Related
Hi guys,
Hi,
I'm a hp rw6828 user and is very much enthusiast to try out those wm6 roms made by those experts. However, i did a mistake while trying to flash.
I tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode by pressing both "_" and soft reset. That didnt work. I tried another way by taking out the batt, leave it for a 10mins, press both "_" and soft reset, put in batt, release soft reset then "_" keys. That didn't work either.
But, just lately, i've tried taking out batt, holding the camera key and softreset, place back batt, release soft reset n camera button. This method works and i get what it seems to be an atom bootloader?
i get a black background with "MN1 Bootloader Mar 29 2006 13;52;14 copyright..... 1) debug module through UART 2) jump to DM Enter your selection.
I've searched the forums and found few ways to downgrade back to wm5 but those aren't the same conditions with what im facing. Can someone recommend how can i downgrade back to wm5 with the conditions that im facing? All you help is much appreciated. THank you.
You are lucky , at lease your device now become atom. My was totally cannot on power and just vibrate. Till I have to sent it back to HP SC and change the main board . Can you understand chinese , if yes than I have a solution you may try . Else you have to wait . I just download a program and doing some testing , the program is in chinese language .
Thx for you reply. I guess u can say that. I'm from msia but cant read chinese.
Is it possible to solve the problem by sending back to hp using warranty claim? I think i still have warranty left but its ending very soon. One more week i think.
elus said:
Thx for you reply. I guess u can say that. I'm from msia but cant read chinese.
Is it possible to solve the problem by sending back to hp using warranty claim? I think i still have warranty left but its ending very soon. One more week i think.
Click to expand...
Click to collapse
I don't think you still can claim under warranty unless you can make your phone total can't on and access to windows mobile. Last time I sent it back they charge me RM 385 to change the main board . I did talk to their technical personal , it seen like they don't know what is bootloader and flash it back to original rom . What they do was just change the main board with preloaded program .
Good luck
If you think that you can claim you warranty , than you just go a head . If not , may be you can access my thread "HP6828 WM6" , download any one of the rom that I post , follow the instruction accept downgrade bootloader . Enter your phone in bootloader mode . If you can start the process , than it will flash a new hp bootloader into your phone .
Against . Good luck
Cheers
I'm from malaysia also.
Ok. I'll try your method to restore the bootloader. Thx for the fast reply. I'll keep u update with the progress. Thx again.
elus said:
Ok. I'll try your method to restore the bootloader. Thx for the fast reply. I'll keep u update with the progress. Thx again.
Click to expand...
Click to collapse
You've flash ATOM Bootloader, there are many ways to restore to HP Bootloader ... don't worry !!!
nhocbanme said:
You've flash ATOM Bootloader, there are many ways to restore to HP Bootloader ... don't worry !!!
Click to expand...
Click to collapse
Can share the information how to restore back the HP original bootloader ? And the procedure . Thanks
First you must have HP bootloader file (Eboot.nb0) 1.01 or 1.05 are OK.
- Use DRUU to restore Bootloader : replace ATOM bootloader file with HP bootloader file
- Use miniSD to restore Bootloader : copy Eboot.nb0 to miniSD card, go to bootloader ... wait 1' it will auto hard reset.
After flash successfull remmember remove Eboot.nb0 from miniSD.
- Reflashing Bootloader using JTAG. (Use only when can't use two above menthods)
HP Bootloader 1.01 : http://rapidshare.com/files/82853862/HP_BL1.0.1.rar
HP Bootloader 1.05 : http://rapidshare.com/files/82853924/HP_BL1.0.5.rar
nhocbanme could you please specify which specfic DRUU should be use for your method? Thank you.
You should use DRUU of Chartreux, replace Eboot.nb0 and choose OS and Eboot
Remember copy a HP68xx ROM (diskimage_Ver.nb0) to C:\Windows\Temp with DRUU of Chartreux then start...
nhocbanme, you explanation seems vague to me. Probably cause im still new. Could you please give a clearer instructions? Thank you
elus said:
nhocbanme, you explanation seems vague to me. Probably cause im still new. Could you please give a clearer instructions? Thank you
Click to expand...
Click to collapse
-You must extract RUU in C:\Windows\Temp (no sub folder) then replace Eboot.nb0 with Hp bootloader 1.01/1.05
-Copy a diskimage_Ver.nb0 (any ROM WM6 for HP 68xx) to C:\Windows\Temp
-Run the DRUU program and choose OS and Eboot and start.
Goodluck !!!
It worked! Thx a lot nhocbanme and wantat. The methods restore the atom bootloader to hp bootloader. The DSUU by chartreux is a good tool.
Now, i would like to put this solution up into the wiki. How may i do so? Thank you.
hi, im william from M'sia. i like to know how you recover your previous installed AtomROm back to WM5.
can u provide some step to step detail
if possible upload some files can let me flash from memory card in the bootloader screen
ur reply are highly appreciated
thx ~~
williamSun said:
hi, im william from M'sia. i like to know how you recover your previous installed AtomROm back to WM5.
can u provide some step to step detail
if possible upload some files can let me flash from memory card in the bootloader screen
ur reply are highly appreciated
thx ~~
Click to expand...
Click to collapse
OK, please read my topic, I'll post a WM5 ROM flash via miniSD
help !!
im facing another problem again...
this time i changed the file extension EBOOT0502_MNT_01.01.03.nbf to EBOOT0502_MNT_01.01.03.nb0
(file from HP official WM5 SP34074, inside the installed folder )
and copy to memory card and put in 6828 then started to go bootloader screen
few minutes later my screen goes blank, and i tried with the revive methods
which is
-press the 2 softkey " - " and reset button
-put in the battery ,
-release reset, then release softkey
but didt work out!!!!no repsponse at all..tried many times..possible dead ad???
plz help me abit ..big troblem!
I dont think i can help u much here as im still new. From the looks of your problem, i guess u forgotten to cut the first 12bits (or something like that) of your bootloader when u use it to flash via mini sd. Maybe you can try the JTAG method mentioned in the atom wiki to restore your bootloader. Good luck.
Thanks guys!
The same exact thing happened to me yesterday..I was already about to sell my ipaq as a dead unit and i came upon this thread and after following the steps it did made ipaq alive again..
thank you very much guys,i hope you continue to help more people..
god bless and best of luck to you
more power xda-dev!
!!! WARNING !!!
USE IT ON YOUR OWN RISK!
theoretically, My upgrade method would not brisk your device,because it would not touch your boot loader or radio.
but there is no guarantee.
many thanks to bepe and ferryboat and the people who make the cooking tools!
info:OS 5.2.19199 (Build 19199.1.0.0)
.NET CF Framework 3_5
ArcsoftMMS 4_2_8_1
6MB Pagepool
the rest stuff is the same as offical rom(because I have not so much time to cook it, sorry!)
Here is the upgrade procedure,.
1.format the sd CARD(should not be more than 2g) use FAT 16 and copy the al1.dio to your mini sd card.
(the mini sd card should not contain any other files except al1.dio)
2.Enter BootLoader menu (by pressing "Record button + Reset button")
3.wait for the percentage number to be 100% and then it will reboot automatic
because the xip space is not enough, so I have delete the first bootsplash screen,So if you soft-reset,then you would not see the first screen, Instand,you will see something else, you will know that time.
It's normal and just a moment it will pass to second bootsplash screen.
the only bug I know right now is if you soft-reset the device by pressing the Reset button,then your recent sms and phone record (not the ones exited long time age) may lose.
The best solution is that use software to soft-reset,in that way,you would not lose any sms or phone record.
and I find out that if the message box contain more than 100 sms,then press the Reset button to soft-reset device would not make your sms lost.
Sorry for my poor english,and IF YOU DO NOT UNDERSTAND THE upgrade procedure, JUST ASK BEFORE YOU USE IT!
ENJOY THE NEW ROM!!!and I hope someone can cook it ,make it to be the best rom ever!
To download ROM
http://www.fs2you.com/files/f5ff9578-d3ef-11dc-86fe-0014221b798a/
THANKS TO Lann_78 FOR THESE LINKS:
MEGAUPLOAD Link
http://www.megaupload.com/?d=822ZBUD9
Rapidshare Link
http://rapidshare.com/files/89790939/al1.DIO.html
seems i'm gonna be the first to D/L m8.... thx a ton
gonna try it though after 7th as need my PPC in the present condition till then after that its trial time [email protected]!
thx again and TC
keep up this gr8 work m8...
will post my response soon ;-)
m8 could you kindly post some screen shots till then ...
i just cannot wait to see WM6.1 in action....
Please...
thx and TC
oops sorry m8 just saw that you have added the screenies...
thx ;-)
last time I did sd update end up with brick my ATOM Hope this times will not BTW thank you so much for sharing
slum44 said:
last time I did sd update end up with brick my ATOM Hope this times will not BTW thank you so much for sharing
Click to expand...
Click to collapse
This rom is only an os part.It can not brick your phone. I have used this rom for a few days,I think it excellent.
Thank qq108108108 share it to us.
yfdid said:
This rom is only an os part.It can not brick your phone. I have used this rom for a few days,I think it excellent.
Thank qq108108108 share it to us.
Click to expand...
Click to collapse
I agree,I have use this method to flash my device for many hundreds time,So I think it's quite safe!
I have try to access the bootloader using
2.Enter BootLoader menu (by pressing "Record button + Reset button")
But doesn't work for me, anyone can advice? IPL V 0.8
afterlife said:
I have try to access the bootloader using
2.Enter BootLoader menu (by pressing "Record button + Reset button")
But doesn't work for me, anyone can advice? IPL V 0.8
Click to expand...
Click to collapse
Press both button, then release the reset button first,.... followed by the record button.... it worked for me...
What to select? And how to select them? I try all buttons none is working. Please advice. tks
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
afterlife said:
What to select? And how to select them? I try all buttons none is working. Please advice. tks
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
Click to expand...
Click to collapse
Here...
Here is the upgrade procedure,.
1.format the sd CARD use FAT and copy the al1.dio to your mini sd card.
(the mini sd card should not contain any other files except al1.dio)
2.Enter BootLoader menu (by pressing "Record button + Reset button")
3.wait for the percentage number to be 100% and then it will reboot automatic
Meaning, u got to have a blank mini sd card with just the al1.dio in it.
Once u go to bootloader mode, it will automatically load that file and restart....... to wm6.1
When i press the Record + Reset (On - Off button on top of the device) it will just give me a screen "Goodbye" then it will just shut down.
But if i access the above it gives me Mini-SD DETECTED but nothing happens.
I have formatted my SD card on my PC with FAT 32 and only tat file is inside.
afterlife said:
When i press the Record + Reset (On - Off button on top of the device) it will just give me a screen "Goodbye" then it will just shut down.
But if i access the above it gives me Mini-SD DETECTED but nothing happens.
I have formatted my SD card on my PC with FAT 32 and only tat file is inside.
Click to expand...
Click to collapse
Reset button is the tiny hole below where u have to poke using the stylus.
When press record + reset (tiny hole), same just go into the Al1 640K EBOOT screen.
Do u think it's my SD Card problem? I'm using 2GB Kingston...
release the reset button first,.... then followed by the record button...
wonder how u got to this before..
((Originally Posted by afterlife
What to select? And how to select them? I try all buttons none is working. Please advice. tks
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART ))
once it comes out to this, it will read the sd card..
I can access to this page but will just stuck there... nothing will happen... I'm using Vista to format my Mini SD Card, to FAT32
yfdid said:
This rom is only an os part.It can not brick your phone. I have used this rom for a few days,I think it excellent.
Thank qq108108108 share it to us.
Click to expand...
Click to collapse
excellent work both of freak and yfdid
afterlife said:
I can access to this page but will just stuck there... nothing will happen... I'm using Vista to format my Mini SD Card, to FAT32
Click to expand...
Click to collapse
Oh.... then i don know wat else..... sorry
Tks anyway... I guess i will need to wait for other method to flash the new rom
qq108108108 said:
!!! WARNING !!!
USE IT ON YOUR OWN RISK!
theoretically, My upgrade method would not brisk your device,because it would not touch your boot loader or radio.
but there is no guarantee.
many thanks to bepe and ferryboat and the people who make the cooking tools!
info:OS 5.2.19199 (Build 19199.1.0.0)
.NET CF Framework 3_5
ArcsoftMMS 4_2_8_1
6MB Pagepool
the rest stuff is the same as offical rom(because I have not so much time to cook it, sorry!)
Here is the upgrade procedure,.
1.format the sd CARD use FAT and copy the al1.dio to your mini sd card.
(the mini sd card should not contain any other files except al1.dio)
2.Enter BootLoader menu (by pressing "Record button + Reset button")
3.wait for the percentage number to be 100% and then it will reboot automatic
because the xip space is not enough, so I have delete the first bootsplash screen,So if you soft-reset,then you would not see the first screen, Instand,you will see something else, you will know that time.
It's normal and just a moment it will pass to second bootsplash screen.
the only bug I know right now is if you soft-reset the device by pressing the Reset button,then your recent sms and phone record (not the ones exited long time age) may lose.
The best solution is that use software to soft-reset,in that way,you would not lose any sms or phone record.
and I find out that if the message box contain more than 100 sms,then press the Reset button to soft-reset device would not make your sms lost.
Sorry for my poor english,and IF YOU DO NOT UNDERSTAND THE upgrade procedure, JUST ASK BEFORE YOU USE IT!
ENJOY THE NEW ROM!!!and I hope someone can cook it ,make it to be the best rom ever!
To download ROM
http://www.fs2you.com/files/f5ff9578-d3ef-11dc-86fe-0014221b798a/
Click to expand...
Click to collapse
Is the Interface for WM6.1 supposed to be that way?
Cos I saw the so called "leaked" interface of the WM6.1 is so different.
got a niki200, what was flashed badly by someone, and he said, the flash was stopped at 9x%... now the device swithes on only at bootloader scree, what is:
------------------------
NIKI200
SPL-1.21.0000
CPLD-4
Upgrade ROM code error
Please try again
------------------------
I can't upgrade with any RUU, all of them stops at 0% and reports that device needs recovery.... after recovery steps, problem still persist.
If I use "factory" RUU with any carriers rom RUU reports bad vendor ID after 1% (I think it's becouse the person who tried to flash before me doesn't made CID unlock first).
Anyone knows how to repair this problem? Device was originally TMO-HU branded.
Thanx
used mtty to send command "boot", command runs, but device remains in bootloader screen... anyone can help me?
maybe device is German TMO branded originally, not TMO-HU one
after talking to the person, who has bricked the device, it turns out, that he forgot to hardspl the bootloader, so now the original 1.21.0000 is still in the device, and he has flashed with some pathed radio rom for supercid unlocking (without hardspl first)... is there any way to flash back some working radio rom and unbrick it? Device doesn't accept radio rom flashing , but I will try with all the available versions, maybe some of them will work...
gyuszko - you phone is locked, so the only way - flash original rom.
For example. My niki have come from Thailand, but i use it in China. Once, i have bricked it, and the only way that have helped me - flashing original Thailand rom
(It works fine on unbranded phones, but i think branded can be unbricked by same way )
thanx for your answer, I searched a lot, but haven't forund original rom for it... even registered at htc-club and entered device's serial, but no luck, no sw update for this device
What is original sn of you rom?
There is one branded (SignTel) rom:
ROM version: 1.31.871.14
ROM date: 11/29//07
Radio version: 1.58.16.27
Protocol version: 25.61.30.03H
P.S. Did you ask TMO-HU about it?
s/n: HT818Gxxxxxx
yes, TMO-HU branded
I mean what version of rom is yours original, not sn of device
And did you ask operators service for rom?
I don't know the original version, 'coz someone else bricked the device...
Try this one http://rapidshare.com/files/1522292...14_Radio_Nike_1.58.16.27_signed_Ship.zip.html
It's not T-mobile, but is branded WWE
hi gyuszko,
if understud, we have the same problem.
surfing on this forum, i've read it:
Elf SD Card flashing
This page describes how to upgrade your Elf ROM using an SD Card. This is useful for:
Linux and Mac users: you don't need windows to upgrade the ROM
ELF0IMG.nbh on a FAT32 filesystem
Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work).
Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
Rename the .NBH file to ELF0IMG.nbh and copy it to the root folder of your microSD card.
With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by hold down the camera button and reset device with the stylus).
confirm flashing on screen by pressing the power button (or the volume slider down).
Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
SuperCID devices are able to flash any NBH image using this method.
Click to expand...
Click to collapse
now, i've try on my touch dual (niki100), bat i don't know how i mast to nomine the rom file for our smartphone....
have you any idea?
Festermax.
Szia!
Lesz megoldásom 1-2nap múlva :-d
Írok majd
sőt adok linket
red6 said:
Szia!
Lesz megoldásom 1-2nap múlva :-d
Írok majd
sőt adok linket
Click to expand...
Click to collapse
SZia,
engem is érdekelne, mert próbálkoztam update-lni, de...error van.
Szia! H!
Sok sikert!
http://rapidshare.com/files/272691817/NikiT07.rar.html
Niki200
T-mobile HU
Original Rom
http://rapidshare.com/files/272691817/NikiT07.rar.html
Tutti hogy Niki 200-on nem megy a Niki100-as törés!
De ezzel legalább vissza lehet állítani!
Ha valakinek van valami megoldása a Niki 20-hoz, az írjon.
This supercid crack wont run on the Niki 200, but it will only run on the Niki 100.
But its a sure thing to recover it.
If anyone has any solution for the Niki 200 supoercid crack, please om me.
Hello did somebody know from where i can download original WM 6 or 6.1 ROM for HP IPAQrw6815-not modified?
thanks
Teodor
[email protected]
hp doesn't come out with WM6 or WM6.1 for ipaq 6815.... there's only custom roms which are modified to work with ipaq 6815... you can choose from a variety of them in here.... have fun!...
thaks for this
Help with My ipaq 6815
Nhocbanme hi,
i've read thru many of the replies in this forum. i'm a newbie and don't knw much abt roms. i tried upgrading or if u call it flashing my ipaq via PC and later SD. the PC flash did not work. i had to wait almost the whole day becos it said it was reading configuration from the phone. i later tried the flash via a transcend 1GB miniSD and till today the phone has gone off. i tried to power it on even with th e battery fully charged. my sis has the same phone i tried swapping batteries but it still didn't come on. i really need to upgrade to windows mobile 6.1 i formerly had WM 5.0, today itried again and it still stays on the boot screen.(white background with the HP logo and the Pbl 1.05 at the botton of the screen .
please i need help ASAP.
Downlgrade your bootloader to 1.01
Hi,
You have to downgrade your bootloader from 1.05 to 1.01. Find in the following the instructions how to do it. I did it and it's working.
Be careful when you do downgrade, because you can end up without phone
Quote:
How to flash from PC with Windows XP (It is ok to run it in vmware)
Thanks Knave and rcperez for posting their detailed experience so I can write this section. Also thanks jimmyspa for improving the addheader's performance greatly.
1. Check your Boat loader version
(do a soft reset, and check the value printed at the bottom during the HP logo screen)
2. If you noticed that the last line states BL 1.00.05, it means you have boat loader 1.05 installed. You will need to download and flash your phone back to 1.01 via ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34053.exe (VERY DANGEROUS, FLASHING VIA SD IS MUCH SAFER!)
3. After successfully downgraded your phone's boatloader, or your version was already v1.01, you can proceed to flash your phone to the rom.
With the check done, proceed with the required files.
1. Go to download section to download the rom file. -- The rom that you downloaded, e.g (diskimg.nbo)
2. Download the file pcupdate.zip attached in this thread and unzip the contents to the same folder you used in step 1.
3. Download the latest Rom file and extract to the same folder
4. Run BuffereAddHeader.bat. It will take seconds to generate a diskimage_Ver.nb0. (You should have Java Runtime > 1.50 installed, http://www.java.com/en/download/manual.jsp)
5. Move your phone to boatloader mode ( press the two - keys, follow by a poke at the soft reset hole with your stylus )
6. Connect the phone to the PC
7. Execute the Device Utility Update program and wait till it verifies the state. Click on Update Item "All" use cursor keys to change it to "OS ONLY" then hit next **** SELECT "OS ONLY", if you cant change it to "OS ONLY" DONT PROCEED!!! It should detect your device as Model 0 etc.
8. Press Next to begin flashing.
9. Once completed, the phone will reset by itself. Wait for a while for it to startup.
REMEMBER SELECT OS ONLY BY PRESSING DOWN IN THE SELECTION BOX
Here are the notes & files provided by hochengsoon with README for flashing via Windows XP
PC flashing using BL1.0.1 must be done from C:\Windows\Temp, so why not start everthing from this folder ie PCUpdate + ROM + missing file(s).
PCUpdate1.rar - http://www.mediafire.com/file/k5jumzzg1mm/PCUpdate1.rar
How to downgrade to WM5 using PC
1. download wm5 rom from http://h20000.www2.hp.com/bizsupport...pappid=NextGen
2. run it and after entering the updating screen cancel it.
3. replace the hpRUU.exe in c:\IPAQ(default install) with the attached file hpRUU.exe in archive hpRUU.zip
4. Connect device to PC, then press and hold two "-" button and reset.
5. Run hpRUU.exe and do a normal update.
Note: you may delete eboot*.nbf to prevent bricking the device.
bootloader missing
well i m using HP rw 6815, n last night i had flashed a 6.5 rom , later i was unsatisfied with tat rom,
so i went 2 change it, n during tat process, my phone turned off, n now it doesnt switch on, 1ce i managed 2 go 2 boot screen thr i cud see hp logo n bl-0.0.0 can ne1 help me out with it, how do i put bootloader in phone.. neither my pc detects the phone... help appriciated
HI i had same problem on hp rw6815
No bootloade aparantly but bootloader hp logo loaded but insted o o.0.o i had a ff.ff.ff bootloader. i dunno what that meant. i inserted a eboot.nb0 on sd reseted in bl (v1.0.5 from this forum).... bootloader updated oki.. but my phone transformed in a hp rw6828, and i can install 6828 rom working and bootin fine in rw6815, the rw6815 rom install via sd but restarts on boot screenn .. this appeard when i tried a downgrade from wm6.5 to wm5 when i try to upgrade via hpruu it looks tat i have a no language hpipaq model.. My model info is "€ R 0 6 0 8 2 2 N _ M N 1 A R C _ R S 0 0 0 5 2" i dont know how to interpret this file sysyinfo.txt with that data. my question is how can i downgrade to wm5 and original bl of hp rw6815? i have all files in nbf form. The onli soluton to the problem if ur phone restarts after rom upgrade downgrade on witn wm 6.5 an 1.01 bl is the atrached rom.. workin 6815-camera-patched-R3.zip is the only rom... located here http://forum.xda-developers.com/showthread.php?t=360664 second post under orher roms
6815 camera patch may work version r2: http://www.mediafire.com/?lihy0vcvnxd
6815 camera patched version R3: http://www.mediafire.com/?2mjhtgjox0x
This roms get ur phone alive after this bug... or the restar bug... they work with both 1.0.1 bl and 1.0.5 bl more stable with 1.0.1... and i thing the developer of the rom did not change the indentifier of the rw6828 rof for 6815... i think it;s hybrid rom between... it works.
Plese help me to downgrade to original state... hp rw6815 bl 1.0.5 rom wm5. or help me solve the hpruu problem... not patched for model and lang beacouse it says the same incopatible thing.. the picture is the same result in patched and original ruu.. .
me too
i got that same problem i dont know wahta to do help guys
bootloader missing after Upgrading to wm 6.5
Hi Dear, i had the same problem but the solution is so funny.
1. Remove Battery from your mobile.
2. Remove SIM card too.
3. Wait around 5 min. & put them back again.
4. Everything should be OK
I hope Problem solve like me , But realy i don't know why ??? .
Best regards, Jalal
I tried to flash the 6815 is here and I have put my diskimg.nb0 on 2gb memory card. Press the 2 buttons with the "-" and give it to reset with a stick ... I get into the bootloader and returns to the screen while windows. It might be because the bootloader has the pda is 1.0.5??
The problem is that trying to change the bootloader 1.0.1 is here and not working because my pda is Spanish.
How can I reduce it?
Dear SHKUMBIN,
I am very grateful for the clear and beautiful explanation, which indicates that a great effort and considerable experience and also " NHOCBANME " and " ARIEY " for the great job they do to bring those custom rom's.
Accept my greetings.
karamzak
I have flashed my x7500 before using the Athena_WM6_TMUK_2.35.110.4 rom and that worked. Bootloader said spl v1.0 so I tried the authenaunlocker which said it worked and from then the bootloader said spl 1.2 olipro
I then thought I could update to AGB v3.0 , it seemed like it worked but when it rebooted, it shows some mad pixels like a corrupt image and then seems to boot but with a black screen. I can hear it do the ping it does when it asks to calibrate the screen but it is entirely black :-(
I have tried an sd card method of loading a new rom but it always fails after a few seconds with red numbers 68002 and then goes back to the tri color boot loader.
I tried ultravanilla rom renamed to ATHEIMG.nbh in the sd card (formatted to fat32) and that does the same thing with the red numbers.
have I completely bricked it?
I should say that I'm on Windows 7 and I've tried the MAC change fix but the mtty app doesn't give me a usb port to select, just com1 and com2
I tried the windows exectuable for updating the rom but it always fails with error 244 invalid model id.
here's the images I see
[edit] hurray! the mtty thing worked after I found an old laptop that had xp on it to use, as soon as I had that I downloaded activesync , unchecked allow usb connections and fired up mtty, that had an entry for usb and then I just followed the instructions and was able to change the id, after that, I was able to use the windows exe rom update. I'm now back to where I'm started and have donated to cmonex!
hi i have the same problem with my t-mobile ameo.
the tri-screen even shows the same digits as yours.
did you manage to get a fix for it. or is it totally bricked
If you can enter the bootloader (tricolor screen) it should be possible to reactivate your Ameo. I have flashed my Ameo with wrong SPL ROM too (because it was labled as SPL 1.2 but is SPL 3.5).
If you don't have a WinXP system on your hand, try to flash with SD-card. You need a FAT32 MiniSD card (not SDHC!) or FAT32 MicroSD with MiniSD adaptor.
Format the card and copy the ROM file (for the right SPL!) to it, rename the file from RUU_Signed.nbh to ATHEIMG.nbh. Then go to the bootloader and the Ameo should be ready to flash the new ROM.
If you have a WinXP system you can try to enter the bootloader (remove the MiniSD card before) and then connect your USB cable. The bootloader should change from "Serial" to "USB" and should be ready to flash a new rom.
If your Ameo is fractious you can find some good tutorials here.
Purzelkater said:
If you can enter the bootloader (tricolor screen) it should be possible to reactivate your Ameo. I have flashed my Ameo with wrong SPL ROM too (because it was labled as SPL 1.2 but is SPL 3.5).
If you don't have a WinXP system on your hand, try to flash with SD-card. You need a FAT32 MiniSD card (not SDHC!) or FAT32 MicroSD with MiniSD adaptor.
Format the card and copy the ROM file (for the right SPL!) to it, rename the file from RUU_Signed.nbh to ATHEIMG.nbh. Then go to the bootloader and the Ameo should be ready to flash the new ROM.
If you have a WinXP system you can try to enter the bootloader (remove the MiniSD card before) and then connect your USB cable. The bootloader should change from "Serial" to "USB" and should be ready to flash a new rom.
If your Ameo is fractious you can find some good tutorials here.
Click to expand...
Click to collapse
hi I have the same problem this guy had, I have one question what rom should I use ? can you give me a link please
Purzelkater said:
If you can enter the bootloader (tricolor screen) it should be possible to reactivate your Ameo. I have flashed my Ameo with wrong SPL ROM too (because it was labled as SPL 1.2 but is SPL 3.5).
If you don't have a WinXP system on your hand, try to flash with SD-card. You need a FAT32 MiniSD card (not SDHC!) or FAT32 MicroSD with MiniSD adaptor.
Format the card and copy the ROM file (for the right SPL!) to it, rename the file from RUU_Signed.nbh to ATHEIMG.nbh. Then go to the bootloader and the Ameo should be ready to flash the new ROM.
If you have a WinXP system you can try to enter the bootloader (remove the MiniSD card before) and then connect your USB cable. The bootloader should change from "Serial" to "USB" and should be ready to flash a new rom.
If your Ameo is fractious you can find some good tutorials here.
Click to expand...
Click to collapse
it is not working...
keep your cool
the most important thing is to keep your cool, I've been in trouble before and managed to sucsses, first of all if you are able to go into bootloader you're fine, it seems to mi you flashed wrong spl, the AGB v3.00 is for spl 3.5 only and for what I understand you have spl 1.2, also i my experience you should work with win xp, i have my laptop with 2 os xp and 7, just to do rom loading on my 3 advantages, so if you are able to put your athena in bootloader plug it to your pc your athena sould change from serial to usb, if you can manage that you are almost done, now all you have to do is flash a compatible rom spl 1.2, if you still want agb v.3 you need spl 3.5 and the only way to achive that is to flash athena projet 4 rom, only when that is acomplished you would be able to load an spl 3.5 rom. I hope this help, keep us posted.
hi i have a pc on windows xp sp3 with htc 4.5 it does not pick up my phone bit it will try to load the windows 6 advantage rom,but after it reaches 2 percent ,the phone resets.i have done the same thing as above,i tried to flach a michy 3.5 rom over windows 6 on 1.25,i can get into bootloader but everytime i flash my phone resets.my mini drive is formatted,so could the problem be with the onboard sd card? if so in plain english could someone take me thru it step by step on hpw to access and format that,to see if it makes a difference,many thanks,and a nice contribution to anyone who can help me,and please if you start talking about hot keys,please state which ones,as every key is a hotkey many thanks curzie,if anyone ever needs pc or laptop advice pm me thanks
Who reflash device with this trouble ???
Working - or not ???
flash rom problem
hi, I'm in the same situation and sorry for my English, I have a X7500 I unlocked the radio, and then I installed the 3.0 rom agb all went well, but on the first reboot the system does not start, black screen, if I press the volume button turns on but displays the volume and the touch does not work, I can not make it go into bootloader because it turns on and remains on the flag!
Can you help me?
thanks
Solved
Check out my post http://forum.xda-developers.com/showthread.php?t=2172291