I can confirm that Bluetooth Dial-Up Networking (DUN) works after the 2.1 update using PDANet through my Sony VAIO on the Rogers Network.. yes! now I can fully take advantage of my 6GB data plan without wires!
Also, the PhoneBook Access Profile (PBAP) as well as pulling your recent calls list (not sure what profile that uses) works fine with Android 2.1 using my SE HBH-DS980 headset.
However, on an incoming call, the phone doesn't push the CallerID tag to the bluetooth device. The same goes for the MusicID tag when playing music. From my intuition, I don't think these 2 features require a specific bluetooth profile but will rather need to be implemented in the music or dialer applications to function. I'm not sure why SE is leaving this out on the 2.1 update as it is a huge selling feature for their MW600 headset. All SE phones powered by Symbian or part of the Walkman branding all had these features right out of the box, and the X1 running Windows Mobile had it as a 3rd party support (ie. smartwatchm). It would be nice if a developer can add these features for Android since SE won't.
It also doesn't have the Service Discovery Application Profile (SDAP) to be able to provide the list of available bluetooth services to the master device. This was tested using my SE X1a. So to actually find out what services are supported, you'll have to find out the hard way.
Can anyone tell me what other bluetooth profiles are available now?
Summary:
Confirmed Supported Bluetooth Profiles in 2.1 Update:
-Hands-free Profile (HFP)
-Headset Profile (HSP)
-Object Push Profile (OPP)
-Audio Video Remote Control Profile (AVCRP)
-Advanced Audio Distribution Profile (A2DP)
-PhoneBook Access Profile (PBAP)
Ok... i just found the supported bluetooth profiles in the X10
Advanced Audio Distribution Profile
Audio/Video Remote Control Profile
Generic Access Profile
Generic Object Exchange Profile
Handsfree Profile
Headset Profile
Object Push Profile
Phone Book Access Profile
Service Discovery Application Profile
Serial Port Emulation
Serial Port Profile
Source: http://developer.sonyericsson.com/cws/download/1/716/952/1284710360/DW-102192-X10_WP_6.pdf
i'm off to buy a gamepad now...
Ringtone over bluetooth
Hi there. i think this is a problem shared by many users:
i habe a Bluetooth Handfree, in this case, FIAT Blue&ME. When i connect for example a Nokia phone and the phone rings, the ring is transfered to the audio systems of the hands free. With my X10mini i hear only the default RING RING from the hands free :-(
Is there anyway to enable handfree transfer of the ringtone in Adroid?
there are persons that describe the same problem but not for android: for example at http://forum.xda-developers.com/showthread.php?t=634494
By the way also SMS messages cannot be transfered to my Hands free Blue&Me. Anyone have idea how to fix this?
I think a new application to solve ringtone transfer to handsfree would help ALOT of users.
Regards and thanks..
OpenWatch is an app that is downloadable from the Market that allows bluetooth devices (like SE MBW-200 Bluetooth watch with lcd screen) to receive call/SMS/alerts/music player controls/etc. It supports a couple of other devices as well.
see: http://www.smartmadsoft.com/
see: http://forum.xda-developers.com/showthread.php?t=554551
azian_advanced said:
I can confirm that Bluetooth Dial-Up Networking (DUN) works after the 2.1 update using PDANet through my Sony VAIO on the Rogers Network.. yes! now I can fully take advantage of my 6GB data plan without wires!
Also, the PhoneBook Access Profile (PBAP) as well as pulling your recent calls list (not sure what profile that uses) works fine with Android 2.1 using my SE HBH-DS980 headset.
However, on an incoming call, the phone doesn't push the CallerID tag to the bluetooth device. The same goes for the MusicID tag when playing music. From my intuition, I don't think these 2 features require a specific bluetooth profile but will rather need to be implemented in the music or dialer applications to function. I'm not sure why SE is leaving this out on the 2.1 update as it is a huge selling feature for their MW600 headset. All SE phones powered by Symbian or part of the Walkman branding all had these features right out of the box, and the X1 running Windows Mobile had it as a 3rd party support (ie. smartwatchm). It would be nice if a developer can add these features for Android since SE won't.
It also doesn't have the Service Discovery Application Profile (SDAP) to be able to provide the list of available bluetooth services to the master device. This was tested using my SE X1a. So to actually find out what services are supported, you'll have to find out the hard way.
Can anyone tell me what other bluetooth profiles are available now?
Summary:
Confirmed Supported Bluetooth Profiles in 2.1 Update:
-Hands-free Profile (HFP)
-Headset Profile (HSP)
-Object Push Profile (OPP)
-Audio Video Remote Control Profile (AVCRP)
-Advanced Audio Distribution Profile (A2DP)
-PhoneBook Access Profile (PBAP)
Click to expand...
Click to collapse
The "Audio Video Remote Control Profile (AVCRP)" is still at v1.0. We need a minimum of v1.3 to display track information on MW600.. :-(
I have a parrot asteroid and it supports Bluetooth tethering but it requires the PAN and DUN protocol i know on my old tp2 i was able to update the Bluetooth stack but on android i am not too sure. Is it possible to add dun and pan to the evo 3d and where would one start looking for the apk's or would it be more in the framework built into the rom or is it more a kernel thing? Or are we just screwed until HTC gives us different source code?
I'm having some problems with one app on my phone connecting to a bluetooth dongle. The app is torque, if it matters.
According to the devs there are issues with the bluetooth stack in my version of Android, and I wondering if anyone knows how to fix this. Apparantly, the 4.1.x implementation works, or at least there's a workaround for the problems with this one.
Any help would be appreciated! I need to read the error codes from my car...
I'm sure if the app dev can't fix it, we won't be able either
Could someone tell me why its impossible to find a universal Bluetooth patch for EXTERNAL usb Bluetooth dongles? One that will add the full Bluetooth feature to the devices "born" without build-in Bluetooth.
We are so many that bought these Android tablets thinking that we could just plug in a Bluetooth usb dongle - for why would that feature be missing in Android, bluetooth has been around for so many years even before anyone thought of android.
So why is this left out of the kernel, it should be as basic as Wi-Fi?
Come on XDA developers - make a universal driver, then get people to test it and add their devices to the list of working.
Doesn't bluetooth work in linux? And isn't Android based on linux?
So why is it so hard to make the driver/patch?
Or is it simply that most developers think that bluetooth is obsolete - So never mind?
With kind regards
JBJ
Connecting 2 Bluetooth devices at once to your android device and stream audio simultaneously for both of them.
combined audio device routing https://source.android.com/docs/core/audio/combined-audio-routing
in aosp source code page it is mentioned about ble audio supporting multiple audio sink devices.... https://developer.android.com/guide/topics/connectivity/ble-audio/overview
Is there any details on how to achieve this. Please help me on this
The feature is called Auracast. Not everything you'll find in the AOSP is implemented in your firmware. Apart from that this features needs Bluetooth 5.2.
WoKoschekk said:
The feature is called Auracast. Not everything you'll find in the AOSP is implemented in your firmware. Apart from that this features needs Bluetooth 5.2.
Click to expand...
Click to collapse
We are trying to build AOSP 12 in RPI4 and enable Dual audio Bluetooth is that possible is there any reference