No, it does not exist yet (to my knowledge).
Essentially what it'll do is connect any HTC extUSB equipped phone to any kind of ipod docking station.
My car's head unit has an ipod cable along with steering wheel controls so what I want to do is be able to connect my TP2 to the head unit via the ipod cable such that I can control the TP2's audio from my steering wheel (and possibly on a more advanced note display the track info, though I'm not too optimistic on that). Yes, I know it would be easier using the extUSB to 3.5mm adapter but then I'd have to control playback on the phone (or possibly through MSVC if it ever listens to me correctly).
I know the pinouts of the extUSB port and the Ipod connector. No problem making an adapter there for strictly the audio and charging part. The fun part is adapting the Ipod's control signals (for next/prev track, play/pause, etc). I have not come across any kind of technical data sheet indicating the kind of signal the HTC phone is looking for to control playback. I have a E100 remote that I'd rather not reverse engineer yet. For some reason I believe drivers will need to be involved in this one.
Anyone who can help out with playback control signal info for extUSB, I'll gladly send one of these adapters out when I get around to making them.
Wiring the E100 would be your best bet...theres a tiny SMD (http://en.wikipedia.org/wiki/Surface-mount_technology probably looks like a black blob on the E100) that controls the signalling for the extUSB. There really isn't another way to wire it...I mean, you can dump the SMD, snoop through it and build your own, but really...you have a E100, just wire it up. You won't get track/title info (I don't think HTC even outputs that via the extUSB) but it'll give you full control, as far as what the E100 is capable of.
This actually has been done before for a HTC Dream.
It was discussed here http://forum.xda-developers.com/showthread.php?t=465412
The original site is down but you can see the final product here http://www.engadget.com/2008/12/28/inelegant-hack-connects-t-mobile-g1-to-ipod-dock/
I was hoping some enterprising chinese company with a lax view on copyrights and such would mass produce one but it never happened
Related
I'm sick of trying to find a car cradle that has audio out, ps2 and 12v for charging!
Why is it that no manufacturers of xda cradles ever realise that some of us want to listen to mp3's in the car and have tom-tom voice prompts coming through our stereos!
Being right handed, I want my PDA on the right of the steering wheel, so I can operate Tom-Tom before setting off, or change tracks on media player. I did look at the Brodit pro-clip solutions, but they all seem to be for the centre console for my car (a citroen AX)
I've discovered that the driver's side vent mount has a removable panel, which means I can easily mount a small piece of wood (effectively a small flat shelf) for mounting a cradle, this also brings the device out of the reflective glare zone in the windscreen during night driving. It also means all I need is a standard xda iis cradle to do this mod.
So with much careful thought I've decided to do the following:
Buy a spare cradle:
http://www.my-xda.com/xda2s_other.html
Which leads me to the next question....
Has anyone got any modding experience with the xda2/xdaiis cradle?
similar to this old posting for the Wallaby...
http://forum.xda-developers.com/viewtopic.php?t=256&highlight=cradle
(although I couldnt see any of the images on this old posting!)
In theory, this project has 3 key issues to resolve...
1) Powering the cradle and Bluetooth GPS
Three options seem to be available...
a) The hobbyist approach...I've seen various "car-kit diagrams" like this one,
http://forum.xda-developers.com/files/xda_car_kit_circuit.jpg
but to be honest I have no pcb making experience.
b) 12V to 5dc cigarette socket transformer adapter to provide power to the cradle, and perhaps to the bluetooth gps for charging. This should be easier to achieve!
Anyone have any links for low cost solutions for this, obviously it would need to convert 12VDC to 5DC at 2-3Amps
c) As the xdaiis usb cradle charges directly from a USB power source, this seems an Ideal solution!
http://www.expansys.com/product.asp?code=EXP_USB-CLA
2) Audio out: THE MAIN PROBLEM!
Ideally I just want to get in the car and cradle the device, no other connections being required.
Therefore I need to modify the xdaiis cradle for audio output...
Ideally, the feed for the audio should come from the bottom connector, when the xdaiis is cradled.
With this in mind, I found this article about dismantling an xdaii cradle...
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=42&PN=1
If you look at the images on this web-page, you can see that - at the back of the cradle on the opposite side of the usb cable from the 5volt dc input is what looks like a pcb pinout for a headphone connector...
is this right? Can anyone confirm this.
Would it be possible to solder a connector onto here (assuming the solder pads connect to the 22pin connector!)
As this would be far easier than mucking about trying to solder onto the miniscule pins on the bottom of the 22pin connector on the cradle as it goes into the pcb!
If it works of course!
b) modify a headset
I did consider modifying an old wallaby headset to wire it into my car amp
http://wiki.xda-developers.com/wiki/Connectors , does anyone have any info on the pinout for the himalaya/blue angel headphone socket? I have also tried a friend's xda II headset on the IIs and yet again they have changed the pinout! The audio connections are once again totally different, resulting in the "echoing" effect when one headset is plugged in from the other device. This means that the audio ground pin has changed since the xdaII headphone socket schematic! This difference is also confirmed by looking at the handsfree "pod" on both headsets... The IIs has one button for answering a call, where the II has two buttons, wether it is the same as the XDA1 (Wallaby) remains to be seen....
c) buy a PDA2k 3.5mm headphone adapter...
http://www.expansys.com/product.asp?code=118289&sbadd=118289
Then use a standard lead to connect it to the hi-fi amp in the car.
3) charging the TOM TOM BLUETOOTH GPS
I'm wary of putting anything other than the recommended voltage (5VDC) into this device, so the best option is to supply power using (1b) or (1c) above, perhaps cutting into the supplied RJ cable to minijack psu to hook it up from the same supply.
While I'm on the subject of the bluetooth gps.... Does anyone knopw how long does the tom tom bluetooth gps work with a full charge?
Does it vary based on an active connection, or is it the same as on standby?
Do I need to power it in the car at all? Can I not just charge it as required at home? There doesnt seem to be much literature about the Bluetooth GPS reciever's battery life in the box!
Anyone care to comment on these ideas?
:lol: :lol:
I think the fact that no-one makes a cradle which provides audio-out through the bottom connector of the XDA2 is because the XDA2 doesn't provide this possibility. It's not the car-kit manufacturers' fault. Blame HTC.
However, I could be wrong... :roll:
My solution: I bought one of these XDA2 mounts ( http://www.pdamods.com/proddetail.asp?prod=A11XDA2MNT&cat=23 ) which works really well. It charges the phone and my TomTom BT GPS. To achieve audio-out I plan (eventually) to use the XDA2's headphone socket by drilling a hole through the mount's base in the right spot and using a 2.5mm jack adapted to play through the car stereo. Not an ideal solution, but surely must be simpler for you than trying to build a reliable (and safe!) 12V -> 5V convertor and butchering a spare XDA2 desktop cradle?
Just a suggestion... 8) Let us know how you get on. Good luck!
QUOTE 12V to 5dc cigarette socket transformer adapter to provide power to the cradle, and perhaps to the bluetooth gps for charging. This should be easier to achieve!
Anyone have any links for low cost solutions for this, obviously it would need to convert 12VDC to 5DC at 2-3Amps
Just about any mobile phone car charger will do.
Silicon s, you must be wrong :lol:
I have found someone that makes a DSP handsfree set with Audio on your car speakers, separate mic and all with the bottom connector. It even delivers laptopconnection for Dialup and GPS.
The overview
http://www.thb.de/showpage.php?lang=en&mode=show_product&cat=1&pid=2
Car Talk DSP
http://www.thb.de/showpage.php?lang=en&mode=show_product&cat=1&pid=2
The Cradles
http://www.thb.de/showpage.php?lang=en&mode=show_product&cat=1&pid=2
XDA docked
http://www.thb.de/bilder/take_talk/mda2_gps_big.jpg
http://www.thb.de/bilder/take_talk/mdaIII_large.jpg
MDA III - Important Information:
Replace file "Wavedev.dll" on your MDA III and restart the system. Audio response now can be listen via loudspeaker.
http://www.thb-service.de/download/MDAIII/Wavedev.dll
FYI, It appears that the replacement WaveDev.dll file offered by the car Kit company causes bluetooth headsets to stop working at all (not just in the car).
tfletch said:
FYI, It appears that the replacement WaveDev.dll file offered by the car Kit company causes bluetooth headsets to stop working at all (not just in the car).
Click to expand...
Click to collapse
That's what I'm looking for. Have you found anywhere to actually buy them? I looked over the whole site.
How about this alternative cradle. I bought one for my XDAIIs and it works perfectly. Got one for the birds XDA2 and that work great too.
It provides power to either a wired GPS or charges a bluetooth GPS, it has a built in speaker and a cables provided to run from the XDA's headphone socket to the cradle. THIS THING IS LOUD!
One word of caution, the speakers in my car are shielded so I don't get that warning noise from them that I am about to get a call or text. The speaker on the cradle is NOT shielded and so you do get interference when you are about to get a call or switch cells.
http://www.pdamods.com/proddetail.asp?prod=A1SSSPKMNT&cat=23
i thought about using my 6601 as an MP3 player in my car as well. but since my eclipse cdplayer does mp3, i abandoned the idea
option 1: cut up a 2.5mm headset and plug it into the top of the device
pros: cheap and effective
cons: have to plug it in every time (and unplug it to take a call)
option 2: pair a bluetooth headset with the device, crack it open and wire the speaker to a preamp
pros: wireless
cons: ruin an otherwise good bt headset, music would be in mono
option 3:
http://motorola.digitalriver.com/se...e&SiteID=motostor&productID=36065700&Env=BASE
"transfer audio to hands-free"
pros: wireless
cons: EXPENSIVE, pretty vague description
option 4:
http://www.itechdynamic.com/html/border22.htm
http://xprnnews.xfn.info/itech/nightingaleBSH338/en.htm
pros: wireless, stereo, routes incoming cails through car
cons: i cant find it anywhere
its called the "nightingale BSH338" or the "Bluetooth Stereo Clip Headset"
if anyone finds one, please reply with a link
ok i did some more reading on the subject and i found this (page 2 of the forum)
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CK8AG21MXDA3
http://forum.xda-developers.com/viewtopic.php?t=17149
Guys,
I bought a cradle from ebay (leeonline) because I cannot get a 4 in 1 adaptor from HTC. I tried using the vga-out (17 inch CRT Monitor), rca video out (our Television Set), Brandless USB hub, Generic/standard USB Keyboard and Generic/standard USB Mouse on it all at the same time. Everything works.
Now, I really no longer bring my laptop to work. My athena is all I need for Word Processing, Spreadsheets etc. There are quirks though. Sometimes, the mouse stops working or the athena hangs. (It may be the amount of programs installed.) Then again, It is still faster to boot than my laptop. The other downside is that even with the cradle plugged to the adaptor, It will still consume energy from the battery of the unit.
What I have done to my athena may not be new to most people but I would like to hear from other people what attachments or modifications they have done to make their athena more useful and powerful. In this way, we can all benefit from these ideas. Thanks!
Thanks!
yetdy said:
Guys,
I bought a cradle from ebay (leeonline) because I cannot get a 4 in 1 adaptor from HTC. I tried using the vga-out (17 inch CRT Monitor), rca video out (our Television Set), Brandless USB hub, Generic/standard USB Keyboard and Generic/standard USB Mouse on it all at the same time. Everything works.
Now, I really no longer bring my laptop to work. My athena is all I need for Word Processing, Spreadsheets etc. There are quirks though. Sometimes, the mouse stops working or the athena hangs. (It may be the amount of programs installed.) Then again, It is still faster to boot than my laptop. The other downside is that even with the cradle plugged to the adaptor, It will still consume energy from the battery of the unit.
What I have done to my athena may not be new to most people but I would like to hear from other people what attachments or modifications they have done to make their athena more useful and powerful. In this way, we can all benefit from these ideas. Thanks!
Thanks!
Click to expand...
Click to collapse
I used to do that, but the novelty wore off eventually. Now i just bring in a mini notebook. It's easier than carrying loads of bits about and connecting things to monitors (though that option is still there if necessary).
Pretty cool though if you like your gadgets.
Leoni is correct, however he can always leave the other stuff connected to the cradle and use it sorta like a docking station, but you would need a second cradle for the home TV. I'm glad this thread started because I myself was considering getting one for my TV. However, what should I do about the audio coming from my device (will I still be able to connect audio to my AV receiver)? As far as the 4 in 1 cable I would be able to get to the audio jack on the Athena however the down side is that not all USB flash drives would be supported with the 4 in 1 cable. Yetdy can you tell me how you work around getting audio streamed?
I think there are a few ways to stream audio.
#1 S-Video if I'm not mistaken is supposed to stream audio to your TV.
#2 Audio Jack to RCA Audio converters connected directly to the TV or amplifier would also help assumming you are using the 4-in 1 adaptor. Cradle cannot help you out with this option.
#3 Of course there is bluetooth connection which is what I am going to use. Got a bluetooth transmitter and receiver from ebay but is currently busted (bad seller). Another is to get a BT that has a changeable earphone/buds. Change the earphone to an audio jack to RCA Audio jack and follow #2.
Hope this helps.
yes and no
yetdy said:
I think there are a few ways to stream audio.
#1 S-Video if I'm not mistaken is supposed to stream audio to your TV.
****You are mistaken, S-video is video only (the pins are luminance, chroma, ground and something else I can't remember off the top of my head) ****
#2 Audio Jack to RCA Audio converters connected directly to the TV or amplifier would also help assumming you are using the 4-in 1 adaptor. Cradle cannot help you out with this option.
****if it is anything like the one I got from ebay then no, as it covers up the headphones out port from the athena but does not replicate it on the back ! the athena also carries audio out from the same USB connector that you charge it from (this is why the socket on the athena is an unusual/different shape compared to your plug on USB charger) if they had replicated this port propely on the dock then you could have got audio out that way, but the dock connector for that is also wrong (standard USB shaped socket, not the odd one from the athena) ****
#3 Of course there is bluetooth connection which is what I am going to use. Got a bluetooth transmitter and receiver from ebay but is currently busted (bad seller). Another is to get a BT that has a changeable earphone/buds. Change the earphone to an audio jack to RCA Audio jack and follow #2.
****it is feasible to have the athena transmit stereo bluetooth to a nearby device !****
Hope this helps.
Click to expand...
Click to collapse
just my 2 pence worth
If you want to play audio on your home theatre speaker, you could also consider the option of plugging an FM transmitterinto the headphone jack, then use your FM receiver to play through your theatre speaker.
That was how I used to play my music in the car, through the car's srereo speakers.
eaglesteve said:
If you want to play audio on your home theatre speaker, you could also consider the option of plugging an FM transmitterinto the headphone jack, then use your FM receiver to play through your theatre speaker.
That was how I used to play my music in the car, through the car's srereo speakers.
Click to expand...
Click to collapse
wont work if the Athena is in the ebay dock/cradle, as it covers up the audio out port, but does not replicate it.
Ice coffee,
Maybe you can share some other options here. You may have other ideas that may be useful to us. I just got my athena last month and cradle last week so I cannot really say with authority what it can and what it cannot do. If you can help us out in maximizing the athena with its cradle, many will appreciate it.
None of the video outputs from the 4-in-1 carry audio, the only options are BT a2dp or the headphones jack. Seems a bit long-winded to me though - I'm sure there are less fiddly mods out there. I just used to use the magnetic keyboard as a stand, slipped a BT keyboard over the top of it and the 4-in-1 for usb hub etc. This left a free audio jack to use as I wished. Seems like the docking station is more of a hindrance than a help.
HTC Advantage
Docking station
Keyboard
Mouse
Hifi Bluetooth A2DP adaptor
USB Hub....
I think my EEE pc is a more convenient device on the whole than the above setup would've been if i'd carried all that with me I wouldn't have had any space to fit my work stuff!
I came accross another docking station for $119.00 USD that has the audio option on the side along with 2 standard USB ports instead of 1. I think it's a bit too pricey, due to the fact that on flebay they do have a2dp stereo bluetooth adapters for like $50 USD. Besides with that and your bluetooth headsets it might still be possible to answer a incoming phone call on your bt headset without having to hear the audio coming from your A/V receiver (considering you left the phone on). Leoni, both options have their own drawback (no powering source with the 4 in 1 cable for all USB storage devices and the inaccessable headphone jack when using the docking station). But anyway I'm going to order the 4 in 1 cable too and see which one works best for me on a day to day use.
as I said the only simple option is to use bluetooth and as tootalk2000 pointed out you can get adaptors on ebay for £25 ish, I suppose the other more complicated option would be to, take your cradle apart and replace the USB connector into the phone with this,
http://cgi.ebay.co.uk/2in1-Audio-US...oryZ3728QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and then take the other end of this apart and make it fit in your cradle, it would actually be quite easy to do as there is a lot of space in the cradle.
ice_coffee said:
as I said the only simple option is to use bluetooth and as tootalk2000 pointed out you can get adaptors on ebay for £25 ish, I suppose the other more complicated option would be to, take your cradle apart and replace the USB connector into the phone with this,
http://cgi.ebay.co.uk/2in1-Audio-US...oryZ3728QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and then take the other end of this apart and make it fit in your cradle, it would actually be quite easy to do as there is a lot of space in the cradle.
Click to expand...
Click to collapse
Awwwww shux, someone just gave me some experimenting to go do. I'm ordering one of those jacks today, and hopefully it will come around the same time as cradle. I'll just super glue it to the back portion of the cradle and plug it in externally. Due to the fact that the USB port is still on there you would still be able to sync even when the ear phone jack is still in use.
tootallk2000 said:
Awwwww shux, someone just gave me some experimenting to go do. I'm ordering one of those jacks today, and hopefully it will come around the same time as cradle. I'll just super glue it to the back portion of the cradle and plug it in externally. Due to the fact that the USB port is still on there you would still be able to sync even when the ear phone jack is still in use.
Click to expand...
Click to collapse
lol my thoughts exactly.
Hi,
after a long year, I finally will get my HTC HD.
accessories are on the way, too:
Sennheiser CX 95
sandisk 16 gb sdhc
Black Silicone Cover Case + Film
Handsfree Remote Control for HTC Touch
I will post my review of these things later when I get it. It would be nice if someone can comment on my selection.
I am interested, did the handsfree remote work?
I guess it will arrive this week. At least from the ebay page, the seller said it's a remote control that does volume up/down, forward/backward, answer/hang up...
Hope it works
the stock headset will do play, fwd, bck, answer and hang up, just not volume, so a simple volume control should be no problem to incorporate, therefore should work.
Does the add specifically state it is for HD and is it mini USB or 3.5mm jack?
http://ewwt.net/Photo/11527.jpg
The seller says it works with HD and there is a 3.5mm connection for ear-plugs. This is a good combination with cx 95 style, since the wire is very short.
I should have done more research on the usb remote control
obviously, it doesn't work with HD.
what the heck is wrong with HD develop team? with bother to put a ext-usb with out audio output?
The Touch HD does have audio output on the extUSB port. Maybe on different pins though than your wired remote uses?
casefan7 said:
The Touch HD does have audio output on the extUSB port. Maybe on different pins though than your wired remote uses?
Click to expand...
Click to collapse
Not it doesn't. The extusb has pins for audio but they are simple not connected!
The ebay seller I mentioned before also made wrong description. Shall I spend 5 euro to send it back so that I can get $6 refund (not the $12 I paid coz shipping cost is non-refundable)? no, I just keep it and maybe send to someone who has a diamond and give the seller a negative feedback.
You are right, I wasn't properly informed. Since I read an other thread about video-out on the Touch HD, I thought that next to the video signal, also the audio signal was transfered via the extUSB. Now I understand that all audio goes throught the 3.5mm audio jack at the top.
Isn't there any way to solder those pins on the extUSB to the internal audio connectors? This way everyone could use usb headphones and usb wired remotes.
The stereo in my car supports Ipods and Iphones via USB. The stereo recognizes the Apple devices and lets you browse the media through the stereo itself - fully cataloged. You can also use Pandora and other music software through the USB port.
When I plug my Photon into the USB port, the only thing that works is browsing the media stored locally on the phone as a USB drive. I can't stream Pandora through the USB port.
Any way around this? Any way to emulate an Iphone?
Get a bluetooth receiver
I have a nice Sony HD Radio receiver, it doesn't support bluetooth. I don't want to spend a bunch of money replacing it.
Nullinvoid said:
Get a bluetooth receiver
Click to expand...
Click to collapse
Assuming the stereo has the ability to hook one in...not to mention that, they are stupid expensive in a lot of cases.
But onto the actual question, no - there is no way to emulate an iOS device. The cable for an iDevice has several extra pins, which include Audio Out - ours doesn't in the USB connector at least.
Kcarpenter said:
Assuming the stereo has the ability to hook one in...not to mention that, they are stupid expensive in a lot of cases.
But onto the actual question, no - there is no way to emulate an iOS device. The cable for an iDevice has several extra pins, which include Audio Out - ours doesn't in the USB connector at least.
Click to expand...
Click to collapse
That makes sense to me. I guess the standard audio-out jack will have to do.
Thanks!
AVRCP 3.0 will have some of what you are looking for in regards to transfering current song info over to the HU. The driver is already built by BlueZ i think it is (which ever the open source driver android uses) so its just a matter of getting it in android. Maybe ICS?
For Audio its either BT or audio jack. You can also access anything on the USB partition (some support multiple devices) but some HU do not index things corectly (my eclipse will not put things in alphabetical order arggggg) so its luck of the draw.
Plus there are more HU coming out including ones now coming WITH android.
Any idea if this would work?
http://www.ebay.ca/itm/Hifimediy-Sa...n_0&hash=item20cb2a3799&_uhb=1#ht_1314wt_1271
if combined with this:
http://www.ebay.ca/itm/Usb-type-A-f...s=63&clkid=4859388797714287148#ht_1424wt_1037
And this:
http://www.ebay.ca/itm/Micro-USB-ha...ies&hash=item2eb8f6c584&_uhb=1#ht_4275wt_1037
I'm trying to make a one-connection, more or less universal, high quality audio and charger set up for my truck. Since the DAC is USB powered i'm not sure where the power would come from in this case. The phone or that adapter. I just like the simplicity of this unit for what i am doing (it's all going in my dash).
EDIT: I took the plunge and ordered a bunch of bits that SHOULD work (a UCA202 was cheaper, so ordered it). I'll take pics and document the setup and installation, post it all when its ready. It'll take a few weeks for the stuff to get here.
What are you trying to do? Give yourself an entertainment centre in your truck?
What I have done in my truck is use a Bluetooth stereo for streaming all audio from my HTC. If I were to install one HDMI screen I could have HD TV.
For charging, I just use a USB adapter in the cigarette lighter. Make sure you get one capable of outputting 1A or more, and also fools the phone into thinking it's connected to the mains.
When at a festival the other year, I used the tailgate as a makeshift bar, and the phone was streaming music over Bluetooth. I also had the stereo remote to control the volume, and used the air conditioning to chill some drinks. Although, will use a mini fridge next time as I used a shed loads of Diesel
I have a pioneer head ( http://www.pioneerelectronics.com/PUSA/Car/CD-Receivers/FH-P8000BT ) and an iBolt cradle. What I was hoping for was to use USB to provide power and use a DAC to get better sound quality from the tunes that I get over bluetooth. This deck also has an auxiliary in on the back, but trying to avoid using the amped headphone out. I went with this deck because of the connection options and didn't care about touch screens. That's what my HOX+ or Nexus 7 are for. So having a single USB connection for everything would be great. Pretty much the only thing that iFail devices have on us.
Sent from my HTC EVARE_UL using xda app-developers app
Here is my start. I didn't get the DAC yet, and I need to wait for USB OTG with Charging before I can, but the set up is ready for it!
Sure looks good, but I'm unsure how the sound quality will be, I'm not sure how the DAC works by accessing the USB.. Does it just see it as a USB storage device? If you're playing MP3's anyway, why not just stream over Bluetooth. Once the track is digital, Idon't think that you would want to convert to analogue unless it's playing it directly.
Are your MP3's a decent bit-rate? I have never had an issue with MP3's over Bluetooth. I normally download weekly music podcasts and stream those.
I'm gonna chime in hear and say just bought the pioneer Afh x5500, and although my EVO LTE streams spotify and stock music player over Bluetooth, it does not send track info whatsoever. My note 2 did but, I prefer the EVO. So, I'm waiting for the 8500 to come in now because it has hdmi input onboard so it should be able to take hdmi to mhl and then perform correctly. As well as apradio functions. Anyone have any experience with this? Or, does anyone know how to get Bluetooth to stream song/album info to the head unit?
Sent from my EVO using Tapatalk 2
One of the #1 reasons I got the HOX+ was the 64GB storage for my FLAC collection. Originally this concept I started while I had the Galaxy S3, which with a kernel and CM 10 can enable the DAC output while allowing the device to still recieve the charge.
That said, the deck you mentioned with HDMI might just do the trick too. And it really would be universal. Hmm.... I like this deck (It was old when I got it) because I don't really care for touch/dvd in my dash. This has a big rotary control knob, and I even have the lights turn off at night so I just control everything from the phone (except Volume). But i'll look into the one you suggest.
Anyway. This set up will do the trick for now. I hard wired the charger and AUX into the stereo harness so it looks clean and stock. I doubt I'll really tell much of difference anyway without the DAC at this point. I'm not getting any line noise like I thought I might.
Well, ill write back after I get the new deck. I'm really hoping for all functions or ill have to figure something else out...
Sent from my EVO using Tapatalk 2
OP, any update on whether the DAC and cable worked with the HOX+?
I'm interested in getting a DAC to work with my high impedance in ear monitors. The driver in the phone doesn't have enough output power to adequately drive them.