[question][WM6.5]bluetooth apps - Windows Mobile Apps and Games

i want to ask if there is any application that can alter the receiving directory of the bluetooth like the apps called DrYAR-Bluetooth?
i find the DrYAR-Bluetooth cannot work on my WM 6.5.
is there any apps that can perform this feature and workable for WM 6.5
thanks~

search for OBEX inbox.

RAMMANN said:
search for OBEX inbox.
Click to expand...
Click to collapse
thx for your reply~
i have already tried it but it doesn't work on my device
anyway,thx~

finally, i find the Persian Blue 2.1 works well in my devices~
Now, i can choose the sd card for receiving my file via bluetooth~
thx all~

Related

Hi can i install tomtom5??

The installer crash when it is going to copy the files and if i copy ttn.cab and i tap it the result is "Instalation of ttn.cab was unsuccessful. What can i do? thanks
magneto
I am using Mangeto....
Hi dherrero,
I had the same problem and downgraded to WM2003SED.
With WM2003SE it works perfect
I dont want to downgrade and tomtom 4.40 works well with magneto. What is happening??
I don't no.
Because i can't figured it out and i need TT i downgraded to WM2003SE.
When somebody knows that it wil work i upgrade again.
Maybe others can help you. :?:
Good Luck
You can copy the files out of the cab files and manually place them in the required directories, here a list of the files from the (ttn.cab) and where they go
Program Files\Navigator\data.chk
Program Files\Navigator\TomTom Navigator.exe
My Documents\TomTom\CurrentMap.dat
I use WinCe Cab Manager to extract the files
Hope this is of soem use!
Dogo
Thanks It works...
Activation Codes for Tomtom5 UK map
anyone have a code or work around for this??
How do you get tt5 to recongnise you have another map on the SD card???? anyone ????
It must be a map specific for tomtom5.0. Older maps doesnt work in tomtom5
Tomtom5 crashes continuesly..
And when Tomtom is installed and I want to sync my device in my cradle, device.exe en gwes.exe will crash also and need to softreset before sync will work again.
I deinstalled all tomtom components, and sync'n will work flawlessly... but after unpacking the cab files and start Tomtom Navigator.exe I'll get the same problem again..
In which order did you install the cabfiles?
edit: Older maps seem to work with tomtom5; all you need to do is edit the apn file in the old map folder and change the last number (map version) to the version of the tomtom5 you've got.
can't select voice, although i installed several voice cabs...
tom does not recocnize the voice file, but it is there (\tomtom\dataXX)
voice does work on wm2003
tomtom 5.0 crashes
Yes, tomtom 5.0 crashs sometimes. In my case, when i try to manage witch poi's categories to see in the map the sometimes it crash. I dont know if the problem is magneto or tomtom 5.0 but tomtom4.4 worked well. I hope tomtom releases a fix....
Bstard said:
can't select voice, although i installed several voice cabs...
tom does not recocnize the voice file, but it is there (\tomtom\dataXX)
voice does work on wm2003
Click to expand...
Click to collapse
hi, all
same problem as Bstard
@Bstard
have you solved ?
Regards.
tomtom 5 solved
i've heard that you can copy tomtom 3 poi.dat from old map to the new one, and although you don't get the new pois stability problems go away.
voice files cab install
dogo said:
You can copy the files out of the cab files and manually place them in the required directories, here a list of the files from the (ttn.cab) and where they go
Program Files\Navigator\data.chk
Program Files\Navigator\TomTom Navigator.exe
My Documents\TomTom\CurrentMap.dat
I use WinCe Cab Manager to extract the files
Hope this is of soem use!
Dogo [/quote
What about the voice fies? How to install?
Click to expand...
Click to collapse
Re: voice files cab install
What about the voice fies? How to install?
Working on this, but for the life of me i cant get TomTom to see any voice files
Dogo
Re: voice files cab install
dogo said:
What about the voice fies? How to install?
Working on this, but for the life of me i cant get TomTom to see any voice files
Dogo
Click to expand...
Click to collapse
Ok got mine working heres what i did!
I Copied data05.chk & engf.vif to My Device/My Documents/TomTom
All working fine now, I Had no luck with the ROM Version 1.50h.00WWE, TOMTOM Kept crashing, now using ROM Version 1.50g.00WWE
Now looking for a fix to the backlight keeps switching off
dogo
Voice solution for tt5
Just create the Voices folder in mydevice and copy the voice files here :lol: :lol:
ciao
TTN5 using older maps...
Krypt,
You say all you need to change is the pna file? I have some TTN2 USA Maps and have changed the .pna file to 562 and it still only finds my Great Britain TTN5 map.
Any advice?

Aku3-Rom (WWE) and Planet3 (Austrian 3 Hutchinson)

Before I flashed the new Test-Rom (Aku3.3 - i had the original MDA-VarioII-Rom from TMOB Germany) I was able to log in to Planet3/3-Homezone with the trick, that I changed Registry-values to say the 3-server, that I´m with a NokiaN70-phone and not the HTC-Hermes.
With flashing the new rom the Registry-Changes take no effect...
Has anyone an Idea?
Changes to be made:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Internet Settings\5.0\User Agent]
@="NokiaN70"
Seite: http://mobile.drei.at/hb/NokN70/HutchKey
same roblem here.
The problem is: The User Agent of the Pocket Internet Explorer isn't sent with the URL-Request.
Is a bug of the PIE.
Has anybody a solution?
Sorry, which bit of Planet3 can't you access using the default settings? I'm able to do pretty much everything with the default settings, I'm currently running XDA Live 0.20.1 on 3 Australia in Melbourne.
KevinBaker said:
Sorry, which bit of Planet3 can't you access using the default settings? I'm able to do pretty much everything with the default settings, I'm currently running XDA Live 0.20.1 on 3 Australia in Melbourne.
Click to expand...
Click to collapse
But he´s not from AUSTRALIA, ---> AUSTRIA...
I have the same problem...
3 Hutchinson Austria doesn´t support WM5/6... cause they don´t have HTC-mobiles to sell... so you only can connect with this trick to let them believe you´re on an supported phone....
tosstasny said:
But he´s not from AUSTRALIA, ---> AUSTRIA...
I have the same problem...
3 Hutchinson Austria doesn´t support WM5/6... cause they don´t have HTC-mobiles to sell... so you only can connect with this trick to let them believe you´re on an supported phone....
Click to expand...
Click to collapse
Err.... well its late and I'm very tired . Sorry
Idea?
Has no one an idea, how to set up die PIE?
tosstasny said:
Has no one an idea, how to set up die PIE?
Click to expand...
Click to collapse
I have the same problem with 3 Hong Kong. I downloaded the technical preview of Netfront 3.4 and there U can set the user agent as :
Nokia6680/1.0 (Symbian OS/8.0 ;Nokia; Series60/2.06)/Netfront3.3
Everything works now except Streaming Media and video download. I tried using Dopod838pro/mozillia/4.01 before..but I have problem access text news. However, I could get the link of streaming video and copy the link to stream player myself to play the video. Since I don't watch video much, I just use the user agent that works with text news best. I am sure you can find a better user agent setting. I just use the first one that works for me.
Thänx alot...
Busstop said:
I have the same problem with 3 Hong Kong. I downloaded the technical preview of Netfront 3.4 and there U can set the user agent as :
Nokia6680/1.0 (Symbian OS/8.0 ;Nokia; Series60/2.06)/Netfront3.3
Everything works now except Streaming Media and video download. I tried using Dopod838pro/mozillia/4.01 before..but I have problem access text news. However, I could get the link of streaming video and copy the link to stream player myself to play the video. Since I don't watch video much, I just use the user agent that works with text news best. I am sure you can find a better user agent setting. I just use the first one that works for me.
Click to expand...
Click to collapse
Works perfect, but I can´t get the videos running....
Maybe somebody who uses the XDA Live ROM can zip the hidden system-files (4 files) which are starting with IE in Windows-directory. Then I can move them to my ROM with a proggy, and the Bug is away!
You will need the 3MobileTVonWM5Device.zip from Up/Download-Area after registering at http://www.umtslink.at/3g-forum
THE PROB WITH THE STREAMING PLAYER: SAME PROBLEM WITH 3 IN AUSTRIA, BUT I SOLVED THIS PROBLEM LONG AGO.
First you need to get the 3-Page running on your TyTN, then
(Who already has HTC Stream Media installed can start at Point 3)
1. copy the files from 3MobileTVonWM5Device.zip to /Windows on HTC TyTN
2. copy the StreamingVideo.lnk to /Windows/Start Menu/Programs
3. install 838Pro_Streaming_v210.cab to Device-Memory on HTC TyTN (XDA Trion,....)
4. Soft reset
5. open Streamingplayer in Programs and as Connection set the 3-Internetconnection
6. 3Planet MobileTV Link works.
PAPPL said:
Maybe somebody who uses the XDA Live ROM can zip the hidden system-files (4 files) which are starting with IE in Windows-directory. Then I can move them to my ROM with a proggy, and the Bug is away!
You will need the 3MobileTVonWM5Device.zip from Up/Download-Area after registering at http://www.umtslink.at/3g-forum
THE PROB WITH THE STREAMING PLAYER: SAME PROBLEM WITH 3 IN AUSTRIA, BUT I SOLVED THIS PROBLEM LONG AGO.
First you need to get the 3-Page running on your TyTN, then
(Who already has HTC Stream Media installed can start at Point 3)
1. copy the files from 3MobileTVonWM5Device.zip to /Windows on HTC TyTN
2. copy the StreamingVideo.lnk to /Windows/Start Menu/Programs
3. install 838Pro_Streaming_v210.cab to Device-Memory on HTC TyTN (XDA Trion,....)
4. Soft reset
5. open Streamingplayer in Programs and as Connection set the 3-Internetconnection
6. 3Planet MobileTV Link works.
Click to expand...
Click to collapse
The only thing is, that the 838Pro_Streaming.cab won´t install.
Did you try the cab from the zip file?
On my XDA Trion it installs normally and then it works
.CAB install
PAPPL said:
Did you try the cab from the zip file?
On my XDA Trion it installs normally and then it works
Click to expand...
Click to collapse
On my VarioII I get an error when installing (permission...), I´m on XDA-Live 0.20... before (Aku 2, Aku 3.3) the installation worked....
EDIT: VERSION4 of UA Pocket Internet Explorer
Now the User Agent change works again with WM5 AKU3.3+ and WM6.
More details see: http://forum.xda-developers.com/showthread.php?p=1198850#post1198850
PAPPL said:
Now the User Agent change works again with WM5 AKU3.3+ and WM6.
Unzip the Package and copy the files to your Windows-Directory on Hermes.
On Overwrite-promt tap yes.
Then change for 3-Austria the User Agent in Registry to:
[HKLM\Software\Windows\CurrentVersion\Internet Settings\5.0\User Agent]
(Default)= SonyEricssonW850i/R1EL Browser/Netfront/3.3 Profile/MIDP-2.0
The old User Agent String doesn't work for some reason. (?)
Planet3-AT-URL:
http://mobile.drei.at/hb/homebase/HutchKey
MMS still working.
Tested on english ROM, german ROM should be sopported too.
Click to expand...
Click to collapse
Works great, thänx a lot. Great work. While posting in 2 diffrent forums *gg* such a perfect solution.
Look: I edited post #13
hello my friend
I had the same probleme like you!!!!!
But now, not anymore, hehehe. I red with great interests your posts in the other forum and than here.
You help me a lot, thank you very much. I think [/B]you and a lot of these guys here, are very professional.
Without your help, I am sure, I sit with my hermes and I will not be lucky - because a lot of my problems does not be solved.
once more, thank you, morf
sorry, for my bad english
Does it also work on the trinity ?
When i copy the files in the windows-directory on my htc the internet-explorer doesn't start any more and the htc hangs.
Only a reset helps.
See posting #13: Flexible User Agent PIE V2 released
If you installed the first Release, simply select the overwritten files in Windows-directory and delete them, the original ones from static ROM will be replaced automaticly. Then install the two files from new zip, and smile.
For more info see post #13
I unzip the file and copy the resulting files to storage card in phone and then inside the phone through "File Explorer" copy that two files to folder under Windows, I got the following error message.
Pls advise if the method to copy file is incorrect or is there any method to solve this problem. Thanks.
Cannot copy "browser" : Access is denied.
Hi,
I can browse all the contents & see all streaming after changing the registry and overwriting both the browser dll and webview dll files under phone windows directory( from the zip file)
But it created another problem.... I cannot open any sms message or write any sms after the change .
I used the spb backup (ghost) and I have no problem at sms again, then I only overwritten the browser dll only to the phone windows directory ( did not overwrite the webview dll) , it now works for both sms and IE browsing !!!b

WM6.1 UC Korand 3.1

This is essentially the excellent Korand 3.1, but with UC compatibility, enabling easier switching between ROMs.
UC info
UC allows customization using a storage card, and so allows for completely individual customization of any UC compatible ROM.
Without a storage card, this should run as it normally does.
For info on UC look here!
I'm currently working on a Touch Edition. I have a beta version I'm uploading. If anyone wants to test it, I'll post the link here.
Upgrade guide:
README
Dowload:
rapidshare
SkyDrive
TE beta 1
Thanks to:
Korand for the base ROM here
Sleuth255 for UC here and here
good to make UC compatible..
Good job ..
yup thanx for this useful post
i was wondering if i could find the wm6 uc compitable rom
Thanx
If you get any problems with UC please tell me so I can sort them... Or at least try to.
Thank you very much!
does this work for G3 and G4?????
I am interesting in the Touch ROM! Is this also based on the Final version of WM6.1?
does this work for G3 and G4?????
Click to expand...
Click to collapse
Should do. You need to download the update utilities linked in the How To.
I am interesting in the Touch ROM! Is this also based on the Final version of WM6.1?
Click to expand...
Click to collapse
It will be based on the same ROM, but with extra features like the cube.
l3v5y..
What here is, is not final version from Cloudyfa..
He has already dump the other one from kaiser.. And solved this WPA 2 problem..
But need to fixed something on SD Card bugs..
I downloaded the Touch ROM and I flashed it succesfully.
But during the ROM customization progress it is stuck on 'running SDautorun.exe' and does not continue anymore. I waited for about 30 minutes and soft resetted my device. The device starts, but now I have a very clean ROM (no sign off any Touch items).
Can anybody help me with this problem?
There are two reasons for this:
I didn't add a security pack that allows certain (unsigned apps) to be used.
The initflash file (what places shortcut files in the right place) was not edited properly and so shortcuts to apps are not in the correct place/not there at all.
hi l3v5y,
Happened to me the same thing. I can confirm that the shortcuts in my case are correct.
Questions:
1 - can I choose diferent folders for the cabs?
2 - Is the program case sensitive?
best regards
RP
For info on UC, see this http://forum.xda-developers.com/showthread.php?t=366337 if that fails to answer your questions I shall try to answer them myself.
I've been trying for more then a week now to get my next rom UC but it just will not work so any info on how you got it to work would be grate
does anyof it work? does sdautorun.exe start?
l3v5y said:
does anyof it work? does sdautorun.exe start?
Click to expand...
Click to collapse
yes it starts but does not end installing I tried putting the SDautorun on my sdcard and run it gives an error that it's not signed
gullum said:
yes it starts but does not end installing I tried putting the SDautorun on my sdcard and run it gives an error that it's not signed
Click to expand...
Click to collapse
It might need to add a key setting in reg:
SDAutoRun is not signed so security must be relaxed in HKLM\Security\Policies\Polices by setting the value 0000101C to a 1
check:
http://forum.xda-developers.com/showpost.php?p=1896885&postcount=1
ufriendxda said:
It might need to add a key setting in reg:
SDAutoRun is not signed so security must be relaxed in HKLM\Security\Policies\Polices by setting the value 0000101C to a 1
check:
http://forum.xda-developers.com/showpost.php?p=1896885&postcount=1
Click to expand...
Click to collapse
I did that but might have goten it lost again because I've changed lost of stuff I'll check it again and thanks
I had that happen, but at some point when importing a package, the error stopped.
If you take the SD card out, and then wait after a hard reset, it should reset.

Don't delete the cabs

This is bugging the heck out of me.
On my WM 6.1 roms this fix is implemented but i have yet to see it in the smartphones. Is there a way?
I would like to keep an install cabs directory on my wife's micro sd but i can't seem to find a way to stop it from deleting the cabs after i install them.
(I may just not be wording my searching correctly but any help would be appreciated)
Mine stay put after install. Check your registry key named nDynamicDelete @ HKLM\Software\apps\Microsoft Application Installer\
Mine has a value of 2. You can also use CabInstl instead and have the option to select where to install and when to delete or not.
h4waii said:
Mine stay put after install. Check your registry key named nDynamicDelete @ HKLM\Software\apps\Microsoft Application Installer\
Mine has a value of 2. You can also use CabInstl instead and have the option to select where to install and when to delete or not.
Click to expand...
Click to collapse
Thanks... I'll check tonight on her phone. Mine also do with WM6.1 PRO on my wizard, but hers do not with gnatgosplat's star trek wm6.1 rom.
ROCOAFZ said:
Thanks... I'll check tonight on her phone. Mine also do with WM6.1 PRO on my wizard, but hers do not with gnatgosplat's star trek wm6.1 rom.
Click to expand...
Click to collapse
Let us know how that goes but also you can change
HKCR\cabfiles\shell\Open\Command\(default) = \Windows\wceload.exe "%1"
TO
HKCR\cabfiles\shell\Open\Command\(default) = \Windows\wceload.exe "%1" /nodelete
Thanks!
JZ
ROCOAFZ said:
This is bugging the heck out of me.
On my WM 6.1 roms this fix is implemented but i have yet to see it in the smartphones. Is there a way?
I would like to keep an install cabs directory on my wife's micro sd but i can't seem to find a way to stop it from deleting the cabs after i install them.
(I may just not be wording my searching correctly but any help would be appreciated)
Click to expand...
Click to collapse
Just make your cabs "read only" and then they won't get deleted. No registry edit required.

[WVGA] Jmz Manila Playlist Backup V1

Jmz Manila Playlist Backup V1​
This is my latest project. Manila playlist backup. It was tested with Sprint stock Manila 2.5. Please let me know if there are any incompatibilities with other versions.
You must end the process Audiomanager_eng.exe and disable manila for this to work. Still researching on how to kill those two automatically. Should work perfectly after that.
If you have any issues please post at the forum you came from. This is only an EXT for now as I cannot create cabs at the moment. Feel free to create one and post it.
Thanks goes to michyprima for his manila sdk.
Download​
Hi jmztaylor,
where i have to copy the single files? Please an advise for me. Then i will create the cab file for you....
mike2nl said:
Hi jmztaylor,
where i have to copy the single files? Please an advise for me. Then i will create the cab file for you....
Click to expand...
Click to collapse
the exe and dlls go to "\Program files\Jmz Software\Jmz Manila Playlist Backup\". The shortcut goes to "\Windows\Start Menu\Programs\Tools"
Thanks
Hi jmztaylor,
cab file is done and the installation is working, but.....
1. In the program (start) menu there is no icon from the app.
2. An error occours when i use the button export. Please see screenshots.
The top text in the screenshot is in dutch. He means that the app is closed because an error.
So far at this moment. I hope you can work further with this info.
mike2nl said:
Hi jmztaylor,
cab file is done and the installation is working, but.....
1. In the program (start) menu there is no icon from the app.
2. An error occours when i use the button export. Please see screenshots.
The top text in the screenshot is in dutch. He means that the app is closed because an error.
So far at this moment. I hope you can work further with this info.
Click to expand...
Click to collapse
the reason for that is that audiomanager_eng.exe was not ended, and manila wasn't disabled. You must manually do both for the current version of this app
Ok, i will test it again and report later. Thanks for the advise.
Can't understand where backup is saved... Ideally would be on storage card to reimport after a flash...
dagosjt said:
Can't understand where backup is saved... Ideally would be on storage card to reimport after a flash...
Click to expand...
Click to collapse
/Storage Card/Playlist Backup. It is first release so it is hard coded. The next version will be dynamic.
It's ok! Simply I didn't see it
Next ROM Flash let's see if restore really work
Thank you!
Thanks for this app.
Restored successfully after initially receiving NetCF 3.5 error.
Great work!
can someone please attach the file. I don't have a gmail account and dont want to get one but would like to try this app, thanks.
Please help
To the developer / OP...
I had to have my phone replaced.
I ran the backup just fine on my old phone.
I went to run the restore on my new phone and I just get an error msg (see screen shot).
I have Sense turned off and have confirmed that that audio manager process is not running.
Please help!

Categories

Resources