Related
i could hack Radio rom from Cinglar,and make Flashable file.
2 of them,,Version 1.10 and 1.16 were tested on my VarioII.
i tried to upload them onto xda-FTP many times but fialed.
so i uploaded to my FTP for you guys.
instruction of upgrade also there.
Please got to get them if you interested in.
http://asukal.net/blog/2006/09/radio_upgrade_hermes_form_cing.html
Good luck
Asukaly yours!
WTF! This is _VERY_ good news!! :shock:
How did you manage to cook the type 2 radio rom??
Is Ma_Upgrade_NoID working with the hermes bootloader?? AFAIK the bootloader lacks wdata command... (replaced by 'wdatah')
Is it that you need only rwdata but not wdata to flash radio?
An explanation of the process to create the working nbf out of the extracted .nb files would be very useful!
Thanks!!
EDIT: I uploaded the files to xda-dev FTP and make a new wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Thanks for the new Radio update. Just updated my MDA Vario II. Will test if there's any improvements!
Seems to work like a charm!
ROM 1.18.255.3
ROM date: 07/22/06
Protocol version: 32.53.7018.01H
Ext ROM 1.18.255.106
Radio 1.16.00.00
And my Bootloader remains at V1.04 :!:
(I'd have pasted a bitmap, but I couldn't figure out how!).
Major kudos to Asukal!!!!!!!
Now if we could only find a new TyTN System ROM to go along with this spiffy new radio...
super Asukal, great news!!!
about the screen alignment problem, if you have some free time, could you please translate whats is the problem and how they do to fix the screen alignment problem please
http://inuchanbt.blog54.fc2.com/blog-entry-86.html
thanks you so much Asukal!
I am receiving country id error : 120 while attempting to upgrade the radio from Cingular 1.31 ( radio 1.13). Even when i ran the upgrade second time device seems to go into radio update screen but just sits there and doing nothing.
then the radio updare error comes up. following the soft reset I have checked device information and radio version is still: 1.13
device is HTC TyTN, originally shipped with Italian ROM.
any ideas?
@superduper: I guess you need a 1.04 bootloader to perform the radio only rom upgrade from Asukal, but your current rom has bootloader 1.06
Let's see if anyone else with Cingular 1.31 rom can do the radio only upgrade or has the same problem you reported...
@Asukal: please give us details on how you did to extract the "radio_.nbf" from shipped Hermimg Cingular NBH file
this is super excellent. Now all we need is a rom image update then we can make our own aku 3.2 version.
Good job Asukal.
vua777 said:
super Asukal, great news!!!
about the screen alignment problem, if you have some free time, could you please translate whats is the problem and how they do to fix the screen alignment problem please
http://inuchanbt.blog54.fc2.com/blog-entry-86.html
thanks you so much Asukal!
Click to expand...
Click to collapse
he did ...pls see a picture
Summary to extract and convert nbh, pls wait a while.
i will make report after finish all my project of this,
now i am trying to flash Only Splash, and only OS, only Extrom separately.
PLS patient!
and thanks report guys!.
if no_id_upgrade can not work on Bootloader 1.06,
can u try with Hermes Upgrade.exe with this nbf?
(you must remove nbh before that, i didnt try that so i am not sure it work or not) :?
thanks a lot Asukal!!!
no luck. file open error : 240 :?
Asukal said:
if no_id_upgrade can not work on Bootloader 1.06,
can u try with Hermes Upgrade.exe with this nbf?
(you must remove nbh before that, i didnt try that so i am not sure it work or not) :?
Click to expand...
Click to collapse
Is it any better?
So, a question for those of you who've done the upgrade - does it make any difference you can notice? Just wondering if it's worth doing the upgrade at the moment, or waiting for new HTC rom when it finally appears.
Tried this on a Orange M3100 with the 1.31 Cingular ROM, but it doesn work. Just sites at 0% and then you eventually get an error. Seems like you need bootloader 1.04 for this to work...
are there any improvements using these new radio roms? also, what's the difference between 1.10 and 1.16?
thanks
I wasn't having any radio problems previously, and so far, I haven't seen any issues with 1.16, either.
Bluetooth works fine, UMTS/GSM calls work fine, WLAN works fine, and UMTS data works fine...
If I see any strange behaviors, I'll be sure to point them out...
Asukal said:
Summary to extract and convert nbh, pls wait a while.
i will make report after finish all my project of this,
now i am trying to flash Only Splash, and only OS, only Extrom separately.
PLS patient!
Click to expand...
Click to collapse
Aaaaghhh! I can't wait
Please tell me if this process is correct to create the radio_.nbf:
Code:
nbh2dbh.pl HERMIMG.nbh HERMIMG.dbh
dbhdecode.pl HERMIMG.dbh
alpinenbfdecode.pl -e ./GSM.nb radio_.nbf
My radio_.nbf and yours differ, is it because of headers?
Thanks!
Just tried the procedure on mine.
Hardware = Dopod 838Pro
ROM = imate
Upgraded to radio version 1.16, the procedure worked fine! Except that after the flashing was complete the PC displayed "upgrade failed" but after a soft reset of the PDA, it worked.
You did a great job, Asukal!!!
I can see some improvement that I can see more wireless bar on my title bar after I upgrade radio ROM.
Thsi is cingular ROM, so I don't know somebody who lives outside US can see this improvement, but I can see it in my rural US state.
In addition, as you said, I can see OS runs smoothly than my original ROM.
I was usually stuck when I run "menu" or "button" applet in control panet. But after I upgrade to Radio 1.16, I don't have it.
I don't know why, but it is real.
I appreciate your effot!!
works great, thanks..
guys who can not flash Radio
One of my friends try to flash 1.16.and faild in that.
But could flash 1.11.
then tried 1.16 again, finally he could flash 1.16.
Please try this step.<this is not to guarantee can do, just a possibility>
And i will prepare 1.13 also soon.
Only one short question! -Only one short answer! ;-)
I´ve flashed my hermes to the 1.35 radio rom. Now iam getting these ****ty
radio waves signals out of the hermes´s earspeaker . And it is possible that i have to send in my device, because i have several problems with sending sms. Because of these things it would be very nice if it is possible to flash back to the shipped version of the Radio Rom(1.27.00.00)
I tried to flash back with
RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe
and it completed succesfully but on the hermes is still the 1.35 Version of the radio rom.
THX
You will need the sspl version of the installer. It can be downloaded here.
hmm, so i took the wrong radio ROm version?
on this site:
http://forum.xda-developers.com/showthread.php?t=291827
i took the first one because i have a herm300 from t-mobile.
So i only have to flash with the version you gave me, and thats all?
Update radio without Activesync connetion
Can I update this rom version without any activesycn connection. My HTC TYTN is hang out after rom dwwongrading and now it start unitl windows loading screen. I think that only alternative is download new rom with help of three colour screen usb connetion or with help of mtty program. My bootloader version is 1.09
Please let me know your opinions,
Juha
@Miliano: you are correct. The sspl download for v1.27 was created by wpbear.
Unbelievably, I found the link for you by looking in the Hermes WiKi....
@frontpage: sspl based flashing won't work unless windows mobile can load
hi guys, I flashed my mogule few days before, but it failed. I try to flash it by TF CARD and
USB cable, when I update rom by USB cable, it shows
ERROR [270] : UPDATE ERROR
The image file is corrupted. Please check your Update Utility.
when I udapte rom by TF CARD, it shows
0018003
TITAIMG.nhb - FAIL
OS - Fail
Update Terminate
UPDATE FAIL
I can flash radio alone successfully, but when I flash Hard-SPL 2.40 alone,it seems finished,
but in the red - green - blue screen it shows
TITA100
SPL-2.47No2Chem Titan SPL EVT
CPLD-9
I think it does not work, I can't flash any rom (include sprint offical rom) with OS now, it will be failed,
what should I do? thank you.
Try this file.
http://forum.xda-developers.com/showthread.php?p=1940731
It will help you get out of the bootloader.
Remember, you have to downgrade your loader to get the radio to load. There is not a ROM Update Utility Compatible with the new radio yet.
I'm not sure which ROM you are trying to load, or which radio, so I can't help you too much there.
The information is in the wikis if you read them all the way thru. Then read them again. Then read them again. And the dudes making the roms include any special instruction in the threads.
Thank you very much
I plan to load DCD' rom 3.2.2, Radio 3.42.30. I'm cooking customized ROM by DCD's Kitchen v3.2.2. Can Titan-exibl.exe help me remove bootloader(SPL 2.47 No2Chem) from Mogul? or downgrade the SPL from 2.47 to 2.40?
Before I load DCD' rom 3.2.2, I want to flash RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship.exe at first.
Nope. All it does is kick you out of the bootloader so you can start over.
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Da_G said:
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Click to expand...
Click to collapse
Removed the SD and it stays at the tricolor screen with the spl version as mentioned in 1st post.
Also, displaying the Upgrade ROM code error, please try again message
The mode is currently serial
What can I do from here?
fireblade63 said:
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Click to expand...
Click to collapse
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
NotATreoFan said:
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
Click to expand...
Click to collapse
Hey man, thx for stopping by..
If I understand correctly, SSPL runs through the device which is stuck at bootloader currently... or am I hopefully wrong??
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Da_G said:
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Click to expand...
Click to collapse
Keep in mind im currently on stock SPL, do u think flashing the stock ROM is ok?
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
dude....i hate to say this...butyou might be s.o.l. at this point. i did the same to my fuze not too long ago... tryingto flash anything to the phone just locks it up.i was lucky enough to bs my way through an att guy to get me a new one (was still under the 30 day warranty).
Da_G said:
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
Click to expand...
Click to collapse
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
I had the same problem as you and could not flash any rom, Always get Invalid vendor ID.
You need the right Stock Rom to flash and in my case in the middleeast, the Stock Rom is so far only available in at HTC.
I had to take the phone to HTC Service Center and they flashed the correct Stock Rom and charged me as they did it out of warranty.
Regards
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
fireblade63 said:
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
Click to expand...
Click to collapse
Post in the HardSPL thread asking which ROM the SPL originated from. Once you know that, you can download the appropriate ROM from the Wiki.
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
shafez said:
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
Click to expand...
Click to collapse
The CID is determind by the SPL.
Look up the error code posted... everything points to HardSPL. Back in my Wizard days, HardSPL did not exist, and we just did a CID unlocking. This is not the case with newer devices.
All ROMs are not created equal. Each WWE ROM checks for specific information within the SPL, and if it doesn't find what it's expecting, fail...
stepw said:
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
Click to expand...
Click to collapse
I'm not sure
Where can I know that?
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
fireblade63 said:
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
Click to expand...
Click to collapse
Since you cannot get past the bootloader, your only option is to find the WWE ROM that matches the SPL you flashed. Even though the HTC ROM Tool "signs" the NBH file, it still won't fool the stock bootloader... if it did, we wouldn't need HardSPL.
[SOLVED] Just Flashed the correct official ship rom from HTC site using my HD2 Serial Number... It works like a charm. SPL has downgraded to 1.46
Thanks everyone who helping...
Just Flashing Stock Rom RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe, I got stuck in bootloder.
- Error 294 Invalid Vender ID
- SPL 3.03.0000 can't HSPL-ed with HSPL3, SPL 3.03 is't listed as supported SPL
Flashed RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe, still stuck on bootloader.
- Error 294 Invalid Vender ID
- SPL 3.03.0000
- on boot loader screen said: Update fail code error, please try again
Try to get stock rom from HTC official site, but no rom suitable for S/N I entered.
Need help, is there any workaround for it?
Thanks
Edit 1: I Tried this one http://forum.xda-developers.com/showthread.php?t=606713 but also not working...
Edit 2: I visit again this site http://www.htc.com/sea/SupportDownload.aspx?p_id=297&cat=2&dl_id=1063 and put my Serial Number and it has the Official Rom for my S/N (yesterday maybe i put the wrong letter or number), downloading now, let see how it works...
Same thing happening on mine too.. Not able to downgrade stock spl 3.14 to any other lower spl. i tried flashing various shipped roms with spl 1.66, 2.07, 2.10 etc.. no luck.. Does anyone know what to do for this problem???
same issue, been trying to get it back for days. i think my problem is the radio, i can'r get it to reflash now.
brizzo said:
same issue, been trying to get it back for days. i think my problem is the radio, i can'r get it to reflash now.
Click to expand...
Click to collapse
hi guys , u need download ur original room ( stock room ) and flash in normal way . after that ur spl is 1.66 or 1.42 depend ur network , after that u ready to upgrade with the rom u want .
Hello to everyone, the problem you mention isn't related to the stock ROM 3.14 but are related to the users who are flashing a non compatible aria ROM.
So my instructions to you are the follow use the stock rom that came from your aria; download the right stock rom from the HTC webpage by using YOUR S/N.
Moved thread to the right section.
yep tried that, flashed RUU_Leo_Vodafone_DE_1.72.162.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
i ran it from the sd card and everything said ok but still only loads to tricolour bootloader. i think it has something to do with the radio...won't update from RUU (been using LeoAdvancedRUU 1.03) or sd.
think i'm screwed...
Hi All,
I was facing this same issue for a long time with respect to the 3.03 ROMS.... Yesterday while searching for a solution, I found a website which hosts all types of Shipped ROMS ever published... Just select the ROM belonging to your region from there and Flash it... that will downgrade your SPL to the lower versions... (I personally flashed the 1.48 series ROM for INDIA which is available in that list and now am using WP7 ROM by DFT.... )
Hope this Helps !!!! CHEERS !!!
Please find the URL for India 1.48 series ROM below
P.S. You will find all roms on this website... just do a Ctrl+F for your country on the list of the ROM page.
LINK
brizzo said:
yep tried that, flashed RUU_Leo_Vodafone_DE_1.72.162.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
i ran it from the sd card and everything said ok but still only loads to tricolour bootloader. i think it has something to do with the radio...won't update from RUU (been using LeoAdvancedRUU 1.03) or sd.
think i'm screwed...
Click to expand...
Click to collapse
Dont give up man... as long as your HD2 can enter the bootloader its still can be saved...
i am going to try goldcard but i think i have a hardware problem...i'm getting I2C error.
googled it and i'm pretty sure it is going back to the shop. anyway thanks to everyone for your help!