Does RAPHIMG.NBH (microSD flash) method work for SPL? - Touch Pro CDMA

Before I try something stupid, I am wondering if someone here might know if I can flash SPL using the SD card the same way I flash roms??
My activesync doesnt connect at all and I want to reflash stock spl but RUU just isnt working because it doesnt see my phone via USB/activesync...
thats when i got the idea to try this.. could find anythign in search, so here I am...
thanks for your attention

In case anyone else needs this info:
I just found this on PPCGeeks: Link
Does the RUU program give you the error?? If so that was what happened with me when trying to run the manual HardSPL off the SD card. If it's stuck in the Tri-Colored screen try resetting the phone with your stylus. Try hard resetting your phone (for some reason the manual method worked for me after that) (Hold power, volume down, center d-pad button, and reset)
Here's what I did:
* Hard Reset Phone
* Download Raphael_CDMA_HSPL_037.exe and SSPLManual_Raphael.zip
* Transfer Raphael_CDMA... to an empty folder on the desktop of your VM
* Run Raphael_CDMA (but don't use it)
* Now look in the above folder and find RUU_Signed.nbh and move to the root of your SD card
* Use a file utility on your phone to rename RUU_Signed.nbh to RAPHIMG.nbh
* Put SSPLManual on your SD card and run the program
* It should now flash your SPL
* To test boot into bootloader and it should say 0.37.CMONEX
* Delete RAPHIMG.nbh
* Now to flash a custom ROM download one and find the file RUU_Signed.nbh... move it to the root of the SD card... rename it to RAPHIMG.nbh (using the phone) and enter the bootloader (hold power, volume down, and push the reset button)... it should now flash the ROM
Hope this helps... I know it can be frustrating when you don't want to screw anything up!
Click to expand...
Click to collapse
So I did it in reverse, got the Stock locked SPL and copied it to the flash, renamed it and ran SSPLManual. then it updated fine.
Note: it didnt work with the Power+Volume Down updater, i had to actually use the exe to launch the updater
see you at the repair center, time for my 5th TP keyboard

Related

Big storage on Gene

Small soft-pack for removing free space from Gene ROM, make lzx compressing ROM and set Extrom size to 2MB (extrom will be cleared).
After use it and flashing new ROM, you will have 65-70 MB of user storage.
Use it on own risk.
Usage:
1. Unzip this archive to one folder (for example c:\lzx).
2. Put file ruu_signed.nbh from your ROM in this folder too.
3. Run make_lzx.cmd
After it work about 5 min, and you will have new ROM as file GENEIMG.nbh in this folder.
Flashing:
This ROM cant be flashing throught RUU.
You must flash it from SD-Card.
On your device must be HARD-SPL installed !!!
Format SD-Card as FAT32.
Put GENEIMG.nbh on SD-CARD.
Charge your device at 100%!
Insert SD-Card in Gene, press AND HOLD "Camera" button, and do soft-reset.
If you see white screen with "Reading SD content":
Release "Camera" button, wait, and when countdown in left-bottom corner of screen is appear, press "Power" button. Flashing is begin, and approx. 5 min long. After you will see "Success. Press any key". Do soft-reset. Congratulation.
But if you see 3-color screen, then you mast do magic with your SD-Card.
See http://forum.xda-developers.com/showthread.php?t=371147
Good luck!
Cant upload file to this forum.
Download from http://www.filefactory.com/file/8f6656/
thanks orefkov .. will give it a shot tonite.
hmmmm will try it tonight
orefkov i am getting this error bro .........
NJackal said:
orefkov i am getting this error bro .........
Click to expand...
Click to collapse
try unpack archive closer to root folder, ie c:\lzx
Or try it on WinXP.
need help
i have successfully flash the rom with this tool, after that i soft reset, device automatically boot into windows mobile 6.1, runs all the basic setup (screen align, date setup), then it automatically load some setup, after setup, device automatically reset..... PROBLEM start here, it stop at the first screen, refuse to boot into windows... i hard reset, soft reset, still the same, anything wrong?
try press power button some times, or reinsert the battery.
NJackal said:
orefkov i am getting this error bro .........
Click to expand...
Click to collapse
hmmmm no change getting the same error again ............. and i am using xp only bro it is a vista theme only ..........
NJackal said:
orefkov i am getting this error bro .........
Click to expand...
Click to collapse
Have you tried appending the temp folder's path in CMD? The process cannot find the file - so appending the path might help. Also, the batch file doesn't seem to recognise long filenames. That could be the reason the files inside your desktop can't be found.
I create GENEIMG.nbh from a wm6.1's nbh file by your tool and flash it successfully. But it stop at the first screen, refuse to boot into windows... i hard reset, soft reset, still the same, anything wrong? Thanks a lot!
That work unstable on 6.1
Try on 6.0
Or try with that xip.
orefkov said:
That work unstable on 6.1
Try on 6.0
Or try with that xip.
Click to expand...
Click to collapse
Thanks a lot! I'll try that again by your new Xip and report the result.
Hello, orefkov:
I try your new xip, but it has the same problem.
I'm using is not a official rom but a chinese version with core 19199. What I can do? Thanks!
then you mast do magic with your SD-Card.
what is the magic??
I dint get u..
Every ROM cant be flashed from SD card.You must make it to boot from SD card.Also make sure that you have formatted SD card in FAT32 and proper chunk size.

Help flashing OEM Rom(no USB connection)

I need help with installing an OEM AT&T rom to my phone. My usb gave out on it and I need to return it to the store. The only thing is that the file that I have is an EXE file. can I put that on my memory card and run it just like that or do I need to do it another way?
and yes I did search but nothing came up. Only stuff on how to flash it in non .exe file
Open the .exe with winrar, extract the .nbh file inside, rename it to RAPHIMG.NBH and place it on the root directory of a microsd card (which must be formatted as FAT32)
hold volume down, press the soft reset button w/stylus
should bring up 3 color screen and prompt you to flash
Thank you very much Da_G. Worked perfect and am now the proud owner of a new HTC Fuze.
Da_G said:
Open the .exe with winrar, extract the .nbh file inside, rename it to RAPHIMG.NBH and place it on the root directory of a microsd card (which must be formatted as FAT32)
hold volume down, press the soft reset button w/stylus
should bring up 3 color screen and prompt you to flash
Click to expand...
Click to collapse
I did the same thing another way I guess I should share it with you as well. I put the phone into bootloader mode by holding the power button and volume down as I turned the Fuze on. Then I connected my phone to the computer via usb and ran the exe... It worked like a charm!

help

Hi apologies for the question in advance!!!
Im trying to flash a radio onto my O2 stock rom .. i ave successfully put hspl on device but when i try to flash the radio nothig happens????
I have renamed radio RUU_Signed.nbh and when i run custom ruu i get a prompt from computer to allow programme which i do and then nothing happens
THIS IS DRIVING ME MAD I HAVE SEARCHED THE FORUMS WATCHED THE YOU TUBE DEMO AND CANT THINK OF ANYTHING IM DOING THAT IS WRONG ????????????????????????????????????????????
Have you tried to copy the radio file (rename it to LEOIMG) to your SD card, reboot while holding volume down, and flash from there?
Will give it a go now thanks for the help much appreciated
NO LUCK STILL WONT WORK IM SURE IM JUST DOING SOMETHING WRONG BUT I DONT KNOW WHAT...
ABOUT TO THROW PHONE
you did unzip teh radio file and extract the .nbh, right? you didnt just rename the zip(or rar, or 7z, whatever) to .nbh did you?
(by teh way, for usb flashing, no need to change teh filenmame at all, just extract the .nbh, put in folder with customruu.exe, and run customruu. And of course this wont work if your spl ends .0000)
So you copied the radio file (named LEOIMG) to the root of your SD card?
You get past the 3 colored bootloader?
What msg do you get, whats happening?
Edit: What samsamuel said, you have to unzip the file first ofc
Hi yes to above i did extract, tried custumruu no joy, tried renaming LEOIMG AND SAVING TO SD CARD ROOT hold power and down volume , it goes into bootloader and just sits there doing nothing in the red band it says SPL-2.08 HSPL, and in the white band it says SERIAL?????????????????
does your pc run avast or mcafee? they can disable customruu. you can tell because when you run it nothing at all happens.
as for sd card failing, have you formatted it since you got it? cos the o2 stock one comes formatted to FAT but need to be FAT32 for flashing.
also, many 16gb and some 8gb cards can be temperemental
Thank you everyone
problem was with the computer not the process tried it on the desktop instead of lap top and it worked first time

HELP Please SPL problem

I have hd2 stuck on spl with unknown symbols on model field
Can not install any thing
I tried to install the official rom & custom rom (NO luck)
please help me
look at the pics attached
bluerahaf said:
I have hd2 stuck on spl with unknown symbols on model field
Can not install any thing
I tried to install the official rom & custom rom (NO luck)
please help me
look at the pics attached
Click to expand...
Click to collapse
If I was you I would be install (the risk aria/branded) stock ROM over SD-card.
kurt-willems said:
If I was you I would be install (the risk aria/branded) stock ROM over SD-card.
Click to expand...
Click to collapse
Thanks but please be more specific
And by the way my official rom is
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Take that rom and upack it with wrar and the name the .nbh file into leoimg.nbh and the copy it to yout sd card. You sd card must be formatted into fat32. Put your sd card in the phone and go into the bootscreen (hold down the volume button and press the power button to do that). Then follow the instructions on the screen.
bluerahaf said:
Thanks but please be more specific
And by the way my official rom is
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Click to expand...
Click to collapse
Like Abdul9. mentioned:
1. Download from HTC's website the official ROM with your S/N and extract the RUU file with 7-zip or power archiver to desktop.
2. There wil be a file named ruu_signed.nbh on your desktop. Rename that to leoimg.nbh.
3. Copy this file to the root of the SD card, preferably not larger than 2Gb.
4. Power off device and reinsert SD card.
5. Enter bootloader mode (press and hold vol down key and then shortly on/off button).
6. Follow the instructions.
Abdul9. said:
Take that rom and upack it with wrar and the name the .nbh file into leoimg.nbh and the copy it to yout sd card. You sd card must be formatted into fat32. Put your sd card in the phone and go into the bootscreen (hold down the volume button and press the power button to do that). Then follow the instructions on the screen.
Click to expand...
Click to collapse
kurt-willems said:
Like Abdul9. mentioned:
1. Download from HTC's website the official ROM with your S/N and extract the RUU file with 7-zip or power archiver to desktop.
2. There wil be a file named ruu_signed.nbh on your desktop. Rename that to leoimg.nbh.
3. Copy this file to the root of the SD card, preferably not larger than 2Gb.
4. Power off device and reinsert SD card.
5. Enter bootloader mode (press and hold vol down key and then shortly on/off button).
6. Follow the instructions.
Click to expand...
Click to collapse
Did that many times with many roms >>> did not work
bluerahaf said:
Did that many times with many roms >>> did not work
Click to expand...
Click to collapse
Many Rom's????
You just need it to do with the right stock Rom.
kurt-willems said:
Many Rom's????
You just need it to do with the right stock Rom.
Click to expand...
Click to collapse
I did try the right stock Rom.
But no lock.
bluerahaf said:
I did try the right stock Rom.
But no lock.
Click to expand...
Click to collapse
I m sorry to say but I think it is either hardware related or SPL related problems. Maybe it is now the time for you to bring it to HTC repair center.
Good luck

Instructions reviving ME170C/ME170CX from bricked

After 3 days tried to find out how to recovered or fix bootloop/brick ME170C, here is the way which was succeed for me.
1. Download latest firmware from ASUS website
the best way using complete firmware (containing stock rom) like this version UL-K017-WW-11.2.3.18.2-user, if succeed then later on you can continue with OTA system update
2. Rename the firmware file to K017_sdupdate.zip and put on SD card then Insert the SD card into a tablet. (Use good one SD card, Sandisk perfect I don't know others)
3. Download flashtools and USB driver at the bottom of this thread
4. Enter the DROIDBOOT, for this purpose on the tablet off push and hold button volume + and power then connect USB cable to tablet and PC.
5. Open your firmware archive and copy or drag & drop the boot.img, fastboot.img, splashscreen.img into Flashtools folder ( in computer )
6. go to flashtools folder and then push button shift and right click together and choose “Open command windows here”, to start open CMD on the right folder (in computer)
7. Test your device by typing fastboot devices on that cmd (in computer)
8. Enter the queue codes on CMD; (in computer)
fastboot erase cache
fastboot erase userdata
fastboot erase system
fastboot flash boot boot.img
fastboot flash fastboot fastboot.img
fastboot flash splashscreen splashscreen.img
fastboot reboot-bootloader
8. Disconnect the USB cable and select the SD update or Recovery.
9. Take your coffee and sit, walaaaaaaa I see you are smiling
I am curious , is it work for others ASUS tablet? do with your own risk, but btw with this step I did wake up a hard brick devices.
Tag [ Asus memopad fonepad zenfone ME170 brick, bootloop, stuck on asus logo, boot problem, solved brick, guide how to]
So awesome you figured this out! Glad it worked out for you and I'll be saving this in case I find myself in the same boat. Thank you for this!!
Sent from my Nexus 6
K01A, aka ASUS MeMO Pad ME170CX
Prod date 2014-10 IIRC.
I appreciate you taking time to create this thread, have been unable to flash stock firmware to the ME170CX using just the ME170CX itself. ASUS website just mentions a SOP method and when I insert SD that has had the firmware files which have been extracted (1) time to the SD card, the prompt that is supposed to "pop-up" on the taskbar as mentioned in the PDF's I found online about the SOP method does NOT occur.
(I have 2 ME170CX's about 30-days old running 4.4.2, firmware Version WW_V11.2.3.27 in which one of them all the sudden the camera app crashes 100% of the time, then gives a "No camera is found" error message.
Beyond a hardware issue no-one knows what causes this beyond (1) poster that mentioned he thought problem first occurred after hitting the "Home" button right after hitting the cam icon and the thought is the app gets confused by this and the app/firmware for the camera gets corrupted.
Reset via OS itself. Wiping data and choosing "Recovery" in DROIDBOOT with "FASTBOOT" text at bottom of screen didn't make any difference. Camera is dead, dead, dead.
Figured I'd re-flash with same Version WW_V11.2.3.27, if that doesn't work try Version WW_V11.2.3.28 before RMA'ing it back to ASUS so I appreciate you listing the steps, and also attaching the needed files.)
***************
Question about Step 2, Please clarify:
2. Extract (archive in archive) and throws to the SD card. Rename the file to K017_sdupdate.zip and Insert the flash drive into a tablet. (Use good one SD card)
Click to expand...
Click to collapse
To clarify you are saying to extract the firmware from the "zip" package of zip that matches the firmware specific to the device from ASUS, which itself contains a zip file named IFWI.ZIP (1 ), one time, then rename the file named IFWI.ZIP (which contains 4 Bin files) to K017_sdupdate.zip.
Upon extraction process completing and renaming the zip you then copy the contents over to a known good MiroSD of at least 2GB which is formatted FAT32 to the ROOT of the drive.
IE: You do not extract the zip within the archive, you're just renaming IFWI.ZIP to K017_sdupdate.zip?
OR are you saying to extract the BINS also?
If so do these go in the ROOT of the SD card?
Another question, is there a reason for renaming IFWI.zip to K017_sdupdate.zip?
.
WeAreNotAlone said:
K01A, aka ASUS MeMO Pad ME170CX
Prod date 2014-10 IIRC.
I appreciate you taking time to create this thread, have been unable to flash stock firmware to the ME170CX using just the ME170CX itself. ASUS website just mentions a SOP method and when I insert SD that has had the firmware files which have been extracted (1) time to the SD card, the prompt that is supposed to "pop-up" on the taskbar as mentioned in the PDF's I found online about the SOP method does NOT occur.
(I have 2 ME170CX's about 30-days old running 4.4.2, firmware Version WW_V11.2.3.27 in which one of them all the sudden the camera app crashes 100% of the time, then gives a "No camera is found" error message.
Beyond a hardware issue no-one knows what causes this beyond (1) poster that mentioned he thought problem first occurred after hitting the "Home" button right after hitting the cam icon and the thought is the app gets confused by this and the app/firmware for the camera gets corrupted.
Reset via OS itself. Wiping data and choosing "Recovery" in DROIDBOOT with "FASTBOOT" text at bottom of screen didn't make any difference. Camera is dead, dead, dead.
Figured I'd re-flash with same Version WW_V11.2.3.27, if that doesn't work try Version WW_V11.2.3.28 before RMA'ing it back to ASUS so I appreciate you listing the steps, and also attaching the needed files.)
***************
Question about Step 2, Please clarify:
To clarify you are saying to extract the firmware from the "zip" package of zip that matches the firmware specific to the device from ASUS, which itself contains a zip file named IFWI.ZIP (1 ), one time, then rename the file named IFWI.ZIP (which contains 4 Bin files) to K017_sdupdate.zip.
Upon extraction process completing and renaming the zip you then copy the contents over to a known good MiroSD of at least 2GB which is formatted FAT32 to the ROOT of the drive.
IE: You do not extract the zip within the archive, you're just renaming IFWI.ZIP to K017_sdupdate.zip?
OR are you saying to extract the BINS also?
If so do these go in the ROOT of the SD card?
Another question, is there a reason for renaming IFWI.zip to K017_sdupdate.zip?
.
Click to expand...
Click to collapse
some firmware when you download it from asus site ZIP compresed twice, you can rename it directly from WW_V11.2.3.28.zip to K017_sdupdate.zip, if your device is K01A try to renaming firmware to K01A_sdupdate.zip and then put in SD card (do not created any folder in SD card ). the key to success is the SD card compatibility with ASUS DROIDBOOT, I was using Sandisk SD card. I did format fat32 the SD card and insert in another android devices first and then put the renamed firmware file there.
inside firmware file there is boot.img, fastboot.img and splashscreen.img you need to extract it in flashtool/fasboot folder and then flashing it your tablet. this trick to make firmware recognize correct devices to be update.
try again.
sevensvr said:
some firmware when you download it from asus site ZIP compresed twice, you can rename it directly from WW_V11.2.3.28.zip to K017_sdupdate.zip, if your device is K01A try to renaming firmware to K01A_sdupdate.zip and then put in SD card (do not created any folder in SD card ). the key to success is the SD card compatibility with ASUS DROIDBOOT, I was using Sandisk SD card. I did format fat32 the SD card and insert in another android devices first and then put the renamed firmware file there.
inside firmware file there is boot.img, fastboot.img and splashscreen.img you need to extract it in flashtool/fasboot folder and then flashing it your tablet. this trick to make firmware recognize correct devices to be update.
try again.
Click to expand...
Click to collapse
RE: boot.img, fastboot.img and splashscreen.img you need to extract it in flashtool/fasboot folder ???????
Having some progress, renaming ifwi.zip which contains (4) bin files when Recovery was selected caused the robot with the Updating System Settings to appear, but a couple of seconds later it said ERROR with the robot laying on it's back, then it exits. Device reboots as normal.
To clarify:
WW_V11.2.3.28.zip download from ASUS was extracted with a Windows computer,
WW_V11.2.3.28.zip extracting /creating following folders, files, then the contents were copied to the ROOT of a MicroSD card formated Fat32
1: boot.img, fastboot.img and splashscreen.img (TO ROOT)
2: ifwi.zip to ROOT. (contains (4) bin files, is this supposed to be extracted to I assume folder by same name off root? OR does this ZIP file just get renamed?)
3: System folder
4: Recovery folder
5: META-INF folder
I do not see a flashtool/fasboot folder. (Fastboot, right?)
Q: Is boot.img, fastboot.img and splashscreen.img supposed to be in a folder named "Flashtool" OR are they supposed to be in folder named "Fastboot" with a pathway of Root (Drive) D:/Flashtool/fastboot ?
.
(NOTE ALL OF THIS IS BEING DONE ON THE DEVICE ITSELF, with contents on SD card.)
Still getting the ERROR! message wit the Adroid robot that is laying on his back.
The zip file that extracts from the main zip WW_V11.2.3.28.zip is named:
ifwi.zip...
I have left a copy of it in the ROOT, plus copied it and renamed it to
K01A_sdupdate.zip
K017_sdupdate.zip
LEAVING COPIES OF ALL IN THE ROOT OF THE SDCARD.
Q: If more than (1) zip is present does this confuse fastboot? OR does fastboot automatically look for zip zip which matches model ID of device? (K01A)
I have left copies of boot.img, fastboot.img and splashscreen.img in the ROOT of the drive.
AND
Created: (ROOT) flashtools/fastboot with *img files in it.
Created: (ROOT) fastboot with *img files in it.
Copied the *img files to under "Flashtools" folder in flashtools/fastboot.
Figuring all the bases would be covered. (EG: *img Files in ROOT, files in Flashtools, Flashtools/fastboot, and a folder named fastboot as well.
Q: I've noticed on the SD card files appearing that previously were not there, when the flash aborts is there some kind of file or files you need to delete, or is it ok to leave the newly generated files there?
---------- Post added at 03:43 AM ---------- Previous post was at 03:37 AM ----------
Deleted:
ifwi.zip.
K017_sdupdate.zip
Tried:
K01A_sdupdate.zip
Still getting robot on it's back with ERROR!
who said you need to renaming ifwi.zip, What you need is read all instruction carefully,
do not put more than 1 zip file in SD card only firmware file which is already renamed to K017_sdupdate.zip, and use good brand SD card.
I successfully complete all step after "Installing system update" nothing change again stuck on asus logo.
commando987 said:
I successfully complete all step after "Installing system update" nothing change again stuck on asus logo.
Click to expand...
Click to collapse
when installing update, the robot end with error or not?, the installing bar moved till finish ? the installing process will take 3 to 5 minutes.
if you did all above and still got stuck on asus logo, try to change the firmware with this version UL-K017-WW-11.2.3.18.2-user, if succeed then you can continue with OTA system update
My Asus MemoPad ME170C has risen again!
sevensvr said:
After 3 days tried to find out how to recovered or fix bootloop/brick ME170C, here is the way which was succeed for me.
1. Download latest firmware from ASUS website
2. Rename the firmware file to K017_sdupdate.zip and put on SD card then Insert the SD card into a tablet. (Use good one SD card, Sandisk perfect I don't know others)
3. Download flashtools and USB driver at the bottom of this thread
4. Enter the DROIDBOOT, for this purpose on the tablet off push and hold button volume + and power then connect USB cable to tablet and PC.
5. Open your firmware archive and copy or drag & drop the boot.img, fastboot.img, splashscreen.img into Flashtools folder ( in computer )
6. go to flashtools folder and then push button shift and right click together and choose “Open command windows here”, to start open CMD on the right folder (in computer)
7. Test your device by typing fastboot devices on that cmd (in computer)
8. Enter the queue codes on CMD; (in computer)
fastboot erase cache
fastboot erase userdata
fastboot erase system
fastboot flash boot boot.img
fastboot flash fastboot fastboot.img
fastboot flash splashscreen splashscreen.img
fastboot reboot-bootloader
8. Disconnect the USB cable and select the SD update or Recovery.
9. Take your coffee and sit, walaaaaaaa I see you are smiling
I am curious , is it work for others ASUS tablet? do with your own risk, but btw with this step I did wake up a hard brick devices.
Tag [ Asus memopad fonepad zenfone ME170 brick, bootloop, stuck on asus logo, boot problem, solved brick, guide how to]
Click to expand...
Click to collapse
I bought my memopad 170c just a couple of days ago and because of excitement i flash the wrong firmware and it went dead i tried the recovery method but nothing happens i'm beginning to get nervous as this tablet is a gift for my daughter but thankfully i found this site especially to your instruction did every step with my finger crossed and like what you said sit back and walaaaaa! my tablet err my daughter's tablet has risen again. thank you for sharing your knowledge.
sevensvr said:
when installing update, the robot end with error or not?, the installing bar moved till finish ? the installing process will take 3 to 5 minutes.
if you did all above and still got stuck on asus logo, try to change the firmware with this version UL-K017-WW-11.2.3.18.2-user, if succeed then you can continue with OTA system update
Click to expand...
Click to collapse
Installing bar not complete at the end but not give error and restart. After restart stuck on asus logo. Now i download version UL-K017-WW-11.2.3.18.2 and check it.
mapagmatyag said:
I bought my memopad 170c just a couple of days ago and because of excitement i flash the wrong firmware and it went dead i tried the recovery method but nothing happens i'm beginning to get nervous as this tablet is a gift for my daughter but thankfully i found this site especially to your instruction did every step with my finger crossed and like what you said sit back and walaaaaa! my tablet err my daughter's tablet has risen again. thank you for sharing your knowledge.
Click to expand...
Click to collapse
you welcome friend
commando987 said:
Installing bar not complete at the end but not give error and restart it. After restart stuck on asus logo. Now i download version UL-K017-WW-11.2.3.18.2 and check it.
Click to expand...
Click to collapse
it seems the tablet didn't read your SD card, to assure SD card problem when the robot appear while system update press buttom vol + and - rapidly to show installing status.
if the tablet didn't read ur SD card try to use another SD card
BIG Thanks
I've been stuck with the bricked 2 day old tablet for at least 3 months. Today I did the procedure you described and it worked. I had to install version V11.2.3.18.2 and then, once unbricked, apply latest version update.
Again, thanks a lot!.. Best regards.
mnabarro said:
I've been stuck with the bricked 2 day old tablet for at least 3 months. Today I did the procedure you described and it worked. I had to install version V11.2.3.18.2 and then, once unbricked, apply latest version update.
Again, thanks a lot!.. Best regards.
Click to expand...
Click to collapse
happy to heard it
Hi, am trying to fix my ME170CX because an original root attempt that failed and am getting a demo error message that won't go away.
I tried following all your instructions to fix this but it gets stuck "waiting for device" once I begin entering the commands.
I have tried multiple sd cards (including a sandisk) and both the V11.2.3.27 & V11.2.3.28 firmware versions to no avail.
I also tried naming the zip file K017 & K01A.
I am also wondering why we need to download the USB driver file? I don't see anywhere in your instructions on what to do with this.
Any help would be greatly appreciated.
Mike
mashton70 said:
Hi, am trying to fix my ME170CX because an original root attempt that failed and am getting a demo error message that won't go away.
I tried following all your instructions to fix this but it gets stuck "waiting for device" once I begin entering the commands.
I have tried multiple sd cards (including a sandisk) and both the V11.2.3.27 & V11.2.3.28 firmware versions to no avail.
I also tried naming the zip file K017 & K01A.
I am also wondering why we need to download the USB driver file? I don't see anywhere in your instructions on what to do with this.
Any help would be greatly appreciated.
Mike
Click to expand...
Click to collapse
Youll want to get your answer from him but i think i may be able to help. You need to install usb drivers so you can access abd and give commands to your tablet. Which i think is why it just says waiting for device... I could be wrong though....
Sent from my Nexus 6
anthonyg45157 said:
Youll want to get your answer from him but i think i may be able to help. You need to install usb drivers so you can access abd and give commands to your tablet. Which i think is why it just says waiting for device... I could be wrong though....
Sent from my Nexus 6
Click to expand...
Click to collapse
OK, I finally got the usb drivers working on my computer and made it through all commands which is much further than I was getting before.
I got to step 8 "Disconnect the USB cable and select the SD update or Recovery" and selected "Recovery" in DROIDBOOT (I don't have an "SD update" option there) and after like 1 second of "installing system updates" I get the android falling over guy error and then it hangs on the asus splash screen for ever.
download ME70CX for ME170CX
anthonyg45157 said:
Youll want to get your answer from him but i think i may be able to help. You need to install usb drivers so you can access abd and give commands to your tablet. Which i think is why it just says waiting for device... I could be wrong though....
Sent from my Nexus 6
Click to expand...
Click to collapse
have you been able to restore it ?
Can NOT use download of ME170C
Use download of ME70CX. Just did it, and tablet back to "almost" normal.
I have wifi button issue now. Button is stuck.
bye
ydobon.999 said:
have you been able to restore it ?
Can NOT use download of ME170C
Use download of ME70CX. Just did it, and tablet back to "almost" normal.
I have wifi button issue now. Button is stuck.
bye
Click to expand...
Click to collapse
That did it!
I used the firmware ME70CX and renamed the file "K01A_sdupdate.zip" and followed all of the other steps as per the original instructions and got my ME170CX working again but for one problem. . . I was still getting the "demo has stopped" error! So I proceeded to attempt root again, this time with RootZenFone-1.4.6r and and now it's working perfectly and rooted as well!
Many thanks to all!!

Categories

Resources