Related
Hey guys:
Quick question. I've got a bunch of apps registered on my phone. Every time I flash a new ROM I need to reenter all of those serial numbers. I was looking at the UC customization threads to see if maybe I could just create a provisioning XML to create the appropriate registry entries automatically. Problem is don't think all the apps store their registration information in the registry.
So a couple questions:
1. I've found a good way to see registry changes (and thus figure out which keys I need to update), but I can't find the equivalent for the file system. Is there a tool that can take a snapshot of the file system on the phone, and then show diffs of the current file system with that snapshot? (That way I could figure out the additional files I'd need to copy over to make apps think they're registered.)
2. Is there another mechanism, other than registry and file system, that apps use to set themselves as registered? I couldn't think of anything... but then I'm hardly a hacker. (Even though... and correct me if I'm wrong... this is not technically hacking -- the serials are valid, I just don't want to reenter 10 of them every time I flash)
3. (And this probably belongs more in the UC thread): for some reason my provisionining file has no effect whatsoever. I've verified syntactical correctness of the file, and that cabarc can successfully create a CAB out of it. I've verified that the file is "installed" during the customization step. Yet, after a reset I see none of the changes specified in the provisionining xml. Any idea how I can debug this? Is there a log file that the config program leaves somewhere?
Thanks!
Hi, is there any way to backup the email settings so that they can be restored after doing a ROM update?
I've found several backup programs, but all warn they will not restore to a different ROM version. Its such a pain manually adding all my email accounts back in, and I want to play around with a few different custom ROMs, and don't want to have to re-enter these every time.
No need to restore emails themselves or other files/settings.
You can use UC to install a provxml file with all your email account settings.
gc14 said:
You can use UC to install a provxml file with all your email account settings.
Click to expand...
Click to collapse
Ok, I'm slow. What is UC and where do I find the appropriate provxml file to copy?
UC stands for User Customization and is included in the latest custom roms.
http://forum.xda-developers.com/showthread.php?t=366337
Information regarding EMAIL2 provxml creation is towards the bottom of post #3, though I highly recommend reading the entire thing (Posts 1-3), along with all the other information provided.
I've been urging people in this forum to educate themselves with UC for a while now, as not many use it.
Some swear by using OEM's. I prefer UC over OEM's for many reasons. UC allows you to cook a nice clean, bloat free ROM, and still have all your apps and settings installed automatically at first boot. You cannot uninstall the apps cooked in from OEM's as they are part of the ROM itself. It allows you the freedom to install/uninstall at any time, as well as pinpoint problems with certain apps. Lastly, apps installed by using OEM's tend to flood the \Windows directory.
Spb backup 2 u can restore to different ROM version.
Thanks gc14, that sounds good. Any way to do something similar if I load up the new 6.1 official ROM when it comes out?
Dont think official rom will be UC capable!
Thanks gc14, that sounds good. Any way to do something similar if I load up the new 6.1 official ROM when it comes out?
Click to expand...
Click to collapse
Official roms aren't UC compatible...but trust me...don't use an official rom. Custom roms are always better and are derived from the crappy official roms anyway.
on a second note, would backing up email settings into a cab a possibility? J/W of course.
So Spb backup 2 is the only way? Nothing freeware?
So Spb backup 2 is the only way? Nothing freeware?
Click to expand...
Click to collapse
I'm telling you man...just open notepad and type
Code:
LOCK:Enabled
XML: \Storage Card\email.xml
LOCK:Disabled
RST: Reset
Save it as SDConfig.txt and throw it on the root of your microsd card.
Then whip open notepad again and type
Code:
<wap-provisioningdoc>
<characteristic type="EMAIL2">
<characteristic type="{4185342d-4d70-4488-9217-fa2d1f8fb52f}">
<parm name="SERVICENAME" value="Comcast" />
<parm name="SERVICETYPE" value="POP3" />
<parm name="INSERVER" value="mail.comcast.net" />
<parm name="OUTSERVER" value="smtp.comcast.net" />
<parm name="NAME" value="Your Name" />
<parm name="AUTHNAME" value="Your User Name" />
<parm name="AUTHSECRET" value="Your Password" />
<parm name="DOMAIN" value="" />
<parm name="REPLYADDR" value="Your E-Mail Address" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
Fill in your own values, that one is for Comcast mail. If you want to setup another account, just copy the whole block starting with <characteristic type="EMAIL2"> down to the last </characteristic> and paste it below the last </characteristic>. Then just edit accordingly.
You have to use seperate GUID's for each account though, you can generate random GUID's here http://www.guidgen.com
Save it as email.xml (don't save as a .txt file), and copy to the root of your microsd card. You're done.
For extra settings, like file sizes to download, how often to check, read that UC thread, but these are the basics.
I'm sorry. I thought people said UC only works on the custom ROMs, and not on the official 6.1 that's coming out for when I decide to try it.
I still don't understand why you insist on using the Official rom when it comes out...
Not only will it be full of bloat and your Titan will feel like a PC running Windows ME, but also, you'll be missing out on all the great features a custom rom has to offer....UC being one of them.
Custom roms take the best out of the Official roms, and make them even better. I don't know why anyone would want to go back to a stock rom...unless they had to return it lol.
if you are cooking your own, use Oemizer. That will let you put all user settings in one oem. That includes Theme, email settins including passwords, ring tones etc.
shawndoc said:
I'm sorry. I thought people said UC only works on the custom ROMs, and not on the official 6.1 that's coming out for when I decide to try it.
Click to expand...
Click to collapse
why bother? it will likely have an older build of 6.1 than we already have in the custom roms
I know this is an old topic, though my question relates to the one asked here. I also wish to back-up my e-mail settings so I can add them to UC.
Now I wonder where I can find my current settings on my phone. I'm not 100% sure what settings are required/used and I wouldn't like to make mistakes here, as testing isn't quite easy. Can anyone answer that question?
Angelusz said:
I know this is an old topic, though my question relates to the one asked here. I also wish to back-up my e-mail settings so I can add them to UC.
Now I wonder where I can find my current settings on my phone. I'm not 100% sure what settings are required/used and I wouldn't like to make mistakes here, as testing isn't quite easy. Can anyone answer that question?
Click to expand...
Click to collapse
If you setup the accounts in the first place it will be faster to just retype in the xml then try and export. If you follow the libk on file operations from the uc thread, you will end up on msdn and there is a link to the EMAIL2 docs for a full description.
Also the instructions for debugging uc in the uc thread tell you how to make a cab from you settings.
piwaf said:
If you setup the accounts in the first place it will be faster to just retype in the xml then try and export. If you follow the libk on file operations from the uc thread, you will end up on msdn and there is a link to the EMAIL2 docs for a full description.
Also the instructions for debugging uc in the uc thread tell you how to make a cab from you settings.
Click to expand...
Click to collapse
Thanks for your reply, but it doesn't exactly cover my question. I have already found out how to create the xml and how to use it - that's not my problem. I can not, however, find my current settings - how to write them into the xml. My hotmail account for instance, is set up through windows live. I want to install that through UC as well. I'm sure it can be set up through an xml and/or reg settings, but first I need to find them as they are currently on my phone in order to recreate them.
Gotcha, I assumed you where just looking for a shortcut. I searched my registry and can't find my own settings, so must be somewhere special. I'll poke around and see but not sure what I'll find.
piwaf said:
Gotcha, I assumed you where just looking for a shortcut. I searched my registry and can't find my own settings, so must be somewhere special. I'll poke around and see but not sure what I'll find.
Click to expand...
Click to collapse
Yeah, I think they hid it somewhere in a file, instead of the registry. I've been poking around it for a while now and found nothing. I guess I'll have to do the windows live part manually, and hope that I entered the correct settings for my other e-mail accounts. (as I can't find those either)
Hi,
I own a toshiba ac100-10d which is the model with only wifi (no 3g) and android 2.1, which unfortunately comes with no android market preinstalled. I tried to install one using one of the many packages which you can found online. The problem comes, when I try to login in my gmail account. It says "can't extablish a reliable data connection" and it doesn't login into the account. If I try to login via youtube it creates the account but it doesn't sync it. I have moderate experience with android so you can easily tell me what I have to do. Do you think it would be possible to install the market on this ac100?
Thanks to anyone who will help me!
pipposanta said:
Hi,
I own a toshiba ac100-10d which is the model with only wifi (no 3g) and android 2.1, which unfortunately comes with no android market preinstalled. I tried to install one using one of the many packages which you can found online. The problem comes, when I try to login in my gmail account. It says "can't extablish a reliable data connection" and it doesn't login into the account. If I try to login via youtube it creates the account but it doesn't sync it. I have moderate experience with android so you can easily tell me what I have to do. Do you think it would be possible to install the market on this ac100?
Thanks to anyone who will help me!
Click to expand...
Click to collapse
It would be possible if I can get him into recovery menu. Just working on it as if it could still do that I have uploaded some files to the inside. Root can be done by z4Root 1.3.0.apk. Can be downloaded here http://forum.xda-developers.com/showthread.php?t=834428
I've made some headway
I have installed some files from cyanogenmods tegra compiled gapps + a newer vending.apk(Market) and a diffrent Google Talk app.
I had the same problem you have, but this suddently resolved itself for reasons unknown
Gmail Works and syncs
Google Maps works
Market starts and is stable without forced close, but I can't download apps, and I get Google Talk Authentication errors wich I belive are related to the market issue (the error also appears without the talk.apk installed)
I've got a new talk.apk from a samsung galaxy s, but it will not complete the sign in process
I feel I am really close to cracking this one, but I'm really stuck.
If anyone is interested, I can post which apk files I've installed in the /system/app folder.
Oh, I forgot to say:
I've got the same 10d version without 3g, but mine runs the updated Android 2.2
So it appears that sometimes market init it works, sometimes not ... Strange
I played and did many factory resets to find the right way and now it works (triple checked!)
I have a ac100-114 (French, no 3g), with android 2.2 and rooted with z4root.
(For anyone playing with adb : before doing anything, make backups with the tegra tools, and be careful with this powerful tool!)
I also used a package from cyanogenmod : the gApps from tegra. (http://wiki.cyanogenmod.com/index.php?title=Gapps#Google_Apps)
I looked into gAppsInstaller (here:
http://code.google.com/p/archos-apps-installer/downloads/list and here : http://forum.xda-developers.com/showthread.php?t=867303) to find what are the mandatory apps to install from the gApps cm package:
Into /system/app/
GenieWidget
GoogleBackupTransport
GoogleCalendarSyncAdapter
GoogleContactsSyncAdapter
GoogleFeedback
GoogleServicesFramework
MarketUpdater
MediaUploader
NetworkLocation
Talk
Vending
Youtube *
Into /system/framework/
com.google.android.maps.jar
Into /system/lib/
libspeech.so
libvoicesearch.so
Into /system/etc/permissions/
features.xml
com.google.android.maps.xml
* I had to replace Youtube.apk (in attachment) : I don't know why, but the one from cm is not working and prevent, even without launching it, the login into the market. I retrieved it from my hd2 running android ;-)
Installing maps in /system/app prevents Market initialization.
Then I did a factory reset, followed by the Toshiba first init and wifi configuration.
Now start the Market : nothing else or you might have to factory reset to start over!
Enter a random username (very important!), a random password and click next.
The market should start checking and then tell you the login is wrong : good, it connected !
Now click back, then enter your google account and click next : the Market should accept it and show the license page.
Accept it, the market should appear a few seconds before foreclosing. Launch it again, it will forceclose again.
The third launch should be the right one !
You will get forcecloses right after each app installation, but nothing to worry about : the app stays and appears in the download section of the market
Gmail can be installed from the market.
Your contacts should be synchronized, Talk and Youtube should work.
Problems:
For maps you will have to get the apk somewhere else.
The calendar is missing.
@tharf
Your method works perfectly .. Thx for that. Only problem is that the service framework starts some kind of messaging service and that wakes the ac100 from standby every couple minutes.... I tried fixing that but couldn´t do it... ;0(
So this fix is kind auseless for me...
But keep up the good work... ;0)
FC reason is a
Code:
E/DatabaseUtils( 1547): java.lang.SecurityException: Permission Denial: writing com.google.android.gsf.settings.GoogleSettingsProvider uri content://com.google.settings/partner from pid=10019, uid=10069 requires com.google.android.providers.settings.permission.WRITE_GSETTINGS
for com.android.vending.
Does anyone has an idea how to fix android permissions, as it recreates /data/system/packages.xml if i change it?
Thanks for pointing out where is the FC cause !
I did some more tests, and it seems that if the packages.xml gets modified, followed by sync (just in case, I don't know anything about caching on the ac100), and then a kill -9 -1 is executed, the added permission stays, even if the packages.xml gets scrambled after reboot
For me it works : no more FCs
I found another thing : in order to see apps in the market that asks for the gps (maps, catch notes ...), just had this line to /system/etc/permissions/android.hardware.location.xml, in the <permissions> tag :
<feature name="android.hardware.location.gps" />
(Make a backup of the file first )
So the bottom part of the file should look like :
<permissions>
<feature name="android.hardware.location" />
<feature name="android.hardware.location.network" />
<feature name="android.hardware.location.gps" />
</permissions>
But in order to get it working, you will need to login to the market for the first time, so a factory reset is required
hey, sorry for the dumb question..
i´ve downloade z4root and clicked on temporarly root...after a few
secs the progress ran through and the ac100 rebooted.
now i tried to install the gAppsInstaller v5 for arcors but got the error message, that no files were copied.
how did you do this?
can you please poste a howto for dummies q.q?
you wrote"
Then I did a factory reset, followed by the Toshiba first init and wifi configuration.
Now start the Market : nothing else or you might have to factory reset to start over!"
didnt you install the googlemarket after the reset, did it remain :O?
thanks
Hi,
Good job at first for trying this amazing way to install gapps into Ac100.
In my experience, that method worked well, but it seems, after pushing the mandatory apk files to the system partition, and factory resetting, in the Toshiba device initiation settings, turning on wifi will keep the Google account settings connection from working.
I've been trying many times, only turning on wifi when google login process begins will work.
No idea why that happens.
Regards.
hey gus,
i´ve come this far
ehhm..the files you mentionend.. i have copied them into the right folders, but the won´t get installed, i get parsing errors..
can someone please upload the working files?
working apps:
maps.apk
youtube.apk
..
market on toshiba AC100
Hi Guys
I can confirm that google market is possible on AC100. Also Gmail, Talk and Maps is working fine :
Can anyone please post a guide to get gApps working? (Gmail / Vending) Maps works standalone, but as far as i can see, the others need something!
Like a user above, i can't root my ac-100, it freezes and restart. If it's not rooted, i can't access the folders tharf was talking about in a previous post.
Thanks
Ok, i've managed to solve somethings (hopefully everything)
Unfortunately to root my AC100, i used ADB (I installed SuperOneClick in a previous try, don't know if it helped or not).
ADB is a tool developed inside Android project, that allows developers to test their apps directly on their phones, rather than an emulator. There are plenty of tutorial to get it started, just google it! It's not easy at first, but was the only thing allowed me to copy the files.
For those familiar with this development tool, just plug the device (ac100) in and execute
"adb remount"
in a "cmd" shell (i worked under windows). it magically remounts your system partition in RW, instead of default RO. This way you can "adb push" the files tharf listed in his first post!
Next, follow his indications:
-factory reset (HOME button+POWER button), follow the system reset, press 1 to continue, wait a few minutes and it will reboot on his own, give it time.
-configure ac100, like the first time
-connect it to wifi
-open Market App (you'll find it on the Toshiba Home menu, in the end)
-connect with random user, let it fail the authentication, the use a real one, and you're good to go!
I installed a few apps, so far so good. Only thing to keep in mind: Market launches an error after installing an app. No worries, it's fine: just press OK and go on.
I was interested in Gmail app, so i "adb push"ed it from the beginning, and it worked at first try. Same for Talk, Contacts, Youtube and Maps (find the apk, it's not hard )
Thanks to all, hope this could help.
Toshiba AC100
I've afforded this laptop two days and so far where i updated and hadded
the portuguese language, but when i when in settings->language it simples does not exist.
I dont have anything against english, but i need at least the ortography.
I could use spannish but i rather have english
Every time I run market/gtalk,I get this Message:
"Can't establish a reliable data connection to the server. If it continues, call Customer Care."
Thnx a lot - got Market, Gmail, Maps, ... working too. Have only tested it for some minutes - but hope it will work forever
Very good especially as the Toshiba AC100 10V with UMTS is now really cheap here.
Still have the Market problem with crash after install/deinstall of an app.
Anyone tried the newer GoogleApps for Tegra from here? http://forum.xda-developers.com/showthread.php?t=912633
I tried to get rid of the market crash. So I did the following:
adb shell connect to /data/system after root
chmod 777 packages.xml
sync
kill -9 -1
But that didn't work I still get the crashes. Can you help me with more details what you mean with 'the added permission stays'?
Thanx in advance.
Firmware from the Russian community users of the AC100 Toshiba (android 2.2) All Google applications work fine(Market+Gmail+Tack)!
Different from the standard:
1. Root
2. Busybox 1.19
3. Google Apps, including the latest market (by 116(Toshiba AC 100-116- russian 3G+Wi-Fi+32Gb model) runs without any problems), SetupWizard works too
4. Jorte - perfect replacement calendar from Google, beautiful, seeing all the calendars
5. Ad Blocking
6. Titanium Backup
7. Terminal Emulator
8. New splash screen
9. Spare Parts
10. Easy selection of widgets
Installation in Windows:
1. Download the firmware
2. Unpack
3. Translating the device in boot mode (turn off, esc + control + power)
4. Install the driver from the archive
5. Run bat file from the archive (ac100flash.cmd)
6. We are waiting for the end of the loading and turning off the device while holding the button 10 seconds
7. Turn device, answer all the questions for 116 checking in via 3G.
8. Enjoy.
Torrent: ****://rutracker.org/forum/viewtopic.php?t=3498125
Firmware+drivers ****://narod.ru/disk/8503508001/ac100_flash.rar.html
Firmware(update) ****://narod.ru/disk/8819504001/ac100flash_v2.rar.html
Спасибо форуму ****://4pda.ru/forum/index.php?showtopic=226289&st=40#entry7000473
[Edit] Discontinued indefinitely. App creation was a little out of my league when I began trying to make it. Then Snapchat started encrypting files in more complicated ways than I had experience with, so I couldn't keep up and unfortunately had to drop all efforts. This project will no longer work and no further effort has been made to continue progress. I apologize for the lack of communication.
There are other resources out there that are still working, however. If you need help finding such things, you're welcome to PM me to ask what I'm referring to.
Discontinued until further notice. Currently working on an app that does all of this and more. For those who previously downloaded this and find it suits their needs for the most part, enjoy it, and consider checking out the app in the future. To others, I will let you know when I release the app. It should be much improved from the current project (and it doesn't require Tasker).
Due to a request to release my tasker project, which silently, neatly, and automatically copies and renames the snapchats you receive to a separate folder, I created this thread. Please try the latest version before asking for help with an issue. Most issues have probably been solved at this point.
There are still bound to be a few kinks in this, but I have spent lots of time getting it to work as much as possible (I am rather proud of the regular expressions that I created myself, even if they might be overkill).
Attached is the project if you just want to import it and let it go to work. Just extract from the zip and import in tasker by clicking a Project at the bottom of the Profiles tab (not the + sign, but an icon to the left of it)
To describe it simply: upon receiving a notification from snapchat and noticing a file change in the directory where the files are stored, it runs a series of commands that copies and saves them to the SDcard/Snapchat/Saves(/Vids) with filenames of "[DATE] - [TIMEMS] [NAME OF SENDER].jpg" (or .mp4). TIMEMS is the time in milliseconds from some time in January 1970. It keeps the task from overwriting your saves and it orders them nicely.
If I end up making any drastic changes, I'll probably come back and include them here. If you take it and make any changes that simplifies the process or makes it work better, feel free to share.
Good luck!
The new version (5-8_v5) has been released (small update from v4)! PLEASE READ BEFORE USING:
Requires Tasker's Accessibility service to be running (Android Settings> Accessibility> Tasker) to catch the notifications—only if you want the usernames to be automatically parsed and used; if you don't turn it on, it'll give you a Variable Query every time it finds a file loaded. Also if you don't turn it on, run the Folder Fixes task on your own, cause it's supposed to run the first time you get a notification.
When this first runs, it assumes that you have the folder/directories created. I don't know when snapchat creates them (during install or after receiving the first snap), so if you get errors related to not finding the file then try re-running the Folder Fixes associated task.
If you see something asking for text with the title Username, that's the Variable Query I mentioned. That's asking for the person's name who sent it, if you know it. If you don't know it at the time of asking, you can put anything in there and it'll copy with that attached (you can always go to the folder and rename it yourself)—otherwise, you can close it (or wait 15 seconds) and rerun the task on your own time.
Besides that, don't touch anything and you should be fine!
Changelog (5-8_v5):
Small update to 5-6 which stops the task and, therefore, the %Last[whatever] variables from being created if the Username variable is unset when it gets to the part where it copies (equating to no copies being made, regardless).
Because of that, now you shouldn't have to delete variables manually.
An unmentioned change in 5-6 was that I changed the flash message. It now flashes the names of each file it creates. This can be turned off—Action 37 in the Copy/Rename tasks.
(v2) Figured out the other reason why duplicates were happening with images. It has now been updated. (The only way this could backfire [same for videos] is if you get two different snaps of the exact same filesize in the same time period—very unlikely)
(v2) Made the Variable Query nicer looking.
(v3) Fixed some variable references that were funky
(v4) Fixed the profiles getting turned off and staying off by accident under certain scenarios
(v5) Changed it so no user input is required to turn off the profiles. If the 4.2+ one runs at all, it stops and turns off the other one.
(v5) Changed the %Last[etc] variables from creating excessive arrays with the same numbers.
Changelog (5-6):
Revamped the way it checks for previously copied snaps. It should be foolproof now, giving no duplicates while still not missing any.
Added an Array Clear for the %Username variable at the end of the copy/rename tasks.
Added a Variable Query if it's going to copy something but %Username is not set (see above for usage)
You can delete the Variable Set %Notification from the Update Username task if you want. It's just there for me so I can check it as a global variable. It isn't referenced anywhere else in the project.
Changelog (5-4_v2):
TONS of error fixes caused by insufficient permissions and directories are now included in the run-once profile.
Added profile (and associated tasks) which should fix the problem that users were having about the video folder not existing
(v2) Optimized the way it turns off profiles. This should automate the above-listed stuff. So even if you have all the profiles on, it should turn off the ones that don't work (unless both of them work). Still, in case the run-once wasn't turning off when done, now it will.
(v2) I consider this the first fully stable release. However, you're welcome to note if it doesn't work for you.
Changelog (5-3):
The received_video_snaps folder will no longer be allowed to be deleted by Snapchat
No more error messages when saving video snaps
If the %Username(1) variable is unset, it will flash a Variable Query, which you should type the person's name in.
The only issue with this is for videos. You will just need to go back to the other screen and load the video again.
If/Then was deleted in the Username catching task to catch multiple usernames better.
Profiles should now only trigger once per file change. I would check from time to time to make sure they are still in the "on" position. It should be fine, but I won't assume anything.
Project icon changed to Snapchat icon
Changelog (4-29):
has been significantly enhanced from the original. It now does a much better job:
Preventing duplicates saves
Not running indefinitely
Running efficiently and quicker
Having less confusing global variables
Picking up the username (currently testing to see if this can be done even better, but I basically need to wait for a certain type of notification. It should be better regardless)
Edit, I think it's safe to delete the If and End If in the Update Username task, which might work for trying to pick up multiple usernames at the same time. This hasn't been extensively tested, but I'm pretty sure it's the correct decision
Automatically catching videos when they're loaded
I also fixed a few rather large errors that might have been in the previous release
Donations are accepted!
NEWEST Version is on the bottom (I'm not really sure why people are downloading the original version at this point... it's just there for reference. I may just remove that one if it tricks people that much...)
I should probably note that this does require root, because you have to change the permissions of the files for tasker to be able to read them.
Hello, is it possible to make one with this conditions with just a simple task...
Whenever I receive new snapchat notification, I then open tasker and just run that particular task.
What I want the task to do is just copy everything and remove the ".nomedia" extension from snapchat folder into a new folder in the memory card.
The reason I want this is that Snapchat isn't so popular in my country. Therefore, I only receive Snapchats once in a while and I only want to save the images sometimes. Not all the times. Moreover, i dont wanna keep tasker running in the background.
Thanks a lot!!
rfkw said:
Hello, is it possible to make one with this conditions with just a simple task...
Whenever I receive new snapchat notification, I then open tasker and just run that particular task.
What I want the task to do is just copy everything and remove the ".nomedia" extension from snapchat folder into a new folder in the memory card.
The reason I want this is that Snapchat isn't so popular in my country. Therefore, I only receive Snapchats once in a while and I only want to save the images sometimes. Not all the times. Moreover, i dont wanna keep tasker running in the background.
Thanks a lot!!
Click to expand...
Click to collapse
That should be rather simple. If you wanted to use my project, you would do that by deleting or turning off all the profiles in the project, and then you'd only need the tasks named Run & Rename Snapchat Image and Run & Rename Snapchat Video and get rid of some of the extra features that you don't need. For example, you could get rid of a bunch of the steps in the tasks.
[deleted]
This would technically work for both images and videos, but to get it to actually find the videos, you'd have to find a way to run the task while snapchat is loaded and the video says "Tap to View". I'd suggest setting up a gesture.
By the way, in the project I have, tasker only runs when each profile is active. That's why they're there, to prevent the battery drain that would otherwise occur. The profile states are rather infrequent (when you receive a snapchat notification, and when a file is changed in the directories listed), so I haven't really noticed battery drain from that.
You're also aware that you have to do this BEFORE you view the snapchat, right? Otherwise, you could just take a screenshot...
An alternative to the above method would be to use the Copy Dir command on those directories, or the FolderSync app, but you'd still need to change or add the correct file extension (jpg and mp4). Fiddle around with it; you might be able to figure out a way to add the extension.
Disregard below, I figured it out, it wasn't so clear about long pressing the icons at the bottom of the screen to get to the projects dialog. Done now! Thank you shenkenstein
I'm unable to import the prj file. I tried multiple things until I just changed it from snap.prj.xml to snap.prf.xml and the Tasker was able to see it in the import dialog. But once I select it I get:
Error: the import contains more than one profiles
I'm thinking there's something missing in my Tasker. I keep hearing references to 'projects' but no such tab exists in my UI. I've gone to preferences and unchecked 'beginner mode' with very little changes.
What am I missing?
shenkenstein said:
An alternative to the above method would be to use the Copy Dir command on those directories, or the FolderSync app, but you'd still need to change or add the correct file extension (jpg and mp4). Fiddle around with it; you might be able to figure out a way to add the extension.
Click to expand...
Click to collapse
I actually tried setting up a simple copy dir commad. Just copy dir from the receivedsnapchat folder to a random folder on my sdcard whenever I run Snapchat.
However, it doesnt seem to work. I guess it's something to do with the chmod thing which I'm not familiar with. Am I right?
Thanks for your help tho! I'll try out the steps you listed. Hopefully I can get it to work.
---------- Post added at 01:13 PM ---------- Previous post was at 12:18 PM ----------
shenkenstein said:
On second thought, what you want would just be easier to create a task with:
A1: List Files [ Dir:/data/data/com.snapchat.android/cache/received_image_snaps Match: Include Hidden Files: On Variable:%nomedia Continue Task After Error: On ]
A2: List Files [ Dir:/data/media/Android/data/com.snapchat.android/cache/received_video_snaps Match: Include Hidden Files: On Variable:%nomediavid Continue Task After Error: On ]
A3: Run Shell [ Command:chmod 777 %nomedia() Timeout (Seconds):0 Use Root: On Store Output In: Store Errors In: Store Result In: Continue Task After Error: On ]
A4: For [ Variable:%filestocopy Items:%nomedia() ] --- don't forget the () after nomedia
A5: Copy File [ From:%filestocopy To:Snapchat/Saves/%TIMEMS.jpg Use Root: Off Continue Task After Error: On] -- here's where I have an issue, because I'm pretty sure you need to tell it the original filename of the file, minus the nomedia part (the variables stored in %nomedia will be the entire filename, including directories). That's why I find it easier to create my own filename, so I'd use something like %TIMEMS as I have listed. You could also change the directory here. You COULD keep the old filename using tasker's variable search replace function with a regex to select everything but the nomedia part, but I think that's not worth the effort.
A6: End For
Click to expand...
Click to collapse
Alright managed to get it working. Currently for A5, I've set it to To:New Folder. This new folder is a folder on my sdcard.
The question I have is, if I'm using %TIMEMS.jpg, how would it rename the files? Would it be sequenced or will all the files have the same name?
Would it be 1TIMEMS.jpg, and next pic would be 2TIMEMS.jpg, 3TIMEMS.jpg and so on? Or would it be the original filename with TIMEMS at the back, ie. "adlfkadlfhadlfTIMEMS.jpg"?
Thanks!!
rfkw said:
Alright managed to get it working. Currently for A5, I've set it to To:New Folder. This new folder is a folder on my sdcard.
The question I have is, if I'm using %TIMEMS.jpg, how would it rename the files? Would it be sequenced or will all the files have the same name?
Would it be 1TIMEMS.jpg, and next pic would be 2TIMEMS.jpg, 3TIMEMS.jpg and so on? Or would it be the original filename with TIMEMS at the back, ie. "adlfkadlfhadlfTIMEMS.jpg"?
Thanks!!
Click to expand...
Click to collapse
You can see for yourself by doing a flash %TIMEMS. It always comes up with different numbers, such as 1367028766502 or 1367028766586. I don't think tasker is fast enough to do multiple commands in the same millisecond. Does that make sense?
And chmod is the shell command that gives the files permission to be read, write, and executed. You can read about it online if you really want, but if it's not working you either don't have root or didn't check use root. In fact, the Copy Dir alternative would probably require use root to be checked as well, but again, because we're wanting to change filenames, I don't think that's the command we want.
Bumping because of new version.
You can delete the old project and add this one if you have the older version. Deleting a project is done much the same way adding one is.
Vid done!
I installed and when I load a video, I get a message "Vid Done" When I exit Snapchat, I get a Tasker Error, List Files: file not found: /data/media/Android/com.snapchat.android/cache/Received video snaps. What am I doing wrong? I'm a noob, sorry if it's a dumb question.
Hi! I've imported it to Tasker, and everything seems fine there. However, it simply won't do anything and I've tried everything with my extremely limited knowledge.
I receive a Snap, but nothing shows up in /storage/sdcard0/Snapchat/Saves/(or Vids depending). Running Xperia P, with JB 4.1.2
I've checked that the images or videos do show up in the folders specified by the project, it just seems like it doesn't recognize I have gotten a snap?
Dahlmo said:
Hi! I've imported it to Tasker, and everything seems fine there. However, it simply won't do anything and I've tried everything with my extremely limited knowledge.
I receive a Snap, but nothing shows up in /storage/sdcard0/Snapchat/Saves/(or Vids depending). Running Xperia P, with JB 4.1.2
I've checked that the images or videos do show up in the folders specified by the project, it just seems like it doesn't recognize I have gotten a snap?
Click to expand...
Click to collapse
Do you have tasker enabled in accessibility settings? If not, then the profile won't get the username from the notification. If you don't want to enable it, you can add a Variable Query for Username(1) in the copying task. Then, that'll always ask you for that variable when it finds the file added. Just put whatever you want there (though it's designed for the person's name)
As my project is set up, the file won't copy if the username isn't set, and it won't set if tasker can't access the notifications.
I've just added:
If %Username(1) ! Set
Variable Query: Variable %Username(1)
End If
to my copy tasks right before the For, For, Run Shell, etc... commands. That should take care of that situation, if it's the problem, and if I release a new version it'll have it :good:
wdgewood said:
I installed and when I load a video, I get a message "Vid Done" When I exit Snapchat, I get a Tasker Error, List Files: file not found: /data/media/Android/com.snapchat.android/cache/Received video snaps. What am I doing wrong? I'm a noob, sorry if it's a dumb question.
Click to expand...
Click to collapse
No, it's not a dumb question. It's because the File Modified profile picks up when Snapchat deletes the file as well as when the file is copied by tasker (but the task that gets that error message is what allows it to not run every time this happens). It's not a significant error, UNLESS you aren't seeing it copy the files. You can turn those flash error messages off in Tasker Preferences>Action>Flash Problems.
Edit: I just fixed the error message from displaying even with the flash problems option checked. Go to the SnapVid File Added profile, click the File Modified part of it, and add /received_video_snaps/ after /cache/ so that it looks like "/data/media/Android/com.snapchat.android/cache/received_media_snaps/" without the quotes. I'm surprised I didn't notice that myself. Haha, thanks for pointing it out. That'll should also prevent the task from running while you're sending videos (because I saw a folder named sending_video_snaps there too before it deleted it again).
Edit 2: Nevermind, the error still came up, but it's only when snapchat deletes the folder. Also, my profile doesn't activate with that folder added, which is probably why I left it at /cache/. What's happening is the Video File Ready task is trying to List Files and it's not finding the folder in which it's supposed to search. I don't know any way around this because it keeps deleting the folder, even if you add it manually. --more on this below--
shenkenstein said:
Do you have tasker enabled in accessibility settings? If not, then the profile won't get the username from the notification. If you don't want to enable it, you can add a Variable Query for Username1 in the copying task. Then, that'll always ask you for that variable when it finds the file added. Just put whatever you want there (though it's designed for the person's name)
As my project is set up, the file won't copy if the username isn't set, and it won't set if tasker can't access the notifications.
Click to expand...
Click to collapse
After enabling it in the accessibility settings it still isn't working fully.
In Tasker, I imported the SNAP.prj.xml file, and the profiles "Snapchat Notification, Snap File Added and SnapVid File Added" are all set to on. Tasker says there are "no active profiles" but I assume that is due to the snap.prj.xml file being under the "two people" tab, and not the "house" tab.
I see that under vars on the home tab I have "%Username1 someoneIrecievedfrom" so something must be work. Just not getting any files I assume. Again, this (adding variables and such) is out of my league, so I apologize for seeming a bit technically impaired.
Dahlmo said:
After enabling it in the accessibility settings it still isn't working.
In Tasker, I imported the SNAP.prj.xml file, and the profiles "Snapchat Notification, Snap File Added and SnapVid File Added" are all set to on. Tasker says there are "no active profiles" but I assume that is due to the snap.prj.xml file being under the "two people" tab, and not the "house" tab.
I see that under vars on the home tab I have "%Username1 someoneIrecievedfrom" so something must be work. Just not getting any files I assume.
Click to expand...
Click to collapse
If you run the Run & Rename Snapchat Image task by itself, does it work then?
Hmm. Don't worry about the username variable, then. The "no active profiles" is fine, because these profiles are set to be active only for the event itself (which is like a split second long). The only other thing I can think of, without seeing your run log, is if you don't have root or haven't given Tasker root access. So, also try turning on the Run Log and noting where you get an error.
Breakthrough!
I just had a major breakthrough with the videos folder deletion problem (which ends up creating errors and stuff). [deleted]
That literally disables Snapchat's ability to delete folders in the cache folder, but it allows it to create new folders and files within the new folders. Theoretically, you could also do this same function to the received_video_snaps folder, and it would never be able to delete the files within the folder. Unfortunately, if you did that then every time you hit "load" in snapchat, it would load a new file into the folder, so you'd probably get multiples. But that could be done to the images folder without any issues, I think.
[deleted]
Dahlmo said:
After enabling it in the accessibility settings it still isn't working fully.
In Tasker, I imported the SNAP.prj.xml file, and the profiles "Snapchat Notification, Snap File Added and SnapVid File Added" are all set to on. Tasker says there are "no active profiles" but I assume that is due to the snap.prj.xml file being under the "two people" tab, and not the "house" tab.
I see that under vars on the home tab I have "%Username1 someoneIrecievedfrom" so something must be work. Just not getting any files I assume. Again, this (adding variables and such) is out of my league, so I apologize for seeming a bit technically impaired.
Click to expand...
Click to collapse
I'm having this issue too. I have a rooted Galaxy Nexus and have enabled Tasker in Accessibility settings. I've attempted to run the ''Run and Rename Snapchat Image' when I had a pending one and it did not work. I could, however, see the file in the directory (/data/data/com.snapchat.android/cache/received_image_snaps) when I checked it out via Root Explorer. I also could see my contact's name in the %Username value.
My Run Log from when I manually run that task with an active Snapchat is attached with the 5-3 profile.
a10waveracer said:
I'm having this issue too. I have a rooted Galaxy Nexus and have enabled Tasker in Accessibility settings. I've attempted to run the ''Run and Rename Snapchat Image' when I had a pending one and it did not work. I could, however, see the file in the directory (/data/data/com.snapchat.android/cache/received_image_snaps) when I checked it out via Root Explorer. I also could see my contact's name in the %Username value.
My Run Log from when I manually run that task with an active Snapchat is attached with the 5-3 profile.
Click to expand...
Click to collapse
Thanks for the Run Log.
Well, your answer is that the List Files command (label List nomedia) is failing to find the files in the folder. I can think of only two possible reasons for this (and I think it's #1):
1. Check the permissions of the folder /received_image_snaps/ and tell me if it's missing read permissions for group or other (I think Tasker falls under Other, but I forget). If it is, try manually adding those permissions (check the boxes); you might want to add permissions to execute as well, just in case. I can set up another command in the run-once profile to solve this for everyone if it fixes it for you, so let me know.
2. In the List nomedia command, I have it set up to match any files in there which have a character or more followed by .nomedia (this is under Match, listed as "+.nomedia"). If the files you see in that folder don't match this regex, it won't list them. You can safely delete this entirely without any negative side-effects. Nothing gets put in that folder that doesn't match that regex, anyway, for me.
shenkenstein said:
Thanks for the Run Log.
Well, your answer is that the List Files command (label List nomedia) is failing to find the files in the folder. I can think of only two possible reasons for this (and I think it's #1):
1. Check the permissions of the folder /received_image_snaps/ and tell me if it's missing read permissions for group or other (I think Tasker falls under Other, but I forget). If it is, try manually adding those permissions (check the boxes); you might want to add permissions to execute as well, just in case. I can set up another command in the run-once profile to solve this for everyone if it fixes it for you, so let me know.
2. In the List nomedia command, I have it set up to match any files in there which have a character or more followed by .nomedia (this is under Match, listed as "+.nomedia"). If the files you see in that folder don't match this regex, it won't list them. You can safely delete this entirely without any negative side-effects. Nothing gets put in that folder that doesn't match that regex, anyway, for me.
Click to expand...
Click to collapse
Yeah, the permissions were not set to allow it reading. Now it gets to the end before it fails. I've uploaded the run log as well as a screenshot of the error it pops out. It's worth noting that the file it "can't find" both exists and has 777 permissions set.
a10waveracer said:
Yeah, the permissions were not set to allow it reading. Now it gets to the end before it fails. I've uploaded the run log as well as a screenshot of the error it pops out. It's worth noting that the file it "can't find" both exists and has 777 permissions set.
Click to expand...
Click to collapse
Strange. I normally only see the copy file error if the file itself doesn't have permissions (which would be the result of the previous command not working) or if the %Username1 variable doesn't exist, but you noted clearly that it did work, and the variable should still be there from when it found it earlier.
And I think I just duplicated this error. It's so mundane that this is the case, but it's quite a big issue, so I'll have to update the version in a bit. Try adding a Saves folder in your Snapchat folder in your sd card. I was about to doubt this would be the case until I tried a different folder in my task.
Though, I'm confused why your screen still showed that error. Something's still awry I think...
Skip to How to Import Chat History below to skip the background reading.
Yes, there is a graphical import method for Line!
If you use Line, and you want to change between devices, it seems as though it is nearly impossible to backup (export) and restore (import) your Line chat history. I have searched XDA, Google, AndroidForums, Line's (useless) online help, etc. No help, no info. There are some guides about how to use a SQL editor to fool the app, etc., but that was just way too much effort for me, so I finally gave up and just switched. BUT, before I did, I went ahead and exported all my chats, even knowing there was no way to import them, just in case. Well, that just paid off.
There is absolutely no method available within Line to restore your chat history, right?! WHY is there a backup option? There MUST be a way! Seemingly no.
I just figured it out. And when I explain it, you too will wonder, why in the !#$%@^[email protected]%!#@$!#[email protected]^*%^&(*%^@# has Naver not published this?????
I was on my way to back everything up in preparation for a new ROM and figured I'd do a complete and total system wipe, meaning, I went to take a look at my internal storage (SDcard, Emulated, 0, whatever you refer to it as), to ensure that I got all the little things I want, like Viber pictures, WhatsApp pics, etc. And there I saw it. The folder. And, like you are now thinking, I thought, just maybe...
How to Import Chat History (Abbreviated, Quick and Easy)
Copy your chatHistory.zip file to internal storage sdcard/LINE_Backup
Start Line, open an existing chat or start a new chat with the person whose chat history you want to restore
Tap the drop-down arrow in the upper right, Chat Settings, and look what just showed up below the (formerly) useless Backup Chat History option
How to Backup and Restore Chat History (Additional Details)
Line offers a "Backup Chat History" option, but keep in mind, this is conversation / per-person specific. That means, you need to do it for each individual person.
For my own ease of use, and to make transferring things easy, now that I know what the process is, here's what I did.
Backing Up
Go into the conversation you want to backup.
Tap the drop-down arrow in the upper right, and select Chat Settings.
Select Backup Chat History, Backup All
Say Yes to e-mail this chat - in a previous version, I had to enter the conversation person's name in the subject, the new Line now does this for me.
Repeat this process for every conversation you want to migrate to a new device.
Restoring
On your new device, save the attachments from each e-mail into the /InternalSDCard/LINE_Backup/ directory.
Start Line, go to Chats, Tap the Chat Bubble in the upper right to start a new conversation, select the person you want to restore
Your chat window will be empty, but from here, you just follow the instructions above, basically, drop-down arrow, Chat Settings, Import Chat History
And that's it.
I REALLY hope this helps some people out. I wasted a LOT of time trying to figure this out, and as usual, once you know the solution, it's pretty simple and seems so obvious.
If I helped, throw me some Thanks button so I know I wasn't the only one!
I have a google Nexus 5, which doesn't have any internal storage.
Are you able to specify where this should be copied too as I cannot seem to find the right holder.
Also, what am i copying in there? The actual zip file or an extract of the zip file?one
kkwhong said:
I have a google Nexus 5, which doesn't have any internal storage.
Are you able to specify where this should be copied too as I cannot seem to find the right holder.
Also, what am i copying in there? The actual zip file or an extract of the zip file?one
Click to expand...
Click to collapse
On your internal storage of your Nexus 5, create a folder called: LINE_Backup the exact upper/lower case and _ matter. Put the LINE backup zips in that folder, do not extract them. LINE knows which zip goes with which user, you just have to start the chat and import per the instructions above.
BillBauman said:
How to Backup and Restore Chat History (Additional Details)
Line offers a "Backup Chat History" option, but keep in mind, this is conversation / per-person specific. That means, you need to do it for each individual person.
For my own ease of use, and to make transferring things easy, now that I know what the process is, here's what I did.
Backing Up
Go into the conversation you want to backup.
Tap the drop-down arrow in the upper right, and select Chat Settings.
Select Backup Chat History, Backup All
Click to expand...
Click to collapse
Unfortunately, The "Backup All" setting only applies to one-on-one conversations. Group chats only give you the Backup as Text option.
raveur said:
Unfortunately, The "Backup All" setting only applies to one-on-one conversations. Group chats only give you the Backup as Text option.
Click to expand...
Click to collapse
That sucks. I haven't tried a group chat in LINE before. Did you try a backup/import to see if it would work? I'm sort of assuming no, that it doesn't work, based on your post. :/
Thanks!
A huge THANKS for this, saved me alot of trouble.
Still, anyone figured out how to import group chats? Maybe from the text file?
daer2dai said:
A huge THANKS for this, saved me alot of trouble.
Still, anyone figured out how to import group chats? Maybe from the text file?
Click to expand...
Click to collapse
A big you're welcome.
I don't have enough LINE friends to actually have a group chat and try to figure it out.
I just found a method for importing the chat history using Titanium Backup and the terminal. You need root for this. Recently Line made some changes that made this more
Hope you find this useful.
1. Restore Line with Titanium Backup (app+data) (DON'T OPEN THE LINE APP YET!)
2. Log into a root shell and delete the previous settings:
sqlite3 /data/data/jp.naver.line.android/databases/naver_line
delete from setting;
.quit
3. Now we have to delete this xml only if you are using a recent version. In previous ones it didn't even exist as far as I know
rm /data/data/jp.naver.line.android/jp.naver.line.android.settings.xml
4. Open the Line app and it will ask you to enter your user and password.
You will receive a warning about losing your chat history. Just ignore it and...
5. Enjoy!
I had copy the zip files to the Line_backup folder which was already in the phone internal memory. However, there is no Import Chat History Button.
The Line version was the latest one and had Force Stop and restarted Line. Still to no avail.
Is there any way to view the chat log?
What format is it saved in and how would you go about viewing the chat log if you were sent one from a chat that wasn't yours?
Didn't Work on LG Android Optimus
I must be doing something wrong, but it seems I've followed all the steps. The LINE_backup files are in my SD card, but when I click Import Chat History>yes>ok, nothing happens... :/
I made an account just to post on here and hopefully find out.
daimyorl said:
I just found a method for importing the chat history using Titanium Backup and the terminal. You need root for this. Recently Line made some changes that made this more
Hope you find this useful.
1. Restore Line with Titanium Backup (app+data) (DON'T OPEN THE LINE APP YET!)
2. Log into a root shell and delete the previous settings:
sqlite3 /data/data/jp.naver.line.android/databases/naver_line
delete from setting;
.quit
3. Now we have to delete this xml only if you are using a recent version. In previous ones it didn't even exist as far as I know
rm /data/data/jp.naver.line.android/jp.naver.line.android.settings.xml
4. Open the Line app and it will ask you to enter your user and password.
5. Enjoy!
Click to expand...
Click to collapse
I used this method and bang! It works like a charm!
Thanks a lot
*It actually still gives warning after I logged in - that my chat history will be deleted or such -, but actually it didn't delete a thing. So, to anyone who wanna try this, don't worry with the warning message!*
james.abcde said:
I used this method and bang! It works like a charm!
Thanks a lot
*It actually still gives warning after I logged in - that my chat history will be deleted or such -, but actually it didn't delete a thing. So, to anyone who wanna try this, don't worry with the warning message!*
Click to expand...
Click to collapse
Glad it was useful for you!
Thanks for the feedback. I will add the info about the warning as I forgot it completely.
Hello,
daimyorl said:
sqlite3 /data/data/jp.naver.line.android/databases/naver_line
Click to expand...
Click to collapse
This gives me this error:
Error: unable to open database "data/data/jp.naver.line.android/databases/naver_line": unable to open database file
I use the emulator in ROM Toolbox Lite
daimyorl said:
delete from setting;
Click to expand...
Click to collapse
If I use SQLite Debugger to delete the setting table, and I also remove the jp.naver.line.android.settings.xml file with ES Explorer, I get the Force Close when I try to open the application.
And If I delete the whole naver_line database, then Line starts, but losing the chat history.
norike said:
This gives me this error:
Error: unable to open database "data/data/jp.naver.line.android/databases/naver_line": unable to open database file
I use the emulator in ROM Toolbox Lite
Click to expand...
Click to collapse
Got it! I was missing the su command to make the emulator rooted.
I also found the jp.naver.line.android.settings.xml file in a slightly different location than where daimyorl said above (but the credits go to him). For me it was into /data/data/jp.naver.line.android/shared_prefs/
Then, the complete instructions that worked for me are:
Restore Line with Titanium Backup (app+data) (DON'T OPEN THE LINE APP YET!)
Log into a shell and delete the settings:
Code:
su
sqlite3 /data/data/jp.naver.line.android/databases/naver_line
delete from setting;
.quit
Remove jp.naver.line.android.settings.xml
Code:
rm /data/data/jp.naver.line.android/shared_prefs/jp.naver.line.android.settings.xml
Open the Line app and it will ask you to enter your user and password. It will also ask your phone number for the confirmation SMS.
Enjoy!
norike said:
Got it! I was missing the su command to make the emulator rooted.
I also found the jp.naver.line.android.settings.xml file in a slightly different location than where daimyorl said above (but the credits go to him). For me it was into /data/data/jp.naver.line.android/shared_prefs/
Then, the complete instructions that worked for me are:
Restore Line with Titanium Backup (app+data) (DON'T OPEN THE LINE APP YET!)
Log into a shell and delete the settings:
Code:
su
sqlite3 /data/data/jp.naver.line.android/databases/naver_line
delete from setting;
.quit
Remove jp.naver.line.android.settings.xml
Code:
rm /data/data/jp.naver.line.android/shared_prefs/jp.naver.line.android.settings.xml
Open the Line app and it will ask you to enter your user and password. It will also ask your phone number for the confirmation SMS.
Enjoy!
Click to expand...
Click to collapse
i'm gonna try it tonight.. i really hope it does work cause LINE about backup chat is so so annoying !!
i hope it works, thank you !!!
i'll give u feedback later!
woawwwwwww !!!!!!!! thank you my friend !! IT WORKS !!! now i don't have to copy every single chat backup anymore!!!
thank you!
Can I import to a different phone number?
Thanks for the guide. Does this work if I want to import my chat history to a completely different phone number? But I'll still be using the same android phone.
lishanshung said:
Does this work if I want to import my chat history to a completely different phone number? But I'll still be using the same android phone.
Click to expand...
Click to collapse
I have no idea, but give it a try an tell us what you find!
Thank you ! I was looking for a good way to restore my chats, seems your's is great !