Related
Ok, I have spent the last few days looking through the forum for help in installing the Cingular/AT&T update that is on HTCacmerica's website.
The directions have you connect via ActiveSync in the second step which I did. The installer finds my 8525 and finds the correct ROM version.
In the next step it finds the new ROM version in HTC's installer.
And then it is ready to install the new ROM package to the device. Immediately it turns the screen blank, then the Active Sync program is closed, and finally after about a minute it says it cannot connect to the device.
I have rebooted both the PC (WIndows XP) and the 8525 multiple times.
I have not had any corruptions of the current ROM since it never actually starts the installation process.
I know that there are other cooked ROMs available and in the future I may decide to go down that road.
Thanks for any insight.
HD
P.S.
This site is awesome, when I have worked a little more on the Net SDK and written some apps, will post them here.
HemisphereDancer said:
Ok, I have spent the last few days looking through the forum for help in installing the Cingular/AT&T update that is on HTCacmerica's website.
The directions have you connect via ActiveSync in the second step which I did. The installer finds my 8525 and finds the correct ROM version.
In the next step it finds the new ROM version in HTC's installer.
And then it is ready to install the new ROM package to the device. Immediately it turns the screen blank, then the Active Sync program is closed, and finally after about a minute it says it cannot connect to the device.
I have rebooted both the PC (WIndows XP) and the 8525 multiple times.
I have not had any corruptions of the current ROM since it never actually starts the installation process.
I know that there are other cooked ROMs available and in the future I may decide to go down that road.
Thanks for any insight.
HD
P.S.
This site is awesome, when I have worked a little more on the Net SDK and written some apps, will post them here.
Click to expand...
Click to collapse
Try putting it in bootloader mode first. Push AND HOLD left side OK Button and Power Button and at the same time soft reset with stylus on bottom hole....when you get three color screen then plug in USB and exe the file on XP.
If the above suggestion doesn't work, try another USB port, and make sure you are plugging into a direct USB not one that goes through an external hub.
Thanks
I will try that and post back. I was using the USB connection on my monitor which I think may be similar to a hub. Will try it through a direct connection and then if that does not work will put it in bootloader mode.
Thanks,
Hemisphere Dancer
HemisphereDancer said:
I will try that and post back. I was using the USB connection on my monitor which I think may be similar to a hub. Will try it through a direct connection and then if that does not work will put it in bootloader mode.
Thanks,
Hemisphere Dancer
Click to expand...
Click to collapse
Oh yeah that monitor hookup is BAD. Stick to the direct ports on the PC....even better to use a laptop with a battery and plugged in. Just think the disaster if your PC power went out in the middle of flashing.
if active sync doesnt work still, uninstall it and .net framework.
then reinstall both.
it worked for me.
Worked
Thanks for the help. The key was boot loader for me.
When you start the process from HTC and you leave the Hermes connected from the beginning it puts the phone into boot load mode. Then when it tries to connect to see your Version of OS it cannot find it, so be user that you are in fact upgrading.
The problem is the directions from HTC never say the phone goes into that mode. Once I did that it worked great and there is a lot more storage space freed up in this version. Thank goodness for that.
Thanks for everyone's help!
Hi.
I am a bit embarrassed about writing this, I never thought I would make a brick of my Prophet during “upgrades”...
But here I am, with a phone that don't want to sync with any computer after I accidentally pressed cancel on an active sync dialog box asking for setup with a new device, during upgrade to the latest Touch VIII. Have upgraded several times with several different ROM’s before, but this time things went wrong.
If I choose to start my device normally, it goes trough the HTC screen and stops after the Qtek (HTC in Norway) screen listing the different versions of the hardware…
When I restart to boot loader (Cam button + reset) the 3 colours turn up ok, but when I put an USB cable in the device and the lower, left part of the screen shows USB, active sync will not recognise any new device no matter what I do.
I can still find the Prophet when I go to properties on the computer, but somehow active sync does not care about that.
Are there any way to use a program at the host computer to sync properly with the Prophet?
I would really appreciate any help that could rectify this problem.
Regards, Lars Norway
I believe the " WM6 Upgrade Guide" thread has the info you needed.
panda88 said:
I believe the " WM6 Upgrade Guide" thread has the info you needed.
Click to expand...
Click to collapse
Tried the info there without success...
The guide assumes that you have connection with ActiveSync, but I can not seem to get connection.
So, I really need some advice about how to make a connection to the computer I will make the programming from, when ActiveSync is not working properly.
Have tried to restart both the device and the host computer, have reinstalled ActiveSync, have tried to start the different roms without having a connection to A.S., but no luck...
Have realized my mistake and bought a new Prophet, but would still like to get the old one working again.
it has nothing to do with activesync.
Not sure u really understand the below statement from the thread I mentioned.
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
in case you can't NVID roms, you can still use those step1 roms mentioned by ROM gurus here.
panda88 said:
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
Click to expand...
Click to collapse
Well, the problem is that I am not able to connect...
As far as I understand, the only way to connect is by using ActiveSync?
Regards
connect = the cable between prophet and your pc. after that just run the rom update utility. just dun bother the activesync (does it sound logical to u to establish activesync in bootloader mode?)
OK, I have tried it, but will try on some different computers also.
Posting in a couple of hours.
Thanks for your help so far!
then wish u good luck. happy un-bricking.
OK, same as before.
Depending on which ROM I try, the following messages are the result:
Error [300]: Invalid update tool.
Error [274]: Connection (The update utillity cannot connect to your PDA phone.)
If I try the Touch VIII direct, it stops in Initializing for a while, and then a message appears with the text: Cannot connect to device, Would I like to try again?
Besides, in the welcome screen during the "ROMUpdateUtility_NV_G4.exe" in the Prophet_PV_Temp program, step nr. 2. asks me to ""Establish an ActiceSync connection with your PDA phone."
So, no change from yesterday yet...
are you using windows vistA???
Have only been using computer with XP Pro installed.
Anybody of the opinion that the connection tools built into Vista might do a better job?
hifiasylum said:
Have only been using computer with XP Pro installed.
Anybody of the opinion that the connection tools built into Vista might do a better job?
Click to expand...
Click to collapse
No, on the contrary. The best change you have is XP. Zeroed asked about Vista because it could be the reason of your troubles.
What I should do is just one detail different of what you have already tried:
Put the prophet in bootloader.
DISable "allow USB conection" in the conection-setting panel of ActiveSync
Connect your prophet with the USB cable
Run the NVID RUU again
If that is succesfull, you can upgrade to the WM6 ROM you like.
OK, will do.
Tried Vista just now, same errors and no luck.
Be posting in a minute...
OK, now I'm back.
Made a restart of the host computer, changed settings in ActiveSync, startet my device in Bootloader...
But unfortunately, no more success this time either.
Feel that the device must be more seriously defective/broken than others, this mishap happend at the end of the programming, when the 3 partitions were being written in the device. I was loading Touch VIII...
Anybody know if there is any more combination of buttons or reset methodes I could try?
Next step is to start opening the Prophet...
hifiasylum said:
OK, now I'm back.
Made a restart of the host computer, changed settings in ActiveSync, startet my device in Bootloader...
But unfortunately, no more success this time either.
Feel that the device must be more seriously defective/broken than others, this mishap happend at the end of the programming, when the 3 partitions were being written in the device. I was loading Touch VIII...
Anybody know if there is any more combination of buttons or reset methodes I could try?
Next step is to start opening the Prophet...
Click to expand...
Click to collapse
Sorry, I'm out of options...
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
hifiasylum said:
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
Click to expand...
Click to collapse
Just wondering if your computer detects prophet as a device at all? Does the normal plug device sound comes on when you plug in? Just a long shot, stick in a SD card and try with windows media player to see if it can sync or put files onto SD card. if so, get rom refreshed via SD card...
try few hard resets before you try this.
Not quite sure I understood what you suggested. I can get the device up in the host computers machine properties, but there is no way to get it up in any other program - like the Windows explorer.
Or are you saying that there is a way to boot the Prophet directly from a SD card? That would impress me!!!
hifiasylum said:
Not quite sure I understood what you suggested. I can get the device up in the host computers machine properties, but there is no way to get it up in any other program - like the Windows explorer.
Or are you saying that there is a way to boot the Prophet directly from a SD card? That would impress me!!!
Click to expand...
Click to collapse
This sounds dumb, but try restarting your PC, closing all apps running in background (including firewalls), restarting Prophet (with stylus in reset hole). DO NOT TRY TO USE ACTIVE SYNC. Boot into bootloader (Three colours screen), connect USB cable and flash QTEK lastest official, or Jesterz AKU 3.3 (I have found this ROM to have magical powers of unbricking.)
Good luck!
hifiasylum said:
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
Click to expand...
Click to collapse
Hmm this is wierd.I ran into problem earlier this month trying to flash a ROM but got stuck somewhere. So I followed the steps given in the sticky thread. Everything work smoothly. I am using XP SP2 and mine is a G3.
Let's make the assumption that your PDA is not faulty. Maybe you can try the steps again but this time :-
1. Change to another USB cable (or you may test the existing cable by connecting to a working pda)
2. Change to another USB port
3. Make sure you are not running any program that hogs the USB resource
4. If you are using USB hub, please don't connect using it. Make a direct connection to your computer.
that's all I can offer now...hope it helps.
i posted this in the hard spl sticky thread but got no responses so i thought i would create a new thread.
Been reading through the forums for 3 hrs. i read the entire unlocker thread. cant find any info on this.
i own a htc x7501. i performed a hard reset, connected device to windows xp pc. synced with active sync 4.5. everything connected, i can browse files on the device. device definitely connected.
i took out the sd card, sim card remains. windows xp computer has all updates and service packs and antivirus disabled.
i ran athena unlocker version 3, downloaded today from unlocker thread. click step 1, it loads the RUU, i follow the steps, says upgrading from image version 2.19 to Hard-spl. i click next, says now upgrading and shows the status bar at 0%. after about 10 - 15 secs, windows pops up on computer screen and says "error 202: connection. please make sure your device is connected to your computer, check the cable, blah blah"
tried mulitple times, each time restarting pc and device. device still works as before, nothing changed at all.
any ideas?
come on guys, anything?
someone has to have a clue
what do you see when you get into the bootloader screen. Get into the boot loader by pressing down and holding on the camera button while sticking your stylus into the reset hole for a good 5 seconds.
it says:
athe100
ipl-v2.02
ATHE100
SPL-v1.10.0000
i followed the tutorial video in the unlocker thread, and on the video when the guy done step 1, it asks to install something on the phone, enablerapi.cab by the look of the video. i never get this, just says "connection error"
thx for your reply Eaglesteve, appreciate it
This mean your flashing was not successful yet.
I think you should first reflash your original ROM back to restore it back to working condition again first. Then repeat the step and keep the finger cross this time.
You do this by first going into the boot loader mode, then connect up the usb cable, and run the RUU (RomUpdateUtility) program of your ORIGINAL stock ROM.
Edit: Sorry, did you say that your device is actually still working? Then you don't need to reflash the original ROM.
Do you have .net Framework 2.0 installed with the services packs on your XP machine?
i think there might be a misunderstanding.
the rom is untouched. i cant complete anything. here is what i did from the beginning. new stock phone. performed hard reset. went through customisations as per normal. stock rom installed.
plugged device into pc running xp. active sync, connected and synced. ran unlocker tool version 3. press step one, unlocker minimises and open RUU. says checking device for version details, finds them, says image version 2.19. great, that shows it can communicate with device. i click next a couple times, eventually it gets to the status screen that shows percentage of flashing and a warning at the bottom that says, "be aware this might take 10 mins" or something like that. about 15 secs, nothing happens, then new window appears saying "error 202: connection, please ensure device is connected, check cable/cradle"
i click ok, RUU exits, unlocker reappears, and says step 1 complete.
make sense?
PashaK said:
i think there might be a misunderstanding.
the rom is untouched. i cant complete anything. here is what i did from the beginning. new stock phone. performed hard reset. went through customisations as per normal. stock rom installed.
plugged device into pc running xp. active sync, connected and synced. ran unlocker tool version 3. press step one, unlocker minimises and open RUU. says checking device for version details, finds them, says image version 2.19. great, that shows it can communicate with device. i click next a couple times, eventually it gets to the status screen that shows percentage of flashing and a warning at the bottom that says, "be aware this might take 10 mins" or something like that. about 15 secs, nothing happens, then new window appears saying "error 202: connection, please ensure device is connected, check cable/cradle"
i click ok, RUU exits, unlocker reappears, and says step 1 complete.
make sense?
Click to expand...
Click to collapse
Yes, indeed I misunderstood. Please see my revised post above.
yes .net framework 2 and 3 installed plus all service packs.
PashaK said:
yes .net framework 2 and 3 installed plus all service packs.
Click to expand...
Click to collapse
I wish I could be of more assistance, but I'm not sure why your connection does not stay firm throughout the process. Perhaps you could PM Olipro for assistance?
yeah i might have to. i was thinking about trying it from a server 2003 machine, in case it is something wrong with my xp pc. i also have a vista pc but i dont trust vista enought to do it.
you think server 2003 would be ok to do it from?
thanx for helping a fellow aussie out
PashaK said:
yeah i might have to. i was thinking about trying it from a server 2003 machine, in case it is something wrong with my xp pc. i also have a vista pc but i dont trust vista enought to do it.
you think server 2003 would be ok to do it from?
thanx for helping a fellow aussie out
Click to expand...
Click to collapse
No worries mate.
Perpahs you want to try a newly installed XP machine? You know what it is with older machine. After a while all kinds of stuff goes in to corrupt it. I vaguely remember a post where someone who did not succeed with an XP machine later got it workign with another XP machine.
I think it is not possible for Olipro to anticipate all the possible conditions which might affect the program.
So, give it another go with a different, cleaner XP machine.
Good luck.
thanx, i might try that tomorrow if olipro has no other ideas. this is a newly formatted pc. i format quite regularly, being a network administrator, i keep all my pc's very clean.
i will report back my results when i get this solved.
thanx again
PashaK said:
thanx, i might try that tomorrow if olipro has no other ideas. this is a newly formatted pc. i format quite regularly, being a network administrator, i keep all my pc's very clean.
i will report back my results when i get this solved.
thanx again
Click to expand...
Click to collapse
Your cable has no problem I assume? Do you have problem doing ActiveSync in normal use?
the cable is the same one i got with the device. hardly used. everything in activesync works fine. i can browse files. install programs, everything works as it should, except the unlocker
I had a very similar problem when i tried to make the WM6 upgrade...
The reason for the connection failure:i had my Ameo connected via an external USB-hub.Which worked perfectly when i just wanted to synchronise or browse files...but when i wanted to make the upgrade i got the same connection error at exactly the same point.
Sticking the cable DIRECTLY into one of the PCs USB-ports solved the problem.
Ok,last night i tried the unlocker myself.
I put the cable directly into one of the ports of my PC...and got that connection error!
Tried to reinstall WM6-which,as mentioned in my post above had worked...still connection error.
Disconnectedt the USB from my pc,and simply put it back in a different port.
WM6 installation worked,and unlocking the phone afterwards worked,too.
No connectin errors anymore.
So this definitely is some sort of USB connection error.
Just try different ports.
Hey guys,
When I bought my Omnia 2 with WM 6.1 on it, it worked great but when I went and installed the stupid PC studio software that came with the phone I tryed to update and now my phone has either a thing saying
"DOWNLOAD MODE!
Do not turn off.
It takes about 10 minuites."
or it will have a symbol of a phone connecting to a "!" next to a computer symbol.
I can no longer use this phone if anyone can help me it would be very much appreciated.
Thanks.
hahaha to funny bricked means it no longer turns on meaning you don't even get the download mode. its just like a useless brick. But anyways to the problem at hand, there is only one way to brick the omnia and that is if you flash the eboot which you have not done since it still works and turns on.
Unplug from USB cable and turn it of and/or take out the battery. Put the battery back in and plug it into your PC and try to update it with PC studio and see if it works it should not have an issue. Repeat the steps if it fails but this time start PC studio first and then plug in the omnia and see if that works.
If all else fails you need to get OCTANS and download the official firmware for your region or a custom firmware if you want. I'm assuming you have a I8000 which OCTANS is used to flash don't know if that is the case with other omnia 2 as well. Visit this site and look for OCTANS and all the firmware you need. Since you are flashing anyways i would recommend you flash JD3 ROMS so you have the latest. Either go official ROM or go Lite i myself am using tw2 lite ROM.
I went to that site and nothing on there says anything about "OCTANS" so could you possibly give me a link of some sort to what I need.
I've tried running PC Studio on XP and Vista with no luck on getting the computer to even see the phone anymore so I've just about given up on the whole thing.
heavywater said:
I went to that site and nothing on there says anything about "OCTANS" so could you possibly give me a link of some sort to what I need.
I've tried running PC Studio on XP and Vista with no luck on getting the computer to even see the phone anymore so I've just about given up on the whole thing.
Click to expand...
Click to collapse
Here is the Octans Downloader's latest version. Just run it (If you are using Windows Vista or 7, set compatibility mode to Windows XP SP2), select the appropriate parts in various slots, click Detect Device and then turn off and plug your phone into usb cable. It will detect the phone, then just press Start and wait for the process to complete.
In addition to these steps, you might also need to update activesync drivers and install Samsung CDMA Modem drivers if you are using Windows 7 or Vista. For more details, see this thread :
http://www.modaco.com/content/b7610-omnia-pro-b7610-modaco-com/299070/tut-flashing-rom-using-octans/
I hope you get back your phone soon!
Good luck and Cheers!
same problem - cannot flash: the phone is stuck with an image of a mobile device, a pc, and a (!) sign in between.
unable to hard reset, unabe to flash - octan does not detect the phone...
any chance to save my phone?
1. get the ROMs from modaco site.
2. Start Octans and follow the ROM update guide in modao.
3. Click detect in Octans.
4. Power off phone (remove battery and insert back in ur case).
5. connect phone to PC/laptop (do not use any usb hub).
6. u shd see the download button becomes ungrey. click it to flash.
the download button remains grey......
what OS are u using?
If it's vista or win 7 and whether it is 32bit or 64bit.
The solutions are at modaco.
i read modaco.
the device is stuck: when i turn it on, the screen shows only one image:
an image of a mobiel device, a pc, and in between a (!) sign.
cannot hard reset device, cannot do anything.
am using vista, and followed all protocol from modaco (first time was able to flash - thats how the device got bricked).
octans (or the pc) does not detect the device when i connect it to the - that is the problem...
OK I now have installed the CDMA drivers and i'm running OCTANS in XP SP2 mode what OS should I download to use with the phone and how big will it be?
Thanks so much for the help guys.
And btw is there any versions that will keep the samsung virtual keypad and things like that (not the damn cube though)?
like i menchioned get a lite ROM I use tw2 ROM's Garys are good to. I like tw2 ROM because they are totally stipped ROMS except for samsung dialer and SMS and he gives cabs of all the apps so people can restore what they use. Garys is also very nice lite ROM with the basic apps that mainly everyone uses. Its your choice really what you want you can install the JD3 stock ROM as well, but why? when these lite ROM's giuve you more RAM.
As for drivers you may need to search on the site i don't have the links because there are new updated drivers for windows 7 which should work on vista too. When using octans make sure to hit detect and then plug in the phone (phone must be off) then click start. You only need to flash the PDA unless other parts messed up during the update, you won't know till you flash.
Driver installation:
1.) Turn off Phone
2.) Plug into PC
3.) Let it install the default drivers
4.) Go into device manager
5.) Go under the phone menu
6.) Update drivers and follow the steps and when asked which location point to the driver you just downloaded.
flash i8000
PROBLEM-HEPL pls..
cannot flash: the phone is stuck with an image of a mobile device, a pc, and a (!) sign in between!
unable to hard reset, unabe to flash - octan does detect the phone, but flash phone image and error (the end)
octan write: [Setup:0] PDA Device removed.
[Setup] Windows XP
[Setup] Download Ram Size :41777920 bytes,(39 MB)
OnDeviceChange \\?\USB#VID_04E8&PID_6619#5&ed04620&0&4#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}
[Down] CSC Image.
[Down] MoviNAND Image.
[Down] Phone Image.
[CSC:0] Download start 0x0
[CSC:0] ----------------- Information of Multi CSC Image ------------------
[CSC:0] Verision:[I8000ATOIJ8]
[CSC:0] SalesCode:[ATO]
[CSC:0] Priority:[0x1]
[PDA:0] LANG_ID:[7][0405]
[Phone:0] Download to 0x0
[Phone:0] StartOffset: 0
[Phone:0] EndOffset: 16777216
[MOVINAND:0] Download start 0x0 and all!! :-(
I have win 7 32bit..driver install from modaco..octans (setting XP service pack3), restart..but cannot flash..HELP please? Soory, my bad english...
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
freebo21 said:
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
Click to expand...
Click to collapse
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
berrywr said:
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
Click to expand...
Click to collapse
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
freebo21 said:
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
Click to expand...
Click to collapse
What is your Zune version number and OS version?
berrywr said:
What is your Zune version number and OS version?
Click to expand...
Click to collapse
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
freebo21 said:
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
Click to expand...
Click to collapse
What about putting your phone in bootloader mode and will it read USB below when connected to pc?
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
nikola92 said:
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
Click to expand...
Click to collapse
I've inserted a correction here...I restarted by device in bootloader mode and plugged it into my laptop; Zune did not start; however, the letters "USB" do appear in the center-bottom. Rest of post remains the same...You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
berrywr said:
Your phone uses both Zune and WMDC when you are in Bootloader mode. You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
Click to expand...
Click to collapse
I tried on windows 7 pro 64 bit and win 7 home premium. It did not work. In bootloader mode to install the drivers successfully but the Zune does not detect the phone in this mode. Including the phone in normal mode, the driver installation error pops up device not recognized. Zune without the driver does not detect the phone. Previously the phone was detected under the name HTC Titan X310 is now htc eternity.
please help
I have exactly the same problem. Please help: (
vakos8 said:
I have exactly the same problem. Please help: (
Click to expand...
Click to collapse
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
berrywr said:
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
Click to expand...
Click to collapse
Does anyone have any ideas what it could be? Please help solve the problem.
freebo21 said:
Does anyone have any ideas what it could be? Please help solve the problem.
Click to expand...
Click to collapse
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
HTC TITAN
xconomicron said:
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
Click to expand...
Click to collapse
help someone? Zune still does not see the phone. The system can not install the driver why are these problems (it does not recognize the phone)
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
HTC TITAN
AndrewSh said:
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
Click to expand...
Click to collapse
It's not possible. Windows does not recognize the phone. Install different ROM and nothing. Even on a clean TANGO same
+1
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
problem
help someone?
domipasc said:
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
Click to expand...
Click to collapse
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
xconomicron said:
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
Click to expand...
Click to collapse
I've never used the Dynamic ROMs but I can't stand using Zune so I tweaked my registry to make my Titan visible via Windows/File Explorer, I'm curious as to whether any of you with this problem can connect your devices to the developer tools with Windows Phone 7.x for side loading apps.