No landscape menu?!:O - S740, S743 General

Hello!I got this device brand new have ROM version 1.15 from Italy and my device doesn`t have this menu in landscape is it posible?How could I make it work?

Start-->Settings-->Menu Action--> Activate "Show Menu action, when Keyboard is open".
Since I have a german S740, I'm not shure, if I use the correct translation.
Greetings from Cologne,
Arniebirdy

the only problem is i do not have that sort of settings in my settings menu?!..

Start/Setings/ACTION MENU/unchek end that is that

komunistvb said:
Start/Setings/ACTION MENU/unchek end that is that
Click to expand...
Click to collapse
I ain`t got that option

Hy!
Sorry for that Question but....have you look at ALL Setting-Pages?
You can Switch the pages by typing "Next" or 0 and on the Second Page there is the Setting you Search....
MFG

Enricosteph said:
Hy!
Sorry for that Question but....have you look at ALL Setting-Pages?
You can Switch the pages by typing "Next" or 0 and on the Second Page there is the Setting you Search....
MFG
Click to expand...
Click to collapse
I know but i looked in all settings but nothing i have the italian ROM the phone was boght from italy so i noticed that i have a newer version of the ROM so i think that this version of ROM doesn`t have landscape menu

Related

HTC keyboard dictionary

I installed a cab I found on this forum on my prophet VIII.
Then I installed gullum's page portuguese.cab for the same keyboard.
Problem is the language is not available in the xt9 language options for the htc keyboard/keypad.
Anyone had a clue?
found my answer here:
http://forum.xda-developers.com/showthread.php?t=343106&page=3
please... were can i find the files for pt language??
P4k1t0 said:
please... were can i find the files for pt language??
Click to expand...
Click to collapse
here:
http://rapidshare.com/files/68813010/DualOEMKeyBoard.rar.html
philocritus said:
here:
http://rapidshare.com/files/68813010/DualOEMKeyBoard.rar.html
Click to expand...
Click to collapse
Big thanks!
hi,
could you get it to work in your prophet?
I am having some problems with touch keypad. Only can get it to work good with touch keyboard.
regards
RP
tropheuz said:
hi,
could you get it to work in your prophet?
I am having some problems with touch keypad. Only can get it to work good with touch keyboard.
regards
RP
Click to expand...
Click to collapse
the files named on the post mencioned above refer only the 5X4 keyboard which is the htc keyboard. So the keypad is out of the picture here.
I'll see if I can find get it to work once I have some time at home since it shouldn't be too diferent from the keyboard.
ah ok, I suspected that too.
Do you think it's necessary to create new regestry keys for the target language in SIP\Bitmaps?
tropheuz said:
ah ok, I suspected that too.
Do you think it's necessary to create new regestry keys for the target language in SIP\Bitmaps?
Click to expand...
Click to collapse
Yes I do...
It's probably the same ones but when referencing keyboard you'll have to insert in the keypad section of the registry.
The files should be named something like 4X4 instead of 5X4 which is the key matrix.
found it
ok you only need to add \et9\Sip\KdbFiles a Reg key named 0AXX with value "12.pthpd.kdb" (this if for my language of course).
thank you
RP
tropheuz said:
found it
ok you only need to add \et9\Sip\KdbFiles a Reg key named 0AXX with value "12.pthpd.kdb" (this if for my language of course).
thank you
RP
Click to expand...
Click to collapse
Nice work since it's my language as well i'll rely on that one
ehehe
dont forget to include that file in windows directory.
regards
RP
tropheuz said:
ehehe
dont forget to include that file in windows directory.
regards
RP
Click to expand...
Click to collapse
I won't
when sending sms can you "search" contacts when inserting them in the "to:" block? before tx9 it used to sugest the possible contacts to use but now it doesn't :S
yes you are correct, since T9 I cant do that...
dont know what registry key is responsible for that, I will try to work that tonight.
regards
RP
tropheuz said:
yes you are correct, since T9 I cant do that...
dont know what registry key is responsible for that, I will try to work that tonight.
regards
RP
Click to expand...
Click to collapse
I fear it works only with simple word complete and not with tx9.
for example while working with touchpal i need to delete one char so that it starts suggesting contacts.

On 2.1 , just few questions

hi
2.1 is really great and phone is much better...anyway here are few questions
1.) how to lock the screen.. prev when i press the power button , the screen will go dark and it will lock the screen , how to do on 2.1 ?
2.) i am on 2.0.A.0.504 (Binary version of global firmware ) .. is this the latest i mean i read on a blog that "the latest certified build is 2.0.B.0.127" so is mine a beta firmware or the main release itself ?
3.)i am going to root next .. can any one explain me how to ? i mean how to use that adb ? and also what is the procedure to remove moxifier ?
4.) I am using launcher pro , is there a way to change the background of the menu( the icon back ground after pressing the main key ) its now black .. can i change to some wallpaper or any patterns ?
5.)currently the image in contact are pixeled , is that a bug ? or should i have to remove and put in a high res pics ?
thnks in advacne .. i will post question as i stumble on more ...
naveen_reloaded said:
hi
1.) how to lock the screen.. prev when i press the power button , the screen will go dark and it will lock the screen , how to do on 2.1 ?
Click to expand...
Click to collapse
The same.
naveen_reloaded said:
2.) i am on 2.0.A.0.504 (Binary version of global firmware ) .. is this the latest i mean i read on a blog that "the latest certified build is 2.0.B.0.127" so is mine a beta firmware or the main release itself ?
Click to expand...
Click to collapse
I've got the same version from SEUS, so guessing the latest.
naveen_reloaded said:
3.)i am going to root next .. can any one explain me how to ? i mean how to use that adb ? and also what is the procedure to remove moxifier ?
Click to expand...
Click to collapse
Sticky - 2.1 Root Method - Working on Nordic FW
naveen_reloaded said:
, use Titanium to remove apps.
4.) I am using launcher pro , is there a way to change the background of the menu( the icon back ground after pressing the main key ) its now black .. can i change to some wallpaper or any patterns ?
Click to expand...
Click to collapse
Yep, don't have it installed right now but look in the settings.
naveen_reloaded said:
5.)currently the image in contact are pixeled , is that a bug ? or should i have to remove and put in a high res pics ?
Click to expand...
Click to collapse
Not sure, try hi-res images and see if it makes a difference.
naveen_reloaded said:
thnks in advacne .. i will post question as i stumble on more ...
Click to expand...
Click to collapse
Do so only if your search and or browsing of the forum doesn't give you your answers.
actually pressing power botton doesnt do anything .. long press brings the shutdown menu...
help please
naveen_reloaded said:
actually pressing power botton doesnt do anything
Click to expand...
Click to collapse
Turns off the screen and locks for me.
XperiaX10iUser said:
Turns off the screen and locks for me.
Click to expand...
Click to collapse
For me too...
Sent from my X10i
--------------------------------------------------------------------------------
I have a few queries, please some one clarify
1) In the lock screen there are few lines like "This phone belongs to", An alaram icon and "protested by antivirus". Can we able to change these?
2) While charging there is a battery icon in lock screen that shows battery level but after charging its not showing. Is there any way to show these.
3) Is there anyway to edit Status switch widget. I need only few from that.
4) I am actually using only 4 home screens, is there anyway to edit and remove the last one like in ADW launcher.
5) User guide is not working "Cannot find user guide on memory card ....." But I did not delete it and user guide is still showing in Ti backup. How to fix that.
How do you get to service menu now?
Sent from my X10i using XDA App
NightSidew1nd3r said:
How do you get to service menu now?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
..........
marcbrophy said:
I just figured it out there.
It's now the middle 'home' key instead.
So it's Home, Back, Back, Home, Back, Home, Home, Back.
Worked for me anyway
Click to expand...
Click to collapse
Thanks mate
Sent from my X10i using XDA App
senthilanandhpv said:
--------------------------------------------------------------------------------
I have a few queries, please some one clarify
1) In the lock screen there are few lines like "This phone belongs to", An alaram icon and "protested by antivirus". Can we able to change these?
Click to expand...
Click to collapse
Is your X10 first hand? Did you install any antivirus app from the market?.. and there's another app which can add that line to the home screen, forgot the name.
i deleleted few apps and landed being not able to boot into the phone... luckily my phone was recognised thru SEUS , so did a repair / reinstall of the firmware.. now everything is fine including the power button press....
the root was also fine ...
@XperiaX10iUser
how to change the menu background in launcherpro with some patterns or wallpaper .. the default black is kind of irritating..
senthilanandhpv said:
I have a few queries, please some one clarify
1) In the lock screen there are few lines like "This phone belongs to", An alaram icon and "protested by antivirus". Can we able to change these?
Click to expand...
Click to collapse
Guess, I can help you with that.
1. Go to your main menu and open AntiVirus App.
2. Click menu key on your phone (the physical key left to home key) and click on 'Settings'.
3. Go to 'Remote Management' and click 'Lost Message'.
4. You can edit the 'Text before' and 'Text after' in there and look at the preview how will it look on lock screen.
Mine now reads -
WELCOME
---
*My Name*
It is a really cool trick to make your 'Apple Fanboy' friends jealous!!! hahaha
How did you get 2.1 for India.
Ace F355 said:
Guess, I can help you with that.
1. Go to your main menu and open AntiVirus App.
2. Click menu key on your phone (the physical key left to home key) and click on 'Settings'.
3. Go to 'Remote Management' and click 'Lost Message'.
4. You can edit the 'Text before' and 'Text after' in there and look at the preview how will it look on lock screen.
Mine now reads -
WELCOME
---
*My Name*
It is a really cool trick to make your 'Apple Fanboy' friends jealous!!! hahaha
Click to expand...
Click to collapse
Cool feature. Thanks..
@isthisreallife
I flashed to generic Global
@senthilanandhpv: Link please
isthisreallife said:
@senthilanandhpv: Link please
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=825675
Adobe Flash 10.1 ?
Hey,
Has anyone tried installing Flash yet?
Found this old thread for the dev versions of Flash 10.1 (I know general release is for 2.2), but thought this may work?
www dot addictivetips dot com/ mobile/ how-to-install-flash-10-1-on-android-2-1-eclair-devices/
Anyone with 2.1 wanna give this a whirl?
(I'm tempted to flash to generic Nordic, but rumors have the generic UK in 2 weeks, so may just wait...)
Thanks!
Stu
naveen_reloaded said:
@XperiaX10iUser
how to change the menu background in launcherpro with some patterns or wallpaper .. the default black is kind of irritating..
Click to expand...
Click to collapse
I don't use it sorry, ADW ftw.
dont know .. now my wifi is not working . i mean it says DISCONNECTED after scanning ...
what to do ?

[SOLVED] SE Xperia X10 mini pro with GingerDX v21b - "Sym" key not working properly

[SOLVED] SE Xperia X10 mini pro with GingerDX v21b - "Sym" key not working properly
I've looked for a solution o a similar question, but i think there isn't another post about this issue. It's my first post about a problem I can't solve, although I have used this ROM since version v009 (good job, devs!), because I fixed all other problems (e.g. keybord lights and notification leds) thanks to questions sent by others o tips found on forum.
This time, upgrading from a previous version of GingerDX for SE Xperia X10 mini pro (I think v013) to the newest v21b, the "Sym" key (that one on the right) doesn't work properly, but it just do the same action of the blue key on the left, whereas the "Sym" key should show the symbols menu on screen or the alternative characters (holding down the "Sym" key and typing a letter). I don't remember if this problem affected the previous versions, but I'm unable to solve it now. I tried to wipe cache and Davlik cache (in addition to factory reset) before re-flashing the ROM and I tried also to switch between the two keybords (Android and HTC) which are pre-installed, but nothing happens and the behaviour of the phisical keybord is the same, with no change.
Could anybody help me to solve my problem? I like this ROM so much so I don't want to change.
Thanks in advance and thanks a lot to the developers who worked on this ROM
P.S.: Sorry for my bad English.
I usually disable the 'android keyboard' and any other installed keyboards, ensure that 'default input' remains checked. Thats the only way I can find to keep the Sym key working as it should.
Sent from my U20i using Tapatalk
obsidian_eclipse said:
I usually disable the 'android keyboard' and any other installed keyboards, ensure that 'default input' remains checked. Thats the only way I can find to keep the Sym key working as it should.
Sent from my U20i using Tapatalk
Click to expand...
Click to collapse
I'm sorry, but I can't find the option 'default input', where is it?
John.droid said:
I'm sorry, but I can't find the option 'default input', where is it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=21558589&postcount=439
rosshalz said:
http://forum.xda-developers.com/showpost.php?p=21558589&postcount=439
Click to expand...
Click to collapse
Thanks for the reply.
I already tried it, but 'Input method' shows only the two keybord i said in the first post... 'Default Input' is disappeared. -.-"
Is there anybody who use this version of GingerDX?
As far as I know GingerDX v21 don't have default input added
RF-XDA said:
As far as I know GingerDX v21 don't have default input added
Click to expand...
Click to collapse
But in old versions the "Sym" key has always worked properly... Could you say me how to add this "default input" (if there is a way to do it), please?
John.droid said:
But in old versions the "Sym" key has always worked properly... Could you say me how to add this "default input" (if there is a way to do it), please?
Click to expand...
Click to collapse
You need to download this file from atachments and flash it via CWM or xRecovery.
This is file from 1st post of rom that you are installed.
After you flash this file, you can select default input.
HooLIMAN87 said:
You need to download this file from atachments and flash it via CWM or xRecovery.
This is file from 1st post of rom that you are installed.
After you flash this file, you can select default input.
Click to expand...
Click to collapse
Thanks a lot. It solved my problem!
I read it, but it says "Optional for default keyboard - with this you'll get rid of language bar on default keyboard", nothing about adding the default keybord
John.droid said:
Thanks a lot. It solved my problem!
I read it, but it says "Optional for default keyboard - with this you'll get rid of language bar on default keyboard", nothing about adding the default keybord
Click to expand...
Click to collapse
Yeah, and the only "problem" is that you can't see language bar. But that's not a problem
HooLIMAN87 said:
Yeah, and the only "problem" is that you can't see language bar. But that's not a problem
Click to expand...
Click to collapse
Language bar disappeared? problem? what problem?! That's not a problem at all Thanks again!
Do I have to do backup of my phone?
Does applying of optional default keyboard erase data? (I really want to get rid of this stupid language bar..)
maseer2 said:
Do I have to do backup of my phone?
Does applying of optional default keyboard erase data? (I really want to get rid of this stupid language bar..)
Click to expand...
Click to collapse
Don't worry, it doesn't affect your data Do a backup for security (it's always a good thing, but it is not necessary)
John.droid said:
Don't worry, it doesn't affect your data Do a backup for security (it's always a good thing, but it is not necessary)
Click to expand...
Click to collapse
thank you very much.. I wasn't sure now the language bar is finally gone
maseer2 said:
thank you very much.. I wasn't sure now the language bar is finally gone
Click to expand...
Click to collapse
You're welcome, we are here to help each other
Hi!
I have the same problem. But multiupload.com is down, so I can't download the default keyboard fix.
Could anybody be so kind and reupload it somewhere else?
Thanks and regards
Hi,
I have one more question: Can I use this language bar fix also on MiniCM7-2.1.9 ? (I changed ROM few days ago)
the links are broken

Annoying problem: red underline for misspelled words...PLZ HELP!

How can I disable red underline for misspelled words? and actually any word that I'm Typing (SMS / BROWSER etc.)
I'm after full ODIN stock ROM >> than full wipe & TurkbeyRom Ics V9 4.0.3
never had that before
any one can help ?
it sounds like the keyboard has the wrong language, what does it say in the settings screen ?
ever tryed another keyboard ?
LAggyman said:
it sounds like the keyboard has the wrong language, what does it say in the settings screen ?
ever tryed another keyboard ?
Click to expand...
Click to collapse
already tried that-thx
1/ changed language
2/ changed keyboard
didn't help
Is it the spell checker? In keyboard settings you can disable it
Sent from my GT-I9100 using XDA
kilometers4 said:
Is it the spell checker? In keyboard settings you can disable it
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
should help...but it doesn"t help
looking for another reason. I didn"t change anything just upgrade rom
yaronAD said:
should help...but it doesn"t help
looking for another reason. I didn"t change anything just upgrade rom
Click to expand...
Click to collapse
Did you try to turn it off though in keyboard settings?
Sent from my GT-I9100 using XDA
yaronAD said:
How can I disable red underline for misspelled words? and actually any word that I'm Typing (SMS / BROWSER etc.)
I'm after full ODIN stock ROM >> than full wipe & TurkbeyRom Ics V9 4.0.3
never had that before
any one can help ?
Click to expand...
Click to collapse
do you have spelling correction in "Settings->Language & Input"?
if yes then untick that option then spell correction will be disabled.
this is a new feature in ICS if you tab on underlined word it will show you spelling suggestion similar you can see in MS Word on windows.
it its not there then there is some issue with framework.jar
if you want to enable this feature then you can visit my thread
http://forum.xda-developers.com/showthread.php?t=1641988
if above setting is not present and you do not want to use this feature then copy setting.apk from said post and then you will find Settings->Language & Input -> Seplling Correction" untick that option.
Hope this will resolve this issue. but for me spellchecker is a really good thing to have in ICS.
Thanks
Pawandeep
pawandeep said:
do you have spelling correction in "Settings->Language & Input"?
if yes then untick that option then spell correction will be disabled.
this is a new feature in ICS if you tab on underlined word it will show you spelling suggestion similar you can see in MS Word on windows.
it its not there then there is some issue with framework.jar
if you want to enable this feature then you can visit my thread
http://forum.xda-developers.com/showthread.php?t=1641988
if above setting is not present and you do not want to use this feature then copy setting.apk from said post and then you will find Settings->Language & Input -> Seplling Correction" untick that option.
Hope this will resolve this issue. but for me spellchecker is a really good thing to have in ICS.
Thanks
Pawandeep
Click to expand...
Click to collapse
THX M8!
I copied your setting file over mine - didn't help and got FC
I don't have the spell correction feature
yaronAD said:
THX M8!
I copied your setting file over mine - didn't help and got FC
I don't have the spell correction feature
Click to expand...
Click to collapse
Please send me your settings.apk and framework.jar; I will update it for you
however wanamlite is using my mode for all his roms if you wish you can give a try.
Thanks
Pawandeep
pawandeep said:
Please send me your settings.apk and framework.jar; I will update it for you
however wanamlite is using my mode for all his roms if you wish you can give a try.
Thanks
Pawandeep
Click to expand...
Click to collapse
THX M8 !!!
Here are the 2 files = in 1 zip file
( I'm using TurkbeyRom Ics V10 4.0.3)
THX FOR YOUR HELP
Solution
Hi!
I have the very same problem as I speak with my friends in 4 different languages. After a lot of search I found the solution to completely disable the red underlining: selecting "Alphabet" (QUERTY) as your keyboard language, as I describe below:
1 Download the "Google Keyboard" app from the google Play
2 Go to keyboard settings - in lollypop it is under Settings > My device > Language and Input
3 Enter into "Google Keyboard" to show the google keyboard settings, and then go into "Languages"
4 Disable "Use system language" and ONLY enable "Alphabet (QUERTY)" from the list of languages (you will probably find it between Afrikaans and Arabic)
5 Go back again to Settings > My device > Language and Input, enter "Default" and select "Alphabet (QWERTY)" as default
VoilĂ !

[Q] Can't use 2 kanguages in keyboard after update

Hi,
I just upgraded a galaxy s3 I9300 to stock rom 4.3, and there is a problem with the keyboard.
The problem is that it doesn't let the user change input language (in this case between Hebrew and English).
I search all over the settings, and nothing helps.
There should be an option to change input language by swiping the space button...
Am I missing someting here ?
frliran said:
Hi,
I just upgraded a galaxy s3 I9300 to stock rom 4.3, and there is a problem with the keyboard.
The problem is that it doesn't let the user change input language (in this case between Hebrew and English).
I search all over the settings, and nothing helps.
There should be an option to change input language by swiping the space button...
Am I missing someting here ?
Click to expand...
Click to collapse
Hey man, look at my solution in this thread: http://forum.xda-developers.com/showthread.php?t=2577505
PS- next time use SEARCH
Factory reset ? really ?
frliran said:
Factory reset ? really ?
Click to expand...
Click to collapse
Yes, or install note 3 keyboard if you have deodexed rom
Sent from my GT-I9300 using Tapatalk

Categories

Resources