I know theres a thread on the Touch pro 2 Car mount but i dont know if any of those mounts work for the Tilt 2. I'm looking for something that fits nice and clips to the vent sturdy and also can rotate to landscape. I searched and searched and googled and cant find anything remotely good.
I bought a universal one but it was garbage
I know Proclip / brodit makes great car mounts but i cant justify paying 70 bucks for a car mount. ( 35 for the mount and 30 for the car mount part )
Sorry for making a new thread for this but i see a ton for the Touch pro 2 and still dont know if those will work with the tilt 2. Thanks for the help in advance
http://cgi.ebay.com/ws/eBayISAPI.dl...964413&ssPageName=STRK:MEWAX:IT#ht_4013wt_939
Anyone know if this will work with the Tilt 2?
dash mount
Best one I've found.... I hate Best Buy but they were the only ones in town with a decent mount. It was 24.99, a little more than I wanted to spend, but well worth it.
http://www.bestbuy.com/site/Xentris...lack/9072399.p?skuId=9072399&id=1218022585746
Nate
They should make a Better one
with charging dock like other Phones have
ilordvader said:
They should make a Better one
with charging dock like other Phones have
Click to expand...
Click to collapse
These days it seems like you're pulling teeth in terms of getting accessory developers to develop accessories for any non-iPod/iPhone devices...
This is the Bets one I found till now - HERE
most adjustable
I just ordered this one for a Tilt2. For $13 delivered it doesn't look to bad. I don't believe the TP2 exact fit ones will work with a Tilt2. I would be nice if one came out soon.
Looks like my usual vendor, ProClip USA is developing one, but it is not ready yet. Check them out at:
http://www.proclipusa.com/
I've looked at the ProClip. It looks pretty good. The problem is I just can't see spending close to $80 for one. I upgrade phones every 12-16 months Hell, I only spent $99 delivered for my Tilt2...
anit77 said:
I've looked at the ProClip. It looks pretty good. The problem is I just can't see spending close to $80 for one. I upgrade phones every 12-16 months Hell, I only spent $99 delivered for my Tilt2...
Click to expand...
Click to collapse
how did you do that?
anyway, did anybody try this:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
marcini said:
how did you do that?
anyway, did anybody try this:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
Click to expand...
Click to collapse
I did it here.
Again I'm weary of TP2 exact fit holders. That one is labeled for T7373, the Tilt2 is T7377. There is a small size difference. It does look decent though.
I drive a GMC Sierra and have been looking for a dash or vent mount. A windshield mount puts the phone out of arms reach.
krystos said:
Looks like my usual vendor, ProClip USA is developing one, but it is not ready yet. Check them out at:
http://www.proclipusa.com/
Click to expand...
Click to collapse
Actually this one is available. I've already got one in my truck for my Tilt 2.
be VERY careful with vent mounts. Your AC can make your phone cold causing it to condensate when you exit the vehicle and walk around outside ESP in high humidity areas thus voiding your warranty
proclip
i bought the proclip car kit for the tilt. now i have the tilt2.
the car mount fits great, good location. i agree it is expensive, but replacing the phone holder for the tilt2 is half the cost. still great fit and location.
moonwulf said:
i bought the proclip car kit for the tilt. now i have the tilt2.
the car mount fits great, good location. i agree it is expensive, but replacing the phone holder for the tilt2 is half the cost. still great fit and location.
Click to expand...
Click to collapse
Does the holder you're referencing allow you to rotate the tilt 2 from portrait to landscape?
DarienA said:
Does the holder you're referencing allow you to rotate the tilt 2 from portrait to landscape?
Click to expand...
Click to collapse
I have the same holder, and yes it does. It also allows you to open the keyboard.
igrip
i have the igrip custom mount for my fuze, i like it a lot, and the mount detaches from the goose neck. they make several mount options that can connect to the custom clip. the have one for my mountain bike, so i can attach it on the trails and use some of the gps features with a program i downloaded here on xda. They also have some more solid mounts that dont move around as much as the goose neck. I am getting a tilt 2 real soon, as soon as my contract is up for upgrade... (next week).. would love to find a custom clip for it that works with the igrip mounting options, has anyone seen one. i dont see a custom clip for the tilt 2 on their website.
igrip
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
actually, just saw this one it looks like the same bracket as the igrip. that I have.
this is the one i have for my fuze
http://www.fuzedepot.com/igrip-custom-flexible-mount/3A78A5370.htm
kmartin888 said:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
actually, just saw this one it looks like the same bracket as the igrip. that I have.
this is the one i have for my fuze
http://www.fuzedepot.com/igrip-custom-flexible-mount/3A78A5370.htm
Click to expand...
Click to collapse
Yeah i had a iGrip for the Fuze as well and i loved it. I am wondering if they say TP2 if they work with the Tilt 2. Im not sure if the specs are exactly the same or i would be buying this one here for sure
Take a look. Anyone know if this works with the tilt 2? I think i posted this earlier too and no one answered
http://cgi.ebay.com/ws/eBayISAPI.dl...964413&ssPageName=STRK:MEWAX:IT#ht_4110wt_939
The one
I think that this one will do it for ya
http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspxhttp://images.google.com/imgres?img...M+Custom&hl=en&safe=off&sa=G&um=1&newwindow=1
Related
I discovered a company called Krusell, which is a fine leather manufacturer out of Sweden. They have a line of accessories called Multidapt, which essentially allows you to use the leather case on your phone and mount it to a number of different things, including belt, backpack strap, and, best of all, car windshield (or car dashboard). I was trying to figure out what would be best for mounting options in my car, but I didn't want something permanent, as my car is only a temp. The accessory to mount to your windshield is called the Krusell Windshield Holder, and is about $15 shipped. You need to also purchase the Mogul leather case or the Multidapt accessory to hook the two of them up.
I'll take some pics if you guys wanna see!
Pics would be great thanks! anyway to hide the charging cable with this setup?
Yes, please post pics
Here's a link. http://www.sfplanet.com/product/50132/Krusell_Windshield_Holder__Mount_50132.html
Good price at $11.95 also.
I use a PDAir aluminium case ($28) and its associated car mount ($12):
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000144&products_id=6144
With two separate orders made around the holidays it took ~2.5 weeks for the items to arrive to BC.
Back to a Palm V in a Rhinoskin, I've always kept my PDAs in metal cases.
Can you post up some pics of your mogul in its leather case attached the windshield mount
I just use a generic car mount and it works fine... the only thing that worries me is that the back of the phone gets kind of hot... something with some ventilation would be awesome.
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=881
i saw this in another post, i do not have it nor have used it but it looks nice? someone buy me one and i'll test it for you
coffey_joshua said:
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=881
i saw this in another post, i do not have it nor have used it but it looks nice? someone buy me one and i'll test it for you
Click to expand...
Click to collapse
I was totally thinking of buying this mount! Does anyone have it? I am wondering if it has a permanent mounting option. I have a Pro.Fit mounting bracket in my car and would love for it to be able to attach to that!
Doesn't seem like this really belongs in the upgrade forum.
I have this mount and love it. The landscape swiveling is awesome to use your keyboard for keyboard shortcuts(never for txting or emailing while driving obviously, grin). Sound quality is great from the audio out into my aux in on my car. I use it for mp3's, gps etc and it works great. I posted some pics of my install in another thread here: http://forum.xda-developers.com/showthread.php?t=367137
Have you guy use this one ? http://cgi.ebay.com/NEW-Car-Mount-H...ryZ35158QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
AstronusX said:
Have you guy use this one ? http://cgi.ebay.com/NEW-Car-Mount-H...ryZ35158QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
that is the craziest modded mogul i have ever seen! how the heck did he, er, wait..... never mind
AstronusX said:
Have you guy use this one ? http://cgi.ebay.com/NEW-Car-Mount-H...ryZ35158QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
That's pretty much identical to what I use.
It works fine, but it's got 2 downsides....
1. The back of the phone gets hot in it.. I'm sure that's not a really good thing.
2. The back of the mount blocks the speaker, so voice directions are muffled. If your car stereo has an auxilary input, problem solved... my car doesn't.
Hi all.
I'm looking for a car holder for my TP2. Can anyone make a recommendation? I'm UK based and I'd rather not pay silly amounts on delivery other than that I'm open to all suggestions?
So far I've seen and like the Boxwave car holder. Only problem is they're a US company and they charge quite a bit for non-US delivery.
Thanks in advance
I have this one http://www.amazon.co.uk/Brodit-car-...?ie=UTF8&s=electronics&qid=1254855076&sr=8-24
I combined it with my Richter holder (this one http://www.amazon.co.uk/HERBERT-RIC...3?ie=UTF8&s=electronics&qid=1254855152&sr=8-3 ) because I had a HTC Touch Pro before.
I have the CM929-S: Swivel Vent PDA Car Mount from Arkon that I got from eBay a while back for around $10. It works pretty well with the TP2, and I like it better than suction-cup mounts because it won't fall off. Although, I do like the idea of a unit-specific mount if I could find one.
http://www.buybits.com/product/sku_ark-swivel-pda-vent.aspx £9.99
neonoxDE said:
I have this one http://www.amazon.co.uk/Brodit-car-...?ie=UTF8&s=electronics&qid=1254855076&sr=8-24
I combined it with my Richter holder (this one http://www.amazon.co.uk/HERBERT-RIC...3?ie=UTF8&s=electronics&qid=1254855152&sr=8-3 ) because I had a HTC Touch Pro before.
Click to expand...
Click to collapse
Thanks neonoxDE!
the Richter holder looks perfect!
Wait Spartan: The richter holder I posted is for TOUCH PRO 1 not Touch Pro 2! You can use the Richter "arm" (don't know the right word) and add the brodit holder.
if you are going to go Arkon, may as well go with the powered mount
http://www.arkon.com/poweredpdamount.php?selFeat=usb_mini
the speaker is fairly useless... the TP2 speaker is louder
does have 2 USB charge port though, 1 at 1.2a (fast charge!) and another at 600ma
a little thicker than the none power version but worth it
so you can charge 1 phone and another device... or a friends phone too
I combine it with a proclip vechile mount and its perfect!
I just got the box wave kit. The quality is good and you can fit the TP2 in landscape with keyboard out and portrait.
They dont give you a dash disk to mount on your dash but suction cup is huge should mount on any window. They also give you a HVAC vent hook as well.
I'd give it a 7/10.
Try This
http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Looks decent though passive only.
neonoxDE said:
Wait Spartan: The richter holder I posted is for TOUCH PRO 1 not Touch Pro 2! You can use the Richter "arm" (don't know the right word) and add the brodit holder.
Click to expand...
Click to collapse
Thanks neonoxDE but there's also a TP2 version
dezoris said:
I just got the box wave kit. The quality is good and you can fit the TP2 in landscape with keyboard out and portrait.
They dont give you a dash disk to mount on your dash but suction cup is huge should mount on any window. They also give you a HVAC vent hook as well.
I'd give it a 7/10.
Click to expand...
Click to collapse
Thx for the tip
SpartanGrey said:
Thx for the tip
Click to expand...
Click to collapse
I also have the Boxwave kit. Good quality. I have it attached to the vent. It was a pain getting it hooked up but once it was on it was great.
TP2 now functions as an easily accessible hands-free phone, mp3 player, and gps system. Man, I love this thing
I ordered this one
http://www.gpsforless.co.uk/product_details.php?id=16170
There were two on the site, and this one LOOKED less sturdy which was my only concern. Having said that, it turned up today and whilst I have not put it in the car yet, I am well pleased.
Much sturdier in reali life than the pictures suggest. Good selectioon of attachments etc. Way better than the ebay one I had for my Touch pro.
I was just about to ask the same question. Don't you just wish there was a genuine HTC one like the sexy HD2 mount...
s0leFUNK said:
I also have the Boxwave kit. Good quality. I have it attached to the vent. It was a pain getting it hooked up but once it was on it was great.
TP2 now functions as an easily accessible hands-free phone, mp3 player, and gps system. Man, I love this thing
Click to expand...
Click to collapse
Thanks I would be more than happy to buy the Boxwave goods but the shipping is too high. I'm UK based - it almost doubles the purchase costs
crazyC said:
I ordered this one
http://www.gpsforless.co.uk/product_details.php?id=16170
There were two on the site, and this one LOOKED less sturdy which was my only concern. Having said that, it turned up today and whilst I have not put it in the car yet, I am well pleased.
Much sturdier in reali life than the pictures suggest. Good selectioon of attachments etc. Way better than the ebay one I had for my Touch pro.
Click to expand...
Click to collapse
This looks more promising! Thanks!!
pjsmith said:
I was just about to ask the same question. Don't you just wish there was a genuine HTC one like the sexy HD2 mount...
Click to expand...
Click to collapse
To be honest I've been very disappointed with the lack of (widely) available accessories for the TP2....
velcro
spartangrey said:
hi all.
I'm looking for a car holder for my tp2. Can anyone make a recommendation? I'm uk based and i'd rather not pay silly amounts on delivery other than that i'm open to all suggestions?
So far i've seen and like the boxwave car holder. Only problem is they're a us company and they charge quite a bit for non-us delivery.
Thanks in advance
Click to expand...
Click to collapse
i use velcro , it's cheap and works fine
I just ordered this cheap nasty thing from ebay:
http://cgi.ebay.com/ws/eBayISAPI.dl...Category=20336&_trkparms=algo=LVI&its=I&otn=2
If it's rubbish, I'll throw it away... you can't really argue for $10!
p_shep said:
I just ordered this cheap nasty thing from ebay:
http://cgi.ebay.com/ws/eBayISAPI.dl...Category=20336&_trkparms=algo=LVI&its=I&otn=2
If it's rubbish, I'll throw it away... you can't really argue for $10!
Click to expand...
Click to collapse
Any report on this yet?
I buyed this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180422993926&ssPageName=STRK:MEWNX:IT
As shipped form Hong Kong it will take more than a month to arrive
Report later...
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
For those of you waiting for the ProClip car holder for your TP2 or Tilt2, they are now available.
ProClip
No, I'm not affiliated with this company in anyway, I just love these holders, and have been waiting impatiently.
I like that it allows it to slide open while being held, but it also doesn't hold it with a case on, so it's a non-starter for me.
I like to go with a car-specific mount from Panavise & a holder from Arkon.
I've got the pro-clip holder on order. I've had one for my Tilt and Fuze, and they are solid.
The device specific holder actually mounts onto a car specific mount. In my case, it attaches next to the shifter in my S2000. And yes it does suck that you can't use a case. But I prefer film type protectors like InvisibleShield to keep the bulkiness of the device to a minimum.
SacTilt said:
, I just love these holders, and have been waiting impatiently.
Click to expand...
Click to collapse
Am i missing something here, thats a brodit mount? and has been available for months?
www.brodit.com
fil said:
Am i missing something here, thats a brodit mount? and has been available for months?
www.brodit.com
Click to expand...
Click to collapse
They actually come branded with both names on them (ProClip and Brodit). If it's been available for months, then that's news to me. I've always purchased through ProClip, and they just became available on their site.
fil said:
Am i missing something here, thats a brodit mount? and has been available for months?
www.brodit.com
Click to expand...
Click to collapse
They've been available for GSM TP2's for a while not CDMA, at least not if you wanted the powered one. Its Brodit over on your side of the pond but its called Proclipusa over here. You guys got it first because the phone came out for you earlier.
The only one available for the CDMA version on their site is the non powered version which is the same exact clip as used for the GSM version. I'm beginning to wander if they are even going to make a powered version. There are good non powered clips made for this phone that are a third the price. $35 bucks for what they are offering is quite frankly a ripoff.
I am excited to see the ProClip finally appearing, but I'm hesitant to buy. I know there have been smatterings of this discussed elsewhere, but my main concern is sliding a holder into a groove that doesn't quite exist.
There is no gap between my phone and my keyboard. Forcefully wedging a piece of plastic in there will clearly create one, but that doesn't make it a good idea.
Those of you that have been using these for years don't seem to have any issues with this, but I need some assurances that this won't compromise the slider component over time.
Since I personally have no reason to slide the keyboard out while mounted in my vehicle, I would strongly prefer a holder exactly like this, but one the entire phone slides into, not just the keyboard part. Does that exist? (And no, not a bulky universal one.) Already have that and thumbs down...
Any thoughts would be appreciated.
glw35 said:
There is no gap between my phone and my keyboard. Forcefully wedging a piece of plastic in there will clearly create one, but that doesn't make it a good idea.
Those of you that have been using these for years don't seem to have any issues with this, but I need some assurances that this won't compromise the slider component over time.
Any thoughts would be appreciated.
Click to expand...
Click to collapse
I have the one for my original Tilt. The phone is in and out of the mount 30+ time a day. The mount lasted for about 2 months before the beginnings of failure.
One of the thin pieces of plastic on the mount, that slide into the gap between the two halves of the phone started to break off.
It took another month or so before the piece had completely gone. This allowed the phone to fall out rendering the mount useless.
I was able to put a piece of fuzzy Velcro on the mount to wedge the phone securely into place.
Two years later I I still have it. Now its time to order the one for the TP2
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Same
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
I've been looking for the same thing, swivel capabilities is a must. Anyone find a good one?
Get a decent quality universal car mount (with the four prongs) and then just buy a cheap fixation for your Lumia. That way you can keep the mount when you eventually change phones... That's what I've been doing for the last few years...
I've got a telescopic Herbert Richter car mount which looks like it's the same as this one (http://www.ebay.com/itm/iGrip-Herbe...472900?pt=PDA_Accessories&hash=item48454f5744) and I've been very pleased with it. Unlike some of the cheaper ones I've had it has never lost suction and come unstuck. Most eBay sellers who have cheap Lumia 920 car mounts will sell the phone-specific part of their mounts separately for a couple of euros...
Well .. i dont like the universal ones to be honest because the ones i used never where as usfull as expected. will have a loook at the richter one.
Which car charger can you recommend. I am reading a few amazon.co.uk reviews and they are not to pleased with the ones offered
The one I use (and the one that looks like mine that I posted a link for) isn't one of those universal ones that can be adjusted to hold any size of phone... I don't like those ones either... The ones Im talking about just use a four prong system where you can attach phone specific "faceplates" like you can see here http://forum.xda-developers.com/showthread.php?t=683631 so it looks like it's made for the phone you use it with... Sorry, it's not easy to explain but you should be able to get an idea of what I'm talking about.
does your one come with a car charger already?
got different from belkin etc .. just looking for the power part of a car mount now.
will see if i find a universal holder later
hrmm, not sure if we are allowed to post links on here...
anyways, i bought this one http://www.amazon.co.uk/gp/product/B00AEO3U7W/ref=oh_details_o00_s00_i00
took a gamble as there was no reviews, current review is from myself.
Its pretty solid, I tend to always buy ones for the phone as I'm not a big fan of the all in one mounts, and the nokia one i got for my partners 710 is terrible, won't even hold my phone just slips out constantly. I've got a car charger from maplin to go with it that does do a 1000ma charge as my old charger didn't charge the phone enough to keep up with navigon.
Its as solid as some premium brand mounts i've bought in the past, as good as you can get with one suction cup. (imo) how long it lasts is another thing, but for the price I thought it was pretty neat, a friend borrowed it and immediatly ordered one too.
Its very sturdy and the easist phone mount i've used to slip in and out, only thing that did initially put me off is the fit isn't 100% secure, theres very slight movement, i don't think its even 1mm, thought it would rattle but seems fine in the car.
well i just ordered this for my charging:
http://www.amazon.co.uk/gp/product/B002C3AFHG/ref=oh_details_o00_s00_i00
hope you didnt have this one
and i will have a closer look at the amazon offer, thanks
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
NeoGreendawg said:
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
Click to expand...
Click to collapse
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
stead said:
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
Click to expand...
Click to collapse
I've very rarely seen them advertised on their own but if you ask, most eBay sellers who sell the dirt cheap car holders will sell you the phone specific attachment on it's own in my experience and usually for only a couple of euros including postage. Postage must be cheaper in Hong Kong than it is in France... :laugh:
Arkon Slim-Grip Floor Mount SM525-S
FWIW I have been using this model for about 4 years- first with my Tilt2 and now with the Lumia 920 (both without a case and with an Otterbox Defender case as the holder can expand). I had an older version for the Tilt2 which didn't allow for 180deg movement (you couldn't move the phone to landscape position while inside the holder) so when I got the 920 I was able to purchase just the Slim-Grip portion and keep the flexible pedestal part that I already had.
The 4 legs on the Slim-Grip are not permanent- they come in a little bag and you slide them into the body of the phone holder. The move left and right to allow for access to ports on the phone that may not be centered on the phone itself. It also comes with extra legs that are a different shape in case you need a different fitment for your phone (think they are shorter?). The bottom of the Slim-Grip is the part that moves- you push it down with the bottom of your phone and it expands enough to let you then push the top of the phone into the holder so the top legs support it. It isn't obvious from the pictures on Arkon's site at first but you will see a line running across the holder when you look at the pictures and that is where the movement occurs.
I am able to put my phone in the holder with one hand and, because the pedestal part is mounted to one of the passenger seat floor bolts, it's very stable. It's hard to move the pedestal to bend it to different shapes, which is a good thing, because it won't flop all over the place when driving. I can use the 920 without a case in it and with an Otterbox Defender, either way is fine. It allows easy access to the audio and power ports. My friends stick their phones in it too and it holds them just as well (iPhones, Galaxy S3's, Blackberry's etc......).The mount does not impede passenger comfort, however they may not be able to just flop their left leg against the center console because the mount would then be rubbing against the plastic and may leave marks, at least in my Subaru Legacy.
I have used this mount without any problems for close to 5 years now and everyone is jealous of it because it is so secure and convenient. I have no problems recommending it 100%. Good luck.
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Dave-Kay said:
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Click to expand...
Click to collapse
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
BigKuri said:
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
Click to expand...
Click to collapse
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Griffinx said:
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Click to expand...
Click to collapse
They swivel 360 degrees and are very high quality. I've got one in my car that I've also used for my Note II (different holder of course though). It was well worth it IMO.
brodit always had the best ones..
but i read something with "screws" and that made me buy something different for the glas
What did you hear, I'm curious.
Sent from my 920
oh i just found car mounts to be screwed in the cockpit
-adrian- said:
oh i just found car mounts to be screwed in the cockpit
Click to expand...
Click to collapse
Oh OK I understand what you're saying now; I thought you were referring to an issue like the screws scratching the phone or something like that.
I didn't have to screw anything into my dash. I had a mount that clips onto the dash and a holder which is screwed into said mount. Very easy.