Related
Anyone found a good car holder for the TyTN? I've looked through ebay and found a few and all of them have no charging/power connector. I don't know which one fits well. I'm looking for a good cheap holder with ot without a power connector. Any recommendations?
Try the Brodit range:
http://www.dsldevelopments.com
There's also a thread over at Modaco.com about their stuff:
http://www.modaco.com/index.php?showtopic=244140
Hope this helps.
That looks really good! But I can't afford to spend £40 on a holder. I went for a simple one from ebay for a fiver. I only use it when I go on long trips and use my tytn for satnav which is very seldom.
penyekz said:
That looks really good! But I can't afford to spend £40 on a holder. I went for a simple one from ebay for a fiver. I only use it when I go on long trips and use my tytn for satnav which is very seldom.
Click to expand...
Click to collapse
You could check out these links, they are from HTC Europe.
http://www.expansys.com/htc/p_htc_item.aspx?i=142066
http://www.expansys.com/htc/p_htc_i...www.expansys.com/htc/p_htc_item.aspx?i=142058
http://www.expansys.com/htc/p_htc_item.aspx?i=142059
Things to consider though is if on long journey the phone might need charging so make sure the mini usb has enough room for a car charger to be plugged in. I use the charger for Holux GPSlim 236 satnav receiver to charge both devices when in the car. The only other problem I had with my M2000 was when accelerating hard or going fast round corners the phone would be pulled out of the cradle in fact I tried loads of cradles so I'm hoping this smaller phone doesnt suffer the same problem otherwise it could be elastic band time again.
Looking at that cradle in the top link it looks like one of the bottom lugs will block access to the mini usb which is no good really. Oh well only one way to find out and thats go and buy it.
I bought one from a Vodafone shop. It's just known as a universal car holder. Cost a fiver and works great.
I can still access the mini usb and all buttons while it's fitted in there.
Hope this helps
I love using my hd to watch movies hooked up to aux input in my car,
I got one of these of ebay:
http://cgi.ebay.co.uk/NEW-CAR-CHARG....c0.m14&_trkparms=65:1|66:2|39:1|293:1|294:50
its already snapped!
I want something that allows you switch between horizontal/vertical and tilt funtion for tomtom and core player
I may try velcro stickers or maybe an air vent holder
any other ideas?
I have had 2 of these..they are absolutely rubbish, the insertion clip snapped both times. I have also tried another holder (universal one) and that turned out to rubbish too, I threw it away. Another time the suction disc came away from the arm. I have also tried my own custom made holder - I took a leather phone case and screwed it into the back of the arm attachment, that worked much better than the worthless gadgets of ebay. So save your money and forget buying from ebay, it maybe worth spending a bit more for a better quality item. And just yesterday I found my my xda orbit holder provided by O2 so using that for now which fits the Touch HD very well.
My side I buy that for my car Car Windshield Swivel Mount Dock for HTC Touch HD. At 5.60$ nobody can make better!
Work like a charm!
KaNiMziE
I had a universal jobby off ebay, that was a bit rubbish since where it clamped onto the phone it obscured the volume control buttons.
Ordered one of the HD specific designed ones and will see how that goes.
KaNiMziE said:
My side I buy that for my car Car Windshield Swivel Mount Dock for HTC Touch HD. At 5.60$ nobody can make better!
Work like a charm!
KaNiMziE
Click to expand...
Click to collapse
I've had two of these and on each occasion the clip broke, it's useless!
If anyone is still searching
I've got a magnetarm for my HD combined with a metalpad. Works fine and you can rotate your pda in any order.
http://www.amazon.de/MAGNET-HALTERUNG-T-Mobile-Compact-Autohalterung/dp/B000RXZUPA
I will mounting this one Car Portable Device/Gadget Holder and Windshield Mount
and after then when I use it, I tell you
laguna33p said:
I've had two of these and on each occasion the clip broke, it's useless!
Click to expand...
Click to collapse
I have it for 3 weeks now and no trouble at all, very fast delivery and safe, only 2 weeks at my door....
KaNiMziE
http://forum.xda-developers.com/showthread.php?t=533649
Brodit holder + charger
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Pro Clip makes some amazing solutions. I have used them for years on numerous devices.
Balthazar81 said:
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Click to expand...
Click to collapse
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
DontHate said:
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
Click to expand...
Click to collapse
Goes pretty fast. Haven't done any comparison, but I can't complain. I normally drive 45 minutes to work and twice a day charging is fine for me.
Balthazar81 said:
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Click to expand...
Click to collapse
got one as well it pricey but well worth it
mrobo said:
I will mounting this one Car Portable Device/Gadget Holder and Windshield Mount
and after then when I use it, I tell you
Click to expand...
Click to collapse
I like the look of the solid mount to the screen, but the holder looks a bit busy.
How have you found it?
Paul.
I got my own here www.mobilefun.co.uk
In this page you can find just about everything you need for your touch hd or any other phone... Bad thing deliveries are done only within the EU countries
The link for the holder i personally purchased and i'm 100% satisfied is here:
http://www.mobilefun.co.uk/htc-touch-hd-car-holder-p19992.htm
If you are looking for something a lot cheaper that goes with a car charger in the pack you can look here:
http://www.mobilefun.co.uk/drivesafe-car-pack-for-the-htc-touch-hd-p20932.htm (only difference with the first one is a little more stiff on adjusting method) but its still perfect and safe & both are really easy to adjust horizontally and vertically the phone & they are both built for windshields which means you can video type your driving
I suggest it without second thoughts!
DontHate said:
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
Click to expand...
Click to collapse
Got the same one. Pricey but oh so worth it. I love it,and would def recommend it. I've tried the suction ones, and they for some reason keep falling off the windscreen, even with cleaning the surface/drying it etc.
The brodit just clips into your dash, and fit your touch hd perfect. They make mounts for every car.
I love it!!!
And it charges at a normal rate, just like a standard wall charger.
I have this one and it's excellent..
Brodit holder question
I have a cheap universal effort I bought from some motorway services - Im looking for a better solution - im using airvent attachment - its a three pronged affair which clips over one of the vent "stays". Its wobbly as hell - which is fine most of the time, except when you are attaching the charging cable. Does the Brodit attach to the airvents ? if so does it attach solidly ? in a better way than my three pronged clip ??
Depending on your car and which mount you want.
For my Xantia, using the vent beside the steering wheel the mounting plate fits in around the vent, between the vent unit and the dashboard body, rather than the cheapo ones that clip feebly to the vent.
At the moment I'm using two of the suction cup ones that people have had problems with.
Superglue is your friend (no, do not superglue it to the windscreen no matter how temping that sounds!).
The internal flange which holds the silicon cup to the base of the arm breaks up causing it to regularly fall off teh windscreen, some good superglue carefully dripped in fixes this. The other problem I've had is the ends breaking where the metal snake fits in, again superglue (pull back the concertina cover) in each end sorts this.
Ok these are things that should not go wong in a good product, but when they're available for a couple of quid shipped from China, it's to be expected, and thankfully easily rectified.
Has anyone got the details of a UK supplier of Brodit?
First let me make it clear...
This is strictly a recomendation for fellow Note owners.
I do not have anything to do with sales or anything near..
Wanted to share good stuff for as I really truly find these to be awesome.!
I just received (2) of these from AMAZON. Only $15 bux a pop. Ya Cant Beat It!
http://www.amazon.com/gp/product/B006L9K16W/ref=oh_o00_s00_i00_details
Dual USB / AC Plug Desktoop Charger.
Charges via AC while SYNCS USB (leave single or both jacks plugged in)
Bothwork together. Comes w/AC Adapter. Cradle has built in USB cable (so cant lose it!)
Very tiny footprint. Fairly Sturdy. Phone does not tip over.
I actually place one in the ashtray dashboard of my car (wired USB)
Easy feel ... for locking phone on and off of cradle (thats important!!! )
They are the most ALTERNATIVE affordable pricing compared to the OEM desktop chargers which in my opinion are not that good and are about $50 bux or so.
Support Car / Home docking software when phone docked.
Only Con is...BRIGHHHHHTTT blue LED light. Extremely bright.
Had to place a piece of black tape over LED
Thought I would share the 411.
Its hard to find a good alternative these days.....
Thanks for sharing this, just ordered two alongside the OEM Sammy car mount.
Thanks for sharing! Just ordered mine.
How quick does it charge?
Thanks for the tip. Just ordered one that I want to use to make a custom dock that I can fit in my cup holder in my car, as this phone is too big for my cup holders and that's where I like to keep my phone when driving. Was looking for a good/cheap dock, so thanks again for reporting back on the quality of this one. Definitely a nice price. Free shipping with amazon prime too.
how snug fit it is on the back? is there any room for the case? Will it fit if I have a thin case on?
I see that they also have the one with spare battery charger for $2 more. Interesting.
Hmmm you could probably MHL output while also USB host moding a keyboard/ mouse with this. Gonna buy one to give it a shot
Does it fit when i have a TPU case?
Actually the Samsung OEM dock is great. It's $40 at the ATT store. But I paid $20 with my premiere account.
I bought another on ebay as a back up, but haven't received it yet from here:
http://www.ebay.com/itm/220923137856?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_3363wt_1270
This does not actually come with the charger does it? \ Igt says can be used with charger that came with note.
Im confused. \/
so sorry for the delayed response! yes this desktop charger comes with one ac adapter in addition to a usb cable that is a cable built into the charger itself.
it allows you to keep the phone plugged into to both pc & ac wall at the same time with out the need to switch cables
it has a overload protection so no fear of charging burnouts.
it is definetely a snug tight fit onto the cradle itself. never worries about falling over or lose connections. i can say it works super super tight . real happy w/purchase.
Sent from my SAMSUNG-SGH-I717 using da premium
I need a desktop dock and a car dock for my Evo 3D. Any suggestions for a good and cheap dock?
Is there a dock that you can put the phone in and it will charge the phone and also have an audio output on the dock? I don't know if this is possible but if there is one I would like to get it. That way I could connect (and leave connected) some speakers (or the car's aux input) to an audio output on the dock. So I could just drop the phone into the dock and it would charge plus the audio would already be hooked up.
If this isn't possible then I guess just a good desktop and car dock suggestion for cheap (that charge the phone) and will fit with a kickstand case.
Dunno about cheap, look around on pricing, but Kidigi do both a car dock and a desk dock (No idea about the audio bit).
http://www.ebay.co.uk/itm/NEW-CAR-HOLDER-MOUNT-CHARGER-HTC-EVO-3D-/110729003340
I use this, perfect for me
THISIS50.com if its hot its here
I use the Seidio dock at work and at home. It doesn't have an audio out that I know of, but it works great with my case (also made by Seidio - I'm not sure if you'll have success with a non-Seidio case). If you don't have a case it will work fine, also.
Not sure about a car dock but I know there are several options out there.
http://www.ebay.co.uk/itm/NEW-CAR-HOLDER-MOUNT-CHARGER-HTC-EVO-3D-/110729003340
I use this, perfect for me
THISIS50.com if its hot its here
Click to expand...
Click to collapse
How does this work ? Does it use the cigarette lighter as the support ?
Sent from my 3vo using XDA.
jamieunit said:
http://www.ebay.co.uk/itm/NEW-CAR-HOLDER-MOUNT-CHARGER-HTC-EVO-3D-/110729003340
I use this, perfect for me
THISIS50.com if its hot its here
Click to expand...
Click to collapse
Pretty cool, I might actually consider this for my car.
Thanks.
bagelicious said:
I use the Seidio dock at work and at home. It doesn't have an audio out that I know of, but it works great with my case (also made by Seidio - I'm not sure if you'll have success with a non-Seidio case). If you don't have a case it will work fine, also.
Not sure about a car dock but I know there are several options out there.
Click to expand...
Click to collapse
As for home, do you have a link for this Seidio dock? I too have a Seidio case and would like a dock that will work with it.
Hopefully this will work ok. Sending from my phone so it might be wonky:
Seidio Desktop Charging Cradle
Edit: Fixed broken link from my phone.
Sent from my Shooter using xda premium
Aersaud said:
How does this work ? Does it use the cigarette lighter as the support ?
Click to expand...
Click to collapse
Sorry bit delayed but yeah it uses the cig lighter for support pretty good, I've got a really stiff head phone jack plugged in so it pulls it a bit and made it a bit loose so rapped some tape round the joint, good for the price.
THISIS50.com if its hot its here
For me the best dock for Evo 3d Is:
http://www.am**on.co.uk/KiDiGi-HDMI...3?s=electronics&ie=UTF8&qid=1327919543&sr=1-3
there is also a Hdmi port!!!
Ins90 said:
For me the best dock for Evo 3d Is:
http://www.am**on.co.uk/KiDiGi-HDMI...3?s=electronics&ie=UTF8&qid=1327919543&sr=1-3
there is also a Hdmi port!!!
Click to expand...
Click to collapse
The link isn't working.
I figured it out, it's:
http://www.amazon.co.uk/KiDiGi-HDMI...3?s=electronics&ie=UTF8&qid=1327919543&sr=1-3
Thanks
Fitting Car Dock in Germany
Hey Guys,
as I am not allowed to post in the Developer Forum yet,
which slowly get's on my nerves (but I get the reasons for it),
I finally found something to post somewhere else that is not completely meaningless.
Does anybody know where to get one of those "good" car mounts in Germany???
I am looking for something like Kidigi Car Mount Cradle CM-HE3D, iGrip perfectFit Vehicle mount or the Seidio one.
I want something with USB pass-through so I just have to put the Evo in.
Even better if the Camera is not obscured.
The Kidigi one is my favorite. Unfortunately the official reseller cjdirect.de seems not to have it yet (i will call them next week).
Only other way for me would be form the US or HongKong which I wouldn't prefer for reasons like tax, delivery time and so on.
I found it on Amazon.fr for 25 Euro but they won't deliver to Germany.
Then I found it in another French shop where they want 41 Euro because of delivery.
The Seido Innotraveler is available on amazon.co.uk für 37 Euro but I don't like the looks so much.
The iGrip I coulnd't finde at all (in Europe).
So if anyone could help me out and suggest something I would really appreciate it. Else, I guess I will call cjdirect and maybe order one from Hong Kong or France.
Nearly forgot, of course i know about the official HTC car kit but I don't like that either, and for 40 Euro I would rather pay 1 Euro more for Kidigi one or go to Hong Kong. Same with the one from Brodit. Just too expensive.
Thanks
I use this one for my HD2 but with a different mounting part. I dont know whether both cameras are uncovered. http://www.ebay.de/itm/KFZ-Halter-H...alterungen&hash=item3f0facce90#ht_2721wt_1113
Dnst said:
I use this one for my HD2 but with a different mounting part. I dont know whether both cameras are uncovered. ...
Click to expand...
Click to collapse
Thank you. Looks good but is not quite what i was hoping for.
I don't want to handle any cables when I want to load my phone in the car.
As I could'nt find anything else either I guess I just order the Kidigi mount through ebay from Hong Kong.
Ok, as I am really interested in a good car kit, too, maybe you could share your experience here when you have received the product. I am currently preferring this one http://www.pdamax.de/Zubehoer/HTC/EVO-3D/Kfz-Kit-CU-S520-Halterung-Ladekabel,hz-620:338.html or I will just buy a new cradle and put it on my existing model but it seems the major problem with most of the kits is the cameras not having free sight.
This is the official dock by HTC and due to the camera being obscured and
the high price I decided against it.
I will report about the KiDiGi dock as soon as I receive it.
It is on it's way already but tracking with DHL doesn't work yet (if at all).
have you look at the iGrip car dock?
Yes, thes iGrip dock would have been my second choice.
It has the best reviews of all but as it didn't matter
to me if I order from HongKong or the US I chose Kidigi
for it's looks and it's price.
I also found some reviews about the Kidigi docks for the Desire (I guess), here in the xda forum.
Were quite good too.
For all who are interested, you maybe want to checkout amazon.co.uk
for the Seidio Evo 3D Innotraveler Car Dock (not allowed to post links yet)
High Price but would have been my third choice, still better than HTC one because Camera should be free.
You need credit card though, same as in France for Kidigi.
Choose wisely
Anyone used both the iGrip and HTC car dock? I'd like to know which seems more solid. The obscured cameras don't really matter to me on the HTC one because there's a 99.99% chance I won't be snapping pics while driving.
As far as desk docks, I found this. OEM FTW.
http://www.amazon.com/dp/B005CK2APQ/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my PG86100 using XDA
You can find articles comparing HTC and igrip docks. HTC seems more solid, less vibrations, according to them.am on my phone, you can find them through Google.
and the camera is not only for taking pictures, which shouldn't be done too frequently , but for example for navigon reality scanner.
how much vibration come purely down to what mounting solution you use, if you choose a low vibration mount or vehicle specific mount any dock can be rock solid, I have the iGrip but I do not use the included suction mount as I hate having it on the windshield, I use a dash friction pad with a different suction mount that allow me to have it sit in between the instructment panel and the GPS LCD on my RDX, if I use it in my Mazda6 I have a Proclip vehicle specific mount (VSM) and that's super rock solid. I don't know about the HTC, but the iGrip Dock use the Herbert Richter (HR) 4 prong mount system so can use any mount that support the HR system or get a adopter plate, that's what I use in my Mazda with the Proclip, screw the plate onto the VSM and off i go, and if my wife want to use a dock on for her iphone its easy to swap also.
So I recently picked up some USB cables but, I found they are a little loose. The best cable that I have used is the one that comes with the Nexus 6 and presumable their similar flagships. I'm a big fan of how tightly it plugs into both ends. Anyway, I was wondering if anyone knew where I could pick some up (cable only) or a similar option that makes a nice tight connection with the device and type A port because, the aukey ones I bought are a bit loose fitting on both ends.
I love these. The detents on the plug give a satisfying dull thump when I insert it into my phone, and they lock firmly. They look great too. It's a shame they'll be pretty much useless next fall when I move on to my next phone which will most certainly be USB-C.
smile.amazon.com/gp/product/B00SUX3XQC?psc=1&redirect=true&ref_=oh_aui_search_detailpage
I use these ones from Amazon exclusivley now:
http://www.amazon.com/AmazonBasics-Micro-USB-USB-Cable-Meters/dp/B00C28L5UW
I use Anker cables. Probably the best I've ever used.