Related
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
kameisama said:
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
Click to expand...
Click to collapse
Time to take it in and get a new one.....
Same problem here phone started b not coming out of lock mode. Backlight is on but no display on screen (if i tilt the screen left and right i can see light coming from behind) did about 6 hard resets and still same problem. also power button works whenever it wants to. this phone sucks @ss, i want my mogul back. on a second note my replacement will be here on wednesday.
Touch Pro stock rom purchased back in nov when it came out
yeah, i've had the same problem, i found if i hit my phone on the back or side and then batter pull and hit the soft reset while off, not the power button to turn it back on, it comes back on with color on the screen not just blank black screen with backlight, this works mostly every time, but when it doesn't, i just hold the power button down and do battery pull and hit the power button and it works, its like its got a combo of things you have to do before it works.. weird
Boot Up
I have also had similar problems. I for some reason sometimes have to remove my SD card and boot up without it for some reason. Not all the time, but every once in a blue moon. Not too sure how that affects anything, but you may try that too.
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Mayonesa said:
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Click to expand...
Click to collapse
Have you tried re flashing the ROM?
it wasnt HTC's fault for your phone's not booting...thats what happens when u try to mess with the hardware too much and you dont know what your doing
Would you want to sell???
Reboot Brick HTC process
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
hey thanks plain ole dumb, it works now.
man I thought it was over.
thanks again
Hi All,
I have a problem with my Hero, and i am hoping some one could help, here goes:
I had my hero for about 6 month working perfectly including GPS with Waze.
Yestderday i decided to try out some new roms, i backed up my stock (with root) firmware 1.5 with nandroid. i installed Villainrom V12 everything worked exept Waze, it kept giving me messeges that there is no satelite reception (which is not possible cause i always used to get reception there). So i went back and restored my backup and now it's the same, no satelite reception . . .
Did i some how fry my GPS component ? or is it fixable.
Thanks in Advance
Can't really help you with a fix but last sunday I didn't get a sat fix at home, drive 50 miles to London, still no fix, tried turning the phone on and off, gps on and off still wouldn't get a fix all the way there. Stayed in London for three hours, turned gps on when I left and got a instant fix! Been working fine ever since!
I've had very similar problems with my GPS. It worked great on stock, but when I installed a custom ROM, I started having intermittent issues. I'm using VillainROM 12 and the most recent radio, and sometimes I get a fix right away, and other times I don't get a fix at all. When I can't get a fix, rebooting the phone almost always gets it working again. I had the same problem with an older radio and VillainROM 10. I do remember seeing a tentative workaround somewhere in these forums, but am having trouble finding it again...
I spoke to soon, I tried it with gps status last night, wouldn't get a lock, drove 6 miles, still no lock, left in on for an hour, still no lock. Did a hard reset last night, got an near instant lock with gps status. I've tried it about 4 times today, got a lock everytime. I'll test it all week and see what happens.
Well i had kept my stock radio , maybe i should try updating that and see what happens.
@marky33 When you say hard reset what do you mean ? did you take the battery out ?
Hard reset is just shut down the phone and turn it on again (rather than soft - i.e. reboot using buttons). This can fix GPS issues but in most recent ROM's it should be fixed by default. It can also be a radio issue - get the latest and you shouldn't have a problem.
Ive had this problem with villainrom 12, the fix used to be to switch on the gps before a reboot, and then after rebooting ( with the GPS switched on) it would work and find satellites.
I havnt had this problem since switching to Radio 63.18.55.06PU_6.35.15.14
Radio I used which had this problem with villainrom was 63.18.55.06JU_6.35.09.26
btdag said:
Hard reset is just shut down the phone and turn it on again (rather than soft - i.e. reboot using buttons). This can fix GPS issues but in most recent ROM's it should be fixed by default. It can also be a radio issue - get the latest and you shouldn't have a problem.
Click to expand...
Click to collapse
Haven't you got hard and soft the wrong way round?
solarporing said:
Well i had kept my stock radio , maybe i should try updating that and see what happens.
@marky33 When you say hard reset what do you mean ? did you take the battery out ?
Click to expand...
Click to collapse
Like this below, wipes all user data
Power the unit off (removing the battery if necessary)
Hold down the Home and Back keys
Press the power button whilst still holding down the Home and Back keys
After a few seconds a message will be displayed on the screen prompting you to press the Menu button to confirm the reset process.
Release all buttons, then press the Menu button to hard reset the device
marky33 said:
Haven't you got hard and soft the wrong way round?
Click to expand...
Click to collapse
No, a hard reset is usually a reset which removes all power from a device and then starts again - i.e. resetting the hardware itself by removing power
A soft reset is a software reset - i.e. rebooting the software of the phone
marky33 said:
Like this below, wipes all user data
Power the unit off (removing the battery if necessary)
Hold down the Home and Back keys
Press the power button whilst still holding down the Home and Back keys
After a few seconds a message will be displayed on the screen prompting you to press the Menu button to confirm the reset process.
Release all buttons, then press the Menu button to hard reset the device
Click to expand...
Click to collapse
What you're talking about is probably a "factory reset" which should reset the device to factory defaults (i.e. just been sent from HTC's manufacturing factory). But i have never seen it referenced to as a fix for GPS issues - or any issues involving custom rom's for that matter.
I stand corrected about hard and soft
Just wanted to let the people know that the problem was solved after doing the same thing as nijnvy, the second i updated i am getting gps lock in seconds.
Thanks to every one
Hello,
I experience a very weird problem with my HD2.
When I want to connect my HD2 to pc then my pc (and other pc's) doesn't recognize my phone, nothing happens. Also my phone isn't giving me the option between "Activesync" "Disk drive" or "Internet sharing". (Altough the option to ask it on connection is turned on under settings). So not an active sync problem I guess. The usb doesn't seems dead because it still charges, on my HD2 the power sign comes up when I connect the usb to pc and the led is on. When I pull it out then the led goes off and the power sign dissapears. But no "data" connection is possible anymore.
Is something broken in my registry? I tried soft resetting several times.
No hard reset yet but I am waiting to do this, maybe someone here knows the answer.
I started experience the problem after I used Tomtom last week ( i used it alot already) . I experienced a problem that my HD2 was stuck in "Carkit mode" thus when someone called me he flipped the screen and putted speaker on. Even when I set it off under settings it. Navipanel was also turned on. I downloaded the hotfix from HTC for Navipanel and now that problem is gone. My phone is again in normal mode when I call or receive calls. BUT the usb data connection doesn't seems to be working anymore .
Someone here knows the magic answer ?
Can you post the Radio version and ROM version you are using?
ROM version : 1.66.405.2 (76641) WWE
Radio version : 2.06.51.07
Have you ever changed the ROM on your device or is all still origional as you got it from the store?
If origional:
1) bring it back for repair, since its not your fault
2) or install HSPL change your radio and rom
I would just send it for repair when that happens. Specially when its in origional state.
I had this problem once but at the moment i connected the phone through a USB Hub
No it is the official upgrade rom from htc site.
Phone is acting weird also.
Everytime someone is calling it puts the speaker on .
Maybe I try a hard reset for this "fkd up" software?
Would this help?
Hmm did a hard reset and the problem persists.
No usb data connection.
Speaker turns to loud when someone is calling me.
Screen flips sometimes.
Guess it is a hardware problem.
Going to turn it in.
Although I completely agree that your unit is probably on the fritz, take into account that the MicroUSB cable can be the problem as well when it comes to connecting to your pc. I bought some Ebay cables and my phone wouldn't connect properly with those. Charging was no problem.
Yes it is on the fritz i guess.
The problems started suddenly and I also tried another usb cable who was also working fine before.
I managed to get connection yesterday just once after pushing it in the phone and moving it a bit. So I guess the usb input is broken or the motherboard. Guess it is the motherboard because of the other weird problems (when want to call someone the screen turns vertically and puts the speaker on), also when i got called. And this after a fresh hard reset.
Hope they will replace the unit without a hassle.
Hi,
I've been installing and testing various ROMs for my T-Mobile Leo (HD2) before and never had any problems until now. Problem is, after the last flash, I noticed the phone doesn't vibrate any more, I've checked all the settings and even turned vibrate on/off, nothing helps. Also, if I long press the end key to shutdown the phone, it freezes, I then have to press end to lock, wait about 30 seconds then unlock to be able to use again. Important to note, when the phone freezes, only the touch screen freezes, the buttons continue to work, and I can even call the last party or answer/end calls.
I flashed some older firmwares that I used to use that used to work, but these problems still persist.
Is there any way I can diagnose the phone hardware completely? Any program or tool? I live in Guyana, South America so taking it to a repair centre is not an option, basically, I have to fix it myself.
Did I post this in the wrong thread/forum? Why and I not getting any help?
I'm still having this problem and need help! Somebody... any suggestions???
Notorious_PDR said:
I'm still having this problem and need help! Somebody... any suggestions???
Click to expand...
Click to collapse
Mate, honestly, I never notice that it would vibrate on long pressing
As long as your phone is working, then you shouldnt worry about it.
Or else, you can try to restore to original stock rom and see if this is due to hardware problem or software problem
I don't mean that it vibrates on long press. I said that it has stopped vibrating AT ALL!
In addition to that, the phone freezes alot, especially when I long press the end key. It is behaving like a hardware problem, that's why I'm asking about diagnostics for the HD2.
I dont think its anything to do with the rom. I had the same problem with mine, what happens is the flash lens gets pushed inside and stops the vibrator from rotating. Just check the lens if u see it pressed, its an easy fix if u know how to take the phone apart. For instruction check out youtube. I hope this helps.
silverwind said:
Mate, honestly, I never notice that it would vibrate on long pressing
As long as your phone is working, then you shouldnt worry about it.
Or else, you can try to restore to original stock rom and see if this is due to hardware problem or software problem
Click to expand...
Click to collapse
You should probably read back my post... I said the phone stop vibrating... not that it stop vibrating on long end press... It also freezes when I long end press... Hence, the reason I asked for any diagnostics for the HD2 as I suspect it may be hardware related...
gurkhali1 said:
I dont think its anything to do with the rom. I had the same problem with mine, what happens is the flash lens gets pushed inside and stops the vibrator from rotating. Just check the lens if u see it pressed, its an easy fix if u know how to take the phone apart. For instruction check out youtube. I hope this helps.
Click to expand...
Click to collapse
This actually seems to be the problem, I will open the phone and check... Thank you so much for your suggestion, I followed this suggestion, and now the touch screen is not working... but the phone is vibrating again. Any ideas what I will have to change now?
Hi guys. I'm totally new to the android/smart phone world btw. Anyways, I recently got my Samsung Galaxy S2... first thing I noticed, my touch screen wasn't working. I popped the battery in and out and then it started working as it should.
My phone was working fine this morning, then all of a sudden out of no where, the touch screen stopped working again. I've tried turning on/off the phone multiple times. I've taken out the battery and even my SIM card nothing... i'm worried.
Has this happened to anyone else? Is there a fix? Do i have to go through Samsung? I hope not. Incase anyone asks, I did not root my phone.
Any help/feedback would be appreciated.
When the touchscreen stops working... were you charging the phone at that time?
The first time i turned on my phone, was actually by accident and it was charging.
However, just earlier now, it was not. it was just sitting on my computer desk. The home button, lock button and touch capacitive buttons work.... but i can't get past the lock screen
you could try a factory reset to see if its software related, but it sounds like hardware. I would definitely Return the phone .
I guess I can't do a factory reset, since I can't get into any of the menus... man this sucks. I spent $900 *gulp*
To do a factory reset,
1. Turn the POWER OFF, pull the battery out and put it back again.
2. Simultaneously press and hold the Volume Up, Home and Power button
3. If the Samsung Symbol appears, release the Power button
4. A Boot Menu will then show, Use the volume up/down to choose wipe data/factory reset.
touch screen not needed this way.
oo that's interesting... I tried it. and it didn't get to a boot menu. maybe I was doing it wrong. I tried a few different ways, but no success. It turns out I have warranty with the store. They're going to replace it for me Thanks for the feedback guys. Awesome forums.
Something similar happened to me yesterday. When I had the in-box USB cable attached to a BoxWave VersaCharger (combined AC/DC charger), and the VersaCharger was plugged into 120V AC, the touchscreen would stop working. As soon as I unplugged the USB cable from the SGS2, or plugged the VersaCharger into a 12V DC lighter socket, the touchscreen would work fine.
I've got the same problem as the OP... I had my phone charging overnight and this morning when I first went to use the phone I could not unlock the screen. I could wake the screen via the home button, and see I had a missed call etc but it just wasn't responding to touch. BTW I can't remember if when I first tried to unlock the phone if it was charging or not but really this shouldn't matter.... oh and btw, I'm not rooted or anything either! Naturally I rebooted the phone but still the same problem....so I tried a battery pull and still the same problem. Just now I did a factory reset but the touch screen still isn't working! I guess this is a hardware problem so I'm going to get it fixed under warranty by Samsung! Gutted that I will likely be without my phone for a week or 2!
EDIT, UPDATE...
Well, I was just on my way to the repair shop Samsung warranty had told me to take it too, and I took my sim card out to put in my old Hero (the only thing I hadn't tried!) and I couldn't believe it but the touch screen started working fine again! Weird, but that is now my advice if anyone else has a problem with their touch screen not working - oh and I took the sim out whilst the phone was still turned on. Crisis averted!
UPDATE 2
Sadly this has happened about 4 times to me now and I'm just waiting for the inevitable next time. Each time doing a factory reset then taking the sim card out seems to bring the screen back to life (though last time not immediately) but I shouldn't have to put up with this. Problem is, I don't want to send off a seemingly perfectly working phone to get repaired as I fear they will struggle to notice the problem, never mind fix it! I'm hoping a new firmware comes out soon, in the hope that it may resolve my issues...
Me as well ...
I have had this happen to me twice now (Touchscreen not responding).
The first time I had just installed a game and thought it must have been related to that. Pulled the battery and no joy, left it for a while and it came back to life...
Second time I was surfing the web and it stopped responding, pulled the battery and left it for maybe a minute but no joy .... pulled the battery again and left it for probably 20min and it came back to life. When it came back up I noticed the livewallpaper had been turned off and my widgets were gone from the homescreen.
What I did notice when it wasn't working was it had "safe mode" displayed at the bottom left of the screen
Have the Same Problem
Have the same problem i Mine and was super exicedat first it worked fine and after charging the touchscreen stopped working i pulled the battery out and put it back in but no luckso im gonna return mine to the shop hope they replace it
Moral:AT FIRST SUPER EXICTED BUT NOW SUPER ANGRY
Same issue - Is there ANY way to save my data before I send it in for repair/replace?
Hi all,
As of this morning, I have exactly the same issue as the OP. Screen doesn't react to touch, with the exception of the capacitive buttons. I found a dude on YouTube that had the same issue: youtu.be/0oIdllWiV4I
The last thing I did with the phone before it started misbehaving was to answer a call. The phone was on the charger when the call came in - I can't recall whether I unplugged it before answering, or after, or at all during the call. Not sure it has any relevance anyway, only mention it because I've seen reports of people's screens no longer reacting to touch when the phone is plugged in to a charger (apparently it even states in the manual that this may happen).
Anyway, whilst all my contacts, SMS, photos etc are backed up to the cloud, the same can't be said for my app data. Before I lose hours and hours of progress in various games, or all my settings in numerous other apps, etc, can anyone think of any way to get access to the memory of the phone, bearing in mind the following:
I can't connect to Kies to pull a back-up because bluetooth is currently enabled on the phone and when one connects the USB cable, it says "Activating USB mode will deactivate Bluetooth. Continue?" but I can't click the Yes button
I can't connect in USB mass storage mode because I can't navigate to the settings menu entry to enable it
I can't turn Bluetooth off in order to get Kies working, becuase I can't get to the settings menu or pull down the notification bar to reach the power control.
I can't use Voice input to control the device (on the off chance there was a "bluetooth off" voice command) because (presumably with the most recent firmware I flashed via Kies a few weeks back) for some reason Vlingo is no longer the app on the double-home button action. Instead it calls Samsung Voice and wants to walk me through a first use tutorial, but I can't click the next/skip buttons
I installed via Android Market push the app belonging to www_remoteaccessphone_com as it promises to be able to remotely switch bluetooth off, but the website says I haven't installed the app yet, presumably because alrhough I was able to install it without touching the phone, it probably needs to be run at least once to set it up, and I obviously can't do that
I can't start Kies Air to try and get my data that way (starting it would require using the touch screen)
Kies via bluetooth isn't supported on Android
Needless to say, the data I'm trying to retrieve is on the internal memory, not the SD card. As you can see I've been trying all sorts of creative things, but I'm fairly sure I'm screwed. Any bright ideas I haven't thought of?
blaubeer said:
Hi all,
As of this morning, I have exactly the same issue as the OP. Screen doesn't react to touch, with the exception of the capacitive buttons. I found a dude on YouTube that had the same issue: youtu.be/0oIdllWiV4I
The last thing I did with the phone before it started misbehaving was to answer a call. The phone was on the charger when the call came in - I can't recall whether I unplugged it before answering, or after, or at all during the call. Not sure it has any relevance anyway, only mention it because I've seen reports of people's screens no longer reacting to touch when the phone is plugged in to a charger (apparently it even states in the manual that this may happen).
Anyway, whilst all my contacts, SMS, photos etc are backed up to the cloud, the same can't be said for my app data. Before I lose hours and hours of progress in various games, or all my settings in numerous other apps, etc, can anyone think of any way to get access to the memory of the phone, bearing in mind the following:
I can't connect to Kies to pull a back-up because bluetooth is currently enabled on the phone and when one connects the USB cable, it says "Activating USB mode will deactivate Bluetooth. Continue?" but I can't click the Yes button
I can't connect in USB mass storage mode because I can't navigate to the settings menu entry to enable it
I can't turn Bluetooth off in order to get Kies working, becuase I can't get to the settings menu or pull down the notification bar to reach the power control.
I can't use Voice input to control the device (on the off chance there was a "bluetooth off" voice command) because (presumably with the most recent firmware I flashed via Kies a few weeks back) for some reason Vlingo is no longer the app on the double-home button action. Instead it calls Samsung Voice and wants to walk me through a first use tutorial, but I can't click the next/skip buttons
I installed via Android Market push the app belonging to www_remoteaccessphone_com as it promises to be able to remotely switch bluetooth off, but the website says I haven't installed the app yet, presumably because alrhough I was able to install it without touching the phone, it probably needs to be run at least once to set it up, and I obviously can't do that
I can't start Kies Air to try and get my data that way (starting it would require using the touch screen)
Kies via bluetooth isn't supported on Android
Needless to say, the data I'm trying to retrieve is on the internal memory, not the SD card. As you can see I've been trying all sorts of creative things, but I'm fairly sure I'm screwed. Any bright ideas I haven't thought of?
Click to expand...
Click to collapse
flash it with CF-root, boot into CWM recovery, do a nandroid backup after that, use CWM recovery again to mount USB storage, connect to your PC and pull everything off.
Nitrile said:
flash it with CF-root, boot into CWM recovery, do a nandroid backup after that, use CWM recovery again to mount USB storage, connect to your PC and pull everything off.
Click to expand...
Click to collapse
Thanks for the quick advice. I guess I'll need to use my girlfriend's phone to download CF-root and then transfer the SD card to my device. Quick question before I proceed though - is it possible to remove all traces of such tampering, since I've already made out with Samsung that I'm sending it in for repair, and I'm not sure they will honour the warranty if they see it has been rooted etc.
blaubeer said:
Thanks for the quick advice. I guess I'll need to use my girlfriend's phone to download CF-root and then transfer the SD card to my device. Quick question before I proceed though - is it possible to remove all traces of such tampering, since I've already made out with Samsung that I'm sending it in for repair, and I'm not sure they will honour the warranty if they see it has been rooted etc.
Click to expand...
Click to collapse
get a USB jig off ebay or amazon to reset the flash counter. should not cost more than 5 or 6 euros, shipped.
anyways you need to flash CF-root through ODIN if you are coming from stock. instructions are all in chainfire's cf-root thread.
Nandroid Restore
So I successfully rooted, used CWM to do a Nandroid backup, mounted the sd_card and saved the contents (including the nandroid backup) to my PC, reflashed the stock rom & kernel, usb-jigged it to get the counter back to zero/original and sent the phone in for repair. My efforts paid off as they repaired it without question under warranty. I just received the phone back and today set about restoring my backup:
Copied the sd_card contents I'd saved to my HDD back onto the phone
Re-roooted it with Cf-mod.
Used CWM to restore the backup I took before sending it in
It restored boot/system/data/cache successfully
selected reboot now in CWM
The result is that it is still missing all my apps. It only seems to have the "data" like my camera shots and SMS messages, system settings like whether bluetooth is on or off, the volume level, Wifi networks etc. So something was restored. But there is no Google Account configured, the lock screen picture is the default not the one I had beforehand, and as I said, all the apps - the main reason I did this whole thing as my personal data is all backed up to the cloud on a regular basis anyway - have not been restored. Am I confused? I thought a nandroid backup took a complete snapshot of everything, apps included.
Finding out the list of Apps I had in order to reinstall them is not an issue - I have a list of everything I had installed saved on AppBrain. But if I reinstall the apps, all the settings (or progress in the games) within those freshly installed apps will be back to square one, not where I left them, right? Or should I reinstall the apps and then restore the data partition over the top again?
Are you guys using any type of screen protectors, cause if you are, that may be the issue s their have been reports that the screen becomes unresponsive with certain screen protectors when connected to a charger.
However, if you are not using a screen protector, then I would suggest getting the unit replaced as you should not have to do anything, root or otherwise, to get the touchscreen working on a touchscreen phone
achillies400 said:
Are you guys using any type of screen protectors, cause if you are, that may be the issue s their have been reports that the screen becomes unresponsive with certain screen protectors when connected to a charger.
However, if you are not using a screen protector, then I would suggest getting the unit replaced as you should not have to do anything, root or otherwise, to get the touchscreen working on a touchscreen phone
Click to expand...
Click to collapse
Nope, no screen protector or any kind of case for that matter. Anyway, that isn't my issue anymore. The touch-sensitive unit was defective, the phone was repaired under warranty. My issue now is getting my apps & settings back. I have meanwhile read elsewhere that Nandroid doesn't back up the apps - pretty deceptive "backs up everything!" "it is like time travel" etc comments around here then.
Anyway, I reinstalled all the apps I had previously, and thought by reapplying the data partition from the nandroid backup it might then bring back the settings for the reinstalled apps. Instead all it did was remove all those apps again - now I am really confused. How come the restore DOESN'T bring back the apps I used to have, but DOES remove the ones I subsequently install. Does Nandroid touch the apps or doesn't it?
Touch screen not working
So i am having a very peculiar problem related to the GT-I9100 Touch Screen.
I bought the phone from Saudi Arabia and I live in Bangladesh at the moment. So for now I don't have warranty.
I bought it on 4th of this month. It had 2.3.3. So I updated it to 2.3.5. I did not use the phone much before that so I don't know if this problem was there before.
So here is the problem.
First time I noticed it when i pulled the phone from my pocket and could not unlock the pattern. First I thought I forgot the pattern. After sometime I noticed that i could not touch the buttons. I was dragging my finger over the points but there was no connecting line. I restarted the set. But it still did not work. After sometime I took the battery out. And after that it started normally and unlocked. And the touchscreen is totally fine.
I tested it using *#0*#. And every single point in the screen registers touch.
After that this happened couple of times. First couple of days I thought it was a pattern unlock problem. But i tried PIN and Password even using no unlock. It happened in every case.
So after couple of days it totally stopped happening.
But from yesterday it is happening again. And today it happened 3 times.
So today as I had no unlock protocol i tried tapping Home twice. As this brings on the voice command menu. And for the first time i was in the phone without touching the screen.And first i noticed the Menu and Back Soft keys works.And the touchscreen still does not work. And i noticed some thing weird. Always some thing in the screen is Selected. In Menu the + Icon is selected. In first screen the Map icon is selected. Also in Recent Apps the first App is selected. So after a lot of reboots it is back to normal again. Now i see something interesting. In the Battery Usage Graph i can see some really sharp drops. 3 times. Looks like when this happens phones charge takes a nose dive.
So here is the Gist.
Info related the Problem:
1. Usually happens when the phone is my pant pocket for sometime. It does not happen if it is sitting on the table.
2. Touchscreen gets totally disabled.
3. I have no idea why this happens.The exact reason behind it.
4. Battery Charge takes a nose dive when this happens. See the attached images.
5. I still don't know how to bring it back. Sometimes a simple reboot works. Sometimes I have to pull the battery. And sometimes it works on its own.
6. Every other function of the phone works. Like music playback using my UE 200vi music keys using PowerAMP, Siri(Android version), Call can be received using headset.
Battery nose Dive:
dl.dropbox.com/u/30943431/SC20111115-203017.png
dl.dropbox.com/u/30943431/SC20111116-202913.png
Also the selection
dl.dropbox.com/u/30943431/SC20111116-202146.png
So this is the thing. My biggest problem right now is, I don't know why it happens and I don't know how to bring it back from this situation. If I knew I could make sure I don't get it again or I would just fix it every-time. As when this happens I cant make calls or anything which requires the touchscreen.
So guys help me if you can by giving ideas. As i will not go back to KSA in 6 months. So buying a $550 phone unlocked was a total waste. As i cant use it here.
Thanks a million in advance.
---------- Post added at 09:29 PM ---------- Previous post was at 09:13 PM ----------
Sorry for this. But looks like i cant post outside links before i have 8 posts. So i removed the "ht tp : //" part of the links. Copy paste in browser address bar and it will open fine.
And also the next time it happens i will do a video to shou you guys.
Having the same problem while charging touch screen doesn't work
Stock charger and usb cable
i was on CM7 but that happend so i flashed stock but no luck
I will write more observations