Related
Hi everyone,
I would like to kick start a thread for any application installed in the latest SE rom by mystery man. The rom seem stable nevertheless some apps seem do not really prepared for the changes. (i mean from WM2003 to WM2003SE). Let begins........
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Will continue to report.......
Best Rgds... :lol:
Wisbar advance freezes and requires soft reset after telephone has been used/or whilst attempting to dial.
XCPU Skalar - you have to update to version 3.85, lower version keeps system to hang
Tillanosoft Pockettweak - update to 4.2.7, lower version destroys font settings
PocketZenPhone - update to latest beta 11 version, older versions are not able to switch phone on again
Can someone tell me what is the function of "Today timeout" which constantly showed 4hrs at Start-Setings-Today?
Well why must that function included in the today settings? The problem is now and then my today screen showed nothing or clean even though i unchecked the Today timeout box to disable it.
After all i suspect something is not right wif the Today timeout option and nothing to do wif Battery Pack.
Anyone experience the above problem? :roll:
Calligrapher 7.4 (just only 7.4 ,older not has this problem)
after i install and use for 15 sec. ,then screen is locked up cannot tap anymore but Button still work.
I do soft reset and disable it then 15 sec ,screen lock again.
Only one way to solve it by using cradle sync with desktop and select remove calligrapher and then soft reset ,it will work normally again.
It may from defect in version 7.4 or conflict with XDA II.
PLease take care ,if you decide to use this version
Problems with SE (both dcs's & mysteryman)
Hey there guys!
I used this weekend (in fact starting friday evening) to upgrade my T-Mobile MDA2 from ROM 1.72 (radio 1.14) to ROM 2.xx and radio 1.18.
Although I did a lot of reflashing up to now - I want to thank you all guys for this forum, because everything I've learnt about my PPC is from here. It is shame that I cannot contribute via paypal because Bulgaria is not included in their country list.
Now.. Here is what I've experienced with my mda:
I upgraded from 1.72 T-Mobile WWE to 2.02ti... All cool - until I started to load the device with programs. I mean - it is cool and fast and nice and colorful..
A guy mentioned that SE boots faster - I can's say that - the phone would show the first boot picture, then fast will change to 2nd and then (in 2 to 5 seconds) the bluetooth led will flash (if at all) at least 5 times and then it shows the today screen or will stay there forever :-(
I understood that:
* xscallar 2.8x would not work - it freezes the system;
* sbp pocketplus 2.1 would hang the system or/and the today screen;
* sprite backup 3.0 hard-resets the system (3 in 2 times after finishing scheduled/normal backup);
* gprs monitor 2.12 would hang the today screen;
* cleartype is a way worse than in 1.60wwe
* if the system works, compared to 1.72 - it is flying! but :-(....
These problems appeared both in 2.02ti and in 2.06, no matter what extended rom I install (if I install any at all - because thru tears I tried that one too ;-) )
The (X) sign for closing programs disappears constantly and some programs could not be closed or [ok]'d :-(
Bluetooth 1.5x would either not work properly or would not work at all.
about the extended rom - i noticed this:
MMS15024_WWE_Hima_OzUp.sa.CAB, despite the lower version compared to MMS2.0.0.13 incorporates in the outlook folder and doesn't take additional space in the today screen. Also it provides sending restrictions as 100K, 200K, MAX - ;-) which is kewl 'cause I missed the ability of my SonyEricsson P900 to send unlimited in size MMS messages.
CallerIDB10, provided with 2.x SE versions cuts about 4 pixels from the bottom of the CLIP pictures and I don't like it - it has no new features or anything
For conclusion:
I liked the look of SE versions - it is really neat and fast - when it works.
But non of my really needed sofware would work as expected.
I went back to T-Mobile 1.72 (edsub's version) and I will tell you guys - there is nothing as stable and fast as it is.
This is my first post here, and I read this forum for more than 8 months. You guys rock!
Yours,
Dean
gerald8297 said:
Hi everyone,
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Best Rgds... :lol:
Click to expand...
Click to collapse
I had a big problem with 2.06-mystery man . Stuck on the every second
boot . So I had to do Hard Reset all the time.
After that I switched to 2.02 and all I can say its the most stable ROM
I know from 1.60 .
The reason I am posting here is :
NO PROBLEM WITH Battery Pack Pro v1.11 on the ROM 2.02.t1WWE .
sprint said:
I had a big problem with 2.06-mystery man . Stuck on the every second boot .
Click to expand...
Click to collapse
I've notices that 2.06 sometimes freeses during boot when SD-card is inserted. It boots normally when SD-card is out and inserted when device finishes booting.
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Probably
Probably , probably , probably
Spb PocletPlus 2.1 is stable in my 2.06SE. The problem i encountered is the unstable widcomm bluetooth stack ( 1.5.0.801 ) which always "could not correctly initialized - BTTrayCE.exe) . can some one post some registry tweak for this?
@ mamaich
can you post the MS cleartype tuning tool please? thanks! :lol:
Phone Profiles is another one....
Using Phone Profiles 7.5 or 8.0, there is a dialog on reboot, 'Can't Find Window", (something like that), and it will not continue booting, only solution is a hard reset...
I can confirm the Calligrapher 7.4... will lock during boot, hard reset
mamaich said:
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Click to expand...
Click to collapse
Pls do so. Many are anticipating.
Thanks for the good work!!!
:lol:
Here is Microsoft Cleartype Tuner.
mamaich said:
Here is Microsoft Cleartype Tuner.
Click to expand...
Click to collapse
Thank you!!! So is this file will refine the ugly font of WM2003SE lanscape Cleartype?
working good mamaich!
still my widcomm BT stack cannot restart once in awhile..any tweak on this?
Tnx.
sprint said:
I had a big problem with 2.06-mystery man . Stuck on the every second
boot . So I had to do Hard Reset all the time.
Click to expand...
Click to collapse
Mine is working fairly well... I did notice the same problem you have, but I got around it by holding in the reset button until it reset itself (normally 5 secs or so). It resets fine every time. This is a pain compared to 1.66.00WWE. I haven't tried 1.72 yet. I would like to persist with the 2.06 version to see what bugs it has.
Recrem...
UPDATE:- Installing XCPUScalar Version 2.85 has completely cleared up the reset hang problem. I have configured it to auto start on soft reset, and minnimise on start. I have now reset well over 10 times and it resets as it should. I have XCPUScalar set to a min speed of 400MHz though...
I have only one problem with wm2003se 2.06 - at every call speaker mode turns on automaticly
mamaich said:
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Click to expand...
Click to collapse
Thanks man ! the tuner is great but still the font is bad in 2.02t1 it was much better with 2.06 but i changed it because it get stuck on reset!
could you please post the clear type file from 2.06?
thanx in advance :wink:
gerald8297 said:
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Click to expand...
Click to collapse
Yeap i encountered this problem too. Any solution so far? Or shall i reflash my rom to dcs one 2.02? Would it solve this problem?
Anyone pls HELP......
My list of problematic programs in SE
1. Mamaich's "Contact Button", which I miss dearly.
2. Pocket Zen Phone.
3. BTtools freeze Today screen. (not needed for functional purposes, only used to turn BT off automatically)
4. Still have to use EzWAP for MMS
5. Camera switch screen back to Portrait.
About
If you need turn on WiFi, you have to press at least 4 keys by default to start WiFi (using Comm Manager).
After installation of WirelessToggle, just press and hold Comm Manager button to toggle Wifi (on/off). (Alternatively you can use attached exe and assign WirelessToggle to any button / shortcut you want to).
And as always: There are few more programs that can be used for faster turning on/off WiFi but this keeps the RAM free as much as possible.
Installation:
WirelessToggle.cab - just install
Run WirelessToggle.exe (from \Program Files\smartmadsoft\WirelessToggle) manually (just once) before using the shortcut (otherwise you wont be able to confirm dialog window asking you about running unsigned code)
Download:
WirelessToggle.zip (4 kB)
Support:
Tested only on S730 but it should work on other devices as well (will test it later).
i have been searching for a program like this for weeks now, thanks!
btw, it works great on my MDA Vario 3
Dost dobry!
Works fine on HTC TyTN II - kaiser
work on hp ipaq 514 thnks
Kaiser, WM6 (Dutch)
Doesn't seem to work.
BTW: We don't have a \Program Files-folder but a \Programmabestanden-folder ...
Sorry to bump this post but this app is so handy thanks so much for the share works great on my htc prophet 6.1
Does not work on my glofiish x500 Wifi switches ON, but after a few seconds switches OFF. Is it possible to fix that?
Thanks a lot! I have also been looking for this for ages... Unfortunatly, I'm not a native english speaker and didn't know the word "toggle" until recently, which complicates search
Works fine on my SE X1 with rom Jack V5 full (WM 6.5)
Hi all,
i' ve updated yesterday to AP4 and now i have the problem that IGO8 from the storage card isn' t running.
Does anyone know that problem ?
Best regards
Thorsten
quick answer for IGO2006SE is disable htc home , never run igo 8 but is worth a try
Hi Lakeman,
have tryed it, but it still doesn't work.....
dobifan said:
Hi Lakeman,
have tryed it, but it still doesn't work.....
Click to expand...
Click to collapse
disable htc home
softreset
disable autorotation (vueflo)
start igo8
you are good to go
He mate, you' re my hero ;-)
It works.... But how i can use the HTC Home and the IGO 8 ?
You can't run both- you can still use HTC Home, but must remember to disable it from Settings/Today/Items before running iGO.
OK, thank you for the information
@MeilM
I have disabled HTC Home and VlueFlo but iGO8 final still doesnot start.
QAN
QAN said:
@MeilM
I have disabled HTC Home and VlueFlo but iGO8 final still doesnot start.
QAN
Click to expand...
Click to collapse
I can't comment about HTC Home, as I don't use it (I have SpB PP4 and Time instead) but I can run iGO8 regardless of the state of Vueflow.
Maybe there's something else in your system stopping iGO8 running?
I'm running the prerelease VIP version of iGO- don't know if that makes any difference?
QAN said:
@MeilM
I have disabled HTC Home and VlueFlo but iGO8 final still doesnot start.
QAN
Click to expand...
Click to collapse
You have to softreset.
@gtm55
I have got it working now. I had to disable TouchFlo and do a softreset.
QAN
Have upgraded to HD2 and using my diamond2 just as a tomtom.
Currently running latest TESS rom on it but does anyone have any recomendation for a super quick/lightweight ROM for just running tomtom on or how to have it just boot into tomtom?
Thanks
Topaz Essential 2.F WM 6.1 super fast !
never had problems using tomtom and stockrom oder energyrom
thanks.
Does anybody know how to get it to boot straight into tomtom?
Surely you just put the tomtom link into the start-up folder
thanks will give that a try
Any other hints to speed up rom, ie things I can disable/uninstall that won't be used as I will be only using it to run tomtom and nothing else
Tom Tom
I only use tom tom when I want a fast, dirty and quick gps soft so I never saw any problem with any rom at all. Tom tom is already fast, how faster do you want it ?
I have switched to igo primo for my main gps tasks. It'seasier for my wife and somehow it seems to get a gps fix far quicker than tom tom with energy rom. But of course the 3d features slow the soft after that.
Well I have removed touchflo 3d from today and deleted pkg from the startup folder.
main trouble now is how to bypass the "sim card is missing" screen, I have turned phone communications off which does it but this disables the gps.
Any idea's please?
ps any ideas if it possible to further speed up the loading of the OS?
Thanks
anybody know how to disable the phone part but to keep the gps
adamwest said:
Well I have removed touchflo 3d from today and deleted pkg from the startup folder.
main trouble now is how to bypass the "sim card is missing" screen, I have turned phone communications off which does it but this disables the gps.
Any idea's please?
ps any ideas if it possible to further speed up the loading of the OS?
Thanks
Click to expand...
Click to collapse
enable flight mode and put a prepaid simcard in.
hippi01 said:
enable flight mode and put a prepaid simcard in.
Click to expand...
Click to collapse
This disables the GPS I think
I have been trying to set up a VoIP client on my Windows Mobile phone for a long time, starting with the HTC Wizard which I could never get to work.
I have finally managed to get a VoIP client with a really nice interface working on several phones that I have tried it on.
I am using ViaTalk as my provider but it should work with any VoIP provider.
It works great (with a slight delay, nothing that I can't live with) on an unlocked HTC Sprint Touch Pro 2, a T-Mobile HD2, a HTC Diamond and an HTC Fuze.
The application is by NCH software out of Australia and it is free to use, or if you want to unlock all of the features of the application, download and register the business edition.
Here is the URL for the download:
http://www.nch.com.au/talk/pocket.html
Or if you would like, PM me and I will be happy to send it to you as an attachment to an email.
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
hecthork said:
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
Click to expand...
Click to collapse
I am using the paid version but the only difference is that it unlocks some additional features that most people proably don't need anyway.
It is not trialware so it has no expiration.
thx you man, i'm trying this app since yesterday; works good!! easy to configurate, i'm using the free version because; i don't have 2 line, i don't use conferente mode... but it will be interesting trying these features xD
How does this app compare to AgePhone?
Hello,
why not to give a try to PortGo !
http://www.portsip.com/softphone.htm
The free version is sufficient and very simple to use, even with several providers (I currently use 2). Skin and language are easy to adapt if necessary (I've made it for French), see also here http://forum.xda-developers.com/showthread.php?t=508715
Dangze
bobzero said:
How does this app compare to AgePhone?
Click to expand...
Click to collapse
I really couldn't tell because I have never tried AgePhone.
I have tried most of the different VoIP clients mentioned throughout this site but I have never been able to get one to work right until I tried this one.
It could be that I am too stupid to configure them right or it could also be that they simply don't work very well, I can't say.
As for PortSIP, I never got it to work right and the developer dropped off line a while back as far as I can remember.
This little VoIP client that I am using has got a clean interphase, it is easy to configure, it does not require any special "helper" apps. so I am happy with it.
Hope that some of you enjoy it too.
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
ardec1 said:
{R^7Z trim]
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
Click to expand...
Click to collapse
I have mine set so that the light always stays on until I turn it off(I turn off auto back-light, my preference). So, no issues there. Additionally, I think there is a setting or app that will allow WiFi to run even while the phone sleeps. Or perhaps it is set into a low-power mode until the power key is pressed?
Howto in France ?
It seems great but how could I make it work in France.
My provider (mobile or at home) is SFR.
Thanks in advance to all for your answers.
Setup file attached to original post
I finally got around to attaching the setup file to my original post so it can now be downloaded directly from this site
Hi,
I suggest to please change the title to "Express Talk for WM".
I already tested it on my Ultimate 8502. I can call but can not receive incoming call. It ring but after receiving, it stop ringing with no active call and no sound. Any solution?
thanks
sadat007
After installing Pocket Talk and configuring it I get the message that my handheld device is blocking UDP port no 8000 and 5060. Of course it isn't but I can't make callas. Has anyone had the same problem?
installation unsuccessful
It fails to install for me...
I connect my HTC Mega (Windows Mobile 6.5, moded rom), I start the setup, my phones screen shows the installer but than says "Installation of NCH Swift Sound Pocket Talk.CAB was unsuccessful"
Doesnt matter if I choose MainMemory of StorageCard.. there is plenty of free space on both of them.
Any Ideas? Are there any prerequisites? I checked the NCH forum but couldnt find any help...
PS: trying to install directly from the .cab it leaves on my storage card wont work either
Hi sorry for my bad english, setup doesn't work on my hd2 why???
Franky24 said:
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
Click to expand...
Click to collapse
Myself some hours ago said:
I'm also using WMVoIP and my phone is enabled by default to use VoIP when wi-fi gets enough data traffic, so I don't need other VoIP apps except for second lined. Usually I switched off the phone radio and whitched on the wifi radio and VoIP wasd enabled as default phone line.
But my problem is now I can use VoIP over 3G at no penalization from my phone provider, and I can't set my phone to use VoIP by default.
Is there a way to set VoIP the first option and phone the second one, using 3G (not wifi) ?
Click to expand...
Click to collapse
Editing: I found this xda-dev's app here: http://forum.xda-developers.com/showthread.php?t=730303 and it works fine with one SIP line, in my Kaiser, even using 3G instead of wifi.
Thanks !
It works fine on my HTC Touch Pro cdma with wm6.1.
But I don't like the fact I can't use my original contact list...
Hey Guys,
Im wondering what would be better for me, Im based in the UK and I want to know if Using a VoIP Service such as Skype or get a Dedicated Phone line put into my address? what do you guys think?
- David Scheme