my phone have fallen to the grownd and after that he showed me that the sd card is damaged and i have to format it...
after i tried to fomat it, its now shows me "blank sd card"- when i connect it to the pc its shows me that i must format it before connecting to the pc..
when i try to format the sd card its doing nothing...
what can i do? the card is dead?
plz help me
sdcards themselves are shock proof, have you tried to use it in a card reader on a pc?
i dont have one
then get one
Yeah, try and get a reader. I've put SD cards through the washer, then the drier, and I've dropped them and stood on them. I've even seen a guy drive over his camera by accident. (bog standard compact camera. camera was ruined, but the SD card was fine, and good as new). They can also survive dips in sea-water, although terminal corrosion can be an issue for that kind of thing. But they'll survive pretty much anything I've thrown at them.
Since the SD card is solid state, and this all happened because you dropped your phone, the unfortunate reality of the situation is that it is more likely that your phone is the problem rather than the SD card itself.
You need to find something else to test the SD card in - either another phone that takes SD cards (doesn't have to be a Hero), or a PC card reader. If the SD card works, the issue is almost certainly your phone.
Regards,
Dave
but i tried a different sd card on the phone and its worked fine...
the reader wont help me- i want to use the sd card on the hero...
try to repartition it in recovery.
thanks
thank you very much kendong2!
after partitioning again its working!
thanks fo the help,
Daniel.
Related
I'm just setting up my XDAII (actually a Dopod 696 which I re-ROMed to the latest O2 ROMs). Everything seems to be working fine. However, there is something odd about the "Storage Card" situation.
Even with the SD/MMC slot empty, my Settings/System/Memory/Storage Card applet reports that I have "Total storage card memory" of 14.57 MB. Where is this coming from?
Also, perhaps more worryingly, when I inserted an old SD card (reformatted 32MB one from my Treo 600), the system doesn't seem to "see" it anywhere.
Do any of you gurus out there know why this might be the case?
Thanks very much in advance for any information.
CM
By the way, when I try using Storage Mechanic, it "sees" the "ghost" Storage card, which it is not able to format, but doesn't "see" the real SD card that is inserted into the SD/MMC slot.
Wierd.
Anyone have any ideas?
CM
It's the spare 'flash' memory. When you put a MMC/SD card in you get an addition item in the dropdown list.
Duh. Thanks for the info. However, any ideas why it's not "seeing" my SD card? Do I need to format it in some special way?
AFAIK the card should be formatted as FAT. Don't know if you need to do it or even if it can be done on the PPC. I generally format mine on a laptop before I start.
Hmm. I've been doing the same. Format is FAT (no choice given really), and the notebook sees the SD without any problems. But the XDAII just doesn't seem to recognize it whenever I insert it.
Sigh. I hope it's just a problem with my SD card and not the slot...
CM
If anyone else has any ideas as to why my XDAII doesn't see my SD, do let me know. Thanks again.
What type of SD card is it?
If anyone else is using the same card on their XDAII without a preblem then you can put it down to your SD slot
Ah! .... You did say it was an 'old' 32MB one didn't you? Wonder if the XDAII only accepts SD cards with a certain speed (e.g. 2x, 10x, etc).
My 16MB [Don't laugh ] Toshiba SD card works fine in my XDA II. I haven't tried my 128MB Sandisk one yet.
I would certainly try borrowing a new SD card (any tech-savy friends?) to see if it is "visible" to the XDA II before concluding that the slot is bad. Also, a soft-reset with the card inserted might also help the device recognize it.
Or try the SD card in another XDA / Phone / Digi Cam / PC whatever.
Thanks to all for the comments. The old SD card works fine in my laptop and my Palm. Sigh. I'm going to go look for a new SD card tomorrow and just pray that it's some wierd quirk between this particular SD card and the XDA. I really hope it's not a problem with the SD slot on the XDA (actually a Dopod 696) as it's a nightmare to get things fixed/exchanged here in China.
CM
Had a similar problem a month or two back with a work mates XDA1. He bought an 128MB SD Card (some odd make) which worked fine on his PC but his XDA didn't see it! My Sandisk SD card worked in his XDA fine tho!
Hi,
I would like to format my micro SD card, but I don't know how to.
I know that there is an option that says " clear storage" but it is for internal storage only ? or can format as well the sd card?
I haven't any card reader on my pc, so I have no idea about how to do it from Hermes itself. .
REgards
Sniuk said:
Hi,
I would like to format my micro SD card, but I don't know how to.
I know that there is an option that says " clear storage" but it is for internal storage only ? or can format as well the sd card?
I haven't any card reader on my pc, so I have no idea about how to do it from Hermes itself. .
REgards
Click to expand...
Click to collapse
Keep your micro sd in card reader , you can format it only from pc.(buy one card reader)
if you want format micro sd from device , you need a 3d part application , but from pc is better.
Regards
Imdantes
The resco explorer, has a format storage card utility
I have done it already, and works fine.
pocket mechanic works well, also finds errors, cleans up, makes coffee etc
If you're on XP, just right go into disc management, find the card, right click, and choose format...likely a similar method on Vista, but I haven't used it.
No third party tools needed, etc.
Edit, oops my bad, I misread that you didn't have a card reader for the pc.
Another vote for Resco explorer btw, I couldn't live without it.
Well, I got 4GB Micro SD. Formatting (FAT32) done through PC but never been possible through Artemis by any of the softwares mentioned here. The SD works fine under windows, but I gatta take it out in every new ROM or Radio flashing. Is there any way to make it being seen by Artemis DOS system?
Thanks
problem with my 4gig micro sd
hey guys...
about this topic...
i have a problem..
i have a 4gig micro sd for dopod 838 pro..
i think.. i had a virus the problem is..
i can no longer see the storage card neither on my phone nor on my pc...
how can i get to format it?..
at first it was working just fine but all of a sudden i can no longer show the sd...
what can i do?..
pls. help...
salamat!!/thanks!!/arigto!!/
nio.elsinore said:
hey guys...
about this topic...
i have a problem..
i have a 4gig micro sd for dopod 838 pro..
i think.. i had a virus the problem is..
i can no longer see the storage card neither on my phone nor on my pc...
how can i get to format it?..
at first it was working just fine but all of a sudden i can no longer show the sd...
what can i do?..
pls. help...
salamat!!/thanks!!/arigto!!/
Click to expand...
Click to collapse
Delete the folder "MSMETADATA" on your storage card and do a soft reset and that should work
Unless of course the sd card has failed... I had one or two do that... All you have, if the pc won't recognise to format, is a lump of plastic.... You'll have to get a new one...
phone no longer recognizes sdhc card
Okay, guys I flashed my hermes this morning with this
http://rapidshare.com/files/2179382...1.255.1_102_6275_1.38.00.10_108_Ship.exe.html and now it no longer recognizes any of my micro sd nor my micro sdhc cards. They come up on the computer but not on the device. I even installed the sdhc.777 cab and it still doesn't work. Help please...
refuse2bstopped, try a different os... If that doesn't work you may have a broken or misaligned pin in your usb reader on the Hermes. It may also just be dirty or have some corrosion on it. If you want to clean it use a cotton bud and some isopropyl alcohol (surgical spirits). DON'T USE METHYLATED SPIRITS... It leaves a residue.
Cheers...
sir...
im just wondering if my mini sd is busted and it has no use anymore..
why can my camera still recognize that there is still a memory card installed in to my unit that its even asking me to either save the picture's towards my unit or mmc
im just wondering if it can still be recognized by my unit can i still fix it/format it so that i could use it again...??
i know your the expert on this that's why i thought of asking you this..
thanks for reading my msg'
I like to look at things step by step
1. SD card isn't recognised by Hermes - not even detected...
2. Camera detects it - did you try taking a few pictures and seeing if it actually wrote them to the card? I had a phone that registered the card but kept throwing up "sd card corrupt" every time I tried to use it.
3. Does a PC recognise the sd card when inserted into a card reader? If you don't have 1 I'd make this a priority to get, a friend of mine bought one off ebay for $5 AUD including postage...
If the pc recognises it maybe you should reformat it fat32. remember to backup any data first...
4. If the pc and camera have no problem then I'd start suspecting the Hermes... I have two sd cards so I have no problems testing but you may need to either get a smaller card - I use a 512 for flashing the os, or find someone who can lend you theirs to test. If the 2nd card reads then either the card is bung or the Hermes has a problem with it (incompatibility has been known to happen). Clean the card reader as best you can with isopropyl alcohol and a piece of cloth. There may be some type of corrosion or dust on the sd card reader contacts.
These are the steps I have taken to work out if the sd card or Hermes is a fault. Generally I find its the card (happened once to me and once to a friend).
Hope this helps...
Cheers...
Been through this. Very recently, actually. Like, last night.
I don't have a microSD reader and I found myself needing to reformat my microSD in my Hermes to FAT32. I was trying to do SD flashes. Long story.
Anyway, know what I did? I used WM5torage. As long as your ROM is functional and your SD card isn't wasted, activate WM5torage and have WinXP format your "USB Mass Storage Device" for you through My Computer. It only affects the SD card.
I mean, it worked for me.
sd 2gb
i have i sd 2gb card, my pc can see it and use it but only on fat format. i cant format fat32, i get an error(not able to complete). i cant see or use it at all on my phone. (the only selection i have to format (on my pc) is fat,fat32, default unit size)
please help, so i can use the card on my pc and phone
edit:i have searched and the only thing i saw was prog. to format sd, that prog let my pc to see the card, but lost the ability to see it in my phone. (sorry i dont remember what the prog was)
A very good (shareware) 3rd party programm comes from softwinter (storage tools)
rgs
If the PC picks it up, right click on the sd card and select format. Make sure its fat32 though. Easiest thing to do... NO 3rd party apps needed...
i guess i wasnt clear enough. my pc comes up with an error "not able to compleate" when i try to format my card in fat32 (that is when it is in my pc), but i can format fat (but thats no help for me). if i put the card in my device, it doesnt see it, so if i link my device to pc, pc doesnt see the card. so still cant format via pc.
i tried 3rd party as noted, as i thought, if my device cant see it the app cant see it.
thanks for trying, but still in the same boat.
it is a new card too, im woundering if i bought a bum card and i should return it for a new.
any suggestions welcome
Reboot pc then try again... I've had this happen too and a reboot seemed to fix the problem. Just a psychotic computer problem...Sometimes pcs can be..... TROUBLE..
Cheers...
i tried that again, still doesnt work. but i did see autoplay run this time, i think that may be my prob.. 2 progs. trying 2 run on the same source at the same time. now trying to find a way 2 shut it off (like i really need it anyway)
Hello,
Me and my co-workers have exactly the same Phone GT-i9100, we bought exactly the same Micro SDCard, to the same provider, and Im the only one that the phone is not recognizing the SDCard. This is what I get:
http://dl.dropbox.com/u/52817124/SC20120124-143033.png
We switched SDCards and again I´m the only on that the phone does not recognize the SDCard, and then I tried with an used one (4GB) my partner was using before and it worked, so Its not like my phone does not recognize ANY SDCards!!! So I dont understand how come the NEW 32SDCard is not working ONLY FOR.
Any help would be appreciated!!! Thanks in advance,
Does it work on your pc ... if not your card is probably dud
LSAMUELCF said:
Hello,
Me and my co-workers have exactly the same Phone GT-i9100, we bought exactly the same Micro SDCard, to the same provider, and Im the only one that the phone is not recognizing the SDCard. This is what I get:
http://dl.dropbox.com/u/52817124/SC20120124-143033.png
We switched SDCards and again I´m the only on that the phone does not recognize the SDCard, and then I tried with an used one (4GB) my partner was using before and it worked, so Its not like my phone does not recognize ANY SDCards!!! So I dont understand how come the NEW 32SDCard is not working ONLY FOR.
Any help would be appreciated!!! Thanks in advance,
Click to expand...
Click to collapse
May be trying this check list:
Mount SD card
Format SD cad>Mount SD Card
Format SD cad in the other phone or PC>Mount SD Card
Try Stability Test V2.3 in the other phone
Try SD Tools V2.4 in the other phone
Dust inside the SD socket?
Have you tried formatting in your phone?
Could be you got unlucky, and got a faulty card reader in your phone. But also possible the sd card just needs to be formatted.
What kind of sd card is it? And is it formatted already?
hgroove said:
May be trying this check list:
Mount SD card
Format SD cad>Mount SD Card
Format SD cad in the other phone or PC>Mount SD Card
Try Stability Test V2.3 in the other phone
Try SD Tools V2.4 in the other phone
Dust inside the SD socket?
Click to expand...
Click to collapse
It won´t Mount to the Phone, when I hit "Mount" it would keep on saying Mounting but it doesn´t... When I connect the phone (with the SDCard in it) to the PC the SDCard is not shown. However, it does if its in my friend´s phone.....
Im thinking it could be that my phone is rooted, unlike my friend´s. So I think I could take it back to its original ROM and try, if it doesnt work then take it to warranty cuz the SDcards work just fine in my other friend phone (which is the same one as mine, bought it together, same day, same company).
Its a: SanDisk MicroSDHC 32GB
ctomgee said:
Have you tried formatting in your phone?
Could be you got unlucky, and got a faulty card reader in your phone. But also possible the sd card just needs to be formatted.
What kind of sd card is it? And is it formatted already?
Click to expand...
Click to collapse
Yes it is formatted, did it twice in my friend´s phone. I dont think its an sd card problem, its more like a feature/option thing, which I dont get to see any solution but to flash back to stock rom the phone.
LSAMUELCF said:
Yes it is formatted, did it twice in my friend´s phone. I dont think its an sd card problem, its more like a feature/option thing, which I dont get to see any solution but to flash back to stock rom the phone.
Click to expand...
Click to collapse
Right; I mentioned the card as a POSSIBILITY, but that another possibility is that the card READER in your phone is jacked up. Root should NOT have any affect in your phone's ability to read an sd card. I have root on my phone, and it reads my class 10 16gb sd card just fine. But it may be worth it to try flashing back to stock to see if that helps. Otherwise, your only option left after that is warranty.
ctomgee said:
Right; I mentioned the card as a POSSIBILITY, but that another possibility is that the card READER in your phone is jacked up. Root should NOT have any affect in your phone's ability to read an sd card. I have root on my phone, and it reads my class 10 16gb sd card just fine. But it may be worth it to try flashing back to stock to see if that helps. Otherwise, your only option left after that is warranty.
Click to expand...
Click to collapse
The thing is that it can read a 4GB micro sd that my other friend was using before, thats why I think it has something to do with my phone not reading that specific type of SDCard for some reason. I think of going back to stock because Root is the only difference between mine and my friends phone/MicroSDCard.
I´ll let you guys know my results in case someone else finds the same problem.
LSAMUELCF said:
The thing is that it can read a 4GB micro sd that my other friend was using before, thats why I think it has something to do with my phone not reading that specific type of SDCard for some reason. I think of going back to stock because Root is the only difference between mine and my friends phone/MicroSDCard.
I´ll let you guys know my results in case someone else finds the same problem.
Click to expand...
Click to collapse
Sounds like it is having difficulty reading SDHC (High Capacity) cards. I think standard SD cards can get up to 8GB, so I'm betting your 4GB card is a standard micro SD, and not an SDHC. SDHC was created for 16 and 32GB.
LSAMUELCF said:
It won´t Mount to the Phone, when I hit "Mount" it would keep on saying Mounting but it doesn´t... When I connect the phone (with the SDCard in it) to the PC the SDCard is not shown. However, it does if its in my friend´s phone.....
Im thinking it could be that my phone is rooted, unlike my friend´s. So I think I could take it back to its original ROM and try, if it doesnt work then take it to warranty cuz the SDcards work just fine in my other friend phone (which is the same one as mine, bought it together, same day, same company).
Its a: SanDisk MicroSDHC 32GB
Click to expand...
Click to collapse
Ok discard software related problem:
1- Flash original ROM-Kernel and try,
2- Then discard hardware related problem(in the phone and the SD card side)
Phone side;apply an electronic spray cleaner in the socket an SD Card. Use an anti-static wrist strap
3- SD card side; use software tools i recommended before in several SD cards.
Just to let u guys know, it was a hardware problem. I had to get a new phone.
Thanks,
Sent from my GT-I9100 using xda premium
I got my Dell Streak second hand but the 16Gb card that came with it wasn't working. Not that the seller had mentioned it.
So, I've actually bought 2 16GB micro SD cards and both have had the same problem. The device recognises it upon first installation but when writing further data upon it, e.g. connecting it via USB or taking the micro SD card out and using an SD adapter, the files become corrupted. It doesn't matter what type of file it is, it all gets corruped and it says that the SD is damaged when the phone is trying to mount the SD card again.
This is the 3rd time it has happened so it's no coincidence.
My 4gb that I had in my previous XDA Orbit has been working fine ever since I got my Streak with no problems whatsoever.
Am I missing a driver for 16gb+ SD Cards?
EDIT- Just had a thought. I was transferring all my stuff from my previous card that was in my Streak to the new one, could this have caused any problems? I assumed you could transfer all SD data from one card to another and still have all the apps and data working?
EDIT x2- Had another thought! It seems like when things get put onto the root of the SD card, it causes corruption but when it gets put into a folder, it seems okay. Now this isn't a problem when the device writes things to the SD card- they get put into the appropriate folders, however I have never had this problem with the aforementioned 4gb card and always write pictures and movies onto the root of the SD card to view without any problems.
My old nokia was on its last legs, so I borrowed my sister's Smart 2 to use. I inserted my SIM card, and my micro SD card (which worked fine on my Nokia and on my PC). Things were working fine until I attempted to download something from the browser, but it told me that I had to have an SD card to do so. Which I found odd, considering there WAS one in there.
Now, I've checked and made sure I'm putting it in the right way, and I've even tried changing the format via my PC from FAT(default) to FAT32 and exFAT, to no avail. The main problem is that when I go into
Settings -> SD card and phone storage
with the SD card inserted into the phone I still get "Mount SD card - Insert and SD card for mounting" which is greyed out, as well as "Erase SD card". So for some reason it's still not picking it up. If it sheds any light on the problem, it's a 1gb SD card
Dreenar said:
My old nokia was on its last legs, so I borrowed my sister's Smart 2 to use. I inserted my SIM card, and my micro SD card (which worked fine on my Nokia and on my PC). Things were working fine until I attempted to download something from the browser, but it told me that I had to have an SD card to do so. Which I found odd, considering there WAS one in there.
Now, I've checked and made sure I'm putting it in the right way, and I've even tried changing the format via my PC from FAT(default) to FAT32 and exFAT, to no avail. The main problem is that when I go into
Settings -> SD card and phone storage
with the SD card inserted into the phone I still get "Mount SD card - Insert and SD card for mounting" which is greyed out, as well as "Erase SD card". So for some reason it's still not picking it up. If it sheds any light on the problem, it's a 1gb SD card
Click to expand...
Click to collapse
Okay... I don't have much experience with the Smart 2, but most Android phones work similarly. What you can try is, back up all the data you want to keep onto your computer, insert SD card into phone, and have the phone reformat it. If the phone does not recognize card, make sure the SD card slot works. You may have to unscrew phone and make sure all wires are connected. If the SD card works on your Nokia and PC, it should be fine. Also, make sure there is no dust or dirt in SD card slot. Hope this helps