HTC released a new stock rom for the sprint touch pro on 09-25-2009.
TouchFlo 3D updated to improve speed and stability
Dialer application enhanced to improve the handling of incoming calls
Resolves an issue using the “r” and “w” keys on the virtual keypad
Improves contact searching performance
Includes a variety of minor bug fixes
http://www.htc.com/us/SupportDownloadList.aspx?p_id=195&act=sd&cat=2
Does this ROM disable ability to Tether?
I read over on PPCGeeks that this ROM disables the ability to tether, has anyone tried?
It does disable the tethering hack. It prevents the ForceCellConnection key from being changed from "Phone as Modem" to "Sprint". When you change it, it immediately reverts back to "Phone as modem" in the registry. I suppose either a process is checking it constantly, or there's a process by which reg edits can be automatically reversed, or it is read only, or ...
Here's hoping some smart person will figure it out. The touch improvements in this ROM are huge (finger scrolling); they make the device ten times easier to use.
I am happy they fixed a few bugs, but this also means Touch Pro is not getting a Windows Mobile 6.5 upgrade. Too bad.
the mini-usb connector on my phone broke, so I can't get an activesync or usb connection. It charges, but that's it. Is there anyway I can do the rom update through a memory card?
thanks
from my understanding, rom update can do only sync with PC. So, you cannot do it.
Please tell me if I'm wrong
loaded ROM from mSD:
open HTC download with WinZip. Extracted NBH file to memory card
renamed NBH to RAPHIMG.nbh
inserted card
Hold Volume Down, Power, and then Rest
loads just fine. Also installed a Nascar and NFL app, in addition to changes as above.
that kinda sucks about the whole tethering thing, i shoulda looked on here before updating! but bluetooth may work for updating?? don't quote me though.
I don't know if anyone has a hack for these but there are two problems I found and have emailed HTC only to get the following response.
My Issues:
I downloaded the latest Rom Update for the Sprint Touch Pro and am having issues. First issue I found, with this update I seem to have lost the ability to select multiple emails for deletion. Secondly, when replying to text messages, windows used to mark the prior incoming message as read, now it leaves it unread. I have to navigate through each msg using the touchflo in order to mark them read. Any assistance regarding these matters would be appreciated. Thank you.
Click to expand...
Click to collapse
HTC Response:
I would be more than happy to assist you with this information. To select multiple emails on you device, go to your email inbox and tap Menu> Select Messages. You will have three options: All, All Below, and Several. All will select all you your messages. With All Below, you will select a message and all items below it will be selected. You can use several to pick and choose messages. As for the text messages, this feature was added with the update to ensure that you do not miss any of your messages. You phone is operating as intended.
If you have any other questions, feel free to contact us again. You can find additional support at our user forum www.htcwiki.com. There is also a customer satisfaction survey for you to take if you are interested.
Sam
HTC Tech Support
http://www.htc.com
Click to expand...
Click to collapse
Okay, thanks, I thought it was me
fio316a said:
I don't know if anyone has a hack for these but there are two problems I found and have emailed HTC only to get the following response.
My Issues:
HTC Response:
Click to expand...
Click to collapse
THANK YOU SO MUCH.
Sorry for the yelling. I saw this when I tried to select multiple messages and I thought I had put a registry hack or something in the previous ROM. They MADE it LESS useful?
What were they thinking? This is not user-friendly.
Ugh.
Has anyone else had problems syncing with Outlook? Since I installed the new ROM I cannot get Active Sync to connect with my computer.
It connects as a PocketPC USB Sync but will not connect to Windows Mobile Device Center. The phone also charges. I unchecked the "Advanced Network Capabilities" box and still no luck.
Any ideas?
So someone has posted a fix for the txt msg issue on ppcgeek.com...
http://forum.ppcgeeks.com/showthread.php?t=87404&page=2
Look for the program called "LOSER's SMS fix.cab" in post #12.
i dont believe that.. i think they realized the mistake after the fact and making a stupid cover up story.. thats what made me go back to stock rom.. i dont have time to go in and out 49 times for A DAM TEXT. screw that... htc/microsoft FIX THIS PLEASE lol
mdmanning70 said:
Has anyone else had problems syncing with Outlook? Since I installed the new ROM I cannot get Active Sync to connect with my computer.
It connects as a PocketPC USB Sync but will not connect to Windows Mobile Device Center. The phone also charges. I unchecked the "Advanced Network Capabilities" box and still no luck.
Any ideas?
Click to expand...
Click to collapse
really i never had that problem
i just received a tp from insurance today. how can i tell if my tp is running this rom?
it does appear to be running the latest sprint radio.
sherm420 said:
i just received a tp from insurance today. how can i tell if my tp is running this rom?
it does appear to be running the latest sprint radio.
Click to expand...
Click to collapse
If it is running the latest radio, it is also running this ROM. Stock ROM and stock radio are installed as a single upgrade.
mdmanning70 said:
Has anyone else had problems syncing with Outlook? Since I installed the new ROM I cannot get Active Sync to connect with my computer.
It connects as a PocketPC USB Sync but will not connect to Windows Mobile Device Center. The phone also charges. I unchecked the "Advanced Network Capabilities" box and still no luck.
Any ideas?
Click to expand...
Click to collapse
Had the same problem.
After update, WMDC just shows red X.
Tried uninstalling WMDC, no joy.
Any suggestions?
I just received a new Touch Pro as a replacement, and it is running this new ROM update. The only problem im having is that Opera does not show up on the task manager at all. So when i close(minimize) it i have to reopen from the start menu or touchflo and then when it opens my tabs are still open. Anyone else having this problem? Anyone have a fix or idea?
Related
Does anyone know a way to know if an sms has indeed been sent away? some Sms's just don't arrive and there is no notice to confirm the fact that it was sent off.
Lionel,
Pocket PC 2003 solves this. It displays a little message bubble when a message has been successfully sent.
I have seen that in Pocket PC 2002, if I write and send a message and turn off the display before the message leaves my phone, it will never go. But it will give you the error messge when you go back into your SMS's.
Regards
Keith Burke
Dublin, Ireland
many thanks, so I guess I'll have to get pcc 2003!
greetings,
Lionel
And you can cook it up from here
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Go for the 4.00.10
Best of luck
Hi Ranger,
Can I be sure everything will work all right by upgrading to 4.00.10? I read quite some comments about a series of problems and some people going back to previous versions. Isn't it going to bust up my phone settings in Belgium? Someone wrote not to do any upgrades unless your an expert technician.
2. If I do go on with the upgrade can I just use sd-backup and get my stuff back from Sd-card? Isn't that going to restore my old system?
3. I don't know anything about technics. Most of the options on http://cuba.calyx.nl/~jsummers/ROMkitchen/ sound like Chinese to me.
Sorry for all the dumb questions, but I want to make sure I'm not going to run into trouble.
Hi Ranger,
I decided to run the risk anyway. I can probably do a hard reset and backup if I get into deep trouble.
I went to your link, but as I am a complete beginner at this, I got stuck after 'building the rom now'! I asked for the 'Installer.exe' but couldn't find it on my pc. What shoud I do?
greetings,
Lionel
Ok, first off. Back up your XDA ROM to your SD card. I've never done this, but I'm sure once this is done you can copy it to your desk top.
Secondly, yes there is a possability that it will kill your phone. See http://www.xda-developers.com/forum/viewtopic.php?t=1624
But I have never had a problem, once I stick to my golden rule. Close EVERY PROGRAM that you possibly can while doing the upgrade. And son't touch your computer while it is doing it as well. It's a tiny price to pay. If you're using USB it shouldn't take more than 5 minutes. With Serial cable, I heard it can take upto 20 minutes, maybe more.
As far as downloading it, after you've selected the options in the ROM kitchen [whici belongs to Jeff Summers by the way, not me ] make sure that the bar up the top is still green, NOT RED.
Next, down the bottom there are three options. For yourself, choose the EXE file. After a few seconds, might take upto 30 seconds, up the top of the screen will be a button to down load your file. Just save it somewhere on your computer and run it.
Make sure that your phone is in it's cradle which should be conntected to your computer [or connect the phone to the computer with a serial or usb cable]. Also make sure that the power cable is plugged in.
I think some people have advised taking out your SIM card but i never have.
That should be it.
Let me know either way. If it messes up, just pray that it's after 5% or 10%, so I hear. If so we can try the second option.
Regards
Keith Burke
Dublin, Ireland
One last thing. Take a note of your Network provider settings [GPRS etc...] before you upgrade. They will not be in the new 2003 image.
I forgot when I was doing mine and no longer have my GPRS settings
Hi Keith,
I'm trying it out right away. I have the backup on the sd-card, so that should work fine.
Just be careful with your SD card. I have heard a few reports that it sometimes gets erased in the PDA. Can't remember when or where but if you search the forum you might find it.
Good Luck. It's worth it.
if all you need are sms delivery reports, just click on options when in the compose sms screen and then click on delivery reports, unfortunately you have to do this for every sms as there doesnt seem to be a way to switch it on permanently.
ranger said:
And you can cook it up from here
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Go for the 4.00.10
Best of luck
Click to expand...
Click to collapse
Does this have a radio update ?
Regards
René
Hi,
I've been trying to cook about 20 times since the 1. of August. Tried about everything. Tried all the roms, with and without adding software. Turning off my firewall. Trying all the Rom's. No other programs running.
This is what happens every time:
After selecting the items, I choose the 'install.exe' option and choose 'build rom now'. It starts doing 'something'. I have ADSL and after about 10 seconds the blue bar at the bottom is completed. At the top of the window in the yellow background it keeps saying
'Creating rom... Please be patient
copying rom Files
running mkrom
even after waiting for 30 minutes nothing more happens.
What am I doing wrong?
greetings,
Lionel
Radio Upgrade
@rk
No.
There's no Radio Stack Unit (RSU) Upgrade integrated.
As it depends on the location, where you live, be carefull, which you choose.
For me living in (good ol') Europe the RSU 4.21.00 from O2 UK webside is working.
My native language is Greek and naturally I send Greek sms.
The only problem is that XDA sends them using Unicode character set meaning that over 70 character messages will be splitted.
Does anybody know of any solution on this issue?
I have an O2 payg sim card, even though I ask for delivery reports on sms each time I dont get them, reason being the remaining balance comes in as an sms which cancels the process somehow. Has anybody got a solution to this?
regarding the last, on o2, put *0# in the subject line, and the main sms in the body.
neil
ukneil said:
regarding the last, on o2, put *0# in the subject line, and the main sms in the body.
neil
Click to expand...
Click to collapse
Thank you very much, that worked a treat, I was told by somebody to put that *0# before the fone number, no wonder it didnt work, thanks again.
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
1) I dont think that was ever a default thing? Did you install something and forget? have a cooked rom? There are A2DP solutions in this forum, "Use the Search luke."
2) No, its shagged. I installed the windowslive50.cab file I had on universal, it works now.
3) No idea, mine works fine. Hard reset? Check your sim?
I can get online with my WLM but it does sometimes take a resync of the whole account to do it.
Skype did say (unless changed recently) that they were still working on transferring calls to bt headsets. Which means, currently, that it does not work through anything other than headphones and the mic on the phone.
Comm Manager
Hello,
It is possible to change the green color from the Comm Manager ?
Thanks
French Keyboard
I have upgraded my french Advantage and all is OK apart for keyboard layout. On my old Universal (also french keyboard) I had changes the registry for hklm/software/oem/qwerty layout to 1040C (hex) and it had worked.
On the advantage this does not seem to change anything, any ideas?
Also has anyone got integrated VoIP working? I have used a CAB file from Universal to activate it and SIP Config Tool to do the set up but it does not allow me to select VoIP from today menu.
Anyone got this set up and working? Integrated VoIP is the reason I upgraded to WM6!
Messenger Etc....
Live Messenger stops working correctly after a soft reset. Initially it works fine. Contacts show as offline, although they are still able to contact me and vice-versa.
As far as I can ascertain push email still functions correctly.
I cannot confirm whether this is related to MS's side (rather than the program) as I haven't had chance to check if anyone else experiences the same problems.
Have tried installing the separate CAB file but I am subsequently told that I do not have the necessary permissions (or something like that).
This comes from tests on a T-Mobile branded Ameo (not the brand new one I'm selling, if anyone decides to cross-check!)
I haven't come across any other problems. Seems a bit less laggy than the original T-Mobile ROM, loads up web pages slightly faster too it seems.
No other issues as yet.
Ive had no probs at all since installing the messenger cab.
Still using it now.
Do we know what version of WLM is on this new ROM?
I've pulled \windows\wlmmessenger.exe to desktop and looked at the Version tab...10.6.28.2700 is what comes out.
Pyrofer - can you do the same on your cabbed version and let me know what the version number says? Not always an accurate guide but worth a shot. Also the digital signature is 3rd May 07.
Cheers
Ant
EDIT - never mind, just seen ur post in general Athena tab...10.6.0026.1400
I wonder what is different? If anything? I also wonder whether this is actually a final release of the ROM that's just been leaked early, as WLM is a pretty central component to web using Athena owners (myself very much included) and for it not to work after a soft reset...hmm.
Hi royalmail,
I've got exactly the same problem you mention about the phone.
I was unable to answer calls.
So I belive you've use the second file to upgrade to WM6 (HTC001 ... with ipl...).
You have to go back to WM5 WWE using the last ROM posted in the Athena upload folder in the XDA FTP. After flashing your Athena to WM5, Use the first ROM posted (the one with a readme file included).
And voila! No problem at all since I've done it this morning, everything works fine!
Hope this helps!
Hi Thibale,
I flashed with the t-mobile version. the phone dead only once so far, though i am not sure it's caused by WM6. Anyway, thx for sharing your info.
royalmail said:
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
Click to expand...
Click to collapse
See if this helps
http://www.silentservices.de/btIO.html
Also, read through the forum regarding some of your other issues.
Try to disable your GPRS and see if your calls start coming through.
Pyrofer said:
Ive had no probs at all since installing the messenger cab.
Still using it now.
Click to expand...
Click to collapse
Thanks for all the input.
@Pyrofer, could u upload yr WLM5.cab here? thanks in advance.
hi everyone, I'm using O2 XDA Atom Pure, and the ROM is AKU 0.3 CHT(0.7CHT stable version hasn't release)
I have a problem, when I use pushmail, after serveral hours the actvieSync would stop and shows "Waiting for network", even though I press the "Sync" button, it still shows "Waiting for network", and mail also cannot be push to my cellphone.I have to soft reset to make activeSync work,but this problem still occurs after a period time.
I've already check my GPRS netwwork settings, it's all fine and setting are all correct,and I did not install any software that will affect ActiveSync,so anyone could help me to solve this problem? otherwise the pushmail function is not useful for me....
verseaucus said:
hi everyone, I'm using O2 XDA Atom Pure, and the ROM is AKU 0.3 CHT(0.7CHT stable version hasn't release)
I have a problem, when I use pushmail, after serveral hours the actvieSync would stop and shows "Waiting for network", even though I press the "Sync" button, it still shows "Waiting for network", and mail also cannot be push to my cellphone.I have to soft reset to make activeSync work,but this problem still occurs after a period time.
I've already check my GPRS netwwork settings, it's all fine and setting are all correct,and I did not install any software that will affect ActiveSync,so anyone could help me to solve this problem? otherwise the pushmail function is not useful for me....
Click to expand...
Click to collapse
did you launch the hand writing pad (small) ad may I know which version you are using?
dcoloane said:
did you launch the hand writing pad (small) ad may I know which version you are using?
Click to expand...
Click to collapse
I'm using 0.3 CHT fixed By Jiggs,not dcoloane version.
I didn't launch small hand writing pad but in SIP menu, small hand writing pad is in the list, should I disable this hand writing pad?(how?)
I also see there is a dcoloane version which is made by you, but I found you write:"Sunglobe.ttf is used instead of mingliu.ac3, wince.nls is 1.5MB from CE-Star". I don't know if mingliu is instead by sunglobe will made system fonts unclear or not?
verseaucus said:
I'm using 0.3 CHT fixed By Jiggs,not dcoloane version.
I didn't launch small hand writing pad but in SIP menu, small hand writing pad is in the list, should I disable this hand writing pad?(how?)
I also see there is a dcoloane version which is made by you, but I found you write:"Sunglobe.ttf is used instead of mingliu.ac3, wince.nls is 1.5MB from CE-Star". I don't know if mingliu is instead by sunglobe will made system fonts unclear or not?
Click to expand...
Click to collapse
no it won't, I subsitide the font because I will receive Simplify Chinese SMS and it seems that sunglobe is a better font for both CHT & CHS.
The FIXED version had problems (unstability) on Active SYNC because of the SIP's not really PORT from the same version of the original ROM. Some SIP's are from AKU2.2 WM5 while some from dll's from other devices. The final one is one package get from WM5 AKU2.2 which should minize the impact on system stability. Although I still did not figure out why the small hand writing pad still causing problems. If you really want to use Push Mail often, i suggest you use back AKU2.2 or the final ROM by me, before flashing the new ROM, just use PCBckBackup your SMS, Contacts, Tasks and Calendar stuff to the SD Card. But if you don't want to flash again, Use only Chanjie as SIP instead of the HandWriting.
Well, although this post is pretty old...
I've always been having that problem. Even after some years I still can't tell the reason.
The solution I've been using since then is to restart ActiveSync on the phone using the task manager (which probably does the same than a complete soft reset, but is a lot faster).
Since I've upgraded my Diamond with a new firmware ActiveSync is displayed in the list of active tasks. Using another task manager I killed the process which still didn't help. In another post here I read that disconnecting your Gprs/3g connection might help. So it did.
Using Google you can find a lot of board posting from users with that problem. Noone has found a real solution and Microsoft doesn't seem to care about it.
What I am curious about is: Does your Exchange server have a dynamic IP?
Mine does. And PushMail is only active during the day. The daily disconnect of my provider is somewhen in the night. So when Active Sync starts again the following morning it's beeing confronted with another server ip. Maybe that's a possible reason?!
Hi,
Just received a TG01 as insurance replacement for HTC Touch HD (none in stock) on Orange and getting used to it, for better and worse...!
One vital thing I keep finding is the connection sometimes switches to using 3G when I am connected to wifi. On the HTC, it was a simple case of using Comm Manager and turning off the Data Connection. On this phone, the connection manager just has 'Phone', 'Bluetooth' and 'Wifi' - and they're either on or off. The 'Phone' option turns all the functions of the phone off, including the data connection, but it's not exactly ideal.
The phone is running WM6.5 - the comm manager doesn't look very Microsofty so I'm guessing it's a bad Toshiba add in.
Any help getting something decent and easy working would be appreciated!
Pat
patc said:
Hi,
Just received a TG01 as insurance replacement for HTC Touch HD (none in stock) on Orange and getting used to it, for better and worse...!
One vital thing I keep finding is the connection sometimes switches to using 3G when I am connected to wifi. On the HTC, it was a simple case of using Comm Manager and turning off the Data Connection. On this phone, the connection manager just has 'Phone', 'Bluetooth' and 'Wifi' - and they're either on or off. The 'Phone' option turns all the functions of the phone off, including the data connection, but it's not exactly ideal.
The phone is running WM6.5 - the comm manager doesn't look very Microsofty so I'm guessing it's a bad Toshiba add in.
Any help getting something decent and easy working would be appreciated!
Pat
Click to expand...
Click to collapse
Hi Pat: Wellcome to this TG01 Thread (even for few days I assume )
Anyway, I use the famous app Modaco's NODATA
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
There is another app doing the same and more finger friendly here (but never tested):
http://www.modaco.com/index.php?s=&showtopic=246171&view=findpost&p=1265802
You can try both and review here , if you agree
By the way, as a accidental TG01 user, could you please compare features with your HTC Touch HD? Thank you in advance!
Thank you for the helpful response and welcome
I've tried both apps - the first one only disables connections in a sort of semi permanent way and says you have to manually stop any existing connections when you turn them off - the point is, I can't manually stop the existing connections, that's what I want an app to do, and what Comm Manager used to do!
The second one complains about the .net framework and refuses to run, even though I have the latest redistributable on there, having windows mobile 6.5...
So I'm still a bit stuck.
I will post a comparison when I get the chance
You are welcome! That's a bit odd. I've been using NODATA for ages, on mi former device and now on TG01 under WM6.1 and WM6.5.
You have to be off data (not connected or only wifi connected). Then you ENABLE of DISABLE each mobile connection with the soft key "Toggle" and that's all. Which ROM do you have? Does somebody else have problems with NODATA?
Hi everybody,
I'm having problems with nodata on myTG01 (Evealex V5 ROM).
As soon as I launch it, it gives me an error message.
It used to work great with the second original toshiba ROM.
Please, help me !
Install attached HTC comm manager.
and do the following for Wlan:
Go to key in registy "HKLM\Software\Drivers\WLAN" and copy the value from 'AdapterName" string. Now go to key in registry "HKLM\Software\HTC\CommManager\WLAN" and edit "DeviceName" string. You see there value like this: "{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETW12511". Delete the last part of this value ("TNETW12511") and past the value "AdapterName" which you copy at end. Make soft reset and that is all. Now Wifi button on your device should work properly
I have been trying to set up a VoIP client on my Windows Mobile phone for a long time, starting with the HTC Wizard which I could never get to work.
I have finally managed to get a VoIP client with a really nice interface working on several phones that I have tried it on.
I am using ViaTalk as my provider but it should work with any VoIP provider.
It works great (with a slight delay, nothing that I can't live with) on an unlocked HTC Sprint Touch Pro 2, a T-Mobile HD2, a HTC Diamond and an HTC Fuze.
The application is by NCH software out of Australia and it is free to use, or if you want to unlock all of the features of the application, download and register the business edition.
Here is the URL for the download:
http://www.nch.com.au/talk/pocket.html
Or if you would like, PM me and I will be happy to send it to you as an attachment to an email.
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
hecthork said:
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
Click to expand...
Click to collapse
I am using the paid version but the only difference is that it unlocks some additional features that most people proably don't need anyway.
It is not trialware so it has no expiration.
thx you man, i'm trying this app since yesterday; works good!! easy to configurate, i'm using the free version because; i don't have 2 line, i don't use conferente mode... but it will be interesting trying these features xD
How does this app compare to AgePhone?
Hello,
why not to give a try to PortGo !
http://www.portsip.com/softphone.htm
The free version is sufficient and very simple to use, even with several providers (I currently use 2). Skin and language are easy to adapt if necessary (I've made it for French), see also here http://forum.xda-developers.com/showthread.php?t=508715
Dangze
bobzero said:
How does this app compare to AgePhone?
Click to expand...
Click to collapse
I really couldn't tell because I have never tried AgePhone.
I have tried most of the different VoIP clients mentioned throughout this site but I have never been able to get one to work right until I tried this one.
It could be that I am too stupid to configure them right or it could also be that they simply don't work very well, I can't say.
As for PortSIP, I never got it to work right and the developer dropped off line a while back as far as I can remember.
This little VoIP client that I am using has got a clean interphase, it is easy to configure, it does not require any special "helper" apps. so I am happy with it.
Hope that some of you enjoy it too.
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
ardec1 said:
{R^7Z trim]
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
Click to expand...
Click to collapse
I have mine set so that the light always stays on until I turn it off(I turn off auto back-light, my preference). So, no issues there. Additionally, I think there is a setting or app that will allow WiFi to run even while the phone sleeps. Or perhaps it is set into a low-power mode until the power key is pressed?
Howto in France ?
It seems great but how could I make it work in France.
My provider (mobile or at home) is SFR.
Thanks in advance to all for your answers.
Setup file attached to original post
I finally got around to attaching the setup file to my original post so it can now be downloaded directly from this site
Hi,
I suggest to please change the title to "Express Talk for WM".
I already tested it on my Ultimate 8502. I can call but can not receive incoming call. It ring but after receiving, it stop ringing with no active call and no sound. Any solution?
thanks
sadat007
After installing Pocket Talk and configuring it I get the message that my handheld device is blocking UDP port no 8000 and 5060. Of course it isn't but I can't make callas. Has anyone had the same problem?
installation unsuccessful
It fails to install for me...
I connect my HTC Mega (Windows Mobile 6.5, moded rom), I start the setup, my phones screen shows the installer but than says "Installation of NCH Swift Sound Pocket Talk.CAB was unsuccessful"
Doesnt matter if I choose MainMemory of StorageCard.. there is plenty of free space on both of them.
Any Ideas? Are there any prerequisites? I checked the NCH forum but couldnt find any help...
PS: trying to install directly from the .cab it leaves on my storage card wont work either
Hi sorry for my bad english, setup doesn't work on my hd2 why???
Franky24 said:
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
Click to expand...
Click to collapse
Myself some hours ago said:
I'm also using WMVoIP and my phone is enabled by default to use VoIP when wi-fi gets enough data traffic, so I don't need other VoIP apps except for second lined. Usually I switched off the phone radio and whitched on the wifi radio and VoIP wasd enabled as default phone line.
But my problem is now I can use VoIP over 3G at no penalization from my phone provider, and I can't set my phone to use VoIP by default.
Is there a way to set VoIP the first option and phone the second one, using 3G (not wifi) ?
Click to expand...
Click to collapse
Editing: I found this xda-dev's app here: http://forum.xda-developers.com/showthread.php?t=730303 and it works fine with one SIP line, in my Kaiser, even using 3G instead of wifi.
Thanks !
It works fine on my HTC Touch Pro cdma with wm6.1.
But I don't like the fact I can't use my original contact list...
Hey Guys,
Im wondering what would be better for me, Im based in the UK and I want to know if Using a VoIP Service such as Skype or get a Dedicated Phone line put into my address? what do you guys think?
- David Scheme