RC E100 not working on Topaz. - Touch Diamond2, Pure Accessories

Got the HTC RC E100 Remote Control Headset for christmas, I plugged it in and was scared because it didn't work.
Then I saw that I needed to instal the drivers, so I try'd and the setup said: "Drivers already installed on this phone" or something like that.
On my phone I got the error: "getdeviceinfo.exe error" Send Log or Don't send..
Can anyone help me? Searched the whole wide web for this but it seems there is not any solution..
Thanks!
-----------------
HTC Topaz
ROM: 2.16.404.1 (67041) NLD
Windows Mobile 6.5

Note:
- Your HTC device may require a driver for this audio accessory to function correctly. If you experience any problems, then please download the driver from here, once the driver is downloaded, the file name needs to be renamed to zip.
- RC E100 is not compatible with YC A100 Y cable or YC A200 multifunctional audio cable
http://i.expansys.com/i/drv/rcw100driver.zi
rename from .zi to .zip
See if that works

cmstackar said:
Note:
- Your HTC device may require a driver for this audio accessory to function correctly. If you experience any problems, then please download the driver from here, once the driver is downloaded, the file name needs to be renamed to zip.
- RC E100 is not compatible with YC A100 Y cable or YC A200 multifunctional audio cable
http://i.expansys.com/i/drv/rcw100driver.zi
rename from .zi to .zip
See if that works
Click to expand...
Click to collapse
I have already done this, but I try'd again and the same thing happens with the normal CD Drivers.
- I Attach the phone to my datacabel in ActiveSync mode.
- I Run the RC W100 Driver.exe
- Choose language English (I have a Dutch Phone)
- GetDeviceInfo.exe popup on my phone "Getdeviceinfo.exe is from an unknown publisher, do you like to run it?"
- I press "Yes"
- After a fiew seconds I get the following error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- On my phone there is an error about "There was a problem with Getdeviceinfo.exe" "U can let Microsoft know about this problem to send a logfile balblabla.."
And still my RC E100 is not recognised.

let the htc player be, i am using pocket player, and it works (except mute) quite good (on original, also on duttys leo rom r6). btw, i got the same message, when i want to install that cab.

misko903 said:
let the htc player be, i am using pocket player, and it works (except mute) quite good (on original, also on duttys leo rom r6). btw, i got the same message, when i want to install that cab.
Click to expand...
Click to collapse
Do you get a headphone icon in top of you're mobile?

robjeex said:
Do you get a headphone icon in top of you're mobile?
Click to expand...
Click to collapse
yes, it is present,

well, I don't get the icon so it is not recognised at all..

Related

Prophet "nitro rel0ad" [wm6.1][build 5.2.20759]

Modified Pv lamson edition,
4mb pp,
removed some apps,
some graphical improvments
some speed improves
new skin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
link:http://rapidshare.com/files/155402606/nitro_rel0ad.rar.html
enjoy
So beautyful
maxwellr said:
Modified Pv lamson edition,
4mb pp,
removed some apps,
some graphical improvments
some speed improves
new skin.
link:http://rapidshare.com/files/155402606/nitro_rel0ad.rar.html
enjoy
Click to expand...
Click to collapse
Dear maxwellr,
1. did you fix the "sleep dead" issue?
2. did you fix the "screen off while power on" issue?
3. did you fix the comm. manager "wifi " issue?
4. Lamson's rom, not bad~~~~~~~~
Very nice, i love this plugin.
But i wonder if all these lg buttons are working when we press them.
Thanx.
downloaded..flashed..
BelowItems that are not working when pressed. Gives a "System cannot find the path
specified" error message.
1) Under the Media Tab
- Camera
- Video Camera
- Fixed View
- Games
- Mobile Java
- FM Radio
2) MS Office Tab
- PSNote
3) Settings Tab
- Power Icon
- Bluetooth & USB Icon - nothing happens
Comm Manager OK so far. Wireless also ok.
FYI
hey, I hope it is fast as the original Nitro, thanks for this new build, I will test it
keep up the good work for our Prophets
i'm currently looking for a way to change the path of shortcuts so they work. But if i can't, i'll have to remove it for the next version.
please report any bug so that ones gonna download will be reported before downloading
anyone have alternate link for the file ? had problem dling with rapidshare
maxwellr said:
i'm currently looking for a way to change the path of shortcuts so they work. But if i can't, i'll have to remove it for the next version.
please report any bug so that ones gonna download will be reported before downloading
Click to expand...
Click to collapse
Hi, when I install some apps in the extended rom they didn't work. For example I try to install the Kevtetris and dind't work. In the original Nitro I don't have this problem.
Thanks for the ROM !!
By the way, may I know what software is it that puts the battery status (on top of the screen) as well as the launcher in your ROM ? It looks pretty cool...

[Q] Help with Android Powered CarPC

I have purchased a CarPC much like this one from China:
http://www.parkly.com.cn/Simplified/ProductView.asp?ID=148&SortID=146
All the "normal" functions (radio, calling, bluetooth, tv) are not android, but the GPS has been replaced with a Android 2.3 installation..
The problem here is that the Android installation is very minimal and does not include android market...
I would try to fix it myself, but i'm missing adb access.. Also, I can get into an update mode (recovery mode) but there are no physical buttons connected to the android system.. so I can't select anything, just getting the android icon with the triangle because no update exist..
There is a usb plug on the back of the radio, which is normally use for a WIFI stick.. I have tried to connect a usb keyboard, which works fine in normal mode, but no effect in recovery mode..
There is a small 10-pin plug in the lower right corner of the unit (see pictures), I suspect this to be a adb connection, but have no idea on howto create a cable for it...
The unit is based on the TCC8900-series.. So maybe someone out there has some ideas???
Hope someone can help me get ADB connection to this carpc...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does it has superuser permissions? If yes, you can try to install it recovery via Rom manager.
I think you can install android market without adb. Just grab android market and install it. (Not sure)
Maybe you can just make a story like tell them your android system won't boot up. Asked them how to fix it yourself. And just act like stupid, ask how to do this and that and I think they will tell you how to connect to pc.
Accidentally sent from my Nexus S using XDA Premium App
No root..
and I have already tried to contact them.. no go...
ADB does not require a special cable
Does the unit have WIFI on Android?
If so check what IP it is getting and connect to it via ADB, through another host connected to the same WIFI network (Like a PC/Laptop...):
> ADB CONNECT 192.168.X.Y
Thanks for the IP ADB suggestion, I will try it out.. But I still haven't got root..
Hello MrMEEE!!!
Any new with your device? I have the same one and the same problems! Plus, the 3G does not work with modem i provide (and I dont know which other I should). I turn the Wifi on, it keeps On for about 1 minute and then turns off by itself.
I have installed SuperUser.apk through the sdcard but ths SYSTEM partition where I should put the su binnaries is READONLY. When I try to use my "su" I receive the message "the uid 10039 is not allowed to su"
So, if you have any news, please let me know.
Regards

How do I disable this popup everytime I connect to a PC

Every time I connect to a PC my phone gets this pop up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is there a way to make it stop doing that every time I plug my phone into my computer?
Well, for starters do you have all those things that it is suggesting (SP3 for XP, Win Media Player 10+, Kies already installed)? Need more info
I'm assuming once you have all those you won't get the pop-up!? Not sure you can actually diable the message.
Olywa
That message shows up because your pc or Mac isn't recognizing the sgs3 as a valid mtp device. You will need to install wmp on windows xp (vista and 7 have native support) to get the message to go away. For macs, I'm not sure but there should be an equalivent
The pop up doesn't come if I have WMP open but I don't really want to open WMP every time I connect my device. I can transfer files and stuff flawlessly but its just a minor annoyance that I have to dismiss that pop up everytime I transfer files or charge from the PC. I'm on Windows 7 Ultimate 64bit
Does sound annoying - have you tried switching on USB debugging in the S3 Developers settings? Not sure if that would make a difference?
Olywa
Olywa123 said:
Does sound annoying - have you tried switching on USB debugging in the S3 Developers settings? Not sure if that would make a difference?
Olywa
Click to expand...
Click to collapse
I'll give that a shot now
Didn't work
WMP does not open when u connect the device, so you can upgrade WMP and hope the pop up disappears!
Sent from my GT-I9300 using xda premium
Jack_Random said:
WMP does not open when u connect the device, so you can upgrade WMP and hope the pop up disappears!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I already have the latest version of WMP
and you do have kies installed right? Sorry man, I'm out of ideas - hope someone else can help you with this.
Olywa
Olywa123 said:
and you do have kies installed right? Sorry man, I'm out of ideas - hope someone else can help you with this.
Olywa
Click to expand...
Click to collapse
I think I fixed it. It was a USB driver issue. I found drivers from Samsung and not whatever crap Windows installed by default.

[Q] Blue Screen when using AdbCommand copy from PC to Android using USB Port 3.0

SOLVED
HI, All
I have facing out weird problem. Why, when i using adb command to copy file from PC windows to android Devices using Port usb 3.0. Windows will be immediately Blue Screen. Note: in blue screen appears, Bluescreen: Physical Memory Dump
I using Windows 7 (Zotac CPU). But, when i using standart USB port in zotac. Will be running.
Anyone knows, why the problem appears?
Best regard
Solved problem
raditya gumay said:
HI, All
I have facing out weird problem. Why, when i using adb command to copy file from PC windows to android Devices using Port usb 3.0. Windows will be immediately Blue Screen. Note: in blue screen appears, Bluescreen: Physical Memory Dump
I using Windows 7 (Zotac CPU). But, when i using standart USB port in zotac. Will be running.
Anyone knows, why the problem appears?
Best regard
Click to expand...
Click to collapse
Hi, All
This problem is caused because driver in ZOTAC isnt installed properly. When you also facing out this problem. Please make sure your driver installed properly and all your hardware is in good condition.
Best regard
Android All In One Toolkit .. Data Transfer Via ADB
raditya gumay said:
Hi, All
This problem is caused because driver in ZOTAC isnt installed properly. When you also facing out this problem. Please make sure your driver installed properly and all your hardware is in good condition.
Best regard
Click to expand...
Click to collapse
Goood One...
Hii
I Developed an application named "Android All In One Toolkit" With Windows GUI...
1. Data Transfer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No Need to type single command
just put path in text box & Press Pull From Device button..
It has feature for fast data transfer over adb without mounting sd card...
It also has many more features that will make your workflow much easier..
Check out my Application
Thread : http://forum.xda-developers.com/showthread.php?t=2494319

Android (LG G6) won't connect as MTP to Macos (as ADB it does)

Hello everyone,
a) My guess is, it might a problem with the drivers. I installed some LG programes earlier, already deinstalled it... But, Maybe you know better how to renew the Android drivers on the Mac and get rid off the stuff which probably blocks me from having the file transfer function again.
b) do you know at least any other (free) Programe that uses ADB to connect the phone to Mac?
c) something I have not thought of... You tell me
Once it was possible to connect the phone to my Mac and transfer files with Android File Transfer. Now it is not. I tried several other programmes, none can connect to the phone via MTP (for file transfer).
When I chose not "data transfer" but "photo transfer" as an option in the phone, the Photo app on Mac opens and I could trnasfer photos - so it works!
But I need file transfer....
I have and try several cables. Phone works without any problems with windows.
The only thing works now for transfering files via cable is MacDroid, which can connect the phone via ADB insetad of MTP. --> Problem: it costs money (and why should it now work in MTP in the first place).
The phone generally is found by the computer:
View attachment 4950209
I use as OS "El Capitan". On the phone Android 9.0. Phone LG G6
Thank you!
PS: The phone even asks me if I want the Mac to authorize:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS2: Macdroid works with the phone even in MTP Mode when Debugging is deactivated. So what is this... I do not get it.
Guys, girls, anybody, please give me a hint, think with me, tell me where to look for answers ...
Finally... I knew it was some ****ty LG Software... I installed all the LG Software I could find on their website. Plus some dirver they provided. And THIS time, I deinstalled them using their own tool. Now it works again...
I think I had installed something earlier and then just deleted it or something.
So in short, it was necessary do install and UNINSTALL the LG drivers from their website.

Categories

Resources