I have made GoldCard for Mega, extract RUU_signed.nbh from shipped firmware. Need rename RUU_signed.nbh to MEGAIMG.nbh or MEGIMG.nbh or ...? And how to start bootloader mode on Mega? Thanx.
You can start bootloader mode in mega by pressing and holding vol down and reset.
Can you tell me which one rom you want to change in phone??
Is it possible to upload any rom to mega when have a gold card??
wojtekml said:
You can start bootloader mode in mega by pressing and holding vol down and reset.
Can you tell me which one rom you want to change in phone??
Is it possible to upload any rom to mega when have a gold card??
Click to expand...
Click to collapse
I try change WWE 2 RUS, but have troubles... Bootloader mode ok, but quickly blink message about image and again bootloader... Image file name is MEGAIMG.nbh ?
Related
What does this mean? I have flashed roms while just being connected to the conputer, the rom flash utility. Is this saying that I should save it to a sd card and flash that way while in the bootloader mode (never have been in bootloader mode but read a little about how to get into it.) Thanks for any help.
Just a Noob looking for help.
JMizzo
naw it means put the phone in bootloader, hold volume down + power + put the stylus in at the same time..hold till you see the tri colour screen. then plug the phone into the usb (the word 'serial' will change to 'usb) and then run the RUU like normal
hope that helps mate
taking advantage of this thread, If I want to flash to latest sprint ROM can I just flash this rom if my phone is already unlocked? Flashing to latest sprint rom relock my device and change radio?
I always flash a dump version but I want to try the new from sprint.
Thanks for your answers.
My n900p is hardbricked. I had tried booting into recovery after installing CWM from playstore. I read on this forum that i can use a debrick image. Can someone send a link? My device ran lollipop. Its n900p
nanatheo said:
My n900p is hardbricked. I had tried booting into recovery after installing CWM from playstore. I read on this forum that i can use a debrick image. Can someone send a link? My device ran lollipop. Its n900p
Click to expand...
Click to collapse
Is it just stuck on the boot logo ? ( soft brick ) If you can boot into download mode ( by pressing power, menu, and volume down buttons at the same time, then a new page will come up than press the volume up button ) if this works than your device is not hard bricked. Hard bricked is when nothing works you press the power button and the screen does not light up at all with a charged battery, and yes there is a file that you can place on your sd card to place the device into download mode.
Ok lets assume you can get into download mode. Just Odin flash a new Lollipop OS, click on rom flashing basics in my signature and follow the instructions make sure you flash The Lollipop OS Twice to get a clean install. If you do have a hard brick let me know I have the debrick file to put on your sd card, or you can buy a USB jig, or make one ( there are several youtube videos that show how to do it if you have an old plug laying around ) to get your device to boot into download mode.
It wont go to download or recovery mode. I will be glad if you can get me the debrick file
nanatheo said:
It wont go to download or recovery mode. I will be glad if you can get me the debrick file
Click to expand...
Click to collapse
Edit: First you could try to plug your usb charging cable in to a PC and your device then try the three finger method ( press the power, menu, and volume down buttons at the same time ) to see if it will boot up into download. ( this supplies power in chase the battery is dead )
Or you could build a usb jig to boot into download mode the link is here https://www.youtube.com/watch?v=Rdn5GoRjhn0
Ok first its been a long time. I have three unbrick files I can't remember which one works, I can tell you how to do it.
First pull the battery then pull your sd card, hopefully you have the adapter for the sd card so you can install it in your PC. Once installed in your PC you need to format (erase) all the data on the sd card.
Now copy and paste "one" of the unbrick files on the sd card. Replace the sd card back in the device and reinstall the battery and try to boot the device. It should boot in to download mode. Then you should be able to Odin flash from there.
Here are the links to the unbrick files 1. http://www.mediafire.com/download/c396cy9uxyg7mck/debrick.img 2. http://www.mediafire.com/download/l6q1152x5c9d4h6/N900PUnbrick_IMG 3. http://www.mediafire.com/download/l290jcibb29q4r0/Unbrick_IMG.gz
Remember to only use "one" at a time, and the sd card needs to be blank before you install the files, I hope one works for you it can't hurt to try.
Hello Members
I Have Hard Bricked Huawei Y6 Pro [TIT-AL00] "No Recovery" "No Fast Boot Mode" And Mobile Hang On Huawei Logo
Please Help:crying::crying::crying:
You need to give more information so people can help you.
What were you doing just before this happened?
Does it charge when plugged in?
Have you tried to fix it? if so what have you tried?
Anything else that might be relevant!
shakirbaloch said:
Hello Members
I Have Hard Bricked Huawei Y6 Pro [TIT-AL00] "No Recovery" "No Fast Boot Mode" And Mobile Hang On Huawei Logo
Please Help:crying::crying::crying:
Click to expand...
Click to collapse
Hold volume down and power at same time
shanman-2 said:
You need to give more information so people can help you.
What were you doing just before this happened?
Does it charge when plugged in?
Have you tried to fix it? if so what have you tried?
Anything else that might be relevant!
Click to expand...
Click to collapse
tnx for replying
by mistake i wiped system in twrp recovery
i have unlocked bootloader and twrp recovery
by phone will not go to fastboot mode or recovery option
phone only hang on huwei screen
sorry for bad english
shakirbaloch said:
tnx for replying
by mistake i wiped system in twrp recovery
i have unlocked bootloader and twrp recovery
by phone will not go to fastboot mode or recovery option
phone only hang on huwei screen
sorry for bad english
Click to expand...
Click to collapse
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
shanman-2 said:
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
Click to expand...
Click to collapse
phone not able to go to recovery and fastboot mode
:crying:
shakirbaloch said:
phone not able to go to recovery and fastboot mode
:crying:
Click to expand...
Click to collapse
Then try the second option. You will have to do a bit of reading but I am pretty sure you will be able to get it going again.
shanman-2 said:
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
Click to expand...
Click to collapse
I downloaded a stock rom form your huawei link
but it is SD Card update file
its not a sp flash tool file :cyclops:
please give me sp flash tool file link if you can find one
sorry again for my bad english
shakirbaloch said:
I downloaded a stock rom form your huawei link
but it is SD Card update file
its not a sp flash tool file :cyclops:
please give me sp flash tool file link if you can find one
sorry again for my bad english
Click to expand...
Click to collapse
Google is your friend, friend!
http://huawei-firmware.com/rom/huawei-y6-pro/titu02/133
shanman-2 said:
Google is your friend, friend!
http://huawei-firmware.com/rom/huawei-y6-pro/titu02/133
Click to expand...
Click to collapse
thanks but this is also sd card update file link no sp flash tool
It has instructions on how to install update.app firmware, have you tried it?
did you fix your problem .. i have same problem here
above
hello, this works for me everytime . This problem mostily occurs when you wipe or clean a catch memory in huawei TIT-u02 /A00 .
if you can not access the recovery then do the following
1. copy the dload file to you sd card
2.insert the sd card to your phone
3. Press simulitaniousury power+vol up + volume down at once
4.One the phone boots , release only power button while still holding vol up +vol down
5.release vol up +volume down at once when you see android log (installing system update )
Note : the phone will repeat the isntalling system update and errosing more that 6 time . then your phone will restart
Hello guys, I tried to root my realme GT CN version C17. I successfully unlocked the booter but when I was trying to root it and it suddenly turned black and now my phone bricked, it just stays black and won't turn on whatever I do, and I can't enter even fast boot, is there any way to get it back working?
I would appreciate any help. Thanks.
Hello my friend, you will be able to recover your device by accessing download mode, then flash the VMbeta files from your original ROM. you need to download the CN C17 ROM and extract the files Originals, then flash process. To get out of this black screen hold volume up and down together with power on once the device vibrates hold volume down and power on you will have access to download mode.
Luccas Oliveira said:
Hello my friend, you will be able to recover your device by accessing download mode, then flash the VMbeta files from your original ROM. you need to download the CN C17 ROM and extract the files Originals, then flash process. To get out of this black screen hold volume up and down together with power on once the device vibrates hold volume down and power on you will have access to download mode.
Click to expand...
Click to collapse
Man, thanks so much, you saved my day!
wlanguide said:
Man, thanks so much, you saved my day!
Click to expand...
Click to collapse
managed to solve ? did you install root? which tutorial did you use?
Luccas Oliveira said:
managed to solve ? did you install root? which tutorial did you use?
Click to expand...
Click to collapse
Yes, I managed to root my phone and it works. Check this out: https://forum.xda-developers.com/t/how-i-rooted-my-international-eu-realme-gt-5g.4423459/
However I am still working on the fingerprint issue with certain apps, they won't allow me to use the fingerprint to sign in. Any suggestions?
I need help creating of finding a debrick image for a J600FN.
I tried following this guide: https://forum.xda-developers.com/t/create-debrick-img-from-stock-rom.3367325/#post-66593246
But when I download any stock firmware for this phone, there's no NON-HLOS.bin
I also found this thread: https://forum.xda-developers.com/t/...ardbrick-note-4-all-qualqomm-devices.3488082/
With a download link to a zip to create one. Maybe someone who stumbles upon this is kind enough to run this on their phone and send me the image? I'd really apprecciate that
Thanks to @rpdroky I found a solution:
Turn off the phone , hold volume up + volume down and insert yre data cable , dont press the power button , it should go in download mode
Click to expand...
Click to collapse
In my case this worked, the phone went into download mode and I then used Odin to reflash the stock firmware