Related
Think there will be cool silicone covers and unique cases for the Touch HD similar to the iPhone? One thing about my Touch Pro and Tilt I have is they don't make silicone covers due to the slide out keyboard. On rare occasions I've dropped my Tilt on asphalt and scratched it bad.
Just want a good protector for a 1000 dollar phone when it comes out.
Would appreciate any info or rumors of accessories coming out..
Thanks
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
What about those invisible shields? They are transparent stickers essentially that cover the entire phone. I think it would be better to have that as it protects the phone from scratches and still leaves the cool uncased form factor. I saw one on my friend's iphone. Looked fine.
Seidio case for the HD?
I wonder if there will be a Seidio case for the Touch HD, as I'm very satisfied with the one I have for my TyTn II (it literally saved it's life)
tboy2000 said:
What about those invisible shields? They are transparent stickers essentially that cover the entire phone. I think it would be better to have that as it protects the phone from scratches and still leaves the cool uncased form factor. I saw one on my friend's iphone. Looked fine.
Click to expand...
Click to collapse
I will also buy an invisible shield for my HD when i have it, it's more beautiful than the silicone covers.
Temporary Silicone Solution
galaxys said:
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
Click to expand...
Click to collapse
Here is a temporary silicone solution I've been using. Be careful as its a snug fit.
http://www.target.com/Incase-Protec...49637?ie=UTF8&index=target&rh=k:incase&page=1
galaxys said:
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
Click to expand...
Click to collapse
I'm using a black Belkin silicone case meant for an iPhone 3G. I had to cut a hole for the camera and the headphones. It fits, but not too tight. I think it will hold me over until the official HD models hit the market.
It seems there is one sold here
http://bluetrade.eu/index.php?page=product&id=13413
but they are out of stock !!!
Matterhorn said:
I'm using a black Belkin silicone case meant for an iPhone 3G. I had to cut a hole for the camera and the headphones. It fits, but not too tight. I think it will hold me over until the official HD models hit the market.
Click to expand...
Click to collapse
Sounds Like a good idea any chance of some close up pics so we can see how good it fits?
We r in Luck!!!!!!!!!!
http://cgi.ebay.co.uk/Silicone-Case...14&_trkparms=72:1300|66:2|65:12|39:1|240:1318
Enjoy...........
http://cgi.ebay.co.uk/Crystal-Case-...300|66:2|65:12|39:1|240:1318#ebayphotohosting
Or a hard case?
cheap price...i ordered a silicone case until something better comes along.
yeah I also ordered silicone one, I think it protects the glossy frame well
HD Cases
Check here for cases, cheap prices and fast delivery (to Greece approximately 1 week from Hong Kong)
And now they do have silicone and crystal cases
We r in Luck!!!!!!!!!!
http://cgi.ebay.co.uk/Silicone-Case-...1|240:1318
Enjoy...........
Click to expand...
Click to collapse
What means? There are not especially covers for HD !!!!!!!
Found at NetTask.
Thanks to ktsak
dadeluna said:
What means? There are not especially covers for HD !!!!!!!
Found at NetTask.
Thanks to ktsak
Click to expand...
Click to collapse
It's http://www.netimes.com/shop/htc-dopod-touch-hd-t8282-blackstone-c-80_612.html
Enjoy !!!!!!!!!!
What do you think about the original silicon case from HTC (HTC Touch HD Silicon Case SC S420)?
https://www.htcaccessorystore.com/ee/p_htc_item.aspx?i=176956
You think it would fit together with the leather case I am getting from digitec.ch?
http://www.digitec.ch/ProdukteDetails2.aspx?Reiter=Bilder&Artikel=159942
Ascenca
looks nice, but not available until next year... i don't want to wait; i'd rather protect now with something cheaper an purchase HTC's version later.
My silicon arrived from ebay today. Package contains the case, a replacement screen protector (which I will not use - waiting for invisishield) and a useless neck strap (useless in that there is no strap loop on the case!).
The case itself fits easily, makes the Hd easier to hold in the hand, and makes me much less scared of dropping it.
Of course, now I have introduced a new surface into the equation, the propensity for scratches via this method increases. However, the fit is pretty good and I certainly prefer this to having the paintwork exposed all the time.
thedaddyy said:
http://cgi.ebay.co.uk/Silicone-Case...14&_trkparms=72:1300|66:2|65:12|39:1|240:1318
Enjoy...........
Click to expand...
Click to collapse
One of these came today. It is specifically for the THD. The fit is good the cut outs in the right place and the buttons sound and off operable through the rubber.
At £3.49 It will do for now.
I have been searching online retailers and local shops for a leather case for my Touch HD but to no avail, until I have found this in one of the mall in the Philippines while on holiday. I believe this is one of the best genuine leather case available for the HD regardless of the price. The best part of it is the price: Only USD15.00
The leather is not stiff but smooth and soft. The stitching is very well done. All phone controls and buttons are all accessible.
Check out the pix to have an idea how amazing this leather case is.
The pictures does not include the belt clip which also serves as headset/headphone cable organizer. Very, very neat!
looks good, do you know who manufactured it?
MarcusB63 said:
looks good, do you know who manufactured it?
Click to expand...
Click to collapse
It's Capdase. They actually have cases for all other phones including, iphone, blackberries. I actually bought similar cases too for my Blackeberry bold and Nokia 5800.
I'm wondering whether this leather case could be made compatible with Krusell's Multidapt mounting system, so it could be used with their car and bike holder kits. Could you maybe give me the exact dimensions of the swivel thingy that I suppose gets screwed in the back of the case?
Here's the corresponding Krusell data:
outside-diameter (top 2mm): 12,5mm
outside-diameter (lower 2mm): ca 9,5mm
inside-diameter: 7mm
also, do you know what kind of screw is used?
here's a pic of the krusell belt kit (the swivel thingy I'm talking about is obviously the second from the left):
Whoooa! The last pic, where it shows th case being used as a stand raises it's value a lot
Where can we buy this product ??
it's very usefull
rvv said:
I have been searching online retailers and local shops for a leather case for my Touch HD but to no avail, until I have found this in one of the mall in the Philippines while on holiday. I believe this is one of the best genuine leather case available for the HD regardless of the price. The best part of it is the price: Only USD15.00
The leather is not stiff but smooth and soft. The stitching is very well done. All phone controls and buttons are all accessible.
Check out the pix to have an idea how amazing this leather case is.
The pictures does not include the belt clip which also serves as headset/headphone cable organizer. Very, very neat!
Click to expand...
Click to collapse
Very nice!
Could you make a picture of the thickness with the HD inside it? and one with the belt clip?
witm01 said:
I'm wondering whether this leather case could be made compatible with Krusell's Multidapt mounting system, so it could be used with their car and bike holder kits. Could you maybe give me the exact dimensions of the swivel thingy that I suppose gets screwed in the back of the case?
Here's the corresponding Krusell data:
outside-diameter (top 2mm): 12,5mm
outside-diameter (lower 2mm): ca 9,5mm
inside-diameter: 7mm
also, do you know what kind of screw is used?
here's a pic of the krusell belt kit (the swivel thingy I'm talking about is obviously the second from the left):
Click to expand...
Click to collapse
I believe it will not be compatible. I am at work now, I will post additional pictures with belt clip on and the screw itself. I have had Krussel before but it is not as well designed as the belt clip that comes with this Capdase case.
gdiax said:
Where can we buy this product ??
it's very usefull
Click to expand...
Click to collapse
I bought this in a mall in the Manila, Phils. I have search the web but it is not available. Maybe you could try search "Capdase" in Ebay. Even in Manila, it is not readily available in most shops, you really have to ask for it.
Imperium said:
Very nice!
Could you make a picture of the thickness with the HD inside it? and one with the belt clip?
Click to expand...
Click to collapse
I will try to post additional pictures when I get off from work. But I can assure that it still fits my front pocket comfortable without looking happy to see everybody ....I never use the belt clip and screw so that's helped a lot in terms of pocketability.
has anybody bought one of these? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=360140956080
i was thinking about it for my hd.
I got this one from Amazon: http://www.amazon.de/Edel-Handytasc...=sr_1_3?ie=UTF8&s=ce-de&qid=1239309323&sr=1-3
Really strong leather which protects the screen and easy to get out.
http://www.amazon.de/s/ref=nb_ss_ce...lectronics&field-keywords=HTC+Bugatti&x=0&y=0
pg2005 said:
I got this one from Amazon: http://www.amazon.de/Edel-Handytasc...=sr_1_3?ie=UTF8&s=ce-de&qid=1239309323&sr=1-3
Click to expand...
Click to collapse
That's a great one at great price too. I think I've overpaid for my Noreve case and it took them a month to deliver
I use a simple leather case to protect my HD. Bought on ebay where you also get a screen protector with it what is much better than the original one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=400015202575
DRTigerlilly said:
has anybody bought one of these? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=360140956080
i was thinking about it for my hd.
Click to expand...
Click to collapse
Did you get one? That looks sweet!
easyriider said:
I use a simple leather case to protect my HD. Bought on ebay where you also get a screen protector with it what is much better than the original one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=400015202575
Click to expand...
Click to collapse
Have you tried the case? It looks great!
Just ordered one of these.
Hiya guys. Just received my phone today.
I have ordered one of these Beyza SlimLine Leather Pouch Case.
Has anyone had one of these before, and what was their view of it?
Looking for a slim (protective) case, whether it be silicone or leather, pouch or flip-case, so that I can carry the phone in my jeans pocket.
pg2005 said:
I got this one from Amazon: http://www.amazon.de/Edel-Handytasc...=sr_1_3?ie=UTF8&s=ce-de&qid=1239309323&sr=1-3
Really strong leather which protects the screen and easy to get out.
http://www.amazon.de/s/ref=nb_ss_ce...lectronics&field-keywords=HTC+Bugatti&x=0&y=0
Click to expand...
Click to collapse
I'd support that. Got the Bugatti SlimCase two weeks ago, and I'm quite satisfied with it.
PROs:
- Sturdy, quality leather case, offers good protection for the HD.
- Fixed belt loop. (yes there is a belt loop on the back - hard to see on some pictures). No clip that can accidentally slip off your belt.
- Slim fit: The HD's a slim device, and this case doesn't add bulk to it. Sits tightly against the belt, so no bulge at your waist. Comfortable to wear even under a business suit.
- velcro fastening: No chance of the HD accidentally slipping out of the case.
- Good fit around device: The HD fits in just right, and it's not too tight (so no unnecessary pressure on the screen).
- EasyOut strip, really easy to operate: Undo the velcro and pull the strip in one movement - hey presto, the HD is lifted about 1/3 out of the case. Couldn't be easier.
CON:
- Putting the HD back into the case is a bit more fiddly: The EasyOut strip gets in the way, or gets twisted. Not easy to do with one hand.
Overall, a really good belt-able case, and a real bargain too.
(I got mine from Amazon for ~ 10 € incl. P&P!!!!)
N.
You got to watch out for some of those cases on Ebay. I bought one for my X1i when I had it and because it was kinda tight ( needed breaking in ) it wore the paint down on an edge near the control panel. It was felt lined but the outer shell felt more like synthetic leather.
Krussel case here because of the quality and the Multidapt system, my last five cases have been Krussel so I have all the belt clips, windshield brackets etc. already.
Does anybody know if there'll be a pouch for the diamond 2 like for the diamond? Or simply will the Diamond pouch fit the diamond 2?
the diamond 1 pouch does not fit the d2
Don't think there is an official pouch, pdair have quite a few different ones available tho.
G
If you look at the Tracy & Matt unboxing video, its shows an HTC Pouch in the box. However, everyone so far has said it doesn't come in the box. Conclusion? I think there is/will be one, but it will a separate purchase like the with the D1.
I've been looking at the Beyza pouch for the Samsung Pixon. The Pixon has identical size stats to the D2 (well its 1mm wider), so if its just a pouch you are after, that may fit the bill.
Pdair are now selling a vertical pouch without belt clip, just ordered one myself.
available here
galvinize said:
Pdair are now selling a vertical pouch without belt clip, just ordered one myself.
available here
Click to expand...
Click to collapse
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Darrenives said:
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Click to expand...
Click to collapse
Not sure how long delivery will take but will do when I get it.
Horizontal Pouch, HTC Brand
I bought this one: http://www.negrielectronics.com/touch-diamond-leather-pouch-p-2424.html
It is a Velcro closure and the phone does not fit well. further, it does not have a hard side to protect the touch screen. I assume this is a general case by HTC. I bought this, but I will probably continue to use the case from my Trinity, the fit is the same but this at least has some protection on the sides.
In a word, Disappointed. I am not sure why they skipped the case, and then fail to offer a decent one at launch time.
http://www.noreve.com/index.php
Looks like Noreve are going to do one too. Expensive, but nice, classy cases. See upcoming products at bottom of web page.
Asia model comes with those pouch similiar to original Touch Pro.
http://www.eprice.com.tw/mobile/talk/?prod_id=3306&tid=4110889
Just be aware of these pouches
I did not get one with this or the TD1 ... with the TD1, the original one went on stock very quickly and I bought it for almost £10!
While the fitting was slim and snug, I couldn't help thinking that the tight fit had potentially caused light scratches on the rear (front I was not bothered as it had the protector on)
On the day I sold it, I did a very intensive clean on it and noticed there were indeed scratches that corrosponded with the pouch.
It only takes a small bit to be trapped in the pouch - you then slide the TD1 in and that bit goes down with it
I still don't know however what I want for my TD1, at the moment, I am using the original Ipod velour case that was bundled with I think the original 20gb ipods!
http://mobile.brando.com.hk/htc-touch-diamond-2-bw-leather-case-flip-top-_p04094c1213d039.html
http://mobile.brando.com.hk/htc-touch-diamond-2-bw-leather-case-pouch-type-_p04093c1213d039.html
or Krusell Luna fit
hsukirk said:
Asia model comes with those pouch similiar to original Touch Pro.
http://www.eprice.com.tw/mobile/talk/?prod_id=3306&tid=4110889
Click to expand...
Click to collapse
is it possible to buy these pouches any where, as i personally like these the best
da_daman said:
is it possible to buy these pouches any where, as i personally like these the best
Click to expand...
Click to collapse
Yes, I prefer this pouch too. Unfortunately the HTC designation of that pouch is not mentioned on their website (i.e. the HTC PO S390 as for the D1), so a purchase seems to be tricky....
I just bought this http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=360151845729 since i want as thin as possible.
This isn't going to appeal to everyone since they aren't bargin basement cheap but I've just got one of these cases delivered this morning. I went for Nappa cowhide black B on the outside and red suede leather for the lining with no belt clip attached and hidden magnet closure. The case itself looks fantastic, stiching quality is excellent (not a loose piece of thread visible anywhere) and overall protection where its needed the most (on the screen) is hard to beat with the wrap over flap on the front. It took a couple of weeks from order to delivery, but for a case which is made to your own specification, right down to having your name embossed on the front, that isn't bad. If you want a quality product made to you want it, and personalised, give them a go, I'd definitely recommend them. They do a range of different styles so if a fold over horizontal pouch isn't to your liking have a look at the other options.
Nice, i just orderd one too
Nice cases, not cheap although they look very nice...
I have found my HTC Kaiser case that came with phone and I'll use that until something better comes along.
Darrenives said:
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Click to expand...
Click to collapse
Got the case yesterday, it adds quite a bit of bulk so if you're looking for a really slim fit then look elsewhere, other than that it is of good quality and has a nice professional look about it so is ideal for work. It also offers lots of protection for the device.
G
@galvinize: is it possible to take the belt clip off? doesnt look like in promo pictures - but in yours.
edit: could you please take a picture with the front up - or is it just a sliding case?
Thought I'd kick off a chat about the best cases available for the Z3. Either specific ones or more universal ones that are a good fit.
I am thinking about ordering another Fitbag sleeve from Germany which I've had for my last two phones and are excellent. I'm not a fan of clipped on cases as I like the look of the phone itself.
I was tempted by the WCR14 cover which enables wireless charging but they only seem to do it in black or white and since I am getting the copper Z3, I want one that matches really. Also It's about £80
What about screen protector back/front side...any ideas?
Im reciving mine copper also in five days and dunno should i take protectors,case or nothing.
Just ordered a Z3 and it will be my first Xperia. Does it comes /or is it avaliable to buy - a official smartcase cover?
Anyone using Z2 knows?
the phone does not come with any cover ,Also the official cases have not been released yet!
just to share:
i initially bought the casemate barely there (black) case for my Z3, however, after that decided to look out for another case as i felt while it was slim and light, it covered up the beautiful back of the phone, and was quite slippery to hold
ended up, got this to try instead, and so far much happier with it. its a slim, silicon transparent case for the Z3, and showcases most of the back, protect around all sides, and also has better grip!
https://scontent-a.xx.fbcdn.net/hph...828_701629853225972_1110116627307985755_o.jpg
I had the yesoo slim case on the z2 and it is not available for the z3 yet ,I liked it because I can use it with the magnetic dock and it didn't add bulk.
Sent from my iPad using Tapatalk
Where to find that case? I ebayed the words in the picture, to no avail..
Sent from my D6603
I am awaiting this case to be available:
http://www.sonymobile.com/global-en/products/accessories/style-cover-scr24/
Unfortunately, I don't see any dates when this should this available.
I ordered fitBAG sleeve for mine.
Anyone tried this bumper case on the z3? Thinking of getting it for my z3 d6603. The model on the ebay link says L55U. Not sure if it will fit but for 5 bucks i will give it a try
http://www.ebay.com/itm/Soft-Tpu-Wh...t=US_Cell_Phone_PDA_Cases&hash=item23419723f9
I received the Roxfit Made for Xperia Slimline Standing Book Case for Xperia Z3 - Carbon White today from amazon. As always excellent case does add a bit of bulk but protects very well
Why do every case manufacturer want to expose the Xperia doors? It'd be nice to find something less... swiss cheese
because nobody wants to take of the case to reach the USB port. Covering the SIM/SD Card area might be acceptable though.
They have covered the sim/sd card door this time on the roxfit slimline book case
Malner27 said:
I received the Roxfit Made for Xperia Slimline Standing Book Case for Xperia Z3 - Carbon White today from amazon. As always excellent case does add a bit of bulk but protects very well
Click to expand...
Click to collapse
is it an active case?
I'll wait for the Sony one then....
fain2daniel said:
I ordered fitBAG sleeve for mine.
Click to expand...
Click to collapse
Yeah, same here. I went for the red and black napa leather one. I have a black napa leather one for my Nexus 5. Cleans the screen just by sliding it in and out thanks to the microfibre interior, the leather is soft so it slides into a pocket easily but quality so it doesn't get damaged.
It's also really well made with solid stitching and a tight but not overly tight fit to the device. Can't rate them highly enough
fain2daniel said:
I ordered fitBAG sleeve for mine.
Click to expand...
Click to collapse
where did you buy this from?
Official site fitBAG . de
fain2daniel said:
Official site fitBAG . de
Click to expand...
Click to collapse
Yeah, Google does a good job of translating the page and they will ship internationally.
Hey all if anyone looking for the new Pitaka MagEZ Case for S20 series it's finally out. Mine is on the way, Pitaka makes awesome products.
If you plan on ordering anything take a look and use the link below for extra 10% off.
http://pitaka.refr.cc/ivanmann
Got my shipping notification today as well. Ordered the MagEZ and dashboard mount wireless charger. Are you in the US? How long do you think it will take to deliver?
Shipping notice on DHL site updated w Tuesday (4/7) delivery now.
They're really quick with shipping. Have ordered several of their products. I'm in Canada, my case should come this week.
When did you order?
I ordered Monday night and the web site indicated that it would ship the next day.
Here it is Thursday afternoon and I have not received any notification. Clicking on the order link in the original email just shows the same thing: order received. Do they ship from China?
Thinking of cancelling TBH.
Yes they ship from China. You should get something soon. But reach out to their support team in case. They're very responsive and helpful usually.
bigmann77 said:
Yes they ship from China. You should get something soon. But reach out to their support team in case. They're very responsive and helpful usually.
Click to expand...
Click to collapse
Funny, just after dinner I got an email with shipping notice.
I have a tracking number with an origin a state away (NJ), USPS first class package.
Should arrive in a few days.
I want to see what all the hype is about.
I got the magnetic one. I do have magnetic vent mounts from my excellent Evutec cases. I wish they made Samsung cases, by far they are my favorite.
Got my carbon fiber look on too!
wrong section
mali019 said:
wrong section
Click to expand...
Click to collapse
How so?
jlip5617 said:
Got my carbon fiber look on too!
Click to expand...
Click to collapse
Nice, have you tried taking pics in the bright sunlight, off axis and using the flash to see if it produces any unusual artifacts like flaring or hazing?
cpufrost said:
Nice, have you tried taking pics in the bright sunlight, off axis and using the flash to see if it produces any unusual artifacts like flaring or hazing?
Click to expand...
Click to collapse
I haven't noticed any issues so far!
I am waiting for carrier to pickup. Got tracking number ,but not picked up yet
So got my MagEZ and the wireless charger dash mount. Did not expect the metal plates to be so low on the phone body - I guess that's how they don't block the wireless charging coil.
I'm actually more disappointed in the lack of screen coverage. The sides of the phone are the most exposed in this case then any other case I've tried but worst is the lack of lip on the top of bottom. On every other case I've tried, there is at least some gap when I turn it face down on the table - with this case on, this is pretty much laying down flush on the screen itself.
Got my MagEZ today, finally nearly two weeks after ordering. USPS isn't the greatest for sure!
It's a good case. Definitely NOT for protection. I mean it will provide more protection than nothing. In hand it feels nice. The presentation is also good. As in you can tell it's not an Otterbox!
If one want's thinner they'd have to skin their phone. There's something about a naked phone, dunno, the edges feel weird like I'm going to drop it in an instant. It's weird because before the days of non removable batteries it actually didn't feel "wrong" rocking a naked phone...
jlip5617 said:
Got my carbon fiber look on too!
Click to expand...
Click to collapse
So that is a latercase, no Pitaka with metal plates (and still wirelessly charging).
I like the latercases rim being bent upwards but they are missing the metal plates.
Also, I do not like the manufacturers actions around Pitaka and would therefore, personally, not buy from them. But that is my personal opinion only.
corwin_amber said:
So that is a latercase, no Pitaka with metal plates (and still wirelessly charging).
I like the latercases rim being bent upwards but they are missing the metal plates.
Also, I do not like the manufacturers actions around Pitaka and would therefore, personally, not buy from them. But that is my personal opinion only.
Click to expand...
Click to collapse
Agreed. Latercase straight up ripped Pitaka off and just because he has a bigger audience felt he could get away with it.
I got the Pitaka Mag case as well. This is my 3rd Pitaka case. Had this on my s8 and s10 before. This model seems to fit lower on the sides than previous models and the cutout for the charging port is wide open this year. Not sure why. This is still my favorite case because it's strong, super thin, and metal plates for car mount.
sdotagain said:
I got the Pitaka Mag case as well. This is my 3rd Pitaka case. Had this on my s8 and s10 before. This model seems to fit lower on the sides than previous models and the cutout for the charging port is wide open this year. Not sure why. This is still my favorite case because it's strong, super thin, and metal plates for car mount.
Click to expand...
Click to collapse
It's open at the bottom because to close it there would be a very thin strip that would be rather flimsy. Still far better than having the entire bottom open.
My only gripe about this case is how hard it is to take off! But once it's on, it's very solid and doesn't feel like it's peeling away or falling off when you grab the edges like most thin TPU style cases.
I have to say that it is perfect, IMO. I am using Pitaka since the S8 and they are always in a class of their own. I tried like 100 cases over the years and I have settled to this:
- Pitaka Mag Case for daily, normal use. This is the best for me.
- "Self made" Pitaka Pro case (more sturdy) using a dbrand grip case and placing the Pitaka metal plates in the right places under the back skin, salvaged from an old Pitaka case (destructive). This is the sturdy case, still offering magnetic attachment and wireless charging.
corwin_amber said:
I have to say that it is perfect, IMO. I am using Pitaka since the S8 and they are always in a class of their own. I tried like 100 cases over the years and I have settled to this:
- Pitaka Mag Case for daily, normal use. This is the best for me.
- "Self made" Pitaka Pro case (more sturdy) using a dbrand grip case and placing the Pitaka metal plates in the right places under the back skin, salvaged from an old Pitaka case (destructive). This is the sturdy case, still offering magnetic attachment and wireless charging.
Click to expand...
Click to collapse
Good idea! I wish they would make the procase for Galaxy phones. I too use the MagEz case as my daily and now using the Ringke Fusion X as my rugged case when needed. Last year I tried those O shaped metal rings attached to the back of a Tech 21 but it still didn't quite line up with the car mount. I thought about getting the plates from a previous case but luckily been able to resell them for close to 50% value.