Related
Hi all, pretty new to all this myself, I havent gotten a TyTN yet, but I was wondering if the actual housing on the TyTN can be swapped for a housing like off the O2 or Dopod 838 pro, I like the looks of the other phones better, but would rather avoid qwertz keyboards etc. and get an unbranded phone, I would think the housings interchange, but I am not sure, also even if you happen to have just torn one apart could you tell me if it is too difficult..as in likely to break something, I am fairly good at small electronics repair and such, so I feel pretty competent in tha matter, just thought I would try and check into a few things first.
Thanks
If you're talking specifically to change the button layouts, no. Because the TyTN is based on HERM200, aka HTC Mercury. The O2 trion, 838 Pro and all that other ones with the rounded button pad is based on HERM100, aka HTC Hermes.
Thank you very much for the info, I hadnt realized there was a 100 and 200 yet, I havent been into cell phones long so I'm tryin to learn as much as I can in a very short period, and sorting through all these models can be somewhat crazy at times,
Well you could just get a Dopop 838 pro. The housing is the same as the Trion and it has a QWERTY keyboard. Or you could get a Trion, remap the keys and switch the Y and the Z key.
where can I get a replacement housing??
silly quesiton..
Im not a fan of leather pouches etc, and in the past with my nokias I've simply used the phone for a while and then replaced the housing with a new one.. i realise this doesnt protect the screen/etc . but it works for me.. Where could I get a new housing from??
Angelo
Hi, like I said above, I havent been into this stuff for long, but unless you get a housing from HTC directly, or one of the other maunfacturers, being so early I doubt you would find any on ebay, I'm still on the lookout for just an aluminum case myself, http://forum.xda-developers.com/viewtopic.php?t=58505 I hate leather cases, and my luck, I would lean against something and jab the screen through my jeans, if I dont have it protected.
If you do find any housing would you please post back, I'm seriously thinkin of tearing mine apart, and possibly modding the housing, and also I'm thinkin the button arrangement is on a different PCB that just connects to the main board with a socket or cable, that way they arent having to produce two different lines of main/motherboards, I could be wrong about the board arrangement, but if its seperate, then the 100 and 200 housings should swap, this is all just me thinkin and guessin, I have only been into moddin pc's.
Phame: I have been goin back anf forth between the ecact same thought, I do like the looks of the Dopod and Trion better, but I notice the buttons on the front call/end etc are slightly raised which could cause me to hit them accidentally a bit more, and in one review I read that the TyTN were some what more user friendly, I just finally told myself to snag the TyTN, once it get scratched or something, I'll just take it apart, and have one of my friends with an airbrush make it look good,
Hey guys,
My white unlocked Hero has sustained some nasty body scratches plus it is starting to turn yellow. I'm considering a full body replacement. I was only able to find this:
http://cgi.ebay.com/GENINUE-HOUSING-FACEPLATE-FACIA-GOOGLE-G3-HTC-
HERO-WT_W0QQitemZ280402919652QQcmdZViewItemQQptZPDA_Accessories?hash=item41495100e4
Do you think that it's going to be as good as the original one? The seller claims that it's genuine, What do you think?
I found a site that has both the black and white housing for the gsm hero.
http://www.truesupplier.com/faceplate-housing-cover-for-htc-hero-g2-touch-white-color-pr-18489.html
How do I know that it's genuine? or at least as good as the original HTC cover?
slimfady said:
How do I know that it's genuine?
Click to expand...
Click to collapse
The web page is called "truesupplier.com". OF COURSE its genuine
How hard is it to change the housing anyway?
by changing housing you will probably break phone trust me ... and truesupplier housing is oem not genuine by looks of it..
He might not break it if he's careful, and has the proper tools. I've taken apart a few phones without causing any problems.
So unless i'm handy at doing these things, I should not do it myself?
What if I have our local HTC agent do it? Will it at least look as good as new?
i have the white hero and would love to put the black case on it.
the site mentioned above says it comes with the tools needed to change the cover, has any tried doing this?
i would love to go for it but don't want to f*&k my phone up!
i think its not so difficult to switch the cover if you take off the backcover there are 6 screws than open the case from the top of the mobile phone and pull it off
but becarefull maybe there are flatcables from die lcd or the trackball just make it slow and be carefull all the time
and maybe you can find a dissembly how to in google
peace
this site has pics of disassembly of a hero but it's in russian.
http://www.pdacenter.ru/razborka/htc_hero/
If you have to pry the phone open use something plastic so you dont damage the original case. Just in case the ebay housing is rubbish.
hawwy said:
by changing housing you will probably break phone trust me ... and truesupplier housing is oem not genuine by looks of it..
Click to expand...
Click to collapse
whats the difference between oem and genuine
any1 bought replacement white hoising? mine is getting yellow. so need to buy a back cover.
Thinking of buying one myself. I accidentally dropped mine on the tiled floors of my workplace toilets LOL (luckily not IN the toilet). so now there's a little nick on the top left corner of the case.
If this is your first time you will probably scratch the covers but nothing more. You need to be very patient and i will suggest take a look to a good tutorial.
iopened my hero 1 week ago and its so easy maybe in the next days i will upload a video in youtube
bye
I bought the ebay one. It's surprisingly well built (Not Teflon though).
The sad part is that my touch screen got screwed up during the installation. The bottom part of the screen is no longer functional and the sensitivity is messed up overall. Did the replacement in a local phone shop.
Now trying to find a way to fix it.
gyounut said:
iopened my hero 1 week ago and its so easy maybe in the next days i will upload a video in youtube
bye
Click to expand...
Click to collapse
That would be greatly appreciated!
hmm do you want to sell me your backplate of your old case? i need it please
and to fix your problem : you need a new display glas with digitizer
to remove your old glas: use a hairdryer, you have to heat up the old clue of the old glas and than you can push it easily out of the frame but be carefull not to heatup the frame, the plastic can deform, maybe you can cover it with aluminium foil from the kitchen
the video of the dissembly will be uploaded tomorrow by me
good night guys!
slimfady said:
I bought the ebay one. It's surprisingly well built (Not Teflon though).
The sad part is that my touch screen got screwed up during the installation. The bottom part of the screen is no longer functional and the sensitivity is messed up overall. Did the replacement in a local phone shop.
Now trying to find a way to fix it.
Click to expand...
Click to collapse
Where can I find new display glass for HTC hero? or can I just buy something generic?
I don't mind giving you my old backcover though it's in a very bad shape (which is why I wanted to replace it in the first place).
Hi,
I would like to ask if anybody know where i can fing full housing for my touch2. i have drop the phone and break the corner so i need to replace it. I don't know if this is possible or if i have to replace also the touch part.
Please if anybody knows i will apriciate it.
Thanks a lot
Full Housing
Hi There you can actually buy full housing kits from ebay, but use caution when or even if selecting as some may be cheap copies and won't fit exactly.
I had this problem with a Uni case and ended up having to trim bits off to get an exact fit.
PLEASE CHOOSE WISELY
HTC Mega Full housing costs around 40 pounds on E-Bay ... as for now ... too expensive , maybe it'll go down when time goes by and sellers start to compete each other ... the phone isn't old enough to have the housing at low price ...
LtBlue said:
HTC Mega Full housing costs around 40 pounds on E-Bay ... as for now ... too expensive , maybe it'll go down when time goes by and sellers start to compete each other ... the phone isn't old enough to have the housing at low price ...
Click to expand...
Click to collapse
Also if you do dissassemble take care with the volume PCB that's got a soldered ribbon to the mainboard. I've torn mine changing a digitiser :-(
M.S
Hello guys my houseing cover is almost gone. volume button broke and ...
I went to HTC customer service to change but they said it cost about 120 $ which is alot!
i found this thing in ebay
ebay.com.my/Original-Housing-Cover-HTC-Touch-Diamond-2-II-T5353-/120435595689?cmd=ViewItem&pt=PDA_Accessories&hash=item1c0a8559a9
it claims it is original but the problem is how can i put it in! isnt it dangruse the htc support talked very scary! so i am afraid if i hurt the phone!
and another thing is it any full house cover like that matte battry cover i mean with a better material ?
thank you
digitalmahdi said:
Hello guys my houseing cover is almost gone. volume button broke and ...
I went to HTC customer service to change but they said it cost about 120 $ which is alot!
i found this thing in ebay
ebay.com.my/Original-Housing-Cover-HTC-Touch-Diamond-2-II-T5353-/120435595689?cmd=ViewItem&pt=PDA_Accessories&hash=item1c0a8559a9
it claims it is original but the problem is how can i put it in! isnt it dangruse the htc support talked very scary! so i am afraid if i hurt the phone!
and another thing is it any full house cover like that matte battry cover i mean with a better material ?
thank you
Click to expand...
Click to collapse
Sorry, but I could'nt find the ebay item in your link.
Don't worry about disassembling your Diamond2: I'm not a professional and I could do it without any problem (just a little bit of sweat )
This is a link to a video with the steps to disassembly the D2
http://forum.xda-developers.com/showthread.php?t=715724
but what about the quelity of the frame can you show me some original framez on ebay
digitalmahdi said:
but what about the quelity of the frame can you show me some original framez on ebay
Click to expand...
Click to collapse
Hi,
I bought my housing + touch screen by ebay.
Put "Housing Cover+Touch Screen for HTC Diamond 2 II T5353" in the search box. I bought it to g-plustrading and the quality seems to be the same as the original (well... not the same: I just had to put some extra glue in the metal piece around the cam...)
I have a cracked and scuffed touchscreen on my x10 and for $30 on ebay I was going to replace the screen. My concern is that I can get ones from China for half the price of the USA and some say 'Grade A no bubbles' but others do not, are these quality screens from China or will I be diasspointed?
Has anyone had a bad experience replacing their touch screen with the Chinese products? They say OEM but are they from Sony or are they knock offs and is there build quality concerns using the cheap ones?
in my opinoin when it comes to electronics , especially from china, you get what you pay for, id rather pay a little extra knowing that it will be ok
Agreed. With china there's a 99% chance that what you are buying is not OEM. Likely it's very cheaply made.
Yeah I hear ya... that is probably exactly what I would had replied to this post if someone else asked the same question.
I was really hoping someone would tell me that they bought a screen from XXXXX on ebay and it was better then the original but I guess I need to decide if I want cheap or quality.
I've already replaced the phone with an HTC EVO 3D but there is alot of life left in this X10 and it is a great platform for hacking and learning android. Plus they make awesome tiny tablets for around the house.
Thanks for the input.
I got white replacement from china which is quite good.. I won't say its authentic, but here in the UK most replacement dealers get there stuff from china anyway.
Buying from China is like cutting out the middle-man, the down side is just you need to wait.. And if you think they are not what you think your money's worth, you could always tell them you did not receive the item and get your refund.
try to buy from best sellers only...otherwise nothing is guaranteed.
Omar.
Hello guys, I operate from China is not good, shipping times are very long, why not order from Germany or thereabouts? I ordered this screen protector from Germany and arrived in 3 days, I am very well, without delays or other touch ... Regards, Joseph
Night1987 said:
Hello guys, I operate from China is not good, shipping times are very long, why not order from Germany or thereabouts? I ordered this screen protector from Germany and arrived in 3 days, I am very well, without delays or other touch ... Regards, Joseph
Click to expand...
Click to collapse
Because chinese sh!t is cheaper then German sh!t?
Globalshining
Maybe i'm the lucky one, bought one from globalshining on ebay for 20 Euro and thought: well if this aint gonna work, it;s 20 euro's thrown away. But here in my town (germany) they ask 80 Euro for it. After 8 days!!! I received the piece: fitted perfectly but it was at least one hour work to get the overly scratched old one of and the new one on. I did search google for disassembling instructions for the X10 and found one with lots of photo's. Without these instructions, you easily brick your phone.
Regarding GlobalShing: its on ebay, or eshoptradehk dot com I first checked the ebay ratings: then decided to do so..
But do get your own screwdrivers cause the one from China dont fit at all....
Cheers
hey could someone help me with a link?
i just cracked the front screen on my fone and i need to replace it. would like to replace the whole screen and case.
i googled a few, but i was not sure if they included the front screen cos its the front screen thats cracked.
then i also learnt that the touch module is glued to the front glass screen, will the new case screen also have one attached to it or would i have to remove this one and stick it to the new one?
4llerbuntu said:
hey could someone help me with a link?
i just cracked the front screen on my fone and i need to replace it. would like to replace the whole screen and case.
i googled a few, but i was not sure if they included the front screen cos its the front screen thats cracked.
then i also learnt that the touch module is glued to the front glass screen, will the new case screen also have one attached to it or would i have to remove this one and stick it to the new one?
Click to expand...
Click to collapse
i just cracked mine too, I just ordered a new digitizer from ebay for $20. I think thats all we need to fix the cracked glass. Anyone know if this is right?
thats right.
Hey i found those---> http://stores.ebay.com/gadgetfix/Sony-Ericsson-/_i.html?_fsub=1408041015 and http://www.ebay.com/itm/Touch-Digit...-XPERIA-X10-BLACK-/170720772774#ht_4581wt_989 and the last one http://www.ebay.com/itm/SONY-ERICSS...-screen-digitizer-/320603153459#ht_2960wt_952 .Which one should i buy?I want to sell my X10i and buy an LG Optimus 3D so i think to make a little touch-ops.Can you give me an advise?I want to make from my old 1 year old xperia a nice and new looking phone.So it will be worth the money.
Well I'm still looking for a good replacement. I've done plenty of reading and research but I'm not sure which way to go.
Has anyone done a digitizer swap? What was the end result? Were you happy or did it brick your phone?
Any opinions would be nice to hear.
Thanks.
put a super amoled display from the SGS in it
Hi, I cracked my digitiser VERY badly, so I was forced to replace the digitiser... The LED was slightly scratched because of the drop, but I don't mind, it's hardly noticable. I took the phone apart like 3 times:
1 - taking it apart
2 - power button i forgot to put back
3 - had a little of $h!t under the digitiser
Has anyone done a digitizer swap? What was the end result? Were you happy or did it brick your phone?
Any opinions would be nice to hear.
Thanks.
Click to expand...
Click to collapse
I swapped my digitiser, and so did XDA Recognised Developer for the x10 pvyparts and none of our phones were bricked, it worked perfectly after... Took about 20min to do, I did it during school break because I was bored...
Goodluck!
Better you replace the phone, you don't know the quality that Chinese product
i have tried a couple of different touches an for me so far all of them has been a bit of a dissapointment, the touch works good but the fit is bad. Sensors, proximity particularly, gone bad. sry for really bad eng.
i got my digitizer from ebay china its was pretty good get it with the housing black or white much better then trying to sick the digitizer on the old housing paid around $30 au
i guess at the end of the day all these parts are made in china oem or not