Hello everyone, my Advantage now is only on Bootloader and say:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
This happen because i use the X7510 hrd spl unlocker from wiki page.
What can i do now?.Please HELP ME.
I try with some ROM's and hrd spl's and nothing.PLEASE HELP ME.
vegaz said:
Hello everyone, my Advantage now is only on Bootloader and say:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
This happen because i use the X7510 hrd spl unlocker from wiki page.
What can i do now?.Please HELP ME.
I try with some ROM's and hrd spl's and nothing.PLEASE HELP ME.
Click to expand...
Click to collapse
You need to flash with the original rom that came with your advantage.
As far as I can remember you can only do the hard spl from an activesync connection so flash the right rom first.
I don't know what is my right ROM for my HTC.And don't have support in HTC.COM...
Please tell me what is my right HARD SPL for this version?
I can't find original ROM for my HTC
Please i am verry confused?
PLEASE PLEASE PLEASE
vegaz said:
I don't know what is my right ROM for my HTC.And don't have support in HTC.COM...
Please tell me what is my right HARD SPL for this version?
I can't find original ROM for my HTC
Please i am verry confused?
PLEASE PLEASE PLEASE
Click to expand...
Click to collapse
The bootloader screen you showed is of an unlocked athena
This is the wiki page
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena
It has an ftp link to some original roms
ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/
and some wm6 tmobile updates
http://wiki.xda-developers.com/index.php?pagename=Athena_WM6Upgrades
try to load the wwe ones first and once you have done this apply the unlocker from olipro to be able to load cooked roms
Once this has been done you should have spl 1.2 and will be able to load spl 1.2 roms
Of course , most of the latter roms are SPL 3.5 which is changed by using the AP4 rom.
Good luck
No, I can't put nothing in phone ....
Allways i get error (INVALID VENDER ID, ERROR UPDATE TOOL...) and more, more.When i try to put ROM from MINI SD i get error 00028002, or 00068002.
PLEASE HELP ME GUYS
vegaz said:
No, I can't put nothing in phone ....
Allways i get error (INVALID VENDER ID, ERROR UPDATE TOOL...) and more, more.When i try to put ROM from MINI SD i get error 00028002, or 00068002.
PLEASE HELP ME GUYS
Click to expand...
Click to collapse
To load from the sd card you need to extract the nbh file from the package and rename it athe.nbh (or something like that)
you also have to remove the sim card.
did you do this?
If you did, you are probably experienced and you could try talking to cmonex on IRC
She still uses this mc and helped write the unlocker software
Yes I try with SD upgrade but...Nothing aways i have error 00068002 or 00028002.
vegaz said:
Yes I try with SD upgrade but...Nothing aways i have error 00068002 or 00028002.
Click to expand...
Click to collapse
Hey vegaz, I see you got your athena working again by using cmonexs mac1exe.
did you get to talk to her on irc or did you just try it?
I saw you post last night but I was too busy to talk.
I thought from what y ou posted that your SPL was not corrupted.
Anyway am interested in the process that led to your solution
regards lakeman
vegaz said:
Hello everyone, my Advantage now is only on Bootloader and say:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
This happen because i use the X7510 hrd spl unlocker from wiki page.
What can i do now?.Please HELP ME.
I try with some ROM's and hrd spl's and nothing.PLEASE HELP ME.
Click to expand...
Click to collapse
(sorry for my english)
I have the same problems. Here is the solution
http://forum.xda-developers.com/showthread.php?t=592730
I fix my problem with help from CMONEX
vegaz said:
I fix my problem with help from CMONEX
Click to expand...
Click to collapse
that'sgreat.
did you consider a donation to her paypal account in her sig on xda?
Related
Just upgrade my X01HT to 1.33.761.4 but the bootloader also upgrade to 1.09. How can I downgrade to 1.04? Thanks
http://forum.xda-developers.com/showthread.php?t=284401
steiale said:
http://forum.xda-developers.com/showthread.php?t=284401
Click to expand...
Click to collapse
Just downgrade to 1.04 now, thanks
Confirmation for the downgrade_spl
Hello
i got the file downgrade_spl.rar from net. After unzipping with winrar i see a file "downgrade_spl.nbf" inside it of size 769kb. Please confirm me if this is the correct file.
Also please let me know where do i find "ROMUpgradeUt.exe" file.
Thanks
This is the wrong filesize!
give me an e-mail and i`ll send u a tools.
please help me!!!!
I need tool for O2 trion, please help me.thanks
I need files, too.
Hello.
I'm searching for the files, "Downgrade_spl.nbf" and "ROMUpgradeUt.exe".
Anyone tell me where I get there, please?
and,
http://forum.xda-developers.com/showthread.php?t=284401
This solution is useful for SPL1.09?
version 1.09
x01ht bootloader version 1.09 can unlock rightnow ma...?please
unfortunately no.. pof mentioned something about the new ROM not having the write feature..
mizuchi said:
unfortunately no.. pof mentioned something about the new ROM not having the write feature..
Click to expand...
Click to collapse
correct. it requires to be able to flash the radio stack in order to unlock it, but the radio stack of that new rom seems to be read only and flashing another radio stack is not possible at this time.
I could not find in google as well but get somewhere else with slighly different filename. Not sure the same one or not. Can somebody please confirm,
Get it here.
http://www.filemirrors.com/search.src?type=begins&file=DownGrade
It's possible.
Hello I'm french, first sorry for my bad english.
I just bought a V1605 from england that I have immediatly unlocked.
I have tested French qtek ROM 1.18.256... but it's very slow and there are many bugs, after that I have tested a WWE qtek ROM 1.18.416... with bootloader 1.06 just for see if TCPMP was better and it is!
But I wanted the last Qtek ROM, so I have put the original ROM of my vodafone in order to downgrade bootloader to 1.04, it's very simple!
Then I've installed the latest QTEK ROM 1.35 with bootloader 1.09, and now after few very fast manipulations , I have bootloader 1.04 and radio 1.20.
So I can test every ROMs I think...
For the moment, I can see that this ROM (1.35) is very fast, and TCPMP works better but for the video it is the same than vodafone 1.20 or tytn 1.18.416 .
ghz said:
I could not find in google as well but get somewhere else with slighly different filename. Not sure the same one or not. Can somebody please confirm,
Get it here.
http://www.filemirrors.com/search.src?type=begins&file=DownGrade
Click to expand...
Click to collapse
Doesn't look like those are relevant.
1.04 to current boot rom?
After downgrading to 1.04 and doing all the upgrades, is there any reason to reupgrade 1.04 to a more current boot rom?
hi there,
seems i`m not able to downgrade after after flashing the 1.35 rom. my bootloader remains 1.09 and the downgrade_spl (1.8mb rar) tool doesn`t work properly. i always have to recover my device when i try to run the upgrade. is there something i do wrong or is my downgrade_spl the wrong one?
thanks jammerlappen
additional questions: am i able to flash a) other radio roms b) complete roms with bl 1.09 and supercid?
jammerlappen said:
is there something i do wrong?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104&version=2
jammerlappen said:
additional questions: am i able to flash a) other radio roms b) complete roms with bl 1.09 and supercid?
Click to expand...
Click to collapse
a) no
b) yes
may something be wrong with the link in your llink?
thank you anyway! it is good news, i didn`t break my tytn (-:
it is an old revision of a page where there where the instructions initially... so the link is not there anymore... but you said you have it.
hmmm, the files i have obviously do not work
I read in wiki "Bootloader 1.06 and 1.09 do not have 'rtask' command, this means: you will not be able to do radio upgrade only on your Hermes, you will stay always with the Radio version contained on the ROM you flash"
Does that mean that my Tytn i can upgrade just all completed ROM?
I try to install just radio rom, i have error 114.
May i install a "RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10 _108 _Test.exe" ??? in my Tytn?
My IPL is 1.00 and SPL 1.06
Thnks.
Don't care about 1.06 or 1.09 of SPL, both can be down graded to 1.04. After that you can unlock CID and up any rom you want.
I don't know how to put the file in this mail but I can help you by sending it per email. Just give me your address.
Don't flash the entire new roms or you will be losing the ability to change your radio roms.
nugift said:
Don't care about 1.06 or 1.09 of SPL, both can be down graded to 1.04. After that you can unlock CID and up any rom you want.
I don't know how to put the file in this mail but I can help you by sending it per email. Just give me your address.
Click to expand...
Click to collapse
[email protected]
Before i have bricked one wizard (wronlgy installed a chinese ROM from ftp), now im afraid to manipulate
dodadent said:
[email protected]
Before i have bricked one wizard (wronlgy installed a chinese ROM from ftp), now im afraid to manipulate
Click to expand...
Click to collapse
We all have the same feeling if something went wrong. But there is no risk when you follow the user manual carefully. Please check your mail, I sent you already! Have fun!
nugift said:
We all have the same feeling if something went wrong. But there is no risk when you follow the user manual carefully. Please check your mail, I sent you already! Have fun!
Click to expand...
Click to collapse
Thnks man, a lot.
Everything is going OK.
Thnk you very much again.
hi everyone
i have imate k-jam. could i download rom 6.5 from this site.is it g3 or g4.
ipl 1.01 spl 1.06 gpm 01.01.10
radio version:01.01.10
You can if you wish to have a brick....
The K-Jam ISN'T a Hermes as far as I know...
k-jam is a WIZARD, go to WIZARD rom development section. also for any type of queries, post ur queries in wizard rom development section.
ipl 1.01 spl 1.06 gpm 01.01.10
radio version:01.01.10
how can i upgrade to 6.5 please help me
ultramag69 said:
You can if you wish to have a brick....
The K-Jam ISN'T a Hermes as far as I know...
Click to expand...
Click to collapse
what is brick how can i get it
rockonhell said:
what is brick how can i get it
Click to expand...
Click to collapse
A brick=paperweight
just flash something that doesn't belong on the hermes (like wrong radio, or rom built for different device), and POOF! you have yourself a nice fancy brick!
hi guys,
I don't currently have my Athena yet, but Midget_1990 sent me anSPL to work on and I've successfully (well, pretty damn sure I have) patched it to see your device as SuperCID and to accept unsigned code.
If anyone out there can get on IRC so we can try flashing the new SPL via pdocwrite then we can get somewhere, I'll need you to help me find what address the damn is stored at of course but that shouldn't take too long to do.
Cheers,
Olipro.
Ok, I have to ask, and look dumb...
What ARE the IPL and SPL ?
im ready...if you want
MSN: [email protected]
I am desperately in search to unbrick my ameo. So i am willing to test this. I send you pm with my messenger details. Or pls send back pm on how to contact you to test this.
Ok, here's an update:
Thanks to the co-operation of a rather friendly italian chap, I've found the blocksize and address of the SPL on the DoC, so now it's just a case of someone flashing my patched one via itsutils and then getting in touch with me to see if it really has flashed.
Olipro said:
Ok, here's an update:
Thanks to the co-operation of a rather friendly italian chap, I've found the blocksize and address of the SPL on the DoC, so now it's just a case of someone flashing my patched one via itsutils and then getting in touch with me to see if it really has flashed.
Click to expand...
Click to collapse
i'm ready to test
tnx
me too
My athena love crash test
OK, I'd quite like to look at the 1.10 SPL.
does anyone here have a 1.10 SPL on their Athena? dumping it is a very simple (and safe) process.
I have 1.06 for you if you want.
and any eta when we can download the spl to flash our cid locked devices?
rwijnhov said:
I have 1.06 for you if you want.
Click to expand...
Click to collapse
yeah, I'll take that too .
the more versions I can get hold of to have a play around with the better.
ETA? no idea.
ok pls tell me to get the 1.06 version to you. maybe you can contact me by msn my adress is in your pm box.
Olipro said:
OK, I'd quite like to look at the 1.10 SPL.
does anyone here have a 1.10 SPL on their Athena? dumping it is a very simple (and safe) process.
Click to expand...
Click to collapse
I have
ATHE100 (HTC X7500) Unbranded- no Operator
IPL - v1.00
SPL - v1.10 RP00
What do i need to do to get you the SPL?
My Athena and PC are yours whenever you want......
With the cooperation of a kind soul (and risk-taker) I have been able to get my SPL on their device and it works. we're home free boys
pls can you give us a download and instructions? I would realy like to unbrick my device. So if you could be so kind.
rwijnhov said:
pls can you give us a download and instructions? I would realy like to unbrick my device. So if you could be so kind.
Click to expand...
Click to collapse
your device can't be unbricked. you need access to Windows Mobile.
but i still have acces to boatloader and my device is still flashable it will only give me vendor id error. only problem is i can't get past second tmobile splash screen. So when I flash your spl I should be able to flash other rom afterwards I think?
nope, not at all.
However; consequently; I flashed my SPL to someone's Athena tonight who didn't have the device SuperCID'd and with it the WM6 ROM flashed. so it seems it works as I anticipated.
This means that it should be possible to flash an unlocked radio with it and remove your simlock for free
Super CID My Dopod U1000
I really couldnt believe that my dopod u1000 is going to be Super CID soon. I had amazed at Olipro's work when I had my Herms, now he is proving again that he is the best. All the best Olipro. Just made a donation for you buddy under name 'manugsv'
my herm100 stack on windows mobile after apgrading spl to 2.03
and i can't downgrade it......
can some one help me please!!!!
What have you done so far? Have you tried to hard reset it? Check the info in the wiki on how to flash via SD card etc. Lots of good info in there.
thank you sear..but the problem that my htc is flashed with wrong flash(htc diamond one) and i cant flash it and i can't downgrade the spl from 2.03 to 1.xx sorry for my bad english
May not be recoverable... ONLY FLASH ROMS FOR YOUR DEVICE.... Looks like you may have learnt this the hard way....
no luck with this phone..thank you for replay
choco_tn said:
my herm100 stack on windows mobile after apgrading spl to 2.03
and i can't downgrade it......
can some one help me please!!!!
Click to expand...
Click to collapse
i have this same problem and didn't find any solution
if we can contact Pof he may help us
You can try to PM him but remember, he's one of the oldest members of the Hermes forum and our older members keep upgrading their devices and leaving us.......
I have a Advantage X7501...
after i flash RUU_Athena_DOPODASIA_WWE_2.19.707.4_1.45.00.10_Ship.exe ROM without HARDSPL it keep stuck in the bootloader.
actually i want flash my ROM from 2.19.453.4 to RUU_Athena_DOPODASIA_WWE_2.19.707.4_1.45.00.10_Ship.exe. OMG T.T
I need to flash back it to 2.19.453.4 ?
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
I don't know what to do anymore... T.T please anyone can help?
sorry my english is bad...
My problem is the same.What going on with you problem.Are you fixed this.
My IPL and SPL is the same.
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
solution
please follow the MAC and MTTY solution provided in other threads.
after following that procedure, install any ROM with SPL 1.2.
u r done.
any one try this solution
ERMANO.ESTE said:
please follow the MAC and MTTY solution provided in other threads.
after following that procedure, install any ROM with SPL 1.2.
u r done.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=528259
Based on my experience, if there's still ATHE100 on the bootloader screen, there's no need to use the model id/wifi fix.
You just need to find the right official ROM for your device first (if not HardSPL)... if I'm not mistaken, X7501 CID is HTC_001 and not DOPOD01. Please try flash the device again with US official WM6 ROM version first as located here for X7501 : http://wiki.xda-developers.com/index.php?pagename=Athena_Upgrades
After your device is recovered, please make sure you HardSPL it first BEFORE flashing other ROMs.
Wish you all the best.