It has been over the month for my HTC Diamond 2, I want to get full case for it and do what ever is possible with it to maximize it.
What do you recommend?
I was thinking invisible shield full body. What else would you add to this list?
A mini-usb adapter probably, mini-usb to 3.5mm.
AetieQ is right.. mini adapter is really useful!! i got 1.. how bout capcase??
I think invisible shield by ZAGG is the most important accessories too.I got the full body last month.It is the best case I have ever seen.
Mine would be the hard case or at least a cheap leather case..
this is what i've ordered from amazon few days ago:
Desktop cradle - there are many variations, mostly different in shape. Note that htc cradles cost about triple the time...
Air-vent mount holder - for those that don't like the whole stick of most widescreens .
ZAGG shield - ofcourse.
And a car charger.
krylovpro said:
this is what i've ordered from amazon few days ago:
Desktop cradle - there are many variations, mostly different in shape. Note that htc cradles cost about triple the time...
.
Click to expand...
Click to collapse
That link is for the Touch Diamond cradle, does it fit the TD2 ?
Am using the soft plastic body casings. I used to use the Silicone variants on my HTC touch but they stretch after a while and have to be replaced. They also trap alot of dirt. Just look up HTC Diamond 2 soft plastic cases on ebay, they are inexpensive and are excellent protection. I dropped my BRAND NEW TD2 yesterday and the casing protected the phone, not a ding or dent. That's my must have accessory!
MrGubby said:
That link is for the Touch Diamond cradle, does it fit the TD2 ?
Click to expand...
Click to collapse
DUH! I didn't notice that
But here's the TD2 version: http://www.amazon.co.uk/iTALKonline...4?ie=UTF8&s=electronics&qid=1253622044&sr=1-4
The car charger reminded me of something...
The other day I was leaving for school and noticed that my battery was almost out. So I remembered that I have a cheap USB-MP3-Stereo in my car so I grabbed the usb-cable from my computer and headed for the car. So I plug the other end on where the usb memory stick is usually in and the other end on my TD2. The phone prompted me on what mode to use so I selected the mass memory. As It turns out, I could recharge my phone at the same time I was blasting the songs on my phone out of the speakers. I was really impressed
My must-have accessories for my new HTC Pure would include the following:
--full body Zagg Skin
--Silicone body skin
--Carrying Case; my preference is a horizontal leather with both clip and belt loops
--Multiple USB to 3.5 mm adapters; keep one in the cars, on the motorcycle, wherever I may find myself. They're cheap and very useful
--Battery charger; either the rechargeable kind or the one that runs off a AAA battery that also doubles as a flashlight. I have both
--Several earphones; same idea as the USB adapters.
I have wired remote yet, just perfect. using my topaz as player without touching and turning the screen off... (using with pocket player)
Related
Hi,
Here it is from Clove!
http://www.clove.co.uk/viewProduct....&product=1D0A78F8-C643-40C0-A006-1157B4C8200C
£45.83 inc VAT
A bit expensive considering their active car holders are usually £33-ish.
Will defo get one when it is available in more places!
If anyone has got one already, please post a review
Thanks.
i have a Brodit passive holder....
just a quick comment on it..
I have had a brodit holder for every PDA i have had for the last X amount of years and have never been unhappy in the least bit...
When i picked up the holder for the TC from the local shop here in Sweden, I looked at it and said "boy that looks tiny".... i thought maybe my head was playing tricks on me...
i took it out of the package at the counter and tried to shove my phone in it.... I would have needed a crow bar, and elephant and some butter to get it in there....
luckily the shop that i bought it from also doubles as a car stereo installation/ car mod shop.....
one of the guys from the shop was there and whisked me into the back and got out his heat gun and heated it up and together we made it fit to a T.
now it is perfect and i love it....
(i wonder, did brodit try to make this only with dimension from HTC, or had they an actual unit during their manufacturing process???)
anyway now i am once again a satisfied Brodit customer....
Proclip
I just got my holder yesterday. While tyhese are a little more than all the others I have seen it looks to be about the best holder I hqave ever had. I had one of the cheap ones off ebay and it broke already. This one seems to be very well made. They offer a few different models for the TC. With or without tilt or charger. I got one with the tilt and I like it. For what these phones cost it is worth it to get a quality holder for the car.
This my carholder-active, orginal for P3300
I got the Brodit as well as I've used them before and they are really well made....that is, except for this one which is as tight as you like. The o2 orbit2 does not fit it properly and I'm now having to debate sending it back vs. finding someone with a heat gun !!!!
In fact, I returned it and have just received another one....problem is that this one is even tighter. Will now have to find someone with a heat gun !!!!
Mine is a tight fit too but far better than the one I had for my last pda. If it isn't tight it buggers up the mini usb connection. The fitting kit for the car works fine too but it would have been better if the curley cable was shorter and the straight bit from the mount was longer just to make it easier to route the cable.
If you're looking for a car holder for the touch cruise, go to best buy in the auto dept., look for one made for the iphone and ipod both. It is around $12 and clips onto your air vent. The cruise fits in it perfectly.
This is the stuff I have bought for my G1.
I will post pics, to try and help anyone trying to make a decision on what to buy.
(alot of credit goes to ITSMEMORPHIUOS on youtube, He reviews iphone stuff. and through his reviews I got the confidence to buy half this stuff)
1) MOSHI case (ipouch=for iphone)= fits G1 perfect: excellent "everyday" case. Has special cloth sewn on inside that really cleans your G1. www.moshimonde.com (f**K IPHONE, had to get that out of my system). Washable, extra pocket for headphones. comes with really nice lanyard (to whip your kids with). SEVERAL LAYERS OF VERY THIN FABRIC NOT BULKY AT ALL.
2) niteize s-biner, size #1= to hang on moshi case
http://www.niteize.com/productdetail.php?category_id=29&product_id=152
3) SENA case= ULTRA slim case=, executive case REMOVED!!! NO NEED FOR COMMENTS LIKE THAT/THIS!!!!. www.senacases.com
4) SEIDIO retractable USB cable= it's ok, kind of short only 2'. really handy to carry though.
5) Cellet retractable wall charger.= travel charger, (*NOT TO SURE ABOUT THIS ONE, ONLY 500mA). BUT the car charger looks like a excellent product (but at the same time looks like a d*ck and balls????). (wish I had a car)
6) ZAGG invisible shield. OK ready, great protection, very UGLY look. DO NOT USE THE SCREEN PIECE.
---USE www.powersupportusa.com CRYSTAL FILM instead, can't even tell something is on the screen.
WHY: the Zagg gives orange peel affect (distorts image), Also you can see adhesive acts like little prisms and distorts image.
---Also I covered my wife's phone with Zagg completely and it totally takes away from the phone (women!!!).
--------SO on my phone I just used two small stripps on where the phone makes contact with a surface. much better look.
TIP: buy 70% isopropyl Rubbing alcohol from local pharmacy( will cost $1-$2 for huge bottle), same stuff that is in expensive computer screen wipes. But find good lint free cloth.
spray phone:
1) to clean
2) can apply crystal film when wet with alcohol
This is not a purchase but a great tip:
7) Piece of leather cut 4" x 6" ( and old leather jacket will do) great place to rest your phone while charging.
8) Turbo Charger= on the go, emergeny charger(uses AA)
9) AMZER 82000= cradle. ( got extra battery from t-mobile for free) still waiting for it to arrive in mail.
http://www.amzer.com/accessories-de...el=T-Mobile G1&mcid=1&category=&make=T-Mobile
10) sandisk 16 GB microsdhc = must have= works.
If you have any questions about these items, let me know, hopefully it will help you make your decision.
Oh and this is my first post with pics sorry if i F it up.
PICS are here
http://www.flickr.com/photos/[email protected]/
the pics were to big. see enlarged pic for details and don't forget to click on second page.
more pics, more pics, more pics
more pics, more pics and more pics
A bit G1 obsessive if you ask me, but I can see y, I love my phone too. But I dont think all the cases/pouches r necessary.
I didnt like the bulk of the pouch it came with. so I got the sena case, but
the sena case is very slim line and doesn't cover the phone 100% and you have to break it in to use it.
So then I ended up with the moshi pouch (black pouch), which is good to just throw around, phone slides in and out of it with ease. (the gay pink or peptol bismol one is my wife's).
I'm getting the same cradle. Do you know if the phone fits in it without removing the USb cover?
you don't have to take off the little cover there is little space for the little cover to sit within
Great, thats what I was worried about.
For the cradle can you charge the G1 and the spare battery at the same time? I was just wondering because I bought a crappy dock a while back and I could only charge the battery with the dock and had to connect a usb cable to charge the phone. Also is it hard to put the G1 in the dock or is it pretty easy. Thanks for the info man
AMZER 82000= cradle
http://www.amzer.com/accessories-de...el=T-Mobile G1&mcid=1&category=&make=T-Mobile
I got mine off of ebay, from Hong Kong, so I did not have the pleasure of unboxing ( came in Manila Envelope). But saved a couple of bucks.
NO IT IS NOT EASY TO PUT PHONE IN AND OUT. if you plan on using phone alot it is not easy. but if phone just sits in one place and you have bluetooth headset then it's OK. There is nothing wrong with cradle, The problem comes in with the little door has to be opened, then lowering the phone onto little usb connector. It's great for people who have there own desk at the office.
Comes with:
1) cadle: nice build quality (for made in china cradle),has charger port, usb port and 3.5mm stereo out. fingerprint and dust magnet. but I'm happy with product.
Blue and red led indicator on front of cradle, very bright. Might have to cover at night.
BLUE: glows when charger is plugged in. even if there is no phone or battery in charger.
RED: glows when battery is charging.
2) wall charger: 1.5 AMPS, nice can charge battery and phone at same time.
3) usb cable.
more pics of cradle.............
Where did you get that cradle?? OMG, I was just tell ing my friend I needed a cradle that had a charge port AND an audio out port. That's so freaky.
Doesn't look nearly as nice as yours, but all I really want is to be able to put in in the cradle on my dresser and plug my speakers into it. WOuld this work?
http://tinyurl.com/dxfge8 ?
http://cgi.ebay.com/USB-2nd-Battery...|66:4|65:12|39:1|240:1318|301:0|293:1|294:200
got cradle off of ebay. came from hong kong.
omg, love the cradle! I wish we had bluetooth stereo headphones capabiliy (A2D2). this would be perfect for that. I could just use it to charge my spare battery while streaming music or just get the giant 2400 mAh battery. What do you guys think?
How well does the Crystal Film screen shield fit on the g1, since it's made for the iPhone? My stock screen is getting really scratched up and I desperately need a new one, and you seem to have done your research
Also, I have been thinking about buying the cradle as well, and I have an extended battery that I use as my backup, and since the g1 won't fit on the charger with the extended battery on, I'd like to be able to place it on the extra charger, I just wanted to make sure it'd fit
I too am loving my cradle. Also wishing for Bluetooth Stereo. We'll see what this month brings I guess.
CRYSTAL FILM: was from powersupportusa.com But I don't see it on their website anymore.
It has an exact fit and is very smooth, people can't even tell i have a film on.
CRADLE: yes the extended battery fits in the back part of the cradle. the only thing is you cant close the back cover of the cradle.
You can put the phone and the extended battery (in the back part of the cradle with the cover door open) in at the same time.
Thats one spoiled-lucky G1 hahaha.
can someone post a working link to one of those cradles for me.. thanx a lot
I love using my hd to watch movies hooked up to aux input in my car,
I got one of these of ebay:
http://cgi.ebay.co.uk/NEW-CAR-CHARG....c0.m14&_trkparms=65:1|66:2|39:1|293:1|294:50
its already snapped!
I want something that allows you switch between horizontal/vertical and tilt funtion for tomtom and core player
I may try velcro stickers or maybe an air vent holder
any other ideas?
I have had 2 of these..they are absolutely rubbish, the insertion clip snapped both times. I have also tried another holder (universal one) and that turned out to rubbish too, I threw it away. Another time the suction disc came away from the arm. I have also tried my own custom made holder - I took a leather phone case and screwed it into the back of the arm attachment, that worked much better than the worthless gadgets of ebay. So save your money and forget buying from ebay, it maybe worth spending a bit more for a better quality item. And just yesterday I found my my xda orbit holder provided by O2 so using that for now which fits the Touch HD very well.
My side I buy that for my car Car Windshield Swivel Mount Dock for HTC Touch HD. At 5.60$ nobody can make better!
Work like a charm!
KaNiMziE
I had a universal jobby off ebay, that was a bit rubbish since where it clamped onto the phone it obscured the volume control buttons.
Ordered one of the HD specific designed ones and will see how that goes.
KaNiMziE said:
My side I buy that for my car Car Windshield Swivel Mount Dock for HTC Touch HD. At 5.60$ nobody can make better!
Work like a charm!
KaNiMziE
Click to expand...
Click to collapse
I've had two of these and on each occasion the clip broke, it's useless!
If anyone is still searching
I've got a magnetarm for my HD combined with a metalpad. Works fine and you can rotate your pda in any order.
http://www.amazon.de/MAGNET-HALTERUNG-T-Mobile-Compact-Autohalterung/dp/B000RXZUPA
I will mounting this one Car Portable Device/Gadget Holder and Windshield Mount
and after then when I use it, I tell you
laguna33p said:
I've had two of these and on each occasion the clip broke, it's useless!
Click to expand...
Click to collapse
I have it for 3 weeks now and no trouble at all, very fast delivery and safe, only 2 weeks at my door....
KaNiMziE
http://forum.xda-developers.com/showthread.php?t=533649
Brodit holder + charger
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Pro Clip makes some amazing solutions. I have used them for years on numerous devices.
Balthazar81 said:
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Click to expand...
Click to collapse
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
DontHate said:
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
Click to expand...
Click to collapse
Goes pretty fast. Haven't done any comparison, but I can't complain. I normally drive 45 minutes to work and twice a day charging is fine for me.
Balthazar81 said:
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Click to expand...
Click to collapse
got one as well it pricey but well worth it
mrobo said:
I will mounting this one Car Portable Device/Gadget Holder and Windshield Mount
and after then when I use it, I tell you
Click to expand...
Click to collapse
I like the look of the solid mount to the screen, but the holder looks a bit busy.
How have you found it?
Paul.
I got my own here www.mobilefun.co.uk
In this page you can find just about everything you need for your touch hd or any other phone... Bad thing deliveries are done only within the EU countries
The link for the holder i personally purchased and i'm 100% satisfied is here:
http://www.mobilefun.co.uk/htc-touch-hd-car-holder-p19992.htm
If you are looking for something a lot cheaper that goes with a car charger in the pack you can look here:
http://www.mobilefun.co.uk/drivesafe-car-pack-for-the-htc-touch-hd-p20932.htm (only difference with the first one is a little more stiff on adjusting method) but its still perfect and safe & both are really easy to adjust horizontally and vertically the phone & they are both built for windshields which means you can video type your driving
I suggest it without second thoughts!
DontHate said:
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
Click to expand...
Click to collapse
Got the same one. Pricey but oh so worth it. I love it,and would def recommend it. I've tried the suction ones, and they for some reason keep falling off the windscreen, even with cleaning the surface/drying it etc.
The brodit just clips into your dash, and fit your touch hd perfect. They make mounts for every car.
I love it!!!
And it charges at a normal rate, just like a standard wall charger.
I have this one and it's excellent..
Brodit holder question
I have a cheap universal effort I bought from some motorway services - Im looking for a better solution - im using airvent attachment - its a three pronged affair which clips over one of the vent "stays". Its wobbly as hell - which is fine most of the time, except when you are attaching the charging cable. Does the Brodit attach to the airvents ? if so does it attach solidly ? in a better way than my three pronged clip ??
Depending on your car and which mount you want.
For my Xantia, using the vent beside the steering wheel the mounting plate fits in around the vent, between the vent unit and the dashboard body, rather than the cheapo ones that clip feebly to the vent.
At the moment I'm using two of the suction cup ones that people have had problems with.
Superglue is your friend (no, do not superglue it to the windscreen no matter how temping that sounds!).
The internal flange which holds the silicon cup to the base of the arm breaks up causing it to regularly fall off teh windscreen, some good superglue carefully dripped in fixes this. The other problem I've had is the ends breaking where the metal snake fits in, again superglue (pull back the concertina cover) in each end sorts this.
Ok these are things that should not go wong in a good product, but when they're available for a couple of quid shipped from China, it's to be expected, and thankfully easily rectified.
Has anyone got the details of a UK supplier of Brodit?
http://cgi.ebay.com/ws/eBayISAPI.dl...38080&ssPageName=STRK:MEWNX:IT#ht_3651wt_1260
Found this car mount for the G1. As opposed to the universal ones which are significantly bulkier and honestly dont look that good. This one is sleek and will let you open the G1 to keyboard mode without undocking he phone.
I've ordered it. I'll let you know in a few weeks
Any updated?
This thing looks great and cheap!
Nope. Thats the downfall with getting things from HK off Ebay. Takes forever.
I will post a review maybe take some pictures. I really hope it lets me open the screen and use it full out.
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
Thats the downfall with getting things from HK off Ebay. Takes forever.
Click to expand...
Click to collapse
True!!
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
Click to expand...
Click to collapse
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
tehseano said:
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
Click to expand...
Click to collapse
I don't own one 'yet' because the site says it will be available around 12/30. Looking at the pic, it doesn't seem to interfere with the operation of the phone... meaning you can still slide it open as well as charge it.
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
I got this one to use in my car and love it! Charger fits in and it can be rotated in any direction. Plus you can move it from car to car without messy window rings. http://www.amazon.com/gp/product/B001UGMTKC/ref=oss_T15_product
mrhousto said:
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
Click to expand...
Click to collapse
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
billquinn1 said:
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
Click to expand...
Click to collapse
You can never go wrong with a dremel tool!! I didn't know that those ebay holders cover up the speaker too. It kinda makes the phone useless while its in there. I got the idea for the one I made off the proclip website. Rather than spending $30 bucks for theirs, I just made my own! I popped the trim off from around the heater/radio and used 3M double sided tape to secure the metal bracket that I bent to shape. Then used another piece of 3M to secure the back portion of the clear cover to the bracket. Of course, I put the 'Dual' sticker on there just for kicks!!!
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
tekkitan said:
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
Click to expand...
Click to collapse
A little pricey..... I guess!
hi all, i got myself one of these and it comes with a car charger. though i found the cord was not long enough from my cigarette lighter to windscreen.
http://www.amazon.co.uk/Dedicated-W...3?ie=UTF8&s=electronics&qid=1262888830&sr=8-3
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
**Unable to post link due to my restrictions I guess. See mrhousto's original post**
mrhousto
Click to expand...
Click to collapse
So I didn't see anyone comment on this yet. But I went ahead and bought this due to the decent price and what appeared to be the ability to open it while mounted.
So the answer is definitely "yes" to everything I wanted from it.
Yes, it does allow you to open the screen while mounted.
Yes, the clip does hold the phone very well and it is pretty easy to put and remove the phone with one hand.
Yes, you can plug in a charger while mounted and you don't have to remove the little charger door to use it.
Yes, there is a hole in the back so the speaker/camera is exposed so I guess you could record video, or take pictures while driving if that is something you wanted to do. Also, the microphone on the bottom is not blocked in case you want to just use speakerphone while mounted.
Yes, it feels very solid and well made. It says it "Made in Germany" on all of the parts which makes me feel good. "The German's make good stuff!"
Yes, The body clip itself does come off the arm so you could in theory use this for a different phone assuming you can get just the body clip online.
No, you cannot use this with anything other then a regular sized battery/door. (hopefully this was obvious)
Overall, for $20-$25 (depending on shipping), this is an awesome mount for your G1. I haven't actually tried mounting it on my window yet but the big suction cup (~3 inches wide) with the pull lever thing look like they will work great.
Boogy
Ather said:
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
True!!
Click to expand...
Click to collapse
I order this one and finally got it.
It doesn't seem to fit in the way the picture is. The picture shows the "big" tab at the bottom. The problem with this is that it covers the hole for the charger. Also for me it doesn't quite fit so the top tab doesn't clip on to anything and doesn't hold the phone.
If I put it in upside down then the small tab doesn't cover the hole for the charger and it seems to fit nice an snug. But when it is in upside down you can no longer slide it open as the bigger tab is clipped onto the front. That is no big deal for me any ways as I don't plan on opening it while it is in the holder in the car.
the perfect mount/ who needs a navigation system
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
zodagreat said:
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
Click to expand...
Click to collapse
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
benmyers2941 said:
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
Click to expand...
Click to collapse
thats nice and everything, wonderful price...but uuhh...its intended purpose are for navigation devices, although it may have no problem holding, I don't think it would allow all of the g1 usage in dock such as rotating landscape/portrait, opening/closing keyboard, charging with dual 3.5 headset jack/usb extention.
Are there any good carmounts that fit a g1 with the extended battery back cover?
hello,
just need some opinions about car holders. first one CU S240 holder for topaz
http://www.handy-heaven.de/shop/images/b178412.jpg and second one is universal htc holder CU G100 http://www.1a-handyshop.de/images/artikel/HTC-CU-G100.jpg
which one prefer you guys? im still hesitating.
I wouldn't go for either. Brodit are the best. There is no fiddling with plugs with that, you just slide it in and it is charging....
Alternatively see here: http://forum.xda-developers.com/showthread.php?t=564493
i bought one like the one in first link with charger for about 10$ on ebay,
the handle (long part) broke immediately, so luckily the plastic that holds the phone itself is disconnectable and fits HR and i had HR handle from my old phone so the combination works but for itself its piece of crap.
too bad HR dont make holder for topaz - simple & rock solid - mine works for 2 years now with several phones.
about the universal ones i tried couple and its never perfect...
Look at brodit. Costly but the best available. The one for Diamond can be sued for Diamond 2
I just purchased this (spendy $59) one from ProClip...
http://www.proclipusa.com/brodit-device-holder/htc-touch-diamond-2-(gsm)/charging-holder-with-tilt-swivel-and-cigarette-lighter-adapter-512011-17511.aspx
It's on backorder now, but should be here within a week. I'll let you know how I like it.
[edit: It's by Brodit... didn't realize that.]
I was thinking of going for the CS240 as well, some site have it around £20
http://www.mobilefun.co.uk/htc-touch-diamond2-car-upgrade-kit-cu-s240-p18997.htm
Most HTC originals I have bought are great quality.
That said I also spotted these Herbert Richter, any tried them ?
http://www.handtec.co.uk/product.php/2417/herbert-richter-htc-touch-diamond-2-jacket-grip
I like the idea of multiple attachements, for the bike, car, etc...
Anyone bought and tried either of these, the Brodkit ones looks too bulky and over priced (to me).
The CS240 is great quality. It is actually made by Herbert Richter in Germany and the jacket grip of the second link you supplied is part of the CS240 set. So I think the set is the best bargain. It has a very good build quality. Nothing waggles during driving.
There is one drawback. The jacket grip may scratch the shiny surface of the battery cover, but if the TD2 is used without a case its probably scratched anyway.
I bought something that looks like your second link. And let me tell you, that was the cheapest piece of Chinese crap I have ever bought. The sides the open and close to grip the phone were getting jammed, the became loose and phone would fall. In two month it had been broken.
Nomas mis dos centabos.
I just bought this one
link not allowed
waiting for it to arrive ......
as new user not allowed yet to provide links
try the web for dealextreme dot com and look for sku 23237
Have you thought about the parrot branded car kits.
The blue tooth works really well and I have had for a long time and it never let me down.
I got mine from cleverkit.com