Is it possible to change the Auto Lock Time ?
Because is little to fast for me ...
Thanks
Did you install some autolock app？ In the original rom 6.1 or 6.5 there's no auto lock service. Or you mean the auto turn off backlight?
laufine said:
Did you install some autolock app？ In the original rom 6.1 or 6.5 there's no auto lock service. Or you mean the auto turn off backlight?
Click to expand...
Click to collapse
I have installed the EnergyROM 6.5 Akeo and there are only the possibility to activate or deactivate the AutoLock but I haven't found the possibility to change the time before the autolock start and is that new reliese is to fast
Maye this is an answer.
Did you try looking in the Settings --> Lock?
There is a time setting there, and if you are looking for the screen time out, that is in ...
Settings --> System --> Power
under the Advanced Tab.
You mean the Lock with a Password and a PIN (and you MUST insetr a Passw or a PIN to activate that function) but i only need the AutoLock of the device.
Now is only 30sec. and is very very very short time !
siroftherings said:
You mean the Lock with a Password and a PIN (and you MUST insetr a Passw or a PIN to activate that function) but i only need the AutoLock of the device.
Now is only 30sec. and is very very very short time !
Click to expand...
Click to collapse
then change the power settings to turn the backlight off after 1 min instead of 30 sec
peeps said:
then change the power settings to turn the backlight off after 1 min instead of 30 sec
Click to expand...
Click to collapse
that won't change the display timeout of the lock screen. Basically, if you lock the device, once locked the device will dim and shutoff the display after 30 seconds. The OP was asking how to adjust the timeout on the lock screen. Changing the power settings have no effect on the length of the lockscreen display timeout.
HKCU\ControlPanel\Backlight\
AutoDeviceLockTimeout = xxx
xxx is how long after the screen dims that the device will auto lock. For example a decimal value of 5 will mean that 5 seconds after your backlight dims, your screen will lock.
opposite problem
My Hero would auto dim and then lock previously. I woke up this morning and it won't auto dim or lock. If I don't touch the end button the screen stays brightly lit and on whatever app was running or used last. I did not change any settings but when I went in to reset them and set it to 15 second timeout nothing has changed. Any suggestions?
Related
I set the timeout to 30 minutes and as soon as I hit the power button the lock screen pattern is there? When the device turns off on its own after 30 seconds, it does NOT prompt me for the lock pattern? Is this normal with Samsung phones?
If your timeout is set to 30 mins your phone will not lock for 30 mins. What you want is to go into Settings > Security > timeout. Set that to immediately. Then go to Settings > Display > screen timeout and set that to 30 seconds.
Sent from my SAMSUNG-SGH-I777 using xda premium
MattMJB0188 said:
I set the timeout to 30 minutes and as soon as I hit the power button the lock screen pattern is there? When the device turns off on its own after 30 seconds, it does NOT prompt me for the lock pattern? Is this normal with Samsung phones?
Click to expand...
Click to collapse
That is the way the timeout works. If you leave your phone on, and the screen turns off automatically, and you want to view it again without unlocking, thats what you want the lock timeout for.
There is another timeout for the screen that lithid-cm mentioned that changes how long the screen stays on.
Is there any way to change a setting or something so that the phone never locks by itself? I hate when I leave my phone sitting for a moment and then it locks by itself.
Also, when the phone is locked and then you press the home button, the screen stays on for ages - is there any way to change it so that it only stays on for 5 or 10 seconds (like an iPhone)?
Cheers
You should be able to go into settings/personal password (or similar) & set "screen unlock security" to none/disable personal password security.
Yes. Get an iPhone (You walked into that one). In all seriousness, it's been a while since I've run stock on my phone, but from memory you *should* (not 100% sure tho) set the screen timeout in the display settings to 15 seconds or similar.
Hmm there was no setting there... I've already got lock screen turned off but that doesn't make a difference..
Is there a way to do it with a custom ROM? I need to get a deodexed ROM anyway so I can run Jkay's theme.. any suggestions of which ROM to run?
In hyperdroid there is an option to change how soon the lockscreen activates after the screen turns itself off via screen timeout, as apposed to when you turn the screen off via pressing the power button.
This may also be the case in newer stock roms, I am not sure.
Its in
Settings > Timeout (Under "Screen unlock settings")
Also in
Settings > Display you can change the scree timeout delay (aka how fast it auto turns off)
just put a long cooldown on the lock? swiping of an image is not that bad is it?
Seems like the other LTE SGS3 variants have the ability to have the normal lock screen and a pattern or other security lock screen enabled at the same time. On the i9300, if you enable pattern lock screen, the normal lock screen goes away completely. Meaning that when you lock your phone via the power button or have it timeout and you turn in back on before your pattern timeout is reached, there is no lock screen. I know I can select lock instantly with power key but I'd rather have the pattern kick in after about 5 minutes and have the normal lockscreen active before the 5 minutes.
This is native behavior on the AT&T LTE SGS3 but not on the i9300. Any way to get this working in the i9300?
I'm looking for this option also. My old Incredible took me to the swipe lock screen when I hit power to turn off the screen. But I had it set to require a swipe unlock after 10 minutes. Tried playing with the (Verizon) SGS3 settings and no go. They both turn on at the same time - only after my 10 minutes setting elapses. Other than that, the phone wakes (with the power OR home) to apps on the screen waiting to be accidentally launched.
My lockscreen is no longer working and I have no idea why. I have a 2 min. screen timeout but when I wake up the Nook with the "N" button the screen is already unlocked (I do not have the selection checked that uses this button to unlock). It used to work fine but then more or less stopped. I've tried all kinds of combinations of settings. Sometimes it will work once after changes, but then it stops again.
I've just discovered I can manually lock the screen with a quick press of the power button. That works every time but is sort of beside the point. It should (used to) lock automatically when the screen goes off after 2 min.
And...what exactly are the "screen timeout modes"? Each of the two consists of 3 time intervals but there is no explanation or description of what they are/do. Originally they were unselected and I just had the 2 min timeout. So are these deepening levels of power saving (dim, off, sleep)?
I wish there were some kind of reference for the CM settings. It would really help a noob like me
With the S9+ powered up but the screen black: Press power button and I get the PIN screen as I have selected. In 3 seconds, the screen goes dark again. Can this be extended? The timeout is too short to read notifications before it goes black.
I am not referring to the screen timeout that is easily modified in settings.
Thanks (sorry if this is a dup - I did search)
Answer: 3 seconds is the built-in value
I had a chat session with Samsung and they confirmed that the built-in timeout is 3 seconds and can't be changed. That is the answer.
FYI: They have a very nice tool that allows them to take over your phone and you can watch them work.
Use Case
1. Phone is booted up, uses a pattern to unlock, allows notifications on the lock screen, has 30 second timeout (example)
2. Screen is black
3. Press Power button
4. You get the unlock screen and any notifications that exist - possibly many of them. This is allowed in the notification and lock screen settings
5. You start to read through the notifications to see if there are any that need attention and if not, you just put the phone down
6. In 3 seconds from the point when you get the lock screen and notifications, the screen goes black again unless you do something
The point is that you should be able to set a longer time (e.g., 15 seconds) for the screen to stay on before it goes black. That way you could review the notifications to see if you really want to log in and do something. This would not appear to be a security problem since the phone is still locked.
This is the way it is designed - working as designed per Samsung.
fyi
scott
There seems to be a work around. If you turn on face unlock, but don't point it at your face, it seems the lock screen will stay on and keep trying to find your face. Of course, you may not want to use face unlock.