
Select Stream in WMDR and if you get an error message from TCPMP, just disregard the error and put your device on the table or wherever. Don't click on anything. Don't kill the stream. Now, in the folder of WMDR on the device, you should find a file called WMDR.asx. Copy this file to your desktop (on a PC). Go to your PC and right-click on WMDR.asx and choose "open with" and select VLC (it will open another session of VLC). If you now can see the stream from your Dreambox on your computer-screen, then it means that WMDR comunicates correctly with VLC and most likely there is a problem with TCPMP/Coreplayer or because the file is too large/complex to be seen on the device. If you don't see anything, then probably there is a communication-problem between WMDR and VLC. Check IP-address, Port and Password of VLC.
- Make sure that streaming actually works between your Dreambox and VLC (without using WMDR) and that you can watch the streams on your computer. You can test this by using the web-interface of your Dreambox or you can search internet for instructions. If you have problems (can't see anything at all, bad quality, buffering-problems etc), then the problem itself lies with the source and there is no way streaming will work in a satisfying way. For instance, it has been reported that cheap (clones of) DM500 might have problems with streaming.
is this like a remote control app for any settop boxes and tv's that uses ir port or is it limited to the Dreambox?
Sorry - it's not using an ir port.
The application controls the receiver through the receiver's web-interface or through telnet.
However, the application could probably be used with (and modified to support) other types of receivers as long as there is a way to communicate with the receiver via local network, wifi, data-connections or Internet. If anyone is interested, please let me know.
trickbiker121 said:
is this like a remote control app for any setop boxes and tv's that uses ir port or is it limited to the Dreambox?
Click to expand...
Click to collapse
tilleke said:
Sorry - it's not using an ir port.
The application controls the receiver through the receiver's web-interface or through telnet.
However, the application could probably be used with (and modified to support) other types of receivers as long as there is a way to communicate with the receiver via local network, wifi, data-connections or Internet. If anyone is interested, please let me know.
Click to expand...
Click to collapse
sorry this isnt the app that i thought it was sorry to bother you
Hi Tilleke
Very nice looking release. I'm really happy with it!
i have tested it and here are my results:
Main screen > remote controle > page 2 > the numbers are not working here.
Main screen > preferences > Create bouguets > This option crashed my dreambox with a blue screen like windows always do...
Remember this is NOT a comment, this is only to help you with this great app!
Great Job, keep going... and i will be waiting till next release.
Thanks for testing and posting your results.
Can you please let me know which receiver you have and which image you are running. And on which device did you test it?
Will check this better.
citychannel said:
Main screen > remote controle > page 2 > the numbers are not working here..
Click to expand...
Click to collapse
When creating the bouquets, did you follow the procedure written in the first post? I am saying this since that part is not fool-proof yet. Did you reach the point when a message appears indicating "Update ready" or did it crash before. BTW: I have never seen a crashed dreambox with a blue screen I'd love to able to reproduce that error
citychannel said:
Main screen > preferences > Create bouguets > This option crashed my dreambox with a blue screen like windows always do.....
Click to expand...
Click to collapse
Thanks!!
citychannel said:
Remember this is NOT a comment, this is only to help you with this great app!
Great Job, keep going... and i will be waiting till next release.
Click to expand...
Click to collapse
Hi there
1) I have a dreambox 7025 with enigma on it
2) i didn't saw ' update ready' the DM crashed 4 seonds after i pressed the 'Create Bouquets for this profile'
A new 'bug' i found is the time out bug. This error appears randomly after zapping between channels or using the volume buttons.
Good luck and thanks!
thanks for your report.
1) OK, you've got DM7025 and running Enigma(1). Are you using the original image or have you flashed another image such as Gemini, Nabilo...If yes, which one?
2) Can you access the WebIf of the DM7025 using your local network and using a normal web-browser? In your browser, you should use:
Code:
http://ip-address of DM7025:port
it should then ask you for a user-name and password, normally root and dreambox.
example:
Code:
http://192.168.0.83:8888
If you are using the standard port (80), it could also be:
Code:
http://192.168.0.83
When you are connected to the WebIf and clicking on ZAP, can you see your bouquets and channels?
3) The time-out bug: What message do you get. Can you please transcribe it? Does this happen when you are connected using WIFI or when you are connected using the data-connection of your phone-provider?
4) what device are you using?
Sorry, but I need above information otherwise I really don't see how to track down the errors you mentioned since I can't reproduce them on my system/device.
PS: I confirm that the numbers on the 2nd screen don't work. I forgot to enable a few lines in my code. Will be corrected in next version. Thanks for finding out.
citychannel said:
Hi there
1) I have a dreambox 7025 with enigma on it
2) i didn't saw ' update ready' the DM crashed 4 seonds after i pressed the 'Create Bouquets for this profile'
A new 'bug' i found is the time out bug. This error appears randomly after zapping between channels or using the volume buttons.
Good luck and thanks!
Click to expand...
Click to collapse
Hi, working on my hd2 with dreambox 7000 S (gemini 4.6).
But one issue: The programm can´t display the german letters ä, ö and ü (in programm-list and bouquets)
Glad it works.
Thanks for reporting the problem with the German letters. This probably means it would be a problem with other characters as well. I will check this issue and see if I can correct it in next release.
Bib_x said:
Hi, working on my hd2 with dreambox 7000 S (gemini 4.6).
But one issue: The programm can´t display the german letters ä, ö and ü (in programm-list and bouquets)
Click to expand...
Click to collapse
Can you add support for modacos´s apptodate?
http://www.modaco.com/category/332/apptodate/
http://forum.xda-developers.com/showthread.php?t=327990
Hi Tilleke,
1) Im running Enigma with Gemini on it
2) Yes i’m using Webif and i can zap normally without lag or error (192.168.1.12), so port 80
3) I am using a WIFI connection and after 2 or 3 times pressing downwards in bouquets it comes with this error:
An error occurred on sub_modcommon_executeurl
Response code -1
Timeout
Continue?
4) i am using a HTC TD2 with WM6,1 pro
Thanks in advance
The num pad on second screen isn´t working. Only the buttons on bottom (tv, radio, text, help) are working.
Thx for the suggestion. I'll see what can I do.
Bib_x said:
Can you add support for modacos´s apptodate?
http://www.modaco.com/category/332/apptodate/
http://forum.xda-developers.com/showthread.php?t=327990
Click to expand...
Click to collapse
Yep. Already reported by citychannel. See first post under known issues.
Bib_x said:
The num pad on second screen isn´t working. Only the buttons on bottom (tv, radio, text, help) are working.
Click to expand...
Click to collapse
Thx for the information. This will facilitate tracking down the error and how to resolve it.
citychannel said:
Hi Tilleke,
1) Im running Enigma with Gemini on it
2) Yes i’m using Webif and i can zap normally without lag or error (192.168.1.12), so port 80
3) I am using a WIFI connection and after 2 or 3 times pressing downwards in bouquets it comes with this error:
An error occurred on sub_modcommon_executeurl
Response code -1
Timeout
Continue?
4) i am using a HTC TD2 with WM6,1 pro
Thanks in advance
Click to expand...
Click to collapse
Thanks for your work
im a db fanatic and currently working on e2 image let me know if you need any help.
One small request:
Would be possible in future release to add a DyNdnS address facility ?
It already works...
I have a profile called "away" which I use to set timer-events when I am not at home. Set up a new profile and in the IP-address-field, just write your DynDNS-address and in the Port-field the port you are using.
You might, of course, need to enable portforwarding in your router-settings.
Hope this helps.
^^MeX^^ said:
Thanks for your work
im a db fanatic and currently working on e2 image let me know if you need any help.
One small request:
Would be possible in future release to add a DyNdnS address facility ?
Click to expand...
Click to collapse
A little bit offtopic:
Do you know which ports i have to forward in my router if i want to stream my dreambox-tv-program over internet with vlc?
Streaming in LAN works well, but i want to watch TV outside my home, too.
So I've been working on a Dropbox client for Windows Mobile called "DroppedBoxx".
Now this Thread was originally started to get feedback from a few Beta builds I did also to offer support to users. Now that its a paid app I will continue to offer support and update the changelog I'm just not allow to promote it. (or link to where its being sold)
Also, I have done a bit of a writeup about how to use it (and what all the buttons do) on my Blog here (Updated to v1.1)
Features (Currently)
Login (of course)
Sync selected folders from Device
Browse Dropbox files and folders
Download Files
Download then email
Upload files
Take photo and upload
Delete Dropbox Files
Save Login/Session details
Copy/move files around dropbox
Create new Folder
Display account usage (numbers are there but a graph would be better)
Track application (self) usage
See Roadmap/Changelog Post 2
Tested Resolutions (in order from most tested)
VGA (480x640)
WVGA (480x800)
QVGA (240x320)
Beta Version: v0.7.1
Screenshots
Follow me on Twitter:
Reserved: Change log does here...
v1.7+: (Future)
Progress bars for Uploading/Downloading
v1.6: (Next release)
Rewrite to a lot of the sync feature (slower but better functionality)
More bug fixes
v1.5:
Few bug fixes
Note: there was a problem with the Marketplace version of this update which causes the update to fail.
v1.4:
Added the ability to open a file with the default application after its been downloaded
Fixes Login bug (oauth_timestamp) caused by API changes
Fixed bug where application adds a newline to the end of uploaded files (makes .cab installers corrupt)
Fixed bug where subfolders were being deleted unexpectedly
Fixed bug where selecting a file then creating a folder turns the file into a folder and creates a folder inside there
v1.3:
Fixed bug in syncing where creating new folders causing nothing to be synced in that folder
TimeZones are now fixed so syncing works properly across different timezones
Pressing the Back button in the Dropbox browser goes "up" a directory (instead of crashing )
Code refactoring/Optimizing to speed up syncing a bit
Added File size to files in the list in the dropbox browser
Fixed some error handling with a few things
Alternative theme with more of a Dropbox colour scheme
v1.2:
Sync Status screen to show progress when syncing (current file/folder amount uploaded etc.)
Fixed error when connection is dropped while browsing Dropbox folder
Fixed bug where sync folder no longer exists (Also asked to be removed if attempting to browse it)
Fixed NullException errors while syncing a new folder to Dropbox
v1.1:
Two-way syncing
some UI Tweaks (all bottom menus have labeled buttons)
Back Button added to Dropbox Browser to take you directly back to the sync folders screen (Instead of going back through each folder again)
Camera Settings goes upto 5MP now (VGA, 1MP, 2MP, 3MP, 4MP or 5MP) (again Subject to suggestions)
Fixed some errors to do with lost connections
Sync Folders screen is updated when syncing is complete (v1.0 only refreshed when the button was clicked again or the screen reloaded)
v1.0: (First Paid-for release)
One-way syncing (Phone to dropbox)
v0.7.1: (Last Free Beta)
Fixed bug in email attach (now working again)
Added setting for camera Resolution (VGA, 1MP, 2MP or 3MP) (Subject to suggestions)
v0.7:
Added labels to the buttons on the homescreen (other menus to follow if feedback is good)
Upped the camera resolution to 2MP (will work on getting the devices max or allowing user to set this)
Added background uploading to the camera-to-box feature (bigger images take longer )
Added application data usage to the info screen (resets when you close the app)
v0.5.4:
Fixed bug: Error handling files bigger than 2,147,483,647 bytes
Fixed Icons looking terrible (now they only look average)
v0.5.3:
Login screen now has an average looking background!!
Changed the "Remember Me" function to store the tokens instead of user info (Dropbox prefer) Also this now acts as an auto login. (Everyone will have to login again, sorry )
Added an "Exit" (door) button to the Sync Folders screen to Exit the app instead of having to logout then exit (Requested)
Info/About screen added with DroppedBoxx version number and Dropbox account usage (Quota, used, shared. Note: The actual usage is the used + shared) Will work on a graph or progress bar thing for this
Added the settings screen (at the moment all it does is let you "Forget Me" to stop the auto login/remembering password)
more but i forgot...
Trimmed...
Thanks for sharing!
I have DropBox already installed on my pc sometime back. Your app is a god-sent.
Thank you for sharing
EDIT: Something wrong on the last two items. See attached.
illi said:
I have DropBox already installed on my pc sometime back. Your app is a god-sent.
Thank you for sharing
EDIT: Something wrong on the last two items. See attached.
Click to expand...
Click to collapse
ahh, WVGA.
What phone do you have there? (Im guessing the Topaz)
I think there is a problem with the Upload file/save file selection screens under that resolution, looking into a fix.
Thanks for the feedback tho, exactly what im after
d1k_is said:
ahh, WVGA.
What phone do you have there? (Im guessing the Topaz)
I think there is a problem with the Upload file/save file selection screens under that resolution, looking into a fix.
Thanks for the feedback tho, exactly what im after
Click to expand...
Click to collapse
Yes, Topaz. Looks very promising.
Edit: 0.3.9 rectify the display issue.
There is another bug when choosing to install to sd card it installs to program memory, under \program files\ it doesn't even create its own folder.
gorelshv said:
There is another bug when choosing to install to sd card it installs to program memory, under \program files\ it doesn't even create its own folder.
Click to expand...
Click to collapse
hmmm, im not too good with cab installers.
Does anyone know how to fix this?
Very nice app
To the OP:
To fix the installation to SD card issue: Actually i was incorrect still looking for solution
Couple of suggestions: no popup keyboard symbol ...at least on my tp2. I use my popup more than my hardware keyboard so might want to look into that.
I am also sending you a pm.
aestivalisakito said:
Very nice app
To the OP:
To fix the installation to SD card issue: Actually i was incorrect still looking for solution
Couple of suggestions: no popup keyboard symbol ...at least on my tp2. I use my popup more than my hardware keyboard so might want to look into that.
I am also sending you a pm.
Click to expand...
Click to collapse
Thanks for the Tip, i'll look into it tonight.
As for the popup keyboard, I wasnt too sure about it as i wanted the app to be full screen and since my Touch Pro is only VGA it needs all the room it can get. I'll have a think about it, maybe just have it for the login panel/inputs?
Cloudfile Dropbox isn't free, you app is free, so...thanks for your job!
zinconnu said:
Cloudfile Dropbox isn't free, you app is free, so...thanks for your job!
Click to expand...
Click to collapse
Free for now, might make it paid when its better.
But I will most likely offer it free to any Beta Testers (or members who post here with feedback)
Hello, d1k_is! Thank you for the program. Staged DroppedBoxx, Play around. We should have a nice icon to the label screwed.
The first issue that is not possible to enter data for authentication because there is no keyboard. I use HTC HD2.
delete msg
Icons for you
On a Touch HD i can't login due to missing Keyboard.
But the idea is still great
fwt said:
On a Touch HD i can't login due to missing Keyboard.
But the idea is still great
Click to expand...
Click to collapse
hmmm, its been said before and i can do this, but its just a matter of how i make the keyboard appear and disappear.
Appear Im guessing on Textbox Click/Select but disappear...?
Any ideas from the keyboardless users?
Maybe a litte keyboard button next to or under the textboxes?
EDIT: I have added a button and uploaded a new version, feedback please...?
Also, i'll update screenshots when i get a chance (and add the icon, thanks for that BTW)
Thread moved to development.
d1k_is said:
Free for now, might make it paid when its better.
But I will most likely offer it free to any Beta Testers (or members who post here with feedback)
Click to expand...
Click to collapse
I understand. If you need a french translation for your app, don't hesitate to send me a pm.
I hope no-one minds but I got my Mozart yesterday and the only link that seems to talk about what is good and bad about it (here) hasn't had a new entry since November.
I also reckon that the Microsoft Developers know that xda-developers is the only place to go for sensible smartphone discussions and hopefully they will read this and make some changes.
I wasn't convinced that the Mozart would be better than my HD2 but actually....
Good:
Great Screen Resolution
Fast
Internet Explorer is better than I expected and the Pinch to Zoom is great
I like the start screen and the way the 3G signal gets out of the way
Bad:
No Comm Manager - switching on WiFi, Bluetooth, Flight Mode is a real pain
No Internet Sharing - AARRRRGGGHH!
Can't find my WiFi with hidden ESSID - GGGRRRRR!
No MyPhone Sync
I'm not sure I'm keen on the lock-down on apps - it's probably the only thing that will force me to Open Source Android.
I used gyrator2 to switch the screen off when I turned the HD2 vertically down - it saved on battery.
Thank goodness MS don't seem to have made WP7 into a steppingstone to a proper OS (like vista was to Win7!). The way I'm using it, it's the almost finished.
I'm hoping that someone will come up with a Comm Manager App. But I don't know about the other stuff.
Has anyone else got anything to add? What would make WP7 work better for you?
PS Please move this if it's duplicated elsewhere.
Thanks for the heads-up, just brought a Mozart today expecting delivery on Tuesday, I've come from the Android phones Galaxy S & X10 Mini, will be interesting to see how this shapes up against them.
anoyances
i also bought one and generally i think they realy solved the job doing a MS based phone that works. (i moved from a diamond2 with os6.5)
but what realy makes me angry is that i read in the commcersials and specs that i could use mp3 for ringtones (wich phones cant today anyway). but even if being a trivial requerent i would not go with out it.
now i realize that i can use mp3 - BUT ONLY IF I BUY IT FROM ZUNE WTF!!!!!
are they trying out the apple business plan?
im aware that i can "jail break" (where did i last hear about this.. og iPhone/apple) .. but i risk brick´ing my phone and thats a bummer.
still realy nice phone.
a file handler would be nice though and some grouping functionality. the start screeen cannot collect all your messaging and mail in a single icon for access. you have to add evry single one of them in the shortcut list for ease of access.. thats anoying if you have 4 mail and text messaging like me.. grouping would rock..
another thing is "People" its a looker if you want to see contratct and facebook updates, byt anoying for phone contact list
and whats it with the contact list? you cannot sync with outlook only exchange serveres. otherwise you have to expose your full contact list on windows live or facebook to get it synced to your phone.
now i believe i should be paid for using my phone then.. they get to know me and all of my friends including phone info, full name, job detaisl address etc etc. thats something that valueable.. and i dont get to choose if i want to take part.. i want money Zune/HTC and Microsoft!
im semi pleased .. nice phone but realy creapy business methods
A week later....an update
I can see what you're saying js0937.
I'm not really into changing the ringtone but I did notice that you couldn't do it. I can't believe that it has to come from Zune - it does make Android seem very attractive!
I've coped with the Outlook / Live syncing by having a separate account for my contacts but it is a bit long-winded.
I'm waiting for the update (due in Jan 2011 but when??? we're already two-thirds through!) to see whether these problems get solved.
Given that I worked with winphone 6.5 for so long, winphone7 is still much, much better but I still want Internet Sharing and a Comm Manager
tony_wh said:
I'm waiting for the update (due in Jan 2011 but when???
Click to expand...
Click to collapse
Update whill be soon (7 feb.?)
h..p://microsoft.com/windowsphone/en-us/features/update-info.aspx
Hoping the update sorts the voice dialing out as its rubbish compaired to 6.5. This is a big step back. Be nice to get more info of what the update will bring. Roll on the 7th, fingers crossed.
My 2 cents
Ye, here you have the list:
MUSTS (otherwise I will NOT use the phone for my business):
- Network sharing
- People view by company OR search by company
- copy paste OR use selected text as signature
- outlook categories (seriously!) sort/show calendar, ppl, by category
- tasks list
WANTS (It would be nice to have it):
- activesync with desktop (mailny notes, and such)
- messaging hub (it is enough to group it together in one tile displaying summary of all unread messages, no matter from where they come. It can link to selection screen, where I can pick the mail/messaging account).
- connect tasks with SharePoint lists
- see Active Directory coleagues callendars (or at least simple meeting assistant that shows free/busy for attendees)
- Remote Desktop Connection (it is a pity that having that screen I cannot connect to my virtual desktop if needed)
I am business guy, and always used WinMo as a nice tool. Now... I have waited so long for WP7 and I cant use it for work. I gave it to my Woman, and now I am considering other OSes...
Microsoft, you are pissing on your most loyal customer segment!