Related
i was look for a good case with belt clip
so i bought the official htc case for P6500 on Htc/expansys site
and .. send it back
because it is nothing like it is on the picture
it is not a a belt clip case, it is some kind of "wallet case"
so i search and search....
the only cases that seems to feet is all the universal cases
but no one seems goog enouth
and seem to be imposible to find some horizontal belt clip case
so here is my find
http://www.noreve.com/category/PC+d...tui_cuir_universel_PDA_-_Large_Tradition.html
good quality
just a little large for the p6500, but good
i would like some case that feet the P6500 well , horizontal with belt clip
so until it comes out, this one will make the the job
so if some of you find something better, don't forget to share !
regard
Years ago compaq used to make an expandable fabric case for the 36xx ipaq. I still have mine and it fits the p6500 perfectly. I don't know if it's still possible to acquire it.
Ultimate Sedna Case
I purchased one of these babies a month ago for my new Sedna and LOVE IT!!!!!
http://www.pielframa.net/htc_p6500.asp
Picture shows a brown color case, but it's available in black
Made in Spain
Can't speak highly enough of the quality
Highly recommend
kwburress said:
I purchased one of these babies a month ago for my new Sedna and LOVE IT!!!!!
http://www.pielframa.net/htc_p6500.asp
Picture shows a brown color case, but it's available in black
Made in Spain
Can't speak highly enough of the quality
Highly recommend
Click to expand...
Click to collapse
The P6500 has a bit rounded backsight, so if u tap on the display the HTC waggles. Is this problem solved with the PielFrama?
axle7517 said:
i was look for a good case with belt clip
so i bought the official htc case for P6500 on Htc/expansys site
and .. send it back
Click to expand...
Click to collapse
So did I ... also bought/sent back numerous other cases that were either too big or just plain garbage
axle7517 said:
i would like some case that feet the P6500 well , horizontal with belt clip
so until it comes out, this one will make the the job
Click to expand...
Click to collapse
I finally found & bought one of these from PDAir
They do two or three of them but this one was what I was after, just something to carry it around & clip on me belt
I have one of the ones that kwburress wrote about and found it to be an excellent piece of workmanship, but, I also found that PDAir have some aluminium cases which are handy as well. Thanks to both Prospro and kwburress for their input...
http://www.otterbox.com/htc-cases/htc-p6500-cases/htc-p6500-defender-case/
we use the otterbox, it's great if you need a rugged case for ultimate protection.
I have one right now... but it's a cheap one from Ebay. When I first bought it, it fit real nice and tight but now over a month or two it's getting loose and slides around a bit.
Anyone have any suggestions? I'm looking for the following:
1. It doesn't expose the metal part of the camera on the back cover.
2. Fits snug on the phone indefinitely (is this possible?).
... and if possible one that isn't really sticky.
Thanks!
Silicon case!
I was bought one silicon case on HTC STORE http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=176956 and is great. Cost 20$.
hi, i have a clear one of these, think i would buy the grey next time. its also a cheap ebay item. its very snug, not as flexible (which makes removal a bit of an effort) and nowhere near as sticky as some silicon cases.
http://cgi.ebay.co.uk/Soft-Silicone...h=item110357833639&_trksid=p4634.c0.m14.l1262
hope this helps
Yeah i bought one of those that bl1nky recommended. The only thing i can say is that the fit around the bezel edge is not as good as other 'softer' silicon covers.
In my case particularly, the right hand edge is badly formed and seems to pull away from the HD bezel.
In addition i find that locating and using the power switch to be troublesome and it's this that i find most annoying.
My personal quest for the perfect case continues....
Thanks for the suggestions... I'm also in the search of a perfect case. You wouldn't think it would be this hard!
I am using this from boxwave. The fit is nice and not sticky. I went with the clear one.
http://www.boxwave.com/products/crystalslip/htc-touch-hd-crystalslip-case_3387.htm
900SS said:
I am using this from boxwave. The fit is nice and not sticky. I went with the clear one.
http://www.boxwave.com/products/crystalslip/htc-touch-hd-crystalslip-case_3387.htm
Click to expand...
Click to collapse
Looks pretty good, I just ordered one. Thanks!
cRaCKwHoRe said:
Looks pretty good, I just ordered one. Thanks!
Click to expand...
Click to collapse
Let us know how you get on, this looks like a good little case.
dashfield said:
Let us know how you get on, this looks like a good little case.
Click to expand...
Click to collapse
Will follow up when I get it then
cRaCKwHoRe said:
Looks pretty good, I just ordered one. Thanks!
Click to expand...
Click to collapse
good choice. its the best case IMO. the grey one is almoste invisible. really thin and it protect greatly the phone.
Looks great... may consider one!
http://cgi.ebay.co.uk/Soft-Silicone-Skin-Case-For-HTC-Touch-HD-Gray_W0QQitemZ110357833639QQcmdZViewItemQQptZPDA_Accessories?hash=item110357833639&_trksid=p4634.c0.m14.l1262
http://www.boxwave.com/products/crystalslip/htc-touch-hd-crystalslip-case_3387.htm
What is the difference between these 2?
dnbcat said:
http://cgi.ebay.co.uk/Soft-Silicone...h=item110357833639&_trksid=p4634.c0.m14.l1262
http://www.boxwave.com/products/crystalslip/htc-touch-hd-crystalslip-case_3387.htm
What is the difference between these 2?
Click to expand...
Click to collapse
They look the same from what I can tell in the pictures... but you never know on Ebay it could be a cheaper knock-off of the original. I don't know because I haven't purchased the one from Ebay. I will be getting mine today or tomorrow from Boxwave and I'll take some pics of it and stuff and update here.
Is it the non-transparent one with small camera hole? (I'm in the boarding shcool where ebay is locked) If so, it's good, but rather thick, good for protection, but will make your HD thicker (around 16mm). If not, just remove this post.
cRaCKwHoRe said:
Will follow up when I get it then
Click to expand...
Click to collapse
Ok so I got the case and have been using it for two days now. It is pretty damn nice actually. It fits well, not too tight and not too loose either. It's not sticky like the cheap Ebay one I have so I can easily slide it in and out of my pocket. I got the smoke color. It's clear and shiny so it suits the HD well. I like being able to see the phone through the case as well.
can try this silicon case from Capdase
CW any pics mate ??
i got the silicon case from ebay and its not a tight fit.come off very easily. am now on the hunt for another case. there is a case for the iphone which is a plastic case but a rubberised finish.
laidbackfreak said:
CW any pics mate ??
Click to expand...
Click to collapse
I have a crappy digicam but here are some. Sorry for the blur It doesn't like to focus up close...
cheers CW looks good, next question, do you use a car holder of any sorts ?
If so hows the fit ?
Does anyone know if Zagg's invisible shield or Bodyguardz' protective film for european Touch Pro 2 will fit ATT Tilt2? Thanks
I had a similar question. I have the EU version, unbranded, and am wondering if the form factor is the same as the AT&T model. The button placement on the front looks to be identical. Can you post a picture of your battery cover?
Here we go. Looks like EU TP2, except PTT button.
Thanks for the pics. You're right, it looks like my European model. I like the color of yours better though The form seems to be the same on the backside too. Hope someone can speak to your original question for you.
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
theskeels said:
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
Click to expand...
Click to collapse
That would be great! Anyway, i decided to experiment a little and ordered the full set from Bodyguardz. Will let you know as well how it works
I got a rubberized hard plastic shell designed for the European model and fits the Tilt 2 quite nicely. The only drawback is there is no cutout for the PTT button. Other than that I cannot find anything wrong with the European case being used with the Tilt 2.
Thanks for the info. That should indicate that on the outside at least the two shells are the same, with the exception of the PTT button anyway ( and maybe a forward facing camera on the EU model?). I'm thinking that the screen savers and clear vinyl "cases" will be mostly interchangeable between the two types as well.
Saw this posted on another forum. I don't have any experience with this brand myself, but looks familiar to the Zagg product and it is specifically for the Tilt2:
http://www.clearprotector.com/atandt-htc-tilt-2-extended-protector.html
If memory serves this is the company that I bought a similar case from for my Wizard. Thanks for the link. I've been using the case that came in my box and like it a lot. It's slim and provides sufficient protection. This protector should complement it well, and allow me to leave the phone out of the case while driving without having to worry so much about it sliding around and getting scratched up.
I just ordered one (extended protector), for my unbranded phone and will let you know what I think of it when I get it, as well as what they're customer service is like.
These cases can be tough to get on, and you have to accept the feel of the edges of the material when handling the device after installation. But they do provide a good grip to help prevent the slippery little buggers that our phones are from jumping out of your mitts. And the material is tough to say the least. Once they're on right, they stay put and do the job.
I just looked on the bodyguardz website and saw that they have a kit for the Tilt2 now. I should have it later this week. I will post updates once I put it on.
Don't mean to hijack......
Don't mean to hijack the thread but do any of you use either of these products with a leather pouch/sleeve like an EaseCase. I'm wondering if there will be any peeling issues when sliding the device in and out of the case.
Received the TP2 kit today, just applied it to the phone. Came out ok, but the only thing that doesn't match is the front camera hole, so I left the original protector on; and I had to cut off a small peice of protector from the side for the PTT button. Probably I will try another set from somebody else.
How did they work out?
theskeels said:
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
Click to expand...
Click to collapse
edskii said:
That would be great! Anyway, i decided to experiment a little and ordered the full set from Bodyguardz. Will let you know as well how it works
Click to expand...
Click to collapse
Did you guys have any success?
I just got a invisible shield for my tilt 2, just for the screen. It's designed for the OEM TP2, because mine had the tiny hole on the top right for the front facing camera, which the Tilt2 does not have. Other than that, perfect fit.
I like the new sponge that comes in the kit, easier to use than spraying the screen with the wetting agent.
For anyone interested in bodyguardz, now is a good time to order. They already include the 25% discount for Christmas and if you use coupon 155A6 you get another 20% off!!
p51d007 said:
I just got a invisible shield for my tilt 2, just for the screen. It's designed for the OEM TP2, because mine had the tiny hole on the top right for the front facing camera, which the Tilt2 does not have. Other than that, perfect fit.
I like the new sponge that comes in the kit, easier to use than spraying the screen with the wetting agent.
Click to expand...
Click to collapse
Does The Isheild cover the chrome painted rim around the screen? This is what gets damaged most readily (I Know I have dropped mine out of my pocket while ridding my bike on Highway 50 in Orlando, FL.).
Anyone please reply who has a Tilt2 & Zagg Isheild installed? Does it cover the chromium = )
No, it doesn't cover the chrome. For me the screen protector also didn't fit quite right. In the process of removing and reapplying it, I have now managed to stretch it out (which necessitated cutting around the speaker so I could hear) and got all sorts of fingerprints and whatnot under it, making it useless in sunlight.
Many of the major malls in the U.S. have "kiosks" that will do a custom install.
My buddy had his ENTIRE TP wrapped, including the chrome.
I wanted to make a new thread, but decided not to clutter the board and instead ask in a couple threads for some pictures. Can anyone with the Gadgetshieldz for the ATT Tilt 2 post some hi-res images so I can see what it looks like and how it fits around the corners and sides? Thanks
I used to have SEIDIO cases for my mogul and touch pro... but it seems they havent made one for the Touch pro 2 yet... i just got my TP2 today and ill give myself 1 week tops before i drop it So i need one badly!
So with that i want someone to recomend me a case like the ones SEIDIO makes... i like the rubber/plastic feel/construction and at the same time like that they use very thin/light material... any help is greatly appreciated!
This might help:
http://www.seidioonline.com/product-p/csr2htch2-bk.htm
http://www.seidioonline.com/Category-s/3589.htm
Me to!
Exactly what I'm waiting for as well - can't find yet for my month old Sprint TP2. Anybody finds similar I'd love to hear about it.
Hard Case definitely needed
I would like a hard case for my AT&T Tilt 2 (Touch Pro 2). If anyone has any information, please share it!
BUMP :s
Anyone?
Acrylic Case for Tilt 2 found
Check this out: http://www.wireless.att.com/cell-phone-service/cell-phone-details/?device=HTC+Tilt2&q_sku=sku4030272
click on the "compatible accessories tab"
Amazingly, AT&T is the first to offer a "naked acrylic case" for the Tilt 2. It sounds like a Seidio-type case, except the case has an attached screen protector. The photo is horrible and I don't know of any AT&T store that carries these cases so, someone will have to take the plunge for us to find out what they're like. If I decide to buy it, I will certainly post photos and a review here.
I picked up the clear case when I got my Tilt 2 this weekend. Local ATT store in California had it in stock. The case is by Case Mate. It is pretty nice. The thin plastic over the screen is not causing any problems, but it tends to stick to the screen, so you do get these little air bubbles in spots. I'm hoping that if I really clean the screen well that problem will go away. I'm getting a little grit under the screen at the edges. I don't know if that will be a problem.
It does not add much to the size of the phone, so I'm happy.
ThomD, can you post photos of the case? Also, I assume the case is two pieces, can you confirm? Is it possible to cut the screen cover part off and use an affixed screen cover?
Willl the ATT case fit my Sprint TP2?
Photos later today, if work isn't too busy.
The case is two pieces. With a dremel is should be easy to take out the screen protector part, it is very thin compared to the rest of the case.
If Sprint and ATT have the same button layout it should work for Sprint phones.
I have the sedio case for my Treo Pro that I bought from sprint and the sprint touch pro 2 fits in the case perfectly!!! I love that it faces inward and protects the screen.
o0adam0o said:
I used to have SEIDIO cases for my mogul and touch pro... but it seems they havent made one for the Touch pro 2 yet... i just got my TP2 today and ill give myself 1 week tops before i drop it So i need one badly!
Click to expand...
Click to collapse
About three weeks ago, SeidioOnline customer service advised me that they hope to have the spring clip holster for the TP2 available around the first week in November. We'll see . . .
touch pro 2 case
heres a web site that has a rubberized case for the tp2 . It says for CDMA device but you be the judge
http://www.eforcity.com/clipon-rubb...p-for-htc-touch-pro-2-black-chtctouccoc6.html
mr_mogul said:
heres a web site that has a rubberized case for the tp2 . It says for CDMA device but you be the judge
http://www.eforcity.com/clipon-rubb...p-for-htc-touch-pro-2-black-chtctouccoc6.html
Click to expand...
Click to collapse
Out of stock... geeze did u guys buy them al?
I'm just going to wait for the Seidio becuase no one else makes a holster that works with the case and keeps the screen facing in, protecting it. Well not that I know of. If there is another lmk.
I also like that they are making a dock station for it that will be compatible with the case.
I went to Pocket Solutions and bought their leather Prestige case for the VZW TP2...a touch of elegance and with the belt clip.
However, I, too, am waiting for the new cases from Seidio...just received their extended 1750 battery and like it very much!
Anthony
Looks like the Seidio Innocase Surface is now pre-orderable and offically ships on 11/9. Hopefully they'll have the holster to go with it by then as well and maybe even the cradle.
o0adam0o said:
I used to have SEIDIO cases for my mogul and touch pro... but it seems they havent made one for the Touch pro 2 yet... i just got my TP2 today and ill give myself 1 week tops before i drop it So i need one badly!
So with that i want someone to recomend me a case like the ones SEIDIO makes... i like the rubber/plastic feel/construction and at the same time like that they use very thin/light material... any help is greatly appreciated!
This might help:
[ rl]http://www.seidioonline.com/product-p/csr2htch2-bk.htm[/url]
http://www.seidioonline.com/Category-s/3589.htm
Click to expand...
Click to collapse
Think it to late... But i have two shield on my touch pro 2
First Shield- Zagg screen Reason i bought is because the plastic its made out of is starch proof, meaning if your key rub against your screen you wont see any of those ugly lines.
Second Case- I Bought Off Amazon.it exactly what Ur looking for, it come with a belt clip that can be remove at any time, it come with an extract peace that change the belt clip clip on part to a flat back give u the ability to slide the phone right into your pocket without that belt clip sticking out.
http://www.amazon.com/Lambskin-Leat..._1_6?ie=UTF8&s=wireless&qid=1256960998&sr=8-6
That how it look. Its worth the money. Also the belt clip turns into a stand like the one in this picture
http://ecx.images-amazon.com/images/I/31s-JPETdkL._SL500_AA280_.jpg
KB41786 said:
Check this out: http://www.wireless.att.com/cell-phone-service/cell-phone-details/?device=HTC+Tilt2&q_sku=sku4030272
click on the "compatible accessories tab"
Amazingly, AT&T is the first to offer a "naked acrylic case" for the Tilt 2. It sounds like a Seidio-type case, except the case has an attached screen protector. The photo is horrible and I don't know of any AT&T store that carries these cases so, someone will have to take the plunge for us to find out what they're like. If I decide to buy it, I will certainly post photos and a review here.
Click to expand...
Click to collapse
http://www.wireless.att.com/cell-phone-service/accessory-details/?q_sku=sku4060235
your link only took to the phone.... this goes right to the protector.
starscalling said:
http://www.wireless.att.com/cell-phone-service/accessory-details/?q_sku=sku4060235
your link only took to the phone.... this goes right to the protector.
Click to expand...
Click to collapse
I bought this clear case at a local AT&T business center. It's certainly enough that I don't feel like keeping the phone at home because I'm worried of the damage that might happen if I put it in a pocket..
I am not-so patiently awaiting the seidio case and clip for this phone however, as I loved the one for my original Tilt.
Seidio Case and holster - Nov. 9
http://www.seidioonline.com/product-p/bd2-hlcsr2htp2s-bk.htm
Anyone have any experience with a case from Ventev? I've never even heard of them, but looking at their site it seems they make a lot of products.
Anyways I found this http://www.tessco.com/products/displayProductInfo.do?sku=532148&eventPage=1.
Honestly never heard of them myself. The price looks like it may be on the high end for what it seems to be, but if it's good quality then it'd be worth it. If you get one, post back and let us know how it is. I have a cheap Ebay TPU case on the way for now but I'm keeping my eye out for a good one.
I havnt heard of that case series, im waiting for the Commuter Case by Otterbox.. Still hasnt been released.. :/
http://www.amzer.com/Amzer-TPU-Polycarbonate-Case-Grey-Black-for-LG-Optimus-G-E970-P95217.htm
Looks just like this one ?
Sent from my LG-E970 using Tapatalk 2
They do
They do look exactly the same expect for one is labeled by a brand and the other isn't lol.
WA_Bob said:
Honestly never heard of them myself. The price looks like it may be on the high end for what it seems to be, but if it's good quality then it'd be worth it. If you get one, post back and let us know how it is. I have a cheap Ebay TPU case on the way for now but I'm keeping my eye out for a good one.
Click to expand...
Click to collapse
Have you received your TPU case? I ordered one yesterday but I got an email today from the vendor saying that they just found out they wouldn't fit AT&T phones and they refunded me. Now I'm not seeing any TPU ones on ebay.
esron said:
Have you received your TPU case? I ordered one yesterday but I got an email today from the vendor saying that they just found out they wouldn't fit AT&T phones and they refunded me. Now I'm not seeing any TPU ones on ebay.
Click to expand...
Click to collapse
I ordered mine off eBay 2 days ago and got the same message, he also gave me a full refund. Time to start saving pennies for an otterbox!
esron said:
Have you received your TPU case? I ordered one yesterday but I got an email today from the vendor saying that they just found out they wouldn't fit AT&T phones and they refunded me. Now I'm not seeing any TPU ones on ebay.
Click to expand...
Click to collapse
VannMannE39 said:
I ordered mine off eBay 2 days ago and got the same message, he also gave me a full refund. Time to start saving pennies for an otterbox!
Click to expand...
Click to collapse
See this.... http://forum.xda-developers.com/showpost.php?p=34586587&postcount=4
adfurgerson said:
See this.... http://forum.xda-developers.com/showpost.php?p=34586587&postcount=4
Click to expand...
Click to collapse
Thanks, I saw that. I've had 2 piece cases on my other phones in the past (incipio, body glove) and I actually prefer the cheap TPU ones best. The cheap TPU ebay/amazon ones (like this: http://tinyurl.com/ct4ktzd) are really low profile, slide in and out of the pocket easily, are flexible yet firm enough to absorb shock from reasonably high drops and only cost like $3. Hopefully someone comes out with one for the OG soon. I might buy one of those ones you linked to in the meantime.
esron said:
Thanks, I saw that. I've had 2 piece cases on my other phones in the past (incipio, body glove) and I actually prefer the cheap TPU ones best. The cheap TPU ebay/amazon ones (like this: http://tinyurl.com/ct4ktzd) are really low profile, slide in and out of the pocket easily, are flexible yet firm enough to absorb shock from reasonably high drops and only cost like $3. Hopefully someone comes out with one for the OG soon. I might buy one of those ones you linked to in the meantime.
Click to expand...
Click to collapse
I like the casemete popcase except the rubber wears away like a pencil eraser.
http://www.amazon.com/Case-Mate-Case-Stand-Samsung-Galaxy/dp/B0057G0T5S
adfurgerson said:
I like the casemete popcase except the rubber wears away like a pencil eraser.
Click to expand...
Click to collapse
Dropped my phone this morning, no damage but I decided I couldn't wait around for a case I actually liked and ordered one of those foryourcell ones. I'll post some pictures and write up a little review when I receive it.
esron said:
Dropped my phone this morning, no damage but I decided I couldn't wait around for a case I actually liked and ordered one of those foryourcell ones. I'll post some pictures and write up a little review when I receive it.
Click to expand...
Click to collapse
I will be gone all week for work, so you will probably have yours first. Will look for your post.
Ventev Case
The case arrived and fits the AT&T LG Optimus G E970.
The case consists of 2 parts, a TPU case and a Polycarbonate back cover. The Polycarbonate back cover can be taken off and you can then just use the TPU case.
All buttons remain functional with the case even though the case covers them, and all of the ports and the camera remain functional and accessible.
I have no problem slipping in or taking the phone out of my pocket with the case on.
The case does add significant thickness and heft to the phone, but the case seems solid.
I should mention that I ordered the case from Amzer.com, but it looks identical, and has Ventev printed on the back Polycarbonate cover.
protecyon said:
The case arrived and fits the AT&T LG Optimus G E970.
The case consists of 2 parts, a TPU case and a Polycarbonate back cover. The Polycarbonate back cover can be taken off and you can then just use the TPU case.
All buttons remain functional with the case even though the case covers them, and all of the ports and the camera remain functional and accessible.
I have no problem slipping in or taking the phone out of my pocket with the case on.
The case does add significant thickness and heft to the phone, but the case seems solid.
I should mention that I ordered the case from Amzer.com, but it looks identical, and has Ventev printed on the back Polycarbonate cover.
Click to expand...
Click to collapse
Thanks for the info. Can you, please, check that there are cut outs for both mics (the top and the bottom)? Thanks.
ferganer said:
Thanks for the info. Can you, please, check that there are cut outs for both mics (the top and the bottom)? Thanks.
Click to expand...
Click to collapse
There are cutouts for both the bottom and top mics.
Can you please take some pictures when you have some free time? The only picture online is the one just showing the back.
What about power button notification light?
gsrrr said:
Can you please take some pictures when you have some free time? The only picture online is the one just showing the back.
Click to expand...
Click to collapse
Attached some pictures at the following link:
http://imgur.com/a/Jn2TF/embed#4
The quality isn't great, but it should give you an idea.
Let me know if you need something clearer and I'll get out my DSLR.
DeathmonkeyGTX said:
What about power button notification light?
Click to expand...
Click to collapse
The notification light gets covered up unfortunately.
Here's some crappy pictures. Only complaint is the tpu rubber part fits really tight. It was hard to get in and lifted up the corner of the screen protected. But took it straight from mailbox and put on phone, so maybe I should have let it warm up.
Thanks for the pictures, folks. I'll probably go ahead and get the Ventev case for now until Otterbox comes out If it does, of course).
So, from what I see, the Amzer and Ventev cases are identical, except for the logo on the back?