Related
Think there will be cool silicone covers and unique cases for the Touch HD similar to the iPhone? One thing about my Touch Pro and Tilt I have is they don't make silicone covers due to the slide out keyboard. On rare occasions I've dropped my Tilt on asphalt and scratched it bad.
Just want a good protector for a 1000 dollar phone when it comes out.
Would appreciate any info or rumors of accessories coming out..
Thanks
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
What about those invisible shields? They are transparent stickers essentially that cover the entire phone. I think it would be better to have that as it protects the phone from scratches and still leaves the cool uncased form factor. I saw one on my friend's iphone. Looked fine.
Seidio case for the HD?
I wonder if there will be a Seidio case for the Touch HD, as I'm very satisfied with the one I have for my TyTn II (it literally saved it's life)
tboy2000 said:
What about those invisible shields? They are transparent stickers essentially that cover the entire phone. I think it would be better to have that as it protects the phone from scratches and still leaves the cool uncased form factor. I saw one on my friend's iphone. Looked fine.
Click to expand...
Click to collapse
I will also buy an invisible shield for my HD when i have it, it's more beautiful than the silicone covers.
Temporary Silicone Solution
galaxys said:
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
Click to expand...
Click to collapse
Here is a temporary silicone solution I've been using. Be careful as its a snug fit.
http://www.target.com/Incase-Protec...49637?ie=UTF8&index=target&rh=k:incase&page=1
galaxys said:
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
Click to expand...
Click to collapse
I'm using a black Belkin silicone case meant for an iPhone 3G. I had to cut a hole for the camera and the headphones. It fits, but not too tight. I think it will hold me over until the official HD models hit the market.
It seems there is one sold here
http://bluetrade.eu/index.php?page=product&id=13413
but they are out of stock !!!
Matterhorn said:
I'm using a black Belkin silicone case meant for an iPhone 3G. I had to cut a hole for the camera and the headphones. It fits, but not too tight. I think it will hold me over until the official HD models hit the market.
Click to expand...
Click to collapse
Sounds Like a good idea any chance of some close up pics so we can see how good it fits?
We r in Luck!!!!!!!!!!
http://cgi.ebay.co.uk/Silicone-Case...14&_trkparms=72:1300|66:2|65:12|39:1|240:1318
Enjoy...........
http://cgi.ebay.co.uk/Crystal-Case-...300|66:2|65:12|39:1|240:1318#ebayphotohosting
Or a hard case?
cheap price...i ordered a silicone case until something better comes along.
yeah I also ordered silicone one, I think it protects the glossy frame well
HD Cases
Check here for cases, cheap prices and fast delivery (to Greece approximately 1 week from Hong Kong)
And now they do have silicone and crystal cases
We r in Luck!!!!!!!!!!
http://cgi.ebay.co.uk/Silicone-Case-...1|240:1318
Enjoy...........
Click to expand...
Click to collapse
What means? There are not especially covers for HD !!!!!!!
Found at NetTask.
Thanks to ktsak
dadeluna said:
What means? There are not especially covers for HD !!!!!!!
Found at NetTask.
Thanks to ktsak
Click to expand...
Click to collapse
It's http://www.netimes.com/shop/htc-dopod-touch-hd-t8282-blackstone-c-80_612.html
Enjoy !!!!!!!!!!
What do you think about the original silicon case from HTC (HTC Touch HD Silicon Case SC S420)?
https://www.htcaccessorystore.com/ee/p_htc_item.aspx?i=176956
You think it would fit together with the leather case I am getting from digitec.ch?
http://www.digitec.ch/ProdukteDetails2.aspx?Reiter=Bilder&Artikel=159942
Ascenca
looks nice, but not available until next year... i don't want to wait; i'd rather protect now with something cheaper an purchase HTC's version later.
My silicon arrived from ebay today. Package contains the case, a replacement screen protector (which I will not use - waiting for invisishield) and a useless neck strap (useless in that there is no strap loop on the case!).
The case itself fits easily, makes the Hd easier to hold in the hand, and makes me much less scared of dropping it.
Of course, now I have introduced a new surface into the equation, the propensity for scratches via this method increases. However, the fit is pretty good and I certainly prefer this to having the paintwork exposed all the time.
thedaddyy said:
http://cgi.ebay.co.uk/Silicone-Case...14&_trkparms=72:1300|66:2|65:12|39:1|240:1318
Enjoy...........
Click to expand...
Click to collapse
One of these came today. It is specifically for the THD. The fit is good the cut outs in the right place and the buttons sound and off operable through the rubber.
At £3.49 It will do for now.
I have been lookig for something that provides suitable screen protection for the Touch HD, so that it can be carried in a pocket with other items with no corcerns about things being pressed against the screen. I have an Invisible Shield to protect from scratches, but obviously this won't protect against excessive pressure being applied and the open frame type protectors likw thw silicon and crystal won't offer much help. Normal leather pouches offer greater resistance, but it is still soft material and whilst it can spread pressure, it won't totally stop it.
So far the only thing I have seen that may offer what I am looking for is the Proporta Alu-Leather Case
Yeah i like the protection that the cover offers, however i don't like the method of holding the HD in the case.
Those side brackets/grip things might damage the outer edge of the surround.
This method also seems to leave a lot of the outer edges exposed.
Although the screen protection is not aluminum, i prefer the Pielframa and Noreve method of holding the HD in the case.
I ordered mine from proporta , just waiting for delivery and i gonna give you my feedback
i just recieved it an it feets perfect with my blackstone.
Has anyone come across anything else that offers similar protection for the screen. Being vegetarian, I'd prefer to use something other than leather. I had hoped I would find a plastic or metal case with the flip front design, but I've not seen anything remotely like that.
Neofolis said:
Has anyone come across anything else that offers similar protection for the screen. Being vegetarian, I'd prefer to use something other than leather. I had hoped I would find a plastic or metal case with the flip front design, but I've not seen anything remotely like that.
Click to expand...
Click to collapse
Try Ebay you will find lot of Aluminium Covers.
Mike fait nimps said:
i just recieved it an it feets perfect with my blackstone.
Click to expand...
Click to collapse
I received my Proporta for 3weeks ago and my phone will started to become to go out more and more from cases grips ..
I went to the local shoemaker and sewed solid 2 pieces leatherstop at the bottom of the case.
Now ... much better than when I got the case
fjellborg said:
I received my Proporta for 3weeks ago and my phone will started to become to go out more and more from cases grips ..
I went to the local shoemaker and sewed solid 2 pieces leatherstop at the bottom of the case.
Now ... much better than when I got the case
Click to expand...
Click to collapse
Could you post a picture please? Because I got mine yesterday and thought, that it will wear out soon. Now that you confirmed my fear I would like to know how your solution looks like.
Proporta RULEZ
I had Proporta Alu-leather case for my old HTC Cruise. Now I have Blackstone and I just ordered Alu-leather case again. It is great and PDA is safe even when you go home from pub ))
Selecao said:
Could you post a picture please? Because I got mine yesterday and thought, that it will wear out soon. Now that you confirmed my fear I would like to know how your solution looks like.
Click to expand...
Click to collapse
Htc does not slide over leather edge .. if you do not take....
Camera hole in the case is fixed so I am happy with the modifications.
fjellborg said:
I received my Proporta for 3weeks ago and my phone will started to become to go out more and more from cases grips ..
I went to the local shoemaker ...
Click to expand...
Click to collapse
proporta offers lifetime warrenty! just mail them your problem and they will offer you a new case - 4free
(provided your shoemaker didn't modify it 2 much)
Does the case grip affect the Invisible Shield layer on the phone? and how thick is the case with the phone inside?
Lou_tzepher said:
Does the case grip affect the Invisible Shield layer on the phone? and how thick is the case with the phone inside?
Click to expand...
Click to collapse
fjellborg said:
Htc does not slide over leather edge .. if you do not take....
Camera hole in the case is fixed so I am happy with the modifications.
Click to expand...
Click to collapse
So far no damage, As for the thickness of it is ok , and no needs such modifications, holders well kept, at least with me
Thanks a lot.
Hi all,
searching for an invisible, thin protection film for my Topaz I found this website
http://www.gadgetshieldz.com/htc-to...s-screen-protectors-covers-cases-shields.html
It is exactly the same shield you might know from other manufacturers, but look at the price: 6.99 and free shipping included!
To make it short: Delivery was fast, the product is excellent (I have one of those expensive ones on my iPod so I can compare), and the installation is very easy. They even have an explaining video on their website.
I can recommend this product to everyone.
Greetz
ottoben
Hehe.. the fact that they refund to whoever who posts reviews abt them online...
wondering if these reviews are genuine or not.
No offence ottoben.. I'm just thinking out loud. I got my Shieldz too.. Pics here:
http://forum.xda-developers.com/showpost.php?p=4116914&postcount=194
MasK said:
Hehe.. the fact that they refund to whoever who posts reviews abt them online...
wondering if these reviews are genuine or not.
No offence ottoben.. I'm just thinking out loud. I got my Shieldz too.. Pics here:
http://forum.xda-developers.com/showpost.php?p=4116914&postcount=194
Click to expand...
Click to collapse
It's ok to me to say what you think. But I really think their product is as good as the much more expensive ones and that's what I wanted to share. BTW I dit not apply for the refund...
I have these too, and have found them excellent, however, the screen protector part is a little too "rubbery" for my taste - I feel that my fingers don't slide about as easily on the screen, therefore, I use the gadget shieldz for back and sides of the device and the standard HTC screen protector on the front - gives me best of both worlds IMHO
Ordered now - lets see when it turns up and if it's any better than the InvisibleShield...(that was rubbish tbh)
adesonic said:
I have these too, and have found them excellent, however, the screen protector part is a little too "rubbery" for my taste - I feel that my fingers don't slide about as easily on the screen, therefore, I use the gadget shieldz for back and sides of the device and the standard HTC screen protector on the front - gives me best of both worlds IMHO
Click to expand...
Click to collapse
Yup.. exactly. I tested my friend's Cruise too, with the screen covered with it too. Totally unacceptable for me on the screen. Using a stylus makes it much worse.. so I applied it on the back only.
My friend's Cruise apparently had Invisible Shield.. and I think the rubbery-ness is about the same. I do however feel that GadgetShieldz has less wavy effect, thus, it looks better
Price-wise.. forget IS. Ya don't need the fancy packaging, spray bottle or a card. GS is worthit.
My feedback for gadget shieldz
MasK said:
Yup.. exactly. I tested my friend's Cruise too, with the screen covered with it too. Totally unacceptable for me on the screen. Using a stylus makes it much worse.. so I applied it on the back only.
My friend's Cruise apparently had Invisible Shield.. and I think the rubbery-ness is about the same. I do however feel that GadgetShieldz has less wavy effect, thus, it looks better
Price-wise.. forget IS. Ya don't need the fancy packaging, spray bottle or a card. GS is worthit.
Click to expand...
Click to collapse
After seeing Mask post from another thread on the matt cover, i had order and using gadget shieldz now...
I had Invisiable shield on my previous Diamond 1.
Overall, i feel gadget shield is thinner than Invisiable Shield.... better feel, less rubbery....
but on gadget shield seems easier to be srcatch or stretch...
i had some stretch mark when i try hard to push the air bubbles.
This stretch marks is ugly as it is on the front screen area....
Just have to be extra careful during application of the shield
I also got the gadget shield, but my main problem is that it is about 2mm off on all sides. So I have small gaps between the pieces. Does invisible shield have the same problem?
supreme_one333 said:
I also got the gadget shield, but my main problem is that it is about 2mm off on all sides. So I have small gaps between the pieces. Does invisible shield have the same problem?
Click to expand...
Click to collapse
You mean 2mm smaller than the device? I though that's normal..
I only applied at the back, so it's not a problem for me..
so does anyone who has tried out invisibleshield have problems with it not fitting perfectly because if it doesn't have problems I might buy one.
Gadgetshieldz
Hi all,
Just got my Gadgetshieldz this morning. The instructions are pretty good, easy to follow. However, for the pieces that fold over the sides, they don't stick well. The plastic is too rigid and won't fold and stick. I ended up with only the front screen and the backing done. I couldn't be bothered with the sides as they were too fiddly and weren't a perfect fit anyway. The opening near the speaker on the right wouldn't stick properly and am currently sitting hte phone on its side hoping that portion would stick when its dry. Overall, Gadgetshieldz looks like a good cheaper alternative to Invisible shield, (I tried tearing apart the smaller strips and they were quite robust) but usage on the diamond is really average. From what the others have said, I will most likely be tearing off the screen protector and buying another replacement if there is too much traction. Will make another post when it dries.
Cheers.
Jeremy
Gadgetshieldz
supreme_one333 said:
I also got the gadget shield, but my main problem is that it is about 2mm off on all sides. So I have small gaps between the pieces. Does invisible shield have the same problem?
Click to expand...
Click to collapse
I concur on this one. I just installed Gadgetshieldz on the weekend. The battery cover portion has unsightly gaps at the top. The strips that are meant for the sides are way short and I didn't even bother applying them. Am probably gonna strip off the protection sheet and stick to a soft plastic case. They are a bit chunkier but more rigid than the silicone versions.
To anyone who gets air bubbles under screen protectors; URDOINITRONG.
Ensure the surface of both the device and the protector are COMPLETELY dust free; The smallest particle of dust, fluff, or hair will make an air bubble a good 3 or 4mm in diameter.
Other than that, ensure the edges line up straight and roll down from one side to the other. Seempulz!
I'd recommend GadgetShieldz.com.
£3.00 delivered and does the job well.
dg
I bought one as well and fits perfectly. But installation made me crazy some pieces are too small for my fingers
Gadgetshieldz is looking like a great option to me..Ordering one now..Will see how it goes.
So Poetic has some new cases due to come out on October 30th according to Amazon. They look very nice and are definitely my style of case.
Here they are:
Turtle Skin: http://www.amazon.com/Nvidia-Shield...869&sr=8-6&keywords=nvidia+shield+tablet+case
Revolution: http://www.amazon.com/Nvidia-Shield...69&sr=8-15&keywords=nvidia+shield+tablet+case
Personally considering the Turtle Skin case as the ability to use your stylus as a kickstand is great. Not sure why the Revolution version has most of the speakers covered. (Unless those spots they cut out are the only areas where sound is coming out?)
What do you guys think? I'll be updating this post with the Turtle Skin case as soon as I get it.
No speaker holes.
I was looking at those the other day and couldn't figure out why the frig they covered up 90% of the speaker ports.
Kind of makes dual forward facing speakers a moot point? Someone in the final approval dept. needs to get off the crack and look at the way it actually works lol.
Poetic is great. Ive had 3 tablets prior to the shield and used poetic cases for them all. These are terrible cases compared to the ones Ive used before. I cant bare to think of how hot the k1 will get in these beasts.
uuang said:
Poetic is great. Ive had 3 tablets prior to the shield and used poetic cases for them all. These are terrible cases compared to the ones Ive used before. I cant bare to think of how hot the k1 will get in these beasts.
Click to expand...
Click to collapse
Yeah I was a sucker and paid way too much for the Shield tablet cover, but after using it and playing the k1 optimized games I know why they went with the open back design with minimal contact points. It would be awesome to find a silicone bumper or something to still fit the tablet but a fully covered back on the shield is not a great idea if you actually use it for gaming IMO.
Pre-ordered a revolutions case.
As for the speakers if you play around covering up the grills you'll notice that where poetic have put their holes is actually where the sounds comes out the most.
Has anyone tried the turtle case yet? I had ordered the Revolution back in Oct but was not one of the ones to get the first shipment so I canceled it and went with a flip cover case. However for normal day to day use the flip cover case is kind of annoying and I'd like to switch to an open face case like these.
Just got one of these puppies and want to see the REVOLUTION case in action. Can anyone please post pics? Tia!
Finally got my Poetic case just before christmas. Here are some pictures and a video I made.
Poetic 1 by MIKEYMC1, on Flickr
Poetic 2 by MIKEYMC1, on Flickr
Poetic 3 by MIKEYMC1, on Flickr
Poetic 4 by MIKEYMC1, on Flickr
Poetic 5 by MIKEYMC1, on Flickr
Poetic 6 by MIKEYMC1, on Flickr
Wow the case looks BOSS!! Thank you so much for pics and video.
I'm thinking about the revolution case myself. Does the built in screen protector affect the stylus performance?
Sent from my 831C using Tapatalk
lacrossev said:
I'm thinking about the revolution case myself. Does the built in screen protector affect the stylus performance?
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
for me it did. I think it might had more to do with the fact that I already had an illumishield cover.. I didn't really care much for the built in screen protector, considering it kept giving that oily look, like in the pics above. Anyways, with both the illumishield and built-in protector, the touch sensors was wonky, especially when using the stylus. And since I liked the non oily look of the illumishield, I just basically hacked away the built-in screen protector. as far as the case though? it's pretty awesome..
Ah ok, i didn't notice that it was the soft type screen protector that does that oily crap cuz i was on mobile when i saw the photos. I also like to provide my own screen protector and just use the frame, thanks.
My poetic case is coming in today. I had the thought of doing the same thing as the other guy. Cutting off the protector of the poetic and installing my own screen protector.
With the built in protector only the stylus works fine. Don't like the weird oily looking effect though and probably will remove it also.
Now I've used it for a while there are things I really don't like about it. The buttons are really hard to press now, I might try to mod it to make it better. The port cover will probably get cut off as it doesn't stay in after being left on charge over night. The stand is a nice feature but poorly done, only one angle option and its not a good one. Would be good to have some sort of incremental angle options and to lock into place.
But the protection the bulky case provides cannot be denied.
ooBONGoo said:
for me it did. I think it might had more to do with the fact that I already had an illumishield cover.. I didn't really care much for the built in screen protector, considering it kept giving that oily look, like in the pics above. Anyways, with both the illumishield and built-in protector, the touch sensors was wonky, especially when using the stylus. And since I liked the non oily look of the illumishield, I just basically hacked away the built-in screen protector. as far as the case though? it's pretty awesome..
Click to expand...
Click to collapse
That was the dirst thing I did when I got mine. I've never really liked the built in screen protectors, they all seem poor compared to combining the case with a nicer screen protector. Use tempered glass + Otterbox on my M8, and an illumishield + poetic on the shield. Not a huge fan of the buttons, but it's stil the best and basically only choice for a hard case.
just wondering, anyone here has cracked edges problem?
I read it like almost everywhere on the nvidia forum... and ppl there are.. kinda nasty. most of the things discussed there is not constructive...
So I had a mixed experience with the Poetic Revolution case.
tl: dr Poetic need to make a SlimLine range for the Nvidia Shield Tab so it can be oriented in Landscape and Portrait.
I had to shave off the locking lugs that stow the stand so I could easily deploy and stow the stand. I also had to cut into the flap so it would return to the covered position. The material that Poetic chose to use for the rubberized flaps is different to the SlimLine range of cases, and is less flexible.
I also had an issue with the kickstand hinge lugs breaking off and I had to request a new case.
The new case is better than the first one. The stand will deploy much easier now, and the rubberized material *eventually* returns to it's original position. It still doens't close immediately after you have unplugged headphones or the charging cable, but it gets there eventually.
jaredmorgs said:
So I had a mixed experience with the Poetic Revolution case.
tl: dr Poetic need to make a SlimLine range for the Nvidia Shield Tab so it can be oriented in Landscape and Portrait.
I had to shave off the locking lugs that stow the stand so I could easily deploy and stow the stand. I also had to cut into the flap so it would return to the covered position. The material that Poetic chose to use for the rubberized flaps is different to the SlimLine range of cases, and is less flexible.
I also had an issue with the kickstand hinge lugs breaking off and I had to request a new case.
The new case is better than the first one. The stand will deploy much easier now, and the rubberized material *eventually* returns to it's original position. It still doens't close immediately after you have unplugged headphones or the charging cable, but it gets there eventually.
Click to expand...
Click to collapse
What procedure did you use to get a replacement for broken kickstand? I agree with your experience, pretty much the same issues here. Still like the case but hinge and hard to press buttons.
jasonpctech said:
What procedure did you use to get a replacement for broken kickstand? I agree with your experience, pretty much the same issues here. Still like the case but hinge and hard to press buttons.
Click to expand...
Click to collapse
I just used their web site contact form. If you are in the states, you won't need to pay the postage fee. I had to, because I'm in Australia.
Right on, they asked for Order number & picture of damaged region and my address. The new case has already been shipped no need to return the defective old one either. Thanks for your tip.
Picked up the McClaren 5g version from T-Mobile yesterday, and I'm in love with the phone, throughout. Beautiful design, hardware, software. Everything.
I wanted a protective case however did not want to cover the beautiful back.
I figure the combo is cheap enough that I can get something else if this doesn't fit my needs.
Anyone else tried either of the two products?
Crisisx1 said:
Picked up the McClaren 5g version from T-Mobile yesterday, and I'm in love with the phone, throughout. Beautiful design, hardware, software. Everything.
I wanted a protective case however did not want to cover the beautiful back.
I figure the combo is cheap enough that I can get something else if this doesn't fit my needs.
Anyone else tried either of the two products?
Click to expand...
Click to collapse
What combo are you referring to? (No link or images provided.)
RhinoShield has the Crash Guard bumper & a clear skin for the backside (screen protector also available).
This combo definitely fits what you're looking for.
As with all of the Crash Guard bumpers, it adds quite a bit of an increase to the overall width of the phone. If that isn't a factor one way or the other, I'd say you need to look no further.
I'm sure there's some aluminum bumpers available from eBay & the like, but, they offer little to no protection & likely have an even more uncomfortable grip vs the included case or, the RhinoShield Bumper.
Sent from my OnePlus7TProNR using XDA Labs
Hmm not sure why the photos didn't post. Trying again.
Crisisx1 said:
Hmm not sure why the photos didn't post. Trying again.
Click to expand...
Click to collapse
THX for posting the pix. :good:
There's several different mfgs with this design to be found on Amazon/e-Bay/Ali Express, etc......
I like the idea of clear cases in general, but, most seem to have some nagging traits....
The rainbow effect comes to mind right off the bat, as well as being a fingerprint magnet.
Most don't wear well after a few weeks of use, with scuffs/scratches.
A matte clear case may negate most of the above, but, likely will obscure the true appearance of the decorative backside.
I've seen some all-glass cases, encasing the entire phone, front & back, might not be a bad way to go.
https://www.amazon.com/Magnetic-Samsung-Double-Sided-Tempered-Protection/dp/B07WR7DKD1
Sent from my OnePlus7TProNR using XDA Labs
KOLIOSIS said:
THX for posting the pix. :good:
There's several different mfgs with this design to be found on Amazon/e-Bay/Ali Express, etc......
I like the idea of clear cases in general, but, most seem to have some nagging traits....
The rainbow effect comes to mind right off the bat, as well as being a fingerprint magnet.
Most don't wear well after a few weeks of use, with scuffs/scratches.
A matte clear case may negate most of the above, but, likely will obscure the true appearance of the decorative backside.
I've seen some all-glass cases, encasing the entire phone, front & back, might not be a bad way to go.
https://www.amazon.com/Magnetic-Samsung-Double-Sided-Tempered-Protection/dp/B07WR7DKD1
Click to expand...
Click to collapse
I've had luck with uag clear cases, however, as you know they aren't truly 100% transparent and clear due to their honey comb pattern design.
That all glass case is a pretty interesting design, never seen it before. I wouldn't imagine it would look as good after 3,4 drops compared to a plastic /poly case.
I'm definitely not opposed to trying a different combo if this one doesn't work, as it was less than 20 dollars. I did look into the dome whitestone glass sp, however I'm opposed to applying an actual adhesive to my screen.
Any other decent glass sp that doesn't require adhesive?
Here's the case. After closely examining the edges of the phone and case, I am not sure this screen protector will be compatible as I will interfere at edges and pull up.
The screen protector and case fit perfectly. A bit different installation method then what I'm usually used to, but got it perfect on the second try. Very pleased.
Crisisx1 said:
The screen protector and case fit perfectly. A bit different installation method then what I'm usually used to, but got it perfect on the second try. Very pleased.
Click to expand...
Click to collapse
Do you have a Link? The one above didn't Work.
sh1z0 said:
Do you have a Link? The one above didn't Work.
Click to expand...
Click to collapse
Here is the screen protector
https://www.amazon.com/dp/B07QTXX694/ref=cm_sw_r_other_apa_i_JDjaEb9W5M6QK
Here is the install video
Here is pic trying to show the case edge and sp slight separation. A bit hard to see, but at $8 for 3 sp, I'm surprised by the quality of the sp.
Update.. I've been using the 7t pro mclaren case with the sp and fits flawlessly
Crisisx1 said:
Here's the case. After closely examining the edges of the phone and case, I am not sure this screen protector will be compatible as I will interfere at edges and pull up.
Click to expand...
Click to collapse
Your case isn't even compatible with the phone. You are covering the laser autofocus area on the back. The 7 Pro cases don't have the necessary cutout. You need a 7T Pro case.
I know this was already addressed in a different thread. No longer using that case. Now using the one that came with the mclaren.
LLStarks said:
Your case isn't even compatible with the phone. You are covering the laser autofocus area on the back. The 7 Pro cases don't have the necessary cutout. You need a 7T Pro case.
Click to expand...
Click to collapse
Up
Im using Supcase Unicorn Beetle case with an Alinsea Screen Protector. Everything fits perfectly.
lilaznboi5582 said:
Im using Supcase Unicorn Beetle case with an Alinsea Screen Protector. Everything fits perfectly.
Click to expand...
Click to collapse
I will get my OP7T Pro in two weeks and I'm going to buy exactly this combination. I am curious if everything fits.
Sent from my OnePlus 5T using XDA Labs
Paulikid said:
I will get my OP7T Pro in two weeks and I'm going to buy exactly this combination. I am curious if everything fits.
Sent from my OnePlus 5T using XDA Labs
Click to expand...
Click to collapse
It fits nicely like it is made for each other. it has maybe 1mm gap between the glass protector and case.