How does one go about removing them? I've done a google and XDA-Forums search and found that there are numerous answers all seemingly discounted by any number of people:
toothpaste, no good for capacitive screens
Displex sure, THEY say it's good for the TP2, but so many people say not
So, anyone have any ideas.
And, yes, I know, screenguards are great and the holy grail. I don't have one. So, please, I know I am asking for a cause that I probably could have prevented, but every time I put a screenguard on my device, it was much too mushy and I tried a lot of them.
Thanks in advance.
I would also like to know how to remove the scratches on the screen. The screen guards make the touch screen less sensative. Theres got to be some type of wax or something.
I've used the screen guard that came with my TP2 since day one. My screen is still pretty darn sensitive....
I have skinomi on my tp2 and although it takes alot of patience to put it works flawlessly...ive tried scratching it with keys and the thing just wont scratch!! its awesome..its a bit on the expensive side if you get the entire skin for the phone like i did but its worth the money in my opinion.
go to skinomi.com
I guess T-Cut might work, i used it on my dads samsung and it cleared up the screen some.
When i was a kid we used to wear swatch watches which always got scratched up, we used to use Duraglit made by Brasso which is a metal polish wadding...kinda like cotton wool with a light abrasive in it, which worked wonders!
Something with very light abrasive properties(like toothpaste) should do it but watch out for any solvents and chemicals in the product that may react with or even MELT the plastic!!!!!
most things like T-Cut scratch remover just take a lot of time and patience.
I anything works for you re-post and let us know!
Actually Displex tells you not to use its product on resistive touch-screens.
Anyway, I just ordered iDrops about a week ago and have been trying it for the last day with no results, at all. I've tried variable amounts of pressure, dozens of applications as the instructions say and I've only hurt my phone. All it does it put a strange texture on your phone that makes it grainy and more susceptible to scratches. Even my stylus scratches the phone, now! I had to use a wet cloth to get the graininess away.
My recommendation is not to bother with iDrops. It seems to not work for the TP2.
Hmm, its just an idea but I've been repairing my windscreen today using special resin that cures in direct sunlight. I must say it works pretty well, it's hard to notice the repair. I would try t-cut or other mild abbrasive to get rid of light scratches and fill really bad ones with that resin. Next comes a good screen protector to hide any imperfections.
thanks, but WHAT website
spammmer said:
if your touch screen is very scratch or broken, you can just buy the new touch screen and then replace it, it is easy to do. I also has instruction. you can visit my website.
thanks
Click to expand...
Click to collapse
I see your post, yet, I have no idea what website to which you refer. Nevermind, didn't realize it was in your header.
Why do you not send instructions with the order? IF you're selling replacement parts why then must a customer have to contact you for replacement instructions?
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Not disputing that fact
petard said:
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Click to expand...
Click to collapse
Just questioning that if they sell the parts, why must the instructions be emailed separately?
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
BBM-Lee said:
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
Click to expand...
Click to collapse
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
petard said:
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
Click to expand...
Click to collapse
Correct me if I'm wrong but changing this digitizer would void warranty if I were to change it myself ? ?
Go to At&t and see if they will replace it for you if you buy the digitizer. If not ask At&t or find a reputable place that does, ive seen for around $50 which was suggested to me by at&t. It's worth the money trust me! When I had my old LG Incite, I tried replacing the digitizer because my screen was scratched and ended up breaking the lock and camera buttons as well as the touch screen. Since then every phone i've had gets a case and screen protector from the day I lay eyes on it. If the case and screen protector are their after I get my phone I wont use it till their on. Scratches just annoy me but I guess i'm just odd lol.
Related
I have been using my T-Mobile TP2 without protection on it for a while and have dropped it a few times. The screen is still perfect and the lower half (keyboard) has relatively no damage other than a few spots of chipped paint.
But the upper half, around the edges, has took quite a bit of damage. Mostly chipped pieces and dents, partially because of me dropping it and also because the bodyguard I was using previously damaged it! It was one of those crappy snap-on ones. Will never get one again, just bought ghost armor.
Anyway my question is what is the best way to repair the chipped pieces and dents or is that piece sold somewhere so I could replace it? I have no experience replacing things on the phone but I'm sure if there's a tutorial anywhere it wouldn't be too hard for me. Besides I"m not trying to disassemble the entire thing just the upper portion without the screen.
Any help appreciated.
Showtime7 said:
I have been using my T-Mobile TP2 without protection on it for a while and have dropped it a few times. The screen is still perfect and the lower half (keyboard) has relatively no damage other than a few spots of chipped paint.
Deleted stuff...
Any help appreciated.
Click to expand...
Click to collapse
Best option...Ebay>buy broken (software wise) TP2>use if for spare parts
hmmm the only cheap one I could find listed was also worn...
was hoping to profit because i will probably be selling my TP2 soon.
go to ebay and search touch pro 2 houseing case there about 80 bucks they come in balck and red and black and blue the are a little hard to swich over to but i did it and it worked out fine just takes about an hour tools and dremal if and only if ure useing the tp2 t7373
I am trying to locate a replacement front HW button (back key is either cracked or scratched and light shows through) - so, during the lcd repair process, is this button easily replaceable without getting too involved with any other components? Any suggestions or advice on what to do/where to locate this piece of plastic would be met with extreme gratitude!
Get a new housing from eBay.
Just be careful to get one that fits your version.
My phone was stolen at work on Friday, so I managed to scramble and find one at a good price on eBay and it arrived this morning.
While I did ask to see photos, and I expected some scuffs, the photos didn't do the device justice at all, as it's much worse than I expected. In all the time I've owned my devices, I've never dropped my phone once, not once! this thing's a disaster.
So I'll need to get a replacement housing. I've been looking at eBay but couldn't see anything except these ridiculous colored housings for teens and 20-somethings. Where do real adults get the housings from?
This is an excellent outer shell protector, gives better heft holding (IMHO), rubberized black, very lightweight. Just snaps on and off.
Auction ended, but locate seller store. My Tilt2 fit perfectly in the Touch Pro Verizon except camera button needed cutting shell (trivial task).
http://cgi.ebay.com/HTC-TOUCH-PRO-2...D-COVER-CASE-/130412358305?pt=PDA_Accessories
PDADoc said:
My phone was stolen at work on Friday, so I managed to scramble and find one at a good price on eBay and it arrived this morning.
While I did ask to see photos, and I expected some scuffs, the photos didn't do the device justice at all, as it's much worse than I expected. In all the time I've owned my devices, I've never dropped my phone once, not once! this thing's a disaster.
Click to expand...
Click to collapse
You could take it up with eBay for SNAD, probably get a refund depending on the exact wording of the add, but if it was really SNAD should do it.
So I'll need to get a replacement housing. I've been looking at eBay but couldn't see anything except these ridiculous colored housings for teens and 20-somethings. Where do real adults get the housings from?
Click to expand...
Click to collapse
Eh? On ebay? You have everything from the original HTC version to various carrier variations, search more/wider. They're 40-80$ though.
kosmarnik said:
You could take it up with eBay for SNAD, probably get a refund depending on the exact wording of the add, but if it was really SNAD should do it.
Eh? On ebay? You have everything from the original HTC version to various carrier variations, search more/wider. They're 40-80$ though.
Click to expand...
Click to collapse
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
PDADoc said:
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
Click to expand...
Click to collapse
Sorry man, but lern2internet. It's the first 4 hits on ebay. Just enter "htc touch pro 2 housing" and check 'worldwide'.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
eBay dispute process is tedious an long winded, but will lean towards the buyer in almost all cases. You just have to be patient.
PDADoc said:
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
Always pay with your credit card through PayPal. Ebay and PayPal suck at disputes; your credit card company is your fall-back and your best protection as well.
You can get OEM housings for $50-60:
http://www.parts4repair.com/products/Housing-for-HTC-T7373.html
Looks like it's kinda tricky to replace the housing (if you're going OEM)....
http://pocketnow.com/hardware-1/htc-touch-pro2-disassembly-assembly-training-videos
PDADoc said:
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
On ebay? i suggest amazon.
rete said:
Always pay with your credit card through PayPal. Ebay and PayPal suck at disputes; your credit card company is your fall-back and your best protection as well.
You can get OEM housings for $50-60:
http://www.parts4repair.com/products/Housing-for-HTC-T7373.html
Looks like it's kinda tricky to replace the housing (if you're going OEM)....
http://pocketnow.com/hardware-1/htc-touch-pro2-disassembly-assembly-training-videos
Click to expand...
Click to collapse
Great, thanks for the tip! I'll have to look into this closer, as I think if I go with the Touch Pro 2 OEM housing, there'll be a hole for the front-facing camera.
Maybe I'll just deal with it for now and keep my eyes open for an AT&T Tilt 2 housing somewhere. If it wasn't so beat up, I'd try a warranty exchange through AT&T; I was able to do it when I purchased a used BlackBerry Bold 9700 with no problem.
Can use HTC TP2 housing on T-Mobile TP2?
PDADoc said:
Great, thanks for the tip! I'll have to look into this closer, as I think if I go with the Touch Pro 2 OEM housing, there'll be a hole for the front-facing camera.
Maybe I'll just deal with it for now and keep my eyes open for an AT&T Tilt 2 housing somewhere. If it wasn't so beat up, I'd try a warranty exchange through AT&T; I was able to do it when I purchased a used BlackBerry Bold 9700 with no problem.
Click to expand...
Click to collapse
Hi there!
I've a T-Mobile Touch Pro 2 that is quite beat up too & I want to replace the whole housing.
Problem is where I'm living right now, the T-Mobile housing costs double of the standard Touch Pro 2 housing.
Is it possible to fit the motherboard, flex cable & LCD panel of the T-Mobile onto a HTC Touch Pro 2 casing with the power button?
I would need the touch screen & call/navigation buttons as well.
Please advise me if you know anything about this.
Thanks!
Konker
I'm afraid I don't know myself, but if you keep searching, I'm sure there is someone who's done it and knows for sure.
Take a look at this thread: http://forum.xda-developers.com/showthread.php?p=8580850#post8580850
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Movisman said:
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Click to expand...
Click to collapse
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
0semaj0 said:
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
Click to expand...
Click to collapse
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Movisman said:
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Click to expand...
Click to collapse
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
0semaj0 said:
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
Click to expand...
Click to collapse
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Movisman said:
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Click to expand...
Click to collapse
Hey Movis,
What did you end up doing for your dropped phone?
I too have dropped my phone on its corner and the chrome along with the plastic is now dented.
Another one with the same problem here. I managed to create a bump on the chrome bezel.
Can I bump this post as I've also just noticed a ding in the corner of the chrome bezel was wondering if anyone had found a solution to this yet.? short of replacing the LCD/digitiser which like OPs phone are working fine. It's just cosmetic damage.
I once was in a bad mood and snapped a screen and backing/housing in half.I can't remember exactly,but I'm thinking the chrome bit may be part of the thin metal casing/housing that is glue taped onto the screen.
You separate the screen from the housing by using a hot air gun sparingly.
If you look back at a motherboard thread I was involved in,a person on here called Roger put up a great video tutorial link that may answer all your questions...
Sent from my GT-I9100
Ah cheers for the reply. Had a look at the mobo post you were involved in followed it to the link and coincidentally that's the exact video I watched last night. Very good video good detail and instructions. But its the black one he is stripping down so he makes no reference to the bezel which afaik is only used on the white ones.
Sent from my GT-I9100 using xda premium
I've not seen the chrome bit listed separately,so I guess its part of the metal top housing that the LCD is glued to.I've got a white one and its got a ding on it too.
You could email Samsung to see if you can get the part,but I think its not worth risking cracking the screen and you probably couldn't resuse / would get that stupid gluey tape stuff.
Sent from my GT-I9100
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
vyks10 said:
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
Click to expand...
Click to collapse
Hi, will the heat actually damage the screen? I saw some posts mentioning about putting it into the oven and such. It sounded very intense but if it works without damaging the screen, i might give it a try. Facing the same situation as yours. Scratches and dents all over my front chrome bezel.
Hi
I have HTC Touch Pro 2 and today I broke its screen, it have 3 cracks on it now but strange touch screen is completely working without any problems. I also had screen protector on.
Now what do I have to do? Do I have to replace complete screen or I think I will just need to replace the screen digitizer?
Please guide so I can order it from ebay or if you could recommend any store from where I can buy quality products.
Thanks
Yep, been there done that. You have broken the digitizer glass most likely. I suggest that you get a LCD&Digitizer replacement from ebay like this one.
http://www.ebay.com/itm/LCD-Digitiz...172?pt=LH_DefaultDomain_0&hash=item2c62be3b24
Do some shopping around I only paid ~$12 for my replacement.
Learn from my mistakes and get the set. It is next to impossible to separate the lcd and digitizer. You can usually swap around the various kinds of lcds too. On my sprint tp2 I installed a at&t tilt screen with no issues.
It is not to bad of a job to replace, but the first time is a little nerve racking as you have to do a total tear down. There are videos on the tear down around online. If you live near Seattle WA, I can give you a hand.
wizardknight said:
Yep, been there done that. You have broken the digitizer glass most likely. I suggest that you get a LCD&Digitizer replacement from ebay like this one.
http://www.ebay.com/itm/LCD-Digitiz...172?pt=LH_DefaultDomain_0&hash=item2c62be3b24
Do some shopping around I only paid ~$12 for my replacement.
Learn from my mistakes and get the set. It is next to impossible to separate the lcd and digitizer. You can usually swap around the various kinds of lcds too. On my sprint tp2 I installed a at&t tilt screen with no issues.
It is not to bad of a job to replace, but the first time is a little nerve racking as you have to do a total tear down. There are videos on the tear down around online. If you live near Seattle WA, I can give you a hand.
Click to expand...
Click to collapse
Hi
Thanks, thats what I thought too, so your personal experience says its impossible to separate LCD and digitizer.. thats too sad as it can save me some money but I wonder why they are selling so many digitizers alone all over internet, and that is just for $8 to $10 with delivery.....
So finally you replaced both LCD+Digitizer or you were you able to replace just the digitizer?
and I live in Pakistan so I could only use help here or on any IM
Impossible, no. You will go through probably a dozen before you get to a point where you could separate them 50-75% of the time successfully. You will spend way less money if you get a screen set, or a phone with a bad board/esn number to pull parts from. There is an adhesive between the lcd and the digitizer (usually along the edge). The lcd does not have a protective glass layer, and it is sooooo easy to pull the lcd coating right off the lcd base it is not funny. You could tear apart the one you have as a free learning experience. It is not going to cost you anything but your time.
Saw this video
http://www.youtube.com/watch?v=SYqNlM68_as
Well if its just that then its a piece of cake for me too, Im a technical person.... So what Im going todo is to open my mobile first before ordering and try to separate the digitizer from the screen and if I was successful then I will just order the digitizer and if I was not then I will order a complete screen set like the one you mentioned in your link.
What is this 1st Generation screen and 2nd generation screen... I have the international unlock version of TP2... which one do I order?
craftsvision said:
What is this 1st Generation screen and 2nd generation screen... I have the international unlock version of TP2... which one do I order?
Click to expand...
Click to collapse
No idea.
Had a small hairline crack across the screen.
So I purchased a replacement glass,
watched several youtube videos on how to change the glass (phone was working perfectly)
came off no problem, very easy as a matter of fact.
replaced with new glass.
phone turns on, nothing goes on the screen.
what happened? did I ruin the digitizer?
never touched it with the razor knife one time but it did have a few flakes of glass on it so I lightly brushed them off with a hairless cloth.
what I do????
****.
it turns on and if I call it, it rings but dead screen.
how did I kill it?
it turns on and if I call it, it rings but dead screen.
how did I kill it?
Why did YOU fixed it yourself?
Anyway, check if all something is not connected...
that is the response I get? seriously?
I watched several videos, all said if you take your time, its easy. I took my time and it came off easy and went back in easy.
wondering what I could have done wrong. I do not think there are things that I needed to "hook back up" to get it to work correctly again.
somehow I fried the touch screen and I do not know why.
So, maybe I should be a bit more specific.
IF, you understand and know about how this would happen. Or if you are experienced in the build/construction of telephones and could shed some light on it for me I would appreciate it.
if you have no clue, I really do not need to hear it...
thanks
I'm not an expert but if it turned on before but now it doesn't, its dead jim. You probably heated it up too much. I think the suggested heat is 170-180 F.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
my second post. " IT TURNS ON but the screen does not."
I can call it and it will ring BUT THE SCREEN DOES NOT TURN ON!!!!
The screen is probably dead but I am hoping someone who knows about it can give me advice on how to maybe fix it.
that is the help I am looking for!
I believe only way to fix "it" at this point is to buy a new lcd which at this point youre better off buying one with the lcd-digi-glass. I say this because if there was a chance at slightly fixing a bad LCD it would involve hard work with tools beyond your reach and or experience.
Edit: Just out of curiosity, did you disconnect the LCD screen during the disassemble? Make sure its connected properly.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
pblocal said:
that is the response I get? seriously?
I watched several videos, all said if you take your time, its easy. I took my time and it came off easy and went back in easy.
wondering what I could have done wrong. I do not think there are things that I needed to "hook back up" to get it to work correctly again.
somehow I fried the touch screen and I do not know why.
So, maybe I should be a bit more specific.
IF, you understand and know about how this would happen. Or if you are experienced in the build/construction of telephones and could shed some light on it for me I would appreciate it.
if you have no clue, I really do not need to hear it...
thanks
Click to expand...
Click to collapse
Oi! Don't get snappy!
He was trying to help you!
Little sh*ts like you should get banned!
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
BHARGAV33 said:
Anyway, check if all something is not connected...
Click to expand...
Click to collapse
pblocal said:
that is the response I get? seriously?
Click to expand...
Click to collapse
Seems fairly sensible question to ask, especially when your providing so few details. When you checked the screen immediately after connecting it up did it work? If so it's entirely possible one of the connectors has worked loose during re-assembly, if not it's always possible that the new screen was supplied faulty.
I guess I owe an apology to whomever I offended. I was extremely frustrated by the fact I just killed my freaking phone and was hoping someone could tell me a specific thing or two to look for to make sure it was reinstalled correctly.
I was not looking for a, "why did you do it yourself type of statement. Obviously, hindsight tells me I should not have touched it. I understand that now. What I am/was looking for was constructive advice from someone who knows.
Honestly, I do not think there is anything that needs to be "re-hooked up". It was just the glass.
Here is another description, maybe someone who has done it before or knows the correct way to "re-hook it up" can explain a bit more in detail.
Yesterday, I tried to fix just the glass part of the phone, no electronic parts underneath. Just remove the broken glass and replace it with a new one.
I watched several in depth videos on youtube on how to do it. Very straight forward, easy/squeezy.
You heat the phone, use very thin items (razor knife) to very slowly remove the glass from around the edges. Do not tough the screen underneath at all.
I did just that. The screen came off much easier than anticipated. I was thinking I was golden.
Then I replaced everything the way it was, put the new glass back on. and turned it on and blammo, no more screen.
so, once again, I am requesting help from someone who has done this or who knows exactly what I should look for if I remove the new screen to see if something was replaced wrong.
thanks....
pblocal said:
I guess I owe an apology to whomever I offended. I was extremely frustrated by the fact I just killed my freaking phone and was hoping someone could tell me a specific thing or two to look for to make sure it was reinstalled correctly.
I was not looking for a, "why did you do it yourself type of statement. Obviously, hindsight tells me I should not have touched it. I understand that now. What I am/was looking for was constructive advice from someone who knows.
Honestly, I do not think there is anything that needs to be "re-hooked up". It was just the glass.
Here is another description, maybe someone who has done it before or knows the correct way to "re-hook it up" can explain a bit more in detail.
Yesterday, I tried to fix just the glass part of the phone, no electronic parts underneath. Just remove the broken glass and replace it with a new one.
I watched several in depth videos on youtube on how to do it. Very straight forward, easy/squeezy.
You heat the phone, use very thin items (razor knife) to very slowly remove the glass from around the edges. Do not tough the screen underneath at all.
I did just that. The screen came off much easier than anticipated. I was thinking I was golden.
Then I replaced everything the way it was, put the new glass back on. and turned it on and blammo, no more screen.
so, once again, I am requesting help from someone who has done this or who knows exactly what I should look for if I remove the new screen to see if something was replaced wrong.
thanks....
Click to expand...
Click to collapse
Right. Now that is much better. If you would have asked like this from the beginning, we would have helped you.
Now, I personally haven't done this before, but what did you heat the phone up with?
It's possible that you have de-soldered some contacts for the screen's ribbon cable. If you have done that, you may want to open up the phone and check. If that is the case, I'd send it to Samsung or a repair centre. Of course, you'll get the same questions as here, but they should be able to help you. You could always send it to http://mobiletechvideos.com and check if they can do things like that for you, after all, they are a universal repair service.
I hope this helps you a little bit.
Oh, and don't say thanks, click it (Each and every answer. Even mine!)
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
pblocal said:
it turns on and if I call it, it rings but dead screen.
how did I kill it?
Click to expand...
Click to collapse
Oh. By the way: bumping posts is against the community rules - It counts as spam. Next time I will report the post immediately.
I just searched xda, look what I found.
"Oh and one more thing to add. Do not get fooled into buying those "glass only" front panel replacement kits on ebay for $20-$30. You'll just end up with a nice conversation piece on how you got scammed out of $20-30. I do not even know why they sell those for, they even include these cheap ass tools making it look more legit, like there is somehow a way to actually replace it. It's a full on scam if you ask me. I feel sorry for the poor saps who pick up broken glass S3's on ebay for $350-400 thinking it will only cost them $30 bucks to replace the screen and they'll have a like new S3. Suckers....
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Bottom line, you need to purchase the LCD and Glass Digitizer as a complete assembly, around $200. To make life easier, you should buy it with the frame also, around $220-240 so you won't have to curse and ***** when you try to pull your old LCD and digitzer from your old frame,broken piece by piece. "
I am one of those suckers! I guess I need a new LCD/Glass Digitizer with the frame and then pay someone to do it correctly!
DAMN!!!!
pblocal said:
I just searched xda, look what I found.
"Oh and one more thing to add. Do not get fooled into buying those "glass only" front panel replacement kits on ebay for $20-$30. You'll just end up with a nice conversation piece on how you got scammed out of $20-30. I do not even know why they sell those for, they even include these cheap ass tools making it look more legit, like there is somehow a way to actually replace it. It's a full on scam if you ask me. I feel sorry for the poor saps who pick up broken glass S3's on ebay for $350-400 thinking it will only cost them $30 bucks to replace the screen and they'll have a like new S3. Suckers....
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Bottom line, you need to purchase the LCD and Glass Digitizer as a complete assembly, around $200. To make life easier, you should buy it with the frame also, around $220-240 so you won't have to curse and ***** when you try to pull your old LCD and digitzer from your old frame,broken piece by piece. "
I am one of those suckers! I guess I need a new LCD/Glass Digitizer with the frame and then pay someone to do it correctly!
DAMN!!!!
Click to expand...
Click to collapse
I'm glad you and the search engine have met
Yeah, that would explain a lot. I actually feel sorry for you, man. Good luck with getting that fixed!
yeah, the funny thing is, I searched all over google and did not think about searching here.
Why? I have no freaking clue. Just plain stupid of me.
I already sent an email request to mobiletechvideo.com. I hope they can fix it, if I send it to them.
Thanks for your helpful advice. This is what I was looking for.
(oh, and the repeat of the same statement from yesterday was not for a bump, it was a mistake. I did not see it so I posted it again. if you look it was only 5 minutes apart)
once again, thanks, I also hit your "thank you" meter!
pblocal said:
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Click to expand...
Click to collapse
that's not true though, it's just very difficult
Well finally broke my screen on my G3.. only appears that i broke the glass and not lcd/digitzer but from what I'm reading it's all sealed and not worth my time to try to separate?
I found this site that has LCD Screen and Digitizer Assembly with Front Housing (No Small Parts) for $89 which doesn't seem horrible. Just not sure what they mean by no small parts, I'm assuming they're referring to the cameras and motherboards.. Can anyone verify this is my best route? New to fixing phones, worked on plenty of small electronics just not a phone but I'm not near an upgrade and actually like this phone so replacing isn't an option.
Thanks for any help.. the broken section is causing my phone to do some wild things. =o/
steber04 said:
Well finally broke my screen on my G3.. only appears that i broke the glass and not lcd/digitzer but from what I'm reading it's all sealed and not worth my time to try to separate?
I found this site that has LCD Screen and Digitizer Assembly with Front Housing (No Small Parts) for $89 which doesn't seem horrible. Just not sure what they mean by no small parts, I'm assuming they're referring to the cameras and motherboards.. Can anyone verify this is my best route? New to fixing phones, worked on plenty of small electronics just not a phone but I'm not near an upgrade and actually like this phone so replacing isn't an option.
Thanks for any help.. the broken section is causing my phone to do some wild things. =o/
Click to expand...
Click to collapse
No, do not waste your time attempting to separate the glass from the LCD, you WILL break the LCD.
You would come out a little bit cheaper ordering the glass and LCD assembly alone BUT it can be kind of a hassle sticking that part down.
Ordering it with the frame/housing is 100% how I recommend going about the screen repair for a G3 since it comes glued to the frame/housing... it's less of a hassle you'd have to worry about. Just transfer all of the internals to the new frame and you're golden.
However, I will recommend that you order the screen from the link I provided below... as the warranty on this screen will be good for 1 year, plus it's even a little cheaper. They are just currently back ordered until the 7th, but it's well worth it for a 1 year warranty.
Good luck.
https://www.wholesalegadgetparts.com/product.php?productid=23575&cat=2424&page=1
steber04 said:
Well finally broke my screen on my G3.. only appears that i broke the glass and not lcd/digitzer but from what I'm reading it's all sealed and not worth my time to try to separate?
I found this site that has LCD Screen and Digitizer Assembly with Front Housing (No Small Parts) for $89 which doesn't seem horrible. Just not sure what they mean by no small parts, I'm assuming they're referring to the cameras and motherboards.. Can anyone verify this is my best route? New to fixing phones, worked on plenty of small electronics just not a phone but I'm not near an upgrade and actually like this phone so replacing isn't an option.
Thanks for any help.. the broken section is causing my phone to do some wild things. =o/
Click to expand...
Click to collapse
you are right, the small parts include camera, lcd foam, speaker, and so on, my customer had bought the vs985 lcd here, you can take a look, hope this will help you
My screen had a crack in it i had a tmo g3 layn round that had a bad sim reader so i jus swaped the motherboard and bam no more crack in my screen