Related
Hi All,
I have stumbled across a micro to minisd adaptor for micro sd cards and I was wondering if this would actually work on a HTC Wizard device.
http://351435.trustpass.alibaba.com/product/11709112/Micro_SD_To_Mini_SD_Adapter.html
Theoreticly it should because it's just a bigger size. But maybe the software can't handle it. It would be amazing if it could because they are now selling 8gb micro sd cards! The other option is to just use a 4gb Mini SD card but can't seem to find one that people say is guaranteed to work.
Thanks!
this would be soooo great if it would work...anyone have any info?
A micro-to-mini SD adapter should work, provided the microSD card is supported. The new 4/6/8 GB microSD cards are actually microSDHC cards -- a slightly different standard, one that is not supported by the Wizard. The older 2GB & smaller microSD cards should work on the Wizard using the adapter.
BTW, the 6 & 8 GB cards aren't quite on the market yet, as far as I can tell -- even the 4GB are very hard to find. Newer HTC models (TyTN, Touch, Kaiser, etc.) will support SDHC, provided you have the proper ROM firmware.
I was using one with a 2 Gig card until the USB connector fell off my wizard :-( I'm sure it's not related to the adaptor!)
Gordon
Yes it will work, if you did not figure it out yet.
just to confirm, i have been using a 2gb micro sd card in a mini adapter for about a year...no problems.
i got a kingston microSD card of 2GB
it come with a normal SD to microSD conveter
and a miniSD to microSD converter
both work just fine
2gb sandisk micro-mini working here as well...
The PNY micro-mini SD configuration also works fine.
i have PNY adapter to Mini SD. it works great
Transcend 2GB MicroSD (MLC chip :-( )works gr8 too
snif snifff
no micro sd hc 8go nor 6go for my wizard... sh.t !!!!!
got a wizard with a 2go mini sd 80x, good price, anyone interested ?
nobody ? sh.t i was sure !
I came accross this card :
http://www.netfreez.com/products/Netfreez_8GB_miniSD_Flash_Memory_Card_High_Capacity-10733-207.html
It says "high performance" but nowhere does it say SDHC. It would be incredible if it would work in the MDA (wizard). Anyone know anything about this card?
Oh I see it says High Capacity in the title, crap!
Are there any 6 or 8 gb micro or mini sd that are NOT HC? I want more than 2 gb in my MDA.
HEy guys! I have a small problem. I have a Kingston microSD with miniSD adapter and I wanted to use it with my Wizard, but it's not working! (On my PC it works) Please help! I've tried several ROMs (thought that it's the failure of the software), but no effect. Maybe the device's slot turned dead?
same problem
I have the same problem with my kingston 2 gb micro sd, but I know it accepts 2 gb micro cards because I used to use a lexar and it worked fine.
007wrx said:
Oh I see it says High Capacity in the title, crap!
Are there any 6 or 8 gb micro or mini sd that are NOT HC? I want more than 2 gb in my MDA.
Click to expand...
Click to collapse
I just happened to see your post. I have a 4GB mini in my 8125 wizard and it works great. I have pictures, mp3's and gps software on it. I have never had any problems. I purchased it from Flash Memory Store. It is not an HD card...they also sell those. I have not seen any 6 or 8GB yet!!!
Here is the link:
http://www.flash-memory-store.com/qmemory-4gb-mini-secure-digital1.html
Hello,
i have the P4350 with HTC original WM6.0 ROM.
Could anyone tell me, please, what´s biggest capacity of microsd the Herald could handle?
Thank you
Best regards
Mikas
no problem
im using a 8 gb micro sd card. Its working fine only when he is loading my 7,5 gb of music in audio manager, he is sometimes a little slow
So i use GS player and that works perfect!
regards,
taita said:
Hello,
i have the P4350 with HTC original WM6.0 ROM.
Could anyone tell me, please, what´s biggest capacity of microsd the Herald could handle?
Thank you
Best regards
Mikas
Click to expand...
Click to collapse
The Herald supports micro SDHC. Which, theoretically, maxes out at 32gb.
Does it straight-up support SDHC, or does it require some sort of program or reflash?
plug & play for my 4gig SDHC
bugsy714 said:
plug & play for my 4gig SDHC
Click to expand...
Click to collapse
I've got a 8GB SDHC card.. Works like a dream. Only music is a bit of a problem! but oh well..
8Gb SDHC, no problems, just plugged right in. On the funny side I had to buy a new cardreader for my PC due to the fact that it supported only 4Gb.
How to read MicroSD card on PC?
I have 2GB MicroSD card that comes with the Wing. I can use ActiveSync to transfer files from my PC to the card without problem, but at a very slow speed. For large movie files around 1GB, I thought I could put the MicroSD in the card reader on the PC and copy the file over faster. However, my Win XP insists that the card is not formated or the format is unknown. Do I need any special driver for my PC to be able to read/write to the Wing MicroSD card? Thanks.
I've found the 8gb sdhc cards but cannot find any 16gb or larger cards. Anyone know where I might be able to find them?
Thanks
tphone said:
put the MicroSD in the card reader on the PC
Click to expand...
Click to collapse
Card reader BUILT INTO the PC? I've seen a laptop (a few years old) with a built-in reader that was incompatible with the MicroSD+SD adapter. The $10 25 in 1 reader by Targus that I got at Radio Shack works just fine.
tphone said:
I have 2GB MicroSD card that comes with the Wing. I can use ActiveSync to transfer files from my PC to the card without problem, but at a very slow speed. For large movie files around 1GB, I thought I could put the MicroSD in the card reader on the PC and copy the file over faster. However, my Win XP insists that the card is not formated or the format is unknown. Do I need any special driver for my PC to be able to read/write to the Wing MicroSD card? Thanks.
Click to expand...
Click to collapse
Hi, my wing came directly out of the box and did not include a 2gb microsd card, did I get ripped off?
deinly1 said:
Hi, my wing came directly out of the box and did not include a 2gb microsd card, did I get ripped off?
Click to expand...
Click to collapse
no, i never saw a wing come out of box with a mem card b4...
i had to buy one when i got mine as did most of my friends. if they didnt have a older mem card from a old phone
I just got a 8GB, so far everything works great.
another 8 gb working perfect
Anyone know the P4350 compatibility of C4's micro SDHC (4 or 8gb)
Or only Class 2 micro SDHC are compatibles?
Thank you so much to everybody
I'm using 8GB Sandisk micro SDHC card. Working perfect.
MAGO MERLINO said:
Anyone know the P4350 compatibility of C4's micro SDHC (4 or 8gb)
Or only Class 2 micro SDHC are compatibles?
Thank you so much to everybody
Click to expand...
Click to collapse
Hi to everybody!
I have had a possibility to try a 8Gb Class 4's MicroSDHC and it work perfectly!
Bye bye
MAGO MERLINO said:
Anyone know the P4350 compatibility of C4's micro SDHC (4 or 8gb)
Or only Class 2 micro SDHC are compatibles?
Thank you so much to everybody
Click to expand...
Click to collapse
Im using a 8gig class 4 kingston with no problems. Just slapped it in there and away i went. although, it doesnt want to let me save messange and email attachments on it just yet. everything else is just fine.
I have a Class 6 4GB working perfectly =]
deinly1 said:
Hi, my wing came directly out of the box and did not include a 2gb microsd card, did I get ripped off?
Click to expand...
Click to collapse
same here! I didnt even get a card with mine at all
does anyone have wm6.1 running and sandisk 8gb microsd sdhc card. does it work for you did you have to format it to 2 4gb drives. thank for any input
ltxda im pretty sure is running the 8gb on the ap 4.0 beta rom. works there. i believe he is also getting the 12gb soon or already has ones. should be working fully and show full 8gb on single partition.
I have a sandisk 8gb microsd and it came with a sandisk micro to mini adapter. i have the htc x7500 and i have tried the following roms. htc wm6, pk 3.0 dual, wm6.1... NONE of these have recognized the 8gb sd card at all. i put it in a blackjack II and it recognized it with no problem at all. i could write to it and it recognized all 8gb. I am not sure what i am doing wrong but i could use some help. i also tried the cab from this tread http://forum.xda-developers.com/showthread.php?t=361131 and it did not work at all. Thanks for any help you can provide
Looks like you have to wait for AP 4.0 then!
irus said:
I have a sandisk 8gb microsd and it came with a sandisk micro to mini adapter. i have the htc x7500 and i have tried the following roms. htc wm6, pk 3.0 dual, wm6.1... NONE of these have recognized the 8gb sd card at all. i put it in a blackjack II and it recognized it with no problem at all. i could write to it and it recognized all 8gb. I am not sure what i am doing wrong but i could use some help. i also tried the cab from this tread http://forum.xda-developers.com/showthread.php?t=361131 and it did not work at all. Thanks for any help you can provide
Click to expand...
Click to collapse
Hi
It seems to be unusual, because i used sandisk 8gb microsd with mini adapter on PK 3, PK 3 dual and WM6.1 roms. it worked on all of them. As far as i know that even 16gb and 32gb also works on Athena. Reformat the microsd (Fat32) then try, it should work.
Good luck
irus said:
I have a sandisk 8gb microsd and it came with a sandisk micro to mini adapter. i have the htc x7500 and i have tried the following roms. htc wm6, pk 3.0 dual, wm6.1... NONE of these have recognized the 8gb sd card at all.
1 had similar problems with a 6 micro and mini adapter. I finally got the little bugger seated just right. I don't know whether it is the Athena or the adapter but it took me about 6 or 7 tries before my 6 gb showed up the good new for me is that once seated no more poblems since.
Click to expand...
Click to collapse
c1oudrs said:
irus said:
I have a sandisk 8gb microsd and it came with a sandisk micro to mini adapter. i have the htc x7500 and i have tried the following roms. htc wm6, pk 3.0 dual, wm6.1... NONE of these have recognized the 8gb sd card at all.
1 had similar problems with a 6 micro and mini adapter. I finally got the little bugger seated just right. I don't know whether it is the Athena or the adapter but it took me about 6 or 7 tries before my 6 gb showed up the good new for me is that once seated no more poblems since.
Click to expand...
Click to collapse
Hi
If your card is SDHC (Whatever capacity) it should read by X7500. I use the Kingston mini adapter and it reads 2, 4, 6, 8gb cards without problems. I feel your mini adapter may be the problem. try another adapter.
Good luck.
Click to expand...
Click to collapse
I have the sandisk 8gb with the adapter and it works just fine. 3.0 dual. Took out 4gb and inserted 8gb with no problems. Athena is compatible to 32gb on the HTC web site.
sabes143 said:
c1oudrs said:
Hi
If your card is SDHC (Whatever capacity) it should read by X7500. I use the Kingston mini adapter and it reads 2, 4, 6, 8gb cards without problems. I feel your mini adapter may be the problem. try another adapter.
Good luck.
Click to expand...
Click to collapse
that's excatly what i did and it worked, it was a bad mini to micro converter
Click to expand...
Click to collapse
I can confirm the "bad micro to mini adaptor" issue, my Sandisk 8 micro SDHC card works absolutely flawless now that I got hold of a Kingston adaptor, prior to that I used a cheap Chinese noname adaptor, and with that it took a lot of fiddling to get my Ameo to see the card, and it would disconnect constantly. this is true with the AP 3 ROM, never tried WM 6.1.
hmeyer said:
I can confirm the "bad micro to mini adaptor" issue, my Sandisk 8 micro SDHC card works absolutely flawless now that I got hold of a Kingston adaptor, prior to that I used a cheap Chinese noname adaptor, and with that it took a lot of fiddling to get my Ameo to see the card, and it would disconnect constantly. this is true with the AP 3 ROM, never tried WM 6.1.
Click to expand...
Click to collapse
well the micro sd that i bought was a 3-in-1 kit from sandisk, which is why i thought it was my phone cause all the parts were new and by sandisk, but i guess not oh well it works now.
Sandisk 8gb
My Athena works like a charm with 8GB Sandisk memory card . I have the black dual rom 3.0
irus said:
does anyone have wm6.1 running and sandisk 8gb microsd sdhc card. does it work for you did you have to format it to 2 4gb drives. thank for any input
Click to expand...
Click to collapse
Hi
I can use a 8 GB SanDisk microsd with another mini adapter. I bougth another micro sd sandisk adapter and the card is completely usefull. It won't be reconize with the include adapter with the card.
If you see carefully they has diferent id number.
Regards.
Maybe they neglect the quality control with these adapters.....
Any adapter will work with a micro SDHC provided (of course) that it isn't faulty. There is no issue with compliance between mini and micro adapters and the SDHC format as they simply act as a terminal bridge.
On similar topic - despite the abundance of 'SDHC READY' usb card readers available to buy - for more money than a standard reader - I am yet to find ANY so-called 'non-compliant' reader that DOESN'T read SDHC cards, other than internal laptop varieties.
I have an external cheapo N95 dock with a card reader, two different poundland (yes $2) card readers and one I got free with a memory stick duo nearly 3 years ago.
ALL read and write to SDHC cards fine....
strange that....
EAlvarado said:
Hi
I can use a 8 GB SanDisk microsd with another mini adapter. I bougth another micro sd sandisk adapter and the card is completely usefull. It won't be reconize with the include adapter with the card.
If you see carefully they has diferent id number.
Regards.
Click to expand...
Click to collapse
Beware Ebay fakes
i bought a sandisk 2gb micro sd came with a mini sd adapter. It fits perfectly on my htc wizard/ cingular 8125. IT EVEN CLICKS IN! but once i go to storage under memory it says storage card not installed? WTF is wrong im on WM 5. any help would be apreciated. before you guys start saying stupid crap like its fake, broken or gay.
1. I BOUGHT IT LEGIT FROM BEST BUY
2. ITS NOT BROKEN
3. WORKS WITH MY XPRESS MUSIC NOKIA
4. IT IS NOT SDHC.
5. THERE IS NO LOCK/ UNLOCK TRIGGER IN THE MICRO SD CARD OR THE MINI SD CONVERTER/ ADAPTER
never mind i had to clear storage ended up losing everything
Hi there,
I was wondering if we can use the usb adapter to connect an external HD to the device... can we?!
Shlomikalfa said:
Hi there,
I was wondering if we can use the usb adapter to connect an external HD to the device... can we?!
Click to expand...
Click to collapse
I use a 64gb Flash drive formatted to FAT32 thru one of those cheap ebay usb adapters and it works fine. Comes up as UsbDriveA.
Shlomikalfa said:
Hi there,
I was wondering if we can use the usb adapter to connect an external HD to the device... can we?!
Click to expand...
Click to collapse
Supposedly you can, however, in order to accomplish this, first the external HDD would have to be formatted in FAT32, or possibly EXT2/3/4; something which is natively recognized by the 7.7 Also, since the USB adapter only supplies a minimum amount of power (150mA I think), the HDD would have to be externally powered, either by its own power adapter, or by connecting through a powered USB hub (assuming the hub also has enough power to run the HDD).
It didn't recognize my external 500GB NTFS drive. I have a spare that I can format with FAT32 and will try that just for grins if I get a chance tomorrow. Otherwise, meh.
Update: I tried this with an external USB (self-powered) drive formatted in FAT32 and I got an error message saying "High Powered USB Device Connected: Cannot connect to...."
Not a big deal at all, really.
Just received a Corsair 128GB flash drive(Flash Voyager) today that I bought on Ebay for $45 . It was formatted to exFAT,which is Microsoft's newest file system,rather then FAT32 and allows files bigger then FAT32's 4GB max file size.
It works great on the 7.7 so exFAT is supported and even plays HD movies and lets you transfer files to the 7.7 and back.
I already had the 30pin to usb adapter.
Hi,
Great news. Thank you 7harper
Could you please post the ebay link from which you've purchased the key. I can't even find 128GB flash drive for this price. Thx !
are the usb connection kit for 8.9 and 10 inch abs compatible with p6800 ?
geogetski666 said:
are the usb connection kit for 8.9 and 10 inch abs compatible with p6800 ?
Click to expand...
Click to collapse
Yes, as are any of the other accessories which use Samsung's 30-pin connector.
7harper said:
Just received a Corsair 128GB flash drive(Flash Voyager) today that I bought on Ebay for $45 . It was formatted to exFAT,which is Microsoft's newest file system,rather then FAT32 and allows files bigger then FAT32's 4GB max file size.
It works great on the 7.7 so exFAT is supported and even plays HD movies and lets you transfer files to the 7.7 and back.
I already had the 30pin to usb adapter.
Click to expand...
Click to collapse
How did you manage to get the 7.7 to read/write exFAT formatted disk? I can't seem to make it work here. Tried both Asian and European ROMs but in vain. Can anybody else who has a USB connector with an exFAT stick confirm this?
Thanks.
Hey...
Just wanted to let everyone know that a USB A Male to A Female won't really help much...
For a matter of fact it won't do anything... it's like an elongation cable of 8cm which is crap!!! I guess I wanted to get a Female-Female but came out a bit of a retard...
I wanted to use the 30pin to USB cable, connect it to a Female-Female converter and shove my other USBs on the other end.... wondering if that will work....
Anyhow that's just my 2 dimes...
have a nice day,
SK.
exFat doesnt work on micro sd cards in built-in slot so I guess it won't work on any other medium...
You can use any kind of mass storage and file sistem, nfts works too check my tutorial in the general topic, you can mount a nftsnhard disk drive (selg powered) and read write it from p6800
Raziel_Sicily said:
You can use any kind of mass storage and file sistem, nfts works too check my tutorial in the general topic, you can mount a nftsnhard disk drive (selg powered) and read write it from p6800
Click to expand...
Click to collapse
Have you actually been able to do that with a powered USB harddrive? I got an error message saying "high powered device" when I plugged one in to the Tab.
burhanistan said:
Have you actually been able to do that with a powered USB harddrive? I got an error message saying "high powered device" when I plugged one in to the Tab.
Click to expand...
Click to collapse
I have tried three different external hard drive assemblies ( one desktop, two portable) all with external power applied. One of the portables always triggers the High Power Device shutoff. So I think it depends on the drive box interface electronics.
7harper said:
Just received a Corsair 128GB flash drive(Flash Voyager) today that I bought on Ebay for $45 . It was formatted to exFAT,which is Microsoft's newest file system,rather then FAT32 and allows files bigger then FAT32's 4GB max file size.
It works great on the 7.7 so exFAT is supported and even plays HD movies and lets you transfer files to the 7.7 and back.
I already had the 30pin to usb adapter.
Click to expand...
Click to collapse
45$ ? really ? We need to see that !
Just want to reconfirm that the OEM Samsung USB & SD Connection Kit for Samsung Galaxy Tab will work for our 7.7?
I read that it is not supported for the original 7.0 and the 7.7 tablet - directly from the Samsung store.
Would be really sweet if it does work.
What I want to do is have it read my SD memory card.
Anyone?
whoknows86 said:
Just want to reconfirm that the OEM Samsung USB & SD Connection Kit for Samsung Galaxy Tab will work for our 7.7?
I read that it is not supported for the original 7.0 and the 7.7 tablet - directly from the Samsung store.
Would be really sweet if it does work.
What I want to do is have it read my SD memory card.
Anyone?
Click to expand...
Click to collapse
It works fine.
murmur70 said:
It works fine.
Click to expand...
Click to collapse
I got it! I've tested it out and everything seems to be working out. However, I can't seem to get my 128 GB SD to be recognized with the SD Adapter.
It comes up as "SD card blank or unsupported filesystem"
I've formatted the card to NTFS and ext4 to no avail.
Any suggestions?
Edit: I got Fat32 to work with my 128 GB SD card. With the limitation of Fat32, I won't be able to transfer a file larger than 4 GB. Anyone how to get around this issue?
As stated by someone else earlier in this thread, try formatting with exFAT.
Is there anyway to connect 2.5 external HD?
I mean, using external power kinda defeat the purpose...