hi all few weeks ago i was looking for a way to surf the web on my eris and i had to take it to some one to set it up and he charged me $30 to put a shortcut on the home screen that say proxy settings but after the leaked 2.1 which unfortunately i installed on my eris instead of the rooted one i lost that shortcut so i did my researches and i found that if you download any cut from the market open it and go to New shortcut then Activity wait for the list to load scroll down to proxy settings open it and create a shortcut go bak to home screen and look for the proxy settings shortcut open it and for hostname use wap.metropcs.net and port 3128 click save restart and you be able to surf the web using the internet app
note:if you are connected to a wifi the internet app will not work in less you turn mobile network of and restart for that i have opera mini it will work on wifi but not on mobile so i use internet app for mobile and opera for wifi the rest of apps will work normal on wifi not on mobile only the mail app work normal on wifi and mobile use it to send and receive pix messages
also you must do the settings on ##7764726# and ##778# from @vzw3g.com to @mymetropcs.com for more information on that refer to these post http://www.howardforums.com/showthread.php?t=1466303
Do not skip any steps!!!!!
This works...
WAP
1: Goto settings -> Connections -> Connections
2: Remove any connections that are there
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.000000
4: Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = [email protected]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = [email protected]
PPP PASSWORD = metropcs
then menu and + save changes
Click to expand...
Click to collapse
so now only i need to set the mms to send pix because i receive picture messages but can't send
So what kind of speeds do you get from metropcs?
We have metropcs here in Tampa, FL but from what I understand it comparable to dialup speeds. :/
Yea same here in Dallas if I'm on 1x I get dialup but on some areas I get 3g
Oh you put s.ip dun user name as @dun.metropcs.com
You soul get 3g on some areas too
deseo said:
Yea same here in Dallas if I'm on 1x I get dialup but on some areas I get 3g
Oh you put s.ip dun user name as @dun.metropcs.com
You soul get 3g on some areas too
Click to expand...
Click to collapse
You'll need APN Backup & Restore (free from Market) to get your MMS working right. There's tutorials all over about what things need to be put in, but I just modify the 'Production' area in the xml file. Some people create/rename a whole area called 'metropcs'.
I've done this with Cricket. Good luck with Metro.
I have don it but not success
For mms
pkopalek said:
You'll need APN Backup & Restore (free from Market) to get your MMS working right. There's tutorials all over about what things need to be put in, but I just modify the 'Production' area in the xml file. Some people create/rename a whole area called 'metropcs'.
I've done this with Cricket. Good luck with Metro.
Click to expand...
Click to collapse
I have tried most possible solutions posted on the forums not just me but almost everyone whit eris on metropcs are trying to figure these out
HTC Eris Metro internet apps (other than main internet browser) to work on metroweb
I have the HTC Droid Eris all flashed from Verison to MetroPCS on Android 2.1 rooted, I have Web(on the default UI Sense internet browser. All I want is to be able to use Android Market and other Apps like Trapster (to detect speed traps) without using WI-FI. I want to be able to use these internet dependent applications on Metro's mobile data network. So far have been unsuccessful. Does anyone know the secret Metro PCS settings that will make this happen ? Any ideas?
I do the remote flash on the eris for either cricket or metro apps work /gps/market place/full internet pm me for details
ljm1715 said:
I do the remote flash on the eris for either cricket or metro apps work /gps/market place/full internet pm me for details
Click to expand...
Click to collapse
Why not share?
popetorak said:
Why not share?
Click to expand...
Click to collapse
yea he is looking to get every ones money as the guy that was charging 30 for web setup tha's why he don't share on till some of us find out how to do it
Is There a Way to Backup Your Metro Flash Settings?
I had my Eris flashed to Metro, but it wasn't syncing my contacts with Gmail correctly. People on these forums were saying that a hard reset would fix it. Tried that and of course all of my Metro Flash settings were wiped and my phone was reverted back to the original Verizon network. Is there a way to backup the Metro Flash settings or create some type of restore image, so I don't have to take it back to get reprogrammed every time I do a hard reset?
How do I know if I have all the APN setting correct?
brownewill said:
I had my Eris flashed to Metro, but it wasn't syncing my contacts with Gmail correctly. People on these forums were saying that a hard reset would fix it. Tried that and of course all of my Metro Flash settings were wiped and my phone was reverted back to the original Verizon network. Is there a way to backup the Metro Flash settings or create some type of restore image, so I don't have to take it back to get reprogrammed every time I do a hard reset?
Click to expand...
Click to collapse
Don't need to take to re flash just load the metropcs .prl and you set just dial *228 to reprogramor do the settings manually
challenge
what about internet and mms?
Thanks about this guide now I have internet and mms working fully. I would kiss you in rl for this guid seriously I spent like week searching and finally found.
Just a tip you can't have mms working without having internet working. You get internet working then edit mms setting with apn backup and restore.
code600 said:
Thanks about this guide now I have internet and mms working fully. I would kiss you in rl for this guid seriously I spent like week searching and finally found.
Just a tip you can't have mms working without having internet working. You get internet working then edit mms setting with apn backup and restore.
Click to expand...
Click to collapse
Did you get it working on metro Pcs? if so how did you edit the apn file? Im just getting into android and I have been searching for some time with no luck. Thanks
brownewill said:
I have the HTC Droid Eris all flashed from Verison to MetroPCS on Android 2.1 rooted, I have Web(on the default UI Sense internet browser. All I want is to be able to use Android Market and other Apps like Trapster (to detect speed traps) without using WI-FI. I want to be able to use these internet dependent applications on Metro's mobile data network. So far have been unsuccessful. Does anyone know the secret Metro PCS settings that will make this happen ? Any ideas?
Click to expand...
Click to collapse
Download APN Backup & Restore from the market.
Back Up your APN's.
Upload them here, so that other MetroPCS users can have MMS working properly.
You would be a hero.
Also, if you want to actually help people, you can do a nand backup, then turn your phone on and delete all of your contacts and information the best that you can, then do a nand backup again, and upload the second nand backup.
APN Backup & Restore is how you edit APN's. They're not REALLY APN's, they're just for MMS, on this phone.
##778 pw 000000 is how you edit most connection settings
iptables in the system is how you put EVERYthing through the proxy (need root)
and APN Backup (then edit it on a computer in a text editor) is how you can edit the APN's.
Make sure you DELETE before you RESTORE or it will just add on to the APNS already there.
here is the eris flash for metro/cricket enjoy...
www-megaupload-com/?d=PV7PQ9UI
change the dashes to dots..
Yes, get your custom ROM in there, and then flash the .zip (within this .zip) that is appropriate for MetroPCS.
It's all there, and it should work perfectly.
Related
How can I change my mms settings. when I open messages and the click settings then click connection settings it shows the settings but will not let me edit them can anyone help with this thank you
I belive there is a way to edit these settings via cdma workshop but i dont know too much about that
I cant get the phone to connect to the work shop
Does anybody know if they have rooted this phone yet I read the forum about it it does seem like they have yet
Root is a work in progress.
What are you messing with your settings for? if your having issues just run *288 and let it do it. if that doesnt work use the RUU Update, and then reprogram your phone and use *288
I cant I have the Eris running on Cricket I have the phone, internet, text and the market running great but would like to have mms
How did you get it running on cricket? Didnt you have to flash stuff for that work, if so please post me links asap. It will inevideably lead to root.
FireSokar said:
How did you get it running on cricket? Didnt you have to flash stuff for that work, if so please post me links asap. It will inevideably lead to root.
Click to expand...
Click to collapse
I'll take another order of that link as well.
Who wants to BET hes talking about the MOTO Droid...
FireSokar said:
Who wants to bed hes talking about the MOTO Droid...
Click to expand...
Click to collapse
Quit trying to correct me in every forum i post in.
FireSokar said:
Quit trying to correct me in every forum i post in.
Click to expand...
Click to collapse
Talking to me? If so, I meant that as I'm confused as to whether he did mean the Droid or not.
Nice ASSumption though.
Change PRL, network settings
dial ##778 then edit settings
so some body finde out how he did to make it work on criket?
wat about using APN Backup & Restore?
deseo said:
so some body finde out how he did to make it work on criket?
Click to expand...
Click to collapse
no, as above, edit security settings in epst
uhhh, yoo hooo! guys, the htc based android phones are dirt simple to program for use on another network..
I've had my eris running full on alltel over two months now with the unl. data plan. Never looses 3G, alltels 3G coverage is wicked sweet.
Getting Voice & SMS working:
Get current .PRL file for your network(alltel, sprint, vzw, cricket, etc..), google for it. Mount your phone thru USB, drag the PRL to the root of the SD card.
Unmount
Dial##PRL
Enter SPC code
Select PRL from SD
Restart Phone
Activate phone with your carrier, lie about what phone it is, i told alltel i'm a Samsung Delve, a phone they have.
They'll tell you to *228 it, this will work perfectly after you've programmed the PRL described above.
Hang up with them.
Getting data to work:
Dial ##PST send.
Enter SPC code
Go to security...
Google for those settings for your carrier and enter all that is asked for in that menu screen.
Do nothing else, restart the phone.
Now, setting up MMS on the Eris is a pain, I still can't get it.
When going to Messages, Settings, Connection settings, ... i am not allowed to edit those settings, they're stuck at vzw values.
IF .. and ONLY if I install the "quick settings" app in the market, disable mobile network, THEN go to messages, connection settings, .. i can now edit those values and change them to alltel's mms addresses... go home, them go back into messages, connection settings, all is saved, good. If I go and re-enable mobile network, ... the mms connection settings switch back to vzw... GAHH!!!
stevey500 said:
IF .. and ONLY if I install the "quick settings" app in the market, disable mobile network, THEN go to messages, connection settings, .. i can now edit those values and change them to alltel's mms addresses... go home, them go back into messages, connection settings, all is saved, good. If I go and re-enable mobile network, ... the mms connection settings switch back to vzw... GAHH!!!
Click to expand...
Click to collapse
It's probably just allowing you to input settings but unable to save them due to lack of permissions. Looks like MMS is screwed until root gets here :\
how do you get web working on crickets network ive change the settings from the security but still no luck.
I have a new what i was told is an unlocked atrix on the sasktel network. i can call and text but i can't save my apn settngs to get my internet working. the wifi works fine but not the network one. please help, my provider won't
What are your current APN settings? Go to Settings >Wireless & networks > Mobile Networks>Access Point Names
Neither will mine. Unlocked Bell Atrix on MTS.
I have no APNs listed, and they never show up once saved.
Not sure what other network settings are..but I'm unlocked on Telus and my apn settings are: sp.telus.com
When I first entered them I had so.telus.com and had phone and SMS but no mobile data until I realized my typo.
Lineman69 said:
I have a new what i was told is an unlocked atrix on the sasktel network. i can call and text but i can't save my apn settngs to get my internet working. the wifi works fine but not the network one. please help, my provider won't
Click to expand...
Click to collapse
Hello buddy,
i had the same problem and the solution that i found is to set a new apn and just set the following choices
1. Name
2. Apn
3. port
All other choices left blank.
I did that and it works perfect.
nsourm said:
Hello buddy,
i had the same problem and the solution that i found is to set a new apn and just set the following choices
1. Name
2. Apn
3. port
All other choices left blank.
I did that and it works perfect.
Click to expand...
Click to collapse
Tried that.....i can enter all the settings that is fine. but as soon as i click the menu button to "save" it goes back to the main page and shows no APN settings saved
Are you rooted?
If yes try to change the /data/data/com.android.providers.telephony/telephony.db add the apn in there
no i am not rooted i did not want to do that till i knew i got everything running.
I tried and tried to get the Bell Atrix to work.
APN Manager: no luck
Network Info II: no effect when settings changed either in OS or APN manager.
Whenever an APN was typed in, it would "save" (proven by APN Manager) but not be selectable, it just disappears once menu-save.
Returned it and purchased a Nexus S, took all of a minute to get data working.
Lineman69 said:
Tried that.....i can enter all the settings that is fine. but as soon as i click the menu button to "save" it goes back to the main page and shows no APN settings saved
Click to expand...
Click to collapse
Perhaps i didn't explain correct.
Make a new apn change the first four choices and left the other unchanged(not blank)
_Dennis_ said:
Are you rooted?
If yes try to change the /data/data/com.android.providers.telephony/telephony.db add the apn in there
Click to expand...
Click to collapse
i am rooted now. can you explain this method a little bit for me
i cant just change the first four because the MCC and the mnc are not registering i have to enter them manually. my provider says it is not reading them from the sim card for some reason. i rooted the phone now. i am going to try getting into it from there
The easiest way I found was download SQLite editor. Its a few dollars. Then open it and click yes for root. Go to dialer storage then telephony.DB. then carriers. Add your apn to the list. If eceything is correct it should work. If the phone does not read the mcc then you may be screwed though.
Sent from my HTC Desire using Tapatalk
Lineman69 said:
i am rooted now. can you explain this method a little bit for me
Click to expand...
Click to collapse
(all settings I left blank, leave blank, make sure you press menu, save to save)</br>
2) Enable Airplane Mode
(hold power button for three seconds, select Airplane Mode)
3) Open Root Explorer
4) Navigate to: /data/data/com.android.providers.telephony/databases/
5) Click on "telephony.db"** (this should open the db using SQLite Editor)
6) Select "carriers"
7) You should see a long list of APN settings for various carriers, Push the menu key to bring up the menu. Then goto new record and fill out the details from there. Make sure that the _id is sequential from the other records.
8) Press back twice to close the SQLite editor and you should be back in Root Explorer. Close Root Explorer.
9) Disable Airplane Mode
Modified from http://forum.xda-developers.com/showthread.php?t=980636
WARNING: HAVEN'T TESTED BUT SHOULD WORK
I tried the methos above when it comes to the searching the network part i get a network error because i am in airplane mode
Oh i did not have the sqlite thats why. Going to try again
ThInk i might have got it. Will know sooN
Lineman69 said:
Ok almost got it but what do you mean by
Make sure that the _id is sequential from the other records.
Click to expand...
Click to collapse
there is an _ID collum on the far left that goes from 1 to 80ish on my phone so when u fill that out im assuming you will have to make it sequential. 1 2 3 ... 85 etc etc
Ok i finaly got in there my carriers setting were in there but i added a new one with the new settings and i still have nothing
well my only other sugestion is to flash the 1.2.6 sbf and then OTA update to 1.5.7
follow http://forum.xda-developers.com/showpost.php?p=12631216&postcount=2911
http://forum.xda-developers.com/showthread.php?t=1016060
to keep root and install custom rom if that is also what you fancy
Hey guys/gals. I just Odined Simply Honey 3.8 Revolution light to my phone but i don't have data. Wifi seems to work and i have tried rebooting the phone. Is there something I missed?
dbg17891 said:
Hey guys/gals. I just Odined Simply Honey 3.8 Revolution light to my phone but i don't have data. Wifi seems to work and i have tried rebooting the phone. Is there something I missed?
Click to expand...
Click to collapse
settings > wireless and network > mobile network > access point names > t-mobile
apn type: internet and mms
under access point names its blank. I can add a new apn but im not sure what all to add as far as proxy, port, user name, pass, server, ect...
edit: I got it to work thank you.
Also lost Data after flashing Wifi Calling app ...can't change settings in Mobile networks
think I've lost baseband...(whatever that means...basically phone won't recognize a sim card is loaded) is there a way to fix this without Oding ?
Does the phone say there's no SIM card inserted? If so, run to any T-mobile store and ask for a new SIM.
Also, I was having data issues two days ago. I keep a copy of the KB5 modem that's flashable in Recovery. Just re-flash and all was good.
T-mobile APN address:
epc.tmobile.com
Wish I could attach the KB5 file for ya, but I can't. Just search for it.
Sent from my GT-I9000 using XDA Premium App
i dont know much about apn?
but under my apn it says simple and under that
it says tmobile us
But simple is the one thats highlighted But when i try to select tmobil us it sends me to page with lots of info like proxy and port #etc...
I get data connection with simple but i think my data connection would be better with tmobil if i could get that to work.
anyone know how to do this????????? how do u fill out the apn page with what info do i put in?
or know wht simple means??????????
Apn type, wht do i put there?????
Is there anyway to flash the Droid Razr to metro pcs and if so can someone provide me with a link? If I'm posting in the wrong place just let me know.
i'm thinking you may need more than just flashing for that.
Do you know what I might need then? This verizon bill is killing me. I know people have successfully flashed the razr to Cricket. I mean I know I'm gonna need to root kit which isn't a problem I've done that kind of thing plenty of times and I've just been procrastinating on doing it on my Razr for some reason.
i know how to flash it to metropcs just cant get it into the metropcs system so if someone can help me as far as getting it into the system i can definately help them on the falshing part
houdini
you just have to houdini the phone, tha'll will get the phone in their system
candel said:
you just have to houdini the phone, tha'll will get the phone in their system
Click to expand...
Click to collapse
ive tried running it through houdini and it isnt on their compatible phones list
Flashed on cricket
Noodlez916 said:
Is there anyway to flash the Droid Razr to metro pcs and if so can someone provide me with a link? If I'm posting in the wrong place just let me know.
Click to expand...
Click to collapse
I found this
http://www.cricketusers.com/verizon...-cricket-wireless-talk-text-mms-internet.html
At the moment this is a placeholder for notes. The tutorial might have to be finished by someone who has more time than me to work on this device. Mine is on Verizon now. I will probably poke at it a little bit more when I get home and back to a normal schedule, but throughout December, it's going to be hectic for me. I'm going to try and add pictures so someone will have some knowledge going into this where I had none. If someone can get a hold of a Bionic tutorial, this might be similar.
Currently talk and text works but 3g data drops out. It works when it's connected but wants to cycle off and on A LOT.
As a good rule of thumb, always try to backup your settings before modifying them.
DIAG MODE
Verizon Droid RAZR Diagnostic Mode How To
NOTES (semi based off Thunderbolt tutorial)
CDMA WS 3.5 or later will give you more options and another method of writing data profiles to the device.
QPST does work HOWEVER you cannot read and then write the original settings to the phone (after modification of course). You have to start fresh and write ONLY.
CDMA AUTO (PRL) MODE (info from RLockwich)
Go into *#*#4636#*#* - Went into phone information (Set to CDMA Only PRL, DNS check allowed, Query CFU enabled).
QPST
Add the port for the device if required under QPST configuration. It's going to be the DIAG port. Just check device manager to see what port that is.
Use the Service Programming application under the QPST folder to access the phone. Connect to it but don't read.
Now follow this tutorial to write the proper information:
http://www.cricketusers.com/flashing...s-cricket.html
Write to the phone. Reboot it once all the writing is done and catch the boot to put it back in DIAG mode. If you don't it's no big deal, but you will have to power it down and get it back in DIAG mode before continuing.
CDMA WS
Open up CDMA WS and connect to the port with the RAZR. Go to the security tab and send the SPC 000000. Then go to the memory tab and send the DROID NV items which can be found at whiterabbit.org. It should write the NV items and fix the data.
UPDATE: The following might be required
Go to the "Other" tab and navigate to "R-UIM" then click read.
Change it to "NV Only" and write to phone. It should say Successful
Close out CDMA WS and reboot the phone.
Phone Settings (info from RLockwich)
Go into the ##PROGRAM select option 14 for LTE I turned off LTE bppanic, LTE Movement detection, and disabled Class 1,2,2 APNS
Additional Instructions (info from RLockwich)
Just went through all the settings again, I hope everyone can have as much luck as I just did. I was thinking, and I remember seeing the end of the thunderbolt tutorial says the last step is to remove the 4G LTE microSIM. I had tried that before early on when I first flashed it, but when I removed the card, it showed No Sim, no network connection and a SIM symbol with a exclamation point. I just tried it again a hour ago...Pulled the SIM, showed no network and then I rebooted the phone... FIVE times on and off all with immediate and STABLE 3G at 10 minutes a time between rebooting. FIXED. Done messing with it.
UPDATE 12/19 - After this last post it's been 4 days since we cracked the 3G cycling issue, and my phone is working excellent! I'm very glad I was able to be a part of this and get credit work any work I put into this.
Dina's Notes:
Got everything working THANKS to Chris and RLokwich! Oh, and for those of you that are not yet successful with this flash, just re-read the entire thread. Everything you need is HERE!
It was not all smooth in the beginning.
Insights:
1) No need for BP tools. If your phone is on the homescreen, just connect it to the cable, choose PC mode and set up the port in HW.
2) Mine took like 5 master resets before 3g showed up. So in case you are pulling your hair as to why 3g not showing up, master reset the phone. Turn on wifi. Bypass activation screen (backwards C method works if you keep trying for like 2 minutes), go through the set up pages and 3g will be there.
Everything is stable so far. 3g working like a charm.
Discovered a secret!
If you do not get 3g up, make sure to Enable at least one APNs in the LTE settings (##PROGRAM menu)
Now time for some icecream
Read more: Full Flash Verizon Motorola RAZR to Cricket Wireless (talk, text, MMS, and Internet)
MMS (needs to be tested)
The only thing I've realized now that is wrong, is no MMS. I have MMS through the tutorial on bypassing the apn through GoSMS, but I would very much like to not have it to be that way. I thought early on in this flash that I did have MMS, I think I was just being a smart ass so I changed some settings in ##PROGRAM for the SMS/MMS part that I copied from the Thunderbolt tutorial. I don't know if I messed something up. I was also thinking I've seen people having two Cricket apns? One for internet and one for MMS, does anyone know if that may fix it? I was thinking it may be that, but in my apn for cricket already, I edited it and filled in all the MMS settings for that APN. Maybe that's something I did wrong, I don't know.
If anyone does have working MMS on their flashed Razr, please post anything that might help us. Please post all your settings in SMS/MMS in ##PROGRAM and into your APN edit settings for Cricket APN you have for MMS (if you have anything filled out in the MMS blanks)
##Program
Enter SPC "000000"
SMS/MMS Settings
MML Server Name
[email protected] > wap.mycricket.com
Address for Upload to Online Album
438749 > 111111
Maximum MMS message size (Byte)
1228800 > 228800
SMS to Email Gateway
Anyone? Currently set at 6245
Try adding an APN for Cricket's settings or modifying the existing APNs to reflect Cricket's MMS settings.
this is what i used to get my phone on metro but the only issue im having is getting the phone itself into metropcs inventory....
i have a droid 3 esn im willing to use or if theres a way to just get the razr into the system that would be the better method
adventuressmalik said:
I found this
http://www.cricketusers.com/verizon...-cricket-wireless-talk-text-mms-internet.html
At the moment this is a placeholder for notes. The tutorial might have to be finished by someone who has more time than me to work on this device. Mine is on Verizon now. I will probably poke at it a little bit more when I get home and back to a normal schedule, but throughout December, it's going to be hectic for me. I'm going to try and add pictures so someone will have some knowledge going into this where I had none. If someone can get a hold of a Bionic tutorial, this might be similar.
Currently talk and text works but 3g data drops out. It works when it's connected but wants to cycle off and on A LOT.
As a good rule of thumb, always try to backup your settings before modifying them.
DIAG MODE
Verizon Droid RAZR Diagnostic Mode How To
NOTES (semi based off Thunderbolt tutorial)
CDMA WS 3.5 or later will give you more options and another method of writing data profiles to the device.
QPST does work HOWEVER you cannot read and then write the original settings to the phone (after modification of course). You have to start fresh and write ONLY.
CDMA AUTO (PRL) MODE (info from RLockwich)
Go into *#*#4636#*#* - Went into phone information (Set to CDMA Only PRL, DNS check allowed, Query CFU enabled).
QPST
Add the port for the device if required under QPST configuration. It's going to be the DIAG port. Just check device manager to see what port that is.
Use the Service Programming application under the QPST folder to access the phone. Connect to it but don't read.
Now follow this tutorial to write the proper information:
http://www.cricketusers.com/flashing...s-cricket.html
Write to the phone. Reboot it once all the writing is done and catch the boot to put it back in DIAG mode. If you don't it's no big deal, but you will have to power it down and get it back in DIAG mode before continuing.
CDMA WS
Open up CDMA WS and connect to the port with the RAZR. Go to the security tab and send the SPC 000000. Then go to the memory tab and send the DROID NV items which can be found at whiterabbit.org. It should write the NV items and fix the data.
UPDATE: The following might be required
Go to the "Other" tab and navigate to "R-UIM" then click read.
Change it to "NV Only" and write to phone. It should say Successful
Close out CDMA WS and reboot the phone.
Phone Settings (info from RLockwich)
Go into the ##PROGRAM select option 14 for LTE I turned off LTE bppanic, LTE Movement detection, and disabled Class 1,2,2 APNS
Additional Instructions (info from RLockwich)
Just went through all the settings again, I hope everyone can have as much luck as I just did. I was thinking, and I remember seeing the end of the thunderbolt tutorial says the last step is to remove the 4G LTE microSIM. I had tried that before early on when I first flashed it, but when I removed the card, it showed No Sim, no network connection and a SIM symbol with a exclamation point. I just tried it again a hour ago...Pulled the SIM, showed no network and then I rebooted the phone... FIVE times on and off all with immediate and STABLE 3G at 10 minutes a time between rebooting. FIXED. Done messing with it.
UPDATE 12/19 - After this last post it's been 4 days since we cracked the 3G cycling issue, and my phone is working excellent! I'm very glad I was able to be a part of this and get credit work any work I put into this.
Dina's Notes:
Got everything working THANKS to Chris and RLokwich! Oh, and for those of you that are not yet successful with this flash, just re-read the entire thread. Everything you need is HERE!
It was not all smooth in the beginning.
Insights:
1) No need for BP tools. If your phone is on the homescreen, just connect it to the cable, choose PC mode and set up the port in HW.
2) Mine took like 5 master resets before 3g showed up. So in case you are pulling your hair as to why 3g not showing up, master reset the phone. Turn on wifi. Bypass activation screen (backwards C method works if you keep trying for like 2 minutes), go through the set up pages and 3g will be there.
Everything is stable so far. 3g working like a charm.
Discovered a secret!
If you do not get 3g up, make sure to Enable at least one APNs in the LTE settings (##PROGRAM menu)
Now time for some icecream
Read more: Full Flash Verizon Motorola RAZR to Cricket Wireless (talk, text, MMS, and Internet)
MMS (needs to be tested)
The only thing I've realized now that is wrong, is no MMS. I have MMS through the tutorial on bypassing the apn through GoSMS, but I would very much like to not have it to be that way. I thought early on in this flash that I did have MMS, I think I was just being a smart ass so I changed some settings in ##PROGRAM for the SMS/MMS part that I copied from the Thunderbolt tutorial. I don't know if I messed something up. I was also thinking I've seen people having two Cricket apns? One for internet and one for MMS, does anyone know if that may fix it? I was thinking it may be that, but in my apn for cricket already, I edited it and filled in all the MMS settings for that APN. Maybe that's something I did wrong, I don't know.
If anyone does have working MMS on their flashed Razr, please post anything that might help us. Please post all your settings in SMS/MMS in ##PROGRAM and into your APN edit settings for Cricket APN you have for MMS (if you have anything filled out in the MMS blanks)
##Program
Enter SPC "000000"
SMS/MMS Settings
MML Server Name
[email protected] > wap.mycricket.com
Address for Upload to Online Album
438749 > 111111
Maximum MMS message size (Byte)
1228800 > 228800
SMS to Email Gateway
Anyone? Currently set at 6245
Try adding an APN for Cricket's settings or modifying the existing APNs to reflect Cricket's MMS settings.
Click to expand...
Click to collapse
can someoen please send me their email if they have a solution and i will pay for it!! i add esn's to metros inventory they dont accept ones with 99xxxxxxxxxx . any help would be appreciated
Bionic fully flashed and all working 100% but only 1g. Tried all the posted tips. Any
I fully flashed my bionic to cricket and everything is working 199% EXCEPT I only have 1G PERIOD!!!
ANY ideas?
Thanks
99 imei #
You have a 15 digit imei number correct?
Just remove the last number and google for a meid or esn converter
Enter your 14 digit 99 # and hit enter
you should get a 256 #
Smiles and good luck!
Ok i need help. Im not new to rooting and roms however im no where near a pro. I have a sprint note 3 sm900p flashed to boost and activated by them (boost). I have had no data for 2 weeks aside from wifi. I have LITERALLY searched high and low EVERYWHERE including here and nothing has worked to restore it. So basically i rooted and played around with a couple touchwiz roms and then decided to go to temaseks cm 12.1 amd all was well for weeks. Then one day i noticed i didnt get 3g so i messed around with some settings and the best i could get was it to pop up and then disappear but at that point lte still worked so i was ok with that. I ended up flashing back to a stockish touchwiz and my phone kept trying to do the hands free activation that wouldnt work. prl update and profile update wouldnt work. (yes i have read high and low on fixes for those too, but anways no data at all. The crazy part is that my phone on the touchwiz roms shows 3g and 4g lte wherever they are available i just cannot connect to internet or anything else involving data. My wifi works and calling and texting works as well. So i called boost tried to explain to them i did a data reset cause i was having issues ##72786# and it messed my phone up because i didnt know what other reason to give. anyways they were adamant we try it to fix data so i do and then all of a sudden i dont have calls or texts or data so they have me do ##msl# and sure enough my mdn and my msid somehow get switched to some crazy 000000 numbers at the end and they have me reenter my phone number and msid and then phone reboots and calling and texting are fine again but still no data. So we hard reset ##786# and that did nothing but delete everything on the phone which i knew it would except it didnt fix my problem. then they give me a bunch of crap how they arent sure and that they will send me a new sim card (nned it for lte with sprint note 3 on boost) and that should fix my data 3g and 4g. Currently waiting for that card but dont think its going to fix anything. I have absolutely no more ideas on what to do. I have tried everything i can think of and searched a million different ways and cant find a single thread relating to my exact issue. PHone currently can make calls and texts as well as recieve and wifi works. but absolutely no 3g or 4g anymore except phone shows it in the status bar. SO PLEASE IF ANYONE CAN HELP OR HAS ANY IDEAS PLEASE PM me or leve a reply or ANYTHING....i just want to fix my data.
Anything at all?
Swoops read my thread...
boost Data Fixed
TW Roms Build Number N900PVPUEOC5
Well Im no Programmer But I got my data Boost mobile data working on my note 3 after i got the run around from boost
and sprint by trying to reset phone add this and add that. FIRST BEFORE YOU START U WILL NEED SOME APPS AND PROGRAMS ON COMPUTER
first switch over your phone number (MDN and MIN) by calling boost or do it over the internet. Then when they are good then we need to switch the phone over by going to setting by dial ##MSL# (Copy MSL number for later) boost rep will give it to u when setting your phone up.
After u can make a call and text your phone is connecting to network just have to get APN working to get data simple as that
1. I reccomend Installing A recovery CWM/TWRP By Odin (See Website) Then do a backup incase something get screwed up or deleted
2. Need MSL So u can edit setting (Call Boost or Hack It)
3. PRL Helper on Playstore (Flashes the Prl file)
4. Root Explorer or ES File Explorer might need SU Acess (see Rooting or Flash rooted Stock Rom by TWRP
5. Su access if not u find out how to root http://honai-android.blogspot.com/2013/11/how-to-root-galaxy-note-3-sprint-sm.html
6. Advance Signal Status is good to make sure your antenna is on the right setting mine was on gsm/CDMA which was wrong.
TW base Rom ( You wont be able to add or change the APN since the APN is not register to sprint APN in the sim.. Mine was locked to page plus phone but was baught as a sprint note 3. Dont know if it hardware related or Rom related but it would not save when changing the mcc and mnc numbers. Mine was locked to 311 and 00 and needed changed to 310 and 120 for sprint for those settings and would not change it would just delete it when trying to save it.
1. First u need to copy contents from carrier-GS4.zip over to the carrier folder from http://forum.xda-developers.com/showthread.php?t=2628452 thanks to him for uploading it.
2. Now when u reboot your notice it say sprint or Boost dont remember which instead of chameleon on service provider And now u can edit APN since the MCC and MNC is correct now.
3. You will have to go to APN folder in ##DATA# click edit and enter MSL.. For some reason u cant modify it in the Rom APN setting (Dont Understand Why) but u can in ##data#.
4. Now u can delete the old Apn setting and add new or correct APN Settings.
5.VVVV
Name= APN1 Boost Internet LTE
APN= n.boost.ispsn
MMSC= http://mm.myboostmobile.com
MMS Proxy= 68.28.31.7
Multimedia Port= 80
MCC= 310
MNC= 120
APN Type= default,supl,mms,fota,dun
APN Protocol= IPv4
APN Roaming Protocol= IPv4
Bearer= LTE
Save It
Add Anther One
Name= APN2 Boost Internet EHRPD
APN= n.boost.ispsn
MMSC= http://mm.myboostmobile.com
MMS Proxy= 68.28.31.7
Multimedia Port= 80
MCC= 310
MNC= 120
APN Type= default,supl,mms,fota,dun
APN Protocol= IPv4
APN Roaming Protocol= IPv4
Bearer= eHRPD
Save It.
If u cant add the APN through ##data# u can try the boost unversal boost fix at http://androidforums.com/threads/bo...al-boost-apn-fix-for-d2lte-builds-mod.840501/ through twrp. Then go back in ##DATA# to see if u can change the APN .
6. go to MMSC in ##DATA# and see if it correct say http://mm.myboostmobile and all that is correct.
7. Now check for currect prl since it can make your 4g not work if not current like mine was a old apn.
8. Download a current .prl file searching on here or internet u can find them. While searching I could find boost .prl 33030, Current is 33041 (2015), Sprint Prl is 55026 seems to work fine.. But put the file on the sd card and open prl helper app u downloaded and flash the prl (Your Phone Should Restart)
9. 4g should be working now mms text working
sprint activation does not work so u can ether disable it
10.Now u should make a TWRP backup.
TW ROMS Build Number N900PVPUEOH1 I dont know if this goes with all roms with this build number but I recently upgraded by Samsung Kies 3 to experiment with and did factory reset and found that APN seting are able to be change and can save it.
On ASOP Roms You cant update your PRL. So it not a bad idea to have a TW backup so u can update the prl time to time. But enough about that on ASOP roms there isnt much prob to modifing the APN to work it just some roms dont have the listing for the APN since sometimes its hidden. If u cant edit normally you can use Xshortcut From PlayStore or similar app. If that doesnt work you can also use boost unversal boost fix from above in TWRP to see if it worked. I used it before which added the necessary APN but if the radio messes up by not connecting automatically. You can erase the data on cell broadcast in the manage apps and it should fix any connection prob. I would recommend making a backup before flashing any thing from TWRP since u cant redo if it messes up. Thats about it so if it didnt work u can try other ways people posted on here. Just reboot and see if it stays connected.
I hope this helped anybody that been through hell trying to go through sprint and boost for help.
Thank you so much bro that did the trick have literally tried everything and was only able to get 4g no 3g. I knew about that fix but I didn't know it would work for the note 3 and it literally fixed everything thank you so much bro.
im glad it worked for u
I tryed this and got stuck on sprint logo? What did I do wrong?
luiseno
sorry for the late response but did u figure out the prob with your phione
can you show me the link that you downloaded and flashed? and what version note 3 do you have>
SIM Card
I am waiting for the SIM Card from Boost.
They told me that I should be able to get 3G without the SIM Card.
I was able to write the APNs for boost using different ROMs but I can't get 3G.
Maybe I do need the SIM Card to get both 3G and 4G LTE?
Ya they did that same thing to me because on their end ( which I'm sure they told you) your phone is receiving data and fully working according to their system data even though obviously it isn't just like mine wasn't. While I was waiting for the new sim card I did receive 3g and when the sim card came once i put it in and
They helped me walk through it I was right back at square one which is probably where you will end up even though I hope not for your sake. Either way do exactly what maximum overdrive ( I believe it was him) says in his post above. I only had to flash the boost mobile fix ( s3 thread I think but search will get you to it) via twrp to get LTE back but my phone wouldnt get 3g at that point. I was on temaseks rom. The zip file says it only works for touchwiz but I had other results as stated. My network went from unknown or chameleon back to boost. I then flashed the s6 port by sacs and played with the apns ( you can find info above) and manually do it. I did it through the data menu (##3282#) I believe that's what it is....I then got 3g and LTE then I flashed temaseks ROM again and only had LTE again. Then I flashed dirty unicorns and after toggling airplane mode a few times got the apns visible and edited in the boost apns and deleted the others rebooted and bang profit.... I have both 3g and 4g again... NO THANKS TO BOOST OR SPRINT..... I LOVE XDA!!
Sent from my SM-N900P using XDA Free mobile app
Hello all.. I have been scouring everywhere for a fix to my problem and I think this is it.. Quick run down of my situation..
I have a S900P (original owner) Sprint's coverage at my old house was **** so I bought out my contract and just put the phone in storage. FF to now. I get amazing 4G LTE at my new location. So I reactivate my note 3 with Boost. Everything is fine till I start playing round with flashing custom rom's, at which point I was unable to get ANY data service on ANY custom ROM. (deodexed stock ROM's worked fine). I've lost track of how many modem/baseband/software combos I have gone through but here's where I'm at now..
I am using the original Sprint SIM card which came with the phone.
I'm pretty sure at this point all I need to do is get a new SIM from Boost, and proceed from there using my current build. Please let me know if I'm on the right track, WAY off, or What.
As always THANKS XDA for your godliness!!
A few points of clarification...
My phone has not given me a boost splash in quite a while, only Sprint.
I had another strange issue 2 days ago while, after another failed custom ROM flash, upon unrooting and goig back to 100% stock OK2. I wasnt able to use their DATA/Voice services (no text or phone calls) However the 4gLTE never stopped working.
Need msl
---------- Post added at 01:03 AM ---------- Previous post was at 01:02 AM ----------
I have same problem when flashing cm
---------- Post added at 01:04 AM ---------- Previous post was at 01:03 AM ----------
Like my boot loader or modem is wrong but this phone not like Galaxy s2 epic touch were you have to flash kernels an modem to
Whenever I flash a custom rom like say darkwolf or freshrom s6 port everything works data, calls and mms everything except sending sms I can receive but not send them