Related
Hello all,
I got a friend of mine who came to me with a device-password locked Hermes, which password he cannot recall (actually his girlfriend...). I said I would be willing to give him a hand to unbrick the device. The problem is that I cannot install any ROM on the device, coz I got an error connection right after the screen goes white and the percentage count should normally start.
So I put the Herm in Bootloader (spl-1.06) and try to flash the OliPro Bootloader. The procedure goes correctly until the step where the upgrade itself should begin, counting from 0%... here, I got:
ERROR [262]: Update error: communication error.
I also tried to flash a ROM directly, but since my Bootloader is 1.06, I didn't find a CID match ROM, so it also failed. The Herm is now not bricked, but it stays at the password input screen, so cannot enter windows properly.
Any help on this?
Thanks,
Ionutz
Interesting since you are trying to go around something HTC probably did not want for people to go around due to security....
agovinoveritas said:
Interesting since you are trying to go around something HTC probably did not want for people to go around due to security....
Click to expand...
Click to collapse
yes, i grih you,and normally i wouldnt even try to do such thing, if it hadnt been for a friend of mine which i know.
besides i would like to learn more stuff about my Herm and this is one thing I havent seen discussed here, although i keep reading xda forums for such info.
just found the solution: i flashed another ROM with same CID since my BL was 1.06, but with BL 1.04. After that, I managed to flash any other ROM and automatically upgrade the SPL to 1.10 or 2.10 Oli accordingly.
If any of you interested and dont get the short explanation, PM me.
cheers,
Io, owner of 2 kicking TyTn's
BL 1.06 didnt allow devices with a different CID to be flashed,
eg: my TyTN had the CID: QTEK001 so i couldnt flash a ROM destined for a device with CID: VODAP001
But BL 1.04 had a bug where you COULD flash any ROM to the device regardless of the CID, the first attempt shows a vendor ID error, then try again and it will flash no problem.
The simplest way I would have got past the device security problem would have been a hard reset.
mrvanx said:
BL 1.06 didnt allow devices with a different CID to be flashed,
eg: my TyTN had the CID: QTEK001 so i couldnt flash a ROM destined for a device with CID: VODAP001
But BL 1.04 had a bug where you COULD flash any ROM to the device regardless of the CID, the first attempt shows a vendor ID error, then try again and it will flash no problem.
The simplest way I would have got past the device security problem would have been a hard reset.
Click to expand...
Click to collapse
I know the details about BL 1.04 vs 1.06, thats why I flashed a BL 1.04 ROM, but with the same CID QTEK_001, or smth.
I have to admit though that I never ever thought about doing a simple hard-reset. I guess it would have been to easy, I jumped to more complicate scenarios. Thanks for the help anyway, i gotta learn that.
Thanks mrvanx, glad I read down the whole thread to the part about a simple hard reset working. I lent my 8525 to a friend, thinking he might be interested in buying it, then he didn't have the money, and after I listed it on ebay today, I charged it up to flash to ATT stock, found it password locked, called my friend a few times just getting his voicemail, so tried flashing, and it said the Hermes wasn't connected to the PC...
I figured there would be a solution here at XDA..and POOF, like magic here it is!
So yes, all I had to do was a hard reset, tested and it works, and it was simple, so thanks again mrvanx, although this thread is very old, glad I found it LOL!
Hi All,
I tried flash by wizard following http://forum.xda-developers.com/showthread.php?t=298967
Every thing went well but I was not able to HARD RESET. So instead I removed the battery and started it again. It starts up but got struck at screen which says
IPL 2.21.0001
SPL 2.21.0001
GSM 02.19.11
OS 2.18.00
Could some help me what to do now. I read some threads to go to Boot loader screen by pressing "Camera" + "Reset" button and got USB at bottom left and tried RUU with some thing available on forum but every thing failed saying "connection not established"
Please guide me to solve this problem.
if ur device is CID LOCKED "G4" u need to flash the official rom 1st then flash with any G4 safe rom available >>
USING :
ShellTool
http://forum.xda-developers.com/showthread.php?t=293480
or
SoftSPL
http://forum.xda-developers.com/showthread.php?t=329147
Thats the only way for G4 "CID LOCKED"
No...
If OS is not boot up correctly, both ways doesn't work because all of them requires to do in a working OS.
You should find your stock ROM or Wizard Love ROM, use the bundled RUU to flash it so you get the device working again, then use SoftSPL/flash HardSPL and use RUU to flash OS-only WM6 ROMs.
Yes starkwong you are right. I bought my device back working by flashing it with "wizard love" now its up and running. I would proceed with Soft SPL/Hard SPL and then try to flash it with WM6.
Hey guys I'm a newbie... I was playing around and trying to flash a new rom onto my wizard/8125. The program stopped responding on my PC so I had to restart it. Now my phone is stuck in the tricolor boot screen. It says USB is connected but activesync won't recognize it.
IPL. 2.21.0001
SPL 2.21.01ip
Please help me I just go the phone working yesterday..
The reason activesync won't recognize it is because the activesync program isn't installed on your device, provided the windows mobile can't start. At the boot screen, you can still flash the device. However, I wouldn't play around with flashing your 8125 unless you know what you're doing; there's a chance that you could turn your phone into a brick.
Try flashing it with the Wizard Love rom found here.
You might need the English Update Utility files found here.
Then, if your phone is CID locked, you can use the G4 SoftSPL from this post to flash it with the G4 safe rom of your choice. My 8125 would often freeze at 99% in the update process, but flashing first with Wizard Love would do the trick.
I got it. Thanks for you're help though. I just flashed it with a new ROM program and seemed to work just fine. Thanks again
I have exactly the same problem I am also stuck and I am also showing the IPL. 2.21.0001
SPL 2.21.01ip
How did you Supa solve your problem?
I reached this stage after sucessfully installing hardspl and CID_unlocking and then tried to upgade to WM6 and failed to do a hard reset instead remove battery ( I know very stupid )
MDA3 Blue Angel
MDA Artemis
MDA Touch
He All, I managed to resolve by reflashing using ROM 1.1 CID-locked edition by ppctuning.org by simply running it-
Thank you for allowing me to do a lot of reading fro this useful forum
stuck in tri color screen
im also having this tri color screen problem... and mine the screen says..
---------------------------------
| RUU |
|IPL 2.21.0001 |
| |
| |
|SPL 2.21.0001 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| USB |
---------------------------------
thats all.. every time when it reaches 99% it goes stuck for 2 minutes
and says
ERROR [302] : UPDATE ERROR
The ROM Update Utility has encountered communication errors during the update process. The program will guide you step-by-step to recover from the errors so you can continue the the update.
and done the recovery as the guided.
this has happend for 3 times...
help me ...
You have a G4, and its CID Locked. You'll need to flash the Wizard_Love rom - it will install sucessfully on G4 Cid Locked - and then cid unlock it, before trying to install any other ROM. You need to be carefull not to flash rom's with IPL/SPL information, that includes official ones from T-Mobile!
My ELF (Soft Black) is also stuck in the tri-color screen after trying to flash it.
IPL 1.15.0002
SPL 1.15.0000
Please HELP!!!!
First of all, thanks to all the uber-smart people in the forum that make new toys for my Wizard!
Rabbid, if yours is a Wizard G4, install the Wizard Love ROM as dferreira suggested. If you don't know, check sticky posts on how to ID your phone.
I had the same problem, stuck at the loader screen, because I forgot to soft-unlock my phone.
That's the last time I reflash my phone at 2 AM, after being up since 6AM the previous day
Wizard Love was useful for me!
I had the same problem (tricolor screen), but I flashed my Qtek A9100 and it came again! (I´m so happy)
the rom that I used was Wizard_Love_2.26.10.2.
I hope it be useful for all you, guys!
I have a question. If I was wrong flashed G4 Hard-SPL unlocked device, can I fix the problem using RUU? Usually, I used soft-SPL.
Thanks for the responses on this thread! lol
I used the Wizard love and I do have a g4 phone I checked a million times.
I used the process to Hardspl my T-mobile Wizard and when I turn the phone completely off and on it is the Love Wizard. I got the steps from the XDA Developers Wiki Site.
I wanted to use the Slim Edition of WM6.1 and I have downloaded the zip( or rar) but what do I need to do next. I thought I knew about the flash process because I had experience flashing with GBA and SP but apparently I know nothing.
What I originally did was run the hard-spl G4 program but when the screen popped up to install a ruu ( or the os i gussed) I closed out of it and instead opened the boot loader program that was located in the Slim Edition Folder. I lost connection to my g4 at the white screen...naturally panicked for 30 mins and then realized the soft reset button and did the manual boot loader screen. I then read this forum about the love wizard so just installed it out of fear to try the slim version again.
Also, the XDA Developer process says that the HardSPl process unlocks both SIM and CID is that incorrect? And do I need to be concerned with downloading Radios for my g4 model? Any help or flame would be appreciated at this point. Thanks.
All I want to do is use the T-mobile Wizard (g4) with WM6 or MW6.1 and for it to be unlocked.
Again, Thanks for your time
wafrea said:
Thanks for the responses on this thread! lol
I used the Wizard love and I do have a g4 phone I checked a million times.
I used the process to Hardspl my T-mobile Wizard and when I turn the phone completely off and on it is the Love Wizard. I got the steps from the XDA Developers Wiki Site.
I wanted to use the Slim Edition of WM6.1 and I have downloaded the zip( or rar) but what do I need to do next. I thought I knew about the flash process because I had experience flashing with GBA and SP but apparently I know nothing.
What I originally did was run the hard-spl G4 program but when the screen popped up to install a ruu ( or the os i gussed) I closed out of it and instead opened the boot loader program that was located in the Slim Edition Folder. I lost connection to my g4 at the white screen...naturally panicked for 30 mins and then realized the soft reset button and did the manual boot loader screen. I then read this forum about the love wizard so just installed it out of fear to try the slim version again.
Also, the XDA Developer process says that the HardSPl process unlocks both SIM and CID is that incorrect? And do I need to be concerned with downloading Radios for my g4 model? Any help or flame would be appreciated at this point. Thanks.
All I want to do is use the T-mobile Wizard (g4) with WM6 or MW6.1 and for it to be unlocked.
Again, Thanks for your time
Click to expand...
Click to collapse
Well,as you mentioned,its a G4 phone,it cannot be CID unlocked completely like a G3 device,however,it can be upgraded to wm6 with 'SoftSPL' or 'HardSPL',if you apply "hardSPL' it'll semi CID unlock the phone by flashing a patched IPL/SPL to the phone to trick it to think its CID unlocked temporarily,but it'll stay CID unlocked and "HardSPL' as long as you intentionally don't remove it and you can flash any wm6 or wm6.1 Rom on it. But always be warned that don't ever flash any Rom which have IPL/SPL included in it,it'll 'Brick' the phone.
Did you apply 'HardSPL' successfully ? what IPL/SPL... ? it displays at present.
Secondly,if you didn't have any signal quality or call missing problem with your present Radio Rom installed,then there's no need to upgrade.Some custom build wm6 or 6.1 Roms,do already include updated Radio Roms,which get flashed durinf Rom (OS) upgrade.
Thanks so much for responding.
I don't know what all happened to be honest. When I was using the Hardlsp G4 program after I got the white screen I thought I would cancel the rom that it wanted to install and install the Slim Edition. I was thinking that it was installing an OS and I wanted to substitute it for WM6.1 Slim edition I didn't know that I was cancelling out of the WM6 rom softspl . So to be honest I though I just Hardslp it but I didn't use the softslp which comes with the temporary CID unlock? Maybe that sounds right lol.
Regardless, Now I'm tring to figure out what to do obviously this phone works with T-mobile only and so I thought I could CID Unlock it and SIM unlock it with that program and now I'm thinking i'm screwed lol.
If I followed the HARDSLP directions again to the letter would I get the phone temerporarly CID & SIM unlocked so I can use it or have I messed it up to much? Oh, and the phone seems to be getting a signal although I can't call anyone but the bars are showing beside the indicator.
I did get an issue were when my phone went white it dissconected from activesync and so I had to manual get to the bootloader screen anyway.
Thanks zabardast_1
IPL/SLP 2.25.0001
GSM 2.25.11
OS 2.26.10.2
wafrea said:
Thanks so much for responding.
I don't know what all happened to be honest. When I was using the Hardlsp G4 program after I got the white screen I thought I would cancel the rom that it wanted to install and install the Slim Edition. I was thinking that it was installing an OS and I wanted to substitute it for WM6.1 Slim edition I didn't know that I was cancelling out of the WM6 rom softspl . So to be honest I though I just Hardslp it but I didn't use the softslp which comes with the temporary CID unlock? Maybe that sounds right lol.
Regardless, Now I'm tring to figure out what to do obviously this phone works with T-mobile only and so I thought I could CID Unlock it and SIM unlock it with that program and now I'm thinking i'm screwed lol.
If I followed the HARDSLP directions again to the letter would I get the phone temerporarly CID & SIM unlocked so I can use it or have I messed it up to much? Oh, and the phone seems to be getting a signal although I can't call anyone but the bars are showing beside the indicator.
I did get an issue were when my phone went white it dissconected from activesync and so I had to manual get to the bootloader screen anyway.
Thanks zabardast_1
IPL/SLP 2.25.0001
GSM 2.25.11
OS 2.26.10.2
Click to expand...
Click to collapse
Well, with your present IPL/SPL 2.25.0001,its not HardSPL,as you say it didn't complete and you closed it,therefore,its still with its original official bootloaders (IPL/SPL),no harm is done yet.
Now,if you wish to upgrade the phone to wm6,either you can do it with SoftSPL, which'll just temporarily trick the phone into CID unlock and flash the rom,but it'll revert back to CID locked status after the reboot of the phone and if you wish to replace the rom,you'll again have to apply SoftSPL again.Every time you want to change roms,you'll have to apply SoftSPL,but if you apply HardSPL once,it'll remain HardSPL and temporarily tricked into CID unlocked status till you don't remove it.You don't have to apply HardSPL again and again to flash roms,its possible to flash roms easily.but never flash a rom which contains IPL/SPL in it even the official Rom in HardSPL status.If ever you wish to revert back to official rom,first remove the HardSPL and flash the official Bootloaders (IPL/SPL) and then flash the official Rom.
Ahh Thanks a Million.
Zabardast_1. I know it sucks explaining that stuff a million times but it really helped me.
So, If I was wanting to get the Slim Edition WM6.1 I could just
Run HardSLP Program and complete the stepes provided
Then hook the phone up to the computer while its in windows os and then click the bootloader app for Slim Edition? Thus Installing Slim Edition
Then use the the lolwoz03 program to unlock my sim?
Or would the last step not be needed because of hardslp?
I do have Love Wizard on here so when I start the phone up those isp/lsp is what i got.
I think thats the last of my questions and then i'll leave you all alone lol
wafrea said:
Ahh Thanks a Million.
Zabardast_1. I know it sucks explaining that stuff a million times but it really helped me.
So, If I was wanting to get the Slim Edition WM6.1 I could just
Run HardSLP Program and complete the stepes provided
Then hook the phone up to the computer while its in windows os and then click the bootloader app for Slim Edition? Thus Installing Slim Edition
Then use the the lolwoz03 program to unlock my sim?
Or would the last step not be needed because of hardslp?
I think thats the last of my questions and then i'll leave you all alone lol
Click to expand...
Click to collapse
Yup! First apply 'HardSPL' correctly,read the HardSPL thread carefully understand the method and do it correctly and let it complete,the screen will certainly go white,don't be afraid,its the essential part, it'll only take a minute or so,if it doesn't go white,then consider something is not correct ,after successful application of HardSPL,the phone will reboot and IPL will be 2.21.0001 and the SPL is 2.21.olip,it confirms the successful application of HardSPL.Now its ready to flash any wm6 or 6.1 rom,just hook up the phone and run the RUU in the rom,it'll start to upgrade
Well,regarding SIM unlock with lokiwiz03,you shud do it before HardSPL its much recommended.HardSPL will only flash the patched IPL/SPL which let your device think it has SuperCID (aka CID unlocked) but doesn't SIM unlock,for SIM unlock you have to use lokiwiz03 and generate a SIM unlocking code which you'll insert when using another SIM.
Well, Thanks again
All I know is when I run Lokiwiz it says it can't copy files and it might be inuse. So if there is a better way of unlocking or a way of unlocking the sim after i do the hardslp i'm up for it haha whatever works the best. I think it says it can't find the C:/windows/itsutils.dll and then it says it can't save a certian bat file because it doesn't exsit.
Okay I fixed it by copying the files Cert_SPCS and EnableRapi to folder Lokiwiz03 was in on my computer.
Well, I ran the SlimEditon romupdate utility and it took my phone to tri color screen then activesync discconected and it says it can't connect to my phone now. So did I click on the wrong program?
Thanks a million + Zar
I read something like If I take the .nbf file and transfer it into the muns ruu folder and run muns ruu that it should fix it but it says something about an aku and far when i start the program so I'm hesitent. Also I'm stuck in the Bootloader screen? Should I use the wizard love rom again and then when it finishes use the slimedition with muns ruu?
Well I did that from the bootloader screen (tricolor Screen) and slimedition works the only thing that sucks is that it still shows the wizard love pic when displaying my ipl slp and gsm info...
wafrea said:
Well, Thanks again
All I know is when I run Lokiwiz it says it can't copy files and it might be inuse. So if there is a better way of unlocking or a way of unlocking the sim after i do the hardslp i'm up for it haha whatever works the best. I think it says it can't find the C:/windows/itsutils.dll and then it says it can't save a certian bat file because it doesn't exsit.
Okay I fixed it by copying the files Cert_SPCS and EnableRapi to folder Lokiwiz03 was in on my computer.
Well, I ran the SlimEditon romupdate utility and it took my phone to tri color screen then activesync discconected and it says it can't connect to my phone now. So did I click on the wrong program?
Thanks a million + Zar
I read something like If I take the .nbf file and transfer it into the muns ruu folder and run muns ruu that it should fix it but it says something about an aku and far when i start the program so I'm hesitent. Also I'm stuck in the Bootloader screen? Should I use the wizard love rom again and then when it finishes use the slimedition with muns ruu?
Well I did that from the bootloader screen (tricolor Screen) and slimedition works the only thing that sucks is that it still shows the wizard love pic when displaying my ipl slp and gsm info...
Click to expand...
Click to collapse
Your phone is still running wizard_love_rom,it didn't upgrade to slimEdition,perhaps its still not correctly with HardSPL patched IPL/SPL,did you get it HardSPL ?
Well, everything else works fine. I think I soft flashed my phone back when I messed up and so it reset the loader screen with the ipl spl info and then when I hard Slp over top of it the hardslp just didn't remove the screen. It says all the information that it should it just has that love picture on it that is kinda emberresing but I'll live with it to have a working phone and not a shinny brick.
Thanks for everything again and again Zar, Unless you can tell me how to show the battery life correctly on the main screen in Slim Edition I finally don't have anymore questions for you . lol
Thanks
I have a 8125 G4 sim unlocked w lokiwiz and a flashed WMSE5_rev4 with soft spl, well the problem that i have now is that i recentley tried to flash a new wm6 rom without hard spl ( yeah i know stupid) And now i am stuck on tri color boatloader screen no matter if i turn it off or not still goes back to the same thing. and yes the rom that i was flashing was g safe, i think were i messed up is not CID unlocking it with hard spl?when i tried to flash the new rom it went all the way to 100% and then gave error after that. NO activesync connection right now
questions
1- DID I BRICK IT
2- is there a way to recover this device
unlock it again. (CID) i had the same thing on my wiz g4. and no. is not bricked.
ok thank you and i will let u know what happens so i should use hardspl right?
ok thank you and i will let u know what happens so i should use hardspl right?
still lost
Ok this is where im at i have tried to flash other roms, NOTHING. the phone is cycling between charging(when on charger) and bootloader every few seconds then i pull it off and nothing. i cant get hard spl to recognize the phone nor will activesync. i understand that i need to CID unlock the phone but i cant even get that far?
any suggestions? please walk me through it im not stupid but HTC's are a whole new ball game for me. im used to motorolas(by the way they suck!)
thanks in advance
Get the original stock ROM for your Wizard version and flash it to get your OS back, then you can HardSPL or SoftSPL.
p.s. G4 Wizard does not have free solutions to actually "CID unlock". Either HardSPL and SoftSPL are hacks that tricks the RUU to allow flashing, you will still see your device as Locked in WST(Wizard Service Tool).
go to activesycn settings turn OFF allow usb connections and retry
I read it here in another thread after I returned My P4300 to cincinati bell in exactly the same condition you described.
Good Luck
hey, im new but have read many of the pages here. i have burnt roms to my first wiz (G3) unlocked it and everything went well. i came about a wiz (G4) last week wm5 bland rom locked and want to get wm6 on it so after my research i went to the IMEI unlock site and purchased the unlock for the g4
the unlock seemed to go well the first time but, it won't come out of boot loader mode
i ran hornet o.10 for g4 it runs and completed to 100 % and then on reboot it comes up with the boot screen again
IPL 2.21.0001
SPL 2.21
i ran the tnt 1933 rom this morning and it completed 100% but still i have a boot screen
i know im missing something the battery power is fine .
i downloaded the stock rom for cingular but it won't load it has error "(294) INVALID VENDOR"
any suggestions ...
thanks in advance for your input
Airborne_Pathogen said:
hey, im new but have read many of the pages here. i have burnt roms to my first wiz (G3) unlocked it and everything went well. i came about a wiz (G4) last week wm5 bland rom locked and want to get wm6 on it so after my research i went to the IMEI unlock site and purchased the unlock for the g4
the unlock seemed to go well the first time but, it won't come out of boot loader mode
i ran hornet o.10 for g4 it runs and completed to 100 % and then on reboot it comes up with the boot screen again
IPL 2.21.0001
SPL 2.21
i ran the tnt 1933 rom this morning and it completed 100% but still i have a boot screen
i know im missing something the battery power is fine .
i downloaded the stock rom for cingular but it won't load it has error "wrong update utility"
any suggestions ...
thanks in advance for your input
Click to expand...
Click to collapse
Are you sure SPL is 2.21 and not 2.21.0001 as IPL 2.21.0001 ?
Well,if its 2.21 only,the phone's got mixed Bootloaders (IPL/SPL),IPL 2.21.0001 are G4 and SPL 2.21 is G3,I don't know how you got it,but your phone is 'Bricked'
mmm it figures
so it appears there could be a problem with the imei program,
as i said it never came out of boot mode after the unlock
and no errors were shown ...
i could get another and replaced the main board, this one is in new condition
except for the custom bricked rom . in the future i will not play with a g4
thanks for the diagnosis, no way to flash a new spl / ipl ... i did read that if
it booted you could get it back in some chance cases .. i am curious as to how this happened (others not doing this for a hobby could brick there only phone)
step 1 - ran imei unlock
never came out of boot mode after
2- flashing the to above roms said to be G4 safe
i never look to see what the ipl / spl were before
i looked with the wizard tool but didn't save it
well you live and learn, it's good for parts now off to ebay for another crack at it ...
thanks everyone ... the best thing about this phone is everything you can do to it
with help from those who know ...
I recommend trying to flash back to original service provider ROM, then unlock again and try another. As long as you can get to bootloader (tri-color screen), there's still hope for your phone. When it's in this mode, and you plug in the USB, does it say USB at the bottom of the phone screen? If so, you are not dead yet.
Custom build wm6 roms like TNT etc... never Brick a G4 phone as no IPL/SPL is included in them,they are completely safe for G4 devices.What I can gather,it must be the wrong imei unlock code perhaps.
Well,like Myrddin Wyllt said,there's no harm in trying,so if it gets into Bootloaders,try to flash the official rom and if there's an error "wrong update utility" ,replace the RUU in the rom with this RUU and run this RUU,hope it might work.
Myrddin Wyllt said:
I recommend trying to flash back to original service provider ROM, then unlock again and try another. As long as you can get to bootloader (tri-color screen), there's still hope for your phone. When it's in this mode, and you plug in the USB, does it say USB at the bottom of the phone screen? If so, you are not dead yet.
Click to expand...
Click to collapse
yes sir i can talk to the phone from xp pro ..
USB does come up
so i can swap the RRU with the nbf file i need ...
no file name change required on the xxx.nbf file
thanks alot for the(schooling) advise ... i was going to need to brick another to make some book ends... this could save me that
stuck
Airborne_Pathogen said:
yes sir i can talk to the phone from xp pro ..
USB does come up
so i can swap the RRU with the nbf file i need ...
no file name change required on the xxx.nbf file
thanks alot for the(schooling) advise ... i was going to need to brick another to make some book ends... this could save me that
Click to expand...
Click to collapse
ok, i swapped out every RUU i could find i get errors from
read file
invalid vendor id
wrong update utility
im too new to figure this out ..can you extract a ipl / spl from an
official rom and then flash that to get the boot loader's back in sync
i found the att 8125 ipl /spl nbf when i flash, it runs to 100% reboots but no changes
anyone have a link to flashing just the ipl / spl on the g4
i am most thankful for any advise ..
try running the hardspl on phone, it might just work to revert it back to a G4 spl.
Link to HardSPL : http://forum.xda-developers.com/showthread.php?t=332320
and G4 ipl and spl here : http://forum.xda-developers.com/showthread.php?t=342744
Also I paid to the IMEI Check and I had to change the plate because the PDA died as yours. E had not returned to the money of the IMEI Check only reply to me was that it had to change of plate ..... It had the unblocked CID?
bastards
yes they won't return my money ... somehow they bricked my phone
i would use the hard /spl and not the imei those guys are assholes