So I recently just rooted my droid and I'm running the evileris firmware atm I'm really happy with everything except that my phone can no longer make phone calls. The sound during phone calls does not work and I think it may not work sometimes in the music player as well. It works when I plug in the headphones but when i take them out no sound.
Airplane mode and resetting do not fix this problem and the updates that I've tried flashing from [FIX] Audiofix. NEED TESTERS FOR NEW KERNEL in the Hero CDMA forum do not work either.
This phone worked fine before rooting and flashing and the problem is present on all the roms I've used. The update above simply hangs my phone at the bootscreen, no matter which one I use. (Maybe its written just for hero?)
Anyways I was hoping one of you guys could have a fix or maybe have also had this same problem? Thanks!
(from what I've read in the thread above it seems the issue is a bad kernel that hangs up or fails to reset so you have to do it manually, but resetting doesn't fix the issue for my. My problem is constant phone call audio loss)
UPDATE: I have done some more experimenting and it seems the only problem is from the in-cal speaker, because when I put speakerphone on it works fine. The problem lies with the front speaker (part that goes to your ear).
maybe your phone is broken?
I went back down to 1.5 root, works fine. Its an issue with 2.1 :/ So currently I have 2 nandroid backups, 1 of 1.5 and 1 of 2.1 so I'm just switching in between the two.
did you try....
Did you wipe before flashing? After flashing did you try *228 opt 1? This may help as it sorted my audio issues with another Rom.
im having this same problem and i have no clue why i have tried everything knows possible to fix this.
I wipe before each flash as well as each recovery haha. atm my setup is 2.1 evil eris for the weekends and 1.5root for the weekday when i actually need to make calls
*228 opt 1 did not work btw
I just make a new backup at the end of the week and recover to the other one, works like a dual-boot pc or a bootcamp mac. It works, but its getting kidna old I'd rather just have 2.1 for good haha.
Longtime lurker.....1st time poster....I just installed leak v2 (I was one of those that was too impatient to wait for root)...I had the same problem that everything worked fine except the phone had no in call sound. went through all the setting and found that TTY was set to full...I unchecked it and the sound came back. I know this may be simple...but it worked for me.
brianwin33 said:
longtime lurker.....1st time poster....i just installed leak v2 (i was one of those that was too impatient to wait for root)...i had the same problem that everything worked fine except the phone had no in call sound. Went through all the setting and found that tty was set to full...i unchecked it and the sound came back. I know this may be simple...but it worked for me.
Click to expand...
Click to collapse
yesss thank you this worked for me.
BrianWin33 said:
Longtime lurker.....1st time poster....I just installed leak v2 (I was one of those that was too impatient to wait for root)...I had the same problem that everything worked fine except the phone had no in call sound. went through all the setting and found that TTY was set to full...I unchecked it and the sound came back. I know this may be simple...but it worked for me.
Click to expand...
Click to collapse
I'm having the same problem... During a phone call, I get no sound / can't hear the person I am calling from the "internal speakers" (i.e. the one you hold to your ear during a call). If I switch to external speakers (i.e. loudspeakers) I can hear the person I'm calling...
What is this "TTY" setting that fixed this problem for you? Where can I find it and uncheck it?
I just bought a new car recently and when I try to pair my Fascinate with the car bluetooth, my phone slows down considerably, won't successfully complete calls, and eventually locks up, forcing me to do a hard reset. My car's bluetooth program locks up as well. One time I got an error message on my phone saying services.exe had to force close. At first I thought the problem was with the car, but my dad's Droid Incredible works beautifully on it.
My phone is rooted w/o lagfix, and has launcher pro. It's also been de-binged and has other basic bloatware removed. I don't use taskillers either. Any help or advice would be greatly appreciated, thanks!
I have been having this issue for a while now. I'm currently on stock ED01 and it is almost consistently happening when I end a call. After the call is over and I hang up, the phone does a silent FC with bluetooth being the cause (silent FC = 1 vibrate followed by 2 short vibrates).
When using the stock kernel, the FC is hit or miss. I can maybe get a FC after a 2nd call. When using ANY of the custom kernels built by the devs here, bluetooth will consistently crash after a call is over.
Just like the OP said, the phone will crash and will become very unresponsive. If the phone is responsive and I manage to turn bluetooth off then on again, it MIGHT connect back to the car.
It seems like no one else is experiencing this? Or maybe not a lot of people use bluetooth calling with their Fascinate? I went back to stock just to see if it was a kernel or ROM issue and while it works a bit better, it's still not 100% working. I'm hoping there is someone out there who has working bluetooth calling with their car. I had the T-Mobile G2x for a week and that phone worked perfectly (as far as bluetooth was concerned).
Anybody?
Bluetooth Crash After 1st Call is Ended
DeezNotes said:
I have been having this issue for a while now. I'm currently on stock ED01 and it is almost consistently happening when I end a call. After the call is over and I hang up, the phone does a silent FC with bluetooth being the cause (silent FC = 1 vibrate followed by 2 short vibrates).
When using the stock kernel, the FC is hit or miss. I can maybe get a FC after a 2nd call. When using ANY of the custom kernels built by the devs here, bluetooth will consistently crash after a call is over.
Just like the OP said, the phone will crash and will become very unresponsive. If the phone is responsive and I manage to turn bluetooth off then on again, it MIGHT connect back to the car.
It seems like no one else is experiencing this? Or maybe not a lot of people use bluetooth calling with their Fascinate? I went back to stock just to see if it was a kernel or ROM issue and while it works a bit better, it's still not 100% working. I'm hoping there is someone out there who has working bluetooth calling with their car. I had the T-Mobile G2x for a week and that phone worked perfectly (as far as bluetooth was concerned).
Anybody?
Click to expand...
Click to collapse
I'm also having this same problem with my Bluetooth crashing after my first call ends when using following:
ROM ComRom 1.3
Kernel TW with Voodoo Sound+BLN+UV+Misc tweaks 4/15 by jt1134
Radio ED04
2011 VW Jetta SEL (just purchased a few weeks ago)
I'm thinking to go back to stock as well but would prefer some kind of fix or even a workaround over doing that.
Yesterday I was able to make 3 calls with no crashes at all for the first time ever.
MIUIwiz 1.1
OTB kernel 1.6 - no mods in voltage control
ED04 modem
(No Longer Resolved) The ROM was the Problem with Bluetooth
DeezNotes said:
Yesterday I was able to make 3 calls with no crashes at all for the first time ever.
MIUIwiz 1.1
OTB kernel 1.6 - no mods in voltage control
ED04 modem
Click to expand...
Click to collapse
Excellent!!! Thank you for this! I already had the ED04 modem so that wasn't the problem. Last night I updated my kernel and this morning I tried again with no success so the kernel wasn't the problem. Later this morning, I loaded up the MIUIwiz 1.1 ROM and on the way home from work, I tested 4 calls and viola SUCCESS!!! ComRom 1.3 was the culprit and even though MIUIwiz is based on ComRom, somewhere along the line Bluetooth in the ROM was fixed.
Thanks again DeezNotes!
Edit: My problem is back as well now. Any ideas? Problem started last night when I attempted to make a second call while connected via bluetooth. I was able to make two calls this morning then upon ending the second call, I received the one long vibrate followed by two short indicating something crashed and then the phone would no longer connect.
On the same setup, the problem is back. Its actually a lot worse than before. I actually noticed crashes from Pandora when hanging up a call and Pandora wasn't even running (for days). Even after uninstalling Pandora, still get plenty of consistent crashes after hanging up a call. Interestingly enough, this is with an Audi, so hearing the issue is with a VW isn't far off from what I'm seeing since those cars are typically very identical.
I'm trying out a different phone on a different carrier [again] later this week. If all goes well, I'm going to chalk it up to Samsung and their lack of QC. I would say it's an Audi/VW issue, but I've successfully used the same features with a Blackberry and an LG G2x. Later this week I'll try the HTC Sensation and see how things go. Based on my experiences so far, this might be the last Samsung smart phone I'll ever get.
Bluetooth drivers issue - causing crashes.
Hello. found this thread whilst searching the internet for a related problem, just thought I'd add my experience on the matter.
The issue you are all experiencing is due to a bug in Broadcoms bluetooth stack. More specifically anything to do with listening for a bluetooth service then opening and closing a RFCOMM SPP connection to anything else (maybe a bluetooth OBD2 adapter) will cause either the BTLD process to consume 100% cpu (and make the device run slowly) or cause a kernel panic and reboot.
This is also related, but a slightly different bug (again Broadcoms drivers at fault):
http://code.google.com/p/android/is...rs&colspec=ID Type Status Owner Summary Stars
piemmmm said:
Hello. found this thread whilst searching the internet for a related problem, just thought I'd add my experience on the matter.
The issue you are all experiencing is due to a bug in Broadcoms bluetooth stack. More specifically anything to do with listening for a bluetooth service then opening and closing a RFCOMM SPP connection to anything else (maybe a bluetooth OBD2 adapter) will cause either the BTLD process to consume 100% cpu (and make the device run slowly) or cause a kernel panic and reboot.
This is also related, but a slightly different bug (again Broadcoms drivers at fault):
http://code.google.com/p/android/is...rs&colspec=ID Type Status Owner Summary Stars
Click to expand...
Click to collapse
that sounds really really technical. any ideas on what we can do to fix it?
Handsfree Bluetooth Problem is Back
My problem is back as well now. Any ideas? Problem started last night when I attempted to make a second call while connected via bluetooth. I was able to make two calls this morning then upon ending the second call, I received the one long vibrate followed by two short indicating something crashed and then the phone would no longer connect.
I have the same issue with ED05 de-bloated, stock kernel.
Has anybody found a solution?
I searched the internet and apparently many of Atrix owners are experiencing the same problem as me.
After upgrading to Gingerbread, my car does not automatically "connect" to my Atrix via bluetooth, i have to do it manually every time!
Theoretically there is an option under security that allows devices to connect to bluetooth even with the cell phone locked, and this should solve the problem, but it does not!
Just found out that even when i connect it manually, the connection drops in the middle of the phone call and i have to take the phone and use it without the bluetooth....
Have any of you guys had this problem? And does any one know how to solve this? Maybe changing basebands or ROMs?
I already tried different kernels (faux 1.2 and 1.6) and had no luck.
Thanks
I was having this issue with my headset and Alien ROM V3, but I upgraded to v4 last night and the problem is gone. Hope this helps.
I just found out another aspect of this error.
Me, and everybody else who is having this problem, also reports that even when we sync the cell manually on the car's stereo, the bluetooth just stop working in the middle of a phone call.
It's really a serious bug, and there are a lot of Atrix owners unhappy about this one...
Maybe if i start using another ROM, someone other than Motorola will have this fixed...
Just to keep you guys updated, i installed CM7 pre-beta 2 and bluetooth is working fine now.
It is a bug on stock gingerbread for sure...
I have a Galaxy S3 I9300 for a couple of weeks now and I love it, other than the fact that I keep having a strange issue with the Bluetooth connection with my carkit. I've been searching forums for similar issues and I found a variety of carkit related problems, but none of the ones I found describe the same problem as what I'm having:
- Initially the Bluetooth connection works fine and I can play music or make a call through the carkit just fine
- When I switch off the car's systems and don't use any apps on the phone in the meanwhile, and then start the car's systems again, it establishes the Bluetooth connection just fine again
- When I switch off the car's systems and I use other apps for a while and then start the car again, it won't work. Bluetooth does appear to connect, but after that it just doesn't play ball. When I try to play a song at this point, the phone shows the song is playing, but neither the phone nor the car audio produces any sound
So anyway, every morning before leaving to work and every evening before going home, I reboot my phone first. Then I step into the car and it establishes the Bluetooth connection just fine. But if I don't reboot the phone first, it just won't work. Now I guess I could setup a tasker profile to automatically reboot the phone, but I'd rather just get the problem fixed.
I run a Galaxy S3 I9300 with stock Android 4.1.1, rooted. I have already tried to run the "Bluetooth Fix Repair" app and afterwards had to pair the phone with the carkit again, but that made no difference.
Any help would be greatly appreciated!
*bump*
Some additional info:
This issue has now also happened a few times while driving. While music (through Spotify) was playing over the bluetooth carkit, it would sometimes just stop working when I opened a different app (like for example opening an SMS). Spotify was still running (and the song was still ongoing) and also the bluetooth connection still showed as being connected, but it just wouldn't produce any sound anymore.
Anyway, it seems clear to me that this is a bluetooth issue, but I have no idea how I can troubleshoot this beyond what I've already done.
I would be happy to pay whoever can fix this problem..
With an issue like you are describing it may be helpful to list the headunit model too. I do not own an S3 but I have a multimedia headunit (Pioneer AVH P4400BH) and have found that toggling my Bluetooth on and off will help the headunit to see the Bluetooth on my Android device. This may not resolve your issue though.
Another thing to consider, your headunit may have an update-able firmware. That said if your headunit does have an update-able firmware I would check out the procedure, ensure there is a way to roll back to your current firmware and try that. If your headunit was purchased at an electronics or and audio retailer you may wish to speak with them. Your issue may not be with your phone but with your headunit, but this should help as far as troubleshooting since your issue involves multiple devices.
ItzCrooK2UxD said:
With an issue like you are describing it may be helpful to list the headunit model too.
Click to expand...
Click to collapse
My car is a Renault Megane RS, the carkit was built in. I believe it's called Renault Carminat TomTom.
ItzCrooK2UxD said:
I do not own an S3 but I have a multimedia headunit (Pioneer AVH P4400BH) and have found that toggling my Bluetooth on and off will help the headunit to see the Bluetooth on my Android device. This may not resolve your issue though.
Click to expand...
Click to collapse
I've covered everything like that in about 100 different ways, none of which made any difference.
ItzCrooK2UxD said:
Another thing to consider, your headunit may have an update-able firmware. That said if your headunit does have an update-able firmware I would check out the procedure, ensure there is a way to roll back to your current firmware and try that. If your headunit was purchased at an electronics or and audio retailer you may wish to speak with them. Your issue may not be with your phone but with your headunit, but this should help as far as troubleshooting since your issue involves multiple devices.
Click to expand...
Click to collapse
Good point. It does have an SD card slot, but as far as I know that's only to update the maps of the navigation system. I'll see if I can figure that out.
Thanks for the tips!
By the way - I do think that it's unlikely that the carkit itself is the troublemaker. Especially because opening an SMS on my phone can trigger the whole thing to stop working (it doesn't happen every time, but it did happen several times). Please correct me if I'm wrong.
Apoc_ said:
By the way - I do think that it's unlikely that the carkit itself is the troublemaker. Especially because opening an SMS on my phone can trigger the whole thing to stop working (it doesn't happen every time, but it did happen several times). Please correct me if I'm wrong.
Click to expand...
Click to collapse
It is in fact very possible that it is your phone, but wanted to throw it out there that bluetooth headunits can be troublesome on their own. Now I am not familiar with your headunit, but does it save bluetooth IDs? Like on my headunit and many other aftermarket headunits, it will save 3 bluetooth devices. If it does, have you tried clearing other devices and moving your S3 to the top? Odd as it sounds this has made a difference for me. Also do you have other bluetooth devices in the car, such as the 3GS you mentioned?
Also a logcat of this happening would be beneficial. If you do not know how to pull a logcat there is an app on the market called catlog or alogcat. Both are free and are invaluable in troubleshooting a ROM issue. In short it tells a developer what is going on as far as events being triggered or failures within the ROM.
ItzCrooK2UxD said:
Now I am not familiar with your headunit, but does it save bluetooth IDs? Like on my headunit and many other aftermarket headunits, it will save 3 bluetooth devices. If it does, have you tried clearing other devices and moving your S3 to the top? Odd as it sounds this has made a difference for me.
Click to expand...
Click to collapse
Yeah I had read that too in some other thread (I went through just about every bluetooth related thread I could find, before I posted this topic). Mine saves up to 5. It didn't have anything in there except for my previous phone, which I had cleared. I also tried re-pairing the S3 several times, that didn't make any difference either.
Now, I just read somewhere that some people are having disconnection issues on the same carkit. In their case, in the end the problem turned out to be that their carkit will import all of their contacts from their phone (so you can call people even while your phone is in your pocket), and this would cause trouble when there are contacts without a phone number associated with it (just like my thousands of Exchange contacts). The people in question are talking about random disconnects though, whereas in my case it happens after doing some stuff on my phone. So it's probably unrelated, but I'll give that a try anyway just to rule it out. I just need to figure out a way to stop the carkit from importing contacts, because removing thousands of email contacts is obviously not an option.
I'll keep this topic updated with any progress. If anyone has any other ideas, please keep em coming. Thanks for the help so far!
ItzCrooK2UxD said:
Also a logcat of this happening would be beneficial. If you do not know how to pull a logcat there is an app on the market called catlog or alogcat. Both are free and are invaluable in troubleshooting a ROM issue. In short it tells a developer what is going on as far as events being triggered or failures within the ROM.
Click to expand...
Click to collapse
Didn't think of that, great tip, thank you! I do run the stock ROM by the way.
I've installed alogcat just now. Does it just keep running automatically in the background?
Apoc_ said:
Didn't think of that, great tip, thank you! I do run the stock ROM by the way.
I've installed alogcat just now. Does it just keep running automatically in the background?
Click to expand...
Click to collapse
It reads a file that is being constantly updated (which happens to be the logcat file). Typically I will clear it right before doing what it took to cause the failure, like in your case in your car with the bluetooth on.
I've got Audi with BT and S3 with custom rom and I've got similar problems with BT. It connects automatically but if I switch off BT in phone and switch it on again - it doesn't connect any more. I had this since I bought a phone and it was on all ROMs I used.
YoghurtPL said:
I've got Audi with BT and S3 with custom rom and I've got similar problems with BT. It connects automatically but if I switch off BT in phone and switch it on again - it doesn't connect any more. I had this since I bought a phone and it was on all ROMs I used.
Click to expand...
Click to collapse
Yep - I have that too. The weird thing is that in that situation the phone does seem to think it is connected, while it really isn't. Just to be clear: this is not the only way to cause this issue (because it also happens when trying to reconnect the Bluetooth while on the phone it hasn't been disabled in the meanwhile).
So far I haven't been able to pull anything related from the logcat.
Also, while reading up on common bluetooth issues, I came across some posts of people who were saying that some phone/carkit combinations are having trouble with 2-way communication (because I can stream music from the phone to the carkit, but I can also change a song using the carkit or initiate a phonecall from the carkit). I'm going to try to only use communication initiated from the phone, and see whether that makes any difference. In the meanwhile: does anyone happen to know anything about 2-way communication issues with bluetooth, and how to overcome such issues?
Update:
- Updated carkit to latest firmware. No change, still same problem
- Have not been able to capture anything unusual in the logs
- I have a Bose Soundlink now, which is a wireless speaker. Whenever my S3 is connected to the Soundlink (with bluetooth), wifi doesn't work. Upon turning off bluetooth, wifi instantly works fine again. So this definitely confirms this is a problem with bluetooth on the phone, not on the carkit.
- Wanted to upgrade to Android 4.1.2 but Samsung won't let me, as it says the device is modified (rooted). Triangle away isn't helping. Damn you, Samsung. This is *the* reason I moved away from Apple, as I don't like companies who don't let you use your stuff any way you like. And now Samsung is moving down the same route. Idiots. Anyway, I guess the only option left, is to start using a custom ROM.
Does anyone happen to have experience in terms of solving bluetooth problems by using a custom ROM? I'm thinking of using Cyanogenmod 10.1
In the meanwhile I have upgraded to Android 4.1.2: still the same problem.
I have also discussed this matter with quite a few other Samsung smartphone owners, and all of them appear to be having the same issue. Most of them just don't seem to be bothered to spend time on looking for a fix.
Also, I have figured out that this problem is specific to media streaming. I'm able to use my phone on the carkit for calls at any time, without having to reboot first. Only when I try to listen to music, the problem occurs.
Anyway, I have ruled out that this problem is specific to me or my devices - this appears to be a global issue. So I'm completely puzzled as to why there's not a lot more fuss going on about this.
If anyone has any more suggestions for a resolution of this problem, please share.
S3 bluetooth connection problem
Had the same problem with my S3 and renault megane III handsfree bluetooth system.(Arkamsys software version 2.2.0.19 auditorium)
I downgraded to 4.0.4 baseband I9300CELH1 (stock) and problem seems fixed
hope this helps.
Hi Bennes,
Thank you for your response.
I'm still dealing with this problem myself. All upgrades so far haven't made a difference. So far, I've been able to figure out that if I first initiate a phonecall, after hanging up, the audio streaming works (while before the phonecall it usually wouldn't). This works about 8 out of 10 times (the other 2 times it doesn't make a bluetooth connection at all). So what I've done, is to use Tasker and to automatically make it call my own phone number whenever bluetooth gets connected to the carkit, and hanging up after 3 seconds. But this is obviously far from ideal.
Do you know whether it is possible to change the baseband version without changing the firmware version? I wouldn't like to downgrade to an older firmware version, as I like the new features in the newer versions. I do also prefer to stick with the stock firmware, but that's not a requirement.
Carkit bluetooth issue
Apoc_ said:
Hi Bennes,
Thank you for your response.
I'm still dealing with this problem myself. All upgrades so far haven't made a difference. So far, I've been able to figure out that if I first initiate a phonecall, after hanging up, the audio streaming works (while before the phonecall it usually wouldn't). This works about 8 out of 10 times (the other 2 times it doesn't make a bluetooth connection at all). So what I've done, is to use Tasker and to automatically make it call my own phone number whenever bluetooth gets connected to the carkit, and hanging up after 3 seconds. But this is obviously far from ideal.
Do you know whether it is possible to change the baseband version without changing the firmware version? I wouldn't like to downgrade to an older firmware version, as I like the new features in the newer versions. I do also prefer to stick with the stock firmware, but that's not a requirement.
Click to expand...
Click to collapse
mmm, don`t know about baseband only. Try google.
I have read that after downgrade to 4.0.4 and then upgrade again to latest stock version, bluetooth connection keeps working.
I cannot confirm this as i am still on 4.0.4, but will get an update of the arkamsys radio to the latest renault firmware version next week and then start experimenting again. i will report back once i have new results
Bennes18 said:
mmm, don`t know about baseband only. Try google.
I have read that after downgrade to 4.0.4 and then upgrade again to latest stock version, bluetooth connection keeps working.
I cannot confirm this as i am still on 4.0.4, but will get an update of the arkamsys radio to the latest renault firmware version next week and then start experimenting again. i will report back once i have new results
Click to expand...
Click to collapse
BB only, try this :
http://forum.xda-developers.com/showthread.php?t=2106424
Confirmed the update thing, i have updated the S3 to version 4.1.2 BB I9300CEELL1 and have no bluetooth issue whatsoever, car audio still on 2.2.0.19 byt the way
Pretty strange ... , but glad its working !
I have the same issue with a Ford Focus =/
also, while using CM or Omega, the music title never changes.