Related
Hi there!
I didn't put a screen protector on my TD2 -and over time it has become more scratched than expected. I'd like to replace the front display -I guess that is the one called the digitizer, or?
http://cgi.ebay.com/Touch-Screen-Di...wItemQQptZPDA_Accessories?hash=item4837633bd0
What are the chances for getting an original HTC at ebay?
Did anybody do this replacement with success?
Cheers
No one?
check this out too!!!
more expensive and not a word about oem product!!!
So... oem digitizer with just 19$ .... hmmmm! don't know!!!!
Perhaps this guide can help you.
Hopefully it's not permanently attached to the LCD like the ATT Fuze is. I took my Fuze apart and destroyed the LCD while trying to install a new digitizer. Apparently they use some sort of extremely strong glue between the digitizer and LCD...
Hopefully not.. But I think it's only glued to the frame.. I don't really know what kind of glue to use for the new one though...
ren28 said:
Hopefully it's not permanently attached to the LCD like the ATT Fuze is. I took my Fuze apart and destroyed the LCD while trying to install a new digitizer. Apparently they use some sort of extremely strong glue between the digitizer and LCD...
Click to expand...
Click to collapse
Sorry to tell you all that the Digitizer is permanently attached with LCD. I know this because I was drop my D2 and went to service center. They change to front cover (case) which was broken when droped. when I get it back they give me back my old front cover and I notice that the digitizer is stick with over part.....
When I ask the service's counter. They told me that they have to change the new digitizer because it come with whole part.. not saparated.
Sorry for my english....
Hi Guide144, you say that when you got the digitizer back it sticked with the 'over part'. To my ears that sounds like the FRAME and not the LCD? Are you sure that it's also attached to the LCD?
niknik76 said:
Hi Guide144, you say that when you got the digitizer back it sticked with the 'over part'. To my ears that sounds like the FRAME and not the LCD? Are you sure that it's also attached to the LCD?
Click to expand...
Click to collapse
Sorry for lag of my understanding, Yes the digitizer is stick with front frame, not a LCD. In my case, I ask the service to change my front cover because it broke and they change the front cover + digitizer.... because it stick together.
Hope this would clear all out.
Hi guys,
i replaced today the broken digitizer of my topaz.
Got one for $60 from ebay, with a screen (i wasn't sure if it was a screen problem or digitizer so i got both.)
you need to unstick the old one from the housing and attach the new one. i didn't use extra glue/stick , since the old one was left on the casing.
cheers
Thanks mistral82cy! Thanks for sharing -now I feel a little more up to going ahead with the operation
Hi! Could you please tell me how much the service center charged you to get the new cover and digitizer installed?
I've to change mine, as well!
Thanks a lot
I would suggest finding the parts list for the phone and finding out exactly what digitizer is needed then buy one online from somewhere such as e-bay. I did this with my G1 replaced it myself and it worked wonderfully. Research before you buy otherwise you might end up buying the wrong one or a clone which doesnt work as well
I dun it myself, buying one digitizer from ebay, getting the old one out was a little tricky , but appart from that it was easy(and i had to do it again, as i dit not secure it properly and there was dust comming underneath the screen from the sides. Any questions you could ask, but it is pretty straight forward.
pistonripper changed his housing, so he would have also replaced his digitizer, so you might want to check with him
http://forum.xda-developers.com/showthread.php?t=572728
If you want to buy one, this would be a good choice
http://cnn.cn/shop/touch-diamond2-digitizer-p-6733.html
replace digitizer on your own!
Hello everyone!
My digitizer broke last week, because i droped my Diamond!
But don't worry I am a rookie in technical things and I managed it to replace my digitizer on my own.
Don't waste money on repair charge from repairshops! Ok... you loose your garantie but the Cellphone is allready old. The new HD2 is already available!
Just buy the digitizerscreen at ebay... i've paid 60 € and then use this manual:
http://www.pdacenter.ru/razborka/htc-touch-diamond2/
Now it works like before.
Bye Ghostina
HTC Pure Digitizer or LCD
i just got my new AT&T HTC Pure and somehow my screen is cracked. The LCD does not appear to have any bleeding or damage and the touch features work, but I have two cracks from top to bottom on my phone. what are your thoughts. I attached some pictures
darkside896 said:
i just got my new AT&T HTC Pure and somehow my screen is cracked. The LCD does not appear to have any bleeding or damage and the touch features work, but I have two cracks from top to bottom on my phone. what are your thoughts. I attached some pictures
Click to expand...
Click to collapse
It's a bit hard to see on the photos but if its new can you not return it? if not then you need to look closely between the digitizer and the screen and see if the damage is just the top layer or the screen, if it is the top layer then just replace your digitizer!
spammer said:
It is easy to do it, if you need, I can send you the instruction that how to change it to you. You can visit my website --spam-- for this product Touch Screen Digitizer For HTC Touch Diamond 2 II T5353
Hope that it will help you.
thanks
Click to expand...
Click to collapse
Every single post of yours is a website promotion.
Chill.
Out.
Seriously.
As always this site is a big help. Just ordered the items, and thanks to the guide I'm fairly confident I will pull it off. For me the bottom 2cm's of the screen have shifted about 1cm to the left somehow. The digitizer still works "perfectly" but it's kinda hard to hit the right buttons like that
I can't find any info on this, but it looks like it could be tricky to replace. I cracked my glass by dropping it onto stone, still works OK. You can pick up digitisers pretty cheap on ebay (£20 UK) but does anyone know how to replace? I read that they can be glued to the LCD?
Thanks
Google for the fixit website, if someone has done it there will be a tutorial, or you could follow the guide on here to upgrade your sd card....only because you have to take the phone fully apart. You need to check if the lcd is glued or like the iphone 4 resin. If they are a sealed unit you'd be better off getting the lcd/digitizer combo on ebay. trying to separate an lcd from the digitizer is asking for trouble imho.
I have ordered a digitiser, really hope the digitiser is not glued to the LCD, there is a big price difference. I'll let you know how I get on.
I bought a Mozart with wrecked digitizer and also want to repair it. The digitizer is on its way, so in a week i could tell you how difficult or maybe easy it is.
If you are faster, please post your experience.
I found this thread on xda.cn, and it seems that the lcd isnt glued on the digitizer, so lets hope so
hxxp://xxx.xda.cn/newshow.php?snid=2167
EDIT: sorry cantpost links, so must change the x's to t's and w's
I have got my digitiser now, looks brand new. Just need to find the time to replace, might upgrade the SD card at the same time.
Done
I did this with Andy's guide to help: http://lifeinthefastlaneok.wordpres...-7-mozart-sd-card-memory-upgrade/#comment-225
I used this guide to replace my digitiser (the glass) which I smashed. The good news is that the digitiser is not stuck to the LCD at all. I just bought a grade A digitiser off ebay for £20 which was pretty much perfect - glass was perfect with a couple of small marks on the back case, but basically like new.
There were a couple of differences to this guide:
- Had to replace a speaker type thing at the top of the digitiser that was not present on the new one. Came off quite easily, just stuck in.
- Had to remove the USB port of the old case back (if you are replacing that too) but that was just a couple of screws
- You dont have to split the PCB off if doing this, you just take off the black clips to take it apart and then remove the orange ribbon cable, it is a little tricky to get the new one in but OK.
I now have a phone as good as new, I didn't replace the SD at the same time but probably will do at some point when I can stand loosing all my data.
Found time today to replace the digitizer. I also used Andy's videos for instruction. And it's really not that hard. Pretty easy for someones first mobile phone repair.
Well done, I would add for anyone else needing to do this, be very careful not to touch the inside of the digitiser or the LCD when you have it apart! Also have a glasses cloth handy for removing any dust particles just before you put it back together.
I do have one strange thing however - before I had intermittent issues where I could not slide the screen up when locked for 10 seconds or so. No I have a slightly different issue when unlocking - it doesn't always let me press on the right hand 3 numbers on the PIN screen! So it seems the unlocking issue some people have is due to a hardware issue. My digitiser was second hand so I might ask for a replacement, but I can change my pin so that it is not an issue.
My Mozart touch-screen hardly works at all plus my wife's Mozart has a cracked digitizer glass (still working fine).
So silly me I took the plunge and ordered three cheap replacement digitizers via eBay (from Hong Hong). They arrived today and all are s**t useless.
When I opened the box I smelt the rat when I spied the HTC logo on each was blanked out on the outside of the plastic zip-lock bags (with what looked like black felt pen), plus each glass has minor blemishes/scratches. Comparing each with the digitizers I removed from my and my wife's phones, they have a different design of ribbon cable conductor layout plus there are indications the plastic moulding isn't as well finished in a couple of places. Either these are factory rejects or knock-off copies. Lesson learnt :-(
Anyway, I now need to buy genuine HTC parts.
Any pointers toward reliable sources appreciated, thanks.
KJ
I have bought some off ebay. The problem is that these are almost always from returned Mozart's which may well have been returned due to non responsive screens, which seems to be a very common problem.
I have had 2 off the same chap now, one is OK but not perfect, the other one didnt work at all.
I would just keep returning them until you get one that works.
Sometimes you will find new combined digitiser/LCD's on ebay too, these would be a better bet but cost more.
Can someone who as changed a screen on this phone using Andys guide, please tell me how easy or hard it was, and how long does it take??
And would be grateful if someone could give me a link to the correct digitizer for this phone....
I am in the UK and have been qouted 50 pounds at a phone shop for the to supply and fit screen...
Did you see my post?
There were a couple of differences to this (Andy's) guide:
- Had to replace a speaker type thing at the top of the digitiser that was not present on the new one. Came off quite easily, just stuck in.
- Had to remove the USB port of the old case back (if you are replacing that too) but that was just a couple of screws
- You dont have to split the PCB off if doing this, you just take off the black clips to take it apart and then remove the orange ribbon cable, it is a little tricky to get the new one in but OK.
The most tricky thing for me was getting all the dust off the LCD and the digitsier, as soon as you get it apart things start sticking to it like crazy. Have a clean glasses cloth around.
It takes about an hour on your first go. The main thing is to get the orange ribbon cablle in fully, it can be tricky - you need to get a good grip on it (fold it a little) and push it home quite hard, otherwise you get it all back together and find it doesn't work.
I have had 2 dodgy screens off ebay, £50 sounds OK if it is a brand new original HTC screen.
Or just search for 'htc mozart digitiser' on ebayt there are loads.
hsclater said:
I have bought some off ebay. The problem is that these are almost always from returned Mozart's which may well have been returned due to non responsive screens, which seems to be a very common problem.
I have had 2 off the same chap now, one is OK but not perfect, the other one didnt work at all.
I would just keep returning them until you get one that works.
Sometimes you will find new combined digitiser/LCD's on ebay too, these would be a better bet but cost more.
Click to expand...
Click to collapse
Thank you for that. A close look at the ones I bought from china I'm sure now are removed from phones with faulty digitizers, then repackaged as new. One of the three had significant dust and dirt on the inside of the digitiser screen. I've requested a refund via PalPal disputes.
I've ordered some digitizers from ecell in the UK. I'm led to believe by them that these are genuine HTC factory supplied spares.
KJ
I just replaced my 4th screen (1 broke, 2 dodgy).
This one is perfect - as new condition and works perfectly, my last one was not responsive in some situations e.g. lock screen.
This is the one I got (UK)
http://www.ebay.co.uk/itm/130498971267?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Of course, your mileage may vary - some are probably good, some not. Replace it, if it doesn't work ask for another, etc.
My new digitizers arrived today from the uk. Horray they are genuine HTC spare parts properly packaged. The downside is they don't include the frame the glass sit in and is adhered to.
So I watched the official HTC Mozart disassembly video on youtube to see how to remove the existing digitizer glass from the frame - got it apart ok after heating the unit to soften the adhesives but it didn't come away entirely cleanly i.e some of the adhesive foam broke away and was left on the underside of the glass.
So... check on eBay and found sellers selling refurbished screen frames ready for a new glass to be attached.
Will update on progress once they arrive.
KJ
just ordered my digitiser today... wish me luck...lol
poolielad said:
just ordered my digitiser today... wish me luck...lol
Click to expand...
Click to collapse
Well I am now buzzing... have just changed my screen at it works perfect.....
£50 they wanted at the shop...it cost me £13....
Just to let you know how easy this is to do........If I can do it, anyone can..
Did anyone find a reliable supply in the end? I just cracked my digitiser so looking to replace it...
--edit--
Also, how much have others paid? Don't want to be ripped off for some sub-standard part.
Hello everybody,
I m trying to replace the digitiser of a HTC Mozart too.
It is really easy to do, even the part where you have to take off the digitiser from the plastic frame.
But I have an issue, it is the second digitiser I am using ( from the same ebay shop ) and the digitiser is working inverted vertically! Really strange but it is like that.
As the mobile phone is started up, when I push on a left buton, it push on a right button ! On the key board, when I press on "P" it press on "A" ( i m using an Azerty layout, I assume it should be "Q" on your layout ).
It is really anyoing of course.
It is the second screen I received from the Ebay shop and same issue, I don't think the problem come from my side, but I just want to ask to you all if somebody have an idea or the same issue once.
fx.lagwagon said:
Hello everybody,
I m trying to replace the digitiser of a HTC Mozart too.
It is really easy to do, even the part where you have to take off the digitiser from the plastic frame.
But I have an issue, it is the second digitiser I am using ( from the same ebay shop ) and the digitiser is working inverted vertically! Really strange but it is like that.
As the mobile phone is started up, when I push on a left buton, it push on a right button ! On the key board, when I press on "P" it press on "A" ( i m using an Azerty layout, I assume it should be "Q" on your layout ).
It is really anyoing of course.
It is the second screen I received from the Ebay shop and same issue, I don't think the problem come from my side, but I just want to ask to you all if somebody have an idea or the same issue once.
Click to expand...
Click to collapse
Mate, I had the same problem. However it seems no one was able to help me either.
I also purchased a digitizer from Ebay for my Mozart - the exact same inverted issue occurred with me. I wasn't able to find a solution.
I'm in Australia with a T8697 model. The digitizer I received from Ebay had a circle around the windows button at the bottom - This was not on my original screen.
In the end, I purchased a digitizer from an Australian business. Cost double the Ebay digitizer did, so I hope it works... Haven't received it yet, but I'll let you know when I put it in.
What model Mozart do you own?
I got the TP2 T-Mobile version.
Let's just say that I love that phone and until windows 8 won't come out i won't ever replace it for nothing !!!
I need to change my Top frame with the digitizer and LCD screen.
My phone looks like that (for who forgot how it looks): http://www.letstalk.com/img/prod/cell-phones/t-mobile/htc/htc-touch-pro-2-tmobile_xl_5.gif
The same shape, the same color (the old good horse).
I can't Find anyware a digitizer made of GLASS + none top frame for that kind of phone.
Can i take a glass digitizer + frame + lcd screen of tilt or sprint and to fix it in ?
will it fit by the size ???
P.S
i took before a test with flex cable of sprint (with the front cam) and put it in and it's working just needed to make a room a bit (mooding style =] ).
Please mates, help me...I don't want to use the iPhones people gave me :'(
http://www.amazon.com/Original-Touchscreen-Digitizer-HTC-T-Mobile/dp/B004WBBNQS
or:
http://www.flexqueen.com/htctwiiitopr.html
mr.horndoctor said:
http://www.amazon.com/Original-Touchscreen-Digitizer-HTC-T-Mobile/dp/B004WBBNQS
or:
http://www.flexqueen.com/htctwiiitopr.html
Click to expand...
Click to collapse
the first one is way expensive + it got no the frame top cover + i don't know if it's made out of plastic or glass.
the second one is for at&t or sprints phones :\
MTN_Cool said:
the first one is way expensive + it got no the frame top cover + i don't know if it's made out of plastic or glass.
the second one is for at&t or sprints phones :\
Click to expand...
Click to collapse
No, both of those say they are made for the T-Mobile version. They are the LCD and Digitizer(touchscreen) combo. Sounds like you want or need a new housing too?
This page has all three available:
http://www.repairsuniverse.com/htc-touch-pro2-screens-repair-parts.html
If you use google you can probably find several more.
You are never going to find a glass digitizer(touchscreen) for this device because the rest of the hardware is only compatible with a resistive touchscreen digitizer that is flexible(plastic.) Glass digitizers(touchscreens) like the one on the HD2 are capacitive. Different technology.
mr.horndoctor said:
No, both of those say they are made for the T-Mobile version. They are the LCD and Digitizer(touchscreen) combo. Sounds like you want or need a new housing too?
This page has all three available:
http://www.repairsuniverse.com/htc-touch-pro2-screens-repair-parts.html
If you use google you can probably find several more.
You are never going to find a glass digitizer(touchscreen) for this device because the rest of the hardware is only compatible with a resistive touchscreen digitizer that is flexible(plastic.) Glass digitizers(touchscreens) like the one on the HD2 are capacitive. Different technology.
Click to expand...
Click to collapse
newsflash - this phone is capable to use a glass digitizer also.
there is a second gen of the phone with glass digitizer (i all ready found one), all need to do is changing the LCD screen also.
but what's stopping me is the top frame.
and this site not have the frame up housing for the T-Mobile.
thanks for trying.
MTN_Cool said:
newsflash - this phone is capable to use a glass digitizer also.
there is a second gen of the phone with glass digitizer (i all ready found one), all need to do is changing the LCD screen also.
but what's stopping me is the top frame.
and this site not have the frame up housing for the T-Mobile.
thanks for trying.
Click to expand...
Click to collapse
Hmm...second gen??
If you are talking about the HTC 7 Pro/Arrive which is basically the same form factor as the TP2 but runs Windows Phone 7 then that is a completely different device. Sorry dude, I seriously doubt that's gonna work.
Here's a link to a top housing:
htcrepairparts.com/front-cover-housing-for-htc-touch-pro-2tmobile-p-2882.html
mr.horndoctor said:
Hmm...second gen??
If you are talking about the HTC 7 Pro/Arrive which is basically the same form factor as the TP2 but runs Windows Phone 7 then that is a completely different device. Sorry dude, I seriously doubt that's gonna work.
Here's a link to a top housing:
htcrepairparts.com/front-cover-housing-for-htc-touch-pro-2tmobile-p-2882.html
Click to expand...
Click to collapse
no mate, not HTC 7PRO.
the HTC TP2 is one of the phones that got too much versions.
If it's sprint / At&t / Verizon etc...
and it T-Mobile (for example) it got 2 versions - The one before the 3GS (plastic digitizer - Gen one), and the one that after the 3GS came out (Glass Digitizer - Gen 2).
Don't you fix phones to know that ? :S
Seems easier to completely replace with a used phone rather than try to repair. I just bought a used TP2 for my wife (same as mine) for $60 on ebay.
horizons1 said:
Seems easier to completely replace with a used phone rather than try to repair. I just bought a used TP2 for my wife (same as mine) for $60 on ebay.
Click to expand...
Click to collapse
I love to repair stuff.
and that's need to be only 25-30 dollars to fix it instead of buying used one.
MTN_Cool said:
no mate, not HTC 7PRO.
the HTC TP2 is one of the phones that got too much versions.
If it's sprint / At&t / Verizon etc...
and it T-Mobile (for example) it got 2 versions - The one before the 3GS (plastic digitizer - Gen one), and the one that after the 3GS came out (Glass Digitizer - Gen 2).
Don't you fix phones to know that ? :S
Click to expand...
Click to collapse
Well "mate", no I don't fix a lot of phones other than my own but I do know quite a bit about these devices. Sorry, but the Touch Pro 2 was never sold or distributed with a glass digitizer so you won't find a replacement digitizer made out of glass to install. Even if you did find one to fit the rest of the hardware would not support it or function properly and maybe the device wouldn't work at all. The LCD, however, IS made out of glass. The LCD/Digitizer assembly consists of a glass LCD screen with a flexible plastic Digitizer glued to the LCD panel with an adhesive. That's what you'll find to repair what you have and that's what I tried to help you find with the links I gave you. I wish now I had never tried to help you because you seem to be quite a smarta$$ and aparently you already know everything and you just want to argue so I'm done trying to help you.
By the way, what is this 3GS stuff you are talking about? If you are referring to the iPhone then it has nothing to do with this device. You must be really confused or you're just ignorant.
What a waste of time this was.
look on the original question please.
i am looking to fit a htc tp2 like the orginal (no t-mobile one) to the t-mobile version.
the question was if it will fit by the size ? - if i will replace the frame, screen and digitizer.
that's what i don't know, if it will sit properly on the case.
all the other stuff on the device i know. and i have lots of devices but that one i LOVE !!!
Only the t-mobile digitizer fits on the t-mobile version of the phone (if you don't replace bezel and frame. It is different from all the other variants of the Tp2, but they all use the same screen.. It's still a resistive glass digitizer in all the versions despite their form differences. There is no capacitive (if that's what you mean by "glass") version of the phone.
If you wanted to replace the entire top sliding/tilting part of the tp2, it would probably work, but the placement of the flex cables and motherboard may be different. If you look on the HTC website for the t-mobile tp2 and all the other tp2's, the dimensions are identical in all versions. There is no guarantee that they will fit, but you can tell us if it fits or not
e334 said:
Only the t-mobile digitizer fits on the t-mobile version of the phone (if you don't replace bezel and frame. It is different from all the other variants of the Tp2, but they all use the same screen.. It's still a resistive glass digitizer in all the versions despite their form differences. There is no capacitive (if that's what you mean by "glass") version of the phone.
If you wanted to replace the entire top sliding/tilting part of the tp2, it would probably work, but the placement of the flex cables and motherboard may be different. If you look on the HTC website for the t-mobile tp2 and all the other tp2's, the dimensions are identical in all versions. There is no guarantee that they will fit, but you can tell us if it fits or not
Click to expand...
Click to collapse
thanks you man, that is very helpfull - i think it will do it later
A friend of mine has an ATT Titan (phone says PI39100) with a cracked front glass. I was looking to purchase a new front lens/digitizer for her phone and do the replacement. Most of what I find online are for the x310e.
Long question short: is the front lens for the x310e the same exact one as for the PI39100? or are the two not compatible?
Also, if someone can point to a DIY for doing this I'd appreciate it - otherwise, i'll take on it the same as the Galaxy Tab 10.1 I did earlier this week (using a hair dryer and an exacto knife) I would like to at least know the lens is the same so I can order soon.
Thanks in advance.
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
malvo26 said:
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
Click to expand...
Click to collapse
Excellent. This is EXACTLY what I was looking for. Thank you VERY much for your assistance
Oh, and it's the glass cover that's broken, because she's still able to (and currently continues to) use the phone. On ebay, I've seen the glass and digitizer going for under $30 shipped, so I think it's reasonable enough.
Thanks again. :good:
Glad to help. That's we are all here for: help each other.
Guys,
Today I dropped my DX (so much to say about Friday the 13th...)
You can see it in the attached picture. I just wanted to ask, will the following replacement work:
http://www.ebay.de/itm/HTC-Desire-X...AU_MobilePhoneAccessories&hash=item20d2dca972
Thank you in advance!
Few weeks ago, I dropped my DX too, although damage was less. I read about digitizer replacement on HTC devices (in general) and I read it's not that easy as on Samsung devices. One guy tried to replace digitizer and he ended up with broken LCD panel. You can also buy whole module (LCD screen + digitizer) but it's like a roll of a dice - you can get good lcd and you can get bad lcd too. It's a risk. You can send it to local repair centre. I was told it would cost about 100-120€. From then, I knew, I have to live with that broken screen. lol
Found something different:
http://www.parts4repair.com/complete-screen-assembly-with-lgp-for-htc-desire-x-t328e/
Does anybody have experience with that shop? The price is ok, I would even order a new back cover there (because mine is a bit broken, too).
Hard to replace
I've tried to replace the touch screen (only the glass). In eBay it's about 25$ or something like that.
It hard, very hard to replace. I've ended with a broken LCD, because when try to separate the glass from LCD, LCD broke.
For me, it's better to replace the whole screen, not only the glass. I've seen it for 51$ in eBay, but worth it.
Video on how to replace (as you can see, you need a dryer, and big ball, because phone gets VERY hot, and you're the whole time thinking you're going to melt it
.you*tube*.co*m/*watch?v=hzRsLDahWVg
I won't try to replace only the glass, because my lcd is already broken. So I'll replace whole display unit (see link above for shopping details). Video on how to replace just the whole screen assembly can be found here: https://www.youtube.com/watch?v=hzRsLDahWVg
Good news guys... My package arrived in Germany, so soon I will be able to replace my screen and get my DX working again...
I have a Problem
I didnt drop my xtouch but its touchscreen isnt working at the corners HELLLPPPP
WHAT TO DO?
Anybody knows a reliable source for a new lcd + digitizer module for desire X?
kisbatyu75 said:
Anybody knows a reliable source for a new lcd + digitizer module for desire X?
Click to expand...
Click to collapse
Look a few posts above, my post #3 contains a link (that's the shop I used, lcd + digitizer are stil working well).
Firday the 13th... aaaand I dropped my Desire X smack on the corner, leaving me with a nice mosaic of cracks all over.
Thanks for the provided links. Guess I have some tinkering ahead of me....
help
after i replaced removed the digitizer and put it back it not sticking ...
i cleaned it using glass cleaner also ...!!
[email protected] said:
after i replaced removed the digitizer and put it back it not sticking ...
i cleaned it using glass cleaner also ...!!
Click to expand...
Click to collapse
Did you remove the digitizer from the lcd? If yes, I actually don't know what to do; but I used a complete assembly of lcd and digitizer as replacement. It's sticking at the four corners, at least for me.
Its is sticking but slight gap near the ui keys .....
I think there is dust between the screen and the digitizer
Sent from my HTC Desire X
hi help
can i use this
http://www.ebay.in/itm/121348746163?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
or
http://www.ebay.in/itm/151326952917?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
to stick the glass back
which is better to buy
please some one tell fast