PortGo for Windows Mobile 6/6.5 V1.3
PortGo is the newest free softphone application from PortSIP, it's built base on PortSIP VoIP SDK, allowing users to enjoy multimedia communications in a dynamic way.
PortGo works seamlessly with your internet connection – you can chat away with free calls and never worry about cost, time or distance. It including great features to help you stay in touch with friends, family and co-workers, share your thoughts and views and find the information you need. You can use it on your PDA
PortGo is a VOIP softphone that running on Windows Mobile 6.0/6.5, allows you to speak with any other softphone , any stand-alone IP-phone, or using Internet Telephony Service Provider (ITSP) with any traditional wired or mobile phone. It supports SIP and is fully inter-operable with most major VOIP vendors and ITSPs.
Standard Features
Support platforms: Windows Mobile 6/6.5
Support Device Screen: QVGA(320*240),VGA(640*480),WVGA(800*480)
Support servers: Cisco CallManager, Open SER, SER, Asterisk, Portaone, Radvision, Nortel, Rainbow, Avaya and other SIP Platforms.
Switch between earpiece and load-speaker(Does no support some devices, likes Samsung I708)
Audio call: G.711 aLaw/uLaw, GSM
Call transfer: Blind transfer
Call hold, mute speaker, mute microphone.
Audio record: record audio as wave file.
DTMF support: Send DTMF tone(RFC2833 and SIP INFO method), detect DTMF tone(RFC2833 and SIP INFO method).
Silent Ringtone
Audio conference
Acoustic Echo Cancellation
Automatic gain control
Comfort Noise Generation
Voice Activity Detector
STUN support
Bluetooth headset support
Outbound proxy server support
Jitter buffer
Customization SKIN,Default support:CIF(240*320),HVGA(240*400),WVGA(480*800)
Multiple Language support.User can add new language support.
Freeware
Todo:
1.Audio conference.
2.IM Support: SIMPLE(Presence, Subscribe, Pager message).
3.Support video call.
4.Audio record: record audio as MP3 file.
5.Support TLS/SRTP.
6.Customization Ringtone
7.Multiple sip accounts
Attention!
Having PortSIP installed is not enough to talk except over your local network. You have to obtain an account with any ITSP like Vonage or SipIptel.org, or install your own VoIP server.
If you have any advice, please let us know, we are happy to listen to.
Change log:
AUG 22, 2010 Version 1.3.8.18
1: Added set ptime options.
2: Added Acoustic Echo Cancellation(AEC),Noise Suppressor(ANS) options.
3: Support 2 line, audio conference.
4: Added MessCall notify
5: Added auto connect to Internet.
6: Add HVGA(240*400) skin.
7: Optimized call to PSTN sound quality.
8: Fixed some BUG.
Jun 17,2010
1: Reduce the voice delay.
2: Customization SKIN,Default support:CIF(240*320),WVGA(480*800).
3: Multiple Language support.User can add new language support by self.
4: Added Display name Multiple Language support.
5: change soft name to PortGo.
6: Support receive incoming call on Power suspend state.
7: Remove audio codec G.729,G723.1(Because the G.729 and G.723.1 codec is not free)
8: Fixed dial prefix BUG.
9: Agent name change to :"PortGo for Mobile"
Jul 8, 2009
1:Optimized sound quality.
2:Update SIP protocol stack.
3:Add button to remove account.
4:The number on the contact list auto Remove ()-, and space.
5:Fixed call out has the early media,the ringing sound comes through speaker,Now change the ringing sound comes through earpiece.
Jun 24,2009
1.When callnum is null, click call button will open "Call History".
2.The number on the contact list auto Remove ()- and space.
3: Set default port to 5060.
4.Disable "Auto screen off " .
5.Fixed "The application exit,but ringing tone continues" BUG.
6.Order account by last of user access.
7.Multiple tone files for the DTMF key presses.
8.Added show call failure message.
Jun 15,2009
1.Add windows contact support.
2.Disable Suspend when call is active(quickly drain the batteries).
3.Auto screen off when call is active.
4.Dial prefix support.
5.Command line support.
6.Long press(more then 2sec) of "0" changing to "+", when call num is empty.
7.Check for update.
8.Agent name change to :"PortSIP CE for Mobile"
9.reconnect or auto reconnect
10.fix some bugs.
May 20,2009
1.Add support DisplayName.
2.Fix AuthName bug.
3.Smaller memory requirements
April 24,2009
PortSIP CE Beta1 release
Download:
PortGo for Windows Mobile (Freeware)
http://www.portsip.com/downloads/portgo/PortGo_m.cab
PortGo Pro for Windows Mobile(15 days trial )
http://www.portsip.com/downloads/portgo/PortGo_Pro_m.cab
Multiple Language FAQ:
http://forum.xda-developers.com/showpost.php?p=6866807&postcount=364
last updated: Jun 17,2010
Support Device List:
HTC Touch Diamond
HTC Touch Diamond2
HTC Touch HD
HTC Touch HD2
HTC Touch 3G
HTC TyTN II
HTC Touch Diamond 2(looks kinda fuzzy)
HTC sprint mogul/titan 6800
Samsung Omnia i900
If PortGo can support/nonsupport you device, please tell to me, Help create support list,thank you!
Report Type :
Device Name | OS version | Support | False Reasons
sample:
HTC Touch Diamond WM6.1 YES
O2 Atom Exec WM5 NO Earpiece false
Settings
Hi I'm trying to use this software...Could you please help me with the settings?
I've created an account with iptel.org but can i use this account to make calls for free?
how does it work??
which proxy server and port do i have to use on the settings?
With the iptel.org service only pure VoIP calls can be made; iptel.org does not sell minutes into PSTN.
Sleeping while working !
Dear MaxDan,
Thank you very much for the time that you spent to find this and sharing with us !
i have tested this on TyTN ii and it succeeded ! I think this softphone is nice than the AgePhone mobile2, it has more codecs including G729 in a freeware, which are not available in AgePhone mobile2 after ($35).
There are few small bugs, which could be taken care in next update:
*It forgets the toggle setting for Earpiece / Speaker (some times toggles by itself)
*It also have a sleeping habit, when the screen goes off or the phone goes into standby mode, you can't hear your call, but its working in background.
Rest i would like to say its great software till date...
Thanks & Best Regards
Kip
Dear kipciaan,
Thank you for the use of PortSIP CE.
Question 1:
*It forgets the toggle setting for Earpiece / Speaker (some times toggles by itself)
Did you mean when selected "Use Earpiece", the phone still play ring tone on speaker when the call is incoming? This is our design.
*It also have a sleeping habit, when the screen goes off or the phone goes into standby mode, you can't hear your call, but its working in background.
This is a trouble, Because i can't disable sleep(Power will shortage), and i don't know connect to internet use WIFI or 3G or EDGE, which device must be activating. We will choose a compromise solution to fix this BUG at last version.
Best Regards!
Advance Settings
Dear MaxDan,
thanks for your reply!
* it toggle by it self :
when i generate CALL selecting "USE EARPIECE" mostly the sound comes from the EARPIECE but sometimes from SPEAKER (at back) on TyTN ii.
i think may be the file used for audio routing delay to execute or something... ('m not a technical pro_ )
there must be solution for the backlight and to hold the softphone running without shut off.
in the Menu i see the "OPTIONS" are hidden, don't know why?
*Please change the "History" button to "Contacts/PhoneBook" making others life simple!
#the "CALL History" can be viewed by going into menu.
waiting for the latest updates soon.
Best Regards.
Finally, a SIP tool. Thank you so much! Tow further enhacements:
-if possible in the future to allow configuration of a dial prefix, some VOIP providers require e.g 001 +phone number, if selected from Addressbook 001 is missing, so a possiblity to dial automatically 001+ addressbook number (or any other prefix) is welcome
-also multiple SIP accounts if possible, to switch between providers,
-how can I replace beep when a number is dialed with a DTMF tone
Thanks for the nice weekend present, and congrats for this very usefull tool
dear kipciaan,
* it toggle by it self
I will test this problem later.
there must be solution for the backlight and to hold the softphone running without shut off.
This BUG will fix shall precede all other.
the Menu "OPTIONS"
This is a reserved Menu. To implemented some specifically function.
"Contacts/PhoneBook"
We have to consider use windows mobile system contacts or PortSIP CE program self contacts. when implemented contacts,will change "History" button to "PhoneBook"
Best Regards.
Dear yo3gjc,
if possible in the future to allow configuration of a dial prefix, some VOIP providers require e.g 001 +phone number, if selected from Addressbook 001 is missing, so a possiblity to dial automatically 001+ addressbook number (or any other prefix) is welcome
We can add dial prefix future, setting at "Options" menu.
-also multiple SIP accounts if possible, to switch between providers
You can login out to change SIP accounts. We don't support use multiple SIP account at the same time.
how can I replace beep when a number is dialed with a DTMF tone
You can replace audio file at sound directory, 8000HZ mono 16bit wav.
i wasnt successful to get my VoIPBuster account registering
How can i use this software with voipBuster?
hello,
works fine with french freephonie sip provider.
Is it the same than pangolin ?
Can it be skinable?
thanks :.)
Using a VoIPBuster Account
Please try these settings!
Account name : your VoipBuster username
Password : your VoipBuster password
Proxy server : sip.voipbuster.com
SIP port : 5060
Under Advance tab:-
Domain
Auth Name:your VoipBuster username or voipnumber
User Domain: (leave it Blank)
Stun and Firewall OutBond Proxy:
Stunserver (option) : stun.voipbuster.com port 3478
Outbound proxy server : leave empty
You are requested to use G.711 codec for best results
Best Regsrds
Thanks a lot MaxDan, IMHO this is the biggest step ahead since X-pro, not to many apps around. Once again thanks for this initiative
MaxDan said:
Dear yo3gjc,
if possible in the future to allow configuration of a dial prefix, some VOIP providers require e.g 001 +phone number, if selected from Addressbook 001 is missing, so a possiblity to dial automatically 001+ addressbook number (or any other prefix) is welcome
We can add dial prefix future, setting at "Options" menu.
-also multiple SIP accounts if possible, to switch between providers
You can login out to change SIP accounts. We don't support use multiple SIP account at the same time.
how can I replace beep when a number is dialed with a DTMF tone
You can replace audio file at sound directory, 8000HZ mono 16bit wav.
Click to expand...
Click to collapse
so what else am I supposed to install on my IMate-8502 other than this software?
I have a SIP account from poivy.com.
Thanks
Handfree
This software works grate with my sip account .
Just 3 requests I have for next version if they are possible :
1) Use windows contacts to dial from the windows phonebook with our sip account.
2) Is it possible for this program to have an option to transfer the voice to bluetooth headset when there is a one connected to the phone ?
3) I also request for multiple sip accounts at the same time. The reason is my sip provider have a different proxy for incoming call and another one for outgoing with 2 different port numbers. Right now I can make calls no problem but I can't receive any calls because of the above reason .
If u can add several or at least 2 proxy at the same time, this software will be my Sipphone for ever.
Tnx
Thunder
hi Tempest69,
Is it the same than pangolin ?
Yes,It's same than pangolin. But pangolin is run at windows 2000/xp/vista, Pangolin is freeware too.
Can it be skinable?
We only support Customization Softphone for company current.
Freeware isn't support skinable.
hi thunder6290.
1.Use windows contact
we will add it at next version(Beta2).
2.bluetooth headset
3.multiple sip accounts
I has add it to todo, but it will add to PortSIP CE latter. maybe Beta3 or Beta4.
I has update todo, you can find it at Page1.
Anyone tried this with gizmo5? If so what settings did you use?
finally a newish voip software for WM6 and it's free.
Will try it out tonight after I get home from work.
Hello,
I'm facing the following problem: My Android based (Gingerbread) smartphone has a number of contacts with several phone numbers (home, work, mobile etc.) for each. When I call a contact the call goes through the mobile operator and I'm charged for the call by him.
I also have an an Asterisk-based PBX with a FCT (Fixed Cellular Terminal, or GSM Dialer or Fixed Wireless Terminal) connected to a VOIP provider that charges much less. If I prefix a phone number in Contacts with a fixed string (containing the mobile number to the SIM card in the FCT, plus some pause, plus the password to access the PBX's dial tone plus a bit more of pause) it works fine.
What I'm looking for is a way to have this standard prefix string stored somewhere and it be automatically padded at the beginning of each number dialed. Ideally, when dialing a contact I would be asked if I wanted to call with or without the standard prefix.
Is that doable?
All help is very much appreciated.
Nikolas
After further searching I've come across an app found on Android Market called Prefixer, by 253below.com. It does everything I want and much more. Maybe this info will help some one else looking for this.
Hello
I need a little help please...
i have configured the follow rule für incoming calls:
When numbers matches:
\+49535111222.*
remove characters:
\+49535111
Add number to call log:
prefixer number
other preferences are default.
i will like to see the 222 at a incoming call on the calling sreen, but i dont see it.
In the call log is the correct number 222, but dont on the calling sreen, there is only the android calling number with all caracters
Tobi
Hi Tobi,
I'm afraid I can't help with your problem as I've only used Prefixer for padding a prefix to outgoing calls, according to filters. However, they have a forum running at the developer's site (253below.com) and you should be able to have your questions replied there.
I have nexus s with stock android 4.0. when i make a call, i always get a popup where i have to choose mobil or internet calling. se picture below. how can i remove this ??
set it to default .....
what and where can i set to default ?
IF you can select a default action it will be in settings (don't know exactly where) but if this bother you try deleting the internet calling service? This can simply be removed from the settings menu.
hope this helps a bit.
I'm not sure if that popup was asking you to choose a particular internet calling account or if it was asking if you want to dial over the phone network/with internet dialing. I'll try to explain both though...
The default way to call should be under the settings for the phone app, under the Internet Calling section (near the bottom). There you can control whether the phone asks you if you want to do internet dialing or not.
As for making it automatically choose a certain Internet Dialing account, see if checking Set As Primary Account under the Internet Calling/Account part of the Phone Settings does anything to improve things.
If it doesn't work to your liking, I strongly recommend abandoning the built in SIP support and using cSipSimple. With cSipSimple, you can set filters that trigger when a dialed number matches a certain pattern. For example, you could have Internet Dialing with Sip-Provider-1 kick in automatically if you dial a number with a long distance area code.
If you decide to go this route and need a hand, let me know.
- chris
YESSSS!! its gone. thanks for all your help and tips
Amazfit Pace on standard ROM. When people call, only the number shows, not the name. This seems to be because the app doesn't pick up the contact name if the number has been stored with the international dialling code, which all of mine have. For example, if I store my home number as 020 12345678 it works and shows home when I can, if I store it as +44 20 12345678 then it doesn't show the name, just the number.
Is there any way to address this without removing the country code from all contacts?
No.
The app shows the name to the number that your provider sends to you, exactly that number.
Damn that's annoying, this is pretty much a showstopper for me - one of the main features I like about smartwatches is the ability to screen calls from it, and if possible drop them directly from the phone.
I found a solution to this problem with Amazfit support. If any one else will have the same problem, this was solution for me:
- Go to phone settings, apps and choose Amazfit, then go to Permissions and disable everything, then enable everything.
- Restart phone and watch.
- Caller ID then started to work.
Thanks, but it didn't work. Numbers that match exactly are ok, but if the number is stored with a country code and the person calls from the same company, it doesn't.