After some tests, I've seen that the unique way to use an alternative program to view SMSes, even from "All messages" on Manila2D, is to replace tmail.exe... but after that some things no more work well, such email, activesync, etc.
I decided then to build a little HiJack to put over the original tmail.exe, that when we try to view SMSes it executes a link, while for ohter operations starts the original one.
tmail_hijack_1_0_0_0
Use:
1. make a copy of \windows\tmail.exe in \windows\tmailm.exe
2. overwrite the old tmail.exe with the new one
3. create in the \windows directory a link to the program we want to use for the SMSes view, and name it tmailsms.lnk
if everythink is right, when you press on "All messages" the new program will open up, while all the rest remains as is
l0v3r
Could You please throw in some screenshots? You know that a picture is always worth more than a thousand words.
worked for me (using vito sms-chat) but is there a way to have it open the sms app when i click on the message in manilla (it still goes to tmail)?
aiiro said:
Could You please throw in some screenshots? You know that a picture is always worth more than a thousand words.
Click to expand...
Click to collapse
There's no screenshot... it's a program hijack, nothing to see, sorry
swyecso said:
worked for me (using vito sms-chat) but is there a way to have it open the sms app when i click on the message in manilla (it still goes to tmail)?
Click to expand...
Click to collapse
No, I've not found a solution at the moment... I'll investigate more
l0v3r
Could you tell me how to rename the original tmail.exe? I tried to rename/delete/duplicate it in Resco File explorer but it just tell me "Access denied" and even I cannot copy the file to another folder. Thanks a lot.
reggme said:
Could you tell me how to rename the original tmail.exe? I tried to rename/delete/duplicate it in Resco File explorer but it just tell me "Access denied" and even I cannot copy the file to another folder. Thanks a lot.
Click to expand...
Click to collapse
You are right... I hope that somebody find a way do do it ... I created a copy by extracting it from the ROM image with Ervius kitchen (or any other kitchen able to make a dump)
Try closing tmail.exe using a Task manager before overwriting it with Resco Explorer or total Commander.
Hi... Good job
Your app does not work with new tmail.exe included in WM build 23071 dpi 96...
Can you solve the bug please?
can anyone repost tmail.exe i not follow instruction well also how i create link? ty
Can not overwrite or change tmail.exe ...
anyone have solution they can help? Thankyou!!
dang rippen offen
dude, this is a rip off,
i bet you used vj's identical codes....
vjbrisk.....
at least give him credit for the idea.
Can anyone plz tell me how remove tmail.exe I have try stop process but it will not let me!
darkmurder said:
Can anyone plz tell me how remove tmail.exe I have try stop process but it will not let me!
Click to expand...
Click to collapse
Sorry, have not enought time lately... to replace tmail.exe you have to rename it to whatever you want, and only after reboot you can delete the renamed copy... but place the new tmail.exe right after you renamed the old one, BEFORE reboot the device, otherwise a new protected copy of the old one comes out.
bevoc said:
dude, this is a rip off,
i bet you used vj's identical codes....
vjbrisk.....
Click to expand...
Click to collapse
No, its not the same: vjbrisk starts the program you linked, stop. This starts the program you linked OR the old one, based on the parameters it receives.
But, there are some situations on reboot that starts tmail with the same parameter (-service "SMS") and load the linked program on reboot (unwanted) but I have no time to check if its solvable.
l0v3r
l0v3r said:
Sorry, have not enought time lately... to replace tmail.exe you have to rename it to whatever you want, and only after reboot you can delete the renamed copy... but place the new tmail.exe right after you renamed the old one, BEFORE reboot the device, otherwise a new protected copy of the old one comes out.
No, its not the same: vjbrisk starts the program you linked, stop. This starts the program you linked OR the old one, based on the parameters it receives.
But, there are some situations on reboot that starts tmail with the same parameter (-service "SMS") and load the linked program on reboot (unwanted) but I have no time to check if its solvable.
l0v3r
Click to expand...
Click to collapse
Hey mate I cannot rename mine for some reason, it is checked as in rom in Total Commander and if I try rename it its either access denied or tmail.exe will just revert back straight after, does anyone know how I can remove this from a ROM or make it change its name as I have tried everything bar the latter? Thanks!
darkmurder said:
Hey mate I cannot rename mine for some reason, it is checked as in rom in Total Commander and if I try rename it its either access denied or tmail.exe will just revert back straight after, does anyone know how I can remove this from a ROM or make it change its name as I have tried everything bar the latter? Thanks!
Click to expand...
Click to collapse
Okay I managed to resolve my problem, if anybody is wondering how, get Total commander and rename Tmail.exe (even if the file doesn't rename) get the Vijay program (this Tmail didn't work due to not being able to get the name changed) then drag the Vijay program into the Windows folder. From there rename it to tmail.exe (so know you have two) then reset the device. From there then edit the .lnk's and you now have SMS chat for your SMS (and messaging which this program can fix if anybody can change it).
Related
While playing (a bit too much), I must have deleted the password setup icon/file from settings and cannot change or disable the password screen. Anyone knows what the file name is and can post it here or email me the file. I know the password and can get in but I really don't need it and would like to disable it.
The shortcut is exactly like this:
"ctlpnl.exe cplmain.cpl,1"
>> without "" quotes
ezzkht said:
The shortcut is exactly like this:
"ctlpnl.exe cplmain.cpl,1"
>> without "" quotes
Click to expand...
Click to collapse
Thanks ezzkht, but how do I create the shortcut?
Try to copy any shortcut from \windows\start menu\programs\
and paste it to the location you want, rename it & edit it using Total Commander (right-click on it & choose Properties, then go to Shortcut tab and change the TARGET parameter to "ctlpnl.exe cplmain.cpl,1" without quotes.
The icon will automatically change to the password icon
ezzkht said:
Try to copy any shortcut from \windows\start menu\programs\
and paste it to the location you want, rename it & edit it using Total Commander (right-click on it & choose Properties, then go to Shortcut tab and change the TARGET parameter to "ctlpnl.exe cplmain.cpl,1" without quotes.
The icon will automatically change to the password icon
Click to expand...
Click to collapse
Sorry ezzkht, I did exactly what you said but it did not work. Tried with and without quotes, tried 0 instead of 1 but the icon never changes to the password icon just an executable icon but nothing happens when I click on it.
OH yes you are right!! sorry!
Ok here's the shortcut, I just get it from my device..
I opened it with a HEX editor & found the following line inside it:
51#ctlpnl.exe cplmain.cpl,1?\Windows\cplmain.cpl,-6000
plz tell me if it worked with you
Hi ezzkht, I tried but this also does not seem to work.
I checked the registery and their is a mention of a Password.cpl in the Windows directory which is not in mine. I installed logologin and picturepassword and have recently removed them, don't know if they might have also removed this file. It may be the the problem, do you have this file.
Neither me, I don't have password.cpl file in \windows directory!!
I have cplmain.cpl only!
I noticed that the password link points to cplmain.cpl with a parameter of : password.cpl
I guess that cplmain.cpl is a composite file which contains alot of programs, one of them is the password program!
Do u have the cplmain.cpl in windows directory??
check this out:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnppc2k/html/ppc_tcuts2.asp
ezzkht said:
check this out:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnppc2k/html/ppc_tcuts2.asp
Click to expand...
Click to collapse
Thanks ezzkht, this was good but it still did'nt work. I think somewhere their is a file missing. I will try emailing MS and see if they have an answer.
You welcome, but I did nothing!!
A hard reset could help, unless you are not willing to install your programs all over again!
ezzkht said:
You welcome, but I did nothing!!
A hard reset could help, unless you are not willing to install your programs all over again!
Click to expand...
Click to collapse
You got that right, finally got all the programs and the look I want. I am going to do a backup via Activsync and a clone backup tonight at home then if all else fails I will do a HR, copy any missing files from the windows directory and reinstall my backups.
Seems a great idea :wink:
Compare the two WINDOWS directories, and copy only the missing files..
Good luck dude
Hi guys,
I've got an XDAII and I want to be able to see / edit the extended rom...
I've found the cab files I need (elsewhere in this forum) but I have no idea whatsoever how to use them?!?!
I can't run them, so there must be either an app I need or somewhere I need to put them, right?
Please help
Thx
Have you transfeered the cab file to your phone and executed from there?
It's a cab file. You put it on the XDA II in a folder of your choice, then run it, after reboot you will find a new icon in Programs. The rest is simple. :wink:
When I try to run it I get:
The is no application associated with "00unhide". Run the application first, then open this file from within the application.
Click to expand...
Click to collapse
Please post the link to the exact file so I can download and test it.
I just got it working...
After I downloaded the .cab, as I have WinRar I thought that it was something that needed extracting and it didn't!
http://forum.xda-developers.com/download.php?id=567
that's the link anyway, but it works perfectly!
Sorry for being such a idiot
No problem, hope its all sorted for you now.
I am looking to create some cabs (now that I have WinCE figured out) and wondered if others had quick ways of getting all of the reg keys exported for specific applications so I can add those into my cab.
If I can get buttons, today screen prefs, apps, and a few other things done in one compiled "Setup CAB" I will have my phone auto-customized I had it before flashing. I am so close to having only cabs in my UC if I can get this, and do away with the copy commands.
serfboreds said:
I am looking to create some cabs (now that I have WinCE figured out) and wondered if others had quick ways of getting all of the reg keys exported for specific applications so I can add those into my cab.
If I can get buttons, today screen prefs, apps, and a few other things done in one compiled "Setup CAB" I will have my phone auto-customized I had it before flashing. I am so close to having only cabs in my UC if I can get this, and do away with the copy commands.
Click to expand...
Click to collapse
This is actually something I've been wondering about and kinda 'working on'.
I'm trying to find out how certain applications store registration info (registry, files, etc.)
Just a few in question that I'm trying to auto-register on flash:
Resco Tools: Backup and Explorer
Handmark Games (Yahtzee and Scrabble)
serfboreds said:
I am looking to create some cabs (now that I have WinCE figured out) and wondered if others had quick ways of getting all of the reg keys exported for specific applications so I can add those into my cab.
If I can get buttons, today screen prefs, apps, and a few other things done in one compiled "Setup CAB" I will have my phone auto-customized I had it before flashing. I am so close to having only cabs in my UC if I can get this, and do away with the copy commands.
Click to expand...
Click to collapse
It's simple. If you bought WinCE you will then be able to use the option to export and import REG Keys.
So all you would need to do is open a CAB from any program -- Export the REG -- and close it out.
Then open the CAB project you made and import the REG key and your good.
But you must first buy WinCE. The evaluation copy doesn't let you do this. Well it didn't let me.
For cabs that are just changing reg keys for you and not actually installing anything...it's easier to just create an xml file. Name the xml file _setup.xml and use makecab from the command line like this:
Code:
makecab _setup.xml yourcab.cab
CeREgistryEditor also makes cabs from registry files. Free program.
studentjunk said:
CeREgistryEditor also makes cabs from registry files. Free program.
Click to expand...
Click to collapse
The two aspects i was looking for are solved by this program and GC's suggestion. Thanks!
studentjunk said:
CeREgistryEditor also makes cabs from registry files. Free program.
Click to expand...
Click to collapse
So, I need to give a little more explanation for my question.
I am pretty sure that I know how to change registry keys one by one using XML.
I am not sure if it is possible to export everything from a folder in a way that it can be combined with other registry exports and ultimately cabbed. Say I am looking to replace every key in HKLM/Software/Microsoft/Today after a new flash so that certain things are enabled and disabled.
My hope is that I will be able to export the entire "today" in such a way that I can add those to a wince cab. It would be nice to be able to export several of these "folders" at one time and drag them over.
Like I said, I am trying to prevent having to do this one key at a time so that in the future even if I change the setup I don't have to change the strategy for export/import.
So, I need to give a little more explanation for my question.
I am pretty sure that I know how to change registry keys one by one using XML.
I am not sure if it is possible to export everything from a folder in a way that it can be combined with other registry exports and ultimately cabbed. Say I am looking to replace every key in HKLM/Software/Microsoft/Today after a new flash so that certain things are enabled and disabled.
My hope is that I will be able to export the entire "today" in such a way that I can add those to a wince cab. It would be nice to be able to export several of these "folders" at one time and drag them over.
Like I said, I am trying to prevent having to do this one key at a time so that in the future even if I change the setup I don't have to change the strategy for export/import.
Click to expand...
Click to collapse
Read my email and take a look at the registry cab I attached.
gc14 said:
Read my email and take a look at the registry cab I attached.
Click to expand...
Click to collapse
Thanks GC, this is what I needed.
Final XML
Here is my final XML for anyone who cares to share theirs, I learned a lot by looking at GC's (credit where it is due). I put my sdconfig.txt on here too.
Feel free to let me know if there is a better way to do any of this. I will be testing tonight to see how it does after a flash. This should save me 20 minutes of tinkering if everything goes right.
Other than the background not being possible (that seems hard to believe there is no way to do this), I will only have a few things to set up when flashing if all goes well. This will be so worth the hour time it took to create.
Any way to register devices via XML (wifi, bluetooth)?
PS. Though I didn't do it here, I have cabbed the _setup.xml file for installation with UC.
All those CPY commands are still unnecessary. You could make one cab to do all of that very easily.
Also, why do you have LOCK/HIDE commands around the reg cab?
gc14 said:
All those CPY commands are still unnecessary. You could make one cab to do all of that very easily.
Also, why do you have LOCK/HIDE commands around the reg cab?
Click to expand...
Click to collapse
Got those two things cleared up, cabbed the files to copy which works great.
Can't seem to figure two things out:
1. xml didn't install registry keys. Did I miss some setting in WinCE (I just set it as universal, added to files, and set the location to %InstallDir%). I had all of the files I was going to copy in UC in this same created cab as _setup.xml; the copied files went across fine, but no registry keys were changed. This leads me to believe that xml didn't load correctly or at all.
2. Copying folders. I cant seem to copy folders directly into WinCE so I would think that the folder must be created then the files must be copied across. How do you create these folders (I want to copy across AstroGPSLauncher and HTC Home icons to root). I tried using the copy command in UC as well but I think the syntax was wrong by using backslash after folder name in CPY1 and no slash after new folder in CPY2.
Thanks, I am so close to getting this.
Got those two things cleared up, cabbed the files to copy which works great.
Can't seem to figure two things out:
1. xml didn't install registry keys. Did I miss some setting in WinCE (I just set it as universal, added to files, and set the location to %InstallDir%). I had all of the files I was going to copy in UC in this same created cab as _setup.xml; the copied files went across fine, but no registry keys were changed. This leads me to believe that xml didn't load correctly or at all.
2. Copying folders. I cant seem to copy folders directly into WinCE so I would think that the folder must be created then the files must be copied across. How do you create these folders (I want to copy across AstroGPSLauncher and HTC Home icons to root). I tried using the copy command in UC as well but I think the syntax was wrong by using backslash after folder name in CPY1 and no slash after new folder in CPY2.
Thanks, I am so close to getting this.
Click to expand...
Click to collapse
1. You don't use WinCE to create cabs from provxml. You use makecab as I previously stated.
2. Get rid of the CPY commands, don't use them at all. If you want to install youricon.png to root, you just add youricon.png as a file in the cab and set the location to root. Default install directory doesn't matter, you can specify install location for each file separately.
gc14 said:
1. You don't use WinCE to create cabs from provxml. You use makecab as I previously stated.
2. Get rid of the CPY commands, don't use them at all. If you want to install youricon.png to root, you just add youricon.png as a file in the cab and set the location to root. Default install directory doesn't matter, you can specify install location for each file separately.
Click to expand...
Click to collapse
So, makecab worked to create the cab but it states that the installation of the cab was unsuccessful. Here is the zip of the setup file and the cab I created (I kept yourcab.cab naming for fun).
P.S. I got rid of all copy commands, but still can't figure out how to create a new folder on the device using xml or wince. Please explain how I can cab a folder with all its contents, or create a new folder in xml, then UC a cab to install the contents.
That version of WinCE doesn't allow for import of complete folders. Later versions do.
You can also try QuickCab. Don't remember the user's name, but it is being developed by an XDA member. I believe it allows for copying complete folders, and has a simple GUI.
Edit: If you are just looking to do it for AstroGPS it should be fairly easy. Isn't it just one or two files in /AstroGPS... and a shortcut in /windows/start menu/programs? If so, just drag the file (or two) into WinCE, and it will ask you where you want it to be installed. Then just choose /AstroGPSLauncher (you have to create a new folder, but the option is right there).
bedoig said:
That version of WinCE doesn't allow for import of complete folders. Later versions do.
You can also try QuickCab. Don't remember the user's name, but it is being developed by an XDA member. I believe it allows for copying complete folders, and has a simple GUI.
Edit: If you are just looking to do it for AstroGPS it should be fairly easy. Isn't it just one or two files in /AstroGPS... and a shortcut in /windows/start menu/programs?
Click to expand...
Click to collapse
Thanks for looking into the second issue.
Right, but I need to have that in a folder called AstroGPSLauncher on the root. I also am looking to install the HTC Home folder (overwrite the other one). I will get a newer copy of WinCE.
Anyone have any idea why this cab won't install?
serfboreds said:
Other than the background not being possible (that seems hard to believe there is no way to do this)...
Click to expand...
Click to collapse
Are you talking about your Today screen background? You are basically looking to have a certain theme selected? If so, then that is no problem. TSK's are basically just cabs themselves. The Theme selection app in WM just reads the TSK, imports the registry color info, and copies tdywater.gif/.jpg and stwater.gif/.jpg to /windows. At startup, WM reads those image files and assigns them as your Today and Start Menu wallpapers. Just use WinCE to export the contents of the TSK. Then use whatever method you like to update your registry and copy those files to /windows.
serfboreds said:
Any way to register devices via XML (wifi, bluetooth)?
Click to expand...
Click to collapse
I'd like to know this as well. I might look into it, but please let me know if you find a solution. Thanks!
Serf, do you have AIM? If so pm me your sn so we can talk over that. This is a really really simple process, and I know exactly why the cab isn't installing, but it sucks to explain over forums/email.
gc14 said:
Serf, do you have AIM? If so pm me your sn so we can talk over that. This is a really really simple process, but sucks to explain over forums/email.
Click to expand...
Click to collapse
serfboreds7777 and I am online now.
I have this mostly figured out for my needs, a few tweaks and some new ideas since getting things flashed with UC / XML / Cabbed files. If anyone wants to get some help setting up their xml and UC I will do my best to help you through the process.
Props to GC, the man knows his stuff.
All -
Can anyone please help with with remapping the long-press-end-key on my HD2?
I tried various searches on the forum, followed various instructions like Long_end.lnk etc. Nothing worked. I don't want to install a 3rd party app. I would prefer a registry edit, or a cab file install which can help me remap the key to a specific program.
Any help would be greatly appreciated.
PS > Right now the long press of the end key is mapped to the quick menu with 4 options.
These kind of .cabs usually do the same as editing the registry yourself.
Look for Dutty's Task Manager.
dio62000 said:
These kind of .cabs usually do the same as editing the registry yourself.
Look for Dutty's Task Manager.
Click to expand...
Click to collapse
Huh ???
How's the task manager going to help me??
I have been trying to figure this out myself as well.. Would love the long hold end key to map to Slide2Shutdown
govindar77 said:
All -
Can anyone please help with with remapping the long-press-end-key on my HD2?
I tried various searches on the forum, followed various instructions like Long_end.lnk etc. Nothing worked. I don't want to install a 3rd party app. I would prefer a registry edit, or a cab file install which can help me remap the key to a specific program.
Any help would be greatly appreciated.
PS > Right now the long press of the end key is mapped to the quick menu with 4 options.
Click to expand...
Click to collapse
Create a shortcut to the .exe you want to run. Rename it to 'EndKeyLNK' and copy it and the extracted 'EndKey.exe' attached below to the windows folder. Now long pressing end key will launch the exe. I did not create this i found it though i cant remember who did create it.
I use it to launch xdashutdown with no problems
optiknerv said:
Create a shortcut to the .exe you want to run. Rename it to 'EndKeyLNK' and copy it and the extracted 'EndKey.exe' attached below to the windows folder. Now long pressing end key will launch the exe. I did not create this i found it though i cant remember who did create it.
I use it to launch xdashutdown with no problems
Click to expand...
Click to collapse
Thanks buddy ... that was awesome ...
However, After doing that, when I press Long_end button, it tells me that the app cannot be run as it is unsigned or a component cannot be found. Weird.
How did you overcome that error with XDAShutdown app. I'm trying to use the Slide2Shutdown app.
Thanks
govindar77 said:
Thanks buddy ... that was awesome ...
However, After doing that, when I press Long_end button, it tells me that the app cannot be run as it is unsigned or a component cannot be found. Weird.
How did you overcome that error with XDAShutdown app. I'm trying to use the Slide2Shutdown app.
Thanks
Click to expand...
Click to collapse
i had no problem at all with xda shutdown. Check that the shortcut you created is renamed properly and that it indeed works by manually clicking on it.
It needs to be EndKeyLNK.lnk
optiknerv said:
... I did not create this i found it though i cant remember who did create it.
Click to expand...
Click to collapse
hi, its vjay555 who made this cute piece of software. the program is called vjbrisk.
works perfect thank you for the tip.
mad
Did you get it working Govindar77 ?
I just instaled it and it works great with xdasutdown too!!!!
nice
just remember to backup the original EndKey file
Thanks
All who helped and replied to this thread -
Thanks a bundle guys. I was able to get it working.
Made a cab, which can be installed, and pulls up Slide2Shutdown on long-press-end key.
Awesome .... me so happy ..
Anyone need the cab, just holla here, and I'll post it.
hello,iam trying to give a second option to the hardware key i dont know how to do it, i just install the cab endkey.exe but iam lost , can you orient me ?
I found this thread as I was going to try to get my old X1's Smaberg's actionscreen working with the off button (worked fine with the HD and the X1, not the HD2), then I found he'd got it working already.
It may be of interest to some of you, more options than xdashutdown.
ADDED ACTIONSCREEN FOR HD2/LEO Ver. 1.2 with data disconnect
vrgolin said:
hello,iam trying to give a second option to the hardware key i dont know how to do it, i just install the cab endkey.exe but iam lost , can you orient me ?
Click to expand...
Click to collapse
Hey buddy,
If you're still interested - basically what you gotta do is copy the endkey.exe to the Windows folder, and then create a shortcut of the program, and rename it as endkeylnk.lnk and copy that to the Windows folder as well.
I just integrated all the steps and made a cab file (I also happen to have the exe file for Slide2Shutdown). So nothing needs to be done manually. Just install the cab, and voila ... long-press-end-key runs the Slide2Shutdown program.
grayme said:
I found this thread as I was going to try to get my old X1's Smaberg's actionscreen working with the off button (worked fine with the HD and the X1, not the HD2), then I found he'd got it working already.
It may be of interest to some of you, more options than xdashutdown.
ADDED ACTIONSCREEN FOR HD2/LEO Ver. 1.2 with data disconnect
Click to expand...
Click to collapse
Too many choices, buddy. I tried it and went away from it. I also have cabs for the BT toggle, Lock Device, Send Rec All, etc. So I just install the ones I need.
govindar77 said:
All who helped and replied to this thread -
Thanks a bundle guys. I was able to get it working.
Made a cab, which can be installed, and pulls up Slide2Shutdown on long-press-end key.
Awesome .... me so happy ..
Anyone need the cab, just holla here, and I'll post it.
Click to expand...
Click to collapse
Please do post the cab...
optiknerv said:
Create a shortcut to the .exe you want to run. Rename it to 'EndKeyLNK' and copy it and the extracted 'EndKey.exe' attached below to the windows folder. Now long pressing end key will launch the exe. I did not create this i found it though i cant remember who did create it.
I use it to launch xdashutdown with no problems
Click to expand...
Click to collapse
Great!! I was looking for something like this a while ago. Didn't found anything so I created my own work-around. I came up with this. Although the above solution is more simple, my solution has the advantage that you can add mortscript code in it.
Just copy the new exe over
Thanks to the contributions to this thread I was able to change the long press end key behavior...
Only I was so lazy that I didn't want to create a shortcut file and copy further files. So I only copied the original exe over the EndKey.exe using Total Commander.
And it worked immediately without soft-reset.
Given the old file is in ROM I suspect I just have to delete the copy to recover the previous one!
Thanks again because I tried the long_end.lnk and the registry 40C7 key modifications without any success.
Can you help me!! Set Long_Endkey for Smartlock (Lockscreen)! thank you!! plz!
anhphe076 said:
Can you help me!! Set Long_Endkey for Smartlock (Lockscreen)! thank you!! plz!
Click to expand...
Click to collapse
Follow the instructions in post number 5. to create a shortcut (incase you didn't know) you long press on a file and then copy and at the destination long press in empty space and then paste shortcut. You need to find the .exe or link that launches smart lock. Create a shortcut to it and rename this shortcut to EndKeyLNK and copy it and the file contained in the zip attached to post #5 into the windows directory
I want to edit my waiting cursor,using Resco,I tried several times to
copy shellres.192.dll from HD2\Windows\ to stoeage card,but all my
efforts was in vain, system deniede me.Can anyone help me? By the way,
I can use Resco to copy another shellres.192.dll to overwrite the
original one! Thanks!
you could try ROM Extractor, maybe it'll work
p107r0 said:
you could try ROM Extractor, maybe it'll work
Click to expand...
Click to collapse
Thank you a lot! Using ROMExtractor, I have another "shellres.192.dll" on my
storage card!
But another question:My purpose is to use ResourceHacker to chang BMP for
waiting cursor which is hidden in "shellres.192.dll". But when I Extract
"shellres.192.dll" from \windows\ to \Storage Card\, then I just copy it back to
windows,(didn't do anything else),I find the "Setting" panel has been
changed,the three sub-panels: Personal,system,connections, missed!
I don't know why. Please help me,if can. Thanks!!!
rather than just copy it back into windows, make the file into a cab that installs it to windows. just copying files over rom files doesn't usually work.
samsamuel said:
rather than just copy it back into windows, make the file into a cab that installs it to windows. just copying files over rom files doesn't usually work.
Click to expand...
Click to collapse
Thanks for the instruction! I use WinCE CAB Manager3.0 to make a cab named VagrantMan Wait Cursor.cab.
It shows the same result: the Wait Cursor works well, but I find the "Setting" panel has been
changed,the three sub-panels: Personal,system,connections, missed!
Are you kind enough to check my cab? Is there anything wrong?