Related
Hi. I'm a newbie, and probably should have known better.
I tried upgrading my sprint 6800 to the new rom, following this post:
http://forum.xda-developers.com/showthread.php?t=362563
The "Update your Hard-SPL to 2.40-olipro" step went fine, although I had to restart it after it was completed (later on, I saw something that said I should have used TTY at that point to set some variable after the install - whoops).
I installed the new ROM from the next step of that thread, and it did its thing without problems.
However, the phone will no longer boot! It freezes (or crashes?) on the Sprint welcome screen.
I tried doing the "hold soft-left, soft-right, and reset" thing, whatever that's called, and it appeared to go through its process of reseting something but it didn't make any difference.
I also tried formatting the SD card to fat32, and copying the embedded ROM file to "TITAIMG.nbh" on it as described by ImCoKeMaN in the thread posted above. I rebooted with the sd card in the phone, and tried doing that loading screen. Again, that didn't make any difference and it still freezes at the Sprint welcome screen.
Sorry for my lack of correct terminology - I'm still learning all this! If it helps, this is what shows on the Sprint welcome screen:
m 09
b 03
p ACAAAM-4070
r 1.32.00
d 3.16
I just went through the same thing. You have to load the latest radio rom 3.27.00. Put the phone in bootloader mode(hold down power button+camera button, then press soft reset). Run the radio rom update and you should be good.
Coodaddy
thanks for the fast response
that was all i needed to know... thanks!
This is what happened:
I received a used Alltel PPC6800. It had WM5 installed. I called Alltel to activate the phone. It activated and reset itself... to the bootloader. I couldn't get it out of the bootloader, so I thought what the hell, I'll upgrade to the latest ROM that HTC put out for the Alltel PPC 6800.
The ROM loaded fine, and upgraded to bootloader to SPL-2.07.. However, it was stuck in the bootloader. So, I did a soft reset. Windows 6 started up. Then it went to auto-install the Alltel custom software. Then it reset, and has been stuck in the bootloader screen ever since. It can't be hard reset, it can't be soft reset... reloading the ROM doesn't work. I can't try changing bootloader versions because I need to be in the OS to do that. I can't load an older ROM, because it won't let me do so... it fails at 1% and says something about an Invalid ROM.
Oh, and that titan_exitbl.exe program doesn't work. It just resets the phone back to the bootloader.
I will be mailing it out for an exchange in the morning unless someone here may know of a way to get it working again.
Thanks!
NO its not bricked, it wouldnt power on. Sounds like its messed up good though, good luck
Well, I found that I *could* get it to load the OS if I used MTTY and the 'set 0 16', 'boot' trick.
I then upgraded the bootloader to above 2.4. However... it still hangs at the bootloader screen if I reset the device.
So... It seems something else is going on, that is preventing the device from loading the OS on it's own. I can't really be plugging it into a computer and running MTTY every time I need to reset the damn thing.
Any ideas?
mantispid said:
Well, I found that I *could* get it to load the OS if I used MTTY and the 'set 0 16', 'boot' trick.
I then upgraded the bootloader to above 2.4. However... it still hangs at the bootloader screen if I reset the device.
So... It seems something else is going on, that is preventing the device from loading the OS on it's own. I can't really be plugging it into a computer and running MTTY every time I need to reset the damn thing.
Any ideas?
Click to expand...
Click to collapse
Have you tried to flash since you upgraded the BL....if not give it a shot and see what happens....use the SD method to flash....put NBH file on card and rename it to TITAIMG.nbh
Yup, just tried flashing from microSD, and it flashed just fine, but has the same problem.
It won't exit the bootloader. I wish I had a USB headset adapter to see if that would make it boot. I've heard that works for some of these that have this problem.
Hi,
I have a problem with my HTC HD2, thing is that the phone it's not booting correctly, all i got when i power on the device, it's an emty white screen... without the green HTC letters.
I got installed a cooked ROM, BsB Beast 6.1, with radio 2.12.50.02_2, and i was running Android from SD when all this **** started, two weeks ago. The phone battery ran out while i was on Android, a couple of hours later... i got home and plugged the phone for charging. When i pressed the power button, the phone boots with that blank screen.
I can get into the bootloader, and it's showing this info (whitout the underscores):
PB81100 HX-BC
SPL-1.42.HSPL XE
_____________0x05
_____________0x30
CotullaHSPL
I've tried many different things and none seems to do anything at all:
- First of all, i did a hard reset. The process ends OK but the phone stays doing the same
- Then, i tried to flash again the same ROM i was using. I was unable to do that by using CustomRUU and PC connection. The phone it's detected by the PC, and the bootloader screen shows that it's conneted by "USB". Then, i executed the CustomRUU app, following all the steps and, when the phone should start flashing the progress bar doesn't get past 0%, both the phone display and PC. After a few minutes, CustomRUU gives an error saying "timeout" connection. I've tried to do this from different USB ports and different PCs with the same result.
- After those fails, i tried to flash again the cooked rom from SDCARD. The process ends OK, saying "Update Complete". Then, i rebooted the phone but the blank screen remains the same way. That cooked ROM doesn't have radio.
- After that, i decided to flash a stock ROM. First, i tried to make a "Task 29" to the phone, but i got the same problem than with the cooked ROM. The progress bar doesn't get past 0%. With the stock ROM the problem was the same again. Then, i tried to flash the stock ROM from SDCARD. The process stops at X% saying 0018003 RADIO - FAIL. I've got this error each time i try to flash a ROM with radio or a radio itself.
- I was able to do a "task 29" by using MTTY, but nothing changes when i try to flash any ROM after that.
- i've tried to upgrade my HSPL, by using both HSPL2 and HSPL3. Both programs detects my version of HSPL, then the process starts and ends saying "Succesfully done" but nothing changes in my bootloader, it's still saying that i got 1.42.HSPL
Since i can get to the bootloader, i hope to have any chance to get this device back to life.
I've readed some posts here and within other forums, i've tried with many different cooked or stock ROMS but nothing works
I hope to find help here, thanks in advance and, sorry if my speaking it's not 100% correct
yet another "i was running android and...........now my phone won't boot".. thread. makes me glad i don't bother with android...tried it once and had to hard reset, never touched it since, heh.
for the sticking at 0%,and timeouts etc, try and always enter bootloader yourself, then wait for serial to become usb, and then run customruu. this way you can also visually confirm hspl is there(or not there, depending what you are doing) and it should cure certainly the timeouts.
if i were you, i'd concentrate on getting back to stock, and start over.(only skimmed your post, i'm mobile, so sorry if i say something you already did.)
get into bootloader, get rid of hspl if it s there,(run hspl2 and choose 1.66.0000) then back into bootloader(you should soon get used to holding vol down as each stage completes to reenter bootloader) then try flash your CORRECT stock rom via usb. if that fails try it using the sd card method.
Thanks for answering, samsamuel.
I haven't looked into the Android section for threads with the same problem i got, maybe i should have started that way
Each time I enter the bootloader, i'm doing as you've said (believe me... in these days i've become a "master" on pushing power button with vol. down )
I always wait for the bootloader to finish loading, then i plug the phone to my PC, wait again for "Serial" turns into "USB" and, then, start the flashing process.
I'll try to do what you said with HSPL2, to select 1.66.000. Each time i've tried with different HSPLs, i've selected 1.66.HSPL or 2.08.HSPL... so, i guess i should try with that.
I'll be updating this thread as soon as i got news.
/me edit
I must to say, that Android was running "fine" (some minor problems when trying to wake up the phone, but nothing critical apart from this disaster). By the record, i didn't have installed dual boot... the phone always boots into WinMo
Hi again,
I have tried to update my SPL to 1.66.000 without success, despite what HSPL2 says ("Succesfully done")
Any thought about this? I can't understand why those programs are saying "OK" but are doing nothing
thanks in advance
not seen it first hand but have read several threads where the update seems to work but nothing changes. not really sure as to cause or cure, sorry.
I wonder if is there a way to make HSPL2 / HSPL3 to leave traces or any log of what they are doing... in order to see why my phone is ignoring them
Little bump, looking for more help
Is this the right subforum to post this things?
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset
I think I may have bricked my OG HD2 (T8585) while trying to undo everything I had done to it, which was HSPL, MAGLDR and a NAND Android ROM.
It all started when I first tried to flash Kingdom's Sense 3.0 Gingerbread ROM. It told me to create a 340MB partition using HD2 Toolkit which I did. I then flashed the ROM as per the instructions, but it kept getting stuck on the boot logo so I decided to go back all the way to stock WinMo.
I downloaded a stock 1.66 ROM from HTC's website, tried to flash it via USB which failed because I obviously have no ActiveSync in Android. So I loaded the image onto my SD card and tried to flash by holding Vol Down and Power.
That was the first sign of trouble, about 1/10th during upgrade process it gave me some errors and rebooted to a black screen with a silver warning triangle.
Trying to go back into bootloader, I got the message about "upgrade ROM code error."
Since it had reverted back to SPL 1.42 I tried to reflash HSPL2 through USB, which worked fine, got the "We bricked it " message and everything. But then I tried to install MAGLDR and nothing, it fails even though it recognizes the USB connection.
So what can I do? On the one hand my device can accept and load HSPL2 and my computer is recogonizing the USB connection, but other than that nothing, it won't even turn on without being connected to external or USB power.
I also tried installing stock 1.43 ROM and that goes fine, it gives me an okay on everything but it gets stuck in the white HTC bootscreen in a loop.
I know I probably made a huge glaring mistaking to cause this, it's probably because I've bought a Transformer tablet and a Galaxy S2 in the last month so the steps regarding the HD2 were probably a bit of a blur. I guess the stock ROM probably included a radio that I wasn't supposed to flash, causing my device to be bricked.
But is there anyway I can get some type of OS working on this poor HD2 now?
She lives!!!
Okay, I'm not actually sure if the problem is solved but I'm back in WinMo 6.5 for the time being.
Since it had been off for a few hours I tried my luck again, plugged it into the wall and saw that it was stuck in the boot loop again. But I got distracted and left it, and when I came back it was on the orange WinMo setup screen.
Not sure what happened to make it go from not even getting power from the battery to working normally. But I see now my radio version is 2.05 which is massively old, I'm going to try and upgrade that first and see... hopefully it won't go back to being dead the moment I power down.
Shawn_230 said:
I think I may have bricked my OG HD2 (T8585) while trying to undo everything I had done to it, which was HSPL, MAGLDR and a NAND Android ROM.
It all started when I first tried to flash Kingdom's Sense 3.0 Gingerbread ROM. It told me to create a 340MB partition using HD2 Toolkit which I did. I then flashed the ROM as per the instructions, but it kept getting stuck on the boot logo so I decided to go back all the way to stock WinMo.
I downloaded a stock 1.66 ROM from HTC's website, tried to flash it via USB which failed because I obviously have no ActiveSync in Android. So I loaded the image onto my SD card and tried to flash by holding Vol Down and Power.
That was the first sign of trouble, about 1/10th during upgrade process it gave me some errors and rebooted to a black screen with a silver warning triangle.
Trying to go back into bootloader, I got the message about "upgrade ROM code error."
Since it had reverted back to SPL 1.42 I tried to reflash HSPL2 through USB, which worked fine, got the "We bricked it " message and everything. But then I tried to install MAGLDR and nothing, it fails even though it recognizes the USB connection.
So what can I do? On the one hand my device can accept and load HSPL2 and my computer is recogonizing the USB connection, but other than that nothing, it won't even turn on without being connected to external or USB power.
I also tried installing stock 1.43 ROM and that goes fine, it gives me an okay on everything but it gets stuck in the white HTC bootscreen in a loop.
I know I probably made a huge glaring mistaking to cause this, it's probably because I've bought a Transformer tablet and a Galaxy S2 in the last month so the steps regarding the HD2 were probably a bit of a blur. I guess the stock ROM probably included a radio that I wasn't supposed to flash, causing my device to be bricked.
But is there anyway I can get some type of OS working on this poor HD2 now?
Click to expand...
Click to collapse
I had pretty much the same problem as you, but mine is the tmobile us version. I tried flashing back winmo from android via sdcard method but i got an upgrade error. I tried flashing with microSD card sizes 8gb, 16,gb, and then 2gb which was recommended, but still no luck. I managed to connect the hd2 through usb on the tricolor screen and flashed back to hspl2.08 and magldr and cwm were still on. But i would like to still get back to winmo stock as if it came from tmobile.
My question is if i download the latest update from tmobile which is T-Mobile HD2 MR Software (Version 3.14.531.1), what is the correct spl i should have installed on the hd2 so that htc and tmobile wont know that i messed with the spl? is it 3.03? I was going to connect via USB on the tri color screen again, run the EXE and manually install the SPL? I just need to know which SPL to install after i run the latest winmo update. Please advise on the SPL and the method i'm going to take on reverting back to winmo. Thanks.
germotlp said:
I had pretty much the same problem as you, but mine is the tmobile us version. I tried flashing back winmo from android via sdcard method but i got an upgrade error. I tried flashing with microSD card sizes 8gb, 16,gb, and then 2gb which was recommended, but still no luck. I managed to connect the hd2 through usb on the tricolor screen and flashed back to hspl2.08 and magldr and cwm were still on. But i would like to still get back to winmo stock as if it came from tmobile.
My question is if i download the latest update from tmobile which is T-Mobile HD2 MR Software (Version 3.14.531.1), what is the correct spl i should have installed on the hd2 so that htc and tmobile wont know that i messed with the spl? is it 3.03? I was going to connect via USB on the tri color screen again, run the EXE and manually install the SPL? I just need to know which SPL to install after i run the latest winmo update. Please advise on the SPL and the method i'm going to take on reverting back to winmo. Thanks.
Click to expand...
Click to collapse
So it sounds like you lucked out, huh? So your HD2 works at least? I believe if you succesfully flash an official ROM like from T-Mobile, it will replace everything including the SPL back to stock - this is what I was trying to do by flashing official 1.43, to go back to factory mode.
I seem to be worse off than you though. I posted last night how my HD2 was back up running WinMo, but as suspected the moment I rebooted it was back stuck in the boot loop.
Any ideas? I wish I could get the HD2 working again so I could set it aside and get to playing with my new Galaxy S2.
This is driving me crazy now...
I managed to flash HSPL 2.08, and then MAGLDR 1.3, and then CWM recovery on top.
But this still seems bricked to me, still needs external power to turn on and I can't actually flash a working ROM... flashing a ROM via USB gives connection error and flashing via SD card goes fine but gets stuck in a boot loop.
What can I do at this point short of tossing the phone? I've tried stock 1.48, stock 1.66, a bunch of radios from 2.05 to 2.15... everything.
I am doing some research but the only results I find are T-Mo HD2s being bricked by the wrong radio. I have an original HD2 and I never flashed a radio intended for another HD2 model, so how is my phone so bricked all of a sudden?
All the threads I've found say if you can get into the bootloader then there's some hope but I doubt it because I can't successfully flash anything with it. I don't even know how I managed to get back into WinMo briefly last night... think my HD2 is probably just toast.
Okay, I finally solved my problems for sure - bent charging leads in the battery compartment!
Anyone having boot issues, take out your battery and look at the metal leads and you will probably find them bent out of shape. They are incredibly flexible, so just make them straight again and it will work. I assume it cuts external power briefly right before booting into WinMo, which is why it was rebooting constantly.
So I suppose for me this was a huge case of confusion, I got all confused with bootloaders and MAGLDRs when the problem wasn't even software related.
Shawn_230 said:
So it sounds like you lucked out, huh? So your HD2 works at least? I believe if you succesfully flash an official ROM like from T-Mobile, it will replace everything including the SPL back to stock - this is what I was trying to do by flashing official 1.43, to go back to factory mode.
I seem to be worse off than you though. I posted last night how my HD2 was back up running WinMo, but as suspected the moment I rebooted it was back stuck in the boot loop.
Any ideas? I wish I could get the HD2 working again so I could set it aside and get to playing with my new Galaxy S2.
Click to expand...
Click to collapse
The problem with my hd2 is the CPU is overheating thus causing it to freeze or lock up, and gets it annoying. After hours of searching on XDA, that's what seems to be the problem. I can't even talk on the phone for more than ten minutes or else locks up. So my idea was to get it back to winmo stock and see if it still locks up. If it does then i will probably try to send it back to HTC and see if they send another one maybe or fix it.
Ive had no luck luck flashing back to winmo from sdcard so i think i should try flashing back to winmo via usb on the tri color screen. Ive read on XDA that if you flash winmo via usb that it doesn't replace your SPL, and you have to run HSPL4 and flash it manually. I'm just not sure which SPL i should flash. I'm assuming 3.03 maybe?
What you could try is using an sdcard that is 2gb or less. Ive read that anything higher than 2gb will cause issues. I'm still a noobie at this rooting biz. Hope that helps.
germotlp said:
The problem with my hd2 is the CPU is overheating thus causing it to freeze or lock up, and gets it annoying. After hours of searching on XDA, that's what seems to be the problem. I can't even talk on the phone for more than ten minutes or else locks up. So my idea was to get it back to winmo stock and see if it still locks up. If it does then i will probably try to send it back to HTC and see if they send another one maybe or fix it.
Ive had no luck luck flashing back to winmo from sdcard so i think i should try flashing back to winmo via usb on the tri color screen. Ive read on XDA that if you flash winmo via usb that it doesn't replace your SPL, and you have to run HSPL4 and flash it manually. I'm just not sure which SPL i should flash. I'm assuming 3.03 maybe?
What you could try is using an sdcard that is 2gb or less. Ive read that anything higher than 2gb will cause issues. I'm still a noobie at this rooting biz. Hope that helps.
Click to expand...
Click to collapse
Which model HD2 do you have?
Find and download the stock ROM from this thread, get 1.66 since it will work with HSPL2 which is the latest HSPL that will work with MAGLDR (for Android and WinPhone7).
You can flash that through SD card and it will go back to total stock, including stock SPL. I assume you know how to pull the .nbh file from the ROM you download, so just rename to LEOIMG.nbh and put it on your SD card.
Go into the tri-color screen and it should flash fine and give you factory reset. This is where it wasn't working for me, but not because I had flashed the wrong ROM or something but because I had messed up the charging leads in the back while popping the battery in and out to reboot as I was flashing.
Man I downloaded 1.66 last nite and tried to flash back to winmo from android and its toast. Not sure what went wrong. Oh well.
Sent from my HTC Sensation 4G using XDA App