Hi everyone,
I've been running a WM6.5 ROM lately, and the stability was great - less crashes, hardly any problems with the device just turning off... but it was extremely slow because most of the RAM was used just for running the system.
So I went back to a WM6.1 ROM, and I noticed that the device was freezing in standby mode when left alone for a while - the screen won't turn on any more... apparently the CPU locks to 100% when the freezes happen, because after a restart the battery is drained to 50% (from 100%!) and the device is very hot. This used to happen on other WM6.1 ROMs as well...
Any idea why this is happening? Why only on WM6.1 ROMs? Is my device just ****ed up? Or am I doing something wrong?
same with me.. ..but i think that my device haw this freezing on sms receiving, sometimes it vibrate without stop. ..
Do you use BatteryStatus by any chance? I've just uninstalled it on a whim and so far no crashes. Won't be able to tell for sure until in a few days though...
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2 where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.
Prophet doesn't have 3G.
bemymonkey said:
Prophet doesn't have 3G.
Click to expand...
Click to collapse
read the post fully he is saying select what your phone supports
Did you try suggestion in post #4 ?
Just might be the answer your looking for
So how would I have gone about selecting something that my phone doesn't support in the first place?
As far as I can tell, there is no possible way I could have set my Prophet to use 3G
Oh and by the way, your ROMs are great and all, but using the comma, period and Shift key every now and then will make what you're trying to say a lot more easy to understand...
As for the problem itself - I've just reinstalled a completely blank ROM (one of dioxda's) and only sync'd my contacts and appointments - NO third-party software whatsoever. And looky here, no crashes. Now I can install one app per day and see which one causes the SODs...
bemymonkey said:
As for the problem itself - I've just reinstalled a completely blank ROM (one of dioxda's) and only sync'd my contacts and appointments - NO third-party software whatsoever. And looky here, no crashes. Now I can install one app per day and see which one causes the SODs...
Click to expand...
Click to collapse
I understand what you are saying on the HTC Tytn II and HTC Touch Diamond 2 the phones I had the Standby of Death with it was due to the phones network/band type being set to AUTO 3G/2G, changing this setting to either 3G only (WCDMA + UMTS 2100) or 2G only (GSM + AUTO) solved the problem completely.
In your case its most probably due to something you've installed which is a lot easier to solve, I suppose when you look in your phones network type setting GSM is the only option and the band is probably already set to AUTO.
I didn't know the Prophet did not support 3G before I posted this, on all phones that support 3G with this problem my solution often solves the problem but it can happen because of certain software installed also.
Related
I know this is not supposed to be able to happen, but on two occasions today and since upgrading to new radio and DCD 3.0 my wifi has turned on and detected networks with the wifi switch set to off, not sure why this is happening and I can not duplicate it on demand, trying to turn on wifi with the switch of via comm manager still does not work. Trying to find some kind of pattern but it has only happened twice.
Perhaps with the new radio there is a way to turn it on and off via software, or perhaps my switch is malfuntioning.
I had a similar experience as well.
I noticed it when I soft reset (not all the time, but 1/10 maybe?) and when trying to activesync, it would sometimes turn on.
I wish there was a way to figure it out, this means that it should be possible turn on wifi via software doesn't it?
Now that you mention it one of the times it came on was right after a soft reset.
Yep, this is becoming a well known problem.....well, for me not a big problem, just a slight annoyance....in the new ROM/Radio. It must have something to do with the radio, because I never experienced this in any other ROM. I'm wondering if WLAN may be turning on when there are short lapses in carrier coverage, and when an app (like activesync....I sync my e-mail using outlook)is trying to be connected to data (the internet). I just turn it back off when it turns on by itself. It doesn't ever seem to turn OFF by itself when I'm actually using WLAN.
EDIT:
one thing that may support my theory is that when you do a soft reset, it takes a bit to connect to the carrier network, and this just happens to be one of the times that WLAN turns itself back on..
And yeah, the battery usage definately sucks....plus when WLAN is turned on, and you're not connected to an access point, you could have data throughput issues as it keeps trying to see if it can connect through WLAN and/or radio......
I need it fixed , I didn't catch it earlier and my battery lost 85% today wihtout me even using my phone. Normally I get 2 full days I haven't really used my phone today and was fully charged this morning now I am at 15%, very poor performance for my typical use.
I am running dcd's 3.0.1 on my XV6800 and noticed that the wifi will turn on with the switch in the off position. It has happened to me a half dozen times or so. It only does it while I am on a call. Any suggestions? Has a solution been found yet? Any help is appreciated!
Same here, but has only happened a of of times.
louderjw said:
I am running dcd's 3.0.1 on my XV6800 and noticed that the wifi will turn on with the switch in the off position. It has happened to me a half dozen times or so. It only does it while I am on a call. Any suggestions? Has a solution been found yet? Any help is appreciated!
Click to expand...
Click to collapse
It only appears to happen while in a call for me as well...it happened with no additional software installed at that point so I'm certain it has something to do with the rom itself...I'm guessing the new radio but who knows for sure...
shame here
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
llmo128 said:
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
Click to expand...
Click to collapse
Except that I've never installed WiFiRouter...
I don't have WifiRouter either.
cdoggwsu said:
Except that I've never installed WiFiRouter...
Click to expand...
Click to collapse
And I hvae never had the problem. (and I do run wmwifirouter)
i saw this when the kitchen first came out as well. i also saw that it wanted to connect to a roaming alot more than it should as well.
sprint will tell you to set you phone roaming settings to "sprint only" the phones and ROMs come with "automatic" enabled.
my sprint buddy told me long ago to change this from auto to sprint only. soft reset. let it conect to a good sprint connection. then switch back to "auto" and soft reset.
i haven't did this for a year or so, but when i started seeing the roaming icon after many of the soft resets i thought about it. since i did this i haven't seen the roaming nor the wifi bug.
i think it is the theory that when you softreset the phone set on auto looks for the first tower, which could be a roaming tower. this takes a little too long to conect. in this longer than normal connection time when something like activesync wants to connect and has no internet connection it will enable wifi to connect if it has to.
i have noticed in the past with other ROM's as well that if your phone is in flight mode and you soft reset. as soon as activesync tries to connect and cant it will turn on wifi.
try this. turn on flight mode. soft reset. open active sync and hit sync. you'll see.
so for the record... this is not a dcd bug, but rather a windows mobile bug. wm 5 and 6. the best fix is to set it to sprint only or do the trick i stated above.
Are any of you running the HTC Home Plugin with the weather patch?
Because I installed it on my XV6800 and on a soft reset the WiFi was acting wacky. As if it was looking for a signal.
All I did to correct this issue was to disable automatic roam / download of the weather.
Well what I noticed so far is this, mostly happens after a soft reset, but sometimes it does it at random. Only happens when I have DCD 3.0.1, I am not seeing it with any other custom rom and I think I have tried them all. I have not had any roaming icons or the like and with telus customizations on you have two options for network, there is standard and automatic.
The only reason I hold on to it being dcd 3.0.1 is that no other version 3.35rom I've installed has done it, the ones I have installed off the top of my head are the stock sprint rom, DCD 3.0, 3.0.1, no2chem 5053, and two others that I can't remember as well as my own stripped down version of the stock sprint rom.
jjlwork said:
Well what I noticed so far is this, mostly happens after a soft reset, but sometimes it does it at random. Only happens when I have DCD 3.0.1, I am not seeing it with any other custom rom and I think I have tried them all. I have not had any roaming icons or the like and with telus customizations on you have two options for network, there is standard and automatic.
The only reason I hold on to it being dcd 3.0.1 is that no other version 3.35rom I've installed has done it, the ones I have installed off the top of my head are the stock sprint rom, DCD 3.0, 3.0.1, no2chem 5053, and two others that I can't remember as well as my own stripped down version of the stock sprint rom.
Click to expand...
Click to collapse
Did you have this issue with your Stock ROM?
I only ran the stock 3.35 rom for about a day but I seem to recall it happened then as well. I didn't think it was necessarily DCD's rom but was an issue with the new radio. I'll try the steps cody recommended and see if that does the trick.
llmo128 said:
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
Click to expand...
Click to collapse
Nor have I.
I just switched to sprint only, and after a soft reset, the wifi did not turn on as usual.
[email protected]$ said:
Did you have this issue with your Stock ROM?
Click to expand...
Click to collapse
No I did not, however I also did not have it on there very long. I flash often, and I am constantly tweaking, "My name is jjlwork have a flashing problem" lo
Interestingly enough I am able to reproduce by following cody's instructions with the flight mode -> soft reset -> activesync
First of all i must apologize for not posting on development but im not allowed since this is a new account on xda...I live in London but im in mallorca spain for the summer looking for a job so having a phone is very important. As soon as i got my sgs2 i rooted it .. i was having some issues (random reboots) which led me to think it was either something wrong with the unstable kernel i was using or more likely a bye bye RAM. I decided to reset the phone and installed the LIGHTENING ROM... I Just love it!!! but... now im having trouble with it ... (BIG TIME) I had not realized something was wrong because everything seemed fine until i asked my gf to call me today... she couldnt... then i tried several times myself without success. I rebooted and to my surprise i started receiving a lot of work calls!!! (Which is great) but then i tried calling myself and it didnt work again. Im going back to stock firmware for now since the device is a phone after all. Dont know just yet if this will fix it but ill keep you guys posted... anyone having similar issues??
It might be a small bug in your firmware, try reflashing Stock and then see.. If still the same problem, try stock firmware from another source and reflash.. if still the same problem.. then its a issue.. Post your findings.. please
I have no issue like that.. just trying to help
yahmuffin said:
First of all i must apologize for not posting on development but im not allowed since this is a new account on xda...I live in London but im in mallorca spain for the summer looking for a job so having a phone is very important. As soon as i got my sgs2 i rooted it .. i was having some issues (random reboots) which led me to think it was either something wrong with the unstable kernel i was using or more likely a bye bye RAM. I decided to reset the phone and installed the LIGHTENING ROM... I Just love it!!! but... now im having trouble with it ... (BIG TIME) I had not realized something was wrong because everything seemed fine until i asked my gf to call me today... she couldnt... then i tried several times myself without success. I rebooted and to my surprise i started receiving a lot of work calls!!! (Which is great) but then i tried calling myself and it didnt work again. Im going back to stock firmware for now since the device is a phone after all. Dont know just yet if this will fix it but ill keep you guys posted... anyone having similar issues??
Click to expand...
Click to collapse
check if your internet connection is set to wcdma/gsm auto mode...i am having similar problem when it is set to wcdma/gsm auto..it keeps loosing connection and radio switches off...making my phone unreachable most of the time.setting it to gsm only is the only way to cure this at the moment for me.
iznee said:
check if your internet connection is set to wcdma/gsm auto mode...i am having similar problem when it is set to wcdma/gsm auto.
.it keeps loosing connection and radio switches off...making my phone unreachable most of the time.setting it to gsm only is the only way to cure this at the moment for me.
Click to expand...
Click to collapse
hi iznee;
I am from malaysia too.
currently I am using stock KE2 ROM. just rooted the phone for some xtra things that I want to do with it.
my phone is set to wcdma/gsm auto connection and never have outgoing/incoming call problem. Data also works as expected and by the way I am subcribed to Celcom unlimited Data plan.
by switching to GSM only, you are limiting the speed ability of the data to GPRS/EDGE only. please noted that you cannot have voice and data simultaneously while in GSM only mode. your Data session will be suspended if you make an outgoing call or if you receive an incoming call.
however, if you set it to WCDMA only, you can have both Data and voice simulataneously and that explain for 3G video call. but, not all areas are covered by 3G thus, if you entering an area without 3G, your phone is useless because there will be no signal.
if you set it to WCDMA/GSM auto, the phone will switch to GSM when there are no 3G signal available and that will ensure smooth phoneoperation in making/receiving call.
After a week of usage, I can confirm to you that I never have outgoing/incoMing call.problem and no data.problem.
regards,
morisa
mmorisa said:
hi iznee;
I am from malaysia too.
currently I am using stock KE2 ROM. just rooted the phone for some xtra things that I want to do with it.
my phone is set to wcdma/gsm auto connection and never have outgoing/incoming call problem. Data also works as expected and by the way I am subcribed to Celcom unlimited Data plan.
by switching to GSM only, you are limiting the speed ability of the data to GPRS/EDGE only. please noted that you cannot have voice and data simultaneously while in GSM only mode. your Data session will be suspended if you make an outgoing call or if you receive an incoming call.
however, if you set it to WCDMA only, you can have both Data and voice simulataneously and that explain for 3G video call. but, not all areas are covered by 3G thus, if you entering an area without 3G, your phone is useless because there will be no signal.
if you set it to WCDMA/GSM auto, the phone will switch to GSM when there are no 3G signal available and that will ensure smooth phoneoperation in making/receiving call.
After a week of usage, I can confirm to you that I never have outgoing/incoMing call.problem and no data.problem.
regards,
morisa
Click to expand...
Click to collapse
Hi morisa,
I have came to a conclusion that my device is faulty..it simply refuses to behave well in gsm/wcdma auto mode..just waiting to get it replaced...anyway i am really glad its working with no issue for you on celcom becoz currently i am in the middle east and when i get home next week i will be using celcom. Thanks for the info
Regard
Iznee
Sent from my GT-I9100 using Tapatalk
Well so far my findings are null. i flashed kd2 stock with odin with the re-partition parameter on. Nothing happened. Was thinking re-partition would actually get rid of all the apps in case something there was giving problems... the phone was working fine when i was in england with kd1 stock... (How do i get rid of everything and start from scratch?? and what does the efs option do?? im tempted to use it xD) ... One other thing is i read somewhere that kd2 was giving trouble on orange uk (im ukthree but have tried with vodafone spain simcard) any ideas???
Efs is your IMEI code etc.
Backup as per post dev section .
jje
Sent from my GT-I9100 using XDA Premium App
iznee,
I have done a test regarding call in/out and also data connection. below are the test;
I am driving from KL to JB and crossing 5 states (KL, Selangor, N.Sembilan, Melaka and Johor). Along the 400km routes, I have taken the NorthSouth Highway, federal trunk road and also state road. My phone will change from H/3G to E/G when the signal is not available and I've no call drop whatsoever. I made calls while 3G/H signal is strong and also received calls. I did use the google maps.so that the data connection will be.continuous. In 3G/H mode, I can make/receive calls while the maps constantly refreshing based on my driving location.
when I enter the are without 3G, the phone automatically switched to GSM mode. albeit a bit slow.in data.connection, the maps still refresh without fail. when I make an outgoing call, the maps will stop refreshing as this is the behavior of GSM that voice call will take.charge and data will be suspended until I hangup the call then the data automatically resume its connection and the map refresh automatically showing my driving location. Then I use my other phone and call my SGS2 and as expected, the voice call going in and data suspended temporarily.
after hangup, data resume again and the map refresh automatically.
and when 3G signal is available, the phone automatically switch to 3G/H mode again and vice versa along the route.
all in all, I can say that my SGS2 works wonderfully and meets my expectation that phone function is priority. sattelite locks will take no.more than 10s and sometimes just under 2s. Superb performance by the phone.
Camera wise, no complain as I am.not a proffesional photographer. and I am more than happy for the camera performance.
Battery wise, no complain as I have unlimited data so i have all.my Facebook, twitter, push mail, livescore, news, weather etc ON 24hours. anyway, I have vehicle charger with me so the phone will be charged as long as I am driving.
this is from the about of the phone;
Android version: 2.3.3
Baseband: I9100XXKDJ
Kernel: 2.6.35.7-I9100XXWKE2 - CL187606 [email protected] #2
Build number: GINGERBREAD.XWKE2
regards,
morisa
Sent from my GT-I9100
Sent from my GT-I9100
Sorted!! I made a hard reset... Which led to a bootloop. Fixed turning phone off volume up+home+power . Clear everything and reboot... Voila now works like a charm hope this helps otgers in my situation
Hello everyone, i'm asking this because it's the third time i had this issue. I often keep my Data Network Mode deactivated and turn it on only when i need because of my 3g plan (quota, taxes, and also because it's likely to find a WiFi network in the places i usually go).
The problem is, sometimes i turn on 3g (by Phone options menu) and... nothing happens... i need to reboot to make it work again.
The 3G network in my country is quite unstable, but i'm pretty sure that isn't a signal problem because one of the times i was turning on/off the 3G to make it work and i gave up and forgot to turn it off, the next day when i tried again i found it was On but not connected. After a reboot, working again.
Anyone having this issue who found a fix? Could be a problem with the kernel or app?
Edit: I Forgot: CF-ROOT Kernel, KF3
Omega Frost said:
Hello everyone, i'm asking this because it's the third time i had this issue. I often keep my Data Network Mode deactivated and turn it on only when i need because of my 3g plan (quota, taxes, and also because it's likely to find a WiFi network in the places i usually go).
The problem is, sometimes i turn on 3g (by Phone options menu) and... nothing happens... i need to reboot to make it work again.
The 3G network in my country is quite unstable, but i'm pretty sure that isn't a signal problem because one of the times i was turning on/off the 3G to make it work and i gave up and forgot to turn it off, the next day when i tried again i found it was On but not connected. After a reboot, working again.
Anyone having this issue who found a fix? Could be a problem with the kernel or app?
Edit: I Forgot: CF-ROOT Kernel, KF3
Click to expand...
Click to collapse
mate i am afraid you have answer already - "The 3G network in my country is quite unstable"
that can clearly produce the bug. Just in the case check your APN settings if they are correct. Settings- wireless and network-mobile networks- access Poin Names - compare the stats there with your network provider and make deep research.
just example i am on vodafone - i found that i was running vodafone live profile in APN and i was loosing conexion and i had troubles loading some pages - after research i found that there is another setup for vodafone as well - different then the live but for vodafone as well. i am using it since then and i am experiencing now the lighting speed of 3g. Just give it a try.
Searching on the internet i found that the configuration of my APN is equal to the recommended.
Backup data and factory reset phone should clear any software problems .
You could try flashing KH3 modem .
jje
Same issue here for both rooted and un-rooted GS2
Retracted - will have to do more testing
Hey everybody
I hope I can get some help from you guys.. I got this issue that I started to get into the running and started to need more of my gps to track my training and Ive noticed this weird behaviour of my gps.. It just wont even search for satellites whenever the 3g is on (you know the alert that says searching for gps).. installed the GPS checker to see if there was no satellites or something but it wont even search for them whenever I have the 3g on.. I found that the GPS works only if I disable the Mobile Data and restart my phone.. So I cant have both at the same time.. the minute I enable the 3g data it stops working and I have all the GPS options checked at the configuration and the wifi 3g assist.. What could be causing this?
Please let me know if some of you guys have some issue like this.. I have JellyBam 9.0.0 cyanogen mod based 10.1 and baseband XXXKI4
lealxh said:
Hey everybody
I hope I can get some help from you guys.. I got this issue that I started to get into the running and started to need more of my gps to track my training and Ive noticed this weird behaviour of my gps.. It just wont even search for satellites whenever the 3g is on (you know the alert that says searching for gps).. installed the GPS checker to see if there was no satellites or something but it wont even search for them whenever I have the 3g on.. I found that the GPS works only if I disable the Mobile Data and restart my phone.. So I cant have both at the same time.. the minute I enable the 3g data it stops working and I have all the GPS options checked at the configuration and the wifi 3g assist.. What could be causing this?
Please let me know if some of you guys have some issue like this.. I have JellyBam 9.0.0 cyanogen mod based 10.1 and baseband XXXKI4
Click to expand...
Click to collapse
If you don't have this issue with a stock ROM, its probably a bug in the Jellybam ROM. Have you done a clean install? Since Jellybam has been banned from XDA, you probably won't get support for that ROM here. Maybe you should try contacting the dev of the ROM on their forum.
immortalneo said:
If you don't have this issue with a stock ROM, its probably a bug in the Jellybam ROM. Have you done a clean install? Since Jellybam has been banned from XDA, you probably won't get support for that ROM here. Maybe you should try contacting the dev of the ROM on their forum.
Click to expand...
Click to collapse
I tried the Omega stock V24 and had the exact same issue..
There's a number of GPS 'fixes' on here, I suggest you search for the threads containing those fixes & try some of them.
Hi!
I just want to share my workaround having same problem as this. After configuring my gps.conf as i've posted here: http://forum.xda-developers.com/showthread.php?t=1239713&page=77, all went smoothly and fast GPS lock for just about 5 - 15 sec, even on a cloudy or rainy day. Then last Tuesday morning, as soon as the mobile data got connected it cuts the GPS. In short, GPS & mobile data won't run simultaneously. I ran a series of reboot, shutdown, clean up... then as much as i don't want to, i ended up reflashing/reinstalling everything but to no avail! Now, since everything is fresh w/ my S2, but still had same problem. I now zeroed in the problem to how my mobile data connects. I didn't think of this before because everything works perfectly fine. Anyway, this time i changed the Network mode from "WCDMA only" to "GSM only". Finally! it works! problem solved.
So far as of this writing, both the GPS & mobile data connection are working simulteously. Only drawback are: (1) I can't browse the net using the "GSM only" mode because of the bandwidth limitation, but works ok w/ Waze app. (2) If i switched & connected to mobile data using "WCDMA only" mode, i need to switch again to "GSM only" mode & restart the phone in order for the GPS to works again.
I don't know, but i'm thinking if our telco here has something to do why I had this problem. Maybe they change some configuration... I dunno.
My phone:
SGS2
Android 4.1.2
3.12.0-rc1 Siyah-Dorimanx-V8.41
XWMS3 NeatROM v6.3
Hi,
I have exactly the same problem. Searching forum and the internet without results.
Last week I spent a lot of time with my SGS2. The problem occurs when gps and mobile internet data are used at the same time, but only when the phone use 3G or H+ standard.
When mobile data are transmitted on E/2G there is no problem at all. The issue with gps is that when I drive car and I'm in one location at the city (every day at the same place) the gps icon disappeared and no navigation at all. This is quite big square around 2x2 km. After I leave the area I have to turn off and on the phone and everything works ok, even when mobile data 3G/H+ are transmitted.
So described problem occurs only at the specific area. I don't know what cause the issue. After next researching I discovered, that gps disapeared ONLY WHEN THE PHONE USES UMTS 2100 MHz. In the service menu I mark only UMTS 900 MHz and the gps works very good. This time mobile data 3G/H+ are used simultaneusly with gps and everything is ok.
So the problem is olny when we are connected to BTS at 2100 MHz and only at the specific area. It seems that some kind of 2100 MHz signal intereferences wiht gps circuit maybe. I'm not a proffesionalist, I only suppose that.
Maybe somebody will find the complete solution with that.
My problem is at the cetral of Poland. I tried a lot of firmwares, modem drivers, gps.conf modifications. Nothing. Zero results.
My phone
SGS2
Android 4.1.2
Modem I9100XXKH3
T-mobile brand (but tested unbranded)
JZ054K.I9100XWLSS
Regards
Hmmm... it seems our telco here has something to do w/ my concern. Today, simultaneously my S2's GPS & 3G/H+ are working perfectly fine. I didn't do any reconfiguration w/ my S2, i just tried to switch how my mobile data connects, from "GSM only" to "WCDMA only".
screenshot:
h~~p://s3*postimg*org/yac4t20ib/Screenshot_2014_10_15_07_17_10_1.png
I've purchased Redmi Note 3 Pro a few days ago. I'm satisfied with overall of the phone but there is one problem I'm facing.
After I quit airplane mode(every night I turns on airplane mode before sleep then turns it off in the morning), my phone won't detect the network most of the time, sometimes it detects the network but it took way too long to happen but still, it acts like there's no network. I couldn't call, sms, receive call, receive sms and use mobile data. Everytime I have to restart my phone to detect the network.
Is there any ways to fix this problem ? It irritates me a lot as I have to restart my phone everyday.
update your phone, this issue has been solved about a month ago
Yeah the new builds are much beter
Hi guys,
I also have network problems on my Note 3 Pro - but without airplane mode. My phone just randomly looses internet connectivity, sometimes completely, sometimes it drops to Edge, most of the times with a warning about roaming and data connectivity. And yet sometimes I completely loose mobile signal but a on/off airplane mode fixes it.
It's pretty irritating, I didn't have these sort of problems with my prev. phone, and I haven't visited any new places or with bad reception.
I'm running the 7.1.8.0 global stable rom.
PS: My locale is missing, and I chose Argentina on random, then disabled auto-time. Could this mess things up ?
Any input would be appreciated.
klincharov said:
Hi guys,
I also have network problems on my Note 3 Pro - but without airplane mode. My phone just randomly looses internet connectivity, sometimes completely, sometimes it drops to Edge, most of the times with a warning about roaming and data connectivity. And yet sometimes I completely loose mobile signal but a on/off airplane mode fixes it.
It's pretty irritating, I didn't have these sort of problems with my prev. phone, and I haven't visited any new places or with bad reception.
I'm running the 7.1.8.0 global stable rom.
PS: My locale is missing, and I chose Argentina on random, then disabled auto-time. Could this mess things up ?
Any input would be appreciated.
Click to expand...
Click to collapse
I am facing a terrible network problem with my phone too. I have used China and Global ROMs and I cannot fix the problem. I am currently using Global 7.1.8.0
My phone does not respond to incoming calls when in sleep mode. Incoming calls go directly to voicemail. It seems that it is connected to the network while in sleep mode. However, it does not respond to the incoming call.
If the phone is awake with the screen on, it shows an incoming call.
I have tested other SIM cards, switching from 3G to 2G, reseting the phone, clearing cache, disabling "do not disturb".... The problem just does not go away. It's a shame that a phone with this much potential has a basic problem like this.
mura20 said:
I am facing a terrible network problem with my phone too. I have used China and Global ROMs and I cannot fix the problem. I am currently using Global 7.1.8.0
My phone does not respond to incoming calls when in sleep mode. Incoming calls go directly to voicemail. It seems that it is connected to the network while in sleep mode. However, it does not respond to the incoming call.
If the phone is awake with the screen on, it shows an incoming call.
I have tested other SIM cards, switching from 3G to 2G, reseting the phone, clearing cache, disabling "do not disturb".... The problem just does not go away. It's a shame that a phone with this much potential has a basic problem like this.
Click to expand...
Click to collapse
Just tested, mine rings when sleeping. But define sleeping... ? When display is off for a some time ?
I am also suspecting something with the sleep mode, it usually 'switches' to Edge or no connection while in my pocket. I am also suspecting problems with the sim card, have you tried with a new one, or card in another phone ?
Otherwise I really like the phone It brought my trust back in Android.
edit: Update > Download Update and it started downloading, then restarted, installed something, but I'm still on 7.1.8.0 ...
Auto download is ON.
klincharov said:
Just tested, mine rings when sleeping. But define sleeping... ? When display is off for a some time ?
I am also suspecting something with the sleep mode, it usually 'switches' to Edge or no connection while in my pocket. I am also suspecting problems with the sim card, have you tried with a new one, or card in another phone ?
Otherwise I really like the phone It brought my trust back in Android.
edit: Update > Download Update and it started downloading, then restarted, installed something, but I'm still on 7.1.8.0 ...
Auto download is ON.
Click to expand...
Click to collapse
I define the "sleeping mode' as phone with screen off for some time. I tried different SIM cards and from different network companies (3 and Vodafone). Same problem. My network signal is extremely unstable. I like the phone a lot too. However, network signal is something so basic on a phone that it is a shame it does not work properly.
I am also facing similar issues but xiaomi people are not recognizing the issue. They are telling that it's an isolated issue. Please post here, so that they fix this problem.
http://en.miui.com/thread-255747-1-1.html
I got a new sim card, and upgraded my plan, now I have good reception, almost always LTE, sometimes drops to H+. How I miss calls when my phone's display is turned off/sleeping. I'm getting pretty pissed of with Xiaomi about this ****
So annoying
Hope we get the 7.2.2 update soon and it fixes this problem
What good is a phone if it has network issues
chraston98 said:
I've purchased Redmi Note 3 Pro a few days ago. I'm satisfied with overall of the phone but there is one problem I'm facing.
After I quit airplane mode(every night I turns on airplane mode before sleep then turns it off in the morning), my phone won't detect the network most of the time, sometimes it detects the network but it took way too long to happen but still, it acts like there's no network. I couldn't call, sms, receive call, receive sms and use mobile data. Everytime I have to restart my phone to detect the network.
Is there any ways to fix this problem ? It irritates me a lot as I have to restart my phone everyday.
Click to expand...
Click to collapse
Got my phone yesterday and had the same problem this morning. Solved by signing out of my MI account, switching off VoLTE and rebooting. Everything works properly now. Hope this helps.
Twotems said:
Got my phone yesterday and had the same problem this morning. Solved by signing out of my MI account, switching off VoLTE and rebooting. Everything works properly now. Hope this helps.
Click to expand...
Click to collapse
Forget my previous posts on this issue. Follow these steps as they worked perfectly for me and I had to repeat them this evening since I did a reboot.
1. Keep sim registration on automatic on both sims.
2. Power off phone.
3. Remove sim 1 and keep sim 2 (my sim 2 is 3 Mobile UK roaming. That may make a difference).
4. Power on phone. My roaming sim 2 registers immediately.
5. Power off phone.
6. Insert sim 1 (primary or local sim).
7. Power on and you should have both sims working perfectly.
8. Go to sim settings and change your preferred calls and data back to sim 1 if you need to.
These steps have worked for me twice so far. Hope it helps.
P. S. I must add that I have zero, zilch, nada issues with my Zenfone 2 running the same setup (local sim and uk T-Mobile). Love the Xiaomi so far but detest the lack of native alphabetical for the apps. Considered Nova but the free version doesn't give message counters. Any suggestions?
There is a temporary trick posted at http://en.miui.com/forum.php?mod=viewthread&tid=251620&page=1#pid4736228
I was having network problems and it seems to be much better (perhaps solved) with this trick.
I wish to know what this com.qualcomm.qti.supersaver does!
mura20 said:
There is a temporary trick posted at http://en.miui.com/forum.php?mod=viewthread&tid=251620&page=1#pid4736228
I was having network problems and it seems to be much better (perhaps solved) with this trick.
I wish to know what this com.qualcomm.qti.supersaver does!
Click to expand...
Click to collapse
Thank you brovsky for sharing it really helped hope the new update fixes the problem completely btw have you gotten the new update? (Global 7.2.2)
filthyrich77 said:
Thank you brovsky for sharing it really helped hope the new update fixes the problem completely btw have you gotten the new update? (Global 7.2.2)
Click to expand...
Click to collapse
I am glad it helped you. Make sure you type the code *#*#995995#*#* twice after stopping the apk. I actually disabled this apk without any secondary problem.
I am running Global ROM 7.1.8.0. Still waiting for 7.2.2. Let's hope this problem will be fixed in the next update.
Hi,
I'm also facing network issues with 7.1.8.0 : when exiting airplane mode or switching from Wi-Fi to gsm network, I lose data connection. The only way to get data back is to reboot the phone.
Sadly, the trick from miui forum didn't work for me for this particular problem.
Il hope this problem will be fixed in 7.2.2.0 update.
@ mura20 : thanks for the trick nevertheless...
OTA 7.2.3.0 is here!
OTA 7.2.3.0 solved my problem !
Great
I also got the new ota. But how to flash? Twrp returns error 7 when I try to flash
wont u brick your fone if u flash ofw from recovery?
try this in TWRP go to MOUNT there you'll see a option "mount system as read-only" un-check that box and try flashing the rom..
i also have unclocked bootlader will it get bricked if i install it using the update app