Related
Hi everyone,
I would like to kick start a thread for any application installed in the latest SE rom by mystery man. The rom seem stable nevertheless some apps seem do not really prepared for the changes. (i mean from WM2003 to WM2003SE). Let begins........
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Will continue to report.......
Best Rgds... :lol:
Wisbar advance freezes and requires soft reset after telephone has been used/or whilst attempting to dial.
XCPU Skalar - you have to update to version 3.85, lower version keeps system to hang
Tillanosoft Pockettweak - update to 4.2.7, lower version destroys font settings
PocketZenPhone - update to latest beta 11 version, older versions are not able to switch phone on again
Can someone tell me what is the function of "Today timeout" which constantly showed 4hrs at Start-Setings-Today?
Well why must that function included in the today settings? The problem is now and then my today screen showed nothing or clean even though i unchecked the Today timeout box to disable it.
After all i suspect something is not right wif the Today timeout option and nothing to do wif Battery Pack.
Anyone experience the above problem? :roll:
Calligrapher 7.4 (just only 7.4 ,older not has this problem)
after i install and use for 15 sec. ,then screen is locked up cannot tap anymore but Button still work.
I do soft reset and disable it then 15 sec ,screen lock again.
Only one way to solve it by using cradle sync with desktop and select remove calligrapher and then soft reset ,it will work normally again.
It may from defect in version 7.4 or conflict with XDA II.
PLease take care ,if you decide to use this version
Problems with SE (both dcs's & mysteryman)
Hey there guys!
I used this weekend (in fact starting friday evening) to upgrade my T-Mobile MDA2 from ROM 1.72 (radio 1.14) to ROM 2.xx and radio 1.18.
Although I did a lot of reflashing up to now - I want to thank you all guys for this forum, because everything I've learnt about my PPC is from here. It is shame that I cannot contribute via paypal because Bulgaria is not included in their country list.
Now.. Here is what I've experienced with my mda:
I upgraded from 1.72 T-Mobile WWE to 2.02ti... All cool - until I started to load the device with programs. I mean - it is cool and fast and nice and colorful..
A guy mentioned that SE boots faster - I can's say that - the phone would show the first boot picture, then fast will change to 2nd and then (in 2 to 5 seconds) the bluetooth led will flash (if at all) at least 5 times and then it shows the today screen or will stay there forever :-(
I understood that:
* xscallar 2.8x would not work - it freezes the system;
* sbp pocketplus 2.1 would hang the system or/and the today screen;
* sprite backup 3.0 hard-resets the system (3 in 2 times after finishing scheduled/normal backup);
* gprs monitor 2.12 would hang the today screen;
* cleartype is a way worse than in 1.60wwe
* if the system works, compared to 1.72 - it is flying! but :-(....
These problems appeared both in 2.02ti and in 2.06, no matter what extended rom I install (if I install any at all - because thru tears I tried that one too ;-) )
The (X) sign for closing programs disappears constantly and some programs could not be closed or [ok]'d :-(
Bluetooth 1.5x would either not work properly or would not work at all.
about the extended rom - i noticed this:
MMS15024_WWE_Hima_OzUp.sa.CAB, despite the lower version compared to MMS2.0.0.13 incorporates in the outlook folder and doesn't take additional space in the today screen. Also it provides sending restrictions as 100K, 200K, MAX - ;-) which is kewl 'cause I missed the ability of my SonyEricsson P900 to send unlimited in size MMS messages.
CallerIDB10, provided with 2.x SE versions cuts about 4 pixels from the bottom of the CLIP pictures and I don't like it - it has no new features or anything
For conclusion:
I liked the look of SE versions - it is really neat and fast - when it works.
But non of my really needed sofware would work as expected.
I went back to T-Mobile 1.72 (edsub's version) and I will tell you guys - there is nothing as stable and fast as it is.
This is my first post here, and I read this forum for more than 8 months. You guys rock!
Yours,
Dean
gerald8297 said:
Hi everyone,
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Best Rgds... :lol:
Click to expand...
Click to collapse
I had a big problem with 2.06-mystery man . Stuck on the every second
boot . So I had to do Hard Reset all the time.
After that I switched to 2.02 and all I can say its the most stable ROM
I know from 1.60 .
The reason I am posting here is :
NO PROBLEM WITH Battery Pack Pro v1.11 on the ROM 2.02.t1WWE .
sprint said:
I had a big problem with 2.06-mystery man . Stuck on the every second boot .
Click to expand...
Click to collapse
I've notices that 2.06 sometimes freeses during boot when SD-card is inserted. It boots normally when SD-card is out and inserted when device finishes booting.
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Probably
Probably , probably , probably
Spb PocletPlus 2.1 is stable in my 2.06SE. The problem i encountered is the unstable widcomm bluetooth stack ( 1.5.0.801 ) which always "could not correctly initialized - BTTrayCE.exe) . can some one post some registry tweak for this?
@ mamaich
can you post the MS cleartype tuning tool please? thanks! :lol:
Phone Profiles is another one....
Using Phone Profiles 7.5 or 8.0, there is a dialog on reboot, 'Can't Find Window", (something like that), and it will not continue booting, only solution is a hard reset...
I can confirm the Calligrapher 7.4... will lock during boot, hard reset
mamaich said:
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Click to expand...
Click to collapse
Pls do so. Many are anticipating.
Thanks for the good work!!!
:lol:
Here is Microsoft Cleartype Tuner.
mamaich said:
Here is Microsoft Cleartype Tuner.
Click to expand...
Click to collapse
Thank you!!! So is this file will refine the ugly font of WM2003SE lanscape Cleartype?
working good mamaich!
still my widcomm BT stack cannot restart once in awhile..any tweak on this?
Tnx.
sprint said:
I had a big problem with 2.06-mystery man . Stuck on the every second
boot . So I had to do Hard Reset all the time.
Click to expand...
Click to collapse
Mine is working fairly well... I did notice the same problem you have, but I got around it by holding in the reset button until it reset itself (normally 5 secs or so). It resets fine every time. This is a pain compared to 1.66.00WWE. I haven't tried 1.72 yet. I would like to persist with the 2.06 version to see what bugs it has.
Recrem...
UPDATE:- Installing XCPUScalar Version 2.85 has completely cleared up the reset hang problem. I have configured it to auto start on soft reset, and minnimise on start. I have now reset well over 10 times and it resets as it should. I have XCPUScalar set to a min speed of 400MHz though...
I have only one problem with wm2003se 2.06 - at every call speaker mode turns on automaticly
mamaich said:
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Click to expand...
Click to collapse
Thanks man ! the tuner is great but still the font is bad in 2.02t1 it was much better with 2.06 but i changed it because it get stuck on reset!
could you please post the clear type file from 2.06?
thanx in advance :wink:
gerald8297 said:
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Click to expand...
Click to collapse
Yeap i encountered this problem too. Any solution so far? Or shall i reflash my rom to dcs one 2.02? Would it solve this problem?
Anyone pls HELP......
My list of problematic programs in SE
1. Mamaich's "Contact Button", which I miss dearly.
2. Pocket Zen Phone.
3. BTtools freeze Today screen. (not needed for functional purposes, only used to turn BT off automatically)
4. Still have to use EzWAP for MMS
5. Camera switch screen back to Portrait.
About
If you need turn on WiFi, you have to press at least 4 keys by default to start WiFi (using Comm Manager).
After installation of WirelessToggle, just press and hold Comm Manager button to toggle Wifi (on/off). (Alternatively you can use attached exe and assign WirelessToggle to any button / shortcut you want to).
And as always: There are few more programs that can be used for faster turning on/off WiFi but this keeps the RAM free as much as possible.
Installation:
WirelessToggle.cab - just install
Run WirelessToggle.exe (from \Program Files\smartmadsoft\WirelessToggle) manually (just once) before using the shortcut (otherwise you wont be able to confirm dialog window asking you about running unsigned code)
Download:
WirelessToggle.zip (4 kB)
Support:
Tested only on S730 but it should work on other devices as well (will test it later).
i have been searching for a program like this for weeks now, thanks!
btw, it works great on my MDA Vario 3
Dost dobry!
Works fine on HTC TyTN II - kaiser
work on hp ipaq 514 thnks
Kaiser, WM6 (Dutch)
Doesn't seem to work.
BTW: We don't have a \Program Files-folder but a \Programmabestanden-folder ...
Sorry to bump this post but this app is so handy thanks so much for the share works great on my htc prophet 6.1
Does not work on my glofiish x500 Wifi switches ON, but after a few seconds switches OFF. Is it possible to fix that?
Thanks a lot! I have also been looking for this for ages... Unfortunatly, I'm not a native english speaker and didn't know the word "toggle" until recently, which complicates search
Works fine on my SE X1 with rom Jack V5 full (WM 6.5)
Great release but I found some bugs:
1.
When I hang up an incoming call on my bluetooth headset the customised ringtone is back to standard????
2.
When I hang up an incoming call on my bluetooth headset the volume is set to zero and I have to manually turn it back on....
3.
Wifi is not working with my current radio 1.57.00.
Cheers and any fixes are welcome,
HJ
All of the above problems are still here after a hard reset......any suggestions?
I have the problem that the icons in the sms/mms textmessage not work. Realvga is a just in 96 dpi. By other DPi standaards i don't have that problem I have no problem with other things.
Media Player hangs the device if try and start it
96dpi
guido oskam said:
I have the problem that the icons in the sms/mms textmessage not work. Realvga is a just in 96 dpi. By other DPi standaards i don't have that problem I have no problem with other things.
Click to expand...
Click to collapse
I believe this is a known issue with the RealVGA App.
Cheers
BR
Brau0303 said:
I believe this is a known issue with the RealVGA App.
Cheers
BR
Click to expand...
Click to collapse
Oke it's a problem with realvga. what can i do abou it. where can i find the icons. Maybe i can replace them
Before reporting bugs, please ensure you're on the new ROM then hard reset. You should perform a hard reset regardless of bugs or not to avoid some issues. Hope this helps some. Also, please update your posts and let others know if you actually did a hard reset after flashing and confirming the 4.0 installation or if the bug was discovered without doing the hard reset.
hellejoep said:
Great release but I found some bugs:
1.
When I get a call while my bluetooth headset is connected it is only transferred to the headset if I pick it up on my bluetooth headset; if I pick it up on my Athena it is transferred to the speakerphone.
HJ
Click to expand...
Click to collapse
its supposed to be like that. it assumes that if you are answering it from the phone and not the headset then you don't want the headset.
Small things:
-No automatic softreset after HR configuration. Is this normal, or is this aborted because of No SIM-Card screen (cancel)? Did HR with SIM Card and still no automatic Softreset like usual.
-Device popups (start menu) do have a small delay. Is this normal?
EDIT: No wktask problem
ltxda said:
Before reporting bugs, please ensure you're on the new ROM then hard reset. You should perform a hard reset regardless of bugs or not to avoid some issues. Hope this helps some. Also, please update your posts and let others know if you actually did a hard reset after flashing and confirming the 4.0 installation or if the bug was discovered without doing the hard reset.
Click to expand...
Click to collapse
Done, see the results in my first post.
ltxda said:
Before reporting bugs, please ensure you're on the new ROM then hard reset. You should perform a hard reset regardless of bugs or not to avoid some issues. Hope this helps some. Also, please update your posts and let others know if you actually did a hard reset after flashing and confirming the 4.0 installation or if the bug was discovered without doing the hard reset.
Click to expand...
Click to collapse
I have done a hard reset. The icoons do work with 192dpi. But i prefer 96 dpi. I hope there is a solution
PAPPL said:
Small things:
-No automatic softreset after HR configuration. Is this normal, or is this aborted because of No SIM-Card screen (cancel)? Did HR with SIM Card and still no automatic Softreset like usual.
-Device popups (start menu) do have a small delay. Is this normal?
EDIT: No wktask problem
Click to expand...
Click to collapse
the no softreset is a new feature. i cooked in EVERYTHING.
the delay could be because its loading the new enlarged start menu. if u dont mind that then leave it. if u want the regular menu in settings ull have the turn off or in the config app.
PAPPL said:
Small things:
-No automatic softreset after HR configuration. Is this normal, or is this aborted because of No SIM-Card screen (cancel)? Did HR with SIM Card and still no automatic Softreset like usual.
-Device popups (start menu) do have a small delay. Is this normal?
EDIT: No wktask problem
Click to expand...
Click to collapse
The "No Reset" after customization is Normal for this release there is a reset after the carrier settings however.
Cheers
BR
First impression? amazing even if wifi isn't working and media player crashes it.
Made a hard reset immediately after, radio 1.50, x7500, 96dpi, xp pro sp2.
I'll come back if i have more issues.
Officially now, as activesync and bt8010 declare, i have an x7510
Thank you all girls and boys
guido oskam said:
I have done a hard reset. The icoons do work with 192dpi. But i prefer 96 dpi. I hope there is a solution
Click to expand...
Click to collapse
thats one of the issues with 6.1 and realvga. we need to get tobias to fix them unfortantly.
theobabis said:
First impression? amazing even if wifi isn't working and media player crashes it.
Made a hard reset immediately after, radio 1.50, x7500, 96dpi, xp pro sp2.
I'll come back if i have more issues.
Officially now, as activesync and bt8010 declare, i have an x7510
Thank you all girls and boys
Click to expand...
Click to collapse
i wonder what would happen if u turned off htc home before starting the media player. try that and report back. wifi cmonex must fix.
Pawel062 said:
i wonder what would happen if u turned off htc home before starting the media player. try that and report back. wifi cmonex must fix.
Click to expand...
Click to collapse
What would be best to do; sent cmonex a pm?
hellejoep said:
Great release but I found some bugs:
1.
When I hang up an incoming call on my bluetooth headset the customised ringtone is back to standard????
2.
When I hang up an incoming call on my bluetooth headset the volume is set to zero and I have to manually turn it back on....
3.
Wifi is not working with my current radio 1.57.00.
Cheers and any fixes are welcome,
HJ
All of the above problems are still here after a hard reset......any suggestions?
Click to expand...
Click to collapse
were you able to find a solution for problem 1 the issue with the ringtone being set back to default ? i am going through the same thing!
Skype
Under AP4 could not start Skype. Internet connection ok.
anyone with wifi issues
I want to ask you a few questions
- does the wifi totally refuse to turn on?
- if yes, then, when flashing AP4, did you have an interrupted flash? in this case, please describe me exactly when the interruption happened and how.
also, in this case contact me on IRC at http://java.freenode.net/ (channel name should be xda-devs, and pick a nickname as well). but a program will soon be available to make the fix easier and it can be published so I won't need to help personally.
- if it does turn on, then just check your wifi settings, you set up something wrong.
Issue: dealing with menus.
The issue is when I open a menu, by defult I should be able to press certain bottons on the keyboard in order to choose certain options. For example, when I attempt opening a video in TCPMP I would press file on the screen then press the letter "O" from the keyboard in order to access the option "Open".
It doesn't work in AP4.
Hardrested after the update.
Hi,
Just received a TG01 as insurance replacement for HTC Touch HD (none in stock) on Orange and getting used to it, for better and worse...!
One vital thing I keep finding is the connection sometimes switches to using 3G when I am connected to wifi. On the HTC, it was a simple case of using Comm Manager and turning off the Data Connection. On this phone, the connection manager just has 'Phone', 'Bluetooth' and 'Wifi' - and they're either on or off. The 'Phone' option turns all the functions of the phone off, including the data connection, but it's not exactly ideal.
The phone is running WM6.5 - the comm manager doesn't look very Microsofty so I'm guessing it's a bad Toshiba add in.
Any help getting something decent and easy working would be appreciated!
Pat
patc said:
Hi,
Just received a TG01 as insurance replacement for HTC Touch HD (none in stock) on Orange and getting used to it, for better and worse...!
One vital thing I keep finding is the connection sometimes switches to using 3G when I am connected to wifi. On the HTC, it was a simple case of using Comm Manager and turning off the Data Connection. On this phone, the connection manager just has 'Phone', 'Bluetooth' and 'Wifi' - and they're either on or off. The 'Phone' option turns all the functions of the phone off, including the data connection, but it's not exactly ideal.
The phone is running WM6.5 - the comm manager doesn't look very Microsofty so I'm guessing it's a bad Toshiba add in.
Any help getting something decent and easy working would be appreciated!
Pat
Click to expand...
Click to collapse
Hi Pat: Wellcome to this TG01 Thread (even for few days I assume )
Anyway, I use the famous app Modaco's NODATA
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
There is another app doing the same and more finger friendly here (but never tested):
http://www.modaco.com/index.php?s=&showtopic=246171&view=findpost&p=1265802
You can try both and review here , if you agree
By the way, as a accidental TG01 user, could you please compare features with your HTC Touch HD? Thank you in advance!
Thank you for the helpful response and welcome
I've tried both apps - the first one only disables connections in a sort of semi permanent way and says you have to manually stop any existing connections when you turn them off - the point is, I can't manually stop the existing connections, that's what I want an app to do, and what Comm Manager used to do!
The second one complains about the .net framework and refuses to run, even though I have the latest redistributable on there, having windows mobile 6.5...
So I'm still a bit stuck.
I will post a comparison when I get the chance
You are welcome! That's a bit odd. I've been using NODATA for ages, on mi former device and now on TG01 under WM6.1 and WM6.5.
You have to be off data (not connected or only wifi connected). Then you ENABLE of DISABLE each mobile connection with the soft key "Toggle" and that's all. Which ROM do you have? Does somebody else have problems with NODATA?
Hi everybody,
I'm having problems with nodata on myTG01 (Evealex V5 ROM).
As soon as I launch it, it gives me an error message.
It used to work great with the second original toshiba ROM.
Please, help me !
Install attached HTC comm manager.
and do the following for Wlan:
Go to key in registy "HKLM\Software\Drivers\WLAN" and copy the value from 'AdapterName" string. Now go to key in registry "HKLM\Software\HTC\CommManager\WLAN" and edit "DeviceName" string. You see there value like this: "{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETW12511". Delete the last part of this value ("TNETW12511") and past the value "AdapterName" which you copy at end. Make soft reset and that is all. Now Wifi button on your device should work properly
Hi guys, I have the following problem with a tg01.
The Wi-Fi don`t want to turn on at all. When I try to start it, I got that loading wheel for a few seconds, then it is gone and the Wi-Fi is not turned on. Is it look like a hardware issue and can I confirm that it is a hardware failure? The phone belong to a friend of mine. At first it was running some French version of WM, dont know which one exactly. He says at this point everything was working fine. Then some "gsm guru" hold the phone for a month trying to flash it with WWE version and he got it back with WWE WM 6.1 but the Wi-FI and the GPS was not working. I took the phone trying to help. I flash it with ROM_TG01_29017_Shell_WWE - WM6.5
The OS is working nice and smooth, the GPS is back and working fine, but the Wi-Fi is still gone... so any sugestions how can I 100% confirm that it is a hardware issue?
Thanks in advance.