Related
I was in Clockwork Recovery after backing up my stock system (this is my first time) it gave me the options in green text: Reboot, reinstall update.zip, etc.
I chose reboot and everything loaded up fine and after checking in Rom Manager I have a backup of my system. I just want to know if that was the right choice. or should I have reinstalled update.zip
I guess my question revolves around update.zip.
What is that file? I know I originally used it to gain root access but do I need to reinstall it from clockwork recovery everytime before rebooting? and when should I delete it? and are there any negative consequences for not doing either?
As you can tell I'm a noob....but hey I can't believe I'm rooted and backed up at the moment. I'm gonna stop here before flashing any custonm roms and get this question answered first.
I think you are fine. I would not worry so much, i have deleted the update.zip, but since you booted up into ClockWork Recovery you are most likely fine.
I am booted back up completely and the stock os is running and I'm still rooted. I just want to know what that option inside of clockwork recovery means. What is the reason to reinstall update.zip from clockwork recovery and what is the reason to reboot? And once I'm booted back up and running when/why do I go into my files and delete update.zip?
It's not that I'm worried...I just want to know why I'm doing what I'm doing.
I would keep the file. Less chance of failure.
You are only going to use cwr for this:
Backup/restore system
Wipe cache, factory wipe, etc
Flashing rom's (install from sd card)
Don't worry about the other stuff.
I'm confused by the op, not sure how you made a backup from how it reads.
I think I made the backup by flashing into clockwork recovery from rom manager. It started with the purple text recovery mode and I hit reinstall packets. Then it went into the green text clockwork recovery....I think. I've only done it once.
So in clockwork recovery I choose the backup/restore option and then the backup option. So then the phone I assume began the backup process and displayed many lines of white text. At the very end it said something about not being able to mount my ext sd card (which) had me worried.....but then it brought up the menu again. The top option was reboot, the second was reinstall update.zip and I didn't pay attention to the rest because I was pretty sure I needed one of the first two....I just didn't know which one. I selected reboot and the phone then booted into the stock os and was still rooted. Is the fact that it wasn't able to mount my ext sd card at the end of the backup process an issue? I'm able to find a backup in rom manager. Also, if the backup process works correctly should the phone reboot by itself?
What I'm asking is what am I booting from when I choose "reboot" from clockwork recovery and what does it mean to choose "reinstall (packet?) update.zip"? I thought update.zip was what I needed to root.
This last step wasn't in your tutorial (purple text menu) so maybe something didn't go as it should have.
I'm not sure.
Thanks s15274n for the tutorial btw. Its by far the most helpful concise instructions I've found and is really appreciated.
Sent from my SGH-T959 using XDA App
The update.zip in the root of the internal SD card is clockwork recovery (CR). When you install CR it does not overwrite your phone's recovery. What it does is install that update.zip in the root of the SD card. When you want to use CR, you need to "update packages" which will flash that update.zip which contains the CR package. That will load CR into memory only and still does not overwrite the original recovery on the phone. When you reboot into recovery from ROM Manager, it automatically reboots and applies the update.zip and places you into CR. If you enter recovery manually (via buttons on boot), you will need to "re-install packages" from the stock recovery to get CR.
So if you want to use CR, keep that update.zip in the root of the SD card. If you erase it, you will need to re-install it (using ROM Manager) before you can use CR instead of the stock recovery. I hope that makes sense. If not, here is the explanation straight from Koush on how it works.
http://forum.xda-developers.com/showthread.php?t=734164&highlight=clockwork
^^ You are all good then.
The SD-EXT is not going to backup, because you do not have a partiotion on your external SD card (no need for one, like some other phones require). This is normal from what you described.
You will never use the apply update.zip option in CWR... just dont pay any mind to it.
When you select reboot system now, that is all it is.... you are basically saying "Cool, I did everything I needed to do (backup/flash a rom/wipe, etc)... and now I am ready to reboot my phone... ie, you are basically cutting your phone on.
Positive you did, but you can open rom manager, click on manage backups and you should see a file there that has a format kinda like YYYYMMDDTIME, that is the backup you made... no action needed, just an easy way to verify you made a backup of your system.
s15274n said:
I would keep the file. Less chance of failure.
You are only going to use cwr for this:
Backup/restore system
Wipe cache, factory wipe, etc
Flashing rom's (install from sd card)
Don't worry about the other stuff.
I'm confused by the op, not sure how you made a backup from how it reads.
Click to expand...
Click to collapse
Thanks s15274n
i have been wondering the same thing about the update.zip file whether to keep it or not.
Thanks s15274n for the tutorial btw. Its by far the most helpful concise instructions I've found and is really appreciated.
Click to expand...
Click to collapse
Also wanted to say i feel the same way. Appreciate the guide so much!
Thanks guys. I'm glad to have that cleared up so I understand it. Gives me more confidence to do the other things I want to do.
I got confused with the fact that I need to delete the update.zip file after rooting and the fact thats its there again after flashing cw and backing up.
Sometimes I need things spelled out for me. Makes complete sense now.
Sent from my SGH-T959 using XDA App
THIS UTILITY IS FOR FASCINATE TOUCHWIZ FROYO/GINGERBREAD ONLY
UPDATED FOR EC09 GINGERBREAD
I have created a format utility that can be used from within CWM3 recovery. Just select the ZIP in CWM3 recovery, and the package will do ALL of the work for you.
These utilities come in two independent packages which will completely format your device with EXT4. As a bonus, it will create all directories and setup all ownership and permissions in accordance to the Fascinate.
Voodoo recovery does not currently allow you an option to select a format style, and furthermore does not truly format any partition unless it runs through the Voodoo "lagfix" transition upon booting the device.
There is one caveat in order to use EXT4: you need a kernel that supports it, and this would be using a "Voodoo" style kernel that has built in support. Luckily, most of the "good" kernels available have this ready to go.
Understand that this package will completely wipe your system, data, datadata (dbdata), and cache. This is a "full" wipe of the device. If you already have a ROM installed on your device and want to keep your device the way it is, and also want EXT4, then use the Voodoo method to switch to EXT4. The reason for this is because it backs up your data before it formats.
After you use this package, you can install any ROM of your choosing, as the package will already self-manage Voodoo's methods for "enabling" or "disabling" the "lagfix".
--------
Please report if the package is not working.
A good indicator of this is if you try to install the package and it only takes 1 second to work, then says it is finished. This means it is probably not working, however, if you are formatting the same type of file system over itself with no pre-existing data on the device, it will take the aforementioned 1 second to work.
To see if it worked: mount each partition in CWM3 recovery, then adb shell into your device and type the mount command, in the listing you should see what file system your partitions are using. If the big four all say EXT4, then the package install has been successful.
In order to assure that it will work correctly, use the latest version of a CWM3 recovery that you can find. I can personally vouch for nemesis2all's OTB CWM3 Recovery v3.0.2.8x.OTBv2. Unfortunately not all CWM3 recoveries are the same, and yours may not work with these utilities. If you find a recovery that works fine, post it here and I will update this.
--------
Packages updated: 6/28/2011 - 12:57PM EST
EXT4 Format ALL (formats everything): http://www.mediafire.com/?6hx7f8g7c8vv6xz
EXT4 Format CACHE: http://www.mediafire.com/?2621a888ydv41mg
EXT4 Format DATA: http://www.mediafire.com/?ck2bb340yybpe4z
EXT4 Format DBDATA: http://www.mediafire.com/?ahxzs8xsyyvemed
EXT4 Format FOTA: http://www.mediafire.com/?42ijpi67grdb6mm
EXT4 Format PREINSTALL: http://www.mediafire.com/?d42as1l3pdbhr2t
EXT4 Format SYSTEM: http://www.mediafire.com/?rgs46hhq8qd951t
--------------------
If you like my work, consider donating, or thanking me by clicking the thanks button
thanks for this
navenedrob said:
I have created two format utilities that can be used from within CWM3 recovery. Just select the type of file system you want to use, select it in CWM3 recovery, and the package will do ALL of the work for you.
These utilities come in two independent packages which will completely format your device with either RFS or EXT4. As a bonus, it will create all directories and setup all ownership and permissions in accordance to the Fascinate.
Voodoo recovery does not currently allow you an option to select a format style, and furthermore does not truly format any partition unless it runs through the Voodoo "lagfix" transition upon booting the device.
There is one caveat in order to use EXT4: you need a kernel that supports it, and this would be using a "Voodoo" style kernel that has built in support. Luckily, most of the "good" kernels available have this ready to go.
Understand that this package will completely wipe your system, data, datadata (dbdata), and cache. This is a "full" wipe of the device. If you already have a ROM installed on your device and want to keep your device the way it is, and also want EXT4, then use the Voodoo method to switch to EXT4. The reason for this is because it backs up your data before it formats.
After you use this package, you can install any ROM of your choosing, as the package will already self-manage Voodoo's methods for "enabling" or "disabling" the "lagfix".
Please report if the package is not working.
A good indicator of this is if you try to install the package and it only takes 1 second to work, then says it is finished. This means it is probably not working, however, if you are formatting the same type of file system over itself with no pre-existing data on the device, it will take the aforementioned 1 second to work.
To see if it worked: mount each partition in CWM3 recovery, then adb shell into your device and type the mount command, in the listing you should see what file system your partitions are using. If the big four all say EXT4 or RFS (depending on script used), then the package install has been successful.
In order to assure that it will work correctly, use the latest version of a CWM3 recovery that you can find. I can personally vouch for nemesis2all's OTB CWM3 Recovery v3.0.2.8x.OTBv2. Unfortunately not all CWM3 recoveries are the same, and yours may not work with these utilities. If you find a recovery that works fine, post it here and I will update this.
Click to expand...
Click to collapse
Ok, I think I'm having a complete idiot moment here so please be patient with me. What would be the benefits of me running this on my device that is currently running jt's CM7 with OTB 1.5 kernel and EXT4 (voodoo for those who don't know) already converted? Thanks in advance.
It would be of no use. Unless you need to format your entire device.
So this would be a good thing to flash in place of wiping between rom flashes? Does it have any benefits compared to a regular data and cache wipe when you are already converted to ext4?
It would be a good idea to flash it in that scenario, yes. Currently no ROM will do the job that this package will for you, which is why a lot of ROM's say not to wipe your device, because you'll run into major issues if you do. When you do your "wipes" through recovery it doesn't really do anything besides a recursive delete of files, so it doesn't really format anything (even though it says "format" in the menu system). The only time it actually does any formatting is during the Voodoo transition. When you do wipe those areas, it does not leave the file structure intact and also does not leave the ownership and permissions intact. These packages completely solve that problem. Also, these packages are focused on performance so everything is done that is possible to make sure that your file system is as fast as possible.
navenedrob said:
It would be a good idea to flash it in that scenario, yes. Currently no ROM will do the job that this package will for you, which is why a lot of ROM's say not to wipe your device, because you'll run into major issues if you do. When you do your "wipes" through recovery it doesn't really do anything besides a recursive delete of files, so it doesn't really format anything (even though it says "format" in the menu system). The only time it actually does any formatting is during the Voodoo transition. When you do wipe those areas, it does not leave the file structure intact and also does not leave the ownership and permissions intact. These packages completely solve that problem. Also, these packages are focused on performance so everything is done that is possible to make sure that your file system is as fast as possible.
Click to expand...
Click to collapse
Ok, so basically what you are saying is this would be ideal to use instead of data/cache/dalvik wipe for rfs to rfs and ext4 to ext4, correct? Thanks in advance.
That's correct.
I've teamed up with nemesis2all and we are thinking about adding all of these abilities to the OTB kernel, so you'll be able to choose different kinds of file systems and format options through CWM3 recovery instead of having to use these packages here. That will come when it comes, but for now this is the ideal solution.
EXT2/EXT3/EXT4/XFS/RFS etc...
Also, I've updated the attachments in the post.
navenedrob said:
That's correct.
I've teamed up with nemesis2all and we are thinking about adding all of these abilities to the OTB kernel, so you'll be able to choose different kinds of file systems and format options through CWM3 recovery instead of having to use these packages here. That will come when it comes, but for now this is the ideal solution.
EXT2/EXT3/EXT4/XFS/RFS etc...
Also, I've updated the attachments in the post.
Click to expand...
Click to collapse
Just to let you know, I ran the ext4 package and I got some serious lag issues after I installed my rom and it actually starting going into a soft boot loop. It began to act very weird and unstable. I booted back into recovery and I wiped everything the way I usually do and formatted the system/data/dbdata/cache manually in mounts and storage and reinstalled. It's better than it was but it still seems like it is kinda slower and more laggier than it was before I ran the package. Any ideas? Thanks man.
You'll need to give me more information than that to determine your problem.
What kernel are you using? What recovery are you using? What ROM are you running? What are the results of running the mount command with all partitions mounted?
navenedrob said:
You'll need to give me more information than that to determine your problem.
What kernel are you using? What recovery are you using? What ROM are you running? What are the results of running the mount command with all partitions mounted?
Click to expand...
Click to collapse
OTB 1.5, CM7. It's kinda weird. When I ran your package and then flashed cm7 and booted it, it was laggier than I have ever seen my phone and when I would try to do certain operations it would soft boot. At one point I couldn't even turn wifi on. So, I booted back into recovery and wiped and manually formatted everything and reinstalled everything. After that it was still kind of laggy but much better. I restored all of my apps and got my phone back to all my custom settings. Then I began to notice that it wasn't really lagging anymore, in fact it seemed pretty snappy. I ran quadrant to see if the numbers were the same as before to determine if I was in fact ext4 converted. Surprisingly the numbers were higher than normal. And I even noticed in titanium backup that some of my internal memory had been freed up. I can't explain it but everything seems to be running really good right now. It's almost like after running your package the phone had to be conditioned, and once it was conditioned it ran real good. But, that doesn't explain why it was soft booting and wifi wouldn't work. Who knows.
Not really sure exactly, it actually could have been a few different things causing the "issues". I'm going to try your exact scenario and see what happens.
kidserious said:
OTB 1.5, CM7. It's kinda weird. When I ran your package and then flashed cm7 and booted it, it was laggier than I have ever seen my phone and when I would try to do certain operations it would soft boot. At one point I couldn't even turn wifi on. So, I booted back into recovery and wiped and manually formatted everything and reinstalled everything. After that it was still kind of laggy but much better. I restored all of my apps and got my phone back to all my custom settings. Then I began to notice that it wasn't really lagging anymore, in fact it seemed pretty snappy. I ran quadrant to see if the numbers were the same as before to determine if I was in fact ext4 converted. Surprisingly the numbers were higher than normal. And I even noticed in titanium backup that some of my internal memory had been freed up. I can't explain it but everything seems to be running really good right now. It's almost like after running your package the phone had to be conditioned, and once it was conditioned it ran real good. But, that doesn't explain why it was soft booting and wifi wouldn't work. Who knows.
Click to expand...
Click to collapse
It's possible that since you wiped your market was trying to restore all your apps in the back ground which was taking all your memory up and making your phone lag. But after you restored all your apps it was all set
Coreyc1123 said:
It's possible that since you wiped your market was trying to restore all your apps in the back ground which was taking all your memory up and making your phone lag. But after you restored all your apps it was all set
Click to expand...
Click to collapse
What I meant was as soon as it booted (during setup wizard) it was super laggy. I download TB from the market by itself and it took forever to register. I was doing the GPS fix and it soft booted. I couldn't turn wifi on and it soft booted. All before I did a batch restore in TB. And I know that the market begins to sync automatically as it always does but this was much much different.
Sent from my SCH-I500 using Tapatalk
kidserious said:
What I meant was as soon as it booted (during setup wizard) it was super laggy. I download TB from the market by itself and it took forever to register. I was doing the GPS fix and it soft booted. I couldn't turn wifi on and it soft booted. All before I did a batch restore in TB. And I know that the market begins to sync automatically as it always does but this was much much different.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
I had these same symptoms one time that I installed kasonate v7, but after reflashing, the next time it didnt.
I know you're not talking about the same cm version, but they might be related and not related to the format utility.
Ok, I ran this package again to make sure that I didn't do something wrong and to see if I would get the same results. I ran the package, flashed cm7 then gapps then OTB GB 1.5. all from the recommended recovery in your post. Again I ended up in a soft boot loop and wifi was acting up again and was causing a boot loop. So once again I booted into recovery and wiped data/cache/dalvik normally and formatted manually via mounts and storage and reinstalled again and she's running like a dream. Very weird but I must say I am very happy with the results I ended up with, regardless of how I got them. So obviously, this was not your intention for it to be done this way but I do see an improvement in responsiveness, speed and memory being freed up. Before, my free internal memory was 1.49 and now it is 1.52. Thank you sir, I appreciate this.
Thanks for this utility! Works great. Went from Jt's cm7 to the miui/touchwiz rom and ran the utility in between. My phone is running faster than ever and no issues. Thanks again!
Sent from my SCH-I500 using XDA App
Yeah running this on mesmerize with heinz 57 best my phone has ever run quadrant of 2250s @ 1.5 ghz
Sent from my SCH-I500 using XDA App
stephenj37826 said:
Yeah running this on mesmerize with heinz 57 best my phone has ever run quadrant of 2250s @ 1.5 ghz
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
You're welcome, the utility enables a few nice options as far as file system performance is concerned, that Voodoo doesn't at this time.
Do tell oh and thanks a million
Sent from my SCH-I500 using XDA App
MAJOR UPDATE 2/22/12: While the process hasn't changed too much, the key files have all been replaced for greater flexibility, and they are NOT compatible with the old method using rookie1's prep-dualboot zip. See this post for an update path from the old method to the current one.
This guide details how to repartition your internal storage and install two operating systems, or ROMs, side by side. If you're looking for a SD install that leaves the Nook's main storage untouched, you're in the wrong place (see my sig).
This guide takes advantage of the multiboot functionality built-in to CM7.1 nightlies since about #140. As such, it is not compatible with CM7.0.x builds or with earlier boot menus.
What you'll get: Whatever two ROMs you install, each will have a nearly 2GB /data partition for apps and they will share a nearly 2GB /media partition for storage, and both will have access to the SD card for more storage. At startup you will see either a small green bar labeled "CyanogenMod," or the word "cyanoboot" in blue. Both boot menus work the same:
Do nothing, and your primary system will boot
Hold down both volume buttons, and your alternate system will boot
Hold down 'n' for a more detailed boot menu
Hold 'n'+power and recovery will boot (if you installed CWM internally).
All of these actions must be taken in the first couple seconds, before a "loading" message appears below the logo. Once you see a confirmation message, you can release all buttons.
DISCLAIMER: As usual, YOU are responsible for changes YOU make to YOUR device. This process is intermediate difficulty level. It probably shouldn't be the first thing you've ever done with ClockworkMod Recovery, and you probably shouldn't just follow the steps if you don't understand them. If you don't know how your NC is currently partitioned, turn back now. If you want to preserve your warranty, turn back now. Here be serpents; be so warned.
Following the guide as-is with all default options gets you a stock 1.4.1* install on secondary and a CM7 install on primary. I hope you can figure out what to substitute where for different results.
*I don't have access to a CWM-flashable 1.4.2 zip right now, but there are instructions for making one here.
The Guide
Prerequisites:
CWM on either SD or internal recovery (internal recommended)
Wi-Fi access
Materials:
repartitionDual2GBdata
BNpri2alt
reformatData
1.4.1-keep-CWM (IF you're not starting with an up-to-date stock install)
CM7.1+ OR MiRaGe's CM7.2 OR unofficial CM9 nightlies (w/ compatible gapps)
CM7 gapps(look near the bottom of the page)
Steps:
Put all materials in your SD card's root directory (DO NOT UNZIP).
Boot into CWM.
From CWM main menu, "backup and restore" and "backup."
From CWM main menu, "install zip from sdcard," and "choose zip from sdcard."
Choose the repartitionDual2GB file.
Reboot recovery. If you have internal CWM and no boot menu, you may need to use the rhythm method:
verygreen said:
hold nook N key and then press and hold power until the {first} message appears and then disappears with screen going blank. Release power button, then press it again and hold for ~5 seconds, the {first} message should be on the screen for three seconds or so before you release power button, keep holding N button until screen blanks again. If the screen went off while you were holding the power key, that means you were holding it for too long
Click to expand...
Click to collapse
Repeat step 4 and choose reformatData
If your backup in step 3 was stock, you can "backup and restore" then "restore" and skip to step 13.
Otherwise, repeat step 4 and choose 1.4.1-keep-CWM.
When it finishes, hold the power button to shut down, remove your CWM card (if applicable), and power back on.
Complete B&N registration process¹
Power off and boot back into CWM (may require rhythm method above).
Repeat step 4 and choose BNpri2alt.
From CWM main menu, in "mounts and storage," format system, data, and cache.
From CWM main menu, choose "Advanced" and "Wipe dalvik cache."
Repeat step 4 and choose CM7 update zip.²
Reboot into main partition and set up Wi-Fi.
Reboot into alt partition (hit both volume buttons at once on "CyanogenMod" loading screen) to make sure it's working.
optional: install gapps, keysmod, etc from CWM.
¹Any mods you want to make to stock, do it now: update to a newer version, root with Manual Nooter (if rooting 1.4.x firmware, follow the linked instructions but use MN 5.12.20), flash keysmod, overclock kernels, or anything else CWM-flashable.
²If you backed up an existing CM7/9 install in step 3, then after step 16 just install gapps, install keysmod if you want it, then from CWM's main menu, Backup & restore > Advanced Restore, and restore data only from your most recent backup. When you boot into CM7 (not tested with CM9), it will be just like you left it.³
³Steps 17 and 18 may look unnecessary, but several users experienced force closes in their CM7 installs when they didn't take these steps.
Other Resources:
CMpri2alt: Moves a CyanogenMod install from the primary partition set to the alternate partition set
BNalt2pri: Moves a stock install from the alternate partition set to the primary partition set
CMalt2pri: Moves a CyanogenMod install from the alternate partition set to the primary partition set
Revert dual boot: deletes the alternate partition set and alternate boot files. Does not restore stock partition sizes, but must be run prior to partitioning back to stock.
1.4.1 full restore: removes CWM from internal recovery, does not affect partitioning
1.4.1-to-alt-partition: updates any existing stock install on the dual boot partition (removes root, does not remove installed apps)
Steps to back up and/or update both partitions
Instructions to rename boot files created with j4mm3r's old multiboot
Possible fix for rooted stock boot-looping at 'n' screen on secondary
Credits:
repartitionDual2GB and reformatData provided by DeanGibson
1.4.1 zips provided by rajendra82
possible boot-loop fix provided by sryan1983
BNpri2alt, BNalt2pri, CMpri2alt and CMalt2pri are minor alterations of DeanGibson's files
revert-dualboot is a minor alteration of rookie1's remove-dualboot
Racks11479 provided key info for the above alterations
________________________________________________________
Old Resources (Do Not Use with Current Method):
prep-dualboot
froyo-to-dualboot
Remove dual boot: returns partitioning altered with prep-dualboot to stock (1GB/5GB, non-blue-dot)
1.2 full restore: removes CWM from internal recovery, does not affect partitioning
1.3-to-alt-partition: updates any existing stock install on the dual boot partition (removes root, does not remove installed apps)
Video documenting setup for a CM9 (Ice Cream Sandwich Alpha) dual boot with Nook Color stock 1.4.1
Old Credits:
1.2 full restore provided by nemith: thank here
prep dual boot and remove dual boot by rookie1: thank here
froyo-to-dualboot from jasoraso: thank here
1.4-to-alt from jasoraso: thank here
You can thank me with the button below, or if you feel real strongly about it, you can make a donation at my blog.
UPDATE 5/25/12: Removed the prerequisite for 1GB/5GB partitioning. A little bird named jicama confirmed that the newer partitioning script doesn't care if you start with a blue dot NC. Prep-dualboot would carve the alt partitions out of /media, which doesn't work if /media's not big enough. RepartitionDual just deletes the last three partitions (/system, /data and /media) and makes new partitions from the now-unallocated space, so as long as you have the right number of partitions, it doesn't matter how big they are.
Added to my Subscribed list !! ...Thank you
I'm getting more daring , so I went through this step-by-step this afternoon (thanks for the guide!).
This was a fresh install into a previously stock Nook (I was running CM7 through the SD).
Booting into stock 1.3 works fine - no difference at all.
In CM7, however, I'm having some problems. I installed nightly 201, which worked fine from the SD card. When I boot into CM7, I get a couple "android.process.media" errors at startup, and again when I try to start Market, which just hangs up after a couple of error message popups. I tried to reinstall 201 through CWM which didn't help.
Any ideas? Should I try a different nightly build?
EDIT: also tried 202 with the same results.
oppy said:
I'm getting more daring , so I went through this step-by-step this afternoon (thanks for the guide!).
This was a fresh install into a previously stock Nook (I was running CM7 through the SD).
Booting into stock 1.3 works fine - no difference at all.
In CM7, however, I'm having some problems. I installed nightly 201, which worked fine from the SD card. When I boot into CM7, I get a couple "android.process.media" errors at startup, and again when I try to start Market, which just hangs up after a couple of error message popups. I tried to reinstall 201 through CWM which didn't help.
Any ideas? Should I try a different nightly build?
EDIT: also tried 202 with the same results.
Click to expand...
Click to collapse
You wiped system, data, and cache after running froyo-to-dualboot and before installing CM7? Try wiping dalvik cache, too (under Advanced in CWM), and boot into both partitions after installing CM7 but before gapps or any other packages/restores.
Taosaur said:
You wiped system, data, and cache after running froyo-to-dualboot and before installing CM7?
Click to expand...
Click to collapse
Yes.
Try wiping dalvik cache, too (under Advanced in CWM), and boot into both partitions after installing CM7 but before gapps or any other packages/restores.
Click to expand...
Click to collapse
Okay, I'll do that and post results. Thanks.
EDIT: Looks like that did it. Seems to work fine, other than some app FCs, which, from what I've read, are fairly common. Thanks for the assist!
I worked that info into the OP. I've done this process twice now without taking those steps and without getting FCs, but you're not the first to report them.
I was a bit confused about the backup and restore part also. Seeing as my Nook was stock to start, I probably didn't need to do that step, and might have actually caused a problem or two by restoring data that didn't exist to start.
Still working great. The only FCs I've had so far were while trying to run Facebook.
Excellent guide! Thanks for all the work on this, it works great.
This is an awesome guide. Thanks for the help. I've been wanting to do this for a while.
Thanks man.
I appreciate you putting all the tools in one place, and I especially appreciate you posting that us blue dot people needed to repartition to 1gb data before doing this; I should've figured that, but I didn't for some reason.
Moving 1.3 to the dual boot partition as I type
Question though; after I move 1.3 to the dual boot, can I still install modifications to it via CWM?
SCrid2000 said:
Question though; after I move 1.3 to the dual boot, can I still install modifications to it via CWM?
Click to expand...
Click to collapse
Short answer: no. As-is, most zips tell CWM to install them to the primary partition. You can modify them to to install to the secondary, but it's a lot simpler if you want to root, install keysmod, or overclock, to do it before you shuffle stock to secondary.
There's a decent chance rajendra82 or someone else will provide dual boot compatible versions of any future B&N software upgrades.
Taosaur said:
Short answer: no. As-is, most zips tell CWM to install them to the primary partition. You can modify them to to install to the secondary, but it's a lot simpler if you want to root, install keysmod, or overclock, to do it before you shuffle stock to secondary.
There's a decent chance rajendra82 or someone else will provide dual boot compatible versions of any future B&N software upgrades.
Click to expand...
Click to collapse
Thanks man. That's what I figured.
Question: what if I want to stick with Phiremod 6.3 instead of going to 7? Can I do all the steps outlined but just substitute 7 for 6.3? Thanks!
This is the best thing EVER. I got sick of the nook app on my CM7 build, so this worked flawlessly.
I am running the CM7.1.0 RC1 build, and everything runs smooth as silk
ChaOConnor said:
Question: what if I want to stick with Phiremod 6.3 instead of going to 7? Can I do all the steps outlined but just substitute 7 for 6.3? Thanks!
Click to expand...
Click to collapse
Negative, that's built on CM 7.0.3. You would have to use j4mm3r's multiboot and the matching stock-to-secondary file found in this thread: http://forum.xda-developers.com/showthread.php?t=1156909
Nevermind, dumb question.
Updated with a link to CM7.1 stable
I kept a stock install of 1.2 and installed phiremod 6.3 because the 7.2 links weren't working and I couldn't find one anywhere. How do I boot into the alt-partition on boot? There is no CM7 boot screen (google gears, maybe?) and pressing volume buttons several times throughout the entire boot didn't do it.
can somebody please tell me what I am doing wrong. I followed the steps, CM7 boots ok but when I use the alt, the nook gets stuck on the "n" screen.
TomMelee said:
I kept a stock install of 1.2 and installed phiremod 6.3 because the 7.2 links weren't working and I couldn't find one anywhere. How do I boot into the alt-partition on boot? There is no CM7 boot screen (google gears, maybe?) and pressing volume buttons several times throughout the entire boot didn't do it.
Click to expand...
Click to collapse
I'll just leave these here:
Taosaur said:
this guide is not compatible with CM 7.0.x sta(b)le releases, nor branch ROMs based on those builds
Click to expand...
Click to collapse
Taosaur said:
Phiremod 7+
Click to expand...
Click to collapse
Taosaur said:
ChaOConnor said:
Question: what if I want to stick with Phiremod 6.3 instead of going to 7? Can I do all the steps outlined but just substitute 7 for 6.3? Thanks!
Click to expand...
Click to collapse
Negative, that's built on CM 7.0.3.
Click to expand...
Click to collapse
Try installing regular CM 7.1.
rabi347 said:
can somebody please tell me what I am doing wrong. I followed the steps, CM7 boots ok but when I use the alt, the nook gets stuck on the "n" screen.
Click to expand...
Click to collapse
Sounds like you got close. I would say start over at step 5.
This thread is for noobs by noobs , a place to talk about the app so that we don't clutter the ROM threads .
I hope this works out and helps anyone including myself with using this app.
Here is another GUIDE by JJsax posted on The Root Of All EVO that is a lot more detailed then this one.
The Official forum for BootManager is Init2winit if you would like to learn even more about the app.
As I learn about this app ,as to how and what works with it I'll update this and maybe it will help everyone out that is trying to use BootManager.
This app also works with EVO 3D's with hboot 1.50 s-on
Thank XDA member mnomaanw for that information.
If you use this app and have the time to reply to this post , please share what ROMs you've got to work and a little info on how you installed it. This way I can add it to the op to make it easier and faster for everyone to find.
This is what I've learned so far.
How to install* ROMs via Boot Manager...
Thank seraph863 for filling me in and writing this up. I just changed a few details cause his was for a specific ROM.
MAKE SURE THE ROM IS ON THE ROOT OF YOUR SD CARD NOT IN ANY FOLDERS
1.)* PURCHASE Boot Manager. It does a License check upon boot, so your jacked version will just give you a headache. Seriously, I tried it. Doesn't work.
Here is a Market link to Boot Manager if you didn't already purchase it.
1.a) IF you didn't purchase it... WIPE ALL Boot Manager data and files, including the folder on your SD Card. Then buy it and let it setup again.
2.) Open SuperUser. Hit Menu -> Settings -> Disable Logging.
3. Open BootManager. If you're at work and on Wi-Fi, you may not pass the License check due to firewall issues. If you get a black screen, or license failures, switch to 3/4G and try again.
4.) If all is good, you're asked to Setup the Phone. Do so now. [ You will need to set up your Phone ROM any time you flash a new ROM or kernel to your phone ROM.]
5.) Once installed, hit Menu -> Settings -> Force Large Boot.img
6.) Swipe right to Slot 1. Hit Install .zip and browse to your downloaded ROM.zip file. Make sure to check the Wipe System, Data, and Cache boxes so that it will wipe before it flashes the ROM. Select EXT4 as the file structure.
[This is the important part. This build will take a LONG time. Do NOT use your phone while it is running.]
8.) Once the install has been successful if you need to flash a kernel , theme gapps etc..., go back to Slot 1 and select Install .zip (again). Choose the .zip file. Do NOT wipe system, data or cache. It will ask you to over write it just hit OK.
9.) You should now be ready to boot to your new ROM! Celebrate!
Since this is for the EVO 3D I recommend to always use ext4 as your file structure.
If you get any error messages start over.
Known working ROMs to my knowledge.
These are ROMs that I've set up.
Infected Eternity Phone ROM and sd ROM
KMyers CM7 beta 7.4* with gapps ext4 sd ROM
MeanROM ext4 sd ROM
TrevE Zone v2.3.12 ext4 phone and sd ROM
Mikrunny ext4 phone ROM and sd ROM
XDA members setups
JJsax setup
CDMA Evo3D
hboot 1.50 s-on
TWRP 2.0 touch recovery
Phone ROM SteeleROM 2.73
ROM1 CM9 (The latest version couple days old)
ROM2 Evervolve ICS
mnomaanw's set up
PhoneROM: ViperROM Redline v2.5 RC2
ROM1:CyanogenMOD9
ROM2:MIUI v2.1.6
I've found it to work better to flash and set up my ROM on the phone ROM and then back it up and restore it to a slot.
If your having problems restoring backups and your using TWRP recovery try using CWM. I was having issues with TWRP and since I went back to CWM (touch and 5.0.2.0 both work great but there is no usb mount on the touch version) and I haven't had a single issue restoring a backup to a ROM slot.
My setup will be changing all the time.
CDMA EVO 3D
Eng Hboot s-off
Radio 1.06.00.1216
Phone ROM Infected Eternity Sense 3.0
ROM1 Mikrunny
ROM2 EVOZone
ROM3 SteelROM
ROM4 MeanROM Aria51
Thank you for putting this here. I know I'm to blame for going off topic in some threads about Boot Manager.
I too am having issues getting a ROM to load into slot 1.
Here's my setup...
SteeleROM 2.73
Anthrax #2 kernel
Over 5GB of storage space available.
HBOOT 1.50
TWRP 2.0 recovery (the newest touch one)
I load steele just fine as the phone ROM then try to load CM9, or whatever other ROM into slot 1 it goes through everything then it get's killed at mounting img's. I have it setup for screen on, to load large files, and I even have SU logging turned off. This happens everytime I try to load a ROM into slot 1 it just kills it and never finishes 100%
JJsax said:
Thank you for putting this here. I know I'm to blame for going off topic in some threads about Boot Manager.
I too am having issues getting a ROM to load into slot 1.
Here's my setup...
SteeleROM 2.73
Anthrax #2 kernel
Over 5GB of storage space available.
HBOOT 1.50
TWRP 2.0 recovery (the newest touch one)
I load steele just fine as the phone ROM then try to load CM9, or whatever other ROM into slot 1 it goes through everything then it get's killed at mounting img's. I have it setup for screen on, to load large files, and I even have SU logging turned off. This happens everytime I try to load a ROM into slot 1 it just kills it and never finishes 100%
Click to expand...
Click to collapse
Mine say they install fine and they finish but when I hit boot to the slot it just gets stuck on the splash screen.
I had TrevE Zone on my phone ROM but just switched to eternity. I got MeanROM to install in slot 2 and it booted up fine and is running great but thats the only one I out of the 3 I tried. I set the boot.img to large or what ever the setting is cause thats what they said to do in the video on the site for the app. My real issue though is that restoring my backup to a slot it installs to my system memory. I would like to be able to install backups cause I've read they run better. Hopefully some that knows more about this will come in here and school us a little, I'll even add it to the op and make this a guide if we get enough info.
Here's my quick and dirty instructable I posted in the CM9 thread.
How to install this via Boot Manager...
1.) PURCHASE Boot Manager. It does a License check upon boot, so your cracked version will just give you a headache. Seriously, I tried it. Doesn't work.
1.a) IF you didn't purchase it... delete ALL Boot Manager files, including the folder on your SD Card. Then buy it and let it setup again.
2.) Open SuperUser. Hit Menu -> Settings -> Disable Logging
3. Open BM. If you're at work and on Wi-Fi, you may not pass the License check due to firewall issues. If you get a black screen, or license failures, uninstall BM and delete the folder. Switch to 3/4G and try again.
4.) If all is good, you're asked to Setup the Phone. Do so now.
5.) Once installed, hit Menu -> Settings -> Force Large Boot.img
6.) Swipe right to Slot 1. Hit Install .zip and browse to your downloaded CM9 .zip file. Wipe System, Data, and Cache. Select EXT4 as the file structure
7.) This is the important part. This build will take a LONG time. Do NOT use your phone while it is running.
8.) Once the install has been successful, go back to Slot 1 and select Install .zip (again). Choose the Google Apps .zip file. Do NOT wipe system, data or cache.
9.) You should now be ready to boot to your new ROM! Celebrate!
Warning: Several users report to NOT use any Backup app such as Titanium to restore your apps and data, since the apps on this ROM are very very different. Your mileage may vary.
FYI I'm doing this by memory, so the minor steps might not be accurate (i.e. disable Superuser logging).
If you get any error messages, start over. I assure you, this process worked for me step by step.
Go to their official forum
Applications-->boot manager
You will find my thread named [REF]working and not working rom list
There are many phones
And if you test a rom that is not listed please report if it is working or not
Thanks
Sent from my HTC Desire S using XDA Premium App
I saw your guide in the cm9 thread and tried it with no luck I did exactly what you said and everything seemed to go fine but when I hit boot to ROM on slot one where I installed the ROM I'm stuck on the splash screen. Any ideas why? Thanks for the help also.
kylon said:
Go to their official forum
Applications-->boot manager
You will find my thread named [REF]working and not working rom list
There are many phones
And if you test a rom that is not listed please report if it is working or not
Thanks
Sent from my HTC Desire S using XDA Premium App
Click to expand...
Click to collapse
I was on there I even posted my issue and my log but haven't gotten any help. I did see your list of ROMs but didn't know if its up to date.
I'll have another look at it cause I really want to get this to work and its driving me crazy cause I can usually figure problems out on my own or by searching but I just can't get this.
Thanks for the replies.
linsalata28 said:
I saw your guide in the cm9 thread and tried it with no luck I did exactly what you said and everything seemed to go fine but when I hit boot to ROM on slot one where I installed the ROM I'm stuck on the splash screen. Any ideas why? Thanks for the help also.
Click to expand...
Click to collapse
Which ROM are you using?
I would start over. Use a file manager to delete your ROM from the SD Card and take another image. Make sure you have plenty of storage on your SD card. You could also try clearing the Cache and Dalvik.
You can always get back to your phone ROM manually by booting to Recovery and flashing sdcard\bootmanager\phonerom\update.zip
Edit: Don't forget to check "Use Large boot.img" within Boot Manager
seraph863 said:
Which ROM are you using?
I would start over. Use a file manager to delete your ROM from the SD Card and take another image. Make sure you have plenty of storage on your SD card. You could also try clearing the Cache and Dalvik.
You can always get back to your phone ROM manually by booting to Recovery and flashing sdcard\bootmanager\phonerom\update.zip
Edit: Don't forget to check "Use Large boot.img" within Boot Manager
Click to expand...
Click to collapse
Should I just delete the whole bootmanager folder and clear the data for the app also?
another thing is why when I restore a backup to a slot its installing to my internal memory?
Yeah I just had another look at your list and there aren't many ROMs for this phone on there and they look old.
Thanks again for the help.
It up to date
Anyway gflame is busy
What do you do to install the rom
And wich rom?
Sent from my HTC Desire S using XDA Premium App
I wiped everything out and starting over. I'm going to just try and install viperom in one slot and see if that boots, then I'm going to try and restore a backup to another slot from within a ROM slot to see if that will fix my internal memory issue cause it wont have anywhere to install to . I'll post back with what happens.
kylon said:
It up to date
Anyway gflame is busy
What do you do to install the rom
And wich rom?
Sent from my HTC Desire S using XDA Premium App
Click to expand...
Click to collapse
I disabled logging in su checked off larg boot.img then whet to slot one hit install zip choose cm9 ext4 then checked all the wipe opinions, when that finished I flashed the gapps the same way but without wiping . Everything finished with that I didn't get any errors but when I went to boot to that slot it just hung at the splash screen.
I did that 2 times with cm9 , 1 time with the Eternity ROM sense 3.0 r130 , 1 time with Team Nocturnal's Blackened ROM and they all got stuck at the splash screen.
I did get MeanROM to work using those same steps last night.
Now with the restore of my backup I did basically the same thing but it doesn't give any wipe options when you install it but it would get an error saying boot.img something like that and then I would get a low memory popup saying I only had about 30mb left internal memory when I had over 800mb when I started.
Edit: I have about 6gb free on a 16gb class 10 sd card. I believe its a Samsung card I think.
Edit2: I finished flashing viperom and now that to is stuck on the splash screen. Is there a way to wipe caches for that slot and fix permissions like you would for a regular ROM in recovery if something like this happened.
I'm really starting to think I wasted $3 this is very frustrating sorry.
Thanks for your replies and trying to help.
I went into recovery to go to flash the update zip to restore my phone ROM but when I open the bootmanager folder I don't see anything in it. I'm using twrp 2.0 recovery. Could this have something to do with my problems?
linsalata28 said:
I went into recovery to go to flash the update zip to restore my phone ROM but when I open the bootmanager folder I don't see anything in it. I'm using twrp 2.0 recovery. Could this have something to do with my problems?
Click to expand...
Click to collapse
The steps in your previous post were all correct, except you said you turned OFF "Use large boot.img" ? Make sure that option is ENABLED (has an X on it)
I'm confused as to why the app is trying to install to your internal memory... Mine installs to my SD Card. Make sure the USB cable is not plugged into the phone, and try increasing your screen timeout so it doesn't sleep during the install.
The fact that you're getting the splash screen means you're getting somewhere. Maybe you're being too impatient on the install? Wait a few minutes even after it says Install Complete before continuing.
seraph863 said:
The steps in your previous post were all correct, except you said you turned OFF "Use large boot.img" ? Make sure that option is ENABLED (has an X on it)
I'm confused as to why the app is trying to install to your internal memory... Mine installs to my SD Card. Make sure the USB cable is not plugged into the phone, and try increasing your screen timeout so it doesn't sleep during the install.
The fact that you're getting the splash screen means you're getting somewhere. Maybe you're being too impatient on the install? Wait a few minutes even after it says Install Complete before continuing.
Click to expand...
Click to collapse
I said I checked the larger boot.img off meaning it was enabled sorry for that misunderstanding. I flashed 2 of the slots last night and didn't even test them till today so I don't think that its cause I'm not waiting long enough. Why would none of the folders inside of the bootmanager folder show up in twrp recovery? Could I copy and paste the phone update.zip to the root of my sd card so that I can recover without having to nand restore cause I've already wiped and restored about 10 times trying to get this to work.
Sent from my Eternity 3D using tapatalk
linsalata28 said:
I disabled logging in su checked off larg boot.img then whet to slot one hit install zip choose cm9 ext4 then checked all the wipe opinions, when that finished I flashed the gapps the same way but without wiping . Everything finished with that I didn't get any errors but when I went to boot to that slot it just hung at the splash screen.
I did that 2 times with cm9 , 1 time with the Eternity ROM sense 3.0 r130 , 1 time with Team Nocturnal's Blackened ROM and they all got stuck at the splash screen.
I did get MeanROM to work using those same steps last night.
Now with the restore of my backup I did basically the same thing but it doesn't give any wipe options when you install it but it would get an error saying boot.img something like that and then I would get a low memory popup saying I only had about 30mb left internal memory when I had over 800mb when I started.
Edit: I have about 6gb free on a 16gb class 10 sd card. I believe its a Samsung card I think.
Edit2: I finished flashing viperom and now that to is stuck on the splash screen. Is there a way to wipe caches for that slot and fix permissions like you would for a regular ROM in recovery if something like this happened.
I'm really starting to think I wasted $3 this is very frustrating sorry.
Thanks for your replies and trying to help.
Click to expand...
Click to collapse
My phone:
Phone ROM: SteelROM 2.72
Slot 1: AOSP ICS - wifi doesn't work
Slot 2: CM9 - (google talk and books FC)
Slot 3: MIUI
Slot 4: CM7 (kmeyers)
Boot Manager has a problem trying to restore from a NAND backup, it did the same thing to me where it was installing to the phone's internal memory. I was trying to figure out the problem, but I moved on without success.
I've had the best time installing tricking ROM's by this method. I installed CM7 to a slot, booted into CM7 and installed the ICS and CM9 from there. It's been pretty successful.
If you are getting it to freeze with mounting images, I came across this issue because my SD card did not have enough room. You can try to free up some more space to see if this is the same issue.
I had most problems installing due to not enough space on my SD card, I now have a 32gb card, and have had no issues
Also, I've never had to set it to large boot.img to get things to work, and make sure you disable logging in SU, and use EXT4
---------- Post added at 02:08 PM ---------- Previous post was at 02:04 PM ----------
linsalata28 said:
I said I checked the larger boot.img off meaning it was enabled sorry for that misunderstanding. I flashed 2 of the slots last night and didn't even test them till today so I don't think that its cause I'm not waiting long enough. Why would none of the folders inside of the bootmanager folder show up in twrp recovery? Could I copy and paste the phone update.zip to the root of my sd card so that I can recover without having to nand restore cause I've already wiped and restored about 10 times trying to get this to work.
Sent from my Eternity 3D using tapatalk
Click to expand...
Click to collapse
To quickly get back to your phone ROM (make sure you setup your phoneRom in boot manager first to create the update.zip file, you need to recreate this anytime you change the ROM or Kernel for your phoneROM)
Boot into Recovery
Install the update.zip inside the \boot manager\phonerom\update.zip (not sure if location is accurate, but you get the idea)
Reboot system
Phone should boot to phone ROM, or you can install any other update.zip from your slots, to boot to them etc
spookytay said:
My phone:
Phone ROM: SteelROM 2.72
Slot 1: AOSP ICS - wifi doesn't work
Slot 2: CM9 - (google talk and books FC)
Slot 3: MIUI
Slot 4: CM7 (kmeyers)
Boot Manager has a problem trying to restore from a NAND backup, it did the same thing to me where it was installing to the phone's internal memory. I was trying to figure out the problem, but I moved on without success.
I've had the best time installing tricking ROM's by this method. I installed CM7 to a slot, booted into CM7 and installed the ICS and CM9 from there. It's been pretty successful.
If you are getting it to freeze with mounting images, I came across this issue because my SD card did not have enough room. You can try to free up some more space to see if this is the same issue.
I had most problems installing due to not enough space on my SD card, I now have a 32gb card, and have had no issues
Also, I've never had to set it to large boot.img to get things to work, and make sure you disable logging in SU, and use EXT4
---------- Post added at 02:08 PM ---------- Previous post was at 02:04 PM ----------
To quickly get back to your phone ROM (make sure you setup your phoneRom in boot manager first to create the update.zip file, you need to recreate this anytime you change the ROM or Kernel for your phoneROM)
Boot into Recovery
Install the update.zip inside the \boot manager\phonerom\update.zip (not sure if location is accurate, but you get the idea)
Reboot system
Phone should boot to phone ROM, or you can install any other update.zip from your slots, to boot to them etc
Click to expand...
Click to collapse
What cm7 ROM would you recommend ? For some reason I couldn't see files inside of the BootManager folder but I checked and they are there. I have about 5gb free on a 16gb card ,I was looking into getting a 32gb if I get this app working.
Sent from my Eternity 3D using tapatalk
try
http://forum.xda-developers.com/showthread.php?t=1393613
I upgraded my card, I had about 3-4 gb free and was having problems, but once I upgraded I haven't had many since
I've purchased boot manager and when i run it, it says "application not licenced" Any fix?
spookytay said:
try
http://forum.xda-developers.com/showthread.php?t=1393613
I upgraded my card, I had about 3-4 gb free and was having problems, but once I upgraded I haven't had many since
Click to expand...
Click to collapse
cm7 worked thanks.
[See post http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123 for the new version of this post with updated links/pointers to Succulent's recent CM10.1 builds as well as CWM/TWRP recovery tool compilation].
[Caveat emptor: adopt/follow this guide at your own risk].
I've been running CM10 build by XDA Developer Succulent version 12/08 on SD card since its release ten days ago, and its reliable/stable performance has crossed the threshold for me to finally take the plunge and install it internally on emmc.
FWIW, here the process I used to install CM10 internally on my 16GB Nook Tablet (i.e., on its emmc).
Using a disk partition tool (such as MiniTool Partition Wizard Home Edition) create on SD card a Primary FAT32 partition, and set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag. Once this is done, the partition should appear as a (read/write accessible) drive under Windows. If you are going to use this card for backing up your NT, keep in mind that each backup will require at least 600MB (for a barebone stock or CM config) and size the partition accordingly.
Obtain and copy to the SD card the following files:
MLO, u-boot.bin, and flashing_boot.img in SD_boot.zip obtained from http://iamafanof.wordpress.com/2012/11/11/how-to-guide-bootable-cm7cm9cm10-sdcard-for-nook-tablet/
either one of the two recovery program image files: cwm_6012_sd.img (ClockworkMod Recovery (aka CWM)) in CM9-10_CWM_v6.0.1.2_8-16gb_tools_sdcard.zip, or twrp_2220_sd.img (TeamWin Recovery Project (aka TWRP)) in CM9-10_TWRP_v2.2.2.0_8-16gb_tools_sdcard.zip from http://forum.xda-developers.com/showthread.php?t=1640958, rename it to recovery.img. If you want to try out (or use) both, name your alternate choice altboot.img.
the file cm-10-yyyymmdd-UNOFFICIAL-acclaim.zip from http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/
the file gapps-jb-20121011-signed.zip from http://goo.im/gapps/gapps-jb-20121011-signed.zip
Put the SD card into the NT, and boot from its power off by inserting a powered USB cable. Press and hold the N button as soon as CyanoBoot comes up to get the boot menu to display.
Select either SDC Recovery (or Alternate Boot depending on which recovery tool you want to use).
Select Backup to backup your current NT config (/boot, /recovery, /system, and /data). Before proceeding to next step, see note (ii) near the end of this post.
Select Wipe data & factory reset.
Select install zip from SD card and install cm-10 zip file.
Select install zip from SD card and install gapps zip file.
Select power of and remove SD card from NT and power NT on again using the power button (alternatively you can just remove SD card and select reboot).
Once the NT boots up, set up the wifi connectivity and your google account info. If you had previously used Google backup service your apps will be auto-downloaded (but their settings will not be auto-restored)
A few additional points worth noting:
Installing CM10 ROM and gapps will override your NT's BN-provided boot, recovery, ROM, and Apps, so make sure that you backup all this stuff using backup process in step #5 above, safekeep the backup data on your PC/Laptop and better yet archive it on CD/DVD. Your media files in the NT media partition BN allocates for user should be intact.
To play it safe you should do the above in 2 phases: steps 1 through 5, then exit recovery and remove and mount SD card on PC to verify that backup data got newly created; then insert SD card and continue steps 6 through 9.
CWM and TWRP use different backup archive formats, so keep this in mind if you decide to switch. Furthermore, CWM has changed its archive format going from release 5.x to 6.x, so I think it would be prudent to save a copy of the recovery program together with the backup data it generated. (FWIW I prefer the tar/zip compatible backup data structure TWRP uses (which CWM 5.x had also used) over the BLOb structure which CWM 6.x use -- but YMMV).
To restore from backup data, boot into SD card and select from boot menu the same recovery program that was used to create the backup data, then select the particular backup dataset (indexed by date/time) you want to reinstall on your NT.
I would advise against blindly using other functions of the CWM and TWRP without looking up info and researching to understand what they really do.
See my post at http://forum.xda-developers.com/showthread.php?p=48612997#post48612997 for more "Info and Tips for Mitigating Risks in Rooting and Flashing Custom-ROM".
My thanks to all the developers who collective work created this wonderful ROM as well as the tools and info I made use of to install it. IMHO this ROM helps make the Nook Tablet one of the best-value tablets for the money (at least at the moment).
great post...fwiw here's my experience to get two NT16's up and running (I started with an old CM7 on both of them).
Backup nook with titanium backup on existing 32GB card.
Take screenshots for replacements
Reset nook to stock (1.4.2) and update to latest (1.4.3) with a fresh SD Card with repart.img copied to root (my red 2GB card):
http://raywaldo.com/2012/06/make-unbrick-repartition-image/
http://www.youtube.com/watch?v=Nu6e4m62tFc
c. 1.4.3 can be downloaded from B&N site directly. (http://www.barnesandnoble.com/u/Software-Updates-NOOK-Tablet/379003187/)
Create a CWM SD Card (ideally 4GB SanDisk) as per these instructions - http://raywaldo.com/2012/05/root-nook-tablet-with-cwm-sdcard/
Copy CM7 BETA and compatible GAPPS onto this card or another blank one. You can get the files from here: http://forum.xda-developers.com/showthread.php?t=1481826 and http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
Boot into this CWM Card, wipe data/wipe cache and dalvik cache. Install zip from sdcard (either current or pop in the new one). Choose cm-7 beta first, then gapps. Remove sd card. Reboot. Wait a while for it to set itself up.
Go into settings/applications and clear the cache for google market/play.
You now have CM7 installed and can setup the basics (google, wifi etc..)
Insert your 32GB (or 16 or 8 or whatever) Sandisk SD Card (it should ideally have the Titanium Backup folder from step 1, any media you want in Music and Movies folder and the CM10 and gapps zip in the downloads folder -- and that's it!)
Once mounted, download Goo Manager from the google play store and run it, accepting superuser requests.
Choose settings menu and "Install OpenRecoveryScript" and it should install openrecovery twrp recovery manager. Once it has installed and informed you of success, reboot into recovery (this is important), upon reboot hold the "n" and choose internal emmc recovery from the menu.
You will now find yourself in TWRP. From the install menu, add the CM10 PURE AOSP 4.1.2 JBV06.1-Hashcode and then the gapps-jb-20121011-signed.zip and swipe to confirm flash. This is it. Fingers Crossed!
NOTE: On one NT 16 (I have two), step 12 DID NOT WORK. It wouldn't install the CM10...zip -- and simply rebooted itself or hung...so I powered off, and rebooted to the CWM Card in #6..and used CWM to wipe caches etc… and then installed the two zips...and voila.
hope it helps.
digixmax said:
I've been running CM10 build by XDA Developer Succulent version 12/08 on SD card since its release ten days ago, and its reliable/stable performance has crossed the threshold for me to finally take the plunge and install it internally on emmc.
Click to expand...
Click to collapse
How do you feel about it now that you've installed it internally? I took the plunge as well today, but I'm not sure it's runs any better internally than it does from the sd card. Having said that, it runs so incredibly well from the card, so it's really hard to beat, but still... I'm actually having more issues with the internal install than the sd version.
I had had enough of the stock reader (that I'm actually pretty fond of) not remembering my place in sideloaded books, so I didn't feel I had anything to loose and am glad I made the install though. Installed once makes it easier to reinstall when an even better build comes along.
I made the switch since the stock ROM was so barebone and clumsy I virtually never use it since I had the NT, and the rooted stock ROM is just marginally better -- I found out there are so many apps I 've been using on CM10 that are simply not available for BN's (Android) Gingerbread. I also like the fact that I can now reboot (if ever needed) untethered.
I think performance-wise it runs about the same as it was running on SD, if it's better then it's not yet noticeable.
What kind of issues are you having with your new setup?
Some apps misbehaved. Didn't install properly or gave error messages. I decided to re flash and this this second install hasn't had any issues at all. Same files from the same card.
It is nice to have it internally and be able to switch sd cards should I want to.
Sent from my Barnes & Noble Nook Tablet using Tapatalk 2 and SwiftKey
I ran into a problem with v12/08: when I connect the NT to the PC I do not get the “USB connected” notification with option to “turn on the USB storage”, and thus cannot access neither the emmc media partition nor the sdcard. The problem exists with both CM10 running on emmc and running on sdcard. Furthermore when running on sdcard, hitting “storage” in “settings” results in a force-close of “settings”.
I am curious if anyone else has the same problem, or I am just missing some setup setting somewhere.
In the meantime, I am back to running another ROM off SD.
Those storage setting issue I had with the 1118 build but not with later ones. Connection to PC work fine but I don't think I need to do the turn on USB thing. No PC nearby at the moment
Edit: I am now near a PC, and I do get the "touch to turn on USB" or words to that effect. So it works as it should..
Sent from my Nook Tablet using Tapatalk 2 and SwiftKey
Thanks, I've tried reinstalling a couple of times (as well as installing a different ROM) without success.
I found the answer to my problem: I was used to getting the full-screen alert “USB mass storage” (upon insertion of tethered USB cable), and didn’t notice the tiny alert “USB connected” on the status bar (which when pulled down would in turn launch the “USB mass storage” alert).
Question: I'm not new to rooting and flashing, but am new to NT. I rooted my wifes NT, installed a launcher to switch back and forth, and loaded a few apps. I did not change the stock recovery and used a boot sdcard to run an older version of CWM. I forgot to hack OTA off so while messing around the darn thing upgraded to 1.4.3. The stock rom is such an old version of GB it is really worthless. So here is my question. Can I use this method to go directly to CM10? Im not too concerned about the issues mentioned in this thread, but more concerned about the method and the type of issues I might encounter. I see some threads say to flash CM 7 first, why I'm not sure. It almost looks to simple. Just looking for confidence. If it were mine I wouldnt care. Thanks for any help.
Sent from my SAMSUNG-SGH-I317 using xda premium
Dean1650 said:
Question: I'm not new to rooting and flashing, but am new to NT. I rooted my wifes NT, installed a launcher to switch back and forth, and loaded a few apps. I did not change the stock recovery and used a boot sdcard to run an older version of CWM. I forgot to hack OTA off so while messing around the darn thing upgraded to 1.4.3. The stock rom is such an old version of GB it is really worthless. So here is my question. Can I use this method to go directly to CM10? Im not too concerned about the issues mentioned in this thread, but more concerned about the method and the type of issues I might encounter. I see some threads say to flash CM 7 first, why I'm not sure. It almost looks to simple. Just looking for confidence. If it were mine I wouldnt care. Thanks for any help.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Cm7 is a gingerbread rom, it can be flashed by cwm 5 and 6 both. But cm10 is jellybean and must be flashed with cwm 6 only (or twrp) . And once you have cm7, you get cyanoboot (2nd bootloader) which is necessary to load cwm6, whether its internally flashed recovery or SD card recovery.
If you still have your bootable SD card, boot into recovery and check the version (cwm 5 most likely) , then do the longer, but simpler method - stock > cm7 > flash cwm6 internal and boot into it from cyanoboot > cm10.
I see the difference between the 2 methods..a few more questions. I dont see where or how recovery gets flashed in the first method. Looks like either/both are used but not flashed. In both methods, I dont see any sdcard additional partition requirements so can I assume everything can get copied to the boot partition? Haven't looked at the card I made yet, but if CWM is current enough for CM7 it should work fine. I appreciate this thread. It has cleared up a lot of questions.
Sent from my SAMSUNG-SGH-I317 using xda premium
Dean1650 said:
...
I forgot to hack OTA off so while messing around the darn thing upgraded to 1.4.3. The stock rom is such an old version of GB it is really worthless. So here is my question. Can I use this method to go directly to CM10? Im not too concerned about the issues mentioned in this thread, but more concerned about the method and the type of issues I might encounter. I see some threads say to flash CM 7 first, why I'm not sure. It almost looks to simple. Just looking for confidence. If it were mine I wouldnt care. Thanks for any help.
Click to expand...
Click to collapse
Yes, you can use this process to go directly from stock or rooted stock to CM10 -- I used it to go from rooted 1.4.3 directly to CM10. With SD-based flash, there is no need to go the circuitous multi-stage flashing process.
And if you use Succulent's CM10 builds from http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/ his ROM zip files all include emmc recovery so you don't even have to separately flash recovery as you would have with other ROMs. I think his approach, in addition to being convenient, has the benefit of avoiding intermediate states where there is potential incompatibility between ROM and recovery versions (which I think is conducive to causing bootloop).
Of course if for some reason you later prefer a different version of recovery than the one he includes (CWM 6.0.2.5) you can always reflash your particular choice of recovery by itself.
FWIW I am running Succulent's cm-10-20121225-acclaim-HD.zip (GCC 4.6) at the moment and it works great.
Dean1650 said:
I see the difference between the 2 methods..a few more questions. I dont see where or how recovery gets flashed in the first method. Looks like either/both are used but not flashed. In both methods, I dont see any sdcard additional partition requirements so can I assume everything can get copied to the boot partition? Haven't looked at the card I made yet, but if CWM is current enough for CM7 it should work fine. I appreciate this thread. It has cleared up a lot of questions.
Click to expand...
Click to collapse
Everything that gets flashed via recovery (either CWM or TWRP) comes in zip archive form, and this applies to ROM, gapps, as well as recovery itself. (If you ever want to flash recovery, the simplest way is to get a recovery zip file, such as one of those with keyword emmc from http://forum.xda-developers.com/showthread.php?t=1640958, and flash it from SD using the process in the first post, just as you would flash a ROM build or gapps).
If you are curious about what gets installed and where, just open (but don't extract) the to-be-flashed zip file (e.g., using winrar/winzip/7-zip): everything except the META-INF folder is what get installed, and the updater-script file in META-INF\com\google\android\ (which you can open using a text editor like notepad) contains installation script detailing where (i.e., which partition on the NT) various components of the zip file get installed.
Typical ROM builds zip contain boot.img which gets installed on /boot partition, and a bunch of system files and apps to be installed on /system partition. Succulent's ROM builds also include recovery which gets installed on /recovery partition. Finally gapps apps get installed on /system as well.
Really, really appreciate this OP, the replies, and the knowledge. VERY helpful. Wont do this til the 1st and will let you know the results... Again, THANKs
Sent from my SAMSUNG-SGH-I317 using xda premium
Well your method worked flawlessly. I had a few minor operator errors but it went just as you explained. I did, however, have a fatal bug in the rom. Not sure who to report it to, but while messing around in settings I tried to change the color of the clock in the status bar. It totally blew away systemui. I tried everything I knew of to restart and recover but had to resort to wipe/factory reset. Could not figure out what data file got corrupted. That in turn made me have to flash the gapps again because none of the Google apps worked including play store. The net result is to add 1 more step to your method. BEFORE messsing with settings, and after the initial setup is complete, boot to recovery and do another backup..I forgot to mention I flashed 20121231, which is the latest release. Thank you so much for your knowledge and reseach. STOCK ROOTED TO CM10 RELEASED.
Sent from my SAMSUNG-SGH-I317 using xda premium
Stuck on backup in CWM 6.0.1.2
My 16gbNT is currently running Team_B CM7. I'm trying to install Kuzma30's CM10.1 from a SD card. Following the instructions from this OP. While trying to perform my backup the process gets about 3/4 of the way through and then sticks at the file named "generic11.lda". It doesn't continue after that and I have left it alone for a considerable amount of time. Any idea what's causing the stick? I've tried it about three or four times with occasionally sticking at different files but it is still about 3/4 of the way through. Backup will not finish.
Any help is greatly appreciated.
I'd suggest trying a version of CWM that is considered compatible with CM7, e.g., CM7-9_CWM_v5.5.x_8gb-16gb_tools_sdcard.zip from http://forum.xda-developers.com/showthread.php?t=1640958 (but then remember to flash CM10.1 with 6.0.1.2).
Also check and make sure that you have enough space on your SDcard (you can/should remove backup data associated with failed partial backup attempts).
Backup success, Install failure
digixmax said:
I'd suggest trying a version of CWM that is considered compatible with CM7, e.g., CM7-9_CWM_v5.5.x_8gb-16gb_tools_sdcard.zip from http://forum.xda-developers.com/showthread.php?t=1640958 (but then remember to flash CM10.1 with 6.0.1.2).
Also check and make sure that you have enough space on your SDcard (you can/should remove backup data associated with failed partial backup attempts).
Click to expand...
Click to collapse
Backup successful! Thanks button pressed. Now on the install I used CWM 6.0.1.2 and I'm not allowed to complete the install. It aborts installation and gives the following error:
"Installing update...
set_perm: some changes failed
E:Error in /sdcard/cm-10.1-20130102-UNOFFICIAL-acclaim.zip
(Status 7)
Installation aborted."
Any ideas?
Your guide is quite clear but somehow it is not working for me. I have a fresh NT 8GB with stock 1.2 on it.
I obtained the 6 files you mention:
- u-boot.bin
- MLO
- flashing_boot.img
- recovery.img (= cwm_6012_sd.img)
- gapps-jb-20121011-signed.zip
- cm-10-20121231-NOOKTABLET-acclaim-HD.zip (from: http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/)
I copied them to a 16GB 10x SD card and placed the SD card in my NT.
The problem is that whatever I do, it always boots the stock os and never into Cyanoboot. I know I have to connect the NT to my computer with USB and wait for it to boot, but even then it only load the stock OS.
Am I doing something wrong here?
Help much appreciated!