RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship
http://www.smart-phones.be/
I'm thinking It's WM5 AKU 3.3.1. but i must go ....
Hello,
Can you please upload it on rapidshare or similar.
My IMEI is not accepted on smart-phone site.
Thanks,
Regards
Same for me : my IMEI is not accepted ...
If somebody could upload the file ...
I hope I'm not breaking any rules...
Here it is:
Code:
RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship.exe
http://rapidshare.com/files/28220588/hermes_fr.rar
hi,
thanks for he head up, i have downloaded the rom but i have a question will i lose warranty if i install this rom ? should i consider it official rom as in from "europe htc" ? and finally can i do the upgrade using windows vista with Windows Mobile Device Center ?
thanks,
i||uSi0n^
dorways said:
I hope I'm not breaking any rules...
Here it is:
Code:
RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship.exe
http://rapidshare.com/files/28220588/hermes_fr.rar
Click to expand...
Click to collapse
Thanks, will try this one...
This 's extract version from RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship.exe
OS+EXTROM (no radio,IPL,SPL) request hardspl olipro.tested
http://rapidshare.com/files/28244789/RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275.rar.html
Good rom
viva belgium
voice command 1.5 prob
HI,
did upgrade with this rom and everything is ok... but VC 1.5
each time i start it, it says Vc has encountred a problem , restart it and retry.
I also noticed that VC settings has now an "activated " and "pswd protected" check box. the problem is that, if i toggle the activated checkbox and klick ok , it won't stay toggled .
Can anyone help me please
Thanks
Th
No problem for me.
The audi car kit's issue is solved but the screen alignement's probleme still...
perfect for me too
I can't turn on my wifi anymore. Who has the same problem ?
fine for me, sorry
for me too, no pb with wifi.
try a hard reset
Hi all,
I would like to send my hermes for repair and upgrade to this ROM but my bootloader is still SPL-1.40.olipro !
How can I replace them?
Hi,
I need this rom, but the link does'nt work anymore. Could someone re-upload it or send it to me ?
TIA
Grom
Dear All
I have upgrade the atom with the hp rom version 1.12.00wwe, 1.00.01BL. The rom was successfully upgraded but when the atom restart, they will not boot and resetting agin and agin. I have tried to enter bootloader but i can't.
Please help in this regard
thanks.
madil said:
Dear All
I have upgrade the atom with the hp rom version 1.12.00wwe, 1.00.01BL. The rom was successfully upgraded but when the atom restart, they will not boot and resetting agin and agin. I have tried to enter bootloader but i can't.
Please help in this regard
thanks.
Click to expand...
Click to collapse
WTF LOL!!!! you flashed your atom with a HP ROM? GL mate!
Help NEEDED Lolzzz
madil said:
Help NEEDED Lolzzz
Click to expand...
Click to collapse
Go to ATOM wiki and see instructions to recover Semi BRICK ATOM.. sometimes if u r lucky.. u may retreive ur ATOM..
mmm really pitty.. u used a HP ROM..
Im able to see the JPG on the start showing HP IPAQ NHOCBANME
version 1.12.00 WWE
1.00.01 BL
but we are unable to connect it via usb cable and also unable to enter the bootloader...
Also after showing the JPEG it continuolsy start reseting and coming back again on JPEG ....
Hi madil, I encountered the same problem as yours, and I found a way to recover the bootloader to your xda atom, read this post http://forum.xda-developers.com/showthread.php?p=2184254#post2184254, hoping my solution would help you as well, and just hope that I'm not too late
Good luck man
madil said:
Dear All
I have upgrade the atom with the hp rom version 1.12.00wwe, 1.00.01BL. The rom was successfully upgraded but when the atom restart, they will not boot and resetting agin and agin. I have tried to enter bootloader but i can't.
Please help in this regard
thanks.
Click to expand...
Click to collapse
Oh oooooo You flash atom by Hp rom , so that use JTAG only.
--------------------------------------------------------------------------------
hi...
please someone help me,
today i upgraded to a new wm6.1 Rom for HTC P3400 which was posted in gene forum here at XDA Developers , after successful upgrade my phone restarted n got stuck at bootloader.
i hv tried almost every solution avaible at Forum XDA developers, but still same condition.
i hv hard reset it several times, also gave unsuccessful try to Mtty , and gene unbreak.
please someone tell me how to unbreak my device, becuz i hv gone through almost every solution, but nothing working.
ther is solution for newer genes in "Gene Forum" but tht also not workin on my old gene.
and please tell me that can i send it to HTC india, as it is still under warrenty.
i m afraid that they wont repair it as i was using custom wm 6.1 roms
so please somebody help me out. i m really in grt tension....
DUDE YOU WANT TO TROUBLESHOOT AND STILL NOT POSTING ANY INFO ABOUT YOUR PHONE? WHATS WRONG WITH YOU?
Sorry for the caps, but Please post ONBL, SPL etc if possible
then only a solution can be derived. Post everything that you can remember aboout your phone as well as what is written on the sticker at the bottom of the packaging box of your phone.
And please dont post full serial no, only the first 3 numbers like HT8xxx or HT7xxx etc.
See you.
krazy_about_technology said:
DUDE YOU WANT TO TROUBLESHOOT AND STILL NOT POSTING ANY INFO ABOUT YOUR PHONE? WHATS WRONG WITH YOU?
Sorry for the caps, but Please post ONBL, SPL etc if possible
then only a solution can be derived. Post everything that you can remember aboout your phone as well as what is written on the sticker at the bottom of the packaging box of your phone.
And please dont post full serial no, only the first 3 numbers like HT8xxx or HT7xxx etc.
See you.
Click to expand...
Click to collapse
dear frnd sorry for my mistake....
my phones serial no is starting like HT807XXXXXX
but its not P3400i, its was having WM5 by default
even hving HT8XX serial i was successfully using all the ROMs Including fusion, PDAViet etc etc, ther was no problem
but problem started when i upgraded my phone to WM6.1 Stock ROM
http://forum.xda-developers.com/showthread.php?t=461351
i think this ROM is provided by u.
it was shown that rom is for devices with serial HT8XX,
so my phone is also HT8XX, thn i gave it a try, upgrade was successful,
but after ungrade device rebooted and my phone got stuck at bootloader only.
Showing info like this..
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.79.90
OS 1.7.0.0
AND my 1st boot screen is also changed since i upgraded to PDAViet rom
so is ther any way to restore original HTC white logo bootscreen.
hey i think this is just an old gene with HT8XX serial, becuz all the Roms were working good.
and for the 1st time i upgraded to Rom for HT8XX and my phone got bricked.
hey please............................................... help me out
and lemme know if u want any other info abt phone.
i m online most of the day, so please reply as soon as possible....
hksin1988 said:
dear frnd sorry for my mistake....
my phones serial no is starting like HT807XXXXXX
but its not P3400i, its was having WM5 by default
even hving HT8XX serial i was successfully using all the ROMs Including fusion, PDAViet etc etc, ther was no problem
but problem started when i upgraded my phone to WM6.1 Stock ROM
http://forum.xda-developers.com/showthread.php?t=461351
i think this ROM is provided by u.
it was shown that rom is for devices with serial HT8XX,
so my phone is also HT8XX, thn i gave it a try, upgrade was successful,
but after ungrade device rebooted and my phone got stuck at bootloader only.
Showing info like this..
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.79.90
OS 1.7.0.0
AND my 1st boot screen is also changed since i upgraded to PDAViet rom
so is ther any way to restore original HTC white logo bootscreen.
hey i think this is just an old gene with HT8XX serial, becuz all the Roms were working good.
and for the 1st time i upgraded to Rom for HT8XX and my phone got bricked.
hey please............................................... help me out
and lemme know if u want any other info abt phone.
i m online most of the day, so please reply as soon as possible....
Click to expand...
Click to collapse
Just flash it with WM6 Original ROM (India) guys, I don't see much improvements in WM6.1, and your SPL is original. Do it in the BootLoader Screen, and flash it via RUU.
npiyanut said:
Just flash it with WM6 Original ROM (India) guys, I don't see much improvements in WM6.1, and your SPL is original. Do it in the BootLoader Screen, and flash it via RUU.
Click to expand...
Click to collapse
hey i tried upgrading to original wm6 but it always shows error at 2%, "Invalid Vendor ID" n my phone gets restart.
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
krazy_about_technology said:
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
Click to expand...
Click to collapse
I tried upgrading to stock WM5 Rom given here
http://forum.xda-developers.com/showthread.php?t=382063
but while ungrading it is showing Invalid Vendor ID, and my phone is getting restart ...
so ,,,,,, is ther anyway to hspl my phone or something ???
and i also tried this WM5 Rom also
http://forum.xda-developers.com/showthread.php?t=375553
but still......invalid vandor ID at 2%
nd...no progress..........!!!!
3 days...without phone....its just like hell !!!
hksin1988 said:
and i also tried this WM5 Rom also
http://forum.xda-developers.com/showthread.php?t=375553
but still......invalid vandor ID at 2%
nd...no progress..........!!!!
3 days...without phone....its just like hell !!!
Click to expand...
Click to collapse
Bro "
Feeling very sad for your Phone.
Can you give me the screen shot where you stuck?
I know u provided all necessary Info ,but pls it may help me out.
Take a snap of your phone screen with another phone and upload it.
I flashed that rom that u have flashed (WM6.1 stock rom mirrored by crazy_about_tech.) and mine also stuck in boot loader,
but immediately just flash back Fusion 9 and my phone alive again.
Please don't blame anyone for anything.
Here, all are together for helping each other and sharing their PDA experiences not making anyone's phone DEAD.
rakesh_4utoo said:
Bro "
Feeling very sad for your Phone.
Can you give me the screen shot where you stuck?
I know u provided all necessary Info ,but pls it may help me out.
Take a snap of your phone screen with another phone and upload it.
I flashed that rom that u have flashed (WM6.1 stock rom mirrored by crazy_about_tech.) and mine also stuck in boot loader,
but immediately just flash back Fusion 9 and my phone alive again.
Please don't blame anyone for anything.
Here, all are together for helping each other and sharing their PDA experiences not making anyone's phone DEAD.
Click to expand...
Click to collapse
First of all....i m so sorry for my behaviour....if anyone felt bad.....100times sorry..and i m blaming No one.....
even i m very happy to be a member so such a great forum....which gave me good knowledge all the time.....
anyways.......here r some screen shot wher i my phone is stuck...
please ask me...if any more info needed.....please guys,,,,help me out here....
m very stressed....
How to remove Smart Mobility Boot Screen
Hey Guys please also tell me that how can i remove this Smart Mobility Boot Screen and revert back to Old HTC logo White screen...
any solution ???
Looks like you need to do a hard-spl again before you flash another ROM.
Try orefcov method here
ramersonw said:
Looks like you need to do a hard-spl again before you flash another ROM.
Try orefcov method here
Click to expand...
Click to collapse
i hv already given this a try.....but ended up getting error all the time.....
i tried Mtty i dont know how many times but in last the error comes
and one more thing.....tht unbrick solution is for P3400i and newer GENEs (HT 8XX), even my phone's serial no starts frm HT8XXX, although it is old version.....ONPL is 1.07.0.0 ...
while in newer genes it is 1.10.0.0 n more
so this solution wont apply on mine...
BUT Still i gave it a try.......not workin for me...
hksin1988 said:
First of all....i m so sorry for my behaviour....if anyone felt bad.....100times sorry..and i m blaming No one.....
even i m very happy to be a member so such a great forum....which gave me good knowledge all the time.....
anyways.......here r some screen shot wher i my phone is stuck...
please ask me...if any more info needed.....please guys,,,,help me out here....
m very stressed....
Click to expand...
Click to collapse
Oh ,earlier you were using wm 6.1 by PhamQuang ,that's why your splash screen changed but this is not a big issue,Once your phone alive again this can be solved in minutes,
Try this(I don't know you tried it or not)
plug ur phone to PC and reset ur phone keeping the camera and the power button pressed.
If you see the tricolor screen with a Text USB in left bottom corner of your phone, leave the buttons or try again ,Once tricolor screen appears then only you can flash your original Wm5 (24 march 2007.exe) because your SPL is original till now.
http://forum.xda-developers.com/showthread.php?t=382063
try it.
rakesh_4utoo said:
Oh ,earlier you were using wm 6.1 by PhamQuang ,that's why your splash screen changed but this is not a big issue,Once your phone alive again this can be solved in minutes,
Try this(I don't know you tried it or not)
plug ur phone to PC and reset ur phone keeping the camera and the power button pressed.
If you see the tricolor screen with a Text USB in left bottom corner of your phone, leave the buttons or try again ,Once tricolor screen appears then only you can flash your original Wm5 (24 march 2007.exe) because your SPL is original till now.
http://forum.xda-developers.com/showthread.php?t=382063
try it.
Click to expand...
Click to collapse
Yes sir.....i hv already tried it......
i did the same........enter in bootloader..the tricolor screen....atteched to USB....in phone it was also showing the text USB in left corner..
than i tried to flash original WM5 rom (24 march 2007) ......but alas.....the same problem......error at 2% sayin "Invalid Vendor ID"
hksin1988 said:
Yes sir.....i hv already tried it......
i did the same........enter in bootloader..the tricolor screen....atteched to USB....in phone it was also showing the text USB in left corner..
than i tried to flash original WM5 rom (24 march 2007) ......but alas.....the same problem......error at 2% sayin "Invalid Vendor ID"
Click to expand...
Click to collapse
Your Splash screen also may made ur phone's warranty void.This is a big problem.let me think for a day.
My phone's Sn is HT7XXXX
rakesh_4utoo said:
Your Splash screen also may made ur phone's warranty void.This is a big problem.let me think for a day.
My phone's Sn is HT7XXXX
Click to expand...
Click to collapse
yea dear...think something................i m very thankful to u....tht u r takin interest in my problem.....
Finally Gene is alive......thanks to HTC service centre..
Finally i gave my phone to HTC service centre...and...ther made my gene alive once again...
Now m very happy now...!!!
i would like to thank every XDA forum member for helping me out and givin me response.
i mistakenly flashed wm6.1 stock rom which was for HTC P3400i and newer P3400, so my phone got stuck at bootloader.
i tried almost each n every solution avaible here at XDA forum , but nothing helped me out.
as each time it was showing me error in flashing back to original ROM.
finally i gave up and decided to give my phone to HTC service centre since it was under warrenty...
so...now my phone is OK....it has original wm5 once again.,,,
and i will flash to Fusion 9.0 rom tonight.....
hello everyone I have a 100 niki I unlocked with your methods thank you it went well now I have a problem with the camera that not work (still black) and the sound cut that I spend the first call.
I tried to change the hardspl in 1.22 or 1.16 come to 100% is successful and when I reboot: still 1.15!
Niki 100 : win 6.5 CE OS 5.2.21501 (build 21812.5.0.50)
Radio version 1.64.08.21
Protocol 25.74.40.02h
tried to change radio and Os and the same problem
thank you for any ideas and any help from you
sorry for my bad English
The Solution
for those in the same case here as I should always start by copying the SSPL on the NIKI then updates the SPL.
thank you my camera : ok / sound : ok
thanks a lot
can u share how do u solve it ??
MEJDI78 said:
for those in the same case here as I should always start by copying the SSPL on the NIKI then updates the SPL.
thank you my camera : ok / sound : ok
thanks a lot
Click to expand...
Click to collapse
Hello...
I have this kind of problem...
can you teach us how to solve this???
I'm try to change the Firmware, and it cause of non working camera and sounds...
Pls Help...
bR
oasisnhoa08 said:
Hello...
I have this kind of problem...
can you teach us how to solve this???
I'm try to change the Firmware, and it cause of non working camera and sounds...
Pls Help...
bR
Click to expand...
Click to collapse
what radio version and what firmware you are use actual?
Reply
As he wrote, when you wanna change the SPL, you should start by copying the SSPL to your phone and running it, then apply the hardSPL.
It's all well documented here
http://forum.xda-developers.com/showthread.php?t=355730
thanks to jockyw20001
I had the same issue and after following his instructions step by step i fixed it!
P.s for you with the camera issue, try installing a new radio firmware after the hardSPL upgrade.
Good luck to you, hopee i t works
If you've got one of the newer ROM's on your phone, you'll need the 1.65.XXX radio or higher I think, they include newer drivers that some of the new ROMs require.
Try flashing a few new radios onto your phone, one should fix it for you.
Hello guys i flashed my niki100 yesterday with radio 1.71 and Original OEM 6.1 Rom i tryed to translate from GER to EN wich worked but once i rebooted phone to insert SIM and booted back up touch screen was unresponsive i rebooted it 2 more times before that and it work now it doesnt, now i flashed 1.58 radio and tryed Insomnia and any other ROM there is on site and tryed few diffrent radio and still no touch screen , what could cause this help me please
wizzardz01 said:
Hello guys i flashed my niki100 yesterday with radio 1.71 and Original OEM 6.1 Rom i tryed to translate from GER to EN wich worked but once i rebooted phone to insert SIM and booted back up touch screen was unresponsive i rebooted it 2 more times before that and it work now it doesnt, now i flashed 1.58 radio and tryed Insomnia and any other ROM there is on site and tryed few diffrent radio and still no touch screen , what could cause this help me please
Click to expand...
Click to collapse
hi mate.i
sorry to hear all pal.
do a hardreset.flash the original rom.if u don't have one search it u will find one.after flashing again hardreset.then c .hope that helps.if u get everything normal,try my V-6
c if u get things done
regards
Bro do you have msn i would like your assistance