Has anyone replaced the little plastic flap that covers the USB port? Mine has finally broken off.
Is there anywhere to get a replacement online, and is there a resource for disassembly for the g1?
TIA
My device (Touch PRO) doesn't have it at all. I've seen that some devices have it and some don't. I think you can compare it to suspension housing of mountain bikes - some have some don't. It is just a question of dirt management style. While covers avoid the dirt getting in they also keep the trespassed dirt in there which also is not good. I don't think there is a good answer
I dont think he is looking for an opinion, I think he just flat out wants one. I could use one too, mine is broken as well.
As far as replacing, you can carefully insert it using a blunt pointed pin, I used some piano wire that was lying around when I did this to my last G1. Just "push" the ball into the housing. Alternately, you can use the plastic pry tools to lift that area, but it is a lot more work.
darfri said:
While covers avoid the dirt getting in they also keep the trespassed dirt in there which also is not good
Click to expand...
Click to collapse
I'm not super concerned about dirt, and actually prefer not having it, but if i ever want to sell the device it would be nice to have it intact.
gospeed.racer said:
I dont think he is looking for an opinion, I think he just flat out wants one.
Click to expand...
Click to collapse
Who comes to XDA not expecting an opinion? So does anyone know if replacements are available?
bittermormon said:
I'm not super concerned about dirt, and actually prefer not having it, but if i ever want to sell the device it would be nice to have it intact.
Click to expand...
Click to collapse
Exactly what I'm thinking! Mine broke recently and I actually like my phone without it better. However, as soon as my contract expires, I will want to sell my phone and get N1, so I think having all parts in place would be helpful, but I can't find it anywhere
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Technochris1 said:
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Click to expand...
Click to collapse
That might work. I'll order some and then post pictures.
Technochris1 said:
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Click to expand...
Click to collapse
Nice find
Karolis said:
That might work. I'll order some and then post pictures.
Click to expand...
Click to collapse
Looking forward to it.
I'm in the UK and they ship from the US, so it might take a while. I've ordered it on 15th and got a shipping confirmation the next day, so hopefully some time next week I'll have them.
OK, got them... and I think it's a bit of a waste of money. They're too small and also when you need to for example plug-in the headphones, you have to figure out where to put those flaps not to loose them.
Anyway, you decide:
Related
I ordered this case a while back, and I absolutely love it.
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45eeeac5fa
The one I ordered was a little cheaper, and didn't include the lcd protection, but the case is the same. Anyway, I think I paid around 8 bucks or so. I did have the body glove case, drilled a hole for the proximity sensor, but after a while, the case started to catch on the clear plastic sticker on the back of the lcd screen. It also started to catch on the side stickers beside the keyboard. This new case fits extremely well, and has yet to catch on anything. The only grip I have is that it is a little slick, but not enough to deter me. Just thought I'd share.
i got the exact same one man. love it
s0calstate0fmind said:
i got the exact same one man. love it
Click to expand...
Click to collapse
Yeah, it fits perfectly, plus it looks a lot nicer too. Every time I pull it out, everyone always asks me, "Whoa, what phone is that?" I hated having to wear that belt clip for it. Now, I can leave it in my pocket without the side bag on my belt.
Could you post some pics of the phone inside the case plz?
An To Mi said:
Could you post some pics of the phone inside the case plz?
Click to expand...
Click to collapse
Yeah, no problem. My phone is really dirty, but I was in a hurry. Looks really nice I think. I get all kinds of compliments from it.
will this def not fit an at&t tilt 2??
Thanks for posting the pics! I agree, it does look good. I'm gonna order one now
Here's a link for a "clear enough"(actual color listed as Smoke Transparent) hard case for Sprint/TMobile TP2s
My first post to these forums, I don't have a TP2....yet, but I'll pull the trigger as soon as I've finished researching a few more things. All the information seems to be here, I just need to read through it all.
http://cgi.ebay.com/Smoke-Trans-Case-for-HTC-Touch-Pro2-CDMA-Sprint-Verizon_W0QQitemZ280417518162QQcmdZViewItemQQptZPDA_Accessories?hash=item414a2fc252
bubbaclutch said:
will this def not fit an at&t tilt 2??
Click to expand...
Click to collapse
This would be perfect for my Tilt 2...any thoughts?
I've read the phones are slightly different sizes...
pimp4cheddar said:
This would be perfect for my Tilt 2...any thoughts?
I've read the phones are slightly different sizes...
Click to expand...
Click to collapse
If they are different sizes, I doubt it would fit, but I'm not sure. I did however find a couple on ebay for the tilt 2. I'm sure you can find some more out there.
http://cgi.ebay.com/NEW-Crystal-Cle...wItemQQptZPDA_Accessories?hash=item5636e89596
dougstoner said:
If they are different sizes, I doubt it would fit, but I'm not sure. I did however find a couple on ebay for the tilt 2. I'm sure you can find some more out there.
http://cgi.ebay.com/NEW-Crystal-Cle...wItemQQptZPDA_Accessories?hash=item5636e89596
Click to expand...
Click to collapse
I saw this one earlier...
I'm actually looking for a black one...and I'm only going to use the back (battery) cover...I hate covers on the front of my phones...
Thanks for the link!
dougstoner said:
Yeah, no problem. My phone is really dirty, but I was in a hurry. Looks really nice I think. I get all kinds of compliments from it.
Click to expand...
Click to collapse
I want a micro sd slot like that
i got the clear one and the brown rubber case...both fit great.
So I replaced the glass part of my rezound yesterday, pretty much successfully.
But now that I have it all together again it is very easy to push the glass to the lcd and make it display those weird colors around the screen. You know what i mean if you have ever pushed too hard on your touch screen, or lcd.
I have been doing some research and I think I was supposed to put something between the glass and the lcd, not sure what though or were to get it...
If someone could let me know weather or not I was supposed to put something between the lcd and glass, and then were i could get it, I would be very appreciative.
Did you replace the old sticky tape that adheres the glass to the lcd panel?
Sent from my ADR6425LVW using xda premium
snow580 said:
Did you replace the old sticky tape that adheres the glass to the lcd panel?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
no... were can I order some and can I still use my phone in the mean time?
Check amazon... And you CAN use your phone, you just might end up with some dead pixels or something probably best to not use it or avoid touching the screen as much as possible
AshtonTS said:
Check amazon... And you CAN use your phone, you just might end up with some dead pixels or something probably best to not use it or avoid touching the screen as much as possible
Click to expand...
Click to collapse
Thanks, can you give me an idea of what to search for? I don't really have any idea what I need.
http://www.amazon.com/Adhesive-Sticker-Digitizer-Supersonic-Incredible/dp/B004WIQW3U/ref=pd_cp_cps_0
Ha ya go
AshtonTS said:
http://www.amazon.com/Adhesive-Sticker-Digitizer-Supersonic-Incredible/dp/B004WIQW3U/ref=pd_cp_cps_0
Ha ya go
Click to expand...
Click to collapse
Thank you very much!
I was looking at the shipping on it and unfortunately its like 2 too 3 weeks. I after googling it i also found some people who said they used super glue, would that be a better option if I am living without anything right now? Or possibly cutting a regular piece of 3m tape? I could probobly get that done today.
gaate said:
Thank you very much!
I was looking at the shipping on it and unfortunately its like 2 too 3 weeks. I after googling it i also found some people who said they used super glue, would that be a better option if I am living without anything right now? Or possibly cutting a regular piece of 3m tape? I could probobly get that done today.
Click to expand...
Click to collapse
I dunno about those methods, I can tell ya this: the roll is HUGE. Big as my hand spread out to fingertips lol. I could send some of my roll if ya want. Otherwise, there should be a US shipper, got mine within a week: "WirelessFinest" in Plano, TX.
PhantasmRezound said:
I dunno about those methods, I can tell ya this: the roll is HUGE. Big as my hand spread out to fingertips lol. I could send some of my roll if ya want. Otherwise, there should be a US shipper, got mine within a week: "WirelessFinest" in Plano, TX.
Click to expand...
Click to collapse
Thanks! That actually should solve my problem, I found them on amazon and its amazon prime so I got next day shipping for a few bucks.
Ill figure out how to aply them and put it on day after tomorrow.
So I was bored last night and decided to take apart my OG. I took pictures of the process (Other than removing the back, sorry!). I mostly took pictures of the mainboard, along with closeups of all of the chips.
Bad news:
- The screen doesn't seem easy to replace at all, I didn't even take it out because there was no obvious way to get it out.
- The battery is stuck to the back of the screen with adhesive tape. I was able to remove it but I had to be very careful.
Here is the URL to the gallery:
bleached45 said:
http://imgur.com/a/ydoJb
Click to expand...
Click to collapse
(Thanks bleached for a link post work around!)
P.S. Once I have enough posts to embed images I will post the high res versions in this thread.
Cheers!
Fow now...
Maybe quoting me in OP will work?
http://imgur.com/a/ydoJb
Very cool. The battery looks really easy to replace. The issue is finding a new one to put in if it ever failed.
Cool pics bro!
Sent from my LG-E970 using Tapatalk 2
Those are cool pictures. I dont think i'd ever feel comfortable doing this to my phone
Thanks! was waiting for these
johnbyebye said:
Very cool. The battery looks really easy to replace. The issue is finding a new one to put in if it ever failed.
Click to expand...
Click to collapse
Well, the good news is it's the same battery as the nexus 4, so as long as we can find nexus 4 batteries we're ok.
taormania said:
Those are cool pictures. I dont think i'd ever feel comfortable doing this to my phone
Click to expand...
Click to collapse
Oh, it was nerve wracking getting it appart, especially getting the back cover off and getting the shielding off of the chips. But it's back together now and still functional! :good:
Damn.... you got balls dude.
I would be terrified to do this to my phone.
So is the back easy to replace then? Like the glass is attached to the part that is removed so if the glass breaks we just get another back? Why can't I find replacement backs anywhere...Ugh
ReconPeon said:
So is the back easy to replace then? Like the glass is attached to the part that is removed so if the glass breaks we just get another back? Why can't I find replacement backs anywhere...Ugh
Click to expand...
Click to collapse
http://www.ebay.com/itm/150951735574?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
He raised the price though. It used to be $36.78.
Man that is a ridiculous price...I hope someone else sells them for cheaper at some point.
ReconPeon said:
Man that is a ridiculous price...I hope someone else sells them for cheaper at some point.
Click to expand...
Click to collapse
Yeah. I wouldn't pay for the glass back at all if it costs nearly half the total value of the phone, lol.
Glad I bought my spare back when it was cheap. With my eBay bucks it was only $20.
Do you think the price will go back down, or we will see more sellers?
nice
Are the camera plugs in these boards compatible with each other? Meaning do you think we could actually put a stronger camera in our phones?
Sent from my Slicked OG
I would love to see a wireless charging mod for the LGOG, really dont understand why it wasnt added to the phone at first place..
the nexus 4 has two more extra connector pins in the back that our phone doesnt have so i guess it isnt a simple mod, also i dont think there is much space to work with.
ReconPeon said:
So is the back easy to replace then? Like the glass is attached to the part that is removed so if the glass breaks we just get another back? Why can't I find replacement backs anywhere...Ugh
Click to expand...
Click to collapse
The back was probably the hardest part to get off, but I was also being really careful not to crack the glass. If you follow the directions on the ifixit nexus 4 teardown you shouldn't have a problem. The plastic opening tools they sell were invaluable. I had never used them on anything prior to opening the OG, and they made the whole process so much easier.
pinkster said:
I would love to see a wireless charging mod for the LGOG, really dont understand why it wasnt added to the phone at first place..
the nexus 4 has two more extra connector pins in the back that our phone doesnt have so i guess it isnt a simple mod, also i dont think there is much space to work with.
Click to expand...
Click to collapse
Yea, the two connectors on the OG are for the NFC antenna that is on the inside of the back cover. I just ordered the parts to try and do the palm touchstone mod on the OG. So I'll post my results if I'm successful. I should only have to modify the the daughterboard (that I didn't take out in the pictures), so the risk is much lower than if I had to modify the mainboard.
whoamanwtf said:
Are the camera plugs in these boards compatible with each other? Meaning do you think we could actually put a stronger camera in our phones?
Click to expand...
Click to collapse
I haven't seen the 13MP camera module connector, but I doubt it would work, primarily due to the difference in the shape of the modules. If you look at any OG version with the 13MP camera you can see that there is a bulge on the phone enclosure where the camera is.
ReconPeon said:
Do you think the price will go back down, or we will see more sellers?
Click to expand...
Click to collapse
Here's some communication between me and the seller:
Dear skystartrade,
Why did you raise the price on this part by $200. That's quite a jump, and it's about half the price of a brand new E970.
- nastybutler77
Click to expand...
Click to collapse
Dear nastybutler77,
We currently do not have this item on hand. We will try and message you if the item is back in our inventory.
Thank you
Jack
SST Trading
Customer Service
Click to expand...
Click to collapse
I guess they're saying they jacked the price up so no one would buy because they're out of stock? Seems like a flimsy excuse to me. But I guess there's hope the price will go back down at some point.
Nastybutler said:
Here's some communication between me and the seller:
I guess they're saying they jacked the price up so no one would buy because they're out of stock? Seems like a flimsy excuse to me. But I guess there's hope the price will go back down at some point.
Click to expand...
Click to collapse
Lol, it says "More than 10 available."
Hi all, I got a good deal on a used z3v(came from nexus 6 just wasn't feeling it much) I love this phone but I have a question the person I bought it from had removed the micro SD and USB flap that makes the phone waterproof (hence the reason I got such a good deal ). My question is where do I buy a replacement I see a replacement flap for the normal z3 on ebay, will it fit the z3v? Or with this phone being so similar to the z2 would i need to order one for that one?
Whoa whoa, that's an awfully terrible thing someone would do to this phone. Removing the flaps is like saying "please let me drive my car without tires and see how this will work".
You would have to get Sony to repair your phone for you because the phone is sealed tight, preventing you from physically modifying it of the sorts.
GigaSPX said:
Whoa whoa, that's an awfully terrible thing someone would do to this phone. Removing the flaps is like saying "please let me drive my car without tires and see how this will work".
You would have to get Sony to repair your phone for you because the phone is sealed tight, preventing you from physically modifying it of the sorts.
Click to expand...
Click to collapse
So the replacement z2 or z3 flaps I see on ebay won't work?
Gcforreal01 said:
So the replacement z2 or z3 flaps I see on ebay won't work?
Click to expand...
Click to collapse
If they are the Z3V Variant then yes those will work. Any other Z2 or Z3 flaps that are not Verizon will not work.
That sucks since even cases for the Verizon variation is hard to find, oh well still a nice phone and I paid next to nothing for it so no worries as even when I had my s5 I never dunked it in water anyways. Thanks for the advice
Gcforreal01 said:
That sucks since even cases for the Verizon variation is hard to find, oh well still a nice phone and I paid next to nothing for it so no worries as even when I had my s5 I never dunked it in water anyways. Thanks for the advice
Click to expand...
Click to collapse
I would be real careful with it though. Anything intruding into your phone can easily ruin it. It looks to me there's next to no protection for anything to enter without the flap. You should get a case that at least covers the exposed areas somehow.
How is that different from any other phone without protective covers on the USB? Not being a smart ass just asking. I have a otterbox defender but annoyingly it doesn't cover the flap area
Gcforreal01 said:
How is that different from any other phone without protective covers on the USB? Not being a smart ass just asking. I have a otterbox defender but annoyingly it doesn't cover the flap area
Click to expand...
Click to collapse
If you look through the side where the micro usb port is, you can see the holes to see the internal where the display lights up. I feel as though dust can easily ruin the quality of the display or ruin the camera lens in the phone from taking great quality pictures.
I got one on ebay. Should be here tomorrow. Shipping was slow but it said it's the original part. Sony would not send me one. They offered to fix my phone for a fee if I mailed them the phone (I didn't get that far so I don't know how much). Here's the link.... Maybe they still sell them. Contact the seller, see what they say... http://pages.ebay.com/link/?nav=item.view&id=131457513807&alt=web
Sent from my D6708 using XDA Free mobile app
Well let us know how the installation goes and how the fit of the replacement is
hexto said:
I got one on ebay. Should be here tomorrow. Shipping was slow but it said it's the original part. Sony would not send me one. They offered to fix my phone for a fee if I mailed them the phone (I didn't get that far so I don't know how much). Here's the link.... Maybe they still sell them. Contact the seller, see what they say... http://pages.ebay.com/link/?nav=item.view&id=131457513807&alt=web
Sent from my D6708 using XDA Free mobile app
Click to expand...
Click to collapse
Depending on how it goes and how difficult it is, if you want to of course..... make a small guide on how to put on those flaps. That might be helpful for some users in the future. Just throwing out an idea.
Bruce Lee said:
Depending on how it goes and how difficult it is, if you want to of course..... make a small guide on how to put on those flaps. That might be helpful for some users in the future. Just throwing out an idea.
Click to expand...
Click to collapse
That's a great suggestion. I don't mind at all and would like to share. From what I can tell in my research, the port is designed like the Z1 and should not be difficult to install.
I just looked at the USPS tracking and my package arrived in Brooklyn NY tonight at 9:58pm. I'm in CT but doubt I'll get delivery tomorrow so it looks like Monday.
I'll be sure to post details. I'm glad to help others. I've sure have been helped more times than I care to admit by others. Besides, I can use some "Thanks" on my profile ?
Sent from my D6708 using XDA Free mobile app
I just noticed mine snapped off some time today. Can't find it anywhere. Really hope this works out for you and that there will be more stock...
Stormwing said:
I just noticed mine snapped off some time today. Can't find it anywhere. Really hope this works out for you and that there will be more stock...
Click to expand...
Click to collapse
Me too. Hope to get it tomorrow. The USPS tracking hasn't been updated since Friday but it was close. Fingers crossed
Sent from my D6708 using XDA Free mobile app
Quick question: anyone know if there's a difference in port cover color between the white and black Z3Vs?
Stormwing said:
Quick question: anyone know if there's a difference in port cover color between the white and black Z3Vs?
Click to expand...
Click to collapse
I doubt it. It's just the aluminum strip that's on the outside that show. Inside isn't different at all.
GigaSPX said:
I doubt it. It's just the aluminum strip that's on the outside that show. Inside isn't different at all.
Click to expand...
Click to collapse
Actually, upon further inspection, I'm positive there's a difference. I found a couple European sites offering Z3V parts, expressly labeled as Black or Silver. Before anyone gets too excited though, none of them have the USB covers in stock.
Display Doktor/World of Mobiles (looks like the supplier from hexto's link)
Magboss.eu
Stormwing said:
Actually, upon further inspection, I'm positive there's a difference. I found a couple European sites offering Z3V parts, expressly labeled as Black or Silver. Before anyone gets too excited though, none of them have the USB covers in stock.
Display Doktor/World of Mobiles (looks like the supplier from hexto's link)
Magboss.eu
Click to expand...
Click to collapse
Seems unlikely that the port cover would be different other than in color. Try chatting with Sony. I did that when I was trying to see if they would sell me the part and they were pretty helpful. I chatted right from my phone using Chrome browser.
My port cover didn't arrive today. So annoying. I'm in CT and the package left Brooklyn, NY at 5:46am on Saturday. It should've been delivered today. Damn 3rd class mail. I feel like I've gotten straight from China packages quicker.
Sent from my D6708 using XDA Free mobile app
Yeah, I just mean the exterior color. Still want it to be the most perfect though. The white definitely has a lighter silver trim, while the black has a darker, slate grayish silver.
Black and White comparison video
My port cover arrived and after about a half hour of failed attempts I figured out how to easily install it without damaging it.
Unfortunately, the damn thing won't fit. It looks perfect but it won't stay closed. I have to press it hard so it closes but it pops right back open on it's own. Nothing like the other ports. I've contacted the seller. Hopefully they will make it right.
I did learn how to install it and will post the video tomorrow. For now, here are two pix showing the ill-fitting cover.
Waited 20 days for this crap ?
Sent from my D6708 using XDA Free mobile app
Hey everyone,
So today I noticed that the black rubber that is under the battery flap of my phone is starting to peel off. It isn't too terrible yet, but I do use the waterproof feature of my phone regularly and I don't want to jeopardize my phone if this peels off. Does anyone know where I can get a replacement cover? I checked eBay and didn't have much luck so I am hoping some of you guys may know of another site that supplies the OEM parts.
Thank you!
mpeclipse03 said:
Hey everyone,
So today I noticed that the black rubber that is under the battery flap of my phone is starting to peel off. It isn't too terrible yet, but I do use the waterproof feature of my phone regularly and I don't want to jeopardize my phone if this peels off. Does anyone know where I can get a replacement cover? I checked eBay and didn't have much luck so I am hoping some of you guys may know of another site that supplies the OEM parts.
Thank you!
Click to expand...
Click to collapse
Yeah a common thing on these phones (USB cover door). I have not found any yet either, AliExpress had some but were pulled or ran out (just checked again they are back now, so AliExpress has them again --
https://www.google.com/search?q=Z3v+usb+cover+&ie=utf-8&oe=utf-8). Better link -- http://www.aliexpress.com/item/for-Sony-Xperia-Z3V-D6708-OEM-SIM-Card-Micro-SD-USB-Charging-Port-Dust-Plug-Waterproof/32430237429.html
I had to take my (wife's phone as well) phone back to VZW and get a replacement phone due to this. If your phone is within the one year warranty go to VZW store and show them they will get you another phone.
I did a test and if you apply a tiny amount of Vaseline on the seal it will work better as well as make a more watertight seal, just lightly coat the rubber seal, good idea to do all doors like that, I have a product called "dielectric grease" that works even better, use sparingly, can get at auto parts store.
So glad this is an easy purchase if I need it. Thanks.
Sent from my D6708 using XDA Premium 4 mobile app
And just like that they're gone, doubt they were genuine OEM anyways
nickmpower said:
And just like that they're gone, doubt they were genuine OEM anyways
Click to expand...
Click to collapse
They went fast! I just checked last night and I was going to purchase one this morning, but I guess that isn't happening.
Still cant believe you can't get these from sony. I don't know if I could trust and off brand copy to be waterproof
nickmpower said:
And just like that they're gone, doubt they were genuine OEM anyways
Click to expand...
Click to collapse
No way! Crap, need to find a well stocked supplier of them. Description said -- Original - Brand New
But it also said -- Quantity: Large in stock
mpeclipse03 said:
They went fast! I just checked last night and I was going to purchase one this morning, but I guess that isn't happening.
Click to expand...
Click to collapse
Sorry, like I said -- they are there, then they are gone.
nickmpower said:
Still cant believe you can't get these from sony. I don't know if I could trust and off brand copy to be waterproof
Click to expand...
Click to collapse
Agreed, Sony should let people have access to their supplier. But then again Sony is greedy and wants the revenue from out of warranty repairs.
I think I may have found the part here: http://magboss.eu/articles.php?currency=EUR&cid=1600
mpeclipse03 said:
I think I may have found the part here: http://magboss.eu/articles.php?currency=EUR&cid=1600
Click to expand...
Click to collapse
Let us know how it goes, it does appear to be the right cover and all but really can't tell without any pictures, those prices are odd (never mind found the USD drop down at top of page) and how long until delivered? EU, can you find out supply level?
1linuxfreak said:
Let us know how it goes, it does appear to be the right cover and all but really can't tell without any pictures, those prices are odd and how long until delivered? EU, can you find out supply level and in US currency cost?
Click to expand...
Click to collapse
Thankfully, I was raised in an Italian household and in Europe, the comma replaces the decimal point. So if something was say $3.50, in Europe, it would be written $3,50.
I did try to order one and to no surprise, they are out of stock. I did find a set of them on eBay though.
mpeclipse03 said:
Thankfully, I was raised in an Italian household and in Europe, the comma replaces the decimal point. So if something was say $3.50, in Europe, it would be written $3,50.
I did try to order one and to no surprise, they are out of stock. I did find a set of them on eBay though.
Click to expand...
Click to collapse
I found the USD currency price at top of page next to the language selector. Says 6.45 - 5.24 USD, there is a difference in USD and EU prices.
Glad you found one on Ebay.
My wife and I visited the VZW store today her usb cover seal tore again and I am still trying to get a good replacement for mine, both refurbished phone VZW sent out were junk, one the camera had a dab of something under glass on the lens and the other one the display was brown in tint or hue, if I don't get a good refurb in the next few tries I am going to just buy a cover and be done with it.
1linuxfreak said:
I found the USD currency price at top of page next to the language selector. Says 6.45 - 5.24 USD, there is a difference in USD and EU prices.
Glad you found one on Ebay.
My wife and I visited the VZW store today her usb cover seal tore again and I am still trying to get a good replacement for mine, both refurbished phone VZW sent out were junk, one the camera had a dab of something under glass on the lens and the other one the display was brown in tint or hue, if I don't get a good refurb in the next few tries I am going to just buy a cover and be done with it.
Click to expand...
Click to collapse
When you get your next refurbished device just remove the flap that you need from it. Just be careful when pulling it out and hold the white connector ribbon really good so that your fingers don't slide down it and rip the cover off (from the white piece).
jal3223 said:
When you get your next refurbished device just remove the flap that you need from it. Just be careful when pulling it out and hold the white connector ribbon really good so that your fingers don't slide down it and rip the cover off (from the white piece).
Click to expand...
Click to collapse
You know I thought of that, but just to darn honest to do that.
Life sucks sometimes for being that honest, but I sleep well at night.
1linuxfreak said:
You know I thought of that, but just to darn honest to do that.
Life sucks sometimes for being that honest, but I sleep well at night.
Click to expand...
Click to collapse
There's nothing dishonest about that at all. They are sending you a replacement phone expecting to get one back without a flap, correct? I bet they would even give you permission if you explain that you aren't happy with the quality of the refurbished devices. The flaps are easily interchangeable without any repercussions.
jal3223 said:
There's nothing dishonest about that at all. They are sending you a replacement phone expecting to get one back without a flap, correct? I bet they would even give you permission if you explain that you aren't happy with the quality of the refurbished devices. The flaps are easily interchangeable without any repercussions.
Click to expand...
Click to collapse
I agree with your logic, and I know the door is easily removed and replaced I have removed and replaced it on my phone several times. The phones are tagged with an identifying number and I bet VZW would be able to detect any deceit, would VZW care? Who knows?
1linuxfreak said:
I agree with your logic, and I know the door is easily removed and replaced I have removed and replaced it on my phone several times. The phones are tagged with an identifying number and I bet VZW would be able to detect any deceit, would VZW care? Who knows?
Click to expand...
Click to collapse
No worries man. I'm glad there are still honest people out there with a conscience. I would suggest you to ask them though so there is no question about what you are doing. I'm fairly certain that they will allow you to. I would ask technical support rather than a normal CSR though. They seem to have more information. I've asked similar questions about refurbs and they are usually willing to do what it takes to make the customer satisfied (within reasonable limits). No harm in asking right?
jal3223 said:
No worries man. I'm glad there are still honest people out there with a conscience. I would suggest you to ask them though so there is no question about what you are doing. I'm fairly certain that they will allow you to. I would ask technical support rather than a normal CSR though. They seem to have more information. I've asked similar questions about refurbs and they are usually willing to do what it takes to make the customer satisfied (within reasonable limits). No harm in asking right?
Click to expand...
Click to collapse
Thanks for the ideas, no sweat off my back yet VZW is the one footing the bill for postage on the refurbished phones.
Got one!
I got a new flap off ebay here: http://www.ebay.com/itm/131518465518?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I received it in 9 days and carefully compared it side by side with a genuine one on a new phone and it appears the replacement is identical and genuine
nickmpower said:
I got a new flap off ebay here: http://www.ebay.com/itm/131518465518?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I received it in 9 days and carefully compared it side by side with a genuine one on a new phone and it appears the replacement is identical and genuine
Click to expand...
Click to collapse
Wow, pricey huh?
Yeah the price has gone up from $9 since I purchased, but still totally worth it. I got some wireless chargers and am only going to use those from now on.