Having owned a TYTN and a TYTN2, I love HTC smartphones with keyboards. After spending a year with an Iphone 3G I have bought a Rhodium. The only problem is that I detest silver phones, so I have ordered one of thier OEM housings in black. I used a coupon code of TS20090701A for 20% off.
I'll post a teardown video and review of the housing once I receive it.
Those pics look to be the sprint version casing.
does this fit on the normal rodium here in the netherlands??
i like the backplate how much is it??
kable said:
Those pics look to be the sprint version casing.
Click to expand...
Click to collapse
Agreed.
I hope the OP doesn't have a standard Rhodium otherwise there may be a bit of a fitting nightmare when it comes to relocating the ExtUSB port because of the extra 3.5mm jack on the Sprint version!
wow i cant wait to see it opened up i have the t-mobile usa version and would like to know if i could change the housing, the people are right about that silver one bieng the sprint version but i think the black one on the sight is probly the oem htc touch pro 2. I tried to enlarge the pic and it didnt let me so i could not see the rear cover but on the red version the back was the same as the unbranded touch pro 2 good luck with the install i will subscribe. In any case has aanyone tried to open the us t-mobile version and see if the guts are the same as the unbranded version?
That case "looks" more like the T-Mobile one. Notice the Battery Cover, from what I can tell in those screen shots the stylus doesn't go through it like the Verizon/Sprint/HTC/AT&T versions. Of course it's not a true T-Mobile one because it does have the tapered edge around the screen (Bazel).
Its the Sprint TP2 housing.
http://www.new-cell-phones.org/sprint-htc-touch-pro2-pictures.html
kable said:
Those pics look to be the sprint version casing.
Click to expand...
Click to collapse
I have received the casing and there is no way to make it work with the T7373 model.
I have emailed the supplier and askerd for an exchange for the correct, albeit orange, model.
So far no response from the vendor...
I've emailed twice asking about exchange.
agitprop, what makes it impossible to adapt? Is it the shape of the T-mobile frame that won't fit in the other housing? Or is it the touchscreen?
If it's the touchscreen, you can buy an alternate version that will fit the Sprint housing, they're all over ebay for about US$30.
Be sure...
To notice that the one pictured above is yes the Sprint version but on top of that the Sprint version has both the mini-usb port AND the 3.5mm jack, so for a t-mobile touch pro this isn't going to work, or at least you'll have gaps.
I was looking at the silver one on their site and might go with it, since looking at the picture closely it appears to only have a hump on the back for the mini-usb port.
Buddy of mine has the Verizon version of the TP2 and I must say it looks a little nicer that the T-mobile one, it actually "looks" smaller as the edges are mor rounded off, hence why I'm interested in the silver on on that site.
Are there any other technical reasons why the case you purchased will not work? Please explain.
Vission
Related
My beautiful phone became ugly
The invisibleSHIELD for the original Tp2 doesn't fit the device simply because it's much and much taller, obeviously desined for another device.
I ordered one for my original (unbranded) TP2 and when i tried to instal the back shield that was a big screw when i discovered it's too taller to fit my device (how can it happen ?) the upper part toward the power button was ok but the lower part toward the mini usb does not fit it at all, i had to use a scissors to cut the extra material with a very ugly and uncomfotrtable result
I had to make a hole for the hand strap near the mini usb as the original one in the shield was suited on the mini usb and i cut it with the extra part.
I think the invisibleSHIELD for TP2 is good but for any thing else other than the TP2 itself.
Sounds like you just got the wrong on or something..plus I wold not do a whole body one, just the screen!
I am sure
The backage i recieved has a white sticker on it that says :
HTCTOUPRO2FB
HTC Touch Pro 2
Full Body
I got the Zagg all around body shield installed at the local mall and it fits just fine
you are speaking about the original TP2 or the branded one?
I'll try to post some photos to domestrate the problem.
I wouldn't go with any other brand...
meromar said:
you are speaking about the original TP2 or the branded one?
I'll try to post some photos to domestrate the problem.
Click to expand...
Click to collapse
I had an one on the G1 which my wife has now. I have it on my Hero and TP2, just the screen cover not the whole body one. I have a black gel case for the TP2. Mine is T-Mobile branded and I wouldn't put any other protector on my phones.
To be honest though it took me 2 tries on the g1 to get it perfect and 1 on the rest of the phones. It is frustrating but if you scrape and apply at the same time very slowly (kinda like window tint) it comes out great.
One more thing I got the universal as the shop I had did not have one for the TP2, they said it was to new. It was rather easy you just line it up to a grid and cut from there.
Does anyone know if Zagg's invisible shield or Bodyguardz' protective film for european Touch Pro 2 will fit ATT Tilt2? Thanks
I had a similar question. I have the EU version, unbranded, and am wondering if the form factor is the same as the AT&T model. The button placement on the front looks to be identical. Can you post a picture of your battery cover?
Here we go. Looks like EU TP2, except PTT button.
Thanks for the pics. You're right, it looks like my European model. I like the color of yours better though The form seems to be the same on the backside too. Hope someone can speak to your original question for you.
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
theskeels said:
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
Click to expand...
Click to collapse
That would be great! Anyway, i decided to experiment a little and ordered the full set from Bodyguardz. Will let you know as well how it works
I got a rubberized hard plastic shell designed for the European model and fits the Tilt 2 quite nicely. The only drawback is there is no cutout for the PTT button. Other than that I cannot find anything wrong with the European case being used with the Tilt 2.
Thanks for the info. That should indicate that on the outside at least the two shells are the same, with the exception of the PTT button anyway ( and maybe a forward facing camera on the EU model?). I'm thinking that the screen savers and clear vinyl "cases" will be mostly interchangeable between the two types as well.
Saw this posted on another forum. I don't have any experience with this brand myself, but looks familiar to the Zagg product and it is specifically for the Tilt2:
http://www.clearprotector.com/atandt-htc-tilt-2-extended-protector.html
If memory serves this is the company that I bought a similar case from for my Wizard. Thanks for the link. I've been using the case that came in my box and like it a lot. It's slim and provides sufficient protection. This protector should complement it well, and allow me to leave the phone out of the case while driving without having to worry so much about it sliding around and getting scratched up.
I just ordered one (extended protector), for my unbranded phone and will let you know what I think of it when I get it, as well as what they're customer service is like.
These cases can be tough to get on, and you have to accept the feel of the edges of the material when handling the device after installation. But they do provide a good grip to help prevent the slippery little buggers that our phones are from jumping out of your mitts. And the material is tough to say the least. Once they're on right, they stay put and do the job.
I just looked on the bodyguardz website and saw that they have a kit for the Tilt2 now. I should have it later this week. I will post updates once I put it on.
Don't mean to hijack......
Don't mean to hijack the thread but do any of you use either of these products with a leather pouch/sleeve like an EaseCase. I'm wondering if there will be any peeling issues when sliding the device in and out of the case.
Received the TP2 kit today, just applied it to the phone. Came out ok, but the only thing that doesn't match is the front camera hole, so I left the original protector on; and I had to cut off a small peice of protector from the side for the PTT button. Probably I will try another set from somebody else.
How did they work out?
theskeels said:
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
Click to expand...
Click to collapse
edskii said:
That would be great! Anyway, i decided to experiment a little and ordered the full set from Bodyguardz. Will let you know as well how it works
Click to expand...
Click to collapse
Did you guys have any success?
I just got a invisible shield for my tilt 2, just for the screen. It's designed for the OEM TP2, because mine had the tiny hole on the top right for the front facing camera, which the Tilt2 does not have. Other than that, perfect fit.
I like the new sponge that comes in the kit, easier to use than spraying the screen with the wetting agent.
For anyone interested in bodyguardz, now is a good time to order. They already include the 25% discount for Christmas and if you use coupon 155A6 you get another 20% off!!
p51d007 said:
I just got a invisible shield for my tilt 2, just for the screen. It's designed for the OEM TP2, because mine had the tiny hole on the top right for the front facing camera, which the Tilt2 does not have. Other than that, perfect fit.
I like the new sponge that comes in the kit, easier to use than spraying the screen with the wetting agent.
Click to expand...
Click to collapse
Does The Isheild cover the chrome painted rim around the screen? This is what gets damaged most readily (I Know I have dropped mine out of my pocket while ridding my bike on Highway 50 in Orlando, FL.).
Anyone please reply who has a Tilt2 & Zagg Isheild installed? Does it cover the chromium = )
No, it doesn't cover the chrome. For me the screen protector also didn't fit quite right. In the process of removing and reapplying it, I have now managed to stretch it out (which necessitated cutting around the speaker so I could hear) and got all sorts of fingerprints and whatnot under it, making it useless in sunlight.
Many of the major malls in the U.S. have "kiosks" that will do a custom install.
My buddy had his ENTIRE TP wrapped, including the chrome.
I wanted to make a new thread, but decided not to clutter the board and instead ask in a couple threads for some pictures. Can anyone with the Gadgetshieldz for the ATT Tilt 2 post some hi-res images so I can see what it looks like and how it fits around the corners and sides? Thanks
I am looking for a black hard plastic case for my AT&T Tilt 2. I have found several in clear, but very few in black. I came across the Cellet Proguard on eBay (http://cgi.ebay.com/New-HTC-Touch-P...wItemQQptZPDA_Accessories?hash=item25576f72bc) but the pictures as worthless.
Has anybody purchased this case or a similar one? More importantly, can you show me pictures of it installed on your AT&T Tilt 2?
Thanks!
this one?
I have tried several black rubberized hardcases for TP2 (VZW), including the Seidio innocase, but this one from Naked Cellphone is by far the best:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=300357171388
more pics here in a post I made about Tp2 cradles:
http://forum.xda-developers.com/showpost.php?p=4993317&postcount=26
Its a tiny bit thicker than the Seidio and is much better at protecting the phone from serious falls or bumps. Together with the screen protector Naked Cellphone sells, its a great combo.
While I do appreciate your reply and your pictures, you are using a Verizon version and the sole purpose of my post is for AT&T.
KevinACrider said:
While I do appreciate your reply and your pictures, you are using a Verizon version and the sole purpose of my post is for AT&T.
Click to expand...
Click to collapse
With a few seconds' browsing their store I found these.
I dont know if any of these will work for the AT+T version, but they also sell:
one for sprint TP2:
http://cgi.ebay.com/RUBBERIZED-BLAC...wItemQQptZPDA_Accessories?hash=item518d79938d
one for T-mobile TP2:
http://cgi.ebay.com/BLACK-RUBBERIZE...wItemQQptZPDA_Accessories?hash=item518cecaed0
one for plain vanilla TP2:
http://cgi.ebay.com/BLACK-CASE-FOR-...wItemQQptZPDA_Accessories?hash=item414a704371
Looks nice! shame there not shipping worldwide
Just curious if we could swap battery covers.
I have been wondering the same thing -- would the battery cover from a Verizon TP2 or Sprint TP2 fit on the GSM/AT&T Tilt2? The only thing I can see being a problem is the fact that CDMA models have the 3.5mmm headphone jack next to the mini-USB connector so the area where both of those are located might be a little wider than the GSM models.
Has anyone tried putting a CDMA battery cover on a GSM TP2?
According to this, the CDMA variants are a different size than the GSM variants - so my guess would be no, it won't work.
Thanks for posting the link. I actually went to a Verizon store tonight and held my Tilt2 upto their TP2 and I did notice that the piece where the headphone jack & mini usb are on the Verizon one is wider than the Tilt2, so combining that first hand experience with what's on the link you posted, it's pretty safe to say you're right.
GSM Touch Pro 2 Housing w/Rubberized Back Cover
There are several vendors selling TP2 housing sets on eBay and elsewhere, which include a rubberized battery cover. As far as I can tell, these all say they are designed for the T7373 version of the TP2, which I believe is the original GSM HTC TP2. I have the AT&T Tilt 2, which I believe is the T7377, but from what I have been able to gather, the housings are the exact same except for slight coloring differences.
First, can anyone confirm if indeed the battery cover from the original HTC GSM TP2 (T7373) will fit on a AT&T Tilt 2 (T7377)? And second, has anyone else out there bought one of these aftermarket housings and tried putting the battery cover on either of these two devices? Does it fit?
I REALLY wish HTC/AT&T would just sell an OEM rubberized cover -- better yet, wish they just included it on the device in the first place. Doesn't anyone test these things for usability before they ship them??? The phone gets warm from the battery, which in turn makes your hand sweat from holding it, which makes the stupid glossy cover even more slippery than it is dry. I don't get it, who is making these horrible design decisions -- AT&T? HTC? Sorry for venting!!
azwildcat98 said:
First, can anyone confirm if indeed the battery cover from the original HTC GSM TP2 (T7373) will fit on a AT&T Tilt 2 (T7377)?
Click to expand...
Click to collapse
Confirmed. I bought a T7373 cover, it fits my Tilt2 just fine. No PTT button, of course.
T7373 Cover fits T7377
Thanks so much for letting me know! Yes, I can live without the Push To Talk button.
Did you buy the genuine OEM one for the original HTC GSM Touch Pro 2 (the silver cover)? or did you buy one of the housing sets from the vendors in Hong Kong -- if so, which vendor did you buy from?
azwildcat98 said:
Thanks so much for letting me know! Yes, I can live without the Push To Talk button.
Did you buy the genuine OEM one for the original HTC GSM Touch Pro 2 (the silver cover)? or did you buy one of the housing sets from the vendors in Hong Kong -- if so, which vendor did you buy from?
Click to expand...
Click to collapse
Just the battery cover. I got it from MSG Digital, but it looks like they took down their listing for the product.
Is it me or is everything for the tilt 2 expensive and HARD TO FIND or un available. I love silicon cases right, so I wanted to buy one for my new tilt 2, CANNOT FIND ONE ANYWHERE! I found one for a T-Mobile touch pro 2 but it was black, not fitted for my device, ugly and EXPENSIVE! I tried to look for a spare stylus just in case, on Ebay I found ONE for $15!!!!!!! Tried to get a spare battery cover just in case something happened to mine, CANNOT FIND ONE ANYWHERE! Not on ebay, amazon or anywhere. I ended up ordering the european touch pro's battery cover for $20!! Batteries for the tilt 2 are hard to come across and are as much as $50 for one. I have never had so much trouble finding accessories for a phone as popular as this that is used on 4 MAJOR carriers. The pure, which is only supported on At&t has silicon cases in any color for maximum $5. Battery backs for $5-7 and the other accessories are even cheaper. Does anyone have an explanation for this, sorry for my rage I just need to express my anger towards this predicament.
froggylover1345 said:
Is it me or is everything for the tilt 2 expensive and HARD TO FIND or un available. I love silicon cases right, so I wanted to buy one for my new tilt 2, CANNOT FIND ONE ANYWHERE! I found one for a T-Mobile touch pro 2 but it was black, not fitted for my device, ugly and EXPENSIVE! I tried to look for a spare stylus just in case, on Ebay I found ONE for $15!!!!!!! Tried to get a spare battery cover just in case something happened to mine, CANNOT FIND ONE ANYWHERE! Not on ebay, amazon or anywhere. I ended up ordering the european touch pro's battery cover for $20!! Batteries for the tilt 2 are hard to come across and are as much as $50 for one. I have never had so much trouble finding accessories for a phone as popular as this that is used on 4 MAJOR carriers. The pure, which is only supported on At&t has silicon cases in any color for maximum $5. Battery backs for $5-7 and the other accessories are even cheaper. Does anyone have an explanation for this, sorry for my rage I just need to express my anger towards this predicament.
Click to expand...
Click to collapse
The issue stems from the fact that each carrier's version of the TP2 is just slightly different enough that many accessories will only work on one or two of them...so that presents the obvious challenge to manufacturers of trying to guess which models it's worth producing compatible accessories (like cases) for.
Boxwave does carry a line of silicone-like cases for the Tilt2, but I don't know if the styling will suit you.
I feel your pain. I want a rubber case for mine and I had thought I found one on ebay (it was the only one listed). I decided to send the seller a message just to make sure that it would fit a Tilt2. He said no, it was just for the TP2, EVEN THOUGH TILT2 WAS IN THE TITLE!!!!!!!!!!!!!!!
It does seem like everything is for the TP2 and not the Tilt2. But that's okay, I still love the phone.
Do you think the european touch pro 2 battery back will look okay on the tilt 2? I ordered it but haven't gotten it yet, but on the plus side the annoying PTT button wont be their (YAY FOR ME!). I hope it works..... I also hope my dream of silicon cases will come true
Eh, the PTT button is decidedly ungay. use Rhodium Keyboard Config to map it to do awesome **** like rotate screen on single click, disconnect data on double click, toggle wifi on triple, and bluetooth toggle on hold...
Really? Well, if I could find a Tilt 2 battery cover i'd use it. Otherwise not an option for me....
I'm quite sick of the whole situation myself
I totally feel your pain... and Hell, I live in L.A. where you'd think you should be able to find damn near anything on a shelf somewhere, but not a chance. Not even the AT&T stores here carry anything. If you have a Blackberry or an iPhone, then you have more choices than brains, but for anything HTC, good luck. And sorry, I'm not keen on shopping for some things online and accessories for this phone with so many variables is one of them. Someone is missing out on $$$
Okay, I have succeded a huge feat that only people's wild imaginations could think up. I have completed a challange so difficult, gorrillas and llamas will be terrified to death to think of the trouble and harshness I went through to complete this amazing acomplishment. This is no longer a figment of your imagination but a reality! I have found..... A SILICONE CASE FOR THE TOUCH PRO 2! I was searching in the Amazon for the mysterious silicone case when suddenly it popped out of no where! I found green, black, purple, pink, red, blue, and any other color of the rainbow. I was tempted to attack the deal and was just about to finish and proudly show my trophy when.... Amazon doesn't support paypal.... Oh well. Just a little over exaggeration. I did find them on amazon.com but no paypal support so ima have to wait
This site has silicone and rubberized for the tilt 2. http://www.talkietech.com/athtcti2ac.html
Where? The one I found was made for the t-mobile version and is $6.
If you're willing to do a little trimming (PTT button), then most of the Touch Pro 2 plastic, rubberized and silicone cases can be used.
TP2 Silicone case from a hong kong vendor on e-bay:
sorry I can't post link because I'm a new user.
OOh, put it as the title, put a space between every 3 letters or so. I dont have a ppt button anymore, gave it up for a new battery cover.